BIPAC-221
USB ISDN TA with 2 Analog Ports
Quick Start Guide
This product is designed for the ISDN with Basic Rate Interface.
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC-221
Installing the BIPAC-221
ISDN S0
RJ-45 jack
Power jack
USB port
Phone ports
POWER
ISDN S.
USB
1. Connect the external power adapter to the power jack. All
the LEDs light and then go off one by one, except that the
PWR LED will still light.
2. Connect your ISDN line to the ISDN S0 RJ-45 jack.
3. Connect your analog telephone and/or G3 fax machine to
the phone ports.
4. Connect a headset to the “MIC/SPK” jacks.
5. Connect the USB cable to the USB port and connect the
other end to the PC.
For Windows 98:
1. Start Windows. After the opening banner, Windows will
tell you that the new device has been detected. You will
then see the following screen. Click “Next >”.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
2. In the next window, select “Search for the best driver for your
device” and click “Next >”.
3. Insert the installation CD into the CD-ROM drive and
check “CD-ROM drive” in the next window.
4. Continue through the Wizard, clicking the “Next >”
buttons. Windows will start copying files to your system.
You will see the following screen prompting for the path
of the Windows source files. Please specify a location.
Click “OK”. Then, click “Finish” in the next window to end
the installation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC-221
5. If you are prompted to restart the computer after Windows
finishes installing the driver, press “Yes”.
For Windows Me:
1. Start Windows. After the opening banner, Windows will
tell you that the new device has been detected. Select
“Specify the location of the driver” and click “Next >”.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
2. In next window, select “Search for the best driver for your
device”. Insert the installation CD into the CD-ROM drive
and check “Removable Media”. Click the “Next >” button.
3. Continue through the Wizard, clicking “Next >” at the
following screens. Windows will start copying files to
your system. Then, click “Finish” in the following window.
4. If you are prompted to restart the computer after Windows
finishes installing the drivers, press “Yes”.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC-221
For Windows 2000:
1. Start Windows. After the opening banner, Windows will
tell you that the new device has been detected. Click
“Next>”.
2. In next window, select “Search for a suitable driver for my
device”. Click “Next>”.
3. Insert the installation CD into the CD-ROM drive, then in
the next window check “CD-ROM drives” and click “Next>”.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
4. Click “Next>” to install the driver. When the following
windows titled “Digital Signature Not Found” appear, press
“Yes” to continue the installation.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC-221
5. Press “Finish” to end the installation.
For Windows XP:
1. Start Windows. After the opening banner, Windows will
tell you that the new device has been detected. Select
“Install the software automatically”. Insert the installation CD
into the CD-ROM drive and click “Next >”.
2. When next window appears, press “Next >” to continue
the installation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
3. Click “Continue Anyway” when the following “Hardware
Installation” windows appear.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC-221
4. Press “Finish” to end the installation.
ISDN Utility and Diagnostic Program
The ISDN Utility includes helpful programs for the USB ISDN
TA, such as a diagnostic program, an uninstallation program,
and an on-line manual.
After Windows installs the driver of your ISDN TA, the ISDN
Utility may be installed automatically. If the ISDN Utility is not
installed, you may install it from the installation CD.
You are highly recommended to run the diagnostic program to
make sure the USB ISDN TA, its drivers and the ISDN line are
all properly installed and connected. Please follow these
instructions:
1. Open the “Programs” folder on the “Start” menu and click
on the “ISDN Utility” program folder.
2. Click on the “Diagnostic Program” item to start the program.
3. In the “Own ISDN Number” box, type in the subscriber
number of your ISDN line.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
4. Press “Loopback Test” to begin the diagnostic procedure. It
will make a call from the B1 channel that returns through
the B2 channel. The D and B channels will be tested for
line integrity.
Uninstalling BIPAC-221
If you decide to permanently remove the driver and utility of the
USB ISDN TA from your system, you must run the
uninstallation program from the ISDN Utility program group as
follows:
1. Click “Start”, “Programs” and click the “ISDN Utility” item.
2. Click the “Uninstall DRV & UTL” item. The following ISDN
Uninstallation Program window opens.
3. Check the items that you want to completely remove from
the Windows system and click “OK”.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC-221
Product Support
If you have any problem with the USB ISDN TA, please contact
the dealer where you bought this product. If you have any other
question, you can contact Billion Electric Co., Ltd. directly at
the following email address: [email protected]
You can also download upgraded driver or software utilities for
free from Billion’s web site at http://www.billion.com.tw/
For more detailed instructions on configuring and
using the device, please refer to the on-line manual
in the installation CD.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|