BA-650-OW and BA-650-OB
Resonate Outdoor Speakers
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 3
Corner Mounting
The wall brackets have an angle designed for mounting the speakers across a
90° inside corner. This is very useful within an enclosed patio area or angling
the speakers into a room, fig. 3.
Optional Omni Mount (not included)
The top of each speaker cabinet has a pair of inset screws designed for use
with the Omni Mount 20.5 ball mount. This is useful for mounting the speakers
vertically rather than horizontally. The mount consists of two pieces. One that
screws to the speaker enclosure and one that is mounted on the wall. The wall
mount has a two-piece mechanism that tightens around a ball on the end of
the speaker mount. This allows the speaker to be placed at the appropriate
angle and tightened holding its placement, fig. 4.
Making the Connection
Positive and negative spring loaded connection terminals are located on the
back of each speaker. Note that the stereo speakers have two pairs of
terminals to accept both left and right signals. The terminals are color coded
red for the positive signal and black for the negative signal, fig 5. For this
purpose, many pairs of speaker wires utilize red and black shielding for easily
identifying the positive and negative leads. Other speaker wires use a copper
wire for positive and white tinted copper wire for negative.
Fig. 4
Once the installation is complete, your speakers should be fully operational.
Should you have no audio from the speakers, make sure the speaker wires did
not become disconnected from the terminal posts, or that there is not a short in
the speaker wire.
Fig. 5
Resonate
Model: BA-650-OW
6-1/2" 2-Way 8 ohms
Indoor/Outdoor Speaker
Serial: AP14506-321
BreatheAudio Technologies LLC Hebron, Kentucky USA
Made in China
- Signal
+ Signal
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Breatheaudio Outdoor Speaker
SYSTEM
BA-650-OB
BA-650-OW
BA-650-OSB
BA-650-OSW
Resonate 6.5" Black Outdoor
Loudspeaker
50W
8 ohm
88dB 1W/1M
Resonate 6.5" White Outdoor
Loudspeaker
50W
8 ohm
88dB 1W/1M
Resonate 6.5" Black Stereo Outdoor
Loudspeaker
40W x 2
8 ohm x 2
88dB 1W/1M
Resonate 6.5" White Stereo Outdoor
Loudspeaker
40W x 2
8 ohm x 2
88dB 1W/1M
Description
Power Rating:
Impedance
Efficiency
Frequency Response
Tweeter Crossover
Woofer Crossover
Cabinet material
Grill material
60Hz-20KHz +/-3dB
12dB
N/A
Mineral Filled Polyethylene
Powder Coated Aluminum
Powder Coated Steel
13''x7 5/8''x7 1/2''
330mmx193mmx190mm
8'' (205mm)
60Hz-20KHz +/-3dB
12dB
N/A
Mineral Filled Polyethylene
Powder Coated Aluminum
Powder Coated Steel
13''x7 5/8''x7 1/2''
330mmx193mmx190mm
8'' (205mm)
60Hz-20KHz +/-3dB
12dB
N/A
Mineral Filled Polyethylene
Powder Coated Aluminum
Powder Coated Steel
13''x7 5/8''x7 1/2''
330mmx193mmx190mm
8'' (205mm)
60Hz-20KHz +/-3dB
12dB
N/A
Mineral Filled Polyethylene
Powder Coated Aluminum
Powder Coated Steel
13''x7 5/8''x7 1/2''
330mmx193mmx190mm
8'' (205mm)
Bracket material
Dimension:(H*W*D)
Depth w/bracket
Weight (Unit)
WOOFER
7.50lbs(3.40kg)
7.50lbs(3.40kg)
7.50lbs(3.40kg)
7.50lbs(3.40kg)
Ferrite, 13oz (370g)
Flat Back Plate
Ferrite, 13oz (370g)
Flat Back Plate
Ferrite, 13oz (370g)
Flat Back Plate
Ferrite, 13oz (370g)
Flat Back Plate
Magnet Structure
Voice Coil
Cone
1" (25mm) Polyimide Film
6.5" (165mm) Polypropylene
Butyl Rubber
1" (25mm) Polyimide Film
6.5" (165mm) Polypropylene
Butyl Rubber
1" (25mm) Polyimide Film
6.5" (165mm) Polypropylene
Butyl Rubber
1" (25mm) Polyimide Film
6.5" (165mm) Polypropylene
Butyl Rubber
Surround
Dust Cover
TWEETER
Magnet
Dome
Polypropylene
Polypropylene
Polypropylene
Polypropylene
Neodymium
Neodymium
Neodymium
PEI (Polyetherimide), 3/4" (19mm)
Neodymium
PEI (Polyetherimide), 3/4" (19mm)
PEI (Polyetherimide), 3/4" (19mm) PEI (Polyetherimide), 3/4" (19mm)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|