T2210HD/T2210HDA
21.5’’ Wide-Screen LCD Monitor
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Package contents
1. LCD Monitor
2. Monitor Base (the shape of base may vary according to
the monitor model)
3. Power Cord (plug may vary according to the electrical
standards for your area)
4. Analog Signal Cable
5. Digital Signal Cable (optional)
6. Audio Cable
7. Quick Installation Guide
8. CD-ROM (contains user manual)
Please install monitor drivers from the CD-ROM. The
T2210HD driver is named "BENQT2200HD.inf", and the
T2210HDA driver is named "BENQT2200HDA.inf".
Package contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation
To connect the monitor to your PC
Make sure that the PC and monitor are unplugged.
1. Connect the signal cable (VGA or DVI) to the monitor and the PC.
2. Connect the audio cable to the monitor and the PC.
3. Connect the separate power cable to the monitor and a grounded outlet.
4
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Adjusting your monitor
Functions of the buttons and indicator
Item
Function
Enter OSD menu, select item, enter submenu, and confirm recall.
1. Positive adjustment, change within several selections.
Enter
X
2. Hot key of "Brightness".
1. Minus adjustment, change within several selections.
W
2. Hot key of "Contrast".
1. Leave menu, cancel recall. (Settings will be saved automatically after
adjustments are made.)
Exit
2. Hot key of "Input Select".
Hot key of auto adjustment (for geometric settings only).
Auto
OSD icon list
Icon
Function
Description
Auto Adjust
* Optimize the picture performance automatically
* Select the input from Analog and Digital Inputs
* Factory default: Analog (VGA)
Input Select
Not for T2210HDA.
Audio
* Select "Volume" and "Mute" submenu
Luminance
Geometry
Color
* Select "Brightness" and "Contrast" adjustment submenu
* Select "H. Position", "V. Position", "Pixel Clock" and "Phase"
adjustment submenu
* Select color temperature or to set up user mode
OSD
* Adjust the position and time of OSD menu on the screen
* Select your own preference of language of OSD menu
* Reset monitor parameters back to factory preset value
Language
Recall
Adjusting your monitor
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Miscellaneous
Brightness
Contrast
* Select "Miscellaneous" adjustment submenu
* Adjust the luminance of the screen
* Adjust the contrast level of the screen
* Shift the screen left or right
H. Position
V. Position
Pixel Clock
Phase
* Shift the screen up or down
* Adjust the monitor internal sampling clock rate
* Adjust the monitor internal signal phase
OSD H. Position * Shift the OSD left or right
OSD V. Position
OSD Time
Sharpness
DDC/CI
* Shift the OSD up or down
* Set OSD display duration time
* Adjust the sharp level of the screen
* Switch "DDC/CI" On or Off
* Show the display information
* Adjust the level of the sound
* Turn the sound to mute
Information
Volume
Mute
DCR
* Switch "DCR" On or Off
Display Mode
* Switch "Display Mode": Aspect/Full
6
Adjusting your monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Troubleshooting
Symptom
Remedy
*Blank Screen*
Power indicator is off
• Make sure the power cable is connected properly (see
• Make sure that the monitor was turned on using the
power switch (see To connect the monitor to your PC
Power indicator lights orange
Power indicator lights green
• Perhaps a power saving mode is active? Press any key
on your keyboard or move the mouse.
• A screen saver may have activated automatically after a
certain period of inactivity. Press any key on your key-
board or move the mouse.
"No Signal Detected!" message
• Is the signal cable connected to the monitor and the
• Is the PC turned on (see your PC's documentation)?
*Display Problems*
Image is displaced to the left/right
or to the top/bottom
• If the image appears normal but off-center, you can
adjust it using the OSD functions. For further informa-
Image is blurred
• Check brightness and contrast settings (see "Lumi-
• Check the sharpness setting (see "Sharpness" in the
OSD icon list section).
Color problems
• If the colors are off (e.g., white is not really displayed as
white etc.), you should adjust the color temperature
*Sound problems*
• Is the audio cable connected to the monitor and the
PC’s audio out port?.
• Is the volume muted (see "Volume" and "Mute" in the
OSD icon list section)?
Troubleshooting
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Specifications
21.5’’ Wide-Screen LCD monitor
Item
T2210HD/T2210HDA
Display Size
Pixel Pitch
476.64 (H) x 268.11 (V) mm
0.248 (H) x 0.248 (V) mm
Panel
Monitor
Display Colors
16.7M colors
Horizontal: 30 - 83 KHz
Input Signal
Frequency
Vertical: 56 - 76 Hz
D-sub 15 pin
Analog
Digital
Connector
Tilt
DVI 24 pin (Not for T2210HDA)
-5° - 20°
Tilt Angle
Dimensions
(W x H x D)
Net
516.4(W) x 386.7(H) x 211.6(D) mm
Weight
Net
4.2 kg
AC
AC 100-240V, 50-60 Hz
Active: < 52W / Standby: < 2W
Power
Consumption
8
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
|