Before you can use the machine, you must set up the hardware and install the software.
Please read this “Quick Setup Guide” for the correct setup procedure and installation
instructions.
Step 1
Step 2
Setup is Complete!
Keep this “Quick Setup Guide”, User’s Guide and supplied CD-ROM in a convenient place for
quick and easy reference at all times.
Version A
Download from Www.Somanuals.com. All Manuals Search And Download.
■Getting Started
Carton Components
1
2
Quick Setup Guide
CD-ROMs
8
7
3
4
®
For Windows
6
®
For Macintosh
5
AC Power Cord
1. Automatic Document Feeder (ADF) 5. Paper Tray
2. Control Panel
6. Power Switch
3. Face-down Output Tray
Support Flap (Support Flap)
4. Front Cover
7. Document Cover
8. ADF Document Output Support Flap
Drum Unit Assembly
(including Toner
Cartridge)
Carton components may differ from one country to another.
Save all packing materials and the carton.
Austraria & New Zealand users:
Hong Kong, Malaysia & Singapore users:
The mains plug supplied with this machine is a grounded three pin plug. Make sure that the AC socket will
accept this grounded three pin plug. This machine must be grounded, If in doubt, call a qualified electrician.
Philipine & Thailand users:
The mains plug supplied with this machine is a side grounded two pin plug. Make sure that
the AC socket will accept this side grounded two pin plug. This machine must be grounded,
If in doubt, call a qualified electrician.
■ To ensure safe operation the supplied plug must be inserted only into a standard power outlet that is
properly grounded through the standard electrical wiring. None grounded equipment may cause an
electrical shock hazard, and may cause excessive electrical noise radiation.
■ The interface cable is not a standard accessory. Please purchase the appropriate interface cable for
the interface you intend to use (Parallel, USB or Network).
■ Do NOT connect the interface cable at this time. Connecting the interface cable is done during the
software installation process.
■ USB interface cable
Please make sure you use a USB 2.0 interface cable that is no longer than 2.0 meters.
When you use a USB cable, make sure you connect it to the USB port of your computer and not to a
USB port on a keyboard or non-powered USB hub.
■ Parallel interface cable
Please make sure you use a Parallel interface cable that is no longer than 2.0 meters.
Use a shielded interface cable that is IEEE 1284-compliant.
■ Network cable (DCP-8065DN only)
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100Base-TX Fast
Ethernet Network.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel
DCP-8060
1
2
3
4
5
9
8
7
6
5
DCP-8065DN
1
2
3
4
9
8
7
6
1
4
7
Status LED
2
LCD (Liquid Crystal Display)
Stop/Exit key
3
6
9
Menu keys
Start key
Dial Pad
5
8
Copy keys
Scan key
Print keys
For the details of the control panel, see “Control panel overview” in Chapter 1 of the User’s Guide.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
2. Load Paper in the Paper Tray ..........................................................................5
3. Release the Scanner Lock ................................................................................6
4. Connect the Power Cord ..................................................................................6
5. Setting the LCD Contrast .................................................................................7
Supplied CD-ROM “MFL-Pro Suite” ................................................................................8
For USB Interface Cable Users
For Windows NT Workstation Version 4.0 Users ......................................................15
For Network Interface Cable Users (DCP-8065DN only)
For USB Interface Cable Users ......................................................................................20
■ For Mac OS 9.1 to 9.2 ......................................................................................20
■ For Mac OS X 10.2.4 or greater .......................................................................22
■ For Mac OS 9.1 to 9.2 ......................................................................................25
■ For Mac OS X 10.2.4 or greater .......................................................................27
Options ............................................................................................................................33
Replacement Consumables ...........................................................................................33
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the machine
Step 1
1 Install the Drum Unit and Toner Cartridge Assembly
2 Unpack the drum unit and toner cartridge
Do not connect the interface cable.
Connecting the interface cable is
done during the software
assembly.
installation process.
3 Gently rock it from side to side several times
to distribute the toner evenly inside the
cartridge.
1 Open the front cover by pressing the front
cover release button (1).
4 Put the drum unit and toner cartridge into
(1)
the machine so that it clicks into place.
5 Close the front cover of the machine.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Load Paper in the Paper Tray
1 Pull the paper tray completely out of the
4 Put paper in the paper tray.
machine.
Check that the paper is flat in the tray and
below the maximum paper mark (1).
(1)
2 While pressing the blue paper guide release
lever (1), slide the adjusters to fit the paper
size. Check that the guides are firmly in the
slots.
5 Put the paper tray firmly back into the
machine and unfold the support flap (1)
before you use the machine.
(1)
(1)
For details on supported paper
specifications, see “Acceptable paper and
other media” in Chapter 2 of the User’s
Guide.
3 Fan the stack of paper well to avoid paper
jams and misfeeds.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the machine
Step 1
Release the Scanner
Lock
4 Connect the Power Cord
3
Do not connect the Parallel or USB
cable yet.
1 Push the lever (1) in the direction shown to
unlock the scanner.
(The gray scanner lock lever is located at
the back left side, under the document
cover (2).)
1 Make sure that the power switch is off.
Connect the AC power cord to the machine.
(2)
(1)
2 Plug the AC power cord into an AC outlet.
Turn the power switch on.
If Scanner Lockedappears on the LCD,
immediately release the scanner lock and
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Setting the LCD Contrast
You can change the contrast to help the LCD look
lighter or darker.
1 Press Menu.
2 Press 1.
3 Press 6.
4 Press
—OR—
to increase the contrast.
to decrease the contrast.
Press
Press OK.
Go to the next page to
install the drivers & software
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Step 2
Supplied CD-ROM “MFL-Pro Suite”
The CD-ROM includes the following items:
Start Here OS 9.1-9.2
Install MFL-Pro Suite
You can install the MFL-Pro Suite and multifunction
drivers.
You can install the printer driver, scanner driver and
Presto!® PageManager® for Mac OS® 9.1 - 9.2.
Start Here OSX
Install Optional Applications
You can install additional MFL-Pro Suite software
utilities.
You can install the MFL-Pro Suite that includes the
printer driver, scanner driver and the Brother
ControlCenter2 for Mac OS® 10.2.4 or greater. You
can also install Presto!® PageManager® to add OCR
capability to the Brother ControlCenter2 and easily
scan, share and organize photos and documents.
Documentation
View the User’s Guide and other documents in PDF
format (Viewer included). The User’s Guide on the
CD-ROM includes the Software and Network User’s
Guide for features available when connected to a
computer (e.g. printing, scanning and networking
details).
Readme.html
You can get important information and
troubleshooting tips.
.
Documentation
On-Line Registration
View the User’s Guide and other document in PDF
format (Viewer included). The User’s Guide on the
CD-ROM includes the Software and Network User’s
Guide for features available when connected to a
computer (e.g. printing, scanning and networking
details).
You will be pointed to the Brother Product
Registration Web page for quick registration of your
machine.
Brother Solutions Center
Brother contact information and web site links offering
the latest news and support information.
Brother Solutions Center
You can access the Brother Solutions Center, a Web
site offering information about your Brother product
including FAQs, User’s Guides, Driver updates and
Tips for using your machine.
Repair MFL-Pro Suite
(For USB and Parallel cable users only)
If you experience errors while installing the MFL-Pro
Suite, you can use this function to automatically repair
and re-install the software.
On-Line Registration
You will be pointed to the Brother Product
Registration Web Page for quick registration of your
machine.
MFL-Pro Suite includes Printer Driver,
Scanner Driver, Brother ControlCenter2,
ScanSoft® PaperPort® SE with OCR and
True Type® fonts.
PaperPort® SE is a document management
application for viewing scanned documents.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Follow the instructions on this page for your operating system and interface cable.
For the latest drivers and to find the best solution for your problem or question, access the Brother Solutions
Center directly from the driver or go to http://solutions.brother.com
Step 2
USB Interface Cable Users ..........................................Go to page 10
Parallel Interface Cable Users.....................................Go to page 12
®
Windows NT Workstation Version 4.0 Users...........Go to page 15
Network Interface Cable Users....................................Go to page 17
USB Interface Cable Users
®
Network Interface Cable Users (DCP-8065DN only)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Step 2
For USB Interface Cable Users
(For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition)
Make sure that you have finished the instructions from Step 1 “Setting Up
®
5 After reading and accepting the ScanSoft
Please close any applications running before
installing the MFL-Pro Suite.
®
PaperPort SE License Agreement, click
Yes.
1 Switch off the machine and disconnect the
machine from the power socket (and from
your computer, if you have already
connected an interface cable).
®
The installation of PaperPort SE will
automatically start and is followed by the
installation of MFL-Pro Suite.
6 When the Brother MFL-Pro Suite Software
License Agreement window appears, click
Yes if you agree to the Software License
Agreement.
2 Turn on your computer.
®
(For Windows 2000 Professional/XP/
XP Professional x64 Edition, you must be
logged on with Administrator rights.)
®
3 Put the supplied CD-ROM for Windows
into your CD-ROM drive. If the model name
screen appears, choose your machine. If
the language screen appears, choose your
language.
7 Choose Standard (DCP-8060) or Local
Connection (DCP-8065DN), and then click
Next. The installation continues.
4 The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
(DCP-8060)
(DCP-8065DN)
If you want to install the PS driver (BR-Script 3
printer driver), choose Custom Install and
then follow the on-screen instructions. When
the Select Components screen appears,
check PS Printer Driver, and then continue
following the on-screen instructions.
If this window does not appear, use Windows®
Explorer to run the setup.exe program from
the root folder of the Brother CD-ROM.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
8 When this screen appears, connect the
USB interface cable to your PC, and then
connect it to the machine.
It will take a few seconds for the installation
screens to appear.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
(For Windows® XP)
DO NOT try to cancel any of the
screens during this installation.
0 When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.
(For Windows® 98/98SE/Me/2000)
A Click Finish to restart your computer.
(After restarting the computer, for
®
Windows 2000 Professional/XP/
XP Professional x64 Edition, you must be
logged on with Administrator rights.)
DO NOT connect the machine to a
USB port on a keyboard or a non-
powered USB hub. Brother
recommends that you connect the
machine directly to your computer.
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation
results window will be shown. If the
Installation Diagnostics shows a failure,
please follow the on-screen instruction or read
on-line help and FAQs in
9 Plug in the power cord and turn on the
machine.
Start/All Programs (Programs)/Brother/
MFL-Pro Suite DCP-XXXX (where XXXX is
your model name).
The MFL-Pro Suite (including printer
driver and scanner driver) has been
installed and the installation is now
complete.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Step 2
For Parallel Interface Cable Users
(For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition)
Make sure that you have finished the instructions from Step 1 “Setting Up
®
5 After reading and accepting the ScanSoft
Please close any applications running before
installing the MFL-Pro Suite.
®
PaperPort SE License Agreement, click
Yes.
1 Switch off the machine and disconnect the
machine from the power socket (and from
your computer, if you have already
connected an interface cable).
®
The installation of PaperPort SE will
automatically start and is followed by the
installation of MFL-Pro Suite.
6 When the Brother MFL-Pro Suite Software
License Agreement window appears, click
Yes if you agree to the Software License
Agreement.
2 Turn on your computer.
®
(For Windows 2000 Professional/XP/
XP Professional x64 Edition, you must be
logged on with Administrator rights.)
®
3 Put the supplied CD-ROM for Windows
into your CD-ROM drive. If the model name
screen appears, choose your machine. If
the language screen appears, choose your
language.
7 Choose Standard (DCP-8060) or Local
Connection (DCP-8065DN), and then click
Next. The installation continues.
4 The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
(DCP-8060)
(DCP-8065DN)
If you want to install the PS driver (BR-Script 3
printer driver), choose Custom Install and
then follow the on-screen instructions. When
the Select Components screen appears,
check PS Printer Driver, and then continue
following the on-screen instructions.
If this window does not appear, use Windows®
Explorer to run the setup.exe program from
the root folder of the Brother CD-ROM.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
®
8 When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the machine.
0 For Windows 98/98SE/Me/
2000 Professional users, click Next.
(For Windows® XP)
®
Windows XP users should wait for a while;
installation of the Brother drivers will start
automatically. The installation screens
appear one after another.
(For Windows® 98/98SE/Me/2000)
DO NOT try to cancel any of the
screens during this installation.
A When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine. Brother
recommends that you connect the
machine directly to your computer.
B When the following screen appears, click
Finish and wait as the PC restarts
®
Windows and continues the installation.
9 Plug in the power cord and turn on the
machine.
Continued...
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Step 2
For Parallel Interface Cable Users
(For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition)
C After the computer restarts, the installation
of the Brother drivers will automatically start.
Follow the instructions on the screen.
®
(For Windows 2000 Professional/XP/
XP Professional x64 Edition, you must be
logged on with Administrator rights.)
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation
results window will be shown. If the
Installation Diagnostics shows a failure,
please follow the on-screen instruction or read
on-line help and FAQs in
Start/All Programs (Programs)/Brother/
MFL-Pro Suite DCP-XXXX (where XXXX is
your model name).
The MFL-Pro Suite (including printer
driver and scanner driver) has been
installed and the installation is now
complete.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
®
For Windows NT Workstation Version 4.0 Users
Make sure that you have finished the instructions from Step 1 “Setting Up
®
5 Put the supplied CD-ROM for Windows
Please close any applications running before
into your CD-ROM drive. If the model name
installing the MFL-Pro Suite.
screen appears, choose your machine. If
the language screen appears, select your
language.
1 Switch off the machine and disconnect the
machine from the power socket.
2 Turn on your computer.
You must be logged on with Administrator
rights.
6 The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine.
3 Connect the parallel interface cable to your
computer, and then connect it to the
machine.
If this window does not appear, use Windows®
Explorer to run the setup.exe program from
the root folder of the Brother CD-ROM.
®
7 After reading and accepting the ScanSoft
®
PaperPort SE License Agreement, click
Yes.
Brother recommends that you connect the
machine directly to your computer.
4 Plug in the power cord and turn on the
machine.
®
The installation of PaperPort SE will
automatically start and is followed by the
installation of MFL-Pro Suite.
Continued...
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Step 2
®
For Windows NT Workstation Version 4.0 Users
8 When the Brother MFL-Pro Suite Software
License Agreement window appears, click
Yes if you agree to the Software License
Agreement.
A Click Finish and wait as the PC restarts
®
Windows and continues the installation.
(You must be logged on with Administrator
rights.)
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation
results window will be shown. If the
9 Choose Standard (DCP-8060) or Local
Connection (DCP-8065DN), and then click
Next. The installation continues.
Installation Diagnostics shows a failure,
please follow the on-screen instruction or read
on-line help and FAQs in Start/Programs/
Brother/MFL-Pro Suite DCP-XXXX (where
XXXX is your model name).
The MFL-Pro Suite (including printer
driver and scanner driver) has been
installed and the installation is now
complete.
(DCP-8060)
(DCP-8065DN)
If you want to install the PS driver (BR-Script 3
printer driver), choose Custom Install and
then follow the on-screen instructions. When
the Select Components screen appears,
check PS Printer Driver, and then continue
following the on-screen instructions.
0 When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
For Network Interface Cable Users (DCP-8065DN only)
®
(For Windows 98/98SE/Me/NT/2000 Professional/XP/XP Professional x64 Edition)
Make sure that you have finished the instructions from Step 1 “Setting Up
1 Switch off and disconnect the machine from
6 The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
the power socket.
2 Connect the network cable to the machine,
and then connect it to a free port on your
hub.
If this window does not appear, use Windows®
Explorer to run the setup.exe program from
the root folder of the Brother CD-ROM.
®
3 Plug in the power cord and turn on the
7 After reading and accepting the ScanSoft
®
machine.
PaperPort SE License Agreement, click
Yes.
®
The installation of PaperPort SE will
automatically start and is followed by the
installation of MFL-Pro Suite.
4 Turn on your computer.
®
(For Windows 2000 Professional/XP/
XP Professional x64 Edition/
®
Windows NT 4.0, you must be logged on
8 When the Brother MFL-Pro Suite Software
License Agreement window appears, read
the agreement, then click Yes if you agree
to its terms.
with Administrator rights.) Close any
applications running before installing the
MFL-Pro Suite.
Before installation, if you are using Personal
Firewall software, disable it. Once you are
sure that you can print after the installation,
re-start your Personal Firewall software.
®
5 Put the supplied CD-ROM for Windows
into your CD-ROM drive. If the model name
screen appears, choose your machine. If
the language screen appears, select your
language.
Continued...
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Step 2
For Network Interface Cable Users (DCP-8065DN only)
®
(For Windows 98/98SE/Me/NT/2000 Professional/XP/XP Professional x64 Edition)
9 Choose Network Connection and then
click Next.
B If the machine is not yet configured for use
on your network, the following screen
appears.
Click OK. The Configure IP Address
window will appear. Enter the IP address
information appropriate to your network by
following the on-screen instructions.
If you want to install the PS driver (Brother’s
BR-Script Driver), choose Custom Install and
then follow the on-screen instructions. When
the Select Components screen appears,
check PS Printer Driver, and then continue
following the on-screen instructions.
C When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.
0 The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
DO NOT try to cancel any of the
screens during this installation.
D Click Finish to restart your computer.
®
(For Windows 2000 Professional/XP/
A If the machine is configured for your
network, select your machine from the list
and then click Next.
XP Professional x64 Edition/
®
Windows NT 4.0, you must be logged on
with Administrator rights.)
This window will not appear if there is only one
of this Brother model connected on the
network, it will be selected automatically.
The MFL-Pro Suite (including network
printer driver and network scanner
driver) has been installed and the
installation is now complete.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
4) In Internal Port number for this
service: - Enter “54925” (without the
inverted commas).
5) Make sure UDP is selected.
6) Click OK.
■ After restarting the computer, the
Installation Diagnostics will run
automatically. If the installation is
unsuccessful, the installation results
window will be shown. If the Installation
Diagnostics shows a failure, please follow
the on-screen instruction or read on-line
help and FAQs in Start/All Programs
(Programs)/Brother/MFL-Pro Suite
DCP-XXXX (where XXXX is your model
name).
1
2
5
3
4
■ Once you are sure that you can print after
the installation, restart your Firewall
software.
■ Firewall settings on your PC may reject the
necessary network connection for Network
Scanning.
5 If you still have trouble with your network
connection, click the Add button.
6 To add port 137 for network scanning,
enter the information below:
1) In Description of service: - Enter any
description, for example “Brother Port”
(without the inverted commas).
2) In Name or IP address (for example
192.168.0.12) of the computer
hosting this service on your
network: - Enter “Localhost” (without
the inverted commas).
3) In External Port Number for this
service: - Enter “137” (without the
inverted commas).
4) In Internal Port number for this
service: - Enter “137” (without the
inverted commas).
Follow the instructions below to configure
your Windows Firewall. If you are using a
personal Firewall software, see the User's
Guide for your software or contact the
software manufacturer.
■ Windows® XP SP2 users:
1 Click the Start button, Control Panel
and then Windows Firewall.
Make sure that Windows Firewall on the
General tab is set to On.
2 Click the Advanced tab and Settings...
button.
5) Make sure UDP is selected.
6) Click OK.
7 Make sure that the new settings are
added and are checked, and then click
OK.
■ For network installations, the Repair
MFL-Pro Suite selection from the main
menu is not supported.
■ Network Scanning, Network Remote Setup,
Network PC-FAX Receiving are not
supported in Windows NT® 4.0.
■ For configuration of advanced network
functions such as LDAP and Scan to FTP,
see the Software and Network Users
Guides located on the CD-ROM.
3 Click the Add button.
4 To add port 54925 for network scanning,
enter the information below:
1) In Description of service: - Enter any
description, for example “Brother
Scanner” (without the inverted
commas).
2) In Name or IP address (for example
192.168.0.12) of the computer
hosting this service on your
network: - Enter “Localhost” (without
the inverted commas).
3) In External Port Number for this
service: - Enter “54925” (without the
inverted commas).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Step 2
For USB Interface Cable Users
®
For Mac OS 9.1 to 9.2
Make sure that you have finished the instructions from Step 1 “Setting Up
1 Switch off the machine and disconnect the
6 Follow the on-screen instructions, and
®
machine from the power socket (and from
restart your Macintosh .
®
the Macintosh , if you have already
7 Connect the USB interface cable to your
connected an interface cable).
®
Macintosh , and then connect it to the
machine.
®
2 Turn on your Macintosh .
DO NOT connect the machine to a
USB port on a keyboard or a non-
powered USB hub.
®
3 Insert the supplied CD-ROM for Macintosh
into your CD-ROM drive.
8 Plug in the power cord and turn on the
4 Double-click the Start Here OS 9.1-9.2 icon
to install the printer and scanner drivers. If
the language screen appears, choose your
language.
machine.
®
9 From the Apple menu, click Chooser.
5 Click MFL-Pro Suite to install.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
0 Click the Brother Laser icon.
On the right side of the Chooser, choose
the machine to which you want to print.
Close the Chooser.
The MFL-Pro Suite, printer driver and
scanner driver have been installed.
ControlCenter2 is not supported in
Mac OS® 9.1 to 9.2.
®
®
A To install Presto! PageManager , click the
Presto! PageManager icon and follow the
on-screen instructions.
You can easily scan, share and organize
photos and documents using Presto!®
PageManager®.
®
®
Presto! PageManager has been
installed and the installation is now
complete.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Step 2
For USB Interface Cable Users
®
For Mac OS X 10.2.4 or greater
Make sure that you have finished the instructions from Step 1 “Setting Up
5 Click MFL-Pro Suite to install.
For Mac OS® X 10.2.0 to 10.2.3 users,
upgrade to Mac OS® X 10.2.4 or greater.
(For the latest information for Mac OS® X,
1 Switch off the machine and disconnect the
machine from the power socket (and from
®
the Macintosh , if you have already
connected an interface cable).
6 Follow the on-screen instructions, and
®
restart your Macintosh .
7 After the DeviceSelector window appears,
connect the USB interface cable to your
®
Macintosh and then to the machine.
®
2 Turn on your Macintosh .
®
3 Insert the supplied CD-ROM for Macintosh
into your CD-ROM drive.
The DeviceSelector window will not appear if
you have also connected a USB interface
cable to the machine before restarting your
Macintosh® or if you are overwriting a
previously installed version of the Brother
software. If you encounter this problem
continue with the installation but skip step 9.
You should choose your Brother machine
from the Model pull-down list in the main
screen of ControlCenter2. (For details, see the
Software User’s Guide on the CD-ROM).
4 Double-click the Start Here OSX icon to
install the drivers and MFL-Pro Suite. If the
language screen appears, choose your
language.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
A Double-Click the Utilities folder.
DO NOT connect the machine to a
USB port on a keyboard or a non-
powered USB hub.
B Double-Click the Print Setup Utility icon.
8 Plug in the power cord and turn on the
machine.
For Mac OS® 10.2.x users, double-click the
Print Center icon.
C Click Add.
9 Choose USB and then click OK.
®
For Mac OS X 10.2.4 to 10.3.x users
➝ Go to D
®
For Mac OS X 10.4 users ➝ Go to E
0 Click Go, then choose Application.
Continued...
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Step 2
For USB Interface Cable Users
®
®
D Choose USB.
G To install Presto! PageManager , click the
Presto! PageManager icon and follow the
on-screen instructions.
E Choose your model name, and then click
Add.
When Presto!® PageManager® is installed
OCR capability is added to the Brother
ControlCenter2. You can easily scan, share,
and organize photos and documents using
Presto!® PageManager®.
®
For Mac OS X 10.2.4 to 10.3 users:
®
®
Presto! PageManager has been
installed and the installation is now
complete.
®
For Mac OS X 10.4 or greater users:
F Click Printer Setup Utility, then choose
Quit Printer Setup Utility.
The MFL-Pro Suite, printer driver,
scanner driver and Brother
ControlCenter2 have been installed.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
For Network Interface Cable Users (DCP-8065DN only)
®
For Mac OS 9.1 to 9.2
Make sure that you have finished the instructions from Step 1 “Setting Up
1 Switch off the machine and disconnect the
6 Follow the on-screen instructions, and
®
machine from the power socket (and from
restart your Macintosh .
®
the Macintosh , if you have already
7 Connect the network interface cable to the
machine, and then connect it to a free port
on your hub.
connected an interface cable).
®
2 Turn on your Macintosh .
8 Plug in the power cord and turn on the
®
3 Insert the supplied CD-ROM for Macintosh
machine.
into your CD-ROM drive.
4 Double-click the Start Here OS 9.1-9.2 icon
to install the printer driver. If the language
screen appears, choose your language.
®
9 From the Apple menu, click Chooser.
5 Click MFL-Pro Suite to install.
Continued...
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Step 2
For Network Interface Cable Users (DCP-8065DN only)
0 Click the Brother Laser (IP) icon, and then
choose BRN_XXXXXX.
Close the Chooser.
XXXXXX are the last six digits of the Ethernet
address.
The MFL-Pro Suite and printer driver
have been installed.
ControlCenter2andNetwork Scanningare not
supported in Mac OS® 9.1 to 9.2.
®
®
A To install Presto! PageManager , click the
Presto! PageManager icon and follow the
on-screen instructions.
You can easily scan, share and organize
photos and documents using Presto!®
PageManager®.
®
®
Presto! PageManager has been
installed and the installation is now
complete.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
For Network Interface Cable Users (DCP-8065DN only)
®
For Mac OS X 10.2.4 or greater
Make sure that you have finished the instructions from Step 1 “Setting Up
1 Switch off the machine and disconnect the
7 After the DeviceSelector window appears,
connect the network interface cable to the
machine, and then connect it to a free port
on your hub.
machine from the power socket and from
®
the Macintosh .
®
The DeviceSelector window will not appear if
you have also connected a USB interface
cable to the machine before restarting your
Macintosh® or if you are overwriting a
previously installed version of the Brother
software. If you encounter this problem
continue with the installation skipping steps 9
to 11. You should then select your Brother
machine from the Model pull-down list in the
main screen of ControlCenter2. (For details,
see the software User’s Guide on the
CD-ROM.)
2 Turn on your Macintosh .
®
3 Insert the supplied CD-ROM for Macintosh
into your CD-ROM drive.
4 Double-click the Start Here OSX icon to
install the printer and scanner drivers. If the
language screen appears, choose your
language.
5 Click MFL-Pro Suite to install.
8 Plug in the power cord and turn on the
machine.
6 Follow the on-screen instructions, and
®
restart your Macintosh .
Continued...
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers & Software
Step 2
For Network Interface Cable Users (DCP-8065DN only)
9 Choose Network and then click OK.
B Choose your model name, and then click
OK. Click OK again to close the
DeviceSelector.
0 If you want to use the Scan key on the
machine, you must check Register your
computer with the "Scan To" functions
at the machine box and enter a name you
C Click Go, then choose Application.
®
want to use for your Macintosh in Display
Name. The name you enter will appear on
the machine’s LCD when you press the
Scan key and choose a scan option. You
can enter any name up to 15 characters
long.
(For more information on network scanning,
see Chapter 10 of the Software User’s
Guide on the CD-ROM.)
D Double-click the Utilities folder.
A Click Browse.
E Double-click the Print Setup Utility icon.
For Mac OS® 10.2.x users, double-click the
Print Center icon.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
F Click Add.
I Click Printer Setup Utility, then choose
Quit Printer Setup Utility.
®
For Mac OS X 10.2.4 to 10.3.x users
➝ Go to G
The MFL-Pro Suite, printer driver,
scanner driver and ControlCenter2
have been installed.
®
For Mac OS X 10.4 users ➝ Go to H
G Make the selection shown below.
For configuration of advanced network
functions such as LDAP and Scan to FTP,
see the Network User’s Guide located on the
CD-ROM.
®
®
J To install Presto! PageManager , click the
Presto! PageManager icon and follow the
on-screen instructions.
H Choose your model name, and then click
Add.
®
For Mac OS X 10.2.4 to 10.3 users:
When Presto!® PageManager® is installed
OCR capability is added to the Brother
ControlCenter2. You can also easily scan,
share, and organize photos and documents
using Presto!® PageManager®.
®
®
Presto! PageManager has been
installed and the installation is now
complete.
®
For Mac OS X 10.4 or greater users:
29
Download from Www.Somanuals.com. All Manuals Search And Download.
■
For Network Users and Administrators (DCP-8065DN only)
BRAdmin Professional configuration utility
®
(For Windows users)
®
The BRAdmin Professional utility for Windows is designed to manage your Brother network
connected devices such as network-ready Multifunction devices and or network-ready printers
in a Local Area Network (LAN) environment.
For more information on BRAdmin Professional and BRAdmin Light, go to
Installing the BRAdmin Professional configuration utility
1 Put the supplied CD-ROM into your CD-ROM drive.
The opening screen will appear automatically.
Follow the on-screen instructions.
2 Click the Install Optional Applications icon on the main menu screen.
3 Click BRAdmin Professional and follow the on-screen instructions.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting your IP Address, Subnet Mask and Gateway using BRAdmin
Professional
1 Start BRAdmin Professional, and select
TCP/IP.
3 Double-click the new device.
The default password for the print server is
‘access’. You can use BRAdmin
Professional or a web browser to change this
password.
2 Click Devices, then choose Search Active
Devices.
BRAdmin will search for new devices
automatically.
4 Enter the IP Address, Subnet Mask and
Gateway, and then click the OK button.
5 The address information will be saved to the
machine.
For more information on network
administration, please see the Network
User’s Guide in the programs menu or go to
31
Download from Www.Somanuals.com. All Manuals Search And Download.
BRAdmin Light configuration utility
(For Mac OS® X users)
The Brother BRAdmin Light software is a Java™ application that is designed for the Apple Mac
®
OS X environment. It supports some of the features of the Windows BRAdmin Professional
software. For example, using the BRAdmin Light software, you can change some network
settings on Brother’s network ready printers and multifunction devices.
The BRAdmin Light software will be installed automatically when you install the MFL-Pro Suite.
Please refer to Installing the driver and software in this Quick Setup Guide if you have not yet
installed the MFL-Pro Suite.
Setting your IP address, Subnet Mask and Gateway using BRAdmin Light
3 Double-click the BRAdmin Light.jar file.
■ If you have a DHCP/BOOTP/RARP server
Run the BRAdmin Light software. BRAdmin
Light searches new devices automatically.
in your network, you don’t have to do the
following operation. The print server will
automatically obtain its own IP address.
Make sure that version 1.4.1_07 or later of
Java™ client software is installed on your
computer.
■ The default password for the print server is
‘access’. You can use BRAdmin Light to
change this password.
1 Double-click the Macintosh HD icon on
your desktop.
4 Double-click the new device.
2 Choose Library, Printers, Brother and
then Utilities.
5 Enter the IP Address, Subnet Mask and
Gateway, and then click OK.
6 The address information will be saved to the
printer.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
■Options and Consumables
Options
The machine has the following optional accessories. You can expand the capabilities of the
machine by adding these items.
Lower Tray Unit
LT-5300
Memory
Second lower paper tray unit expands total input capacity up
to 500 sheets.
You can expand the memory by installing a (144-pin DIMM)
memory module. For more details, see “Memory Board” in
Chapter B of the User’s Guide.
Replacement Consumables
When the time comes to replace consumables, an error message will be indicated on the LCD.
For more information about the consumables for your machine, visit
http://solutions.brother.com or contact your local Brother re-seller.
Drum Unit
DR-3115
Toner Cartridge
TN-3145 / TN-3185
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International Corporation.
© 2006 Brother Industries, Ltd. All rights reserved.
Windows, Microsoft and Windows NT are registered trademarks of Microsoft in the U.S. and other countries.
Macintosh is a registered trademark of Apple Computer, Inc.
Postscript and Postscript Level 3 are registered trademarks or trademarks of Adobe Systems Incorporated.
PaperPort is a registered trademark of ScanSoft, Inc.
Presto! PageManager is a registered trademark of NewSoft Technology Corporation.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its
proprietary programs.
All other brand and product names mentioned in this manual are registered trademarks of their respective
companies.
Compilation and Publication
Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest
product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and
shall not be responsible for any damages (including consequential) caused by reliance on the materials presented,
including but not limited to typographical and other errors relating to the publication.
This product is designed for use in a Professional Environment.
©2006 Brother Industries, Ltd. ©1998-2006 TROY Group, Inc.
©1983-2006 PACIFIC SOFTWORKS INC.
This product includes the “KASAGO TCP/IP” software developed by Elmic Systems, Inc. ALL RIGHTS
RESERVED.
Download from Www.Somanuals.com. All Manuals Search And Download.
ARL/ASA/NZ
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Belkin Network Router 8820AU00376 User Manual
Billy Goat Chipper TKD502SP User Manual
Bosch Appliances Music Mixer PLE 1MA030 EU User Manual
Briggs Stratton Air Cleaner 12V800 User Manual
Brother Printer DCP 375CW User Manual
Cabletron Systems Network Card 9E106 06 User Manual
Casio Printer KL P1000 User Manual
CDA Cooktop HCG500 User Manual
Century Computer Hardware A780FULLHD User Manual
Chauvet Projector DMX5F User Manual