QUAD BLADE
FOOD PROCESSOR
OWNER’S MANUAL
Model EP114H
120V., 60Hz., 800 Watts
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING & MAINTENANCE
Congratulations! As the owner of a new Bravetti Food Processor, you are about to
use a very versatile and powerful kitchen appliance that will quickly become an
indispensable item in your kitchen. Bravetti products are engineered to meet the
highest quality standards and are designed to offer the ultimate in ease of operation
and convenience.
Re-settable Thermal Safety
Using the Storage Compartment
Device
Your Bravetti QUAD BLADE Food
Processor comes with a storage
compartment. (Fig. 20)
Your Food Processor has been
designed with a unique safety system
which prevents damage to the unit’s
motor and drive system, should you
inadvertently overload your appliance.
The safety system will automatically cut
the electric power to the appliance
when the device senses an overload or
excessive temperature in the motor or
drive system. Should this occur during
use and the appliance stops
IMPORTANT INFORMATION
Please read all the following instructions carefully.
IMPORTANT
For your protection, the Bravetti Food Processor has a been fitted with a safety
interlock switch. The unit cannot run unless the food processor lid is locked in place.
Never attempt to defeat the food processor lid interlock.
functioning, follow the re-setting
procedure below:
Fig.20
1. Lift the lid of the storage compartment.
2. Place attachments inside as shown
above.
1. Turn the “ON/OFF” speed control
to the “OFF” position
2. Unplug the unit from the wall
receptacle.
3. Remove and empty the processor
bowl. Ensure that no food is
jamming the cutting blades or
attachments.
Spatula Storage
Slide the spatula into the slot provided
on the side of the processor body.
(Fig. 21)
4. Allow the appliance to cool down
for a minimum of 30 minutes.
5. Re-install the processor bowl and
re-plug appliance in the wall outlet.
6. Proceed to use the appliance as
before. Should the appliance still
fail to operate, turn the “ON/OFF”
speed control to the “OFF” position
and unplug from the wall outlet.
Allow the appliance to cool down
for an additional 1 to 2 hours. After
this time has passed, repeat the
restart procedure, steps 5 and 6
above.
Fig. 21
Cord Storage
The power supply cord can be
stored by feeding it into the opening
at the back of the food processor
body. (Fig. 22)
Fig. 22
9
2
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING TO KNOW YOUR FOOD PROCESSOR
OPERATING INSTRUCTIONS
Processing Examples
THIN SLICING
THICK SLICING
FINE SHREDDING
COARSE SHREDDING
For thin slicing:
-
-
-
Recommended speed level is High
(Cucumbers, raw potatoes, lettuce, carrots)
Recommended speed level is High
(Cabbage, carrots, onions)
Recommended speed level is High
(Carrots, cucumbers, cabbage)
For coarse slicing:
For fine shredding:
For coarse shredding: - Recommended speed level is High
(Lettuce, carrots, apples)
CLEANING & MAINTENANCE
CAUTION:Make sure that the unit is unplugged from power source and speed
control dial is in the “OFF” position before inserting or removing any
attachments and before cleaning.
•
•
•
•
Never immerse the unit, cord or plug
in water or any other liquid.
Hints & Tips:
•
The double chopping blade can be
used for chopping meat, fish,
Clean the main unit with a damp
cloth only.
Only the stainless steel blades can
be washed in the dishwasher.
All other parts can be cleaned in
warm sudsy water using regular
dishwashing liquid.
If food has spilled over on to the main
unit, use the pointy end of the spatula
to clean the cracks and crevices of the
base under the food processor bowl.
(Fig. 19)
vegetables, cheese, etc. setting the
speed to maximum.
1. Main Unit
11. Spatula
12. French Fry Disc Assembly
13. Blade Holder
14. Fine Slicing Blade
15. Coarse Shredding Blade
16. Thick Slicing Blade
17. Fine Shredding Blade
18. Whipper
19. Citrus Juicer Filter
20. Juice Reamer
•
For finer chopping, increase the
length of time you process.
2. On/Off Speed Control Dial
3. Pulse/Turbo Button
4. Storage Compartment
5. Processor Bowl
6. Double Chopping Blade
7. Processor Cover
8. Food Pusher
•
For coarser chopping, use the pulse
button for a few seconds and monitor
food texture.
•
•
•
Pre-cut larger pieces to make them fit
into the feed tube. When chopping
hard foods (e.g. meat, cheese) cut
into 1 “/2.4 cm cubes.
For shredding, place food horizontally
into the feed tube, for slicing place the
food vertically.
9. Spindle
10. Dough Blade
Technical Specifications
Fig. 19
IMPORTANT: Remove
protective chopping blade
cover(s) before use.
Protective blade covers to
only be used for storage.
Voltage:
Power:
120V., 60Hz.
800 Watts
Capacity:
6 Cups (1.5 Liters)
Illustrations may differ from actual product
3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Citrus Juice Filter (cont.)
4. Insert the juice
4. Now you are ready to use any of the
Speed Control Dial
attachments that come with the unit;
i.e. the double chopping blade, dough
blade, etc.
The food processor speed control dial
has two speeds settings plus "Pulse" and
"Turbo".
reamer into the
center of the citrus
juice filter with its
shaft inside the
central column of
the bowl. (Fig. 13)
1 - Low
2 - High
Using The Double Chopping Blade
Always disconnect unit from power
source before cleaning or changing
accessories.
WARNING: USE EXTREME
CAUTION WHEN HANDLING THE
BLADES. THEY ARE EXTREMELY
SHARP. Always remove protective
bade cover(s) before using.
Fig. 14
Fig. 15
The speed can be adjusted while the
food processor is in use.
Fig. 13
5. Plug in the appliance.
6. Place fruit on juice
reamer and hold with
a cupped hand.
Use of the Pulse/Turbo button allows
greater control over the texture of the
food being processed. Use "Pulse" when
the unit is in the "Off" position. Use
"Turbo" when the unit is in the "On"
position and you need a burst of power.
Please note that the "Pulse" and "Turbo"
is only intended to be used for short
"bursts" of processing.
7. Operate at minimum speed.
WARNING: Always operate the
juicer at minimum speed only.
Do not operate the citrus juicer at
higher speeds.
Fig. 16
The double chopping
blade may be
used with one
French Fry Blade Assembly
Slicing & Shredding Blades
blade or with
two blades.
CAUTION: Make sure that the unit
is unplugged from the power
source and the speed control dial is in
the “OFF” position before inserting or
removing attachments.
Note: The French Fry Blade is already
assembled to the blade holder. Do not
try to remove it. (Fig. 17)
1. Fit the processor bowl and spindle
as detailed previously.
2. Using the finger holes in the French
Fry blade holder, fit it over the
spindle and press firmly into place as
indicated. (Fig. 18)
CAUTION: Make sure that the unit
is unplugged from the power
source and the speed control dial is in
the “OFF” position before inserting or
removing attachments.
1. Place the blade of your choice on
the blade holder. Inserting the longer
tab on the side of the blade first.
(Fig. 14)
2. Press the other end of the blade until
it clicks into place. (Fig. 15)
3. Fit the processor bowl and spindle
as detailed on the page 4.
Fig. 3
Operating the Food Processor
1. To use as
Setting up:
a double
blade, carefully
slip the separate
blade over the
shaft of the
1. CAUTION: Make sure that the unit is
unplugged from the power source and
the the Speed control dial is in the
"Off" position before inserting or
removing any attachments and before
cleaning.
2. Place the food processor bowl onto
the processor body. There is no need
to turn the bowl. (Fig. 1)
3. When fitted correctly, the handle will
be to the right of the assembly, and
the ridge on the base of the bowl will
fit into the slot at the back of the
processor body. (Fig. 2)
Double
Blade
Main Blade
main blade.
(Fig. 3 & Fig. 4)
Fig. 4
WARNING: USE EXTREME
4. Using the finger holes in the blade
holder, fit it over the spindle and
press firmly into place as indicated.
(Fig. 16)
CAUTION WHEN HANDLING
BLADES. BLADES ARE SHARP.
4. Fit the lid and click into place as
indicated in Setting Up section
(page 4).
Two Blades Together
2. Then insert onto the shaft of the
processor bowl. Always hold the
chopping blade by the upper plastic
part. (Fig. 5)
WARNING: USE EXTREME
CAUTION WHEN HANDLING
BLADES. BLADES ARE SHARP.
5. Fit the lid and click into place as
described in the Setting Up section
(page 4).
5. Plug in the processor.
WARNING: USE THE FOOD
PUSHER TO ADD FOOD INTO THE
PROCESSOR BOWL THROUGH
THE FEEDER TUBE.
Do not overload the bowl. In one
operation, you can process a
maximum 6 cups (1500 ml) of food.
Fig. 1
6. Plug in the processor.
WARNING: USE THE FOOD
PUSHER TO ADD FOOD INTO
THE PROCESSOR BOWL
THROUGH THE FEEDER TUBE.
Do not overload the food processor bowl.
In one operation, you can process a
maximum of 6 cups (1500 ml) of food.
Fig. 18
Fig. 5
Fig. 2
Fig. 17
4
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Dough Blade
Whipping Attachment (cont.)
Using The Double Chopping Blade
7. Keep hands and utensils away from
the cutting blade while chopping
food to reduce the risk of severe
injury to persons or damage to the
food processor. A scraper may be
used, but ONLY when the food
processor is NOT running and has
been unplugged. Never feed food by
hand. Always use the food pusher.
(Fig. 8)
(Cont.)
CAUTION: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the “OFF”
position before inserting or removing
attachments.
1. Fit the processor bowl and spindle as
described previously on page 4.
2. Fit the dough blade over the spindle and
press firmly into place. (Fig. 9)
3. Place the ingredients into the bowl.
4. Fit the lid and click into place as
described in the “Setting Up” section
(page 4).
5. Plug in the food processor.
6. Turn the food processor on selecting
high speed. Maximum capacity for
processing dough is based on the
mixture of 21 oz. (600 g.) of flour and
14 oz. (400 g.) of water in order to
obtain 2.2 Lbs. (1 kg.) of dough.
7. Recommended speed for making dough
is high.
8. When it is time to knead the dough,
place speed control dial in the "Off"
position and pulse until the dough is
ready.
9. Remove the blade from the bowl before
removing the dough.
WHEN KNEADING DOUGH, DO NOT
OPERATE THE MACHINE LONGER THAN
20 SECONDS. AFTERWARDS WAIT AT
LEAST 2 MINUTES BEFORE OPERATING
THE MACHINE AGAIN.
FOR SAFETY,
ALWAYS LEAVE
THE PUSHER IN
PLACE WHILE
1. Fit the processor bowl and spindle
as described previously on page 4.
2. Fit the whipping attachment over the
spindle and press firmly into place.
(Fig. 10)
3. Place the ingredients
into the bowl.
3. Place ingredients to be processed in
the bowl.
4. Then holding the processor lid by the
feeding tube, place the processor lid
onto the bowl and turn counter
clockwise to lock the lid in place.
Ensure that the lid tab has "clicked"
into place and that the arrow on the
lid is aligned with the dot on the unit.
Insert food pusher into feed chute.
(Fig. 6 & Fig. 7)
4. Fit the lid and
click into place as
described in the
Fig. 10
“Setting Up” section (page 4).
5. Plug in the food processor.
6. Turn the food processor on
selecting high speed.
7. Recommended speed for whipping
is high.
8. Remove the whipping attachment
from the bowl before removing the
whipped ingredients.
FOR SAFETY, ALWAYS LEAVE THE
PUSHER IN PLACE WHILE
OPERATING THE PROCESSOR.
Fig. 8
Fig. 7
8. When finished processing the
ingredients, remove the processor lid
by turning clockwise.
9. Remove the chopping blade first
before removing the processed food.
FOR SAFETY, ALWAYS USE THE
FOOD PUSHER WHEN PUTTING
FOOD INTO THE THE FEEDER TUBE.
NEVER FEED BY HAND.
10. Do NOT leave the appliance
unsupervised when it is in the "ON"
position.
Fig. 6
Citrus Juice Filter
CAUTION: Make sure that the unit is
unplugged from the power source
and the speed control dial is in the
“OFF” position before inserting or
removing attachments.
WARNING: Always Operate The
Juicer At Lowest Speed Only. Do
Not Operate The Citrus Juicer At
Higher Speeds.
5. Plug the processor into a wall outlet.
6. Turn the speed control dial to the
desired speed setting.
PROCESSING EXAMPLES WITH THE DOUBLE CHOPPING BLADE
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
1. Fit the processor bowl
as detailed previously
(page 4).
2. Fit the citrus juice filter
into the processor
bowl. (Fig. 11)
RECOMMENDED
PRODUCT
Meat*
QUANTITY
OPERATION TIMES
SPEED
High/Turbo
Low
OPERATING THE
PROCESSOR.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
21 oz / 600 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
4 slices
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
20 seconds
Fig. 9
Onions
Fig. 11
3. Rotate counter
Nuts
High
clockwise. Ensure
that the citrus juice
filter tab has clicked
into place. (Fig. 12)
Fish*
Pulse
Cheese
Liquids (soups)
Carrots
Bread
Pulse
Whipping Attachment
CAUTION: Make sure that the
unit is unplugged from the
power source and the speed control
dial is in the “OFF” position before
inserting or removing attachments.
Pulse
pulse
40-50 seconds
40 - 50 seconds
10 - 30 seconds
10 seconds
Fig. 12
Low
Apples
24.5 oz / 700 gr.
Max 4 bunches
Max 4 cups/1 liter
High
Parsley
Mayonnaise
High/Turbo
High
30 seconds
* Always allow food to cool before placing in the bowl.
* Remove all bones before processing.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|