Breville Coffeemaker BES230 User Manual

Breville is a registered trademark of Breville Pty. Ltd.  
ABN 98 000 092 928  
Breville Customer Service Centre  
Australian Customers  
Café Modena  
Espresso/Cappuccino Machine  
Breville Customer Service Centre  
PO Box 22  
Instructions  
BES230  
Botany NSW 2019  
AUSTRALIA  
Customer Service: 1300 139 798  
Fax (02) 9384 9601  
Email Customer Service: [email protected]  
New Zealand Customers  
Breville Customer Service Centre  
Private Bag 94411  
Greenmount  
Auckland, New Zealand  
Customer Service: 0800 273 845  
Fax 0800 288 513  
Email Customer Service: [email protected]  
© Copyright. Breville Pty. Ltd. 2008  
Due to continual improvements in design or otherwise,  
the product you purchase may differ slightly from the one  
illustrated in this booklet.  
Model: BES230 Issue 1/08  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BES230_CAFE MODENA_FA.indd 1-1  
10/6/08 3:04:10 PM  
Breville recommends safety first continued  
Breville recommends safety first  
We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you,  
our valued customer foremost in mind. In addition we ask that you exercise a degree of care when using any  
electrical appliance and adhere to the following precautions:  
ImportANt SAfeguArdS for your BrevIlle CAfé modeNA  
eSpreSSo/CAppuCCINo mACHINe  
ImportANt SAfeguArdS for All eleCtrICAl ApplIANCeS  
Carefully read all instructions before operating and  
save for future reference.  
Always ensure the selector control has been turned  
to the ‘STANDBy’ position, the Power ‘ON/OFF’  
switch has been pressed to the ‘OFF’ position and  
the Breville Café Modena Espresso/Cappuccino  
Machine is switched off at the power outlet and  
unplugged when not in use, before cleaning, before  
attempting to move the appliance, disassembling,  
assembling and when storing the appliance.  
Unwind the power cord before use.  
Any maintenance, other than cleaning, should be  
performed at an authorised Breville Service Centre.  
To protect against electric shock, do not immerse  
power cord, power plug or appliance in water or  
any other liquid.  
Remove and safely discard any packaging material  
and promotional labels before using the Breville  
Café Modena Espresso/Cappuccino Machine for the  
first time.  
This appliance is for household use only. Do not use  
this appliance for anything other than its intended  
use. Do not use moving vehicles or boats. Do not  
use outdoors. Misuse may cause injury.  
Do not let the power cord hang over the edge of  
a bench or table, touch hot surfaces or become  
knotted.  
To eliminate a choking hazard for young children,  
remove and safely discard the protective cover  
that is fitted to the power plug of the Breville Café  
Modena Espresso/Cappuccino Machine.  
The installation of a residual current device (safety  
switch) is recommended to provide additional  
safety protection when using electrical appliances.  
It is advisable that a safety switch with a rated  
residual operating current not exceeding 30mA  
be installed in the electrical circuit supplying the  
appliance. See your electrician for professional  
advice.  
This appliance is not intended for use by persons  
(including children) with reduced physical, sensory  
or mental capabilities, or lack of experience  
and knowledge, unless they have been given  
supervision or instruction concerning use of the  
appliance by a person responsible for their safety.  
Do not attempt to operate the Breville Café Modena  
Espresso/Cappuccino Machine by any method  
other than those described in this booklet.  
Do not place the Breville Café Modena Espresso/  
Cappuccino Machine near the edge of a bench or  
table during operation. Ensure the surface is level,  
clean and free of water and other substances.  
Use only cold tap water in the water tank. Do not  
use any other liquid.  
Never use the Breville Café Modena Espresso/  
Cappuccino Machine without water in the water  
tank.  
Children should be supervised to ensure that they  
do not play with the appliance.  
Do not place the Breville Café Modena Espresso/  
Cappuccino Machine on or near a hot gas or  
electric burner, or where it could touch a heated  
oven.  
It is recommended to regularly inspect the  
appliance. Do not use the appliance if power  
supply cord, power plug or appliance becomes  
damaged in any way. Return the entire appliance  
to the nearest authorised Breville service centre for  
examination and/or repair.  
Ensure the filter holder is firmly inserted and  
secured into the brewing head before using the  
machine.  
Always ensure the Breville Café Modena Espresso/  
Cappuccino Machine is properly assembled before  
connecting to power outlet and operating. Follow  
the instructions provided in this booklet.  
Never remove the filter holder during the brewing  
operation as the machine is under pressure.  
Do not touch hot surfaces. Allow the Breville Café  
Modena Espresso/Cappuccino Machine to cool  
down before moving or cleaning any parts.  
The appliance is not intended to be operated by  
means of an external timer or separate remote  
control system.  
Do not move the Breville Café Modena Espresso/  
Cappuccino Machine whilst in operation.  
Do not use the Breville Café Modena Espresso/  
Cappuccino Machine on a sink drain board.  
Do not leave the Breville Café Modena Espresso/  
Cappuccino Machine unattended when in use.  
Do not use attachments other than those  
provided with the Breville Café Modena Espresso/  
Cappuccino Machine.  
Keep the appliance and accessories clean. Follow  
the cleaning instructions provided in this book  
(page 12).  
Do not place anything, other than cups for  
warming, on top of the Breville Café Modena  
Espresso/Cappuccino Machine.  
DO NOT IMMERSE ANY PART OF YOUR BREVILLE CAFé MODENA ESPRESSO/  
CAPPUCCINO MACHINE IN WATER OR ANY OTHER LIQUID.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
BES230_CAFE MODENA_FA.indd 4-5  
10/6/08 3:04:11 PM  
operating your Breville Café modena  
espresso/Cappuccino machine  
Know your Breville Café modena  
espresso/Cappuccino machine  
Power ‘ON/OFF’ switch  
Cup warming plate  
Before first use  
The water tank should be filled with fresh  
cold water before use.  
Remove and safely discard any packaging material  
or promotional labels before using your Breville  
Café Modena Espresso/Cappuccino Machine for the  
first time.  
Removable 1.2 litre water tank  
‘POWER’ light (red)  
Check water level before use and replace  
the water daily.  
illuminates when the  
machine is turned on  
Do not used mineral or distilled water.  
It is recommended to wash the frothing jug,  
measuring spoon, filter holder and the stainless  
steel filters in mild detergent and water. Rinse and  
dry thoroughly.  
15 bar Italian designed & made pump system  
Note  
pre-heating the machine  
Wipe the outer housing with a soft, damp cloth and  
dry thoroughly. Do not immerse the outer housing,  
power cord or power plug in water or any other  
liquid.  
For optimal crema, it is recommended to carry out a  
complete brewing operation with water but without  
any ground coffee in the filter holder before making  
your first coffee to ensure that the machine has  
been pre-heated.  
‘HEATING’ light (orange)  
Thermoblock heating system  
illuminates to indicate that  
the machine is heating and  
will turn off when the correct  
temperature has been reached.  
This light will cycle on and off  
during operation to indicate the  
machine is monitoring the correct  
temperature  
Selector control  
for Espresso and Steam  
Do not clean any of the parts or accessories  
in the dishwasher.  
Ensure the Selector Control is in the ‘STANDBy’  
position.  
Brew head  
Note  
Insert the power plug into a 230/240V outlet and  
switch on. Press the Power ‘ON/OFF’ switch to  
‘ON’.  
Filter holder  
External water window  
filling the water tank  
When the orange ‘HEATING’ light goes off, turn the  
2 stainless steel filters  
Ensure that the Power ‘ON/OFF’ switch is in the  
‘OFF’ position and the Selector Control is in the  
‘STANDBy’ position.  
Swivel steam wand  
with froth enhancer  
Selector Control to the  
’ESPRESSO’ position  
(1 cup filter and 2 cup filter)  
and allow a small amount of water to run through  
the brew head for a few seconds without the filter  
holder in place.  
Switch the machine off at the power outlet and  
unplug the power cord.  
Steam baffle  
Crema is the finely-aerated, golden,  
aromatic layer, extracted from the ground  
coffee during brewing, that settles on top of  
the brewed coffee.  
Open the water tank lid and remove the water tank.  
Fill the water tank with cold water to the maximum  
mark and replace back into the machine, pressing  
down firmly so that the water valve opens. Close  
the water tank lid.  
Note  
pre-warming cups  
For optimal coffee temperature, pre-warm cups by  
placing them on the cup warming plate.  
Removable drip tray  
and grid  
Combined measuring spoon  
and coffee press  
Water level indicator  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
BES230_CAFE MODENA_FA.indd 6-7  
10/6/08 3:04:12 PM  
operating your Breville Café modena  
operating your Breville Café modena  
continued  
continued  
espresso/Cappuccino machine  
espresso/Cappuccino machine  
Clean any excess ground coffee from the rim of the  
filter holder to ensure a proper fit under the brew  
head.  
preparing the coffee  
Brewing the coffee  
The Breville Café Modena Espresso/  
Cappuccino Machine remains ready for  
brewing and maintains a constant heating  
temperature whilst the Power ‘ON/OFF’  
switch remains in the ‘ON’ position. If  
the temperature decreases, the orange  
‘HEATING’ light will illuminate and the  
heater will automatically heat to maintain  
the correct brewing temperature.  
Place the 1 or 2 cup filter into the filter holder and  
fill with ground coffee (use the smaller filter for 1  
cup and the larger filter for 2 cups).  
Ensure the Selector Control is in the ‘STANDBy’  
position.  
Place the filter retainer clip in the release position,  
by pulling the clip back towards your hand.  
Insert the power plug into a 230/240V power outlet  
and switch on.  
Use 1 level measure of ground coffee for the  
1 cup filter and 2 level measures for the 2 cup  
filter. It is important to use the correct amount of  
ground coffee as the filter perforations have been  
constructed for optimal pressure build up in  
the machine.  
Press the Power ‘ON/OFF’ switch to ‘ON’. The red  
‘POWER’ light and the orange ‘HEATING’ light will  
illuminate. The orange ‘HEATING’ light goes off  
when the machine is heated.  
Note  
Ensure the drip tray is in place.  
Position one or two pre-heated cups beneath the  
filter holder.  
How to froth milk for a cappuccino or  
latte  
Place the filer holder underneath the brew head so  
that the handle is positioned to the left of centre.  
Lift the filter holder until it contacts the brew head  
and rotate to the right.  
Turn the Selector Control to the  
position.  
‘ESPRESSO’  
The Breville Café Modena Espresso/Cappuccino  
Machine comes complete with a steam wand for  
easier steaming and frothing of milk. The first step in  
making a cappuccino/latte is to make a short espresso  
(see ‘Brewing the coffee’). Then:  
After a few seconds, aromatic coffee will begin  
to run through the filter holder.  
When sufficient coffee has flowed into the cups,  
turn the Selector Control to the ‘STANDBy’ position.  
This will stop the flow of coffee.  
Fill the stainless steel frothing jug 1⁄  
full with  
3
cold milk.  
If the ‘STEAM’ function is not required, press the  
Power ‘ON/OFF’ switch to ‘OFF’, switch off at the  
power outlet, unplug the power cord and allow the  
machine to cool.  
When the orange ‘HEATING’ light goes off, insert  
the steam wand, with the froth enhancer attached,  
into jug of milk so that the head of the froth  
enhancer is just immersed into the milk.  
Distribute the ground coffee evenly in the filter  
and tamp (press) lightly with the bottom of the  
measuring spoon (if there is too much ground  
coffee or too firmly tamped, the flow of water can  
be blocked).  
Remove the filter holder from the brew head and  
using the filter retainer clip to secure the filter in  
the filter holder, turn the filter holder upside down  
to empty the used coffee into a bin. Used coffee  
grounds should be thrown away with domestic  
waste and not down the sink which may block  
drains. Rinse the filter and filter holder with water  
and allow to dry.  
THE METAL PARTS OF THE FILTER HOLDER MAY STILL BE VERY HOT. COOL THESE  
PARTS UNDER COLD WATER. ENSURE THE FILTER RETAINER CLIP IS USED TO SECURE  
FILTER WHEN DISCARDING THE COFFEE GROUNDS.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
BES230_CAFE MODENA_FA.indd 8-9  
10/6/08 3:04:14 PM  
operating your Breville Café modena  
Coffee making tips  
continued  
espresso/Cappuccino machine  
tips on making the perfect espresso  
the grind  
Turn the selector control to the  
position.  
‘STEAM’  
Always ensure that the froth enhancer has  
been firmly inserted onto the steam wand.  
For best results use fresh cold milk (lite  
milk will froth easier).  
Always clean the steam wand and froth  
enhancer after each use (refer to Care and  
cleaning on Page 12).  
Use the steam wand without the froth  
enhancer if steamed milk without the froth  
is required.  
Don’t just rely on your coffee machine to do all the  
work. Making a good cup of coffee is an art.  
If using pre-ground coffee, purchase an espresso  
grind suitable for espresso/cappuccino machines.  
Gently move the frothing jug in a circular motion  
around the froth enhancer to steam the milk.  
If grinding coffee, select a fine grind setting  
suitable for espresso coffee.  
Water flow  
When the milk begins to increase in volume,  
immerse the froth enhancer deeper into the milk to  
further froth the milk, if required.  
If you’re making an espresso, make sure the water  
flows through the coffee filter at the correct rate. If  
it’s too slow, the coffee will be over-extracted – too  
dark and bitter, with a mottled and uneven crema on  
top. If it flows too quickly, the coffee will be under-  
extracted – the proper flavour will not have had  
time to develop. Adjust the water flow by tamping  
(pressing down) the ground coffee firmly or by  
changing the grind of the coffee.  
If the grind is too fine, the water will not flow  
through the coffee even under pressure (this grind  
looks like powder and feels like flour when rubbed  
between fingers).  
To avoid over-heating or burning the milk, place  
your hand on the bottom of the stainless frothing  
jug. When the jug becomes almost too hot to touch,  
turn the selector control to the ‘STANDBy’ position  
to stop the steaming function before removing the  
jug.  
If brewing more coffee immediately  
after using the ‘STEAM’ function, turn  
If the grind is too coarse, the water flows  
through the coffee too fast, preventing a full  
flavoured extraction.  
the Selector Control to the  
‘ESPRESSO’  
position and allow a small amount of water  
to run through the brew head for a few  
seconds without the filter holder in place.  
This will prepare the machine for optimal  
brewing temperature.  
When steaming milk a pumping should will  
be heard. This is the pump operating and is  
normal.  
As the Selector Control is turned to the  
‘STANDBY’ position, steam will be released  
from the machine. This is normal operation.  
the coffee  
Pre-ground coffee will only retain its flavour for  
1 week, provided it is stored in an air tight  
container, in a cool, dark area.  
Note  
Whole coffee beans are recommended and should  
be ground just before use.  
Note  
Coffee beans stored in an airtight container will  
keep up to 1 month before they begin to lose their  
flavour.  
Carefully pour the steamed milk into each cup  
of freshly brewed espresso coffee and spoon the  
frothed milk on top in the following ratios:  
1
Do not store coffee or beans in a refrigerator or  
freezer.  
Cappuccino – ⁄  
3
espresso, 1⁄  
frothed milk  
espresso topped with steamed  
3
steamed milk,  
1
3
1
Latte –  
3
milk and about 10cm of frothed  
milk (traditionally served in a glass)  
WHEN FROTHING, MILK SHOULD NOT BE ALLOWED TO RUN OVER THE TOP OF THE  
FROTH ENHANCER, OTHERWISE IT WILL NOT FUNCTION PROPERLY.  
TO AVOID SPLATTERING OF HOT MILK, DO NOT MOVE THE STEAM WAND OR FROTH  
ENHANCER ABOVE THE SURFACE OF THE MILK WHILE STEAMING OR FROTHING.  
WHEN STEAMING OR FROTHING MILK, ENSURE THE SELECTOR CONTROL IS IN THE  
‘STANDBY’ POSITION BEFORE REMOVING THE FROTHING JUG.  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BES230_CAFE MODENA_FA.indd 10-11  
10/6/08 3:04:15 PM  
continued  
Care and cleaning  
Care and cleaning  
Before cleaning, ensure the Selector Control is in the  
‘STANDBy’ position and press the Power ‘ON/OFF’  
switch to ‘OFF’. Switch off at the power outlet, then  
unplug the power cord and allow the coffee machine  
to cool completely before cleaning.  
Cleaning the drip tray  
decalcifying the machine  
The drip tray should be removed, emptied and  
cleaned at regular intervals, particularly when the  
water level indicator shows that the drip tray is full.  
Ensure the Selector Control is in the ‘STANDBy’  
position and the Power ‘ON/OFF’ switch is pressed  
to ‘OFF’. Switch off at the power outlet and unplug  
the power cord.  
Remove the grid, steam baffle and water level  
indicator from the drip tray, wash all 4 parts with  
water and non-abrasive washing liquid before  
rinsing and drying.  
Remove the filter holder and pour the prepared  
decalcifying solution into the water tank.  
Cleaning the steam wand & froth  
enhancer  
Insert the power cord at the outlet and switch on.  
Press the Power ‘ON/OFF’ switch to the ‘ON’.  
The steam wand and froth enhancer should always  
be cleaned after steaming or frothing milk.  
Do not place any parts of the Espresso/  
Cappuccino machine in the dishwasher.  
Remove the froth enhancer and rinse under warm  
tap water.  
Place a suitably large container under both the  
brew head and the steam wand.  
Cleaning the filters, filter holder  
Note  
When the brewing temperature is reached the  
orange ‘HEATING’ light will go off.  
and brew head  
Immediately after use, remove the filter holder and  
discard the used ground coffee. Rinse the stainless  
steel filters and filter holder under hot running  
water. Should the fine holes in the filters become  
blocked, then a clean, plastic dishwashing  
brush should be used (do not use a brush with  
metal bristles).  
decalcifying  
Turn the Selector Control to the  
position and allow half the decalcifying solution to  
run through the brew head.  
‘ESPRESSO’  
After regular use, hard water can cause limestone  
build up in, and on, many of the inner functioning  
components, reducing the brewing flow, power  
of the machine, and affecting the quality of coffee.  
Turn the Selector Control to the  
‘STEAM’  
position and allow the remaining solution run  
through the steam wand. Then turn the Selector  
Control to the ‘STANDBy’ position.  
We advise decalcifying the machine on a regular  
basis (every 2-3 months) using a mixture of white  
vinegar and water. Use the following as a guide:  
The brew head area should be wiped with a damp  
cloth to remove any remaining used ground coffee.  
After decalcifying, re-fill the water tank with fresh  
cold water and rinse the machine by following the  
instructions for decalcifying and running half the  
water through the brew head and half through the  
steam wand.  
diluted solution (for softer water)  
1 part white vinegar  
It is advisable to periodically run water through  
the coffee machine with an empty filter and filter  
holder in place to remove any used ground coffee.  
Wipe the steam wand with a damp cloth.  
Place a clean jug or cup under the steam wand  
then turn the Selector Control briefly to the  
‘STEAM’ position to clear any remaining milk  
from the steam wand.  
2 parts cold tap water  
Cleaning the housing/cup warming tray  
The machine is now ready for use.  
Concentrated solution (for harder water)  
1 part white vinegar  
The outer housing can be wiped with a soft, damp  
cloth (do not use abrasive agents or cloths which  
can scratch the surfaces), then polished and dried  
with a soft, dry cloth.  
If the fine opening of the steam wand becomes  
blocked, allow the machine to cool and use a  
needle or fine sharp implement to unblock the  
opening.  
The stainless steel filters should not come  
in contact with any decalcifying agents.  
1 part cold tap water  
Do not use commercial powder or liquid  
decalcifying agents.  
Note  
THE WATER TANK SHOULD NEVER BE REMOVED OR COMPLETELY EMPTIED DURING  
DECALCIFYING.  
DO NOT IMMERSE ANY PART OF YOUR BREVILLE CAFé MODENA ESPRESSO/  
CAPPUCCINO MACHINE IN WATER OR ANY OTHER LIQUID.  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BES230_CAFE MODENA_FA.indd 12-13  
10/6/08 3:04:17 PM  
trouble shooting chart  
Coffees to try  
espresso  
proBlem  
poSSIBle CAuSeS  
Intense and aromatic, an espresso, or short  
black as it’s also known, uses about 7g of  
ground coffee. It is served in a small cup or  
glass to a level of approximately 35mm.  
Coffee does not run through Machine is not turned on or plugged in  
Water tank is empty  
Selector Control not in  
‘ESPRESSO’ position  
Coffee grind is too fine  
Cappuccino  
Too much coffee in the filter and/or too firmly tamped (pressed)  
The filter is blocked (see Care and cleaning)  
A cappuccino is very light and almost luke  
warm. It has one-third espresso, one-third milk  
and one-third foam. It is traditionally consumed  
before noon.  
Coffee runs out too quickly  
Coffee runs too slowly  
Coffee grind is too coarse  
Not enough coffee in the filter and/or too firmly tamped (pressed)  
The water tank is empty or low  
Coffee grind is too fine  
Machine is blocked by scale build up (see Care and cleaning)  
Café latte  
Served in a glass, a café latte consists of one-  
third espresso, topped with steamed milk and  
about 10mm of foam.  
Brewed coffee runs out  
around the edge of the  
filter holder  
Filter holder is not inserted in the brew head correctly  
There are coffee grounds around the filter rim  
Too much coffee in the filter  
Coffee has been too firmly tamped (pressed)  
macchiato  
the machine is too loud  
Water tank is empty  
Traditionally served short, the macchiato is also  
poured as a long black with a dash of milk or a  
dollop of foam.  
Water tank is not securely in place  
Coffee is too weak or watery Coffee grind is not fine enough  
(use coffee grind suitable for espresso machines)  
Coffee is too cold  
Machine not pre-heated  
long black  
Cups not pre-heated  
Milk not heated enough (if making a cappuccino or latte)  
A long black is generally served as a double  
shot of espresso.  
No crema  
Coffee is not tamped (pressed) firmly enough  
Coffee grind is too coarse  
Coffee is not fresh  
No steam is generated  
Machine is not turned on  
Water tank is empty  
ristretto  
Meaning restricted, a ristretto is an  
extremely short espresso of approximately  
15mm, distinguished by its intense flavour  
and aftertaste.  
Selector Control not in  
Swivel steam wand is blocked (see Care and cleaning)  
‘STEAM’ position  
milk is not foamy  
after frothing  
Not enough steam  
Milk is not fresh and cold  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BES230_CAFE MODENA_FA.indd 14-15  
10/6/08 3:04:18 PM  

Beko Washer WM85135LW User Manual
Belkin Switch P75209 User Manual
Bissell Vacuum Cleaner 3601 User Manual
Black Box Cable Box QCE12U User Manual
Black Box Network Card Rackmount Remote Power Managers User Manual
Black Decker Saw TC1100 User Manual
Canon Printer C3500 User Manual
Carrier Heat Pump 25HCB3 User Manual
Cecilware Griddle EL 1624T User Manual
Celestron Binoculars C5 S User Manual