Bose Headphones 3 User Manual

®
®
Bose QuietComfort 3  
Acoustic Noise Cancelling  
Headphones  
®
Owner’s Guide  
Guía de usario  
Notice d’utilisation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
Important Safety Instructions  
1. Read these instructions – for all components before using this product.  
2. Keep these instructions – for future reference.  
3. Heed all warnings – on the product and in the owners guide.  
4. Follow all instructions.  
5. Do not use this product near water or moisture – Do not use this product near a bathtub, washbowl, kitchen  
sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture are present.  
6. Clean only with a dry cloth – and as directed by Bose Corporation. Unplug the battery charger from the wall  
outlet before cleaning.  
7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.  
8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9. Only use attachments/accessories specified by Bose.  
10. Unplug the battery charger during lightning storms or when unused for long periods of time – to prevent  
damage to this product.  
11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in any way: such as power-supply cord or plug is damaged; liquid has been spilled or objects  
have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate  
normally, or has been dropped – Do not attempt to service this product yourself. Opening or removing covers  
may expose you to dangerous voltages or other hazards. Please call Bose to be referred to an authorized service  
center near you.  
Compliance with FCC rules (U.S.A., only)  
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This  
device may not cause harmful interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
NOTICE  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15  
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio communications. However,  
this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off and on, you are  
encouraged to try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
• Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
FCC WARNING  
• Changes or modifications not expressly approved by the party responsible for compliance could void the users  
authority to operate this equipment.  
• Proper connections must be used for connection to a host computer and/or peripherals in order to meet FCC  
emission limits.  
Apple, iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, iPod touch, and MacBook are  
trademarks of Apple, Inc., registered in the U.S. and other countries.  
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has  
been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been  
certified by the developer to meet Apple performance standards. Apple is not responsible for the  
operation of this device or its compliance with safety and regulatory standards.Please note that  
the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome  
Welcome  
Introducing the QuietComfort® 3  
Acoustic Noise Cancelling® headphones  
Thank you for purchasing the QuietComfort® 3 Acoustic Noise Cancelling®  
headphones from Bose. Our innovative technologies enable these on-ear  
headphones to reduce unwanted distractions while providing you with lifelike  
audio performance and a comfortable fit. An additional audio cable with remote  
and microphone for select Apple products allows convenient control of music,  
voice applications and calls.  
Adjustable  
headband  
L (left)  
mark  
Rotating  
earcups  
Replaceable ear  
cushions  
R (right)  
mark  
Power switch with  
power indicator  
Ports  
Accessories included:  
Battery  
Audio cable  
Dual-plug  
adapter  
Carrying case  
Audio cable with remote and mic  
Battery  
charger  
IMPORTANT: Before initial headphone use, it is important to fully charge the  
battery for a minimum of two hours. See “Charging the battery” on page 6.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing Your Headphones  
Preparing Your Headphones  
Charging the battery  
Initial charging time for a new battery is approximately two hours. After that, charging  
time varies depending on the battery charge state.  
1. Insert the battery into the charger.  
2. Swing the plug prongs out of the charger body.  
3. Plug the charger into a live AC (mains) outlet.  
1
2
3
Indicator:  
On = Charging  
Off = Charging complete  
Flashing = See “Troubleshooting”  
on page 12.  
IMPORTANT: DO NOT STORE A BATTERY IN THE CHARGER.  
• After charging, unplug the battery charger and remove the battery.  
• Storing a battery in the charger diminishes the charged state of the bat-  
tery over time and may permanently reduce the capacity of the battery.  
Battery handling and precautions  
• The battery does not have to be completely discharged in order to charge it.  
You can charge the battery at any time.  
• Never leave the battery in a discharged state. Charge after use and before storage.  
• Avoid extreme temperatures when charging the battery. Battery charging should  
occur within the temperature range of 32°F (0°C) to 95°F (35°C).  
• A fully charged battery provides approximately 25 hours of use. Replace the battery  
when it no longer provides adequate power after charging. To order a replacement  
battery, see “Troubleshooting” on page 12.  
• Keep the terminals on the battery, in the charger, and in the right earcup of the  
headphones clean at all times. Dirty terminals may cause poor electrical connec-  
tions and affect performance. For cleaning instructions, see “Cleaning” on page 12.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing Your Headphones  
Installing the battery  
Be sure to fully charge the battery before  
first use. See “Charging the battery” on  
page 6.  
Battery  
Headband  
1. Make sure the headphones power  
switch is off.  
2. Hold the headphones right earcup as  
shown.  
3. Insert the battery into the compartment.  
Be sure to push the battery all the way  
in until it is flush with the earcup.  
Right  
earcup  
Removing the battery for charging  
Perform Step 1 and 2 and lift the battery  
straight up and out of the battery  
compartment.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Headphones  
Using Your Headphones  
Wearing your headphones  
You can use your headphones only for noise reduction or for listening to audio along  
with the benefit of noise reduction.  
As you put on the headphones, observe the L (left) and R (right) markings that identify  
the left and right earcups. Adjust the headband so it rests gently on top of your head  
and the earcup cushions fit comfortably on your ears.  
Using your headphones for audio with noise reduction  
For listening to an audio source, you need to use the supplied headphones cord.  
1. Plug the appropriate end of the head-  
Left  
earcup  
phones cord into the left earcup.  
2. Plug the other end of the cord into the  
audio device (see “Connecting to porta-  
ble and home audio devices” on  
page 10).  
Headphones  
cord  
3. Turn on the audio device, making sure  
the volume is initially set to a low level.  
4. Turn on your headphones. The power  
switch indicator should light.  
5. Set the volume level using the volume  
control on the audio device.  
Power switch  
indicator  
Using your headphones only  
for noise reduction  
When using the headphones just for noise  
reduction, you do not need to connect the  
headphones cord. Just turn on your  
Right earcup  
headphones and put them on your head.  
When the battery needs charging  
• When the power switch indicator starts flashing the battery is in a low-charge state.  
From the moment the indicator starts flashing, the battery has about four hours of  
life left.  
• When replacing a battery, make sure you charge the new battery for a minimum of  
two hours. See “Charging the battery” on page 6.  
• Before storing the battery for an extended period of time, fully charge the battery to  
maximize its life.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Headphones  
Connecting to your Apple device  
You can connect the headphone to the standard 3.5 mm headphone jack on your  
iPhone, iPod, or other compatible Apple device.  
The remote and mic are supported only by iPod nano (4th generation and later),  
iPod classic (120GB, 160GB), iPod touch (2nd generation and later), iPhone 3GS,  
iPhone 4, iPad, iPad 2 and 2009 models or later of MacBook and MacBook Pro.  
The remote is supported by iPod shuffle (3rd generation and later). Audio is supported  
by all iPod models.  
Using the headphones with your Apple device  
The Bose® QuietComfort® 3 headphones come with a small  
in-line remote with an integrated microphone for convenient  
Volume up  
control of select Apple products. Easily control volume,  
track selection and voice applications, plus switch between  
Answer/End  
your calls and music.  
Volume down  
Note: Full controls may not be available for some Apple products.  
Headphone controls  
Basic functions  
Increase volume  
Decrease volume  
Press and release the + button.  
Press and release the button.  
Call-related functions  
Answer a call  
When you receive an incoming call, press and release the  
Answer/End button to answer.  
End a call  
Press and release the Answer/End button.  
Decline an incoming call  
Press and hold the Answer/End button for about 2 seconds,  
then release.  
Switch to an incoming or on-hold While on a call, press and release the Answer/End button  
call and put the current call on  
hold  
once.  
Press and release again to switch back to the first call.  
Switch to an incoming or on-hold While on a call, press and hold the Answer/End button for  
call and end the current call  
Use Voice Control  
about two seconds, then release.  
Press and hold the Answer/End button. See iPhone  
User Guide for compatibility and usage information about  
this feature  
Media playback functions  
Play or pause a song or video  
Press and release the Answer/End button.  
Skip to the next song or chapter Press and release the Answer/End button twice quickly.  
Fast-forward  
Press and release the Answer/End button twice quickly and  
hold the second press.  
Go to the previous song or  
chapter  
Press and release the Answer/End button three times  
quickly.  
Rewind  
Press and release the Answer/End button three times  
quickly and hold the third press.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Headphones  
Connecting to portable and home audio devices  
The 3.5 mm plug on the headphones cord allows you to connect  
your headphones to a variety of audio devices that use a 3.5 mm  
output jack:  
• CD, DVD, or MP3/digital audio player  
• Desktop or laptop personal computer  
Connecting to airline audio systems  
The audio output connections on airline audio systems vary,  
but they typically have dual or single 3.5 mm output jacks.  
Note: Airline audio may not equal the high-quality audio you  
experience from a home stereo or portable source.  
Connecting to dual output jacks  
Plug the headphone cord into the dual-plug  
adapter and insert it into the dual output  
jacks.  
Dual 3.5 mm  
plugs  
Headphones  
cord jack  
Connecting to a single output jack  
Pivot the movable plug so that it snaps in  
place against the adapter body. Plug the  
headphone cord into the adapter and insert  
it into the single output jack.  
Single 3.5  
mm plug  
Headphones  
cord jack  
Movable  
plug  
The dual-plug adapter lowers the volume  
levels of strong audio output signals that  
are common on airline systems.  
If you find that the volume level is too low, remove the adapter and plug the  
headphone cord directly into the 3.5 mm output jack.  
WARNING: Use only the Bose® airline adapter to connect headphone to  
airplane seat jacks. DO NOT use adapters intended for mobile phones as  
this could result in personal injury such as burns or property damage due to  
overheating. Remove and disconnect immediately if you experience warming  
sensation or loss of audio.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Care and Maintenance  
Folding and storing  
QuietComfort® 3 Acoustic Noise Cancelling® headphones feature rotating earcups  
that fold flat for easy, convenient storage.  
Right  
Left  
CAUTION: The earcups rotate only in one direction. Incorrectly rotating the earcups can  
damage the headphones.  
Using the carrying case  
The carrying case provides safe storage for your headphones and its accessories.  
The foam tray holding the battery and charger is removable, allowing you to store  
other items, such as an MP3 player, in the case.  
Note: To maximize battery life, always charge the battery before storing it and never  
store the battery in the charger.  
Battery  
Dual-plug  
adapter  
Charger  
Space for  
headphones  
cord  
Headphones  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Cleaning  
Scheduled cleaning is not required. However, you can simply wipe the outside surface  
of the headphones with a dry cloth, as needed. Also, be sure that the earcup ports are  
clear and that no moisture is allowed into the earcups. Use only a dry cloth to clean  
the electrical contacts on the battery, in the charger, or in the battery compartment of  
the headphones.  
CAUTIONS:  
• Be sure to unplug the battery charger before cleaning it.  
• DO NOT use a moist cloth to clean the electrical contacts on the battery, in the  
charger, or in the battery compartment of the headphones.  
Troubleshooting  
If you experience any trouble using your headphones, try the instructions in the  
following table. If you still need help, call for technical assistance. In the United States  
only, call 1-800-905-2113. For other regions, see the contact information on the inside  
back cover.  
Problem  
What to do  
No noise reduction • Make sure the headphones power switch is on.  
• Charge the battery.  
Low or no volume • Make sure the audio source is on and the volume is turned up.  
• Do not use the dual-plug adapter.  
• Check the headphones cord connection at the source and the  
earcup.  
Crackling noise;  
intermittent loss of  
noise reduction  
• Charge the battery.  
• Clean the contacts on the battery and in the battery  
compartment. See “Cleaning” on page 12.  
• Replace the battery.  
Low rumbling  
sound  
• Adjust earcup fit on your ears.  
• Make sure earcup ports are not blocked.  
Charger indicator • Remove the battery, wait 10 seconds, and insert it again.  
is flashing  
• Unplug the charger, wait 10 seconds, and plug it in again.  
• Make sure the air temperature is within the acceptable range  
for charging, 32°F (0°C) to 95°F (35°C).  
• Replace the battery.  
• Replace the charger.  
Short battery life  
after charging  
• Replace the battery.  
• Replace the charger.  
Microphone is not • Make sure that the headset plug is securely connected to the  
picking up sound  
headphone jack.  
• Make sure the microphone is not being blocked or covered.   
The microphone is located on the back of the Answer/End  
button.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Troubleshooting (cont.)  
Problem  
What to do  
Phone is not  
responding to  
button presses  
• Make sure that the headset plug is securely connected to  
the headphone jack.  
• For multi-press functions: Vary speed of presses.  
Apple product is not • Full controls may not be available for some Apple products.  
responding to remote  
Reattaching earcup cushions  
If an earcup cushion becomes detached from the  
earcup:  
1. Align the two holes on the back of the cushion  
with the two posts on the earcup.  
2. Push the cushion onto the earcup.  
3. Press in around the outside edge of the cushion  
to snap it in place.  
4. Make sure the cushion is flush all the way  
around and that there are no gaps between the  
cushion and the earcup.  
Accessories  
You can purchase accessories from your Bose® dealer on the Internet  
or over the phone. See the inside back cover for contact information.  
• QC® 3 Mobile Communications Kit  
• Battery  
• Battery charger  
• Carrying case  
• Replacement ear cushions  
• Accessory kit (includes adapters and extension cable)  
• 5 ft. (1.5 m) audio extension cable  
Power ratings  
Battery charger: 100VAC - 240VAC, 5.5W  
Battery: 3.7VDC, 200mAh  
Names and Contents of Toxic or Hazardous Substances or Elements  
Toxic or Hazardous Substances and Elements  
Part  
Lead  
(Pb)  
Mercury  
(Hg)  
Hexavalent  
(CR(VI))  
Polybrominated  
Biphenyl (PBB)  
Polybrominated  
Name  
Cadmium (Cd)  
0
diphenylether (PBDE)  
PCBs  
X
0
0
0
0
Metal   
parts  
X
0
0
0
0
0
Plastic   
parts  
0
X
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Speakers  
Cables  
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is  
below the limit requirement in SJ/T 11363-2006.  
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for  
this part is above the limit requirement in SJ/T 11363-2006.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
©2012 Bose Corporation, The Mountain,  
Framingham, MA 01701-9168 USA  
AM324019 Rev.01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

BenQ Projector MP770 User Manual
Black Box Network Hardware BLACK BOX User Manual
Black Decker Blender BLM7600G User Manual
Black Decker Power Hammer 5021 User Manual
Bogen Speaker MPS1B User Manual
Bolens Vacuum Cleaner 24777010 User Manual
Bosch Appliances Stereo Amplifier LBB 1938 20 User Manual
Briggs Stratton Lawn Mower 1695353 User Manual
Bryant Furnace 393AAV User Manual
Carson Car Amplifier 1012 User Manual