Belkin Switch F1DP108Gea User Manual

OmniView SMB

KVM-over-IP Switch

User Manual

F1DP108Gea

F1DP116Gea

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

1. Introduction

Package Contents

2. Overview

Remote-Management Features

Other Features

Equipment Requirements

System Requirements

Unit Display Diagrams

Specifications

3. Local Installation

Pre-Configuration

Mounting the Switch

Connecting the Console to the Switch

Connecting Servers to the Switch

Powering Up the Systems

Daisy-Chaining Multiple KVM Switches (Optional)

4. Remote Installation

Identifying the IP Address

Logging into the Web Interface

Network Configuration

User Settings

Switch Configuration

Serial Settings

Security Settings

Maintenance

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

5. Using the Switch from a Remote Console

Starting a Remote Session

Using the Quick-Access Toolbar

Mouse Configuration and Settings

Keyboard Configuration and Settings

Video Configuration and Settings

Performance Settings

Selecting a Server

Additional Features

Restoring Factory Defaults

6. Using the Switch from a Local Console

Selecting a Server or BANK

AutoScan Mode

On-Screen Display

Hot-Key-Command Shortcuts

Sun Combo Keys

Updating Firmware

7. Frequently Asked Questions

8. Troubleshooting

9. Glossary

10. Information

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Congratulations and thank you for purchasing the Belkin OmniView SMB

KVM-over-IP Switch (the Switch). This Switch provides enterprise-class,

remote server management and allows you to monitor and control your

servers from any location over a Transmission Control Protocol/Internet

Protocol (TCP/IP) connection. This round-the-clock access enables you to

troubleshoot servers faster and more efficiently, reducing server downtime

and service costs.

This User Manual provides all the details you’ll need to install and operate

your new Switch, in addition to expert troubleshooting advice—in the

unlikely event of a problem. For quick and easy installation, please refer to

the Quick Installation Guide included in your packaging.

We appreciate your business and are confident that you will soon see for

yourself why over 1 million Belkin OmniView products are in use worldwide.

Package Contents

OmniView SMB

KVM-over-IP Switch

Rack-Mount

Brackets

IEC Power Cord

Serial Cable

with Screws

DB9-to-RJ11

Serial Flash

Cable

User Manual

Installation Guide

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview

Remote-Management Features

• Digital or Local User

The Switch allows one user to access and control multiple servers from a local

console, or from any remote console over a TCP/IP connection.

Web-Browser Based

You can access the Switch from any computer connected to the LAN, WAN, or

Internet using Microsoft Internet Explorer version 6.0 or higher.

BIOS-Level Access

The Switch allows you to remotely access the basic input/output system (BIOS)

of your servers to make changes and perform reboots, regardless of network

connectivity or server condition.

User-Friendly Interface

The web-based interface allows you to set up and change the Switch’s

functions quickly and easily through your web browser, without having to install

additional software onto your computer.

Serial-Device Support

The Switch provides support for one serial device, such as a power distribution

unit (PDU), so you can remotely perform hard reboots of your servers.

Enhanced Security

The Switch provides 128-bit Secure Sockets Layer (SSL) encryption and

password protection to prevent unauthorized access to your servers and

protect data transferred over the Internet.

Digital Collaboration

Up to eight users can simultaneously view digital video to share technical

expertise and troubleshoot servers collaboratively.

Video Resolution

The Switch supports video resolutions of up to 1600x1200 @ 75Hz for both

local and remote consoles.

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview

Other Features

• CAT5 Technology

Integrated CAT5 technology enables you to connect the Switch to your

servers up to 100 feet (30m) away using standard CAT5 cabling and

compact Server Interface Modules. CAT5 cabling reduces cable bulk,

simplifies deployment, and allows for greater airflow in your racks,

increasing the life span of your equipment.

• Keep-Alive Intelligence

Belkin’s compact Server Interface Modules feature keep-alive intelligence,

which allows your servers to continue running in the event of power loss to

the Switch or when replacing cabling.

• KVM Expansion

The Switch can be daisy-chained with up to 15 OmniView SMB and PRO2

KVM Switches to support up to 256 servers, so your KVM configuration can

expand as your server environment grows.

• Multiple-Platform Support

The Switch supports PS/2 and USB servers, including Windows

UNIX /Linux , and Sun

• On-Screen Display (OSD)

The Switch features an On-Screen Display (OSD) to simplify server

management for local users. The OSD allows you to assign names to

servers and to switch easily from one server to the next.

• Firmware Updates

Flash upgrades allow you to obtain the latest firmware updates for your

Switch. These firmware updates ensure that the Switch is compatible with

the latest devices and hardware and are free for the life of the Switch. Visit

www.belkin.com for upgrade information and support.

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview

Equipment Requirements

Server Interface Modules

Connecting the Switch to a server

requires a custom Belkin OmniView SMB

Server Interface Module and a standard

CAT5 patch cable.

OmniView SMB Server

Interface Modules:

F1DP101AeaAP

F1DP101AeaAP (PS/2 style)

F1DP101AeaAU (USB style)

F1DP101AeaAL (Legacy Sun

miniDIN8 style)

F1DP101AeaAP-8PK (PS/2 style, 8-pack)

Note: Product codes and availability

may vary.

F1DP101AeaAU

F1DP101AeaAL

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview

Cables

Belkin highly recommends you use

Belkin Category 5e, FastCAT5e, or

Category 6 Patch Cables for your SMB

KVM-over-IP Switch to help ensure the

superior performance of your video.

These Cables offer the highest quality

possible to ensure optimal data and

video transmission.

A3L791-XX-YYY

A3L850-XX-YYY

A3L980-XX-YYY

Belkin UTP Patch Cables:

A3L791-XX-YYY (CAT5e)

A3L850-XX-YYY (FastCAT 5e)

A3L980-XX-YYY (CAT6)

Note: Use CAT6 solid cables for

optimal video at longer lengths.

To connect multiple Switches together,

a custom Belkin OmniView Daisy-Chain

Cable is required.

OmniView Daisy-Chain Cable:

F1D108-CBL

(-XX denotes length in feet)

(-YYY denotes color)

Note: Product codes and availability

may vary.

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview

System Requirements

Operating-System (OS) Platforms

The SMB KVM-over-IP Switch is compatible with CPUs running on, but not

limited to, the following OS platforms:

• Windows NT , 95, 98, 2000, Me, XP, Server 2003

• Microsoft DOS 5.x and above

• Red Hat Linux 8.x and above

• Sun

• Novell 5.x

• Solaris 8.x and above

Keyboards

• PS/2-compatible

Mice

• PS/2-compatible with 2, 3, 4, or 5 buttons

• PS/2-compatible wireless and optical mice

Monitors

• CRT and LCD (with VGA support)

Remote-Console Software

The SMB KVM-over-IP Switch may be accessed remotely over a TCP/IP

connection from computers using the following web browsers and OS platforms:

• Microsoft Internet Explorer 6.0 and above with ActiveX support

• Windows NT, 2000, XP

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview

Unit Display Diagrams

Front View

AutoScan Button

LED Indicators for

Port Identification

7-Segment LED for

BANK Identification

�

��

�

��

Port Selectors

BANK

Scroll Buttons

(F1DP116Gea model shown)

Back View

Daisy-Chain Port

Console VGA

Monitor Port

Serial-Device Port

AC Power

CPU Connections

Using CAT5 Cabling

��

Ethernet

Connection

Cooling Fan

Console PS/2

Mouse/Keyboard

Ports

Flash-Upgrade Port

Go-Local Button

(F1DP116Gea model shown)

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview

Specifications

Part No.:

F1DP108Gea, F1DP116Gea

1 digital or 1 local

No. of Users Supported:

No. of Servers Supported:

8 and 16 respectively for 8- and

16-port models

Daisy-Chain:

Enclosure:

Maximum of 16 Switches*

Metal enclosure with high-impact

plastic faceplate

Power Requirements:

Operating Temp:

Storage Temp:

100–240VAC @ 47–63Hz/1A

0° to 40° C

-20° to 60° C

Humidity:

0-80% RH, non-condensing

Video-Resolution Support:

Local analog port:

Digital port:

Up to 1600x1200 @ 75Hz

Console Keyboard Emulation: PS/2

Console Mouse Emulation:

Console Keyboard Input:

Console Mouse Input:

Console Monitor Port:

CPU Ports:

PS/2

MiniDIN6 (PS/2)

HDDB15 female (VGA)

RJ45

Ethernet Port:

RJ45 (10/100Base-T connection)

Typical Bandwidth:

Serial-Device Port:

Flash-Upgrade Port:

Power Connection:

Port Selectors:

0.31Mbps**

RJ45

RJ11

IEC

8 and 16 respectively for 8- and

16-port models

LED Indicators:

Warranty:

8 and 16 respectively for 8- and

16-port models

2 years

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview

Dimensions:

(F1DP108Gea) 17.25 x 1.75 x 7.5 in.

(438 x 45 x 190mm)

(F1DP116Gea) 17.25 x 1.75 x 7.5 in.

(438 x 45 x 190mm)

Weight:

(F1DP108G) 5.0 lbs. (2.3kg.)

(F1DP116G) 5.0 lbs. (2.3kg.)

*May be daisy-chained with up to 15 OmniView SMB and PRO2 KVM Switches. OmniView

SMB KVM-over-IP Switches may not be daisy-chained together.

**Typical bandwidth is defined as typical “non-intensive” administrative use at 16-bit color,

1024x768 resolution.

Note: Specifications are subject to change without notice.

SMB Server Interface Module, PS/2

Part No.:

Emulation:

Power:

F1DP101AeaAP

Keyboard and mouse signals

Via attached server

Keyboard/Mouse Connection: MiniDIN6 (PS/2)

Monitor Connection:

Resolution Support:

Max. Distance Supported:

Weight:

HDDB15 male (VGA)

Up to 1600x1200 @ 75Hz

100 ft. (30m)

0.25 lbs. (0.11kg.)

Unit Dimensions:

VGA-Cable Length:

PS/2-Cable Length:

1.8 x 3.5 x 0.9 in. (46 x 89 x 23mm)

8 in. (203mm)

19 in. (483mm)

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview

SMB Server Interface Module, USB

Part No.:

Emulation:

Power:

F1DP101AeaAU

Keyboard and mouse signals

Via attached server

Keyboard/Mouse Connection: USB Type A

Monitor Connection:

Resolution Support:

Max. Distance Supported:

Weight:

HDDB15 male (VGA)

Up to 1600x1200 @ 75Hz

100 ft. (30m)

0.25 lbs. (0.11kg.)

Unit Dimensions:

VGA-Cable Length:

USB-Cable Length:

1.8 x 3.5 x 0.9 in. (46 x 89 x 23mm)

8 in. (203mm)

19 in. (483mm)

SMB Server Interface Module, Legacy Sun

Part No.:

Emulation:

Power:

F1DP101AeaAL

Keyboard and mouse signals

Via attached server

Keyboard/Mouse Connection: MiniDIN8 (Legacy Sun)

Monitor Connection:

Resolution Support:

Max. Distance Supported:

Weight:

HDDB15 male (VGA)

Up to 1600x1200 @ 75Hz

100 ft. (30m)

0.25 lbs. (0.11kg.)

Unit Dimensions:

VGA-Cable Length:

SUN-Cable Length:

1.8 x 3.5 x 0.9 in. (46 x 89 x 23mm)

8 in. (203mm)

19 in. (483mm)

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Pre-Configuration

CAT5 Cables

OmniView SMB

KVM-over-IP Switch

Server Interface

Modules

PS/2, USB and

SUN servers

LAN/WAN

Local Console

User

(Typical Switch configuration)

Where to place the Switch:

The enclosure of the Switch is designed for stand-alone or rack-mount

configuration. The Switch can be mounted to a standard 19-inch server rack

using the included rack-mount brackets and screws.

Consider the following when deciding where to place the Switch:

• whether or not you intend to use the front-panel port selectors

• the lengths of the cables attached to your keyboard, monitor, and mouse

• the location of your servers in relation to your console

• the lengths of the cables you use to connect your servers to the Switch

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Cable-Distance Requirements (for PS/2, USB, and Sun Servers)

VGA signals transmit best up to 100 feet (30m). Beyond that length, the

probability of video degradation increases. For this reason, Belkin recommends

that the length of the CAT5 UTP cable between the Switch and the connected

servers does not exceed 100 feet (30m).

Note: The Belkin CAT5 Extender (F1D084vea2) may be used to extend your

console (keyboard, mouse, and monitor) by up to 300 feet (91m).

Warning: Avoid placing cables near fluorescent lights, air-conditioning

equipment, or machines that create electrical noise (e.g., vacuum cleaners).

You are now ready to begin installation of your Switch. The following

sections (pages 13–22) provide complete instructions for the hardware

setup of a single Switch (F1DP108Gea, F1DP116Gea).

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Step 1 Mounting the Switch

Note: Before you begin, locate the MAC address and device number on the

back of the Switch. You will need these numbers later in the installation process,

so it is highly recommended that you record these numbers below before

mounting the Switch to your rack.

MAC Address

Device Number

The Switch includes adjustable mounting brackets ideal for installation in

19-inch racks. The mounting brackets feature three adjustment positions that

allow you to set the Switch’s face flush with the ends of the rails, or to extend the

Switch past the front of the rails. Please follow these simple steps to achieve the

desired adjustment.

1.1 Determine how far you would like the Switch to protrude from the rack.

Select a bracket-hole scheme.

1.2 Attach the bracket to the side of the Switch using the Phillips screws

provided. (Refer to diagram below.)

1.3. Mount the Switch to the rack rails. (Refer to diagram below.)

Your Switch is now mounted securely to the rack and you are ready to

connect your console.

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Step 2 Connecting the Console to the Switch

2.1 Connect your monitor VGA cable to the VGA port on the back of the

Switch in the “Console” section. (Refer to diagram below.)

��

2.2

and mouse ports on the back of the Switch in the “Console” section.

(Refer to diagram below.)

��

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

2.3 Locate and connect a cable from your local area network to the RJ45

Ethernet port on the back of the Switch. (Refer to diagram below.)

��

2.4 Attach the power cord to the IEC power jack on the back of the Switch,

and power up the Switch. (Refer to diagram below.)

��

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Step 3 Connecting Servers to the Switch

(PS/2 Connection)

3.1 Make sure your server is powered off.

3.2 Using the Belkin OmniView SMB Server Interface Module for PS/2

(F1DP101AeaAP), connect the VGA connector to the monitor port on

your server. (Refer to diagram below.)

Server

Server Interface Module

3.3

keyboard ports on the server. (Refer to diagram below.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

3.4 Connect the Switch to the Server Interface Module using the

included Belkin CAT5e Patch Cable or other CAT5 cable. (Refer to

diagram below.)

��

3.5 Power up your server.

3.6 Repeat steps 3.1 through 3.5 for each additional PS/2 server you wish

to connect.

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Step 3 Connecting Servers to the Switch

(USB Connection)

3.1 Make sure your server is powered on.

3.2 Using the Belkin OmniView SMB Server Interface Module for USB

(F1DP101AeaAU), connect the VGA connector to the monitor port on

your server. (Refer to diagram below.)

Server

Server Interface Module

3.3 Connect the USB connector to an available USB port on the server.

(Refer to diagram below.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

3.4 Connect the Switch to the Server Interface Module using the included

Belkin CAT5e Patch Cable or other CAT5 cable. (Refer to diagram

below.) Your server should recognize your Server Interface Module and

automatically install the HID USB driver if necessary.

��

3.5 Repeat steps 3.1 through 3.4 for each additional USB server you wish

to connect.

Note: We recommend you attach the Server Interface Module cable

directly to a free USB port on your server with no USB devices in between.

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Step 3 Connecting Servers to the Switch

(Sun MiniDIN8 Connection)

3.1 Make sure your server is powered off.

3.2 Using the Belkin OmniView SMB Server Interface Module for Legacy

Sun (F1DP101AeaAL), connect the VGA connector to the monitor port

on your server. (Refer to diagram below.)

Server

Server Interface Modul

3.3 Connect the miniDIN8 connector to the miniDIN8 keyboard port on the

server. (Refer to diagram below.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

3.4 Connect the Switch to the Server Interface Module using the

included Belkin CAT5e Patch Cable or other CAT5 cable. (Refer to

diagram below.)

��

3.5 Power up your server.

3.6 Repeat steps 3.1 through 3.5 for each additional Sun server you

wish to connect.

Note: When a USB or Sun Server Interface Module is connected to a Sun

server, the Server Interface Module emulates the Sun keys using a set of

key combinations called combo keys. Refer to the table on page 67 for a

list of Sun functions supported by the Switch.

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Step 4 Powering Up the Systems

4.1 If you have not already done so, power on all servers connected to

the Switch (servers can be powered on simultaneously). The Switch

emulates both a mouse and keyboard on each port and allows

your server to boot normally. The server connected to port 1 will be

displayed on the monitor.

4.2 Check that the keyboard, monitor, and mouse are working normally.

4.3 Using the port selectors, check all occupied ports to verify that all

servers are connected and responding correctly. If you encounter an

error, check your cable connections for that server and reboot. If the

problem persists, please refer to the “Troubleshooting” section in this

User Manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Daisy-Chaining Multiple KVM Switches (Optional)

Note: If you are only installing a single SMB KVM-over-IP Switch, skip

to the “Remote Installation” section on page 28.

You can daisy-chain up to 15 additional OmniView SMB and PRO2 KVM

Switches to your OmniView SMB KVM-over-IP Switch, allowing a server

administrator to manage up to a maximum of 256 servers from one local or

remote console. Each daisy-chained KVM Switch is referred to as a “BANK” and

is assigned an address. The SMB KVM-over-IP Switch connected to the console

keyboard, mouse, and monitor can only function as the “primary” KVM switch.

BANKs 01 through 15 are referred to as “secondary” KVM switches.

Note: The SMB KVM-over-IP Switch can only function as the primary KVM

switch. You cannot daisy-chain two SMB KVM-over-IP Switches together.

Note: A Daisy-Chain Cable (F1D108-CBL-XX) is required to daisy-chain

each KVM Switch and is available through your Belkin reseller, or online at

www.belkin.com (U.S. only).

How to Assign a BANK Address

All SMB CAT5 and PRO2 KVM Switches feature a “BANK DIP” switch. The

“BANK DIP” switch is used to assign the proper BANK address to each

KVM Switch.

• For a multiunit configuration, the “BANK DIP” switch for each secondary unit

must be set to a unique BANK address (from 01 through 15). Refer to the chart

on page 24 for “BANK DIP” switch settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Dip Switch settings for SMB CAT5 (F1DP104Aea, F1DP108Aea

and F1DP116Aea).

BANK-DIP-Switch-Configuration Chart

DIP SWITCH

BANK ADDRESS

N/A

BANK 00 Primary

(SMB KVM-over-IP Switch)

DOWN

BANK 01 Secondary

BANK 02 Secondary

BANK 03 Secondary

BANK 04 Secondary

BANK 05 Secondary

BANK 06 Secondary

BANK 07 Secondary

BANK 08 Secondary

BANK 09 Secondary

BANK 10 Secondary

BANK 11 Secondary

BANK 12 Secondary

BANK 13 Secondary

BANK 14 Secondary

BANK 15 Secondary

DOWN

Example:

Three SMB CAT5 16-Port KVM Switches (F1DP116Aea) are daisy-chained

together with an SMB KVM-over-IP 1x16 Switch (F1DP116Gea) to manage up

to 64 servers. The DIP switches on the secondary units are each set to a unique

BANK address (between 01 and 03).

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Example of Daisy-Chain Configuration

��

BANK 00 SMB KVM-over-IP Switch

BANK 01 Secondary Switch

BANK 02 Secondary Switch

BANK 03 Secondary Switch

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Getting Started:

1. Make sure that all servers and Switches are powered off and that each

KVM Switch has been assigned a unique BANK address.

2. Place the SMB KVM-over-IP Switch and all secondary KVM Switches in

the desired location.

3. Connect the console monitor, keyboard, and mouse to the console ports

of the SMB KVM-over-IP Switch. Refer to “Connecting the Console to the

Switch” on page 14.

Connecting the Primary and Secondary KVM Switches:

1. Using the Daisy-Chain Cable (F1D108-CBL-XX), connect one end to the

“Daisy-Chain” port on the SMB KVM-over-IP Switch.

2. Connect the other end of the Daisy-Chain Cable to the “Primary Input/

Secondary Output” port of the first secondary KVM Switch (BANK 01).

3. To add secondary units, connect one end of the Daisy-Chain Cable to the

“Secondary Input” on the first secondary KVM Switch and the other end

to the “Primary Input/Secondary Output” port of the next secondary KVM

Switch (for example, BANK 01).

4. Repeat step 3 for additional KVM Switches you wish to add to your

daisy-chain configuration.

Download from Www.Somanuals.com. All Manuals Search And Download.

Local Installation

Connecting the servers:

1. Connect all servers to the SMB KVM-over-IP Switch and secondary KVM

Switches. Refer to the “Connecting Servers to the Switch” section on

page 16 for instructions.

2. Make sure that the power adapter is connected to the SMB KVM-over-IP

Switch and that the Switch is powered on. You should see the Switch

light up and display the digits “00”, indicating its BANK address.

3. Power up the secondary KVM Switches sequentially, beginning with BANK

01, by connecting each unit’s power supply. Each KVM Switch should

display its corresponding BANK address number as it is powered up.

Note: If the secondary KVM Switches do not enumerate correctly, reset

the SMB KVM-over-IP Switch (BANK 00) by simultaneously pressing the

“BANK +” and “BANK –” buttons. You can also reset the primary switch

to detect newly added secondary KVM Switches. If the KVM Switches

still do not enumerate correctly, check that all KVM Switches have the

correct BANK address assigned to them and that all daisy-chain cables are

connected properly.

4. Verify that the SMB KVM-over-IP Switch has detected all secondary

KVM Switches by scrolling through the BANKs using the “BANK +” and

“BANK –” buttons. If all secondary KVM Switches are detected properly,

the LED display on the primary KVM Switch will register and display the

BANK address of the attached secondary KVM Switch.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

Step 1 Identifying the IP Address

Once your Switch has been connected to your network and is powered up,

a Dynamic Host Configuration Protocol (DHCP) server on your network will

automatically assign the Switch an IP address, gateway address, and

subnet mask.

To identify the IP address on your network, use the MAC address or unique

device number located on the back of the Switch. If no DHCP server is

found on your network, the Switch will boot with the following static IP

address: 192.168.2.155.

If you want to connect more than one Switch to the same network and there is

no DHCP server available, connect each Switch to your network one at a time

and change the static IP address of each unit before connecting the next unit.

Note: If a DHCP server later becomes available on your network, the

Switch will take a new IP address from the DHCP server. To keep the

original static IP address, you will need to disable DHCP (see page 32).

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

Step 2 Logging into the Web Interface

To log into the web interface:

1. Open your web browser (Internet Explorer version 6.0 or above

is required).

2. Type in the Switch’s IP address in the address field, using this format:

https://192.168.2.155/config. The login page will appear (see Fig. 1).

Bookmark the page for easy reference.

Note: HTTPS is used for communication over an encrypted secure socket

layer (SSL) mechanism.

Fig. 1 Login Page

3. Type in the following default user name and password (case-sensitive):

User

Password

admin

SMBremote

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

4. Click

. The web interface will open at the Network-Configuration

page (see Fig. 2).

Fig. 2 Network-Configuration Page

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

Step 3 Network Configuration

When first connecting to the Switch’s HTTPS configuration page, two browser

security warnings may appear. Click “Yes” on both warnings.

Note: The first security warning only occurs once per client machine. This is

when the Belkin root certificate is installed. The second warning can be avoided

by adding a line to your Windows “hosts” file (typically at \winnt\system32\

drivers\etc\hosts—edit using Notepad). The line format should be “IP address

any name.kvm.net”. (For example: 192.168.2.155BelkinSMB.kvm.net.)

Device Name

Type in a name you would like to assign the Switch. The default device name

consists of the letter “D” followed by the 7-digit device number located on the

back of the Switch.

First TCP Port

Choose three consecutive Transmission Control Protocol (TCP) ports, and type in

the first port number of the series. The default port is port 900. This is suitable for

the majority of installations.

Note: Your firewall or router security access list must enable inbound

communication through the selected TCP ports for the Switch’s address.

Ports 80 and 443 are used for standard Web communication and should be

open. For client-computer access from a secured LAN, the selected ports

should be open for outbound communication.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

Enable DHCP

When this box is checked (default setting), a DHCP server on your network is

enabled to assign an IP address to the Switch. When this box is not checked

(recommended), you can assign a static IP address to the Switch.

Set a Static IP

If you choose not to use DHCP, uncheck the “Enable DHCP” box, then enter

the IP address, subnet mask, and default gateway for LAN, as provided by your

network administrator.

Note: If you enter a static IP address without unchecking the “Enable DHCP”

box, the static IP address will not work and DHCP will remain enabled.

Note: Where you have access to the server, your configured (or default) Switch

device name will appear on the DHCP server’s list, making it easy to locate.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

Step 4 User Settings

In the User-Profile page, you can create and edit up to 25 different user

accounts. To open the page, click “User Settings” under “Administration”

in the far-left menu (see Fig. 3).

Fig. 3 User-Profile Page

There are three levels of user access:

Administrator

An administrator has unrestricted access to all windows and settings and can

“take over” any active session (see page 43 for more details). An administrator

can change the name and password of all users.

User

A user can access and control target servers, but cannot use or have access to

the following:

• Advanced mouse settings

• Web configuration interface (found at https://IP Address/config)

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

View Only

A “view only” user is only allowed to view the screen of the target server without

keyboard and mouse control. Only limited options appear such as switching

servers and disconnect. A View Only icon will appear on the viewer’s local mouse

pointer to indicate this status.

Note: Only one administrator can log in to the Configuration page at a time. The

Switch can support up to eight simultaneous viewers to a remote session, but

only the administrator can take control of the server.

To add a new user:

1. Click

and type in a user name and password. The password

must be at least six characters (letter or numbers) and must not include

the user name, even if other characters are added. Depending on the

security level chosen, the user name and password parameters are

different. (See page 39 for more details.)

2. Select the permission type from the Permission box.

3. Click

of users.

to save the changes. The new user will appear in the list

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

To edit a user:

1. Select the user from the list.

2. Click

. You can now change all the available parameters—user

name, permission type, and password.

3. Click to save the changes.

Note: For security, you should change the password for the default “admin”

user name.

To delete a user:

1. Select the user from the list.

2. Click

3. Click

to save the changes.

Blocking a User

An alternative to deleting a user is “blocking.” This means that the user’s name

and password remained stored, but the user is unable to access the system.

To block a user:

1. Select the user from the list.

2. Check the “Block” box.

3. Click

to save the changes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

Step 5 Switch Configuration

The Switch-Configuration page allows you to specify the KVM Switches

daisy-chained to the SMB KVM-over-IP Switch, and to name all connected

servers. To open the page, click “Switch Configuration” under “Administration” in

the far-left column (see Fig. 4).

Fig. 4 Switch-Configuration Page

Note: By default, the Switch-Configuration page assumes that all daisy-chained

KVM Switches have 16 server ports. The page shows 256 available server-name

fields, which is the maximum number of servers supported by one daisy-chain

configuration (one SMB KVM-over-IP Switch daisy-chained with 15 additional

KVM Switches).

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

To specify and name servers:

1. Click

next to the Daisy-Chain field and select the KVM-switch

configuration that best suits your configuration.

2. Click . The number of possible connected servers will appear in

the Server Name section.

3. Change the name of each connected server by highlighting the server

and typing in a new name.

4. Click

. to save the changes.

Note: You will need to change the name of every server you want to access.

Server names left as “UNUSED” cannot be accessed.

Installing new Switch-Definition Files (SDFs)

If your switch-configuration type is not listed in the Daisy-Chain drop-down list,

contact Belkin Technical Support at (800) 282-2355 to request an updated SDF

with the desired KVM-configuration list.

To install the SDF:

1. Load the file onto the client computer.

2. Click

to locate the new SDF.

3. Click “Install” to update the Switch with the new file.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

Step 6 Serial Settings

If you have a serial device connected to the Switch, such as a power distribution

unit (PDU), you must configure the serial (RS232) settings. To open the

Serial-Settings page, click “Serial Settings” under “Administration” in the

far-left menu (see Fig. 5).

Fig. 5 Serial-Settings Page

To configure your serial device:

1. Type in the name of the serial device.

2. Using the drop-down menus, select the correct baud rate, parity, and

data- and stop-bit parameters for the device.

3. Check the “Show” box. This will make the serial device appear in the list

of servers and devices that can be accessed through the quick-access

toolbar.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

Step 7 Security Settings

The Security-Settings page allows you to configure security features for the

Switch. To open the Security-Settings page, click “Settings” under “Security” in

the far-left menu (see Fig. 6).

Fig. 6 Security-Settings Page

You can configure the following security features:

Account Blocking

Specify the number of invalid login attempts allowed before the user is

locked out.

Password Policy

Choose between a standard- or high-security password policy. The table below

shows the parameters of the two options available. Check the box to enable

the high-security password policy, or leave unchecked to enable the

standard-security policy.

Standard-Security Password

High-Security Password

6 characters or more

8 characters or more; must include at

least 1 digit and 1 uppercase letter, and 1

of the following “special” characters:

!@#$%^&*()_-+={[}]”’:;?/><

Must not include the user name

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

Idle Timeout

Select the maximum time allowed for inactivity before the user is disconnected

from the remote session. Choose “No Timeout” to disable the Idle Timeout

feature. By default, the timeout inactivity period is set to 10 minutes.

SSL Certificate

You can install your company’s own SSL certificate to protect data transferred

over the Internet between your servers and remote console. To open the

SSL-Certificate page, click “SSL Certificate” under “Security” in the far-left menu

(see Fig. 7).

Fig. 7 SSL-Certificate Page

To install an SSL certificate:

1. Click

2. Click

next to the Certificate-File field to locate the *.cer file.

next to the Private-File field to locate the private-key file.

3. Type the “private key” password in the Key-Password field.

4. Click to complete and upload the files.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

Maintenance

Firmware Upgrade

You can upgrade the Switch’s firmware to take advantage of new features or

fixes as they become available. Visit www.belkin.com/support to check for

firmware updates.

To upgrade firmware:

1. Download and save the firmware file on the client computer.

2. Select “Firmware Upgrade” under “Maintenance” in the far-left menu of

the web interface. The Firmware-Upgrade page will appear (see Fig. 8).

3. Click

to locate and install the firmware file.

4. Click “Start Upgrade”.

5. Once the upgrade is complete, click “Reboot”. The unit should reboot.

After about 30 seconds, the Login page should appear.

Fig. 8 Firmware-Upgrade Page

Note: Depending on the type of firmware upgrade, the following settings

may be erased: user settings, switch-configuration settings, mouse and video

adjustments, and RS232 serial-device settings. For more information, refer to

the firmware release notes. The network settings will remain intact.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Installation

Restore Factory Settings

You can restore the Switch to its original factory settings. This restores the

original parameters, resetting all the information added by the administrators,

including: network settings, servers, switches, users, and passwords. You also

have the option to preserve network settings, as explained below.

WARNING! Once data has been reset, it cannot be retrieved.

To restore factory settings:

1. Select “Restore Factory Settings” in the far-left menu. The

Restore-Factory-Settings page will appear (see Fig. 9).

2. Check the Preserve-Network-Settings box if you would like to preserve

the network settings.

3. Click

Fig. 9 Restore-Factory-Settings Page

Logging Out

To exit the Configuration page and close the session, click

Only one administrator can log into the Configuration area at a time. An idle

timeout of 30 minutes terminates the session.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Starting a Remote Session

To start a remote session:

1. At a client computer, open Internet Explorer (version 6.0 or above) and

type the Switch’s IP address (https:// IP address).

2. When the Login screen appears, type in your user name and password,

and click

. By default, the user name is “admin” and the password

is “SMBremote” (both are case-sensitive).

3. If it is your first time connecting, you will be prompted to install the

Belkin certificate and the Microsoft ActiveX control. You must have

administrator privileges on your client computer to install the ActiveX

control.

4. The screen of the currently selected server on the Switch will appear.

The quick-access toolbar will also appear on the right side of the screen.

5. If the target server is currently being accessed by another user, a dialog

box will appear, giving you the option to “Take Over”, “View Only”, or

“Cancel” (see Fig. 10). Select one of these options. An administrator

has the option to take control over any server. A user only has this

option when the current session is run by another user, but not by an

administrator. The dialog box will not appear for a “view only” user.

Fig. 10 Server-Access Dialog Box

Note: Use the Go local button located in at the rear of the switch to end a

current Remote session and take over the KVM locally.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Full-Screen Mode

You can work on the target server in full-screen mode, just as if you were

connected to the server locally.

To work in full-screen mode:

1. Ensure that the client computer has the same screen resolution as the

target server.

2. Press “F11”. The Internet Explorer window will disappear, leaving the

Internet Explorer menu bar at the top.

3. Right-click the Internet Explorer menu bar and check “Auto-Hide”.

The Internet Explorer menu bar will disappear and you will be in

full-screen mode (see Fig. 11).

4. To exit full-screen mode, press “F11”, or move your cursor to the

top of the window to display the Internet Explorer toolbar and click the

“Restore” button.

Fig. 11 Example of Full-Screen Mode

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Using the Quick-Access Toolbar

The quick-access toolbar provides an easy method for changing settings and

switching servers (see Fig. 12).

Fig. 12 Quick-Access Toolbar

Icon Function

Minimize or maximize the toolbar

Disconnect the remote session

Configure the mouse and change settings

Configure the keyboard and change settings

Adjust the video settings

Adjust the bandwidth settings

Moving or Hiding the Quick-Access Toolbar

The quick-access toolbar can be dragged and placed anywhere on the browser’s

screen. To hide the toolbar, double-click

repeat the same action. To minimize or maximize the toolbar, click

Disconnecting the Remote Session

To disconnect the session, click . You may close the browser after

you disconnect.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Mouse Configuration and Settings

Mouse-Pointer Alignment

When working remotely at the client computer, two mouse pointers will appear:

one for the client computer and one for the target server. The client computer’s

mouse pointer will appear on top of the target server’s. The mouse pointers

should be synchronized (aligned). If they are not synchronized, follow the

instructions below.

To align mouse pointers:

1. In the quick-access toolbar, click

2. Select “Align” or press “Ctrl+M”.

Mouse-Pointer Calibration

A target server may have a different mouse-pointer speed than the client

computer. Calibration automatically discovers the mouse speed of the target

server and aligns the two pointers. When you calibrate pointers, the Switch

saves the alignment, so calibration is only needed once per target server.

To calibrate mouse pointers (for servers running on Windows NT

or 2000):

1. In the quick-access toolbar, click

2. Select “Calibrate”.

Note: If the video-noise level is above zero, calibration may not work properly.

Go to “Video Adjustment” and try to eliminate the noise by pressing “Audio

Video Adjust”, or by adjusting the bars in “Manual Video Adjust”, then perform

the mouse calibration again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Manual Settings

You must manually synchronize the mouse pointers if:

• the mouse setting on the target server was ever changed, or

• the operating system on the target server is Windows XP,

Windows 2003 Server, Linux, Novell , SCO UNIX, or Sun Solaris

To manually synchronize mouse pointers:

1. In the quick-access toolbar, click

2. Select “Manual Settings”. The Mouse-Settings box will appear

(see Fig. 13).

Fig. 13 Mouse-Settings Box

3. Select the target server’s operating system and click “OK”. Instructions

and sliders will appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

4. Follow the instructions and set any relevant sliders to the same values

as set in the target server’s mouse properties.

Examples: For servers running on Windows XP, go to the Mouse settings

in the Control Panel and uncheck “Enhance pointer precision” (see Fig. 14).

Fig. 14 Mouse-Pointer Options (Windows XP)

For servers running on Windows NT, if mouse properties were

ever changed—even if they were returned to their original

state—uncheck “Default”.

5. Click “OK”. The mouse pointers should now be synchronized.

USB Option

In the Mouse Settings screen, you will need to select the USB option if:

• a USB Server Interface Module is connected to the target server, or

• the server’s operating system is Linux, Sun Solaris, or Novell.

If not set correctly, the mouse will frequently lose the synchronization. Some

uncommon operating systems may require this USB setting to be on for

proper mouse synchronization. Use this option if you are sure of the custom

acceleration algorithm you are using, or if you have been informed to do so by

Belkin Technical Support.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Advanced-Mouse Emulation

In the Advanced-Mouse settings, you can set the type of mouse you would like

the Switch to emulate.

Note: Belkin recommends that you NOT change the advanced settings unless

there is erratic mouse behavior (i.e., if the mouse is making random clicks and

jumping arbitrarily around the screen).

To change the mouse-emulation settings:

1. Click

. The Mouse-Emulation box will appear (see Fig. 15).

Fig. 15 Mouse-Emulation Box

2. Select the type of mouse physically connected to the local console port

on the Switch.

3. In the Max Rate box, choose the maximum mouse-report rate. For Sun

Solaris systems, the default rate is 20 in order to support older Sun

versions.

4. Click “OK”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Keyboard Configuration and Settings

You can define and transmit a keyboard sequence directly to the target server,

without affecting the client computer.

To transmit a keyboard sequence:

1. In the quick-access toolbar, click

2. Select a key sequence to transmit to the target server.

For example, if you select the “Ctrl-Alt-Del” keyboard sequence for the target

server, it will allow you to initiate the server’s shutdown/login process from your

client computer.

To add a keyboard sequence:

1. In the quick-access toolbar, click

2. Click “Add/Remove”. The Special-Key-Manager box will appear

(see Fig. 16).

Fig. 16 Special-Key-Manager Box

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

3. Click “Add Predefined”. A list of sequences will appear.

4. Select the desired sequence and click “OK”. The sequence will appear

in the Special-Key-Manager box.

5. Click “OK”. The sequence will now appear in the

Keyboard-Key-Sequence list.

To record a keyboard sequence:

1. In the quick-access toolbar, click

2. Click “Add/Remove”. The Special-Key-Manager box will appear.

3. Click “Record New”. The Add-Special-Key box will appear (see Fig. 17).

4. Assign a name to the key sequence in the Label box.

5. Click “Start Recording”.

6. Press the desired keys. The keys will appear in the box.

7. Click “Stop Recording”.

8. Click “OK” to complete and save the sequence.

Fig. 17 Add-Special-Key Box

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Video Configuration and Settings

Refresh

You may need to refresh the video image when changing the display attributes of

a target server.

To refresh the video settings:

1. In the quick-access toolbar, click

2. Select “Refresh” or press “Crl+R”.

Manual Video Adjust

You may want to manually adjust video to fine-tune the target-server video

settings, to adapt to a noisy environment or a non-standard VGA signal, or when

using a full-screen DOS/CLI mode.

To adjust the video manually:

1. In the quick-access toolbar, click

2. Select “Manual video adjust”. A slider bar will appear (see Fig. 18). A

red frame will also appear around the screen. This represents the screen

area according to the server’s screen resolution.

3. Move the sliders to adjust and change the displayed image. Click in the

area of the sliders for fine-tuning.

• Brightness/Contrast adjusts the brightness and contrast of the

displayed image

• Horizontal Offset defines the starting position of each line on the

displayed image

• Vertical Offset—defines the vertical starting position of the

display image

• Phase—defines the point at which each pixel is sampled

• Noise Level—represents the video noise when a static screen

is displayed

• Automated Adjust—when this box is checked, the video adjusts

automatically whenever there is a change in the screen resolution.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Fig. 18 Manual Video-Adjust Bar

Auto Video Adjust

To adjust the video automatically:

1. Open Internet Explorer (or similar) in the background.

2. In the quick-access toolbar, click

3. Select “Auto video adjust”.

The process will take a few seconds. If the process runs for more than three

seconds, there may be an abnormal noise level. Check the video cable and verify

that no dynamic-video application is running on the target server’s desktop.

Perform this procedure where necessary for each target server or new

screen resolution.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Performance Settings (Bandwidth)

You can adjust the bandwidth settings on the Switch to give you the desired

compression and color-support levels for your remote sessions.

To change the bandwidth settings:

1. In the quick-access toolbar, click on

. The Performance-Settings box

will appear (see Fig. 19).

Fig. 19 Performance-Settings Box

2. Select one of the following bandwidth options:

• Adaptive—Automatically adapts to the best compression and colors

based on activity.

• Low—Provides high compression and 16-color support.

• Medium—Provides medium compression and 256-color support.

Medium is recommended when accessing the Switch over an

Internet connection.

• High—Provides low compression and high, 16-bit color support. This

setting provides optimal performance when working on a LAN.

• Custom—Allows you to select your own compression and

color-support levels. Choose between Low, Medium, and High

compression, and 16-, 256-, and High (16-bit) color support.

3. When finished, click “OK” to save the setting. The screen of the last

accessed target server will appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Selecting a Server

The quick-access toolbar allows you to easily select and switch to any server

connected to the Switch or daisy-chain configuration.

To connect to a different server:

1. In the quick-access toolbar, click

or right-click

. A list

of connected servers will appear (see Fig. 20). If a serial device is

connected to the Switch, it will also appear on the list.

2. Select the desired server or serial device. The screen of the server or the

serial-device window will appear.

Fig. 20 Server-Selection Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Additional Features

When you right-click

in the quick-access toolbar, a menu will appear.

From this menu you can access your connected servers. The menu also

provides the following features:

• Disconnect—Disconnects the remote session.

• About—Verifies the current version of software/firmware of your Switch.

• Local Settings—Opens the Client-Configuration box.

• Pointer Type—Lets you change the client-computer mouse pointer to

appear as a dot, or to not appear at all.

• Hide Toolbar—Hides the quick-access toolbar starting with the next

remote session. To toggle the toolbar on and off, press “F9”.

• Full-Screen Mode—Makes the screen appear in full-screen mode

starting with the next remote session. To toggle the full-screen mode on

and off, press “F11”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Remote Console

Restoring Factory Defaults

The “Restore Factory Settings” section on page 42 explains how to restore

factory settings from the web interface. When you cannot access the system

(you have forgotten the user name, IP address, or password), you can restore

factory defaults from the Switch.

To restore factory defaults:

1. Press and hold down the “Go-Local” button on the back of the Switch

for five seconds while powering up the Switch. The Switch will boot

up in safe mode.

2. Wait 30 seconds for the Switch to reboot.

3. Log in with the default IP address of the unit:

http://192.168.2.155/config

The blank login screen will appear (no background picture).

Note: Do not start the IP address with https

Note: The IP address is only valid if DHCP is turned off and that is the

static address. If the IP is set to DHCP or a different Static IP address, a

different address than 192.168.2.155 will need to be used.

4. Type in the following default user name and password (case-

sensitive), and click “Login”. This user name and password only work

immediately after the reset procedure described above.

Safe-Mode User Safe-Mode Password

admin

SAFEmode

5. From the menu, select “Restore Factory Settings”. A warning will

appear advising you that all device data will be erased.

6. Check the box if you would like to preserve network settings.

7. Click “Restore”. The factory defaults will be restored. When the

process finishes, you will be prompted to reboot.

8. Click “Reboot” to restart the Switch.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Local Console

Now that you have connected your console and servers to the Switch,

it is ready for use. You can select connected servers by using either the

front-panel port selectors, the On-Screen Display (OSD), or hot-key commands

through the console keyboard. It takes approximately 1–2 seconds for the video

signal to refresh after switching servers. Re-synchronization of the mouse and

keyboard signals also occurs. This is normal operation and ensures that proper

synchronization is established between the console and the connected servers.

Selecting a Server or BANK

Selecting a Server or BANK Using Hot Keys

Switch to the next or previous port with simple keyboard hot-key sequences

using the Scroll Lock key and either the up or down arrow keys. To send

commands to the Switch, the Scroll Lock key must be pressed twice within two

seconds. The Switch will beep, confirming that it is in hot-key mode. Next, press

the up arrow key and the Switch will switch to the next port. Press the down

arrow key to switch to the previous port.

Switch to previous active port,

“Down” arrow

Switch to next active port, “Up” arrow.

With a single-switch configuration (no daisy-chained KVM switches), you can

switch directly to any port by entering the 2-digit number of the port you wish to

access. For example, if you press “Scroll Lock”, “Scroll Lock”, “02”, the Switch

will switch to the server on port 2 located on BANK 00.

Switch to BANK 00, Port 2 (02)

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Local Console

With a daisy-chain switch configuration, you can switch between BANKs (KVM

switches) by pressing “Scroll Lock”, “Scroll Lock”, “Page Up”, to switch to the

previous BANK. Press “Scroll Lock”, “Scroll Lock”, “Page Down”, to switch to

the next BANK.

With a daisy-chain switch configuration, you can switch directly to any port on

any BANK by pressing “Scroll Lock”, “Scroll Lock”, BANK address, and the port

number. For example, if you press “Scroll Lock”, “Scroll Lock”, “03”, “05”, the

server on BANK 03, port 5 will become active.

Note: You will have approximately five seconds to complete each

hot-key sequence.

See page 65 for instructions on how to change the hot-key-initiator key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Local Console

Selecting a Server Using Port Selectors

You can directly select which server you wish to control by pressing the port

selector next to the corresponding port. The LED will illuminate to indicate

the port is currently selected. If you are installing multiple KVM Switches that

are daisy-chained, use the BANK scroll keys located on the front panel of

the primary KVM Switch to access other servers that are connected to the

secondary KVM Switches.

Selecting a BANK Using Scroll Buttons

Pressing the “BANK +” and “BANK –” scroll buttons on the primary KVM Switch

will allow you to switch between the daisy-chained Switches. Pressing both

buttons simultaneously will reset the Switch.

The “BANK +” button will take you to the next BANK. For example, when you

are at the primary switch (BANK 00) and want to check servers on BANK 02,

pressing the “BANK +” button will take you to BANK 02. As a default, the first

active server will be displayed on the console monitor. Use the port selectors to

go to the desired server on BANK 02.

The “BANK –” button will take you to the previous BANK (for example, when you

are at BANK 02 and want to check servers in BANK 01). Pressing the “BANK

–” button will take you to BANK 01. As a default, the first active server will be

displayed on the console monitor. Use the port selectors to go to the desired

server on BANK 01.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Local Console

AutoScan Mode

The AutoScan feature allows you to set your Switch to scan and monitor the

activities of all connected servers one by one. The Switch remains on one server

for a preset number of seconds, before switching to the next server. The time

interval allotted for each server can be defined or adjusted through the OSD

menu (see the “Scan Time” section).

When the Switch is in AutoScan mode, it is also in view-only mode. This means

that input from the console (keyboard and mouse) will not be transmitted to the

server in focus. Cancel AutoScan to regain control of the server.

To activate the AutoScan function, press the “AutoScan” button on the Switch.

You can also activate AutoScan on your keyboard by pressing “Scroll Lock”,

“Scroll Lock”, space bar, “F4”.

To disable AutoScan, press any button on the front panel or any key on

the keyboard.

Note: There is no mouse or keyboard control in AutoScan mode. This is

necessary to prevent data and synchronization errors. If the user is using the

mouse or keyboard when the Switch is switching between ports, data flow may

become interrupted and could result in erratic mouse movement and/or wrong-

character input when using the keyboard.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Local Console

On-Screen Display (OSD)

The OSD allows you to switch servers, assign names to your servers, enable and

disable the AutoScan feature, set the desired scan-time interval for AutoScan,

enable the password security feature, and program hot keys. To access the OSD

menu, press “Scroll Lock”, “Scroll Lock”, and the space bar. Immediately, the

OSD overlay screen will appear. The superimposed menu screen is generated by

the Switch, and does not affect the function of your server, operating system, or

software function.

Note: The local OSD should only be used on the local console. It is not intended

for remote access operation.

Main OSD-Menu Page

The main OSD menu displays the current selected BANK and connected servers

to that BANK. If you have only one Switch in your configuration, the OSD menu

will display “BANK 00”. A “✹” symbol indicates that the connected server is

powered up. If the OSD menu does not display a “✹” symbol for a server that is

connected and powered up, you will need to reset the Switch to re-detect the

server. This is done by simultaneously pressing the “BANK +” and “BANK –”

buttons on the front panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Local Console

OSD-Menu Keyboard Commands

Command

Function

Navigate to different servers in the same BANK

↑↓

Page Up/Page Down Select next or previous BANK

Insert

Enter

Tab

Highlight server name for editing

Switch servers

Open the Function/Help page

Exit the OSD

Esc

To switch servers using the main OSD menu, use the arrow keys on your

keyboard to navigate to the desired server and press the “ENTER” key.

A “

←

” symbol indicates which server is currently being accessed on

your console.

To change the name of a server, use the arrow keys to navigate to the desired

server, press the “Insert” key, type in the new name, and press “ENTER” to save

the entry. You may use up to 15 characters for each server name.

Function/Help Page

The Function/Help page allows you to set the time intervals for the AutoScan

feature and OSD display time, enable the password security feature, and program

hot keys.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Local Console

Function/Help-Page Keyboard Commands

Command

Function

Initiate AutoScan

Navigate to the next field

Highlight field for editing

Return to the main OSD menu

↑↓

Insert

Esc

Program Monitor-DDC2 settings to all Server

Interface Modules

F10

Space

Scan

Change options for selected field

This specifies whether the AutoScan feature is enabled or not. To enable or

disable the AutoScan feature, use the arrow keys to navigate to the Scan field

and press the space bar.

Scan Time

This specifies the amount of time the Switch remains on a server before switching

to the next server while in AutoScan mode. You may set the scan-time interval

to anywhere between 1 and 99 seconds. To change the scan time, use the arrow

keys to navigate to the Scan Time field, and type in the desired time interval

(in seconds).

Security

This feature allows you to enable an administrator password to prevent

unauthorized users from accessing the OSD. To enable or disable the Security

feature, use the arrow keys to navigate to the Security field and press the

space bar.

Note: It is recommended that you do not enable local security if you will be

accessing the remote session often.

Admin Password

This allows you to specify the administrator password needed to access the OSD

when the Security feature is enabled. To set the password, use the arrow keys to

navigate to the Admin-Password field and type in the desired password. You may

use up to eight uppercase characters for the password. Password characters are

not case-sensitive. Press “Esc” or use the arrow keys to navigate to fields and

save the password. Use the “Back Space” key to erase the password.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Local Console

Hot Key

This allows you to select which key will be used to initiate hot-key commands.

You have four options to choose from: “Scroll Lock”, “Print Screen”, “Ctrl”,

and “F12”. The default key for all hot-key commands is “Scroll Lock” (see

“Hot-Key-Command Shortcuts” on next page). To designate a different key

to initiate hot-key commands, use the arrow keys to navigate to the Hot-Key

field, press the space bar until the preferred key is found, and press “Enter” to

save the entry.

Note: If you change the Hot Key to something different than SCROLL LOCK,

you must load a new Switch Definition File for that hot key. See page 37.

Timeout

This specifies the amount of time that can elapse before the administrator

will be locked out of the KVM Switch (and connected servers) due to user

inactivity. To regain access to the KVM Switch after timeout, simply reenter

the admin password in the login box. The Timeout feature is only available if

the Security feature is enabled. You may set the time intervals to anywhere

between 1 and 99 minutes. To change the time interval, use the arrow keys to

navigate, type the desired time interval, and press “Enter” to save the entry.

If you disable the Security feature, the Timeout feature will be turned

off automatically.

Note: If there are secondary KVM Switches connected, and the AutoScan

time and timeout settings are set on the primary KVM Switch, the settings will

also apply to all secondary KVM Switches.

Monitor-DDC2 Feature

This feature allows the console monitor to send information to the server’s

video card about its properties, such as maximum resolution and color depth

supported. The video card will then adjust the monitor’s settings accordingly.

This enables your monitor to use its optimal settings for every server

connected to your Switch. To read the DDC2 information from the monitor and

program it to all connected Server Interface Modules, press “F10”. Every time

you change the monitor, you will need to press “F10” again to program the

new DDC information to the Server Interface Modules.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Local Console

Hot-Key-Command Shortcuts

Below is a complete list of hot-key commands that can be used for your Switch:

Command

Function

Switch to PREVIOUS ACTIVE port

Switch to NEXT ACTIVE port

Scroll Lock, Scroll Lock, ↑

Scroll Lock, Scroll Lock ↓

Scroll Lock, Scroll Lock,

Page Up

Switch to PREVIOUS BANK (By default,

selects first active port on the BANK)

Scroll Lock, Scroll Lock,

Page Down

Switch to NEXT BANK (By default, selects first

active port on the BANK)

Directly switches to PORT Y on BANK 00

(single-switch configuration) (Y=01 to 16)

Scroll Lock, Scroll Lock, Y

Directly switches to PORT Y on BANK X

(daisy-chain configuration) (X=00 to 15),

(Y=01 to 16)

Scroll Lock, Scroll Lock,

Y, X

Scroll Lock, Scroll Lock,

Space Bar, F10

Monitor DDC2 (identifies monitor settings)

Activate OSD

Scroll Lock, Scroll Lock,

Space Bar

Enable AutoScan mode (refer to AutoScan

button)

Scroll Lock, Scroll Lock, F4

Note: You will have approximately five seconds to complete each

hot-key sequence.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Local Console

Sun Combo Keys

The PS/2 keyboard connected to the Switch does not support the Sun keypad

to perform special functions in the Sun-operating-system environment. When

a USB or Sun Server Interface Module is connected to a Sun server, the Server

Interface Module emulates the Sun keys using a set of key combinations called

Combo keys. Please refer to the table below.

Sun Key

Stop

Combo Key

Left Ctrl + Alt + F1

Left Ctrl + Alt + F3

Left Ctrl + Alt + F5

Left Ctrl + Alt +F7

Props

Front

Open

Find

Left Ctrl +Alt + F9

Again

Left Ctrl + Alt + F2

Left Ctrl + Alt + F4

Left Ctrl + Alt + F6

Left Ctrl + Alt + F8

Left Ctrl + Alt + F10

Left Ctrl + Alt + F11

Application key or Left Ctrl + Alt + keypad *

Scroll Lock

Undo

Copy

Paste

Cut

Help

Compose

Crescent

Volume Up

Volume Down

Mute

Left Ctrl + Alt + keypad –

Left Ctrl + Alt + keypad +

Left Ctrl + Alt + F12

Left Windows key

Sun Left ◊ Key

Sun Right ◊ Key

Alt-Graph

Stop A

Right Windows key

Right Alt or Alt + Gr

Left Ctrl + Alt + 1

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Switch from a Local Console

Updating Firmware

The Switch features flash-upgradeable firmware to ensure compatibility with the

latest devices and servers. Firmware upgrades are free for the life of your Switch.

To update your firmware, download the appropriate firmware file and utility

from www.belkin.com/support/. The utility will guide you through the process

of updating the firmware on your Switch.

Warning: We strongly recommend that you update your firmware only if you are

experiencing mouse and keyboard problems with your Switch, as reconfiguring

software may lead to unexpected operational problems. Please contact Belkin

Technical Support if you need assistance.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently Asked Questions

What operating systems does the Switch support?

The Switch will support operating systems that run on a PS/2 or USB platform.

Operating systems include, but are not limited to, DOS; Windows 2000, NT,

XP, 2003 Server; Sun; Solaris; Novell; and Linux.

Does the Switch support Microsoft IntelliMouse ?

The Switch supports mice from Microsoft, Logitech , Kensington , etc., and

Belkin. Please contact Belkin Technical Support for compatibility issues you

may experience.

How does the Switch allow the user to switch

between ports?

The Switch supports three methods of port selection. The user can select

servers using specially designated keyboard hot keys, through the On-Screen

Display (OSD), or can independently access the desired port by pushing the

direct-access port selectors.

How far can the server be from the Switch?

The Switch can be placed up to 100 feet (30m) away from

your server.

What is the maximum video resolution that the

Switch supports?

The advanced video circuit in the Switch supports a

maximum resolution of up to 1600x1200 @ 75Hz. Increasing

the cable length from your Switch to your servers will result in

lower resolution support.

Do I have to install any software to use the Switch?

No, the Switch does not require any drivers or software to be installed in your

servers. Simply connect all your servers to the Switch using Server Interface

Modules, and then attach one keyboard, monitor, and mouse to the console

port, and it is ready for use.

Can I use the Switch on my Sun server that supports USB?

Yes, the Switch works with any USB-capable server.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently Asked Questions

Does the Switch support Linux?

Yes, the Switch works with Red Hat and other Linux distributions configured

for PS/2 or USB support.

What communication ports does the Switch use so it can

be accessed remotely?

Five ports have to be open to remotely connect to the Switch. Ports 80 and

443 are used for standard web communication. Three consecutive ports are

used to send the remote video. These can be user-defined. By default, ports

900, 901, and 902 are used.

What are the supported video resolutions and

refresh rates?

→

56 60 65 66 70 72 73 75 76 85 86

640x480

720x400

800x600

1024x768

1152x864

1152x900

1280x720

1280x768

1280x960

1280x1024

1600x1200

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Local Console

General

Problem:

My server does not boot when connected to the Switch but works fine when

I connect the keyboard, video, and mouse directly to the server.

Solution:

• Make sure that the keyboard and mouse cables are connected tightly between

the Server Interface Module and the server.

• Check that the keyboard and mouse cables are not crossed.

• Check the CAT5 cable connection.

Video

Problem:

I am getting ghosting, shadowing, or fuzzy images on my local monitor.

Solution:

• Check that all video cables are inserted properly to the Server

Interface Module.

• Check that the monitor you are using supports the resolution and

refresh-rate setting on your server.

• Lower the video resolution of your monitor.

• Check that the cable length does not exceed 100 feet (30m).

• Check that the graphics card you are using supports the resolution and

refresh-rate setting on your server.

• Connect the monitor directly into the server with which you are having trouble

to see if the problem still appears.

Problem:

I am getting a black screen on my local monitor.

Solution:

• Check that all video cables are inserted properly.

• Check that the keyboard cable is connected and inserted properly between

the server and the Server Interface Module for the appropriate port.

• Connect your monitor directly to the server to verify that your monitor is

functioning properly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Keyboard

Problem:

The server does not detect a keyboard and I get a keyboard error reported

at boot up.

Solution:

• Check that the keyboard cable on the Server Interface Module is completely

connected to your server. Tighten any loose connections.

• If you are using the keyboard software that was included with your keyboard,

uninstall it and then reinstall the standard Microsof keyboard driver.

Mouse

Problem:

The mouse is lost when I switch to a different port.

Solution:

• Check that the mouse you are using is connected properly to the console port

of the Switch.

• Check that the mouse cable on the Server Interface Module is completely

connected to your server. Tighten any loose connections.

• If you are using a mouse driver that was included with your mouse, uninstall it

and install the standard Microsoft mouse driver.

• Make sure the mouse works when directly plugged into the server.

• If the server is coming out of standby mode, allow up to one minute to regain

mouse function.

• Deactivate power-management schemes on the PC with which you are

experiencing problems.

• Try a different mouse.

Problem:

The server boots up, but the mouse does not work.

Solution:

• Make sure the mouse is plugged in properly.

• Make sure the mouse works when directly plugged into the server. Rebooting

may be necessary when trying this.

• Try a different mouse.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Problem:

When I switch from one port to another, mouse movement is

completely erratic.

Solution:

• Make sure you do not have more than one mouse driver installed. Make

sure that the driver is either for a standard PS/2 mouse or a Microsoft

server-compatible PS/2 mouse.

• Make sure you do not have any mouse drivers loaded in your ConfigureSYS

or AUTOEXEC.BAT files.

• Avoid moving the mouse or pressing the mouse button when switching ports

on the Switch.

• Stop moving the mouse, wait for five seconds, and then move the

mouse again. The Server Interface Module will synchronize the mouse

movement automatically.

USB

Problem:

I am connecting the USB Server Interface Module to my USB server and

my keyboard and mouse do not work.

Solution:

• Prior to connecting the USB Server Interface Module, make sure that the HID

USB driver is installed on each server. (To install the HID USB driver, connect

a USB mouse and USB keyboard to the server. A Windows operating system

should automatically install the drivers.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Remote Console

Problem:

The Remote console login page will not display on my browser.

Solution:

• Verify that you are using Microsoft Internet Explorer 6.0 or higher.

• Verify that the ActiveX plug-in is installed and enabled for the web browser.

• A firewall may prevent access to the remote console. Verify that default ports

900, 901, and 902 for both HTTP and HTTPS are open. If you have selected

your own ports, verify that the three consecutive ports are open based on the

first port number you selected.

Problem:

The video quality is bad and/or grainy.

Solution:

• Use the quick-access toolbar to refresh the video screen.

• Select “Automated Adjust” under Manual video settings. Refer to page 52.

Problem:

I forgot my password. How can I reset the RIPM to factory defaults?

Solution:

• Refer to the “Restoring Factory Defaults” section on page 57.

Problem:

I changed the LAN settings to a static IP address, but I cannot get into the

web interface through the new IP address.

Solution:

• Make sure you uncheck the “Enable DHCP” box.

• Check whether the computer you are using to access the web interface has

an IP address in the same domain as the new IP address to which you set

your Switch.

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

The following definitions are used throughout this User Manual.

AutoScan: A mode of operation where the KVM switch scans from one port

to another, on an ongoing basis, as configured by the user.

BANK: The address of a daisy-chained KVM switch (00–15), set by the

DIP switch.

Client Computer: The computer being used to access the Switch remotely over

a TCP/IP connection.

Console: The all-in-one term for the keyboard, video monitor, and mouse

connected to a KVM switch.

Console Port: Receptors for the console to connect to the KVM switch.

Control: When discussing switching between ports, control means that the

console is capable of sending input to the server. Control requires that the

console also has focus on the port, and is viewing it.

DDC: Short for Display Data Channel, a VESA standard for communication

between a monitor and a video adapter. Using DDC, a monitor can inform a

computer’s video card about its properties, such as maximum resolution and

color depth, to ensure that the user is presented with valid options for

configuring the display.

DHCP: Dynamic Host Configuration Protocol. An Internet protocol that allows

nodes to dynamically acquire (“lease”) network addresses for periods of

time rather than having to pre-configure them. DHCP greatly simplifies the

administration of large networks, and networks in which nodes frequently join

and depart.

Daisy-Chain: A configuration of multiple KVM switches that are connected one

to another in a series. A KVM-switch daisy-chain uses common settings to allow

seamless, complex interactions between multiple consoles for control over

many servers.

HID: Human Interface Device, the USB-device class that includes keyboards

and mice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

KVM: Literally “Keyboard Video Mouse”, this term refers to technology

that allows two or more computers to be controlled by one keyboard,

video monitor, and mouse; some switches that use KVM technology

enable sharing of other peripherals such as audio speakers, microphones,

and printers.

KVM Switch: A device that allows a user to access and control multiple servers

from a single console. It has at least one console port and multiple server ports.

MAC: Media Access Control. In computer networking, a MAC address is a

unique identifier attached to most forms of networking equipment.

OSD: On-Screen Display, a graphical user interface that can be used to control

and configure the KVM switch.

Port: An interface receptor on a server through which you can attach a device or

plug in a device cable.

Primary KVM Switch: The switch that is connected to the console and is set to

BANK address 00.

SSL: Secure Sockets Layer. Cryptographic protocols that provide secure

communications on the Internet for such things as email and Internet banking.

Secondary KVM Switch: Any KVM switch that is daisy-chained to the primary

KVM switch and is set to BANK address 01–15 (and has no console connected).

TCP/IP: Transmission Control Protocol/Internet Protocol. Shorthand for the suite

of rules defining the format devices use to communicate over the Internet.

Target Server: The server currently being accessed and controlled by the user

from a local or remote console.

Download from Www.Somanuals.com. All Manuals Search And Download.

Information

FCC Statement

Declaration of Conformity with FCC Rules

for Electromagnetic Compatibility

We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our

sole responsibility that the products:

F1DP108G, F1DP116G,

to which this declaration relates:

Comply with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

CE Declaration of Conformity

We, Belkin Corporation, declare under our sole responsibility that the products

F1DP108G, and F1DP116G, to which this declaration relates, are in conformity

with Emissions Standard EN55022 and with Immunity Standard EN55024, LVP

EN61000-3-2, and EN61000-3-3.

ICES

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme á la norme NMB-003 du Canada.

Belkin Corporation Limited 3-Year Product Warranty

What this warranty covers.

Belkin Corporation warrants to the original purchaser of this Belkin

product that the product shall be free of defects in design, assembly,

material, or workmanship.

What the period of coverage is.

Belkin Corporation warrants the Belkin product for three years.

What will we do to correct problems?

Product Warranty.

Belkin will repair or replace, at its option, any defective product free of charge

(except for shipping charges for the product).

What is not covered by this warranty?

All above warranties are null and void if the Belkin product is not provided to

Belkin Corporation for inspection upon Belkin’s request at the sole expense

of the purchaser, or if Belkin Corporation determines that the Belkin product

has been improperly installed, altered in any way, or tampered with. The

Belkin Product Warranty does not protect against acts of God (other than

lightning) such as flood, earthquake, war, vandalism, theft, normal-use wear

and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage

disturbances (i.e. brownouts or sags), non-authorized program, or system

equipment modification or alteration.

Download from Www.Somanuals.com. All Manuals Search And Download.

Information

How to get service.

To get service for your Belkin product you must take the following steps:

1. Contact Belkin Corporation at 501 W. Walnut St., Compton CA 90220,

Attn: Customer Service, or call (800)-223-5546, within 15 days of the

Occurrence. Be prepared to provide the following information:

a. The part number of the Belkin product.

b. Where you purchased the product.

c. When you purchased the product.

d. Copy of original receipt.

2. Your Belkin Customer Service Representative will then instruct you on

how to forward your receipt and Belkin product and how to proceed with

your claim.

Belkin Corporation reserves the right to review the damaged Belkin product. All

costs of shipping the Belkin product to Belkin Corporation for inspection shall

be borne solely by the purchaser. If Belkin determines, in its sole discretion,

that it is impractical to ship the damaged equipment to Belkin Corporation,

Belkin may designate, in its sole discretion, an equipment repair facility to

inspect and estimate the cost to repair such equipment. The cost, if any, of

shipping the equipment to and from such repair facility and of such estimate

shall be borne solely by the purchaser. Damaged equipment must remain

available for inspection until the claim is finalized. Whenever claims are settled,

Belkin Corporation reserves the right to be subrogated under any existing

insurance policies the purchaser may have.

How state law relates to the warranty.

THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN

CORPORATION, THERE ARE NO OTHER WARRANTIES, EXPRESSED

OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED

WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY,

ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so

the above limitations may not apply to you.

IN NO EVENT SHALL BELKIN CORPORATION BE LIABLE FOR INCIDENTAL,

SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES

SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING

OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

This warranty gives you specific legal rights, and you may also have other

rights, which may vary from state to state. Some states do not allow the

exclusion or limitation of incidental, consequential, or other damages, so the

above limitations may not apply to you.

Download from Www.Somanuals.com. All Manuals Search And Download.

OmniView SMB

KVM-over-IP Switch

Belkin Ltd.

Belkin SAS

Express Business Park,

Shipton Way, Rushden NN10 6GL,

United Kingdom

130, rue de Silly

92100 Boulogne-Billancourt,

France

+44 (0) 1933 35 2000

+44 (0) 1933 31 2000 fax

+33 (0) 1 41 03 14 40

+33 (0) 1 41 31 01 72 fax

Belkin B.V.

Belkin Iberia

Boeing Avenue 333

1119 PH Schiphol-Rijk,

Netherlands

Avda. Cerro del Aguila 3

28700 San Sebastián de los Reyes,

Spain

+31 (0) 20 654 73 00

+31 (0) 20 654 73 49 fax

+34 (0) 9 16 25 80 00

+34 (0) 9 02 02 00 34 fax

Belkin GmbH

Belkin Nordic

Hanebergstrasse 2

80637 Munich,

Knarrarnäsgatan 7

164 40 Kista,

Germany

Sweden

+49 (0) 89 14 34 05 0

+49 (0) 89 14 34 05 100 fax

+46 (0) 8 5229 1870

+46 (0) 8 5229 1874 fax

Belkin Tech Support

Europe: 00 800 223 55 460

respective manufacturers listed. Mac is a trademark of Apple Computer, Inc., registered in

the U.S. and other countries. Windows, Microsoft, NT, IntelliMouse, and ActiveX are either

registered trademarks or trademarks of Microsoft Corporation in the United States and/or

other countries.

P75215ea

Download from Www.Somanuals.com. All Manuals Search And Download.

Belkin Automobile Accessories F8V7058 APL User Manual
Blue Rhino Outdoor Fireplace WAF830SP User Manual
BlueTrek Headphones SKIN User Manual
Boca Research Printer FSP 42 User Manual
Briggs Stratton Portable Generator 01933 User Manual
Cadco Food Warmer WTBS 2RT User Manual
Canon Digital Camera VB C50FSi User Manual
Casio Digital Camera VERSION 23 User Manual
CFM Fan TNC 0506 User Manual
Channel Vision Intercom System DP XXXX User Manual