BIPAC 5102 / 5102S / 5102G
(802.11g) ADSL2+ Modem/Router
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/Router
For more detailed instructions on configuring and using
the (802.11g) ADSL Router, please refer to the on-line
manual.
Package Contents
BIPAC 5102 series ADSL2+ Modem/Router
CD-ROM containing the on-line manual
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
AC-DC power adapter (12VDC, 1A) : BIPAC 5102 / 5102G
AC-AC power adapter (9VAC, 1A) : BIPAC 5102S
This Quick Start Guide
ꢀ
ꢀ
ꢀ
Do not use the ADSL2+ Modem/Router in high humidity or high
temperatures.
Do not use the same power source for the ADSL2+
Modem/Router as other equipment.
Do not open or repair the case yourself. If t he ADSL 2+
Modem/Router is too hot, turn off the power immediately and
have it repaired at a qualified service center.
Warning
ꢀ
Avoid using this product and all accessories outdoors.
ꢀ
ꢀ
Place the ADSL2+ Modem/Router on a stable surface.
Only use the power adapter that comes with the package. Using
a different voltage rating power adaptor may damage the router.
Attention
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
The Front LEDs
BIPAC 5102
BIPAC 5102S
BIPAC 5102G
LED
Meaning
1
2
PPP :
Lit steady when there is a PPPoA / PPPoE connection.
ADSL:
Lit when successfully connected to an ADSL DSLAM (“linesync”).
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps.
Blinking when data is Transmitted / Received.
3
4
LAN Port:
WLAN :
(5102G
only)
Lit green when the wireless connection is established.
Flashes when sending/receiving data.
5
6
SYS :
Lit when the system is ready.
Lit when power is ON.
PWR :
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/Router
The Rear Ports
BIPAC 5102
2
5
3
4
BIPAC 5102S
BIPAC 5102G
4
2
5
3
5
4
3
1
Port
Meaning
Power Switch
1
2
Power ON/OFF switch
PWR
Connect the supplied power adapter to this jack.
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
3
RESET
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
LAN
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four
LAN ports when connecting to a PC or an office/home network of
10Mbps or 100Mbps.
(RJ-45
4
5
connector)
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
ADSL (LINE)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Connecting BIPAC 5102
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/Router
Connecting BIPAC 5102S
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Connecting BIPAC 5102G
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR, SYS, and WLAN LEDs are lit steadily and that the relevant LAN LED is
lit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/Router
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic
View). In the Control Panel, double-click on
Network Connections
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Configuring PC in Windows 2000
1. Go to Start / Settings / Control Panel. In the Control
Panel, double-click on Network and Dial-up
Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/Router
Configuring PC in Windows 98/Me
1. Go to Start / Settings / Control Panel. In
the Control Panel, double-click on Network
and choose the Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or the name of your
Network Interface Card (NIC) in your PC.
3. Select the Obtain an IP address
automatically radio button.
4. Then select the DNS Configuration tab.
5. Select the Disable DNS radio button and
click OK to finish the configuration.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Configuring PC in Windows NT4.0
1. Go to Start / Settings / Control Panel. In
the Control Panel, double-click on Network
and choose the Protocols tab.
2. Select TCP/IP Protocol and click
Properties.
3. Select the Obtain an IP address from a
DHCP server radio button and click OK.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/Router
Configuring Your ADSL Firewall Router
To configure this device, you must have IE 5.0 / Netscape
4.5 or above installed
1. Open the web browser and type
http://192.168.1.254 in the browser’s
address box. This number is the default IP
address for this router. Press Enter.
2. A username and password window will
appear. The default username and
password are admin and admin. Press
OK to proceed.
3. You will get a status report on web page.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Verifying Your Local Network Connection with the Device
To see if this ADSL Router is
visible on the local network, go
to Start / Run. In the Run dialog
box, type “ping 192.168.1.254”
then press OK.
A command prompt window will
pop out.
If your ping is
successful which means your
local network is able to reach to
the device, then the command
prompt window will close up
automatically.
Connection fails, when you see
“Request timed out” in the
command prompt window. You
may need to check your set up.
Product Support and Contact Information
Most problems can be solved by referring to the Troubleshooting section in the User’s Manual.
If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer
where you purchased this product.
Contact Billion
WORLDWIDE
Mac OS is a registered Trademark of Apple Computer, Inc.
Windows 98, Windows NT, Windows 2000, Windows Me and Windows XP are registered Trademarks of Microsoft
Corporation.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|