DIGITAL CAMERA
Model 11-0013G & 11-0013Y
LIT #:98-0455/06-04
Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd
1
9/22/04 4:33:31 PM
Camera is especially designed to capture the memories of your best outdoor adventures,
as it is water resistant, dust resistant, shock resistant and rubberized to provide a sure
grip. Of course, with its auto flash and close focus capabillity, it will also deliver great
photos indoors as well.
Insert 2 AA alkaline or lithium batteries as indicated in the battery compartment on the
bottom of the camera. An SD card (optional) for additional photo storage may also be
installed in the card slot inside, with the notched corner on the left, towards the LCD
display.
Install Batteries
& (optional)
Memory Card
1
2
3
Press and release the power switch. When the live preview is displayed on the LCD, you
are ready to snap a picture. The default settings will provide optimum quality under most
conditions. However, we recommend reading the full manual to take advantage of the
many available options for different photo conditions and user preferences.
Turn On the
Camera
Before using the camera, please read the instructions contained in this manual and
take time to familiarize yourself with the camera’s operation and many great features.
Press the OK/Menu button, then the right arrow pad key to open the Mode Menu. Press
the down arrow twice to highlight “Set”, then use the right arrow to move over to the Set
menu list. Go down to “Language”, then press the right arrow. Select your language, and
press the OK button. The display returns to the Set menu. Keep pressing the down arrow
until you highlight “Date & Time” (go past “File Name”), then press the right arrow. In
the Date & Time setting screen, use the left/right arrows to select the date/time part you
want to change, then use the up/down arrows to set it. The letter at the end of the date
line sets the date format (Y/M/D first). The time can be set to a 12 or 24 hour format.
Press OK when finished setting the Date & Time.
Set the Menu
Language and
Date/Time
If you inserted an SD card earlier, format it before using the camera. Go to “ Format”
in the Set Menu, and press the right arrow key. Move down to “Yes” and press OK to
confirm you want to format the card. Press OK to exit all menus.
Format the SD
Card (optional)
4
Please note that although the camera is weatherproof (JIS Grade 4 water resistance),
it should not be used underwater, submerged, or washed with a strong stream of
water. Damage due to misuse is not covered by warranty.
3
2
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd 2-3
9/22/04 4:33:31 PM
Parts Identification
Press the shutter release button halfway down to set the autofocus (green AF light
comes on), then fully down when you are ready to take the photo. The frame marks in
the center of the LCD show the area used to set focus. For off-centered subjects, place
this frame over the main subject, press the shutter button until the AF light is on, con-
tinue to hold it, then move the camera to recompose your image before depressing the
shutter fully to snap the picture. Scene presets for landscapes, action, and portraits are
available, see “Inside the Mode Menu” for detailed instructions.
Take A Photo
5
1.
Shutter Release
2.
3.
4.
5.
6.
Viewfinder
Flash
Connector Cover
Lens
Press (hold) “Quick View” to review stored photos. The left/right arrow keys step back-
wards/forwards through the photos. The up/down arrow keys zoom in/out for close
inspection of photo details. To delete a photo during review, briefly press Quick View
(trashcan icon appears). Press the down key to choose Yes, then press the OK button to
delete the photo. To exit the photo review, press and hold Quick View.
Review and
Delete Photos
6
7
Self-Timer Lamp
Before connecting the camera, install the drivers from the CD-ROM if you use Win-
dows 98/98SE, and install PhotoSuite if you do not already have photo editing soft-
ware. Connect the supplied USB cable from your PC to the USB port under the con-
nector cover (above the strap). Press “OK” on the camera. If you have Windows XP,
just follow the onscreen directions/options. If you have Win 98 or 2000, open “My
Computer” on your PC. The camera is identified as a “Removable Disk”. Double click
this “disk” and open the folders inside. Select any or all of the “.jpg” files, and use “Edit
>Move (or Copy) to Folder” to save the photos to “My Pictures” or another folder on
your hard drive. Once transferred, you may disconnect the camera, and the files can be
opened, edited and resaved using the supplied PhotoSuite or any imaging software . See
“Downloading Your Photos Step by Step” for more details.
Connect To A
Computer &
Transfer Photos
7.
8.
9.
LCD Monitor
Power Button
Viewfinder
15. Quick View Button
16. Tripod Socket
17. Strap Bar
10. 4-way Keypad
11. OK / Menu Button
12. Battery Compartment Cover
13. Batteries (AA x 2)
14. SD Card Slot
5
4
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd 4-5
9/22/04 4:33:32 PM
#
6
7
8
Indicator
Icons
LCD Display Icons
Loading Batteries
Slide the switch towards the tripod socket as shown on the right,
then swing open the battery cover. Insert 2 AA Alkaline batteries into
the camera as indicated, then close the battery cover until it clicks.
Date Display
2004.06.20
FQ / NQ / EQ
Image Quality (compression)
Image Size (resolution)
2048x1536, 1600x1200,
1280x960, 1024x768, 800x600
9
Digital Zoom Bar
Self Timer
10
11
12
13
14
Macro
Sequence Shot (3 frames)
Movie Mode
#
Indicator
Icons
1
Battery Check
Inserting An SD Card
White Balance
2
Shooting Mode (Scene)
The camera stores 20-542 photos in the 16MB internal memory,
depending on resolution/quality settings (refer to the chart at the
back of this manual). To expand the available storage, you may add an
optional SD (“Secure Digital”) memory card, with any capacity up to
512 MB. The card is inserted into a slot in the battery compartment
as shown in the last diagram. Note that the “notched” corner is on the
left, with the metal connectors facing up.
15
16
17
18
Meter Pattern
Center
Average
3
4
5
Flash Mode
AUTO
“SD”
SD Card Inserted
# of Photos Remaining
ISO Setting
AUTO ISO100 ISO200 ISO400
[ 999]
Exposure Value (EV)
Auto Focus Area Indicator
-2 ~ +2
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd 6-7
9/22/04 4:33:33 PM
Taking A Photo
Using The Flash
Hold the power button for 2 seconds to turn on the camera. The LCD
monitor startup screen will appear, and the red flash charge indicator will
blink briefly. When you see the live image preview (1), the camera is ready
to shoot. Compose your photo on the LCD display (or use the viewfinder
if the LCD is hard to see or batteries are low). Press the shutter release half-
way down to set the autofocus on the central area indicated by the AF marks
(2). When focus is complete, the green AF light by the viewfinder comes
on, and the AF marks on the LCD will change from red to green (you can
snap a photo while the marks are still red, but it may not be sharp). For off-
center subjects, set focus with AF area centered on the subject, then move
the camera as desired, while continuing to hold the shutter release halfway.
Press the release down all the way when you are ready to take the photo (3).
The LCD will automatically show a quick review of the photo after you take it
(the review time can be changed in the Mode Menu settings). To turn off the
LCD to conserve battery power, press the Quick View button quickly twice
(holding it down changes to Photo Review Mode).
The default setting is “Auto Flash” when the camera is turned on, meaning the flash will fire only if needed, in low
1
light conditions. Pressing the right button on the 4-way keypad
(short pre-flash to reduce pupil size for portraits ), Flash On
for filling in shadows on a person’s face with the sun behind them), and Flash Off
conditions-useful in museums or theatres where flash is prohibited.) The icon corresponding to the current flash
setting is displayed on the LCD (see “LCD Display Icons”). NOTE: When on “normal” Auto Flash, no icon will be
seen. After taking a flash photo, there will be a delay of several seconds before the next photo may be taken, while
the flash circuits are recharging, .
will select other options: Red-Eye Reduction
(forces flash to fire in bright conditions-good
(will not fire in any light
2
3
Using The Macro Focus and Self Timer
Macro focus allow you to photograph close up subjects in a range from approx. 4” to 24” (10-
60cm). To set the camera to macro focus mode, press the left keypad button.
The macro/timer
menu will be displayed on the LCD. With the macro (flower) icon highlighted, press “OK” to select
it. The macro icon will be seen on the preview LCD. Be sure to hold the camera steady and wait for
the autofocus light when taking photos in macro mode. To return to normal focus range, press the left
key button, select macro again and press OK.
Once in the macro/timer menu, pressing the down keypad button will highlight the self timer op-
tions, which allow you to include yourself in a photo, with 3
Press OK with the desired time selected. With the camera set up on a tripod or sturdy level surface,
press the shutter release-the shutter will snap at the end of the time. The timer is also useful for avoid-
ing shaking the camera when taking night scene photos, as the camera will operate at slower shutter
speeds. To return to normal shutter operation, press the left key button, select the current timer , and
press OK.
Autofocus Area Frame
Using The Digital Zoom
Press the “T” (telephoto) key
on the arrow pad
to zoom in (up to 4x digitally). Pressing the “W” (wide)
or 10
second delays available.
key
after you start to zoom in will zoom back out towards normal magnification. NOTE: At high digital
zoom settings, the live preview image may appear “coarse” or soft due to real time processing limitations. This does
not represent the actual quality of the captured image, as you will see in the quick review after the photo is taken.
Once the AF indicator turns green, this confirms that focus is locked in and your subject will be as sharp as possible
in the final photo.
Macro/
Timer
Menu
9
8
Press Cancel while in the macro/timer menu to exit it without making a selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd 8-9
9/22/04 4:33:39 PM
Using The Top Menu
Using The Top Menu continued
Pressing the OK/Menu button
below the arrow pad will display the
Menu
Icon
Action
top menu selections on the LCD. There are 2 “Shortcut” menus, which allow
you to quickly change the photo size/quality or switch to movie mode, and a
Mode menu containing multiple settings arranged in groups or “tabs”. Press
the keypad button in the same direction of the icon for each menu to enter it.
The menus and their functions are :
Mode Menu
Opens additional menus as
described next.
Menu Selection
Display
Inside The Mode Menu-Additional Settings
After pressing the OK/Menu button to see the 3 top menus, use the right
keypad button to open the Mode Menu. Selections within the Mode
Menu are arranged in 3 groups, or tabs, as seen on the left column in the
Mode Menu screen. To select a menu group, use the up/down buttons.
Then press the right button to move to the second column, which shows
the items in that group. Again use the up/down button to go to the item
you want, then press the right key to move to the third column and see
the available settings for that item. Use the up/down buttons to select
the setting you want, then press the OK/Menu button to confirm. When
finished making your settings, continue to press the OK/Menu button
until you return to the normal display. The Mode Menu groups, and the
item/settings submenus within each, are arranged in the following order
(default settings are in bold):
Menu
Icon
Action
Movie Mode/
Still Photo
Mode
from photo mode Switches from still photo to movie mode for recording
video clips (avi format). Press the “up” arrow key again to
from movie mode return from movie mode to still photos.
Image Size &
Quality
Image (file) Size can be set from 2048x1536 down to
800x600 pixels in 5 steps. Larger image sizes provide higher
Mode Menu screen,
showing (from left)
Group, Item, and Set-
ting columns. Use the
4-way keypad to move
around within them in
any direction.
Note: only the first # is
shown in the size menu:
2048 x 1536
1600 x 1280
1280 x 960
1024 x 768
800 x 600
resolution (sharpness) but use more storage memory. Image
Quality can be set to “FQ” (fine quality), “NQ” (normal
) or “EQ” (economy). This affects the amount of .jpg file
compression, with FQ being the least compression/highest
quality/largest file. The smaller size/lower quality settings
will use less memory , if you know you will only make small
prints or email your photos.
11
10
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd 10-11
9/22/04 4:33:40 PM
Inside the Mode Menu-Groups/Items/Settings
Inside the Mode Menu-Groups/Items/Settings continued
Group
Item Settings
Description
Group Item
Settings
Description
1: Exposure Scene P (Program)
Standard auto exposure for normal photos
Cloudy
Manual setting for outdoor overcast or shade conditions
Manual setting for indoor tungsten (light bulb) lighting
Deeper zone of focus for extended sharpness from foreground to
background.
Tungsten
Landscape
Portrait
Manual setting for indoor fluorescent lighting
Normal color reproduction
Shallow zone of focus for photos of people-helps isolate subject from
background.
Fluorescent
Color
Mode
Color
Uses higher shutter speeds to help freeze motion
Action
Black & White
Sepia
For black and white only photography
Uses lower shutter speeds for better low light exposures
Night
Special effect for “antique” toned photo look
Enhanced contrast for overcast days or flat lighting
Average contrast for most scenes
Meter Center
Camera sets exposure based mostly on center of frame. Useful when
main subject and background brightness differ greatly.
Contrast Hi
Normal
Low
Average
Camera sets exposure based on overall image. No icon on LCD.
Reduced contrast for mid-day or other high contrast conditions
ISO
Auto
Light sensitivity will be set automatically from ISO 100 ~400.
Manual settings. Use higher ISOs only for low light conditions.
Provides manual under/over exposure adjustment in 0.3 EV steps
White Balance is automatically set for correct color reproduction
3: Set
All Reset No / Yes
Select “Yes” and press “OK/Menu” button to erase all user settings
and restore default settings
100/200/400
-2.0 ~ +2.0
Auto (A)
EV
Format No / Yes
Select “Yes” , then press the “OK” button to format (prepare) an
inserted (optional) SD card. Caution: this will erase all previouly
stored files on the card.
2: Color
WB
13
12
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd 12-13
9/22/04 4:33:40 PM
Reviewing and Deleting Stored Photos
Inside the Mode Menu-Groups/Items/Settings continued
To review (playback) your photos stored in the internal memory or SD card, press and hold the “Quick
View” button until the display shows your previous photo. Use the left/right keypad buttons to move
in backwards or forwards order through your photos. While a photo is displayed, pressing the “up”
button will begin zooming into (magnifying up to 4x) the image, useful for verifying that the photo
is sharp. Once zoomed, you may press “OK”, then use the 4-way keypad to view different areas of
the photo (press OK again to exit). After zooming in, you may press the down button to zoom back
out. Pressing the down button when the photo is displayed normally (not zoomed) will change to a
multiple photo overview (up to 9 at once), displaying thumbnail images of all photos. You can then use
the keypad to highlight a specific photo, and display it full screen by pressing the OK/Menu button. To
erase (delete) a photo during the review, briefly press (do not hold) the Quick View button. The Delete
menu will apppear, with a choice of One or All. Press the down key (select “One”), then OK to delete
only that photo. You will see a blinking “hourglass” as the photo(s) are deleted. Note that pressing the
OK button after selecting “One” or “All” photos will perform the deletion immediately, so be careful
not to select “All” if you have not transferred the photos to your PC first. When you are done review-
ing your photos, press and hold the Quick View button to return to the live preview display.
Group Item
Settings
Description
3: Set
Language
English/Spanish/
French/Deutsch/Ital-
ian/Portuguese
Selects the language displayed in all menus
Rec View
File Name
Off, 1, 2, or 3 Sec.
Sets duration of photo review display after a photo is taken
Reset or Series
File numbering for new photos after deleting all starts over at
“1” (Reset), or continues to advance from last # used (Series)
LCD
Brightness
Set to any of 7 levels
Sets display brightness. Left box=dimmer, Right box=brighter.
Middle box is normal level. Press OK to set.
Date &
Time
> to go to setup. Press Left/right keys move between fields. Up/down keys change
“OK” once set.
NTSC or PAL
1-Shot or 3-Shot
setting. Letter at end of date sets format: M, D, or Y first.
Video Out
Rec Mode
Affects video out signal. Set for your location’s TV system.
Sets number of photos taken each time shutter release is
pressed. 1-shot is normal single shot, 3-shot will take 3 photos
in a rapid series to capture an action sequence.
Review Menus
After pressing the Quick View button to enter Review mode, pressing
the OK/Menu button will enter the review set of menus. These oper-
ate in the same way previously described in the still photo mode menu
instructions (use the arrow pad keys to navigate to the desired menu,
press OK to confirm a setting), but with different menu items and
settings as follows:
Storage
Auto
Files are stored on SD card if inserted, internal RAM if not
Files are stored on the SD card only (must be inserted)
SD Card
Review Mode:
Top Menu Display
15
14
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd 14-15
9/22/04 4:33:40 PM
Review Menus continued
Review Mode Menu Settings continued
Group Item
Settings
Description
Menu
Icon Action
Sepia
Off / On
See Black & While description. With sepia tone effect.
Copies all internal memory contents to the SD card
Formats the inserted SD card, erasing all contents.
Slide Show
Automatically cycles through stored photos, beginning with the oldest. Press
the up arrow key to start the show. It will stop at the most recent photo taken
and return to normal review mode.
Copy to SD card No / Yes
Format
No / Yes
No / Yes
Info
Sets whether the information (file #, image size and quality, date/time) for
each photo is displayed or not during review mode. It does not permanently
affect the stored information.
3: Set
All Reset
Select “Yes” and press “OK/Menu” button to erase all user
settings and restore default settings
Language
As previously described in Photo Mode Menu section
As previously described in Photo Mode Menu section
As previously described in Photo Mode Menu section
As previously described in Photo Mode Menu section
Review
Mode Menu
Opens additional settings as described in the next section
LCD Brightness
Date & Time
Video Out
Review Mode Menu Settings
Group
Item
Settings
Description
Movie Mode-Operation and Menus
1: Play
Protect
Off / On
Setting to “On” blocks ability to delete photos until turned
“Off” again in this menu. Prevents accidental erasure.
From Photo mode, with the live preview displayed, press OK/Menu to go to the top menus. Press the up
keypad button to change to Movie mode. The movie icon will be displayed. Select “320” or “160”
Rotate
90 Degrees > or <
Rotates display of reviewed photo. Eliminates having to turn
camera to review shots taken with camera held vertically (full
length portraits, etc).
resolution by pressing OK/Menu, then the left key. Press the shutter release to begin shooting a video
clip (avi format), and press again to stop the video. To playback the video movie, hold down Quick View
until the display switches to Review (you will see the first frame of the movie). Press the shutter release
to start the playback. Press Quick View briefly to go to the Delete menu. When you are finished shoot-
ing videos, Press OK for the top menu, then the up button (still camera icon) to return to normal photo
2: Color
Black & Off / On
White
Creates additional B&W version (new file) from the current
review photo (allow several seconds). Original color photo file
is not affected.
mode. Please note the following menu/feature option differences for Movie mode vs. Photo mode:
17
16
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd 16-17
9/22/04 4:33:41 PM
System Requirements (Minimum)
OS: Windows® 98/98SE/2000/ME/XP
CPU: MMX Pentium® 200MHZ equivalent or faster (Pentium® III 500 MHz for PhotoSuite5™)
Memory: 32MB minimum (64MB recommended for PhotoSuite)
SVGA video card w/2MB VRAM, 800x600 screen display, 16 bit High color
200 MB available hard disk space (if installing PhotoSuite)
Internal USB Port
Movie Mode-Operation and Menus continued
In movie mode, all features and menu options are identical to those in
normal still photo mode with these exceptions:
• No scene preset options are available (landscape, portrait, etc).
• No rec mode options (3x sequence).
• The image size options available are 320x240 or 160x120. This sets the movie resolution per frame.
Changing to 160x120 resolution will provide 4x more recording time than 320x240, but at lower
quality. Frame rate is preset at 20 frames per second.
• No quality (file compression) options are provided.
• Before you begin recording a video, the counter in the lower right of the LCD shows the available
recording time in seconds (31”, 124”, etc).
• While shooting the video, the counter shows elapsed seconds.
• Digital zoom and macro focus are not available, flash is set to “Off”
• If the camera is powered off while in movie mode, it will return to still photo mode when turned
on again.
Software Installation
If you are using Windows 98, you must install drivers before connecting the camera to your PC. Insert the CD-ROM
into your computer’s CD drive; it will auto-run and the install screen will be displayed. Select “Install Driver”, then
follow the directions. After installation, restart your computer. Windows 2000, ME, and XP do not require drivers,
as the camera uses the USB mass storage standard , allowing the photo files to be accessed as if they were stored on
an external hard drive. For any Windows OS, if you are not already using photo editing software you prefer, you may
install Roxio PhotoSuite® from the CD-ROM. Be sure to read the “Release Notes” completely, noting any tips or
potential issues relevant to your PC configuration and OS.
Downloading Your Photos - Step by Step
1. Be sure the driver has been installed first if you are on Windows 98/98SE.
2. Turn on the camera and connect the supplied cable to the camera’s USB jack (open the
connector cover on the strap side of the camera), then directly to your computer’s main USB
port-do not use front panel/keyboard USB ports or unpowered “hubs”.
Note: If your PC will not play the .avi movie files in Windows Media Player, you may need to download a
newer version of the player from Microsoft.com (search for “media player download”). The movie files can also
be played back with the QuickTime Player, included with many computers, or available as a free download
from Apple.com.
3. The camera will display the Transfer screen, with the PC icon highlighted. Press “OK”, the
display will change to “Mass Storage”. If not, close all open programs, disconnect the camera,
restart your computer and try again.
Download
Screen
19
18
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd 18-19
9/22/04 4:33:41 PM
Downloading Your Photos - Step by Step continued
Downloading Your Photos - Step by Step continued
4. Open My Computer or Windows Explorer. The camera will be seen as a new “Removable Disk” with an unused
drive letter assigned to it. Double click this new “Disk” icon, open the “DCIM” folder inside, then any folder(s)
inside that (“100BUSHN” ,etc). Your photos are the JPEG files inside-they have the prefix “BUSH__” followed by a
number, same as seen earlier on the camera’s display when you review photos. Single clicking any file should show a
small preview image.
8. If you are new to photo editing on a computer, consult your software’s Help menu (PhotoSuite has extensive
built-in Help) for tips on using its features. Along with adjusting the brightness, contrast, sharpness and color
of your photos, you can resize the photo to fit the paper if you are printing, or save a smaller, low or medium
resolution file for email or inserting into documents. When you are ready to save your edited file, you may want
to use “Save As” and give it a more descriptive name than “BUSH0001”. Doing this also preserves the original
file as a backup to reopen and re-edit later. Make sure you have successfully transferred all the photos you wanted
to save before using “Delete All” on your camera to make room for new images.
5. Click “Edit>Select All” (or click on one photo, contol+click to select multiple photos), then “Edit>Copy to Folder”
(in Windows menus). Select an existing folder on your hard drive, such as “My Pictures”, or create a new folder (“2004
Vacation”, etc), then click “OK” to transfer copies of the photo files you want.
6. After the photos are transferred to your hard drive, you can disconnect the camera. Windows may produce a screen
warning that you have disconnected a USB device without stopping or ejecting the “disk” first (your photo files
will not be harmed). If so, check the box that adds an icon to your system tray or taskbar. Then next time you finish
transferring photos, you can click that icon first, and “Stop the USB Mass Storage Device” before disconnecting
the camera.
7. You’re now ready to open the photo files in any photo editing software. Just use File>Open and go to the folder
where you stored the photos earlier. If you are using PhotoSuite, select File>Open Photo, then use the “Look in”
pull down menu at the top of the Open window, select “My Computer”, select your hard drive, and double click
any photo in the folder where you copied the files from the camera. It is also possible to open and work with your
photos directly from the Outdoor camera while it is still connected.To do this with PhotoSuite, first follow steps 1-3,
then open PhotoSuite, select File>Open Photo and use the “Look in” menu to select My Computer, then select the
“Removable Disk”, and open the folders inside until you get to the JPEG photo files. If you choose to work this way,
from a connected camera, be sure that you save the photo (when you are done editing) to your hard drive, and not
the camera’s memory or card. To do this in PhotoSuite, after clicking “Done”, answer “Save Changes?” with “Yes”, but
then answer “Replace Existing File”? with “No” and use the “Save As” dialog box to save the edited photo in a folder
on your hard drive (“Save In>Local Disk”), not the “Removable Disk” (camera).
Using the Direct Printing (Pictbridge) Feature
The Outdoor Camera also supports direct printing from the camera to PictBridge com-
patible printers, without using a PC. It is recommended that you first read the direct
printing/PictBridge section of your printer’s manual. With the printer power on, con-
nect the supplied USB cable to the camera, then to the direct print USB port on the
front or side of the printer. The camera’s display should come on (if not, turn on the
camera). Select the printer icon (1), and press “OK”. After a brief delay while the camera
to printer communication is established, you should see the camera’s Print options menu
(2). Use the up/down keys as usual to select a print option, then press OK. The options
are (in order from top to bottom icon):
1. Print One (Use left/right keys to select the image, up/down to select # of copies you
wish to print. Press OK when ready to print.)
2. Print All Images (No/Yes). Prints all photos stored in camera.
3. Print Selected Photo from Thumbnail Review (use left/right keys to select a photo,
up/down to choose how many copies you want)
4. Print All Images as Index: prints thumbnails of all photos (“contact sheet”)
5. Exit print menu
1
2
21
20
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd 20-21
9/22/04 4:33:42 PM
Photo Storage Capacity Reference (max capacity, +/- 2 photos)
TWO-Year LIMITED WARRANTY
FCC Note:
Your Bushnell® product is warranted to be free of defects in materials and workmanship for
two years after the date of purchase. In the event of a defect under this warranty, we will,
at our option, repair or replace the product, provided that you return the product postage
prepaid. This warranty does not cover damages caused by misuse, improper handling, in-
stallation, or maintenance provided by someone other than a Bushnell Authorized Service
Department.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
Image Size Megapixels Quality * Internal
64 MB
* Selects amount of file compression
(jpg ratio)
(FQ=low/EQ=high)
FQ: Fine Quality (1:2.5)
NQ: Normal Quality (1:5)
EQ: Economy Quality (1:10)
(approx)
Memory SD Card
2048x1536
1600x1280
1280x960
1024x768
800x600
3.2
FQ
NQ
EQ
FQ
NQ
EQ
FQ
NQ
EQ
FQ
NQ
EQ
FQ
NQ
EQ
10 photos
20
39 photos
79
Any return made under this warranty must be accompanied by the items listed below:
1) A check/money order in the amount of $10.00 to cover the cost of postage and handling
2) Name and address for product return
3) An explanation of the defect
4) Proof of Date Purchased
41
158
64
Image Size refers to the pixel
dimensions, or resolution, of the
digital file.
2.1
1.3
0.8
0.5
16
33
129
259
101
202
405
158
317
634
259
519
1038
5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit,
with return postage prepaid to the address listed below:
Actual storage capacity will vary
based on content of each photo
file. You may be able to take a few
photos more or less than the listed
average capacity.
67
· Reorient or relocate the receiving antenna.
IN U.S.A. Send To:
Bushnell Performance Optics
Attn.: Repairs
8500 Marshall Drive
Lenexa, Kansas 66214
IN CANADA Send To:
Bushnell Performance Optics
Attn.: Repairs
25A East Pearce Street, Unit 1
Richmond Hill, Ontario L4B 2M9
·
Increase the separation between the equipment and receiver.
26
· Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV
technician for help.
53
Use large size and high quality
settings for photos you may want
to enlarge or crop later. If required,
they may also be reduced to a
smaller file size using your photo
software. Use small size and/or low
quality settings if you will only
email, insert into documents, or
make small prints, and do not want
to resize the file later.
106
41
For products purchased outside the United States or Canada please contact your local dealer
The shielded interface cable must be used with the
equipment in order to comply with the limits for a digital
device pursuant to Subpart B of Part 15 of FCC Rules.
for applicable warranty information. In Europe you may also contact Bushnell at:
BUSHNELL Performance Optics Gmbh
European Service Centre
82
MORSESTRASSE 4
D- 50769 KÖLN
GERMANY
Tél: +49 (0) 221 709 939 3
165
67
Specifications and designs are subject to change without
any notice or obligation on the part of the manufacturer.
Fax: +49 (0) 221 709 939 8
135
271
This warranty gives you specific legal rights.
You may have other rights which vary from country to country.
©2004 Bushnell Performance Optics
23
22
Download from Www.Somanuals.com. All Manuals Search And Download.
11-0013 1LIM.indd 22-23
9/22/04 4:33:42 PM
|