© 2004. All rights reserved.
Black Box Corporation.
Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: [email protected]
INDUSTRIALMODEMRF115
Wireless async communication
that stands up to extreme
conditions—without sacrificing
data quality or speed.
.
ANT
P
VDC
C
I
O
15
RS-232
Industrial
Modem RF 1
CONFIG.
KeyFeatures
Each Industrial Modem
Choosing the Right Antenna for
Your Industrial Modem RF115
For ordinary line-of-sight
installations, the built-in antenna
may be all you need.
If you can’t get a direct line of
sight without separating the
modem from the antenna, choose
one of our Omnidirectional
Antennas.
If you need to transmit through
trees or non-metallic structures—
or if you want to increase signal-
to-noise ratio—choose a Yagi
(unidirectional) Antenna with
Bracket Mount.
he Industrial Modem RF115 is
Tdesigned to stand up to
includes a fixed whip antenna
with a 20-mile (32.2-km) line-of-
sight range. The modem can also
be outfitted with any of our
optional antennas. Choose from
omnidirectional or unidirectional
antennas—in a variety of cable
lengths and mounting options.
For additional security, the
modem features voltage clamps
and fuses to protect your
transmissions from electrical
surges found on power lines.
Data speeds of up to
electromagnetic and radio
interference, industrial motors,
115.2 kbps half-duplex.
Supports a distance of
up to 20 miles (32.2 km)
for line-of-sight, up
to 60 miles (96.6 km)
with 2 repeaters.
and temperature extremes found
in oil and gas fields and refineries,
utility substations, manufacturing
floors, military installations—
anywhere ordinary equipment
can’t go. This wireless async
modem uses Spread-Spectrum
technology to speed your data to
its final destination—safe and
error-free. Data travels over the
license-free 902–928-MHz radio
band.
You can use two modems in a
point-to-point configuration and
receive incoming signals from a
remote control device. Or use the
modem in a polled multipoint
configuration and communicate
with multiple remote devices. The
Modem’s DB9 connector is an
RS-232 interface. Optional RS-485
Modules are also available.
10- or 11-bit word
structure.
Offers Modbus RTU
protocol support.
Still Compatible
If you already have an
Optional antennas
available—
omnidirectional and
unidirectional.
Remember, you always need a
direct line of sight in any appli-
cation over a 0.25- to 0.5-mile (0.4-
to 0.8-km) range.
Industrial Modem RF115, don’t
worry—the MDR100A-R4 is
compatible with older models and
antennas.
We also offer adapter cables
for attaching older Industrial
Modem RF115s to newer
antennas or attaching older
antennas to newer Industrial
Modem RF115s.
10/8/2004#15626
1
Download from Www.Somanuals.com. All Manuals Search And Download.
|