Brother Label Maker LN0617001 User Manual

®
LN0617001  
Installing/changing the Cleaning the print  
Before using the P-touch, read this instruction leaflet, and then keep it  
in a handy place for future reference.  
tape cassette  
head  
1) Remove the back cover by pressing in the rough  
area at the top end of the machine and pulling off  
the cover.  
When dust accumulates on the print head, blank hori-  
zontal lines appear through the printed label. If this  
occurs, clean the print head.  
With this machine, use only tape cassettes bearing the  
logo.  
TAPE  
For a list of the tape cassettes that can be used with this machine,  
refer to Accessories at the bottom of this page.  
55  
2) If a tape cassette is already installed, remove it by  
pulling it straight out.  
3) Make sure that the end of the tape feeds under the  
tape guides as shown below. (Fig. 4)  
If you are installing a new tape cassette, be sure  
to remove the paper tab.  
1) Turn off the P-touch.  
2) Remove the back cover by pressing in the rough  
area at the top end of the machine and pulling off  
the cover, and then remove the tape cassette.  
3) Use a dry cotton swab to gently wipe the print head  
and the rubber pinch roller with an up-and-down  
motion. (Fig. 7)  
4) Insert the tape cassette, and then attach the back  
cover by inserting the two hooks on the bottom end  
of the cover into the matching slots on the bottom  
end of the machine, then pushing down firmly on  
the cover until it snaps into place.  
The stylish and portable PT-55 allows you to quickly and easily print labels anywhere you go. Simply switch on the P-touch,  
enter the text, and then print out your label. You can also choose from various character sizes, styles, and framing/background  
patterns in addition to underlining. In addition, you can specify the length of the label. The text can be printed on either one  
or two lines and can include special symbols and accented characters. Various tape colours and two tape widths (9 mm and  
12 mm) are available for creating personalised labels.  
4) Insert the tape cassette, making sure that it snaps  
into place.  
Make sure that the tape cassette fits properly  
around the two guides in the cassette compart-  
ment. (Fig. 5)  
Care and precautions Installing/replacing  
Clean the machine using only a soft, dry cloth.  
5) Attach the back cover by inserting the two hooks on  
the bottom end of the cover into the matching slots  
on the bottom end of the machine, then pushing  
down firmly on the cover until it snaps into place.  
(Fig. 6)  
batteries  
Use only AAA-size (LR03) alkaline batteries.  
5) Turn on the machine, enter some text, and then  
press R.  
6) If blank lines still appear in the printed label, repeat  
steps 1 through 4 using a cotton swab dipped in  
isopropyl (rubbing) alcohol.  
1) Remove the back cover by pressing in the rough  
Do not expose the machine or the tape cassettes to  
area at the top end of the machine and pulling off  
high temperatures, high humidity, or excessive dust.  
the cover. (Fig. 2)  
If you do not intend to use the machine for an  
2) If a tape cassette is already installed, remove it.  
extended period of time, remove the batteries.  
Do not touch the tape cutter button while printing.  
Do not touch the cutter blade.  
For details on removing the tape cassette, refer  
to Installing/changing the tape cassette.  
3) If batteries are already installed, remove them.  
4) Insert four new AAA-size (LR03) alkaline batteries  
as shown below. (Fig. 3)  
The amount of tape remaining in the cassette is  
visible through the window in the back of the P-  
touch.  
When green tape is fed out, the tape cassette is  
empty.  
Thermal print head  
Rubber pinch roller  
Do not block the tape exit slot. (Fig. 1)  
Do not put labels in your mouth.  
Do not affix labels to skin.  
Be sure that the two batteries on the left side of  
the P-touch are inserted with their positive poles  
pointing toward the bottom end of the machine  
and that the two batteries on the right side of the  
P-touch are inserted with their positive poles  
pointing to the top end of the machine.  
CAUTION  
Be sure to use only the tape cassettes listed in  
Accessories.The following tape cassettes can NOT  
be used with the PT-55 (i.e. tapes with a metallic  
appearance):  
Always replace all four batteries at the same time  
using brand new ones.  
Fig. 7  
M-531, M-731, M-831, M-931, M-E31, M-521, M-721,  
M-821, M-921 and M-E21  
5) Insert the tape cassette.  
For details on inserting the tape cassette, refer  
to Installing/changing the tape cassette.  
6) Attach the back cover by inserting the two hooks on  
the bottom end of the cover into the matching slots  
on the bottom end of the machine, then pushing  
down firmly on the cover until it snaps into place.  
Accessories  
Fig. 1  
The following accessories are available for the PT-55.  
Cassettes with 8-meter long tape  
12 mm  
9 mm  
Tape guides  
Guides  
Black characters on white adhesive M-K231  
M-K221  
M-K222  
M-K223  
M-K521  
M-K621  
Red characters on white adhesive  
Blue characters on white adhesive  
Black characters on blue adhesive  
M-K232  
M-K233  
M-K531  
Fig. 4  
Tape cutter button  
Black characters on yellow adhesive M-K631  
Back cover  
Fig. 2  
Right side  
Left  
Fig. 3  
Fig. 5  
Fig. 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Beko Washer WKB 61031 PTM User Manual
Black Box Network Hardware 1 Port T1 E1 Ethernet Network Extender Kit User Manual
Black Decker Sander 90532198 User Manual
Braun Juicer 4161 User Manual
Breville Slow Cooker BSC560XL User Manual
Briggs Stratton Trimmer 73455 User Manual
Britax Car Seat Roundabout User Manual
Carrier Heat Pump 38YRA User Manual
Casio Calculator 304 User Manual
Christie Digital Systems Projector 3308 VIV303 01 User Manual