FAX-8360P
Quick Setup Guide
Packing List
THANK YOU!
1
… FOR PURCHASINGYOUR BROTHER MACHINE.
WE ARE SURE YOU WILL BE IMPRESSED WITH THE CONVENIENT WAY THAT
YOUR NEW MACHINE PERFORMS SO MANY TASKS WITH GREAT RESULTS!
Document Support
Drum Unit Assembly
(TN-6300)
Follow these simple instructions in numerical order.
Mains Power Cord
(2 Main Power Cords for Asia Only)
For greater detail, consult your Owner’s Manual.
Telephone Line Cord
(2 Telephone Line Cords for Australia
and New Zealand Only)
Owner’s Manual
Alternatively, if you cannot solve a problem:
Refer to Frequently Asked Questions (FAQ’s) on Brother Solutions Web Site:
Adapter
(For Australia Only)
Document Tray
with Extension
Quick Setup Guide
For Australia/New Zealand
Keep the packing materials for possible future transport. If you do not pack the machine
properly, it may void your warranty.
You must select the country where you use the machine after installing the
power code.
If you have Optional Paper Tray,
connect it (otherwise go to Step 4)
Install Drum Unit
2
3
A. Carefully pick up the
machine and place it on
top of the Optional
Paper Tray (Lower
Tray).
B. Plug the modular cable from the Lower
Tray into the modular socket on the
machine.
A. Unpack the drum unit assembly,
and gently rock it from side to side
five or six times to distribute the
toner evenly
C. Open the front cover of the
machine.
inside the
cartridge.
D. Insert the drum unit assembly into
the machine.
To prevent damage to the drum,
do not expose it to light for longer
than a few minutes.
C. The optional paper cassette must be used in place of the upper paper cassette. See instructions
supplied with the Optional Paper Tray.
B. Remove the
To select which tray will be used for faxes or for copies, see Lower Tray (With Optional Paper
Tray Only).
protective part.
If you move the machine after connecting the Lower Tray, be sure to carefully lift the Lower
Tray with the machine because they are not fastened together.
E. Close the front cover.
Attach Document
Tray/Support
Load Paper
Install Mains Power
4
5
6
Cord and Telephone
Line Cord
A. Pull the paper cassette
completely out of the machine.
B. Adjust the paper guides at the
right and rear of the paper
cassette for the paper size you
want.
Document
Support
C. Load paper in the paper
cassette. Press down on
the paper to flatten it in all
four corners, keeping the
paper level below the
guide marks.
Maximum
Paper
Document Tray
with Extension
Height
Guide
D. Slide the paper cassette into the
Mains Power Cord
Telephone Line Cord
Marks
machine until it locks into place.
Set Your Country
Telephone Answering
Device (TAD),
External/Extension
Telephone
7
8
(For Australia/New Zealand Customer Only)
You must set your country so that the machine works correctly.
A. Check that the power is turned on (by plugging
in the power cord).
C. Press
or
to select the country (AUSTRALIA or
NEWZEALAND).
The LCD shows:
(Be careful you set your country.)
D. Press Set when the LCD shows your country.
SET COUNTRY
PRESS SET KEY
E. The LCD prompts you to make sure of the country
again.
B. Press Set.
TAD
TAD
The LCD shows:
AUSTRALIA
1.YES 2.NO
AUSTRALIA
SELECT
& SET
& SET
F. Press
to go to Step G –OR– Press
to go back
NEWZEALAND
SELECT
to Step A to select the country again.
Extension
Telephone
External
Telephone
G. After the LCD shows ACCEPTED for two seconds.
ACCEPTED
(Example for Australia)
– 1 –
LE8235001
Download from Www.Somanuals.com. All Manuals Search And Download.
|