Radio / CD
Dakota CD31
Santa Fe CD31
Operating instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING ELEMENTS
1
button for unlatching the re-
movable release panel
2
BAND button for selection of
FM memory levels and the MW
or LW wavebands,
source selection for radio opera-
tion
3
4
TS button, starts the Travelstore
function
SCAN button, starts scan func-
tion
5
6
7
CD slot
X-BASS button, X-Bass function
CD eject button
CD•C button, source selection
between CD, radio, CD-changer
and AUX (AUX not featured on
Dakota CD31)
8
AUDIO button, controls bass,
treble, balance and fader
Arrow keys
9
:
MENU button, which calls up the
basic settings menu
;
<
=
Buttons 1 - 5
button to display clock time
Volume control
volume up
volume down
>
Button for switching the device
on and off
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Notes and accessories ............ 6 CD Changer Operation .......... 14
Road Safety .................................... 6 Starting CD Changer Operation .... 14
Fitting.............................................. 6 Selecting a CD.............................. 14
Accessories .................................... 6 Selecting a Track........................... 14
Quick Track Selection ................... 14
Fast Search (Audible).................... 14
Release Panel .......................... 7
Theft Protection............................... 7
Changing Display Contents ........... 14
Removing the Release Panel ........... 7
Repeat Playing Tracks or Whole
Attaching the Release Panel ............ 7
CDs (REPEAT)............................. 14
Playing Tracks in Random
Switching On and Off............... 8
Sequence (MIX) ............................ 15
Sampling All Tracks on All CDs
(SCAN) ......................................... 15
Pausing During Play ...................... 15
Adjusting the Volume............... 9
Setting Switch-On Volume............... 9
Immediate Volume Reduction (Mute) . 9
Muting During Phone Calls .............. 9
CLOCK - Time ........................ 16
Displaying the Time ....................... 16
Setting the Time ............................ 16
Choosing 12/24 Hour
Clock Mode .................................. 16
Display the Time When the
Radio Operation ..................... 10
Switching on Radio Operation ....... 10
Select Waveband/Memory Level ... 10
Setting the Station ......................... 10
Adjusting Station Search Sensitivity 10
Saving a Station ............................ 10
Saving a Station Automatically
Device is Switched Off But the
Ignition On .................................... 16
Displaying the time briefly when
the device is switched off .............. 16
(Travelstore) .................................. 11
Going to a Preset Station .............. 11
Scanning through Available
Stations (SCAN) ........................... 11
Setting Scan Time ......................... 11
Regional Tuner Settings................. 11
Tone and Volume Controls..... 17
Adjusting the Bass ........................ 17
Adjusting the Treble....................... 17
Adjusting the Balance .................... 17
Adjusting the Fader ....................... 17
X-BASS ........................................ 17
CD Operation ......................... 12
Starting CD Operation .................. 12
Selecting a Track........................... 12
Quick Track Selection ................... 12
Fast Search (Audible).................... 13
Playing Tracks in Random
Sequence (MIX) ............................ 13
Sampling Tracks (SCAN) .............. 13
Repeating Tracks (REPEAT) .......... 13
Pausing During Play ...................... 13
Changing Display Contents ........... 13
Removing CD from Player ............. 13
External Audio Sources ......... 18
Switching AUX input on and off ..... 18
Technical data ........................ 18
Guarantee .............................. 19
Installation instructions.......... 68
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES AND ACCESSORIES
Thank you for choosing a Blaupunkt
product. We hope you will enjoy your
new equipment.
Fitting
If you want to fit your car radio yourself,
read the fitting and connecting notes at
the end of the guide.
Please read these instructions before
using for the first time. Blaupunkt’s edi-
tors are constantly working to write clear,
generally understandable instructions
for use. If you still have questions about
how to use your equipment, please re-
fer to your dealer or to the telephone
hotline in your country.You will find the
telephone numbers on the back of this
booklet.
Accessories
Only use accessories approved by Blau-
punkt.
Remote control
The optional RC 08 and RC 10 remote
control units allow you to control your
car radio’s basic functions safely and
conveniently from the steering wheel.
Road Safety
Amplifiers
Road safety has the first priority.
Only make adjustments to your car
radio when the traffic conditions al-
low. Familiarise yourself with the de-
vice before you start driving.
You must be able to hear audible
alarms from police vehicles, fire en-
gines or ambulances promptly inside
the vehicle.
Any Blaupunkt amplifier can be used
(Not for Dakota CD31).
CD Changer
The following Blaupunkt CD changers
can be connected:
CDC A 06, CDC A 08, CDC A 072 or
IDC A 09.
The use of an adapter cable (Blaupunkt
no.7 607 889 093) also allows the CDC
A 05 or CDC A 071 CD changers to be
connected.
You should therefore listen at an ap-
propriate volume when travelling.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
RELEASE PANEL
G Pull the panel off the device, first
Release Panel
straight forward and then to the left.
Theft Protection
Your device has a removable flip-release
panel to protect it from theft.
The radio is of no value to a thief with-
out this panel.
Protect your device from theft by taking
the release panel with you whenever
you leave the vehicle. Do not leave the
panel in the car, even in a hidden place.
The release panel is designed for easy
handling.
G When the release panel has been
separated from the device, it
switches itself off.
G Any current settings are saved.
G If a CD has been inserted, it re-
mains in the device.
Attaching the Release Panel
G Push the panel into the guides on
the device from left to right.
G Push the left hand side of the panel
Note:
into the device until it engages.
G Do not drop the panel.
G Do not expose the panel to direct
sunshine or any other source of
heat.
G Avoid touching the contacts on the
panel with your skin. If necessary,
clean the contacts using a lint-free
cloth dipped in alcohol.
Note:
Removing the Release Panel
G Do not press the display as you in-
sert the panel.
1
If the device was switched on when the
panel was removed, it will switch itself
back on automatically with the last set-
tings (radio, CD, CD-changer or AUX)
as soon as the panel is replaced (no
AUX on Dakota CD31).
G Press the
button 1.
The panel unlatches.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING ON AND OFF
Switching On and Off
The device can be switched on and off
in the following ways:
Switching on by means of CD
insertion
If there is no CD in the device when it is
switched off:
Switching On and Off with the
Vehicle Ignition
G Gently insert a CD printed-side-up
into the slot, until you feel it stop.
If the device is correctly connected to
the vehicle ignition, and has not been
switched off with button >, it is switched
on and off along with the ignition.
The CD is then automatically drawn into
the device.
While the CD is being drawn in, do not
push or pull it.
You can also switch the device on when
the ignition is off:
The device switches on.The CD begins
playing.
G Press button >.
Note:
G To protect the vehicle battery, the
device is automatically switched off
after an hour if the vehicle ignition
is off.
Switching On and Off with the
release panel
G Remove the release panel.
The device switches off.
G Replace the release panel.
The device switches on. The most re-
cent settings (radio, CD, CD-changer or
AUX) are restored (no AUX on Dakota
CD31).
Switching on and off with button >
G Press button > to switch on.
G To switch off, hold button >
pressed for longer than two sec-
onds.
The device switches off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE VOLUME
Immediate Volume Reduction
(Mute)
You can reduce the volume immediate-
ly (mute) to a pre-set level.
Adjusting the Volume
The volume can be adjusted in steps
from 0 (off) up to 66 (maximum).
To increase the volume
G Press the button =.
To reduce the volume
G Press button > briefly
“MUTE” appears in the display.
G Press the button =.
Adjusting Muted Volume
The mute level is adjusted as follows:
G Press the MENU button :.
Setting Switch-On Volume
The volume the device plays at when
switched on can be adjusted as follows:
G Press the or button 9 until
“MUTE LVL” appears in the display.
G Press the MENU button :.
G Adjust the mute level with the
buttons 9.
G Press the or button 9 until
“ON VOL” appears in the display.
When the setting process is complete
G Adjust the switch-on volume with
G Press the MENU button :.
the
buttons 9.
To help you make this setting, the vol-
ume varies audibly as you adjust.
Muting During Phone Calls
If your car radio is connected to a mo-
bile telephone, then when the telephone
is taken “off the hook”, the car radio is
muted. The telephone conversation or
the speech output are reproduced via
the car radio speakers.This requires the
mobile telephone to be connected to the
car radio as described in the fitting in-
structions.
If you set“0”, then whatever volume was
in use before the device was switched
off will be reactivated.
Note:
G To avoid damage to hearing, the
maximum switch-on volume is “38”.
If the device was playing above this
volume when switched off, it will
switch on again at “38”.
The device volume is muted to the pre-
set mute level.
When the setting process is complete
G Press the MENU button :.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO OPERATION
Radio Operation
Adjusting Station Search
Sensitivity
You can choose whether to search only
for stations with strong signals, or wheth-
er weak stations should be included.
Switching on Radio Operation
If the current operating mode is CD, CD-
changer or AUX (only for Santa Fe
CD31)
G Press the MENU button :.
G Press the BAND button 2.
or
G Press the or button 9 until
“SENS HI” or “SENS LO” appears
in the display.
G Press the CD•C button 7 until
“RADIO” appears in the display.
“SENS HI” means maximum sensitivi-
ty, “SENS LO” means minimum sensi-
tivity.When “SENS LO” is selected, the
display shows “lo”.
Select Waveband/Memory Level
This radio receives stations in the VHF
(FM) waveband as well as MW and LW
(AM) stations.Three memory levels are
available for the FM waveband, and one
memory level is available for each of the
MW and LW bands. Five stations can
be stored in each memory level.
G Set the desired sensitivity with the
buttons 9.
G When the setting procedure
is complete, press the MENU
button :.
Selecting FM Memory Level
Manual Station Tuning
To switch between the FM memory lev-
els FM1, FM2 and FMT
You can also tune to the station manu-
ally.
G press the BAND button 2.
G Press the or button 9.
Saving a Station
Selecting AM waveband
To select the AM waveband
Saving a Station Manually
G press the BAND button 2 until
G Choose between memory levels
FM1, FM2, FMT or the AM wave-
band (MW/LW).
“AM” appears in the display.
Setting the Station
There are a number of ways to set the
station.
G Tune to the station you want.
G Choose one of the station buttons
1-5 ; on which you want to store
the station, and hold it pressed for
longer than one second.
Automatic Station Search
G Press the or button 9.
The next station that can be received is
tuned in.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO OPERATION
Stop SCAN, continue listening to a
station
Saving a Station Automatically
(Travelstore)
G Press the SCAN button 4 again.
The scanning process is stopped, and
the last set station remains active.
You can also save the five strongest sta-
tions in the area automatically. This is
done in the FMT or AM memory level,
depending on your chosen waveband.
Setting Scan Time
Note:
G Press the MENU button :.
G Any stations previously saved on
this level will be deleted.
G Press the or button 9 until
“SCANTIME” appears in the dis-
play.
G Briefly press the TS button 3.
Storing starts.“T-STORE”appears in the
display. When the procedure is com-
plete, the station in memory location 1
of the memory level in question is
played.
G Set the desired sampling time with
the
buttons 9.
G When the setting process is com-
plete, press the MENU button :.
Going to a Preset Station
Note:
G The chosen sampling time also ap-
plies to CD and CD-changer scans.
G Select the memory level where the
station is stored.
G Press the corresponding button 1-5
;.
Regional Tuner Settings
This device is fitted with a multiband
tuner which can be adjusted to specific
regional requirements. The regions
which can be set are:America, Europe,
Asia and Thailand. The radio only of-
fers full functionality in other countries if
it is set to the region in question.
Scanning through Available
Stations (SCAN)
You can listen to short samples from all
the stations that can currently be re-
ceived. The length of the samples can
be set, in the menu, to between 5 and
30 seconds.
Changing Tuner Setting
G Press the MENU button :.
Starting SCAN
G Press the or button 9 until
“FM TUNER” appears in the dis-
play.
G Hold down the SCAN button 4.
The scanning process starts. “SCAN”
appears briefly in the display, after which
the current frequency is displayed, flash-
ing.
G Set the region with the
9.
buttons
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO OPERATION
CD OPERATION
G When the setting is complete,
press the MENU button :.
CD Operation
This device can be used to play stan-
dard CDs with a diameter of 5 inches.
Note:
G Once you have changed the
regional setting, radio operation
begins at the pre-set frequency
87.5 MHz.
Danger of damage to CD drive!
This device is not suited for playing
so-called CD singles (3 inch diame-
ter) or shaped CDs.
No liability will be accepted for dam-
age caused to the CD drive by un-
suitable CDs.
Starting CD Operation
G If there is no CD in the drive
G Push the CD printed side up gently
into the CD slot until you feel it
stop.
The CD is then automatically drawn into
the device.
While the CD is being drawn in, do not
push or pull it.
The CD begins playing.
G If there is already a CD in the drive.
G Press the CD•C button 7 until
“CD” appears in the display.
The CD starts playing where it last
stopped.
Selecting a Track
G Press the
to select the next or previous track.
Pressing the button 9 once re-
/
or
/
button 9
/
starts the track currently playing.
Quick Track Selection
To skip tracks backwards or forwards
G Press the or button 9 until
skipping backwards or forwards be-
gins.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OPERATION
Stopping REPEAT
Fast Search (Audible)
To stop the repetition of the current track
To search rapidly backwards or forwards
G Press button 3 (RPT) ; again.
“RPT” disappears from the display and
normal play resumes.
G Hold down one of the
buttons
9 until fast searching begins.
Playing Tracks in Random
Sequence (MIX)
Pausing During Play
G Press button 4 (MIX) ;.
“MIX” appears in the display. The next
track is played at random.
G Press button 2 ;.
“PAUSE” appears in the display.
Continuing after the pause
G Press button 2 ; again.
Play resumes.
Ending MIX function
G Press button 4 (MIX) ; again.
“MIX” disappears from the display.
Changing Display Contents
To change the display between track
number and track number plus play time
Sampling Tracks (SCAN)
To listen to a short sample of each track
on the CD
G Press the MENU button :.
G Press the SCAN button 4.
G Press the or button 9 until
“CD DISP” appears in the display.
Note:
G The lengths of these samples can
be set. Please consult the section
on “Setting Scan Time” under “Ra-
dio Operation”.
G Press the button.
The current display mode is shown:
“TIME”for play time and“PLAY”for track
numbers.
Ending SCAN, Continue Listening to
Track
G Select the desired setting with the
button 9.
To halt the scan
G Press the MENU button : twice.
G Press SCAN 4 again.
Removing CD from Player
To remove a CD from the player
The track currently being sampled will
continue to play.
G Hold the CD•C button 7 pressed
Repeating Tracks (REPEAT)
To repeat a track
down until the CD is ejected.
G Press button 3 (RPT) ;.
“RPT” appears in the display.The track
is repeated until RPT is deactivated.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER OPERATION
CD Changer Operation
Changing Display Contents
To change the display between track
number plus CD number and track num-
ber plus play time
Note:
G For information on handling CDs,
inserting them and operating the
CD changer, please consult the op- G Press the MENU button :.
erating instructions for your CD
changer.
G Press the or button 9 until
“CDC DISP” appears in the display.
Starting CD Changer Operation
G Press the button 9.
G Press the CD•C button 7 until
“CHANGER” appears in the dis-
play.
The current display mode is shown:
“TIME” for play time and “CD NO” for
CD number.
Play will start with the first CD that the
CD changer recognises.
G Select the desired setting with the
button 9.
G Press the MENU button : twice.
Selecting a CD
To change up or down to a different CD
Repeat Playing Tracks or Whole
CDs (REPEAT)
To repeat the current track
G Press the or button 9 one or
more times.
Selecting a Track
G Press button 3 (RPT) ; briefly.
To change up or down to a different track
on the current CD
“RPT TRCK” flashes up briefly and the
display shows “RPT”.
To repeat the current CD
G Press the or button 9 one or
more times.
G Press button 3 (RPT) ; again.
“RPT DISC” flashes up briefly and the
display shows “RPT”.
Quick Track Selection
To skip tracks backwards or forwards
Stopping REPEAT
G Hold down the or button 9
until skipping backwards or for-
wards begins.
To stop the repetition of the current track
or CD
G Press button 3 (RPT) ; until the
display shows “RPT OFF” and
“RPT” disappears.
Fast Search (Audible)
To search rapidly backwards or forwards
G Hold down one of the
buttons
9 until fast searching begins.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER OPERATION
Note:
Playing Tracks in Random
Sequence (MIX)
To play the tracks of the current CD in
random sequence
G The lengths of these samples can
be set. Please consult the section
on “Setting Scan Time” under “Ra-
dio Operation”.
G Press button 4 (MIX) ; briefly.
Pausing During Play
“MIX CD”flashes up, the display shows
“MIX”.
G Press button 2 ( ) ;.
“PAUSE” appears in the display.
To play the tracks of all the CDs in the
CD changer in random sequence
Continuing after the pause
G Press button 2 ( ) ; again.
Play resumes.
G Press button 4 (MIX) ; again.
“MIX ALL” flashes up and the display
shows “MIX”.
Ending MIX function
To end the playing of tracks in random
sequence
G Press button 4 (MIX) ; until the
display shows “MIX OFF” and
“MIX” disappears.
Sampling All Tracks on All CDs
(SCAN)
To listen to a short sample of all tracks
on all the CDs in the CD changer
G Press the SCAN button 4.
“SCAN” appears in the display.
Ending SCAN
To halt the scan
G Press SCAN 4 again briefly.
The track currently being sampled will
continue to play.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK - TIME
CLOCK - Time
G Press the or button 9 to
switch modes.
Displaying the Time
To display the time
When the setting process is complete
G Press the MENU button :.
G Press the button < briefly.
Display the Time When the
Device is Switched Off But the
Ignition On
Setting the Time
G Press the MENU button :.
G Press the or button 9 until
“CLOCKSET” appears in the dis-
play.
To display the time when the device is
switched off and the ignition is switched
on
G Press the MENU button :.
G Press the button 9.
“MENU” appears in the display.
The time is shown in the display.
The minutes are blinking, and can be
adjusted.
G Press the or button 9 until
“CLOCK OFF” or “CLOCK ON” ap-
pears in the display.
G Adjust the minutes with the or
button 9.
G Press the or button 9 to
switch the display between ON and
OFF.
Having set the minutes
G Press the button 9.
The hours blink.
When the setting process is complete
G Press the MENU button :.
G Adjust the hours with the or
button 9.
Displaying the time briefly when
the device is switched off
To display the time briefly when the de-
vice is switched off
When the time setting procedure is com-
plete
G Press the MENU button : twice.
G Press the button <.
The time appears in the display for ap-
prox. eight seconds.
Choosing 12/24 Hour Clock
Mode
G Press the MENU button :.
“MENU” appears in the display.
G Press the or button 9 until
“24 H MODE” or “12 H MODE” ap-
pears in the display.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TONE AND VOLUME CONTROLS
G Press the or button 9 to ad-
Tone and Volume Controls
just the fader balance.
Adjusting the Bass
To adjust the bass
X-BASS
X-Bass means increased bass at low
volumes.
G Press the AUDIO button 8.
“BASS” appears in the display.
X-Bass can be increased in steps from
1 to 3.
G Press the or button 9 to ad-
just the bass.
G Press the X-BASS button 6.
Adjusting the Treble
G Press the
/
or
button 9
until the desired setting is dis-
played.
To adjust the treble
G Press the AUDIO button 8.
“BASS” appears in the display.
G When setting is complete, press
the X-BASS button 6.
G Press the or button 9 until
“TREB” appears.
G Press the or button 9 to ad-
just the treble.
Adjusting the Balance
To adjust the balance
G Press the AUDIO button 8.
“BASS” appears in the display.
G Press the or button 9 until
“BAL” appears.
G Press the or button 9 to ad-
just the balance.
Adjusting the Fader
To adjust the front/rear volume distribu-
tion (fader)
G Press the AUDIO button 8.
“BASS” appears in the display.
G Press the or button 9 until
“FADER” appears.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL AUDIO SOURCES
External Audio Sources
TECHNICAL DATA
Technical data
Instead of the CD-changer, you can
connect a different external audio
source that has a line output (not for
Dakota CD31). Such sources include
portable CD, MiniDisc or MP3 players.
To connect an external audio source,
you need an adapter cable (Blaupunkt
No. 7 607 897 093).
Amplifier
Output power:
4 x 25 Watt sine
wave according
to DIN 45 324
at 14.4 V
4 x 50 Watt
max. power
The AUX input must be switched on in
the menu.
Tuner
US Wavebands:
FM:
AM:
87.5 - 107.9 MHz
530 - 1710 kHz
Switching AUX input on and off
G Press the MENU button :.
Asian and European Wavebands:
G Press the or button 9 until
“AUX OFF” or “AUX ON” appears
in the display.
FM:
AM:
87.5 - 108 MHz
531 - 1602 kHz
G Press the or button 9 to
Thai Wavebands:
FM:
AM:
switch AUX on or off.
87.5 - 108 MHz
531 - 1629 kHz
G When setting is complete, press
the MENU button :.
FM mono sensitivity: 15 dBf
FM frequency response:
Note:
G If the AUX input is switched ON, it
can be selected via the CD•C but-
ton 7.
35 - 16,000 Hz
CD
Frequency response: 20 - 20,000 Hz
Pre-amp out (Santa Fe CD31)
4 channels:
4 V
Input sensitivities
(Santa Fe CD31)
AUX input:
2 V/ 6 kOhm
Subject to technical change!
18
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE
Guarantee
The extent of the guarantee depends
on the statutory conditions applicable
in the country where the device was
bought.
If there should be a fault in your device,
please refer to your dealer, providing
proof of purchase.
If the statutory minimum guarantee pe-
riod in your country is less than 12
months, Blaupunkt provides a 12 month
manufacturer’s guarantee. Damage
caused by wear, incorrect use or use
for commercial purposes are excluded
from this guarantee.
In order to make a claim on the basis of
Blaupunkt’s manufacturer’s guarantee,
please send the faulty device together
with proof of purchase to the central
Blaupunkt customer service depot in
your country.
You can obtain the nearest address from
the telephone hotline on the back of this
booklet.Blaupunkt reserves the right to
carry out a repair or to provide a substi-
tute device.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Service numbers / Numéros du service après-vente /
Números de servicio / Número de serviço
Tel.:
Fax:
Deutschland
Belgique / België
France
Nederland
Great Britain
Ireland
0 18 05 00 02 25
02.525.54.44
014 010 70 07
023 565 63 48
018 958 383 66
(01) 4149400
44 89 83 60
0 51 21 49 40 02
02.525.54.48
014 010 73 20
023 565 63 31
018 958 383 94
(01) 4598830
44 89 86 44
Danmark
Sverige
Norge
08 750 15 00
66 81 70 00
08 750 18 10
66 81 71 57
Suomi
Österreich
094 359 91
01 610 39 0
015 762 241
094 359 92 36
01 610 39 391
015 769 473
âeská republika
USA
Singapore
Slovensko
026 130 04 41
800-266 25 28
006 535 054 47
042 175 873 212
026 130 05 14
708-681 71 88
006 535 053 12
042 175 873 229
Blaupunkt GmbH
01/01 TRO
K7/VKD 8 622 402 733
Download from Www.Somanuals.com. All Manuals Search And Download.
|