Brother Label Maker LN7808001 User Manual

[GETTING STARTED]  
REFERENCE  
3
PREPARATION  
Tape Cassettes  
OPERATION  
1
2
Keyboard & LCD  
Troubleshooting  
Make sure that the power is turned off when replacing a tape cassette.  
Error message  
Width  
Style  
Size  
Message  
Cause/Remedy  
Open the tape compartment cover by lifting up both sides at the same time.  
If a tape cassette is already installed, remove it by pulling it straight up.  
Battery Weak!  
Check Battery!  
Invalid!  
The batteries are weak.  
The installed batteries are about to run out.  
Cursor  
• There is no text above the cursor when you set Numbering.  
• Invalid character is selected for Numbering.  
USER'S GUIDE  
Underline/Frame  
Label Length  
Caps  
• Invalid number is selected for Tab Length or Label Length.  
Tape cutter lever  
Insert a tape cassette, making sure that it snaps into place.  
No Text!  
You tried to print a text file when there is no data stored in  
the memory.  
LN7808001  
Printed in China  
• The Print key is pressed when no text is entered.  
You tried to set Copies, Numbering or Mirror when no text  
is entered.  
End of tape  
Toothed Wheel  
Line Limit!  
You tried to enter a 3rd line by pressing Enter key.  
You tried to print a 2 line text when 3.5mm or 6mm tape is  
installed.  
Tape compartment  
cover  
INTRODUCTION  
With your PT-1830, you can create labels for any application. Select from the  
many frames, character sizes and styles to design beautiful custom labels. In  
addition, the variety of tape cartridges available allows you to print labels with  
different widths and exciting colours.  
Favourite keys  
No Cassette!  
Cutter Error!  
Full!  
You tried to print a label when there is no cassette installed.  
Tape cutter lever is used in the middle of printing process.  
Function key  
Power key  
Tape guide  
The maximum number of characters (80 characters) have  
already been entered.  
Print key  
Read this manual carefully before starting and keep the manual in a handy  
place for future reference.  
Text Too Long!  
No Frame OK?  
The text length exceeds the selected label length or the  
selected Auto Format setting length.  
Cursor/Esc/  
OK key  
Preview key  
Printing on 3.5 mm tape with invalid Frame setting ON.  
• Make sure that the end of the tape feeds under the tape guides.  
• If the ink ribbon is loose, use your finger to wind the toothed wheel in the  
direction of the arrow on the cassette.  
After you have installed the tape, feed the tape (see Feeding) once and then push  
in the tape cutter lever to cut the tape.  
Backspace key  
Character keys  
(Select  
to print with no Frame,  
to cancel.)  
GENERAL PRECAUTIONS  
Tab key  
Caps key  
Enter key  
Shift key  
• Use only Brother TZ tapes with this machine. Do not use tapes that do  
What to do when...  
Shift key  
not have the  
mark.  
Problem  
Solution  
Symbol key  
Auto Format key  
Accent key  
Space key  
• Do not clean the machine with alcohol or other organic solvents. Only use  
a soft, dry cloth.  
Securely close the front cover, making sure that it snaps into place.  
The display stays blank • Check that the batteries are correctly inserted.  
after you have turned on • If the batteries are weak, replace them.  
the machine.  
The machine does not • Check that the tape cassette has been inserted correctly.  
print. • If the tape cassette is empty, replace it.  
• Do not touch the print head mechanism. Use a soft wipe (e.g. a cotton  
swab) when cleaning the print head.  
• Check that the suggested adaptor is correctly connected.  
• The LCD shows one row of 15 characters; however, the text that  
you enter can be up to 80 characters in length.  
Power Supply  
• To avoid injuries, do not touch the cutter's edge.  
• Use  
while holding down Shift key to go to beginning/end of the text.  
The printed characters • The batteries may be weak. Replace them.  
• To prevent damage or breakage of the glass, do not press hard on the LCD  
display.  
Make sure that the power is turned off when replacing batteries.  
are not formed properly,  
or the printed characters  
are blurred.  
Initial Setting  
• Do not put any foreign objects into or heavy objects on the machine.  
Turn the machine over and remove the battery compartment cover.  
The memory has  
cleared on its own.  
• The batteries may be weak. Replace them.  
• Do not leave any rubber or vinyl on the machine for an extended period of  
time, otherwise the machine may be stained.  
If batteries are already installed, remove them.  
Start your machine  
Supply power by using six AA batteries or the optional AC adaptor, and then  
A blank horizontal line  
appears through the  
printed label.  
• There may be some dust on the print head. Remove the  
tape cassette and use a dry cotton swab to gently wipe the  
print head with an up-and-down motion.  
• The print head can be cleaned more easily if the optional  
print head cleaning cassette (TZ-CL4) is used.  
press  
.
• Do not get the machine wet, such as by touching with wet hands or spilling  
beverages on to the machine.  
Set the language (English/Spanish/French/Portuguese)  
Insert six new AA-size alkaline batteries (LR6), making sure that their  
poles point in the correct directions. Always replace all six batteries at the  
same time using brand new ones.  
• Do not expose the machine to extremely high temperatures or high  
humidity. Never leave it on the dashboard or in the back of your car, near  
heaters or other hot appliances. Keep it out of both direct sunlight and rain.  
The machine has  
Turn off the machine, and then while holding  
"locked up" (i.e., nothing  
happens when a key is  
pressed, even though  
the machine is on).  
down  
and  
, press  
and  
to turn the machine back on.  
Choose a language with  
and press  
/
.
• Avoid using the machine in extremely dusty places.  
Finally, release  
.
Battery compartment  
cover  
Set the unit (inch/mm)  
• Do not pull on the tape being fed from the P-touch, otherwise the tape  
cassette may be damaged.  
• Do not attempt to cut the tape while printing or feeding since this will  
damage the tape.  
Specifications  
Choose a unit with  
and press  
/
.
• Do not try to print labels using an empty tape cassette set in the P-touch.  
Doing so will damage the print head.  
Item  
Specification  
• The machine automatically turns off if no key is pressed within 5  
minutes.  
Dimensions  
Weight  
173 mm (W) × 222 mm (D) × 62 mm (H)  
590 g (without batteries and tape cassette)  
• Remove the batteries and disconnect the AC adaptor if you do not intend  
to use the machine for an extended period of time. (Note: When power is  
disconnected for more than three minutes, all text shown in the display and  
any text files stored in the memory will be lost. Language and unit settings  
will also be cleared.)  
• To cancel operations, press  
.
Power supply  
Six AA-size alkaline batteries (LR6) or optional AC adaptor  
(model AD-5000)  
• To initialize the settings, turn off the machine and then while  
Tape cassette  
Brother TZ tape (width) :  
3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm  
holding down  
Finally, release  
and  
and  
, press  
.
to turn the machine back on.  
Attach the battery compartment cover by inserting the three hooks at the  
bottom into the slots on the machine, then pushing down firmly on the  
cover until it snaps into place.  
<Note> The text and formats in the display and all text files stored  
in the memory are erased. Also, the language and unit set-  
tings will be cleared.  
• Do not use old and new batteries together or mix alkaline batteries with  
other type batteries, or set the positive and negative end in the wrong  
position. Otherwise, the batteries may leak or be damaged.  
Accessories  
(Supplies may differ by distribution.)  
• Use only the suggested AC adaptor for this machine to prevent any  
damage or failure.  
Accessories  
Stock No.  
Creating Labels  
Tape Cassettes  
AC Adaptor  
See the attached TZ Tape Catalogue.  
model AD-5000  
When using optional AC adaptor (model  
AD-5000)  
Insert the plug on the adaptor cord into  
the adaptor jack on the right side of the  
machine.  
Insert the plug into the nearest standard  
electrical outlet.  
Be sure to use scissors to cut the fabric tapes. The built-in cutter can-  
not completely cut the fabric tapes.  
For memory back up, we recommend using  
AA-size alkaline batteries (LR6) together  
when using the AC adaptor.  
See the reverse side for steps of creating labels.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Switch P75470ea User Manual
Belkin Welding System F5L005 User Manual
Black Decker Convection Oven CTO4400B 01G User Manual
Bose Speaker System 901 Series II User Manual
Braun Trimmer PT10 User Manual
BRK electronic Smoke Alarm 5919 5919 TH User Manual
Campbell Hausfeld Car Stereo System DH3200 User Manual
Casablanca Fan Company Home Theater Server W 85 User Manual
Chamberlain Garage Door Opener WD822KD 1 2 HP User Manual
Chrysler Automobile CHEROKEE SRT8OWNE User Manual