Belkin Network Router PM01116EA User Manual

G+  
MIMO  
Wireless Router  
English  
Français  
DEutsch  
User Manual  
PM01116ea F5D9231-4  
nEDErlanDs  
Español  
italiano  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InTROdUCTIOn  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Thank you for purchasing the Belkin G+  
Wireless Router (the Router)� Following are two short sections—the first discusses  
MIMO  
the benefits of home networking, and the other outlines best practices that maximize your wireless home network range and  
performance� Please be sure to read through this User Manual completely, and pay special attention to the section entitled  
“Placement of your G+  
Wireless Router” on the next page� By following our simple setup instructions you will be able to use your  
MIMO  
Belkin Home Network to:  
Share one high-speed Internet connection with all the computers in  
your home  
Share a single printer with the entire family  
Share documents, music, video, and digital pictures  
Store, retrieve, and copy files from one computer to another  
Simultaneously play games online, check Internet email, and chat  
Share resources, such as files and hard drives among all the  
connected computers in your home  
advantages of a Wireless network  
Here are some of the advantages of setting up a Belkin Wireless Network:  
Mobility – you’ll no longer need a dedicated “computer room”—  
now you can work on a networked laptop or desktop computer  
anywhere within your wireless range  
Easy Expansion – the wide range of Belkin networking products let  
you expand your network to include devices such as printers and  
gaming consoles  
Easy installation – Belkin’s Setup Assistant makes setup simple  
No cabling required – you can spare the expense and hassle of  
retrofitting Ethernet cabling throughout the home or office  
Flexibility – set up and access printers, computers, and other  
networking devices from anywhere in your home  
Widespread industry acceptance – choose from a wide range of  
interoperable networking products�  
G+ MIMO Wireless Router  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
InTROdUCTIOn  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Placement of your G+  
Wireless Router  
MIMO  
Important factors for Placement and setup  
Ensure that your Router’s networking antennas are parallel to each  
other, and are positioned vertically (toward the ceiling)�  
Your wireless connection will be stronger the closer your computer is  
to your Router� Typical indoor operating range for wireless devices is  
between 100 and 200 feet�  
In multistory homes, place the Router on a floor that is as close  
to the center of the home as possible� This may mean placing the  
Router on an upper floor�  
In the same way, your wireless connection and performance will degrade  
somewhat as the distance between your Router and connected devices  
increases� This may or may not be noticeable to you� As you move  
further from your Router, connection speed may decrease� Factors that  
can weaken signals simply by getting in the way of your network’s radio  
waves are metal appliances or obstructions, and walls�  
Try not to place the Router near a cordless 2�4GHz phone�  
2� avoid Obstacles and Interference  
If you have concerns about your network’s performance that might  
be related to range or obstruction factors, try moving the computer to  
a position between five and 10 feet from the Router in order to see if  
distance is the problem� If difficulties persist even at close range, please  
contact Belkin Technical Support�  
Avoid placing your Router near devices that may emit radio “noise,”  
such as microwave ovens� Dense objects that can inhibit wireless  
communication include:  
Refrigerators  
note: While some of the items listed below can affect network  
performance, they will not prohibit your wireless network from  
functioning; if you are concerned that your network is not operating at  
its maximum effectiveness, this checklist may help�  
Washers and/or dryers  
Metal cabinets  
Large aquariums  
Metallic-based UV tinted windows  
1� Router Placement  
If your wireless signal seems weak in some spots, make sure that  
objects such as these are not blocking the signal’s path (between your  
computers and Router)�  
Place your Router, the central connection point of your network, as  
close as possible to the center of your wireless network devices�  
To achieve the best wireless network coverage for your “wireless clients”  
(i�e�, computers enabled by Belkin Wireless Notebook Network Cards,  
Wireless Desktop Network Cards, and Wireless USB Adapters):  
G+ MIMO Wireless Router  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
InTROdUCTIOn  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
3� Cordless Phones  
4� Choose the “Quietest” Channel for your Wireless network  
If the performance of your wireless network is impaired after attending  
to the above issues, and you have a cordless phone:  
In locations where homes or offices are close together, such as  
apartment buildings or office complexes, there may be wireless  
networks nearby that can conflict with yours�  
Try moving cordless phones away from your Router and your  
wireless-enabled computers�  
Use the Site Survey capabilities found in the Wireless Utility of your  
wireless adapter to locate any other wireless networks that are available  
(see your wireless adapter’s user manual), and move your Router and  
computers to a channel as far away from other networks as possible�  
Unplug and remove the battery from any cordless phone that  
operates on the 2�4GHz band (check manufacturer’s information)� If  
this fixes the problem, your phone may be interfering�  
Experiment with more than one of the available channels, in  
order to find the clearest connection and avoid interference from  
neighboring cordless phones or other wireless devices�  
If your phone supports channel selection, change the channel on  
the phone to the farthest channel from your wireless network� For  
example, change the phone to channel 1 and move your Router to  
channel 11� See your phone’s user manual for detailed instructions�  
For Belkin wireless networking products, use the detailed Site  
Survey and wireless channel information included with your  
wireless network card� See your network card’s user guide for  
more information�  
If necessary, consider switching to a 900MHz or 5GHz  
cordless phone�  
These guidelines should allow you to cover the maximum possible area  
with your Router� Should you need to cover an even wider area, we  
suggest the Belkin Wireless Range Extender/Access Point�  
G+ MIMO Wireless Router  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
InTROdUCTIOn  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
5� secure Connections, VPns, and aOl  
Secure connections can be interrupted by a computer’s power  
Secure connections typically require a user name and password, and  
are used where security is important� Secure connections include:  
management setting, which causes it to “go to sleep�” The simplest  
solution to avoid this is to simply reconnect by rerunning the VPN or  
AOL software, or by re-logging into the secure website�  
Virtual Private Network (VPN) connections, often used to connect  
remotely to an office network  
A second alternative is to change your computer’s power management  
settings so it does not go to sleep; however, this may not be appropriate  
for portable computers� To change your power management setting  
under Windows, see the “Power Options” item in the Control Panel�  
The “Bring Your Own Access” program from America Online (AOL),  
which lets you use AOL through broadband provided by another  
cable or DSL service  
If you continue to have difficulty with Secure Connections, VPNs, and  
AOL, please review the steps above to be sure you have addressed  
these issues�  
Most online banking websites  
Many commercial websites that require a user name and password  
to access your account  
G+ MIMO Wireless Router  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROdUCT OVeRVIeW  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Product features  
In minutes you will be able to share your Internet connection and network your computers� The following is a list of features that make your new Belkin  
G+ MIMO Wireless Router an ideal solution for your home or small office network�  
naT IP address sharing  
Works with both PCs and Mac® Computers  
Your Router employs Network Address Translation (NAT) to share the  
single IP address assigned to you by your Internet Service Provider while  
saving the cost of adding additional IP addresses to your Internet service  
account�SPI Firewall  
The Router supports a variety of networking environments including Mac  
OS® 8�x, 9�x, X v10�x, Linux®, Windows® 98, Me, NT®, 2000, XP, Vista®,  
and others� All that is needed is an Internet browser and a network  
adapter that supports TCP/IP (the standard language of the Internet)�  
sPI firewall  
Patent-Pending network status display  
Your Router is equipped with a firewall that will protect your network  
from a wide array of common hacker attacks including IP Spoofing, Land  
Attack, Ping of Death (PoD), Denial of Service (DoS), IP with zero length,  
Smurf Attack, TCP Null Scan, SYN flood, UDP flooding, Tear Drop  
Attack, ICMP defect, RIP defect, and fragment flooding�  
Lighted LEDs on the front of the Router indicate which functions are in  
operation� You’ll know at-a-glance whether your Router is connected to  
the Internet� This feature eliminates the need for advanced software and  
status-monitoring procedures�  
Web-based advanced User Interface  
Integrated 10/100 4-Port switch  
You can set up the Router’s advanced functions easily through your web  
browser, without having to install additional software onto the computer�  
There are no disks to install or keep track of and, best of all, you can  
make changes and perform setup functions from any computer on the  
network quickly and easily�  
The Router has a built-in, four-port network switch to allow your wired  
computers to share printers, data and MP3 files, digital photos, and  
much more� The switch features automatic detection so it will adjust to  
the speed of connected devices� The switch will transfer data between  
computers and the Internet simultaneously without interrupting or  
consuming resources�  
G+ MIMO Wireless Router  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROdUCT OVeRVIeW  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Universal Plug and Play (UPnP)  
Integrated G+ MIMO Wireless access Point  
UPnP is a technology that offers seamless operation of voice  
messaging, video messaging, games, and other applications that are  
UPnP-compliant�  
G+ MIMO is an exciting new wireless technology that achieves data rates of  
up to 54Mbps� Actual throughput is typically lower than the connected  
data rate and will vary depending on your networking environment�  
nOTe: The standard transmission rate—54Mbps—is the physical data  
rate� Actual data throughput will be lower�  
support for VPn Pass-Through  
If you connect to your office network from home using a VPN  
connection, your Router will allow your VPN-equipped computer to pass  
through the Router and to your office network�  
MaC address filtering  
For added security, you can set up a list of MAC addresses (unique  
client identifiers) that are allowed access to your network� Every  
computer has its own MAC address� Simply enter these MAC addresses  
into a list using the Web-Based Advanced User Interface and you can  
control access to your network�  
built-In dynamic Host Configuration Protocol (dHCP)  
Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes  
for the easiest possible connection of a network� The DHCP server will  
assign IP addresses to each computer automatically so there is no need  
for a complicated networking setup�  
setup assistant  
The Setup Assistant, second generation of Belkin’s renowned Easy  
Install Wizard, takes the guesswork out of setting up your Router� This  
automatic software determines your network settings for you and sets  
up the Router for connection to your Internet Service Provider (ISP)� In a  
matter of minutes, your Router will be up and running on the Internet�  
nOTe: Setup Assistant software is compatible with Windows 2000,  
XP, and Vista; and Mac OS X v10�x� If you are using another operating  
system, the Router can be set up using the Alternate Setup Method  
described in this User Manual (see page 20)  
G+ MIMO Wireless Router  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
KnOWInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
The Router has been designed to be placed on a desktop� All of the  
cables exit from the rear of the Router for better organization and utility�  
The Network Status Display is easily visible on the FRONT of the Router  
to provide you with information about network activity and status�  
Package Contents  
Belkin G+ MIMO Wireless Router  
Quick Installation Guide  
Belkin Setup Assistant Software CD  
RJ45 Ethernet Networking Cable  
Power Supply  
User Manual on the Setup Assistant CD  
system Requirements  
Broadband Internet connection such as a cable or DSL modem  
with RJ45 (Ethernet) connection  
At least one computer with an installed network interface adapter  
TCP/IP networking protocol installed on each computer  
RJ45 Ethernet networking cable  
(A)  
(B)  
(C)  
(D)  
(E)  
Internet browser  
setup assistant software system Requirements  
(F)  
A computer running Windows® 2000, XP, or Vista®; or  
Mac OS® X v10�x  
(G)  
Minimum 1GHz processor and 128MB RAM  
Internet browser  
G+ MIMO Wireless Router  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
KnOWInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
a� Wireless security  
d� Wired-Computer status  
OFF  
Wireless security is off  
Wireless security is on  
Off  
Wired computer is not present  
Wired computer is connected to  
the Router  
Solid Green  
Solid Green  
Problem with wired computer  
connecting properly to the Router  
WPS  
b� Wi-fi Protected setup (WPs) button  
Blinking Amber  
This button is used for the Wi-Fi Protected Setup feature� Please refer to  
the “Changing the Wireless Security Settings” section�  
e� Router/Power status  
C� Wireless-Computer status  
When you apply power to the Router or restart it, a short period of time  
elapses while the Router boots up� During this time, the “router” icon  
blinks� When the Router has completely booted up, the “router” icon  
becomes a solid light, indicating the Router is ready for use�  
Off  
Wireless computer is not present  
Wireless computer is connected  
to the Router  
Solid Green  
Off  
Router is off  
Problem with wireless computer  
connecting properly to the Router  
Blinking Amber  
Blinking Green  
Solid Green  
Router is booting up  
Router is on and ready  
G+ MIMO Wireless Router  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
KnOWInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
f� Modem status  
This icon lights in green to indicate that your modem is connected  
properly to the Router� It turns amber when problem is detected�  
Router is NOT connected  
to modem  
OFF  
Router is connected to modem  
and functioning properly  
Solid Green  
Blinking Amber  
Problem with modem  
G� Internet status  
This unique icon shows you when the Router is connected to the  
Internet� When the light is off, the Router is NOT connected to the  
Internet� When the light is blinking amber, the Router is attempting to  
connect to the Internet� When the light is solid green, the Router is  
connected to the Internet� When using the “Disconnect after x minutes”  
feature, this icon becomes extremely useful in monitoring the status of  
your Router’s connection�  
(H)  
(I)  
Router is NOT connected to the  
Internet  
Off  
(J)  
(K)  
Router is attempting to connect  
Blinking Amber  
to the Internet  
Router is connected to  
Solid Green  
the Internet  
G+ MIMO Wireless Router  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
KnOWInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
H� Connections to Wired Computers – Gray  
J� Reset button – Red  
Connect your wired (non-wireless) computers to these ports� These  
ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for  
standard UTP category 5 or 6 Ethernet cable� The ports are labeled 1  
through 4�  
The “Reset” button is used in rare cases when the Router may function  
improperly� Resetting the Router will restore the Router’s normal  
operation while maintaining the programmed settings� You can also  
restore the factory default settings by using the “Reset” button� Use  
the restore option in instances where you may have forgotten your  
custom password�  
I� Connection to Modem  
yellow  
i� Resetting the Router  
This port is for connection to your cable or DSL modem� Use the cable  
that was provided with the router to connect the modem to this port�  
Use of a cable other than the one supplied with the router may not  
work properly�  
Push and release the “Reset” button� The lights on the Router will  
momentarily flash� The “router” light will begin to blink� When the  
“router” light becomes solid again, the reset is complete�  
ii� Restoring the factory defaults  
Press and hold the “reset” button for at least 10 seconds, then release  
it� The lights on the Router will momentarily flash� The “router” light will  
begin to blink� When the “router” light becomes solid again, the restore  
is complete�  
K� Power Jack – black  
Connect the included 12V/1A DC power supply to this jack�  
G+ MIMO Wireless Router  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCTInG and COnfIGURInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Verify the contents of your box� you should have the following:  
setup assistant  
Belkin G+ MIMO Wireless Router  
Belkin has provided our Setup Assistant software to make installing your  
Router a simple and easy task� You can use it to get your Router up and  
running in minutes� The Setup Assistant requires that your computer be  
connected directly to your Router and that the Internet connection is  
active and working at the time of installation� If it is not, you must use  
the “Alternate Setup Method” section of this User Manual to configure  
your Router� Additionally, if you are using an operating system other than  
Windows 2000, XP, or Vista, or Mac OS X v10�x, you must set up the  
Router using the “Alternate Setup Method” section of this User Manual�  
Quick Installation Guide  
RJ45 Ethernet Networking Cable  
Power Supply  
Belkin Setup Assistant Software CD  
User Manual on the Setup Assistant CD  
Modem Requirements  
Your cable or DSL modem must be equipped with an RJ45 Ethernet  
port� Many modems have both an RJ45 Ethernet port and a USB  
connection� If you have a modem with both Ethernet and USB, and are  
using the USB connection at this time, you will be instructed to use the  
RJ45 Ethernet port during the installation procedure� If your modem has  
only a USB port, you can request a different type of modem from your  
ISP, or you can, in some cases, purchase a modem that has an RJ45  
Ethernet port on it�  
Usb  
ethernet  
G+ MIMO Wireless Router  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCTInG and COnfIGURInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
step 1: Hardware Connections – follow the Quick Installation Guide (QIG)  
A
WAN  
B
C
D
A
D
LAN  
C
D
aUnplug your modem’s power cord� Put the Router next to the  
eWait 20 seconds for the  
Router to start up� Look  
at the display on the front  
of the Router� Make sure  
the “Wired” and “Router”  
modem� Raise the Router’s antennas�  
b� Locate the networking cable that connects your modem and  
computer� Unplug that cable from your modem, and plug it into any  
gray port on the back of the Router�  
icons are lit up in green� If  
they are not, recheck your  
connections�  
C� Find your new networking cable (included in the box with your  
Router) and connect it to the yellow port on the back of the Router�  
Connect the other end to your modem, in the port that’s now free�  
dPlug in your modem’s power cord� Wait 60 seconds for the modem  
to start up� Plug the Router’s power supply into the black port on  
the back� Plug the other end into the wall outlet�  
G+ MIMO Wireless Router  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCTInG and COnfIGURInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
step 2: set Up the Router – Run the setup assistant software  
aShut down any programs that are running on your computer at this  
time� Turn off any firewall or Internet-connection-sharing software  
on your computer�  
b� Insert the CD into your computer� The Setup Assistant will  
automatically appear on your computer’s screen within 15  
seconds� Click on “Go” to run the Setup Assistant� Follow the  
instructions there�  
IMPORTanT: Run the Setup Assistant from the computer that is  
directly connected to the Router from Step 1 – B�  
note for Windows Users: If the Setup Assistant does not start  
up automatically, select your CD-ROM drive from “My Computer”  
and double-click on the file named “SetupAssistant” to start the  
Setup Assistant�  
G+ MIMO Wireless Router  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCTInG and COnfIGURInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Confirmation screen  
Progress screen  
Verify that you have completed all QIG steps by checking the box to the  
right of the arrow� Click “Next” to continue�  
Setup Assistant will show you a progress screen each time a step in the  
setup has been completed�  
G+ MIMO Wireless Router  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCTInG and COnfIGURInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
1�1 Checking settings  
1�2 Verifying Hardware Connections  
The Setup Assistant will now verify your hardware connection�  
The Setup Assistant will now examine your computer’s network settings  
and gather information needed to complete the Router’s connection to  
the Internet�  
G+ MIMO Wireless Router  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCTInG and COnfIGURInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
1�3 naming your Wireless network  
1�4 Requesting Internet account Info (if needed)  
The Setup Assistant will display the default wireless network name or  
Service Set Identifier (SSID)� This is the name of your wireless network  
to which your computers or devices with wireless network adapters  
will connect� You can either use the default or change it to something  
unique� Write down this name for future reference� Click “Next”  
to continue�  
If your Internet account requires a login and password, you will be  
prompted with a screen similar to the illustration below� Select your  
country or ISP from the drop-down boxes�  
G+ MIMO Wireless Router  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCTInG and COnfIGURInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
1�5 Configuring the Router  
1�6 Checking Internet Connection  
The Setup Assistant will now configure your Router by sending data to  
the Router and restarting it� Wait for the on-screen instructions�  
We are almost done� The Setup Assistant will now check your  
connection to the Internet�  
note: Do not disconnect any cable or power off the Router while the  
Router is rebooting� Doing so will render your Router inoperable�  
G+ MIMO Wireless Router  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCTInG and COnfIGURInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Congratulations  
Troubleshooting  
You have finished installing your new Belkin Router� You will see  
the Congratulations screen when your Router can connect to the  
Internet� You can begin surfing by opening your browser and going to  
any website�  
If the Setup Assistant is not able to connect to the Internet, you will see  
the following screen� Follow the on-screen instructions to go through the  
troubleshooting steps�  
You can use the Setup Assistant to set up your other wired and wireless  
computers to connect to the Internet by clicking “Next”� If you decide to  
add computers to your Router later, select “Exit the Assistant” and then  
click “Next”�  
G+ MIMO Wireless Router  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COnneCTInG and COnfIGURInG yOUR ROUTeR  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
1�7 Optional: assistance Connecting Other Computers  
Congratulations  
This optional step will help you to connect additional wired and wireless  
computers to your network� Follow the on-screen instructions�  
Once you have verified that your other wired and wireless computers are  
properly connected, your network is set up and working� You can now  
surf the Internet� Click “Next” to take you back to the main menu�  
G+ MIMO Wireless Router  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
step 1: Hardware Connections – follow the Quick Installation Guide  
See the QIG or Step 1: Hardware Connections from the previous section�  
step 2: set your Computer’s network settings to Work with a dHCP server  
See the section in this User Manual called “Manually Configuring Network Settings” for directions�  
step 3 Configure the Router Using the Web-based advanced User Interface  
Using your Internet browser, you can access the Router’s Web-Based Advanced User Interface� In your browser, type “192168�2�1” (you do not need  
to type in anything else such as “http://” or “www”)� Then press the “Enter” key�  
G+ MIMO Wireless Router  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
logging into the Router  
logging out of the Router  
You will see the Router’s home page in your browser window� The home  
page is visible to any user who wants to see it� To make any changes  
to the Router’s settings, you have to log in� Clicking the “Login” button  
or clicking on any one of the links on the home page will take you to  
the login screen� The Router ships with no password entered� In the  
login screen, leave the password blank and click the “Submit” button to  
log in�  
One computer at a time can log into the Router for the purposes of  
making changes to the settings of the Router� Once a user has logged in  
to make changes, there are two ways that the computer can be logged  
out� Clicking the “Logout” button will log the computer out� The second  
method is automatic� The login will time out after a specified period of  
time� The default login time-out is 10 minutes� This can be changed from  
one to 99 minutes� For more information, see the section in this manual  
titled “Changing the Login Time-Out Setting”�  
G+ MIMO Wireless Router  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Understanding the Web-based advanced User Interface  
The home page is the first page you will see when you access the Advanced User Interface (UI)� The home page shows you  
a quick view of the Router’s status and settings� All advanced setup pages can be reached from this page�  
(2)  
(5)  
(11)  
(4)  
(3)  
(6)  
(7)  
(8)  
(1)  
(9)  
(10)  
G+ MIMO Wireless Router  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
1� Quick-navigation links  
4� login/logout button  
You can go directly to any of the Router’s advanced UI pages by clicking  
directly on these links� The links are divided into logical categories  
and grouped by tabs to make finding a particular setting easier to  
find� Clicking on the purple header of each tab will show you a short  
description of the tab’s function�  
This button enables you to log in and out of the Router with the press of  
one button� When you are logged into the Router, this button will change  
to read “Logout”� Logging into the Router will take you to a separate  
login page where you will need to enter a password� When you are  
logged into the Router, you can make changes to the settings� When you  
are finished making changes, you can log out of the Router by clicking  
the “Logout” button� For more information about logging into the Router,  
see the section called “Logging into the Router”�  
2� Home button  
The home button is available in every page of the UI� Pressing this  
button will take you back to the home page�  
5� Internet-status Indicator  
This indicator is visible in all pages of the Router, indicating the  
connection status of the Router� When the indicator says “Connected”  
in green, the Router is connected to the Internet� When the Router is  
not connected to the Internet, the indicator will read “Not Connected” in  
RED� The indicator is automatically updated when you make changes to  
the settings of the Router�  
3� Help button  
The “Help” button gives you access to the Router’s help pages� Help  
is also available on many pages by clicking “more info” next to certain  
sections of each page�  
G+ MIMO Wireless Router  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
6� language  
9� Internet settings  
Shows the settings of the Internet/WAN side of the Router that  
connects to the Internet� Changes to any of these settings can be made  
by clicking on the links or by clicking on the “Internet/WAN” quick-  
navigation link on the left side of the screen�  
Shows the active language for the Advanced User Interface� Select a  
desirable language by clicking one of the available languages�  
7� Version Info  
Shows the firmware version, boot-code version, hardware version, and  
serial number of the Router�  
10� features  
Shows the status of the Router’s, firewall, and wireless features�  
Changes can be made to the settings by clicking on any one of the links  
or by clicking the quick-navigation links on the left side of the screen�  
8� lan settings  
Shows you the settings of the Local Area Network (LAN) side of the  
Router� Changes can be made to the settings by clicking on any one  
of the links (IP Address, Subnet Mask, DHCP Server) or by clicking the  
“LAN” quick-navigation link on the left side of the screen�  
11� Page name  
The page you are on can be identified by this name� This User Manual  
will sometimes refer to pages by name� For instance “LAN > LAN  
Settings” refers to the “LAN Settings” page�  
G+ MIMO Wireless Router  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
step 4: Configuring your Router for Connection to your Internet service Provider (IsP)  
The “Internet/WAN” tab is where you will set up your Router to connect  
to your Internet Service Provider (ISP)� The Router is capable of  
connecting to virtually any ISP’s system provided you have correctly  
configured the Router’s settings for your ISP’s connection type� Your ISP  
connection settings are provided to you by your ISP� To configure the  
Router with the settings that your ISP gave you, click “Connection Type”  
(a) on the left side of the screen� Select the connection type you use� If  
your ISP gave you DNS settings, clicking “DNS” (b) allows you to enter  
DNS address entries for ISPs that require specific settings� Clicking  
“MAC Address” (C) will let you clone your computer’s MAC address or  
type in a specific WAN MAC address, if required by your ISPWhen you  
have finished making settings, the “Internet Status” indicator will read  
“connected” if your Router is set up properly�  
setting your Connection Type  
From the “Connection Type” page, you can select the type of connection  
you use� Select the type of connection you use by clicking the button (1)  
next to your connection type and then clicking “Next” (2)�  
(A)  
(B)  
(C)  
(1)  
(2)  
G+ MIMO Wireless Router  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting your Internet service Provider (IsP) Connection Type to dynamic IP  
A dynamic connection type is the most common connection type found with cable modems� Setting the connection type to “dynamic” in many cases  
is enough to complete the connection to your ISPSome dynamic connection types may require a host name� You can enter your host name in the  
space provided if you were assigned one� Your host name is assigned by your ISPSome dynamic connections may require that you clone the MAC  
address of the PC that was originally connected to the modem�  
1� Host name (1)  
This space is provided to enter a host name that needs to be visible to  
your ISPEnter your host name here and click “Apply Changes” (3)� If  
your ISP did not assign you a host name, or you are not sure, leave this  
blank�  
(1)  
(3)  
2� Change Wan MaC address (2)  
If your ISP requires a specific MAC address to connect to the service,  
you can enter a specific MAC address or clone the current computer’s  
MAC address through this link�  
(2)  
G+ MIMO Wireless Router  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting your Internet service Provider (IsP) Connection Type to static IP  
A static IP address connection type is less common than other connection types� If your ISP uses static IP addressing, you will need your IP address,  
subnet mask, and ISP gateway address� This information is available from your ISP or on the paperwork that your ISP left with you� Type in your  
information, then click “Apply Changes” (4)� After you apply the changes, the Internet Status indicator will read “connected” if your Router is set  
up properly�  
1�  
Provided by your ISPEnter your IP address here�  
2� subnet Mask (2)  
Provided by your ISPEnter your subnet mask here�  
3� IsP Gateway address (3)  
Provided by your ISPEnter the ISP gateway address here�  
IP address (1)  
(1)  
(2)  
(3)  
(4)  
G+ MIMO Wireless Router  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting your IsP Connection Type to PPPoe  
Most DSL providers use PPPoE as the connection type� If you use a DSL modem to connect to the Internet, your ISP may use PPPoE to log you into  
the service� If you have an Internet connection in your home or small office that doesn’t require a modem, you may also use PPPoE�  
Your connection type is PPPoE if:  
1)  
2)  
3)  
Your ISP gave you a user name and password, which is required to  
connect to the Internet�  
(1)  
(2)  
Your ISP gave you software such as WinPOET or Enternet300 that  
you use to connect to the Internet�  
(3)  
(4)  
(5)  
You have to double-click on a desktop icon other than your  
browser to get on the Internet�  
(6)  
G+ MIMO Wireless Router  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
1�  
User name  
5�  
MTU  
This space is provided to type in your user name that was assigned by  
your ISP�  
The MTU setting should never be changed unless your ISP gives you  
a specific MTU setting� Making changes to the MTU setting can cause  
problems with your Internet connection including disconnection from the  
Internet, slow Internet access, and problems with Internet applications  
working properly�  
2�  
Password  
Type in your password and retype it into the “Retype Password” box to  
confirm it�  
6�  
disconnect after X���  
The “Disconnect” feature is used to automatically disconnect the Router  
from your ISP when there is no activity for a specified period of time� For  
instance, placing a check mark next to this option and entering “5” into  
the minute field will cause the Router to disconnect from the Internet  
after five minutes of no Internet activity� This option should be used if  
you pay for your Internet service by the minute�  
3�  
Get IP by dHCP  
If your ISP provided you with a specific IP address, uncheck this box  
and enter your IP address, subnet mask, and default gateway in the  
fields that appear�  
4�  
service name  
A service name is rarely required by an ISPIf you are not sure if your  
ISP requires a service name, leave this blank�  
G+ MIMO Wireless Router  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting your Internet service Provider (IsP) Connection Type to Point-to-Point Tunneling Protocol (PPTP)  
[European Countries Only]  
Some ISPs require a connection using PPTP protocol, a type of  
connection most common in European countries� This sets up a direct  
connection to the ISP’s system� Type in the information provided by  
your ISP in the space provided� When you have finished, click “Apply  
Changes”� After you apply the changes, the Internet Status indicator will  
read “Connected” if your Router is set up properly�  
(1)  
(2)  
(3)  
(4)  
(5)  
(6)  
(9)  
G+ MIMO Wireless Router  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
1� PPTP account  
5� service IP address  
Provided by your ISPEnter your PPTP account name here�  
Provided by your ISPEnter your service IP address here�  
2� PPTP Password  
6� disconnect after X…�  
Type in your password and retype it into the “Retype Password” box to  
confirm it�  
The “Disconnect” feature is used to automatically disconnect the Router  
from your ISP when there is no activity for a specified period of time� For  
instance, placing a check mark next to this option and entering “5” into  
the minute field will cause the Router to disconnect from the Internet  
after five minutes of no Internet activity� This option should be used if  
you pay for your Internet service by the minute�  
3� Host name  
Provided by your ISPEnter your host name here�  
4� Get IP by dHCP  
If your ISP provided you with a specific IP address, uncheck this box  
and enter your IP address, subnet mask, and default gateway in the  
fields that appear�  
G+ MIMO Wireless Router  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting your Connection Type if you are a Telstra® bigPond/Optusnet Cable User  
[Australia Only] Follow the on-screen steps and click “Apply Changes” to complete your setup�  
G+ MIMO Wireless Router  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting Custom domain name server (dns) settings  
A “Domain Name Server” is a server located on the Internet that  
translates Universal Resource Locators (URLs) like “www�belkin�com”  
into IP addresses� Many Internet Service Providers (ISPs) do not require  
you to enter this information into the Router� The “Automatic from ISP”  
(1) box should be checked if your ISP did not give you a specific DNS  
address� If you are using a static IP connection type, then you may  
need to enter a specific DNS address and secondary DNS address for  
your connection to work properly� If your connection type is dynamic or  
PPPoE, it is likely that you do not have to enter a DNS address� Leave  
the “Automatic from ISP” box checked� To enter the DNS address  
settings, uncheck the “Automatic from ISP” box and enter your DNS  
entries in the spaces provided� Click “Apply Changes” (2) to save  
the settings�  
(1)  
(2)  
G+ MIMO Wireless Router  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
alTeRnaTe seTUP MeTHOd  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Configuring your Wan Media access Controller (MaC) address  
entering a specific MaC address  
All network components including cards, adapters, and routers, have  
a unique “serial number” called a MAC address� Your Internet Service  
Provider (ISP) may record the MAC address of your computer’s adapter  
and only let that particular computer connect to the Internet service�  
When you install the Router, its own MAC address will be “seen” by the  
ISP and may cause the connection not to work� Belkin has provided  
the ability to clone (copy) the MAC address of the computer into the  
Router� This MAC address, in turn, will be seen by the ISP’s system as  
the original MAC address and will allow the connection to work� If you  
are not sure whether your ISP needs to see the original MAC address,  
simply clone the MAC address of the computer that was originally  
connected to the modem� Cloning the address will not cause any  
problems with your network�  
In certain circumstances you may need a specific WAN MAC address�  
You can manually enter one in the “MAC Address” page� Type in a MAC  
address in the spaces provided (2) and click “Apply Changes” (3) to  
save the changes� The Router’s WAN MAC address will now be changed  
to the MAC address you specified�  
(2)  
(1)  
Cloning your MaC address  
To clone your MAC address, make sure that you are using the computer  
that was ORIGINALLY CONNECTED to your modem before the Router  
was installed� Click the “Clone” button (1)� Click “Apply Changes” (3)�  
Your MAC address is now cloned to the Router�  
(3)  
G+ MIMO Wireless Router  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Using your Internet browser, you can access the Router’s Web-Based  
Advanced User Interface� In your browser, type “192168�2�1” (do  
not type in anything else such as “http://” or “www”) then press the  
“Enter” key�  
Viewing the lan settings  
Clicking on the header of the “LAN Setup” tab (1) will take you its header  
page� A quick description of the functions can be found here� To view  
the settings or make changes to any of the LAN settings, click on “LAN  
Settings” (2), or to view the list of connected computers, click on “DHCP  
Client List” (3)�  
(1)  
(2)  
(3)  
You will see the Router’s home page in your browser window�  
G+ MIMO Wireless Router  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Changing lan settings  
All settings for the internal LAN setup of the Router can be viewed and changed here�  
1� IP address  
The “IP address” is the internal IP address of the Router� The default IP  
address is “192�168�2�1”� To access the advanced setup interface, type  
this IP address into the address bar of your browser� This address can  
be changed if needed� To change the IP address, type in the new IP  
address and click “Apply Changes”� The IP address you choose should  
be a non-routable IPExamples of a non-routable IP are:  
(1)  
(2)  
(3)  
192�168�x�x (where x is anything between 1 and 254)  
10�x�x�x (where x is anything between 1 and 254)  
172�y�x�x (where x is anything between 1 and 254 and y is anything  
between 16 and 31)  
(4)  
(5)  
2�  
subnet Mask  
(6)  
There is no need to change the subnet mask� This is a unique, advanced  
feature of your Belkin Router� It is possible to change the subnet mask  
if necessary; however, do NOT make changes to the subnet mask  
unless you have a specific reason to do so� The default setting is  
“255�255�255�0”�  
G+ MIMO Wireless Router  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
3�  
dHCP server  
5�  
lease Time  
The DHCP server function makes setting up a network very easy by  
assigning IP addresses to each computer on the network automatically�  
The default setting is “On”� The DHCP server can be turned OFF if  
necessary; however, in order to do so you must manually set a static  
IP address for each computer on your network� To turn off the DHCP  
server, select “Off” and click “Apply Changes”�  
The length of time the DHCP server will reserve the IP address for each  
computer� We recommend that you leave the lease time set to “Forever”�  
The default setting is “Forever”, meaning that any time a computer is  
assigned an IP address by the DHCP server, the IP address will not  
change for that particular computer� Setting lease times for shorter  
intervals such as one day or one hour frees IP addresses after the  
specified period of time� This also means that a particular computer’s  
IP address may change over time� If you have set any of the other  
advanced features of the Router such as DMZ or client IP filters, these  
are dependent on the IP address� For this reason, you will not want the  
IP address to change�  
4�  
IP Pool  
The range of IP addresses set aside for dynamic assignment to the  
computers on your network� The default is 2–100 (99 computers)� If you  
want to change this number, you can do so by entering a new starting  
and ending IP address and clicking on “Apply Changes”� The DHCP  
server can assign 100 IP addresses automatically� This means that  
you cannot specify an IP address pool larger than 100 computers� For  
example, starting at 50 means you have to end at 150 or lower so as not  
to exceed the 100-client limit� The starting IP address must be lower in  
number than the ending IP address�  
6�  
local domain name  
The default setting is “Belkin”� You can set a local domain name  
(network name) for your network� There is no need to change this setting  
unless you have a specific advanced need to do so� You can name the  
network anything you want such as “MY NETWORK”�  
G+ MIMO Wireless Router  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Viewing the dHCP Client list Page  
You can view a list of the computers (known as clients), which are  
connected to your network� You are able to view the IP address (1) of the  
computer, the host name (2) (if the computer has been assigned one),  
and the MAC address (3) of the computer’s network interface card (NIC)�  
Pressing the “Refresh” (4) button will update the list� If there have been  
any changes, the list will be updated�  
(2)  
(3)  
(4)  
(1)  
G+ MIMO Wireless Router  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Configuring the Wireless network settings  
The “Wireless” tab lets you make changes to the wireless network settings� From this tab you can make changes to the wireless network name or  
Service Set Identifier (SSID), operating channel, encryption security settings, and configure the Router to be used as an access point�  
Changing the Wireless network name (ssId)  
To identify your wireless network, a name called the SSID is used�  
The SSID is your network name� The default network name of the  
Router is “Belkin G+ MIMO Wireless” followed by six digits that are  
(1)  
(2)  
unique to your Router� Your network name will look something like  
“Belkin_G+MIMO_Wireless_123456”� You can change this to anything  
you choose, or you can leave it unchanged� Keep in mind, if you decide  
to change your wireless network name, and there are other wireless  
networks operating in your area, your network name needs to be  
different from other wireless networks that may be operating in your  
area� To change the SSID, type in the SSID that you want to use in the  
SSID field (1) and click “Apply Changes” (2)� The change is immediate�  
If you make a change to the SSID, your wireless-equipped computers  
may also need to be reconfigured to connect to your new network  
name� Refer to the documentation of your wireless network adapter for  
information on making this change�  
note: Please periodically check for new Router firmware updates  
from the “Utilities > Firmware update” page� Newer firmware can fix  
problems, add wireless features, and/or improve wireless performance  
(see page 64)�  
G+ MIMO Wireless Router  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Changing the Wireless Channel  
2) 802�11g only  
There are a number of operating channels from which you can choose—  
in the United States, there are 11 and in the United Kingdom (and most  
of Europe), there are 13� In a small number of other countries, there are  
other channel requirements� Your Router is configured to operate on the  
proper channels for the country in which you reside� The channel can  
be changed if needed� If there are other wireless networks operating in  
your area, your network should be set to operate on a channel that is  
different than the other wireless networks�  
Setting the Router to this mode will allow only 80211g-compliant  
devices to join the network, keeping out any slower 80211b devices�  
3) 802�11b+g  
Setting the Router to this mode will allow 80211b- and  
802�11g-compliant devices to join the network�  
Using the Wireless Mode switch  
This switch allows you to set the Router’s wireless modes� There are  
several modes�  
note: Some modes may require firmware updates to be enabled�  
1)  
Off  
This mode will turn OFF the Router’s access point, so no wireless  
devices can join the network� Turning off the wireless function of your  
Router is a great way to secure your network when you are away from  
home for a long period of time, or don’t want to use the wireless feature  
of the Router at a certain time�  
G+ MIMO Wireless Router  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Using the broadcast ssId feature  
80211e/WMM Qos switch  
Note: This advanced feature should be employed by advanced users  
only� For security, you can choose not to broadcast your network’s  
SSID� Doing so will keep your network name hidden from computers  
that are scanning for the presence of wireless networks� To turn off  
the broadcast of the SSID, remove the check mark from the box next  
to “Broadcast SSID”, and then click “Apply Changes”� The change is  
immediate� Each computer now needs to be set to connect to your  
specific SSID; an SSID of “ANY” will no longer be accepted� Refer to  
the documentation of your wireless network adapter for information on  
making this change�  
Allows you to turn ON or OFF wireless QoS�  
Changing the Wireless security settings  
Your G+ MIMO Wireless Router is equipped with the latest security  
standard called Wi-Fi Protected Access2 (WPA2) and the legacy  
security standard called Wired Equivalent Privacy (WEP)� Your Router  
also supports the Wi-Fi Protected Setup(WPS) specification,  
which simplifies the setup of a wireless network� WPS uses familiar  
methodologies, such as typing in a Personal Identification Number (PIN)  
or pushing a button, to enable users to automatically configure network  
names and strong WPA/WPA2 data encryption and authentication� By  
default, wireless security is disabled� To enable security, you will need  
to determine which standard you want to use� To access the security  
settings, click “Security” on the “Wireless” tab�  
Protected Mode switch  
Protected mode ensures proper operation of 80211g devices on your  
G+ MIMO network when 80211b devices are present or when there is heavy  
802�11b traffic in the operating environment� If you are using a mix of  
Belkin G+ MIMO Wireless Cards and 80211b or 802�11g cards on your  
network, protected mode should be used� If you are in an environment  
where there is no other (or very little) 80211b wireless network traffic,  
best 80211g performance may be achieved with protected mode OFF�  
If you are operating in an environment with HEAVY 80211b traffic or  
interference, best 80211g performance may be achieved with protected  
mode ON�  
G+ MIMO Wireless Router  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Using Wi-fi Protected setup  
PIN: The client device has a PIN number (either four or eight digits) that  
is associated with WPS� Enable WPS through the screen illustrated  
below� Enter the client’s PIN into the Router’s internal registrar  
(accessed through this screen)� The client will be automatically enrolled  
into your wireless network within two minutes�  
WPS uses WPA2 (described on page 44) for encryption� It does not  
provide additional security, but rather, standardizes the method for  
securing your wireless network� You may use either the Push Button  
Configuration (PBC) method or PIN method to allow a device access to  
your wireless network� Conceptually, the two methods work as follows:  
PBC: Push and hold the WPS button located on the front of your Router  
for three seconds� Then, initiate the WPS procedure on the client  
device within two minutes� Refer to your client’s documentation on this  
procedure� Pushing the PBC button will automatically enable WPS� The  
client has now been securely added to your wireless network�  
G+ MIMO Wireless Router  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
1�  
2�  
Wi-Fi Protected Setup (WPS): Enabled or Disabled�  
Personal Identification Number (PIN) Method: In this method, a  
wireless client wishing to access your network must supply a 4- or  
8-digit PIN to the Router� After clicking “Enroll”, you must start the  
WPS handshaking procedure from the client within two minutes�  
3�  
4�  
Router PIN: If an external registrar is available, you may enter in the  
Router’s PIN to the registrar� Click “Generate New PIN” to change  
the PIN from the default value� Click “Restore Default PIN” to reset  
the PIN value�  
Push Button Configuration (PBC) Method: PBC is an alternate  
method to connect to a WPS network� Push the PBC button  
located on the back of the Router for three seconds, and then  
initiate the PBC on the client device� Alternatively, push the “Start  
PBC” soft button to start this process�  
5�  
Manual Configuration Method: This section lists the default security  
settings to be set up if not using WPS�  
G+ MIMO Wireless Router  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
WPa2 Requirements  
IMPORTanT: In order to use WPA2 security, all your computers and wireless client adapters must be upgraded with patches, driver, and client  
utility software that supported WPA2� At the time of this User Manual’s publication, a couple security patches are available, for free download, from  
Microsoft®� These patches work only with the Windows XP operating system� Other operating systems are not supported at this time�  
For Windows XP computers that do not have Service Pack 2 (SP2), a file from Microsoft called “Windows XP Support Patch for Wireless  
Protected Access (KB 826942)” is available for free download at http://support�microsoft�com/kb/826942  
For Windows XP with Service Pack 2, Microsoft has released a free download to update the wireless client components to support WPA2  
(KB971021)� The update is available from: http://support�microsoft�com/kb/917021  
IMPORTanT: You also need to ensure that all your wireless client cards/adapters support WPA2, and that you have downloaded and installed the  
latest driver� Most of the Belkin wireless cards have driver updates available for download from the Belkin support site: www�belkin�com/networking�  
G+ MIMO Wireless Router  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting WPa/WPa2-Personal (PsK)  
Like WPA security, WPA2 is available in both WPA2-Personal (PSK) mode and WPA2-Enterprise (RADIUS) mode� Typically, WPA2-Personal (PSK) is  
the mode that will be used in a home environment, while WPA2-Enterprise (RADIUS) is implemented in a business environment where an external  
radius server distributes the network key to the clients automatically� Your Router supports WPA2-Personal (PSK)�  
1�  
After you’ve set up your Router, go to the “Security” under  
“Wireless” and select “WPA/WPA2-Personal (PSK)” from the  
“Security Mode” drop-down menu�  
2�  
For “Authentication”, select “WPA-PSK”, “WPA2-PSK”, or “WPA-  
PSK + WPA2-PSK”� This setting will have to be identical on the  
wireless clients that you set up� “WPA-PSK + WPA2-PSK” mode  
will allow the Router to support clients running either WPA or WPA2  
security�  
3�  
4�  
For “Encryption Technique”, select “TKIP”, “AES”, or “TKIP+AES”�  
This setting will have to be identical on the wireless clients that you  
set up�  
Enter your pre-shared key (PSK)� This can be from eight to 63  
characters and can be letters, numbers, or symbols� This same  
key must be used on all of the wireless clients that you set up� For  
example, your PSK might be something like: “Smith family network  
key”� Click “Apply Changes” to finish� You must now set all wireless  
clients to match these settings�  
IMPORTanT: Make sure your wireless computers are updated to work  
with WPA2 and have the correct settings to get proper connection to  
the Router�  
G+ MIMO Wireless Router  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting WPa security  
note: To use WPA security, your wireless network cards must be equipped with software that supports WPA� At the time this User Manual was  
published, a security patch from Microsoft is available for free download� This patch works only with Windows XP�  
Your Router supports WPA-Personal (PSK), which uses what is known as a pre-shared key (PSK) as the security key� A pre-shared key is basically a  
password that is between eight and 63 characters long� It can be a combination of letters, numbers, or characters� Each client uses the same key to  
access the network� Typically this is the mode that will be used in a home environment�  
setting WPa-PsK  
1�  
2�  
3�  
From the “Security Mode” drop-down menu, select  
“WPA/WPA-Personal (PSK)”�  
For “Encryption Technique”, select “TKIP” or “AES”� This setting  
will have to be identical on the clients that you set up�  
Enter your pre-shared key� This can be from eight to 63 characters  
and can be letters, numbers, or symbols� This same key must be  
used on all of the clients that you set up�  
4�  
Click “Apply Changes” to finish� You must now set all clients to  
match these settings�  
G+ MIMO Wireless Router  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting WeP encryption  
note to Mac users: The “Passphrase” option will not operate with Apple® AirPort®� To configure encryption for your Mac computer, set the encryption  
using the manual method described in the next section�  
1�  
2�  
Select “128-bit WEP” or “64-bit WEP” from the drop-down menu�  
After selecting your WEP encryption mode, you can enter you  
WEP key manually by typing in the hex WEP key manually, or  
you can type a passphrase in the “PassPhrase” field and click  
“Generate” to create a WEP key from the passphrase� Click “Apply  
Changes” to finish� You must now set all of your clients to match  
these settings�  
3�  
Encryption in the Router is now set� Each of your computers on  
your wireless network will now need to be configured with the  
same passphrase� Refer to the documentation of your wireless  
network adapter for information on making this change�  
G+ MIMO Wireless Router  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Using a Hexadecimal Key  
A hexadecimal key is a mixture of numbers and letters from A–F and  
0–9� 64-bit keys are 10 digits long and can be divided into five two-digit  
numbers� 128-bit keys are 26 digits long and can be divided into 13  
two-digit numbers�  
note to Mac users: Original Apple AirPort products support 64-bit  
encryption only� Apple AirPort 2 products can support 64-bit or 128-bit  
encryption� Please check your product to see which version you are  
using� If you cannot configure your network with 128-bit encryption, try  
64-bit encryption�  
For instance:  
AF 0F 4B C3 D4 = 64-bit key  
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key  
In the boxes below, make up your key by writing in two characters  
between A–F and 0–9� You will use this key to program the encryption  
settings on your Router and your wireless computers�  
G+ MIMO Wireless Router  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Using the access Point Mode  
note: This advanced feature should be employed by advanced users only� The Router can be configured to work as a wireless network access point�  
Using this mode will defeat the NAT IP sharing feature and DHCP server� In AP mode, the Router will need to be configured with an IP address that is  
in the same subnet as the rest of the network that you will bridge to� The default IP address is 192168�2�254 and subnet mask is 255�255�255�0� These  
can be customized for your need�  
1�  
Enable the AP mode my selecting “Enable” in the “Use as Access  
Point only” page� When you select this option, you will be able to  
change the IP settings�  
2�  
3�  
Set your IP settings to match your network� Click “Apply Changes”�  
Connect a cable from the WAN port on the Router to your  
existing network�  
The Router is now acting as an access point� To access the Router  
advanced user interface again, type the IP address you specified into  
your browser’s navigation bar� You can set the encryption settings, MAC  
address filtering, SSID, and channel normally�  
G+ MIMO Wireless Router  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting MaC address Control  
The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the wireless network� Note: This list  
applies only to wireless computers� This list can be configured so any computer attempting to access the wireless network that is not specified in the  
filter list will be denied access� When you enable this feature, you must enter the MAC address of each client (computer) to which you want to allow  
network access� The “Block” feature lets you turn on and off access to the network easily for any computer without having to add and remove the  
computer’s MAC address from the list�  
setting up an allow access list  
1�  
Select the “Allow” radio button (1) to begin setting up a list of  
computers allowed to connect to the wireless network�  
(1)  
(2)  
2�  
Next, in the “MAC Address” field that is blank (3), type in the MAC  
address of the wireless computer you want to be able to access  
the wireless network, then click “<<Add” (4)�  
(3)  
(4)  
3�  
4�  
Continue to do this until all of the computers you want to add have  
been entered�  
Click “Apply Changes” (5) to finish�  
(5)  
G+ MIMO Wireless Router  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting up a deny access list  
The “Deny Access” list lets you specify computers that you DO NOT want to access the network� Any computer in the list will not be allowed access  
to the wireless network� All others will�  
1�  
2�  
Select the “Deny” radio button (2) to begin setting up a list of  
computers to be denied access to the wireless network�  
Next, in the “MAC Address” field that is blank (3), type in the MAC  
address of the wireless computer you want to deny access to the  
wireless network, then click “<<Add” (4)�  
(1)  
(2)  
(3)  
(4)  
3�  
4�  
Continue to do this until all of the computers you want to deny  
access to have been entered�  
Click “Apply Changes” (5) to finish�  
(5)  
G+ MIMO Wireless Router  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Configuring the firewall  
Your Router is equipped with a firewall that will protect your network  
from a wide array of common hacker attacks including:  
The firewall also masks common ports that are frequently used to  
attack networks� These ports appear to be “stealth” meaning that for  
all intents and purposes, they do not exist to a would-be hacker� You  
can turn the firewall function off if needed; however, it is recommended  
that you leave the firewall enabled� Disabling the firewall protection will  
not leave your network completely vulnerable to hacker attacks, but it is  
recommended that you leave the firewall enabled�  
IP Spoofing  
Land Attack Ping of Death (PoD)  
Denial of Service (DoS)  
IP with zero length  
Smurf Attack  
TCP Null Scan  
SYN flood  
UDP flooding  
Tear Drop Attack  
ICMP defect  
RIP defect  
Fragment flooding  
G+ MIMO Wireless Router  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Configuring Internal forwarding settings  
Choosing an application  
The Virtual Servers function will allow you to route external (Internet)  
calls for services such as a web server (port 80), FTP server (Port 21), or  
other applications through your Router to your internal network� Since  
your internal computers are protected by a firewall, computers outside  
your network (over the Internet) cannot get to them because they cannot  
be “seen”� A list of common applications has been provided in case you  
need to configure the Virtual Server function for a specific application�  
If your application is not listed, you will need to contact the application  
vendor to find out which port settings you need�  
Select your application from the drop-down list� Click “Add”� The  
settings will be transferred to the next available space in the screen�  
Click “Apply Changes” to save the setting for that application� To remove  
an application, select the number of the row that you want to remove  
then click “Clear”�  
Manually entering settings into the Virtual server  
To manually enter settings, enter the IP address in the space provided  
for the internal (server) machine, the port(s) required to pass (use a  
comma between multiple ports), select the port type (TCP or UDP),  
and click “Apply Changes”� You can only pass one port per internal IP  
address� Opening ports in your firewall can pose a security risk� You can  
enable and disable settings very quickly� It is recommended that you  
disable the settings when you are not using a specific application�  
G+ MIMO Wireless Router  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting Client IP filters  
The Router can be configured to restrict access to the Internet, email, or  
other network services at specific days and times� Restriction can be set  
for a single computer, a range of computers, or multiple computers�  
To restrict Internet access to a single computer for example, enter the  
IP address of the computer you wish to restrict access to in the IP fields  
(1)� Next, enter “80” in both the port fields (2)� Select “Both” (3)� Select  
“Block” (4)� You can also select “Always” to block access all of the time�  
Select the day to start on top (5), the time to start on top (6), the day to  
end on the bottom (7), and the time to stop (8) on the bottom� Select  
“Enable” (9)� Click “Apply Changes”� The computer at the IP address  
you specified will now be blocked from Internet access at the times you  
specified� Note: Be sure you have selected the correct time zone under  
“Utilities> System Settings> Time Zone”�  
(5)  
(6)  
(1)  
(2)  
(3)  
(4)  
(7)  
(8)  
(9)  
G+ MIMO Wireless Router  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
enabling the demilitarized Zone (dMZ)  
The DMZ feature allows you to specify one computer on your network to be placed outside of the firewall� This may be necessary if the firewall is  
causing problems with an application such as a game or video conferencing application� Use this feature on a temporary basis� The computer in the  
DMZ is NOT protected from hacker attacks�  
To put a computer in the DMZ, enter the last digits of its IP address in  
the IP field and select “Enable”� Click “Apply Changes” for the change  
to take effect� If you are using multiple static WAN IP addresses, it is  
possible to select which WAN IP address the DMZ host will be directed  
to� Type in the WAN IP address you wish the DMZ host to direct to, enter  
the last two digits of the IP address of the DMZ host computer, select  
“Enable” and click “Apply Changes”�  
G+ MIMO Wireless Router  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Using dynamic dns  
The Dynamic DNS service allows you to alias a dynamic IP address to a static host name in any of the many domains DynDNS�org offers, allowing  
your network computers to be more easily accessed from various locations on the Internet� DynDNS�org provides this service, for up to five host  
names, free to the Internet community�  
The Dynamic DNSSM service is ideal for a home website, file server, or to make it easy to access your home PC and stored files while you’re at work�  
Using the service can ensure that your host name always points to your IP address, no matter how often your ISP changes it� When your IP address  
changes, your friends and associates can always locate you by visiting yourname�dyndns�org instead!  
To register free for your Dynamic DNS host name, please visit http://www�dyndns�org�  
setting up the Router’s dynamic dns Update Client  
You must register with DynDNS�org’s free update service before using  
this feature� Once you have your registration, follow the directions below  
1�  
2�  
3�  
4�  
Select DynDNS as the “DDNS Service” (1)�  
(1)  
Enter your DynDNS�org user name in the “User Name” field (2)�  
Enter your DynDNS�org password in the “Password” field (3)�  
(2)  
(3)  
(4)  
Enter the DynDNS�org domain name you set up with DynDNS�org  
in the “Domain Name” field (4)�  
5�  
Click “Update Dynamic DNS” (5) to update your IP address�  
(5)  
Whenever your IP address assigned by your ISP changes, the Router will  
automatically update DynDNS�org’s servers with your new IP address�  
You can also do this manually by clicking the “Update Dynamic DNS”  
button (5)�  
G+ MIMO Wireless Router  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
blocking an ICMP Ping  
Utilities  
Computer hackers use what is known as “pinging” to find potential  
victims on the Internet� By pinging a specific IP address and receiving a  
response from the IP address, a hacker can determine that something  
of interest might be there� The Router can be set up so it will not  
respond to an ICMP ping from the outside� This heightens your Router’s  
security level�  
The “Utilities” screen lets you manage different parameters of the Router  
and perform certain administrative functions�  
(1)  
To turn off the ping response, select “Block ICMP Ping” (1) and click  
“Apply Changes”� The Router will not respond to an ICMP ping�  
G+ MIMO Wireless Router  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Restarting the Router  
Sometimes it may be necessary to restart or reboot the Router if it  
begins working improperly� Restarting or rebooting the Router will NOT  
delete any of your configuration settings��  
3�  
The following message will appear� Restarting the Router can take  
up to 60 seconds� It is important not to turn off the power to the  
Router during the restart�  
4�  
A 60-second countdown will appear on the screen� When the  
countdown reaches zero, the Router will be restarted� The Router  
home page should appear automatically� If not, type in the Router’s  
address (default = 192�168�2�1) into the navigation bar of your  
browser�  
Restarting the Router to Restore normal Operation  
1�  
2�  
Click the “Restart Router” button�  
The following message will appear� Click “OK”�  
G+ MIMO Wireless Router  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Restoring factory default settings  
Using this option will restore all of the settings in the Router to the  
factory (default) settings� It is recommended that you back up your  
settings before you restore all of the defaults�  
3�  
The following message will appear� Restoring the defaults includes  
restarting the Router� It can take up to 60 seconds� It is important  
not to turn the power to the Router off during the restart�  
4�  
A 60-second countdown will appear on the screen� When the  
countdown reaches zero, the Router’s defaults will be restored� The  
Router home page should appear automatically� If it does not, type  
in the Router’s address (default = 192�168�2�1) into the navigation  
bar of your browser�  
1�  
Click the “Restore Defaults” button�  
2�  
The following message will  
appear� Click “OK”�  
G+ MIMO Wireless Router  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
saving a Current Configuration  
You can save your current configuration by using this feature� Saving  
your configuration will allow you to restore it later if your settings are  
lost or changed� It is recommended that you back up your current  
configuration before performing a firmware update�  
1�  
Click “Save”� A window  
called “File Download” will  
open� Click “Save”�  
G+ MIMO Wireless Router  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
2�  
A window will open that allows you to select the location where you  
want to save the configuration file� Select a location� You can name  
the file anything you want, or use the default name “user�conf”� Be  
sure to name the file so you can locate it yourself later� When you  
have selected the location and name of the file, click “Save”�  
3�  
When the save is complete,  
you will see the window  
below� Click “Close”�  
The configuration is now saved�  
G+ MIMO Wireless Router  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Restoring a Previous Configuration  
This option will allow you to restore a previously saved configuration�  
1�  
Click “Browse”� A window will open that allows you to select the  
location of the configuration file� All configuration files end with  
a “�conf”� Locate the configuration file you want to restore and  
double-click on it�  
G+ MIMO Wireless Router  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
2�  
3�  
You will be asked if you  
want to continue� Click  
“OK”�  
4�  
A 60-second countdown will appear on the screen� When the  
countdown reaches zero, the Router’s configuration will be  
restored� The Router’s home page should appear automatically�  
If not, type in the Router’s address (default = 192168�2�1) into the  
navigation bar of your browser�  
A reminder window will  
appear� It will take up  
to 60 seconds for the  
configuration restoration to  
complete� Click “OK”�  
G+ MIMO Wireless Router  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Updating the firmware  
From time to time, Belkin may release new versions of the Router’s firmware� Firmware updates contain feature improvements and fixes to problems  
that may have existed� When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Router’s  
firmware to the latest version�  
Checking for a new Version of firmware  
downloading a new Version  
of firmware  
The “Check Firmware” (1) button allows you to instantly check for a new  
version of firmware� When you click the button, a new browser window  
will appear informing you that either no new firmware is available or that  
there is a new version available� If a new version is available, you will  
have the option to download it�  
If you click the “Check Firmware”  
button and a new version of  
firmware is available, you will see  
a screen similar to the one here:  
(1)  
G+ MIMO Wireless Router  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
1�  
2�  
To download the new version of firmware, click “Download”�  
3�  
When the save is complete, you will see the following window�  
Click “Close”�  
A window will open that allows you to select the location where you  
want to save the firmware file� Select a location� You can name the  
file anything you want, or use the default name� Be sure to locate  
the file in a place where you can locate it yourself later� When you  
have selected the location, click “Save”�  
The download of the firmware is complete� To update the firmware,  
follow the next steps in “Updating the Router’s Firmware”�  
G+ MIMO Wireless Router  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Updating the Router’s firmware  
1�  
In the “Firmware Update” page, click “Browse”� A window will open  
that allows you to select the location of the firmware update file�  
2�  
Browse to the firmware file you downloaded� Select the file by  
double-clicking on the file name�  
G+ MIMO Wireless Router  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
3�  
The “Update Firmware” box will now display the location and name  
of the firmware file you just selected� Click “Update”�  
5�  
You will see one more message� This message tells you that the  
Router may not respond for as long as one minute as the firmware  
is loaded into the Router and the Router is rebooted� Click “OK”�  
6�  
A 60-second countdown will appear on the screen� When the  
countdown reaches zero, the Router firmware update will be  
complete� The Router home page should appear automatically� If  
not, type in the Router’s address (default = 192168�2�1) into the  
navigation bar of your browser�  
4�  
You will be asked if you are  
sure you want to continue�  
Click “OK”�  
G+ MIMO Wireless Router  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Changing system settings  
Changing the login Time-Out setting  
The “System Settings” page is where you can enter a new administrator  
password, set the time zone, enable remote management, and turn on  
and off the NAT function of the Router�  
The login time-out option allows you to set the period of time that you  
can be logged into the Router’s advanced setup interface� The timer  
starts when there has been no activity� For example, imagine you have  
made some changes in the advanced setup interface, then left your  
computer alone without clicking “Logout”� Assuming the time-out is set  
to 10 minutes, 10 minutes after you leave, the login session will expire�  
You will have to log into the Router again to make any more changes�  
The login time-out option is for security purposes and the default is set  
to 10 minutes� note: Only one computer can be logged into the Router’s  
advanced setup interface at one time�  
setting or Changing the administrator Password  
The Router ships with NO password entered� If you wish to add a  
password for greater security, you can set a password here� Write down  
your password and keep it in a safe place, as you will need it if you need  
to log into the Router in the future� It is also recommended that you  
set a password if you plan to use the remote management feature of  
your Router�  
G+ MIMO Wireless Router  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
setting the Time and Time Zone  
enabling Remote Management  
The Router keeps time by connecting to a Simple Network Time  
Protocol (SNTP) server� This allows the Router to synchronize the system  
clock to the global Internet� The synchronized clock in the Router is  
used to record the security log and control client filtering� Select the  
time zone that you reside in� You have the option to select a primary and  
a backup NTP server to keep your Router’s clock synchronized� Select  
your desired NPT server from the drop-down box, or simply keep it  
as is�  
Before you enable this advanced feature of your Belkin Router, MaKe  
sURe yOU HaVe seT THe adMInIsTRaTOR PassWORdRemote  
management allows you to make changes to your Router’s settings from  
anywhere on the Internet� There are two methods of remotely managing  
the Router� The first is to allow access to the Router from anywhere  
on the Internet by selecting “Any IP address can remotely manage the  
Router”� By typing in your WAN IP address from any computer on the  
Internet, you will be presented with a login screen where you need to  
type in the password of your Router�  
If you reside in an area that observes daylight saving, then place a check  
mark in the box next to “Enable Daylight Saving”� The system clock  
may not update immediately� Allow at least 15 minutes for the Router to  
contact the time servers on the Internet and get a response� You cannot  
set the clock yourself�  
The second method is to allow a specific IP address only to remotely  
manage the Router� This is more secure, but less convenient� To use  
this method, enter the IP address you know you will be accessing the  
Router from in the space provided and select “Only this IP address  
can remotely manage the Router”� Before you enable this function,  
it is STRONGLY RECOMMENDED that you set your administrator  
password� Leaving the password empty will potentially open your Router  
to intrusion�  
Advanced Feature: The “Remote Access Port” option allows you to  
configure the desired “Remote Access Port for Remote Management”  
feature� The default access port is set to port 80�  
G+ MIMO Wireless Router  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsInG THe Web-based adVanCed UseR InTeRfaCe  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
enabling/disabling UPnP  
enabling/disabling auto firmware Update  
This innovation provides the Router with the built-in capability to  
automatically check for a new version of firmware and alert you that  
the new firmware is available� When you log into the Router’s advanced  
interface, the Router will perform a check to see if new firmware is  
available� If so, you will be notified� You can choose to download the  
new version or ignore it�  
UPnP (Universal Plug-and-Play) is yet another advanced feature offered  
by your Belkin Router� It is a technology that offers seamless operation  
of voice messaging, video messaging, games, and other applications  
that are UPnP-compliant� Some applications require the Router’s firewall  
to be configured in a specific way to operate properly� This usually  
requires opening TCP and UDP ports, and in some instances, setting  
trigger ports� An application that is UPnP-compliant has the ability to  
communicate with the Router, basically “telling” the Router which way  
it needs the firewall configured� The Router ships with the UPnP feature  
disabled� If you are using any applications that are UPnP-compliant, and  
wish to take advantage of the UPnP features, you can enable the UPnP  
feature� Simply select “Enable” in the “UPnP Enabling” section of the  
“Utilities” page� Click “Apply Changes” to save the change�  
G+ MIMO Wireless Router  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ManUally COnfIGURInG neTWORK seTTInGs  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Set up the computer that is connected to the cable or DSL modem FIRST using these steps� You can also use these steps to add computers to your  
Router after the Router has been set up to connect to the Internet�  
Manually Configuring network settings in Mac Os up to 9�x  
In order for your computer to properly communicate with your Router, you will need to change your Mac computer’s TCP/IP settings to DHCP�  
1�  
2�  
Pull down the Apple menu� Select “Control Panels” and select  
“TCP/IP”�  
4�  
If not already set, at “Configure:”, choose “Using DHCP Server”�  
This will tell the computer to obtain an IP address from the Router�  
You will see the TCP/IP control panel� Select “Ethernet Built-In” or  
“Ethernet” in the “Connect via:” drop-down menu (1)�  
(1)  
(2)  
5�  
Close the window� If you  
made any changes, the  
following window will  
appear� Click “Save”�  
3�  
Next to “Configure” (2), if  
“Manually” is selected, your  
Router will need to be set  
up for a static IP connection  
type� Write the address  
information in the table  
below� You will need to enter  
this information into the  
Router�  
Restart the computer� When the computer restarts, your network  
settings are now configured for use with the Router�  
G+ MIMO Wireless Router  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ManUally COnfIGURInG neTWORK seTTInGs  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Manually Configuring network adapters in Mac Os X v10�x  
1�  
2�  
Click on the “System  
Preferences” icon�  
(1)  
(2)  
(4)  
(3)  
Select “Network” from the “System Preferences” menu�  
3�  
4�  
Select “Built-in Ethernet” (1) next to “Show” in the “Network”  
menu�  
Select the “TCP/IP” tab (2)� Next to “Configure:” (3), you should see  
“Manually” or “Using DHCP”� If you do not, check the PPPoE tab  
(4) to make sure that “Connect using PPPoE” is NOT selected� If it  
is, you will need to configure your Router for a PPPoE connection  
type using your user name and password�  
G+ MIMO Wireless Router  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ManUally COnfIGURInG neTWORK seTTInGs  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
5�  
If “Manually” is selected,  
your Router will need to  
be set up for a static IP  
connection type� Write the  
address information in the  
table below� You will need  
to enter this information into  
the Router�  
(1)  
(2)  
(4)  
(3)  
6�  
If not already selected, select “Using DHCP” next to “Configure:”  
(3), then click “Apply Now”�  
your network adapter(s) are now configured for use with the Router�  
G+ MIMO Wireless Router  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ManUally COnfIGURInG neTWORK seTTInGs  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Manually Configuring network adapters in Windows 2000, nT, XP, or Vista  
1�  
2�  
Click “Start”, “Settings”, then “Control Panel”�  
Double-click on the “Network and dial-up connections” icon  
(Windows 2000) or the “Network” icon (Windows XP or Vista)�  
(1)  
(2)  
3�  
4�  
5�  
Right-click on the “Local Area Connection” associated with your  
network adapter and select “Properties” from the drop-down  
menu�  
In the “Local Area Connection Properties” window, click “Internet  
Protocol (TCP/IP)” and click the “Properties” button� The following  
screen will appear:  
(3)  
If “Use the following IP address” (2) is selected, your Router  
will need to be set up for a static IP connection type� Write the  
address information in the table below� You will need to enter this  
information into the Router�  
6�  
If not already selected, select “Obtain an IP address automatically”  
(1) and “Obtain DNS server address automatically” (3)� Click “OK”�  
your network adapter(s) are now configured for use with the Router�  
G+ MIMO Wireless Router  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ManUally COnfIGURInG neTWORK seTTInGs  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Manually Configuring network adapters in Windows 98se or Me  
1�  
2�  
3�  
Right-click on “My Network Neighborhood” and select “Properties”  
from the drop-down menu�  
6�  
7�  
Click the “DNS Configuration” tab (1)� Write the DNS address(es) in  
the chart�  
Select “TCP/IP -> settings” for your installed network adapter� You  
will see the following window�  
If not already selected, select “Obtain IP address automatically” in  
the “IP Address” tab� Click “OK”�  
Restart the computer� When the computer restarts, your network  
adapter(s) are now configured for use with the Router�  
If “Specify an IP address” is selected, your Router will need  
to be set up for a static IP connection type� Write the address  
information in the table below� You will need to enter this  
information into the Router�  
(1)  
(2)  
(3)  
4�  
5�  
Write in the IP address and subnet mask from the “IP Address” tab  
(3)�  
Click the “Gateway” tab (2)� Write the gateway address down in the  
chart�  
G+ MIMO Wireless Router  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ReCOMMended Web bROWseR seTTInGs  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
In most cases, you will not need to make any changes to your web browser’s settings� If you are having trouble accessing the Internet or the  
Web-Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section�  
Internet explorer 4�0 or Higher  
2�  
In the “Internet Options” screen, there are three selections: “Never  
dial a connection”, “Dial whenever a network connection is not  
present”, and “Always dial my default connection”� If you can make  
a selection, select “Never dial a connection”� If you cannot make a  
selection, go to the next step�  
1�  
Start your web browser� Select “Tools” then “Internet Options”�  
G+ MIMO Wireless Router  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ReCOMMended Web bROWseR seTTInGs  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
3�  
4�  
Under the “Internet Options” screen, click on “Connections” and  
select “LAN Settings…”�  
netscape® navigator® 4�0 or Higher  
1�  
2�  
Start Netscape� Click on “Edit” then “Preferences”�  
Make sure there are no check marks next to any of the displayed  
options: “Automatically detect settings”, “Use automatic  
configuration script”, and “Use a proxy server”� Click “OK”� Then  
click “OK” again in the “Internet Options” page�  
In the “Preferences” window, click on “Advanced” then select  
“Proxies”� In the “Proxies” window, select “Direct connection to  
the Internet”�  
G+ MIMO Wireless Router  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
Setup Assistant CD does not automatically start�  
solution:  
If the CD-ROM does not start the Setup Assistant automatically, it could be that the computer is running other applications that are interfering with  
the CD drive�  
1�  
If the Setup Assistant  
2� Next, double-click on the CD-ROM drive that the Setup Assistant  
Software CD has been placed in to start the installation�  
screen does not appear  
within 15–20 seconds, open  
up your CD-ROM drive  
by double-clicking on the  
“My Computer” icon that is  
located on your desktop�  
G+ MIMO Wireless Router  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
3�  
4�  
The Setup Assistant should start within a few seconds� If,  
instead, a window appears showing the files on the CD,  
double-click on the icon labeled “SetupAssistant”�  
If the Setup Assistant still does not start, reference  
the section titled “Manually Configuring Network  
Settings” (page 71) of this User Manual for an alternative  
setup method�  
G+ MIMO Wireless Router  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
Setup Assistant cannot find my Router�  
solution:  
If the Setup Assistant is not able to find the Router during the installation process, please check the following items:  
1�  
If the Setup Assistant is not able to find the Router during the  
installation process, there may be third-party firewall software  
installed on the computer attempting to access the Internet�  
Examples of third-party firewall software are ZoneAlarm, BlackICE  
PC Protection, McAfee Personal Firewall, and Norton Personal  
Firewall� If you do have firewall software installed on your  
3�  
Ensure that you have a cable connected between the network  
(Ethernet) port on the back of the computer and one of the “wired”  
ports on the back of the Router�  
note: The computer should NOT be connected to the port labeled “to  
Modem” on the back of the Router�  
computer, please make sure that you properly configure it� You can  
determine if the firewall software is preventing Internet access by  
temporarily turning it off� If, while the firewall is disabled, Internet  
access works properly, you will need to change the firewall settings  
to function properly when it is turned on� Please refer to the  
instructions provided by the publisher of your firewall software for  
instructions on configuring the firewall to allow Internet access�  
4�  
Try shutting down and restarting your computer, then rerunning the  
Setup Assistant�  
If the Setup Assistant is still unable to find the Router, reference  
the section titled “Manually Configuring Network Settings” for  
installation steps�  
2�  
Unplug power to the Router for 10 seconds, and then plug the  
power back into the Router� Ensure that the Router’s “router” LED  
is on; it should be solid GREEN� If not, check to make sure that  
the AC adapter is connected to the Router and plugged into a  
wall outlet�  
G+ MIMO Wireless Router  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
Problem:  
Setup Assistant cannot connect my Router to the Internet�  
The Setup Assistant completed installation, but my web browser  
doesn’t work�  
solution:  
I am unable to connect to the Internet� The “modem” LED on my  
Router is off, and the “internet” LED is blinking�  
If the Setup Assistant is not able to connect the Router to the Internet,  
please check the following items:  
1�  
2�  
Use the troubleshooting suggestions within the Setup Assistant�  
solution:  
If your ISP requires a user name and password, make sure that  
you have typed in your user name and password correctly� Some  
user names require that the ISP’s domain may be at the end of the  
name� Example: “myname@myisp�com”� The “@myisp�com” part of  
the user name may need to be typed as well as your user name�  
If you cannot connect to the Internet, and the “modem” LED is off, and  
the “internet” LED is blinking, the problem may be that your modem and  
Router are not connected properly�  
1�  
2�  
3�  
Make sure the network cable between the modem and the Router  
is connected� The cable should be connected at one end to the  
Router’s “to Modem” port, and at the other end to the network port  
on your modem�  
If you continue to have no Internet connection, reference the section  
titled “Manually Configuring Network Settings” (page 71 of this User  
Manual for an alternative setup method)�  
Unplug the cable or DSL modem from its power source for three  
minutes� After three minutes, plug the modem back into its power  
source� This may force the modem to properly recognize the  
Router�  
Unplug the power to your Router, wait 10 seconds, and then  
reconnect the power� This will cause the Router to reattempt  
communication with the modem� If the “modem” LED on the  
Router is not lit after completing these steps, please contact Belkin  
Technical Support�  
4�  
Try shutting down and restarting your computer�  
G+ MIMO Wireless Router  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
Problem:  
The Setup Assistant completed installation, but my web browser  
doesn’t work�  
The Setup Assistant completed, but my web browser doesn’t work�  
I am unable to connect to the Internet� The “modem” LED on my  
Router is blinking, and the “internet” LED is solid�  
I am unable to connect to the Internet� The “modem” LED on my  
Router is on, and the “internet” LED is blinking�  
solution:  
solution:  
1�  
2�  
3�  
If the “modem” LED is blinking, and the “internet” LED is solid,  
1�  
If you cannot connect to the Internet, the “modem” LED is on,  
and the “internet” LED is blinking, the problem may be that your  
connection type may not match the ISP’s connection�  
but you are unable to access the Internet, there may be third-  
party firewall software installed on the computer attempting to  
access the Internet� Examples of third-party firewall software are  
ZoneAlarm, BlackICE PC Protection, McAfee Personal Firewall, and  
Norton Personal Firewall�  
2�  
If you have a “static IP address” connection, your ISP must assign  
you the IP address, subnet mask, and gateway address� Please  
refer to the section entitled “Alternate Setup Method” for details on  
changing this setting�  
If you do have firewall software installed on your computer, please  
make sure that you properly configure it� You can determine if  
the firewall software is preventing Internet access by temporarily  
turning it off� If, while the firewall is disabled, Internet access works  
properly, you will need to change the firewall settings to function  
properly when it is turned on�  
3�  
4�  
If you have a “PPPoE” connection, your ISP will assign you a user  
name and password and sometimes a service name� Make sure the  
Router’s connection type is configured to PPPoE and the settings  
are entered properly� Please refer to the section entitled “Alternate  
Setup Method” for details on changing this setting�  
Please refer to the instructions provided by the publisher of your  
firewall software for instructions on configuring the firewall to allow  
Internet access�  
You may need to configure your Router to meet the specific  
requirements of your ISP� To search our knowledge base for  
ISP-specific issues, go to: http://web�belkin�com/support and type  
in “ISP”�  
If you are still unable to access the Internet after disabling any firewall  
software, please contact Belkin Technical Support�  
If you are still unable to access the Internet after verifying these settings,  
please contact Belkin Technical Support�  
G+ MIMO Wireless Router  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
I can’t connect to the Internet wirelessly�  
solution:  
If you are unable to connect to the Internet from a wireless computer, please check the following items:  
1�  
Look at the lights on your Router� If you’re using a Belkin Router,  
the lights should be as follows:  
3�  
The exact window that opens will vary depending on the model of  
wireless card you have; however, any of the utilities should have  
a list of “Available Networks”—those wireless networks it can  
connect to�  
*
The “router” LED should be on�  
The “modem” LED should be on, and not blinking�  
The “internet” LED should be on, and not blinking�  
The “wireless” LED should be on, not blinking�  
does the name of your wireless network appear in the results?  
Yes, my network name is listed—go to the troubleshooting solution  
titled “I can’t connect to the Internet wirelessly, but my network name  
is listed”�  
2�  
Open your wireless utility software by clicking on the icon in the  
system tray at the bottom, right-hand corner of the screen�  
No, my network name is not listed—go to the troubleshooting solution  
titled “I can’t connect to the Internet wirelessly, and my network name is  
not listed”�  
G+ MIMO Wireless Router  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
Problem:  
I can’t connect to the Internet wirelessly, but my network name is listed�  
I can’t connect to the Internet wirelessly, and my network name is  
not listed�  
solution:  
solution:  
If the name of your network is listed in the “Available Networks” list,  
please follow the steps below to connect wirelessly:  
If the correct network name is not listed under “Available Networks” in  
the wireless utility, please attempt the following troubleshooting steps:  
1�  
2�  
Click on the correct network name in the “Available Networks” list�  
1�  
2�  
Temporarily move computer, if possible, five to 10 feet from the  
Router� Close the wireless utility, and reopen it� If the correct  
network name now appears under “Available Networks”, you may  
have a range or interference problem� Please see the suggestions  
discussed in the section titled “Placement of your G+ MIMO  
Router” of this User Manual�  
If the network has security (encryption) enabled, you will need to  
enter the network key� For more information regarding security, see  
the section entitled “Changing the Wireless Security Settings”�  
3�  
Within a few seconds, the tray icon in the lower, right-hand corner  
of your screen should turn green, indication of a successful  
connection to the network�  
Using a computer that is connected to the Router via a network  
cable (as opposed to wirelessly), ensure that “Broadcast SSID” is  
enabled� This setting is found on the Router’s wireless “Channel  
and SSID” configuration page�  
If you are still unable to access the Internet after completing these steps,  
please contact Belkin Technical Support�  
G+ MIMO Wireless Router  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
• My wireless network performance is inconsistent.  
• Data transfer is sometimes slow.  
• Signal strength is poor.  
• Difficulty establishing and/or maintaining a Virtual Private Network (VPN) connection.  
solution:  
limiting the wireless transmit rate—Limiting the wireless transmit rate  
can help improve the maximum wireless range and connection stability�  
Most wireless cards have the ability to limit the transmission rate� To  
change this property, go to the Windows Control Panel, open “Network  
Connections” and double-click on your wireless card’s connection� In  
the properties dialog, select the “Configure” button on the “General” tab  
(Windows 98 users will have to select the wireless card in the list box  
and then click “Properties”), then choose the “Advanced” tab and select  
the rate property�  
Wireless technology is radio-based, which means connectivity and  
the throughput performance between devices decreases when the  
distance between devices increases� Other factors that will cause signal  
degradation (metal is generally the worst culprit) are obstructions such  
as walls and metal appliances� Note also that connection speed may  
decrease as you move farther away from the Router�  
In order to determine if wireless issues are related to range, we suggest  
temporarily moving the computer, if possible, five to 10 feet from the  
Router�  
Wireless client cards are usually set to automatically adjust the wireless  
transmit rate for you, but doing so can cause periodic disconnects when  
the wireless signal is too weak; as a rule, slower transmission rates are  
more stable� Experiment with different connection rates until you find the  
best one for your environment� Note that all available transmission rates  
should be acceptable for browsing the Internet� For more assistance,  
see your wireless card’s user manual�  
Changing the wireless channel—Depending on local wireless traffic  
and interference, switching the wireless channel of your network can  
improve performance and reliability� The default channel the Router  
is shipped with is channel 11; you may choose from several other  
channels depending on your region� See the section on page 40 entitled  
“Changing the Wireless Channel” for instructions on how to choose  
other channels�  
G+ MIMO Wireless Router  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
I am having difficulty setting up Wired Equivalent Privacy (WEP) security on my Belkin Router�  
solution:  
1�  
Log into your Router�  
For example:  
C3 03 0f af 4b b2 C3 d4 4b C3 d4 e7 e4 = 128-bit key  
Open your web browser and type in the IP address of the Router� (The  
Router’s default is 192�168�2�1�) Log into your Router by clicking on the  
“Login” button in the top right-hand corner of the screen� You will be  
asked to enter your password� If you never set a password, leave the  
“Password” field blank and click “Submit”�  
4�  
Click “Apply Changes” to finish� Encryption in the Wireless Router  
is now set� Each of your computers on your wireless network will  
now need to be configured with the same security settings�  
Click the “Wireless” tab on the left of your screen� Select the  
“Encryption” or “Security” tab to get to the security settings page�  
WaRnInG: If you are configuring the Wireless Router or Access Point  
from a computer with a wireless client, you will need to ensure that  
security is turned on for this wireless client� If this is not done, you will  
lose your wireless connection�  
2�  
3�  
Select “128-bit WEP” from the drop-down menu�  
note to Mac users: Original Apple AirPort products support 64-bit  
encryption only� Apple AirPort 2 products can support 64-bit or 128-  
bit encryption� Please check your Apple AirPort product to see which  
version you are using� If you cannot configure your network with 128-bit  
encryption, try 64-bit encryption�  
After selecting your WEP encryption mode, you can type in your  
hex WEP key manually, or you can type in a passphrase in the  
“Passphrase” field and click “Generate” to create a WEP key from  
the passphrase� Click “Apply Changes” to finish� You must now set  
all of your clients to match these settings� A hex (hexadecimal) key  
is a mixture of numbers and letters from A-F and 0-9� For 128-bit  
WEP, you need to enter 26 hex keys�  
G+ MIMO Wireless Router  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin client card�  
solution:  
The client card must use the same key as the Router� For instance, if your Router uses the key 00112233445566778899AABBCC, then the client card  
must be set to the exact same key�  
1�  
2�  
3�  
Double-click the Signal Indicator icon to bring up the “Wireless  
Network” screen�  
6�  
Ensure that the check box “The key is provided for me  
automatically” at the bottom is unchecked� If you are using this  
computer to connect to a corporate network, please consult your  
network administrator if this box needs to be checked�  
The “Advanced” button will allow you to view and configure more  
options of your card�  
7�  
Type your WEP key in the “Network key” box�  
Once the “Advanced” button is clicked, the Belkin Wireless LAN  
Utility will appear� This Utility will allow you to manage all the  
advanced features of the Belkin Wireless Card�  
Important: A WEP key is a mixture of numbers and letters from A-F and  
0-9� For 128-bit WEP, you need to enter 26 keys� This network key needs  
to match the key you assign to your Router�  
4�  
5�  
Under the “Wireless Network Properties” tab, select a network  
name from the “Available Networks” list and click the “Properties”  
button�  
For example:  
C3 03 0f af 4b b2 C3 d4 4b C3 d4 e7 e4 = 128-bit key  
8�  
Click “OK”, and then “Apply” to save the settings�  
Under “Data Encryption”, select “WEP”�  
If you are not using a Belkin wireless client card, please consult the  
manufacturer’s user manual for that wireless client card�  
G+ MIMO Wireless Router  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
Problem:  
Do Belkin products support WPA/WPA2?  
I am having difficulty setting up Wireless Protected Access (WPA)  
security on my Belkin Router for a home network�  
solution:  
solution:  
To use WPA security, all your clients must be upgraded to drivers and  
software that support it� At the time of this FAQ publication, a security  
patch download is available, for free, from Microsoft� This patch works  
only with the Windows XP operating system� Download the patch here:  
Download the patch here: http://www�microsoft�com/downloadS/details�  
aspx?FamilyID=662bb74d-e7c1-48d6-95ee-1459234f4483  
1�  
From the “Security Mode” drop-down menu, select “WPA-PSK (no  
server)”�  
2�  
Enter your pre-shared key� This can be from eight to 63 characters  
and can be letters, numbers, symbols, or spaces� This same key  
must be used on all of the clients that you set up� For example,  
your PSK might be something like: “Smith family network key”�  
You also need to download the latest driver for your Belkin 80211g  
Wireless Desktop or Notebook Network Card from the Belkin support  
site� Other operating systems are not supported at this time� Microsoft’s  
patch only supports devices with WPA-enabled drivers such as Belkin  
802�11g products�  
3�  
Click “Apply Changes” to finish� You must now set all clients to  
match these settings�  
Download the latest driver at http://www�belkin�com/support  
G+ MIMO Wireless Router  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
I am having difficulty setting up Wireless Protected Access (WPA) security on a Belkin wireless client card for a home network�  
solution:  
Clients must use the same key that the G Wireless Router or access point uses� For instance, if the key is “Smith Family Network Key” in the G  
Wireless Router or access point, the clients must also use that same key�  
1�  
2�  
3�  
Double-click the “Signal Indicator” icon to bring up the “Wireless  
Network Utility” screen� The “Advanced” button will allow you to  
view and configure more options of your client card�  
4�  
Under “Network Authentication”, select “WPA-PSK (no server)”�  
5�  
Type your WPA key in the “Network key” box�  
Important: WPA-PSK is a combination of numbers and letters from  
A-Z and 0-9� For WPA-PSK, you can enter eight to 63 characters� This  
network key needs to match the key you assign to your Router�  
Once the “Advanced” button is clicked, the Belkin Wireless Utility  
will appear� This Utility will allow you to manage all the advanced  
features of the Belkin wireless card�  
6�  
Click “OK”, then “Apply” to save the settings�  
Under the “Wireless Network Properties” tab, select a  
network name from the “Available Networks” list and click the  
“Properties” button�  
G+ MIMO Wireless Router  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Problem:  
I am NOT using a Belkin client card for a home network and I am having difficulty setting up Wireless Protected Access (WPA) security�  
solution:  
If you are not using a Belkin Wireless Desktop or Wireless Notebook Network Card that is not equipped with WPA-enabled software, a file from  
Microsoft called “Windows XP Support Patch for Wireless Protected Access” is available for free download� Download the patch from Microsoft by  
searching the knowledge base for Windows XP WPA�  
note: The file that Microsoft has made available works only with Windows XPOther operating systems are not supported at this time� You also need  
to ensure that the wireless card’s manufacturer supports WPA and that you have downloaded and installed the latest driver from their support site�  
Supported Operating Systems:  
1�  
Under Windows XP, click  
“Start > Control Panel >  
Network Connections”�  
2�  
Right-clicking on the  
“Wireless Networks” tab will  
display the following screen�  
Ensure the “Use Windows  
to configure my wireless  
network settings” check box  
is checked�  
Windows XP Professional  
Windows XP Home Edition  
G+ MIMO Wireless Router  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
3�  
Under the “Wireless  
Networks” tab, click the  
“Configure” button and you  
will see the following screen�  
4�  
For a home or small  
business user, select  
“WPA-PSK” under  
5�  
Type in your encryption key  
in the “Network key” box�  
Important: Enter your pre-shared  
key� This can be from eight to 63  
characters and can be letters,  
numbers, or symbols� This same  
key must be used on all of the  
clients that you set up�  
“Network Administration”�  
note: Select WPA (with radius  
server) if you are using this  
computer to connect to a  
corporate network that supports  
an authentication server such as  
a radius server� Please consult  
your network administrator for  
further information�  
6�  
Click “OK” to apply settings�  
G+ MIMO Wireless Router  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
What’s the difference between 802�11g and draft 80211n?  
Currently there are three commonly used wireless networking standards,  
which transmit data at very different maximum speeds� Each is based  
on the designation for certifying network standards� The most common  
wireless networking standard, 80211g, can transmit information up  
to 54Mbps; 802�11a also supports up to 54Mbps, but in the 5GHz  
frequency; and 80211n draft specification can connect at up to  
300Mbps� See the following chart for more detailed information�  
Wireless  
Technology  
G
G Plus MIMO  
n MIMO  
n1 MIMO  
(802�11g)  
(802�11g with  
MIMO MRC)  
(draft 802�11n  
with MIMO)  
(draft 802�11n  
with MIMO)  
speed*  
Up to 54Mbps*  
Up to 54Mbps*  
Up to 300Mbps*  
Up to 300Mbps*  
frequency  
Common  
Common  
Common  
Common  
household  
household  
household  
household  
devices such as  
cordless phones  
and microwave  
ovens may  
devices such as  
devices such as  
cordless phones  
and microwave  
ovens may  
devices such as  
cordless phones  
and microwave  
ovens may  
cordless phones  
and microwave  
ovens may  
interfere with  
the unlicensed  
band 2�4GHz  
interfere with  
the unlicensed  
band 2�4GHz  
interfere with  
the unlicensed  
band 2�4GHz  
interfere with  
the unlicensed  
band 2�4GHz  
Compatibility  
Compatible with  
802�11b/g  
Compatible with  
802�11b/g  
Compatible with  
draft 80211n**  
and 802�11b/g  
Compatible with  
draft 80211n**  
and 802�11b/g  
Coverage*  
Up to 400 ft�*  
Up to 1,000 ft�*  
Up to 1,200 ft�*  
Up to 1,400 ft�*  
advantage  
Common—  
widespread  
use for Internet  
sharing  
Better coverage  
and consistent  
speed and  
Enhanced  
speed and  
coverage  
Leading edge—  
best coverage  
and throughput  
range  
*Distance and connection speeds will vary depending on your networking environment�  
Technical support  
You can find technical support information at http://www�belkin�com/  
networking or www�belkin�com/support/�  
G+ MIMO Wireless Router  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
free Tech support* *National call rates may apply www�belkin�com  
COUnTRy  
AUSTRIA  
nUMbeR  
0820 200766  
07 07 00 073  
239 000 406  
701 22 403  
InTeRneT adRess  
www�belkin�com/uk/networking/  
www�belkin�com/nl/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/fr/networking/  
www�belkin�com/de/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/it/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/nl/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/es/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/uk/networking/  
www�belkin�com/uk/networking/  
BELGIUM  
You can find additional support information on our website www�belkin�  
com through the tech-support area� If you want to contact technical  
support by phone, please call the number you need from this list*�  
CZECH REPUBLIC  
DENMARK  
FINLAND  
00800 - 22 35 54 60  
08 - 25 54 00 26  
0180 - 500 57 09  
00800 - 44 14 23 90  
06 - 17 77 49 06  
800 8534  
FRANCE  
GERMANY  
GREECE  
HUNGARY  
ICELAND  
IRELAND  
0818 55 50 06  
ITALY  
02 - 69 43 02 51  
34 20 80 85 60  
LUXEMBOURG  
NETHERLANDS  
NORWAY  
0900 - 040 07 90 €010 per minute  
81 50 0287  
POLAND  
00800 - 441 17 37  
707 200 676  
PORTUGAL  
RUSSIA  
495 580 9541  
SOUTH AFRICA  
SPAIN  
0800 - 99 15 21  
902 - 02 43 66  
SWEDEN  
07 - 71 40 04 53  
08 - 48 00 02 19  
0845 - 607 77 87  
SWITZERLAND  
UNITED KINGDOM  
OTHER COUNTRIES  
+44 - 1933 35 20 00  
G+ MIMO Wireless Router  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InfORMaTIOn  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
fCC statement  
deClaRaTIOn Of COnfORMITy WITH fCC RUles fOR eleCTROMaGneTIC COMPaTIbIlITy  
We, Belkin International, Inc�, of 501 West Walnut Street, Compton, CA  
90220, declare under our sole responsibility that the device,  
federal Communications Commission notice  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules� These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation�  
f5d9231-4v1  
complies with Part 15 of the FCC Rules� Operation is subject to  
the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation�  
This equipment generates, uses, and can radiate radio frequency  
energy, and if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications� However,  
there is no guarantee that interference will not occur in a particular  
installation� If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment  
off and on, the user is encouraged to try and correct the interference by  
one or more of the following measures:  
Caution: exposure to Radio frequency Radiation  
The device shall be used in such a manner that the potential for human  
contact during normal operation is minimized�  
This equipment complies with FCC radiation exposure limits set forth for  
an uncontrolled environment� This equipment should be installed and  
operated with a minimum distance of 20cm between the radiator and  
your body�  
Reorient or relocate the receiving antenna�  
Increase the distance between the equipment and the receiver�  
Connect the equipment to an outlet on a circuit different from that  
to which the receiver is connected�  
Consult the dealer or an experienced radio/TV technician for help�  
For IEEE 802�11b/g products in the USA market, only channels 1 through  
11 can be operated� Selection of other channels is not possible�  
This device and its antenna(s) must not be co-located or operating in  
conjunction with any other antenna or transmitter�  
G+ MIMO Wireless Router  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InfORMaTIOn  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Modifications  
europe-european Union notice  
The FCC requires the user to be notified that any changes or  
modifications to this device that are not expressly approved by  
Belkin International, Inc�, may void the user’s authority to operate the  
equipment�  
Radio products with the CE 0682 or CE alert marking comply with  
the R&TTE Directive (1995/5/EC) issued by the Commission of the  
European Community�  
Compliance with this directive implies conformity to the following  
European Norms (in brackets are the equivalent international standards)�  
EN 60950-1 (IEC60950) – Product Safety  
Canada-Industry Canada (IC)  
EN 300 328 Technical requirement for radio equipment  
EN 301 489 General EMC requirements for radio equipment�  
The wireless radio of this device complies with RSS139 and RSS 210  
Industry Canada� This Class B digital apparatus complies with Canadian  
ICES-003�  
To determine the type of transmitter, check the identification label on  
your Belkin product�  
Operation is subject to the following two conditions:  
Products with the CE marking comply with the EMC Directive (89/336/  
EEC) and the Low Voltage Directive (72/23/EEC) issued by the  
Commission of the European Community� Compliance with these  
directives implies conformity to the following European Norms (in  
brackets are the equivalent international standards)�  
1)  
2)  
this device may not cause interference, and  
this device must accept any interference, including interference  
that may cause undesired operation of the device�  
Cet appareil numérique de la classe B conforme á la norme NMB-003  
du Canada�  
EN 55022 (CISPR 22) – Electromagnetic Interference  
EN 55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic Immunity  
EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics  
EN 61000-3-3 (IEC610000) – Power Line Flicker  
EN 60950-1 (IEC60950-1) – Product Safety  
Products that contain the radio transmitter are labeled with CE 0682 or  
CE alert marking and may also carry the CE logo�  
G+ MIMO Wireless Router  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InfORMaTIOn  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
belkin International, Inc�, limited lifetime Product Warranty  
What this warranty covers�  
as flood, earthquake, lightning, war, vandalism, theft, normal-use wear  
and tear, erosion, depletion, obsolescence, abuse, damage due to low  
voltage disturbances (i�e� brownouts or sags), non-authorized program,  
or system equipment modification or alteration�  
Belkin International, Inc� (“Belkin”) warrants to the original purchaser of  
this Belkin product that the product shall be free of defects in design,  
assembly, material, or workmanship�  
How to get service�  
To get service for your Belkin product you must take the following steps:  
What the period of coverage is�  
Belkin warrants the Belkin product for the lifetime of the product�  
1� Contact Belkin Limited by calling the technical support department  
on the numbers found earlier in this manual, within 15 days of the  
Occurrence� Be prepared to provide the following information:  
What will we do to correct problems?  
a� The part number of the Belkin product�  
b� Where you purchased the product�  
c� When you purchased the product�  
d� Copy of original receipt�  
Product Warranty�  
Belkin will repair or replace, at its option, any defective product free of  
charge (except for shipping charges for the product)� Belkin reserves the  
right to discontinue any of its products without notice, and disclaims any  
limited warranty to repair or replace any such discontinued products�  
In the event that Belkin is unable to repair or replace the product (for  
example, because it has been discontinued), Belkin will offer either a  
refund or a credit toward the purchase of another product from Belkin�  
com in an amount equal to the purchase price of the product as  
evidenced on the original purchase receipt as discounted by its natural  
use�  
2� Your Belkin Customer Service Representative will then instruct you on  
how to forward your receipt and Belkin product and how to proceed  
with your claim�  
What is not covered by this warranty?  
All above warranties are null and void if the Belkin product is not  
provided to Belkin for inspection upon Belkin’s request at the sole  
expense of the purchaser, or if Belkin determines that the Belkin product  
has been improperly installed, altered in any way, or tampered with�  
The Belkin Product Warranty does not protect against acts of God such  
G+ MIMO Wireless Router  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InfORMaTIOn  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
Belkin reserves the right to review the damaged Belkin product� All  
costs of shipping the Belkin product to Belkin for inspection shall be  
borne solely by the purchaser� If Belkin determines, in its sole discretion,  
that it is impractical to ship the damaged equipment to Belkin, Belkin  
may designate, in its sole discretion, an equipment repair facility to  
inspect and estimate the cost to repair such equipment� The cost, if any,  
of shipping the equipment to and from such repair facility and of such  
estimate shall be borne solely by the purchaser� Damaged equipment  
must remain available for inspection until the claim is finalized�  
Whenever claims are settled, Belkin reserves the right to be subrogated  
under any existing insurance policies the purchaser may have�  
How state law relates to the warranty�  
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN�  
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS  
REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY  
OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY,  
ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY�  
Some states do not allow limitations on how long an implied warranty  
lasts, so the above limitations may not apply to you�  
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,  
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH  
AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING  
OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES�  
This warranty gives you specific legal rights, and you may also have  
other rights, which may vary from state to state� Some states do not  
allow the exclusion or limitation of incidental, consequential, or other  
damages, so the above limitations may not apply to you�  
G+ MIMO Wireless Router  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InfORMaTIOn  
table of contents  
sections  
1
2
3
4
5
6
7
8
9
10  
EU DECLARATION OF CONFORMITY  
[Belkin Ltd] vakuuttaa täten että [F5D9231-4] tyyppinen laite on direktiivin 1999/5/EY oleellisten  
Suomi  
[Finnish]  
vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.  
[Belkin Ltd] tímto prohlašuje, že tento [F5D9231-4] je ve shodČ se základními požadavky a  
dalšími pĜíslušnými ustanoveními smČrnice 1999/5/ES.  
ýesky  
[Czech]  
Härmed intygar Belkin Ltd] att denna [F5D9231-4] står I överensstämmelse med de väsentliga  
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.  
Svenska  
[Swedish]  
Dansk  
[Danish]  
Undertegnede [Belkin Ltd] erklærer herved, at følgende udstyr [F5D9231-4] overholder de  
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.  
Íslenska  
[Icelandic]  
Hér með lýsir [Belkin Ltd] yfir því að [F5D9231-4] er í samræmi við grunnkröfur og aðrar kröfur,  
sem gerðar eru í tilskipun 1999/5/EC.  
Hiermit erklärt [Belkin Ltd], dass sich das Gerät [F5D9231-4] in Übereinstimmung mit den  
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie  
1999/5/EG befindet.  
Deutsch  
[German]  
[Belkin Ltd] erklærer herved at utstyret [F5D9231-4] er i samsvar med de grunnleggende krav  
og øvrige relevante krav i direktiv 1999/5/EF.  
Norsk  
[Norwegian]  
Eesti  
Käesolevaga kinnitab [Belkin Ltd] seadme [F5D9231-4] vastavust direktiivi 1999/5/EÜ  
põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.  
[Estonian]  
http://www�belkin�com/doc/  
Hereby, [Belkin Ltd], declares that this [F5D9231-4] is in compliance with the essential  
English  
requirements and other relevant provisions of Directive 1999/5/EC.  
Por medio de la presente [Belkin Ltd] declara que el [F5D9231-4] cumple con los requisitos  
Español  
[Spanish]  
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.  
ȂǼ ȉǾȃ ȆǹȇȅȊȈǹ [Belkin Ltd] ǻǾȁȍȃǼǿ ȅȉǿ [F5D9231-4] ȈȊȂȂȅȇĭȍȃǼȉǹǿ ȆȇȅȈ ȉǿȈ  
ȅȊȈǿȍǻǼǿȈ ǹȆǹǿȉǾȈǼǿȈ Ȁǹǿ ȉǿȈ ȁȅǿȆǼȈ ȈȋǼȉǿȀǼȈ ǻǿǹȉǹȄǼǿȈ ȉǾȈ ȅǻǾīǿǹȈ 1999/5/ǼȀ.  
ǼȜȜȘȞȚțȒ  
[Greek]  
Par la présente [Belkin Ltd] déclare que l'appareil [F5D9231-4] est conforme aux exigences  
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.  
Français  
[French]  
Con la presente [Belkin Ltd] dichiara che questo [F5D9231-4] è conforme ai requisiti essenziali  
ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.  
Italiano  
[Italian]  
For information on product disposal please refer to  
http://environmental�belkin�com  
Latviski  
[Latvian]  
Ar šo [Belkin Ltd Belkin Ltd ] deklarƝ, ka [F5D9231-4 / iekƗrtas tips] atbilst DirektƯvas 1999/5/EK  
bnjtiskajƗm prasƯbƗm un citiem ar to saistƯtajiem noteikumiem.  
Šiuo [Belkin Ltd] deklaruoja, kad šis [F5D9231-4] atitinka esminius reikalavimus ir kitas  
Lietuviǐ  
[Lithuanian]  
1999/5/EB Direktyvos nuostatas.  
Hierbij verklaart [Belkin Ltd] dat het toestel [F5D9231-4l] in overeenstemming is met de  
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.  
Nederlands  
[Dutch]  
Hawnhekk, [Belkin Ltd], jiddikjara li dan [F5D9231-4] jikkonforma mal-ƫtiƥijiet essenzjali u ma  
provvedimenti oƫrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.  
Malti  
[Maltese]  
Alulírott, [Belkin Ltd] nyilatkozom, hogy a [F5D9231-4] megfelel a vonatkozó alapvetõ  
Magyar  
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.  
[Hungarian]  
At  
LU  
Ro  
Be  
Mt  
tR  
cY  
nL  
cZ  
PL  
DK  
Pt  
ee  
sK  
Fi  
si  
FR  
es  
De  
se  
GR  
GB  
HU  
is  
ie  
Li  
FoR Use in  
Polski  
[Polish]  
Niniejszym [Belkin Ltd] oĞwiadcza, Īe [F5D9231-4] jest zgodny z zasadniczymi wymogami oraz  
pozostaáymi stosownymi postanowieniami Dyrektywy 1999/5/EC.  
it  
LV  
Lt  
[Belkin Ltd] declara que este [F5D9231-4] está conforme com os requisitos essenciais e outras  
disposições da Directiva 1999/5/CE.  
Português  
[Portuguese]  
no  
cH  
BG  
oPeRAtes on cHAnneLs 1-13  
Slovensko  
[Slovenian]  
[I Belkin Ltd] izjavlja, da je ta [F5D9231-4] v skladu z bistvenimi zahtevami in ostalimi  
relevantnimi doloþili direktive 1999/5/ES.  
Restricted Use in certain countries  
class 2 equipment  
[Belkin Ltd] týmto vyhlasuje, že [F5D9231-4] spĎĖa základné požiadavky a všetky príslušné  
ustanovenia Smernice 1999/5/ES.  
Slovensky  
[Slovak]  
G+ MIMO Wireless Router  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Belkin Ltd.  
Belkin SAS  
Belkin GmbH  
Hanebergstrasse 2  
80637 Munich  
Germany  
Express Business Park  
Shipton Way, Rushden  
NN10 6GL, United Kingdom  
130 rue de Silly  
92100 Boulogne-Billancourt,  
France  
Belkin Iberia  
Belkin Italy & Greece  
Via Carducci, 7  
Milano 20123  
Italy  
Belkin B.V.  
C/ Anabel Segura, 10 planta baja, Of. 2  
28108, Alcobendas, Madrid  
Spain  
Boeing Avenue 333  
1119 PH Schiphol-Rijk,  
Netherlands  
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of  
respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and AppleTalk are trademarks of Apple  
Inc., registered in the U.S. and other countries. Windows, Windows Vista, NT, and Microsoft are either  
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries  
.
PM01116ea F5D9231-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bissell Carpet Cleaner 90Y5 User Manual
Black Decker Iron BDCMTS User Manual
Black Decker Oven TRO300 User Manual
Bosch Appliances Home Security System D1260 User Manual
Bose Home Theater System AM353759 User Manual
Brother Printer 5050 User Manual
Bush Hog Lawn Mower Commercial Series User Manual
Casio Watch 0811 EA User Manual
Char Broil Charcoal Grill 08401504 A1 User Manual
Christie Digital Systems Projector DHD555 GS User Manual