Play
WIRELESS ROUTER WITH BUILT-IN MODEM
User Manual
8820au00398 F7D4402au
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
What’s in the Box
Initial Setup
Play Wireless Modem-Router
ADSL cable (attached to router)
Power supply (attached to router)
Ethernet Cable
Where to Place Your Router
For the best results, place the Router in an open location
away from large metal objects and magnets such as those
found in speakers. Raising the Router above floor level
can improve the strength of your wireless signal.
Network information card (attached to router)
Belkin Setup CD with User Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
How to Set It Up
2
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
1. Connect your Router’s ADSL cable to your ADSL connection.
If you are replacing an existing Router or gateway, this may
require unplugging the existing gateway.
Note: If a telephone is connected to the same telephone jack
then an ADSL Splitter/Filter is required.This can be
purchased from your local retailer.
2. Plug the Router’s power supply into a wall outlet.
3. Put the CD into your computer. If the CD doesn’t
open automatically, please browse to your CD drive
and double-click on the Belkin Setup CD icon.
Setup
4. Click the Setup icon on the CD menu.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
5 After a brief installation, the setup software will ask you
for the network name and password from the network
information card that is attached to your Router Store the
card under the base of your Router for future reference
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
6 A progress screen will appear while additional software is
installed This may take a few minutes to complete Once
finished, a “Success” message will appear indicating that you
are connected to the Internet via your new Belkin Router
During setup you may be asked for additional information
You may need to enter a username and password provided
by your ISP This username and password is likely to be
found on materials that came from your ISP when you
signed up for service If necessary, you may need to contact
your ISP to retrieve your username and password
If you have a static IP address, you may need to enter
additional information also provided by your ISP
If your computer doesn’t have a wireless adapter, or the
setup software is unable to control it, you may be asked to
connect your computer to the Router with a network cable
If the setup software is unable to detect your VCI and VPI
settings based on your country, you may also need to enter
this information Your ISP is likely to have provided it
7
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
advanced Tools & settings
After the initial setup is complete, you have the option to
change settings like your network name, security type, and
password To make these changes and others, click on the
Advanced Tools icon at the CD Setup menu and select one
of the following settings that you would like to change:
network name & security – Personalize your network name
(SSID), password, and strength of wireless security
Internet service Provider & login settings – Have
you moved or changed Internet Service Providers?
If you’d like to change these settings without running
through the setup process again, this is the place
8
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
The belkin Router Manager
The Belkin Router Manager appears in your system tray
(Windows) or menu bar (Mac) Its icon indicates the current
status of your Router and also allows you to access your
Router’s settings to make changes It also provides quick
access to software that came bundled with your Router
Belkin.2234
Router Settings
User Manual
To access the Router settings, click on the icon
and select from the menu that appears
The status of your Router is shown by the Belkin Router Manager
icon, which closely mimics the light on the front of the Router
USB Print & Storage Manager
Memory Safe: Get Started!
Green: You are connected to your Belkin Router
and it is connected to the Internet
amber: You are connected to your Belkin Router,
but it is not connected to the Internet
Daily DJ: Get Started!
Music Labeler
Check for Updates
Options
Exit
9
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
Manual setup Using Your browser
in anything else such as “www”) Then press the Enter key If
you’re still having trouble running the manual setup option, type
“192 168 2 1” in your browser (you do not need to type in anything
10
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
Using the CD
adding Computers to Your network
1 Put the Setup CD into your computer If the CD
doesn’t open automatically, browse to your CD
drive and open the Belkin Setup CD icon
Wireless devices such as computers, network printers, and gaming
systems can connect to your Router with a few simple steps
2 Click the Setup icon on the CD menu
3 After a brief installation, the setup software will ask you for the
network name and password from the network information card
that came with your Router This card is most likely now located
underneath the foot of your Router in the provided card slot
4 A progress screen will appear while additional software is
installed This may take a few minutes to complete Once
finished, a “Success” message will appear indicating that you
are connected to the Internet via your new Belkin Router
note: The setup software runs only on
Windows and Mac OS X systems
11
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
Manually
Using the WPs button
If you choose not to use the included Setup CD for
adding additional computers or wireless devices, you
can manually add these items to your network
1 Start WPS Push Button Connection (WPS PBC) on your
computer or other Wi-Fi device that you would like to connect
wirelessly to your Router Often there will be a button for this
purpose in software that came with the device, or a physical
“WPS,” “PBC,” or “Security” button on the device itself
1 Locate the wireless-network-connections option
on your computer or wireless device
2 Within two minutes, press the WPS button on your Router
2 Select your Belkin Router from the list of available networks You
can identify your Belkin Router by locating the network name
(SSID) from the card located underneath the foot of your Router
The WPS light (small light above WPS button) will blink green while
it listens for your Wi-Fi device Once a connection is established, the
light will turn green and then go out If a connection is not established,
the light will blink amber You may repeat the process to try again
3 Enter your network password (located on
your network information card)
You can repeat this process for each WPS-enabled
Your wireless device will take a few moments to connect to your
network If the connection is not made the first time, try this
process again If you still have difficulty connecting to your network
after trying this process a few times, see the “Troubleshooting”
section in this manual for help with connecting to your network
device you’d like to add to your network
note: In some cases you may be prompted to select the
security type It is printed on the card for your convenience
12
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
adding Usb Devices
13
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
adding a Drive
adding a Printer
You can share a USB hard drive or flash drive to your network via
your Router’s USB port Once connected, you can share files and
music with other computers and devices within your network
You can add a printer to your network via your Router’s
USB port Once connected, you can print from various
computers and wireless devices within your network
Plug your USB hard drive into the USB port on the back
of your Router When the light above the USB port is lit,
your drive is available to computers on your network
Plug your printer’s USB cable into the USB port located on
the back of your Router When the light above the USB port is
lit, your printer is available to computers on your network
You can manually check the status of your shared drive by visiting
the USB Print and Storage Manager, found under the Belkin Router
Manager icon displayed in your system tray (Windows) or menu
bar (Mac) If you have difficulty sharing a drive on your network,
please see the “Troubleshooting” section of this manual
You can manually check the status of your printer by visiting the
USB Print and Storage Manager, found under the Belkin Router
Manager icon displayed in your system tray (Windows) or menu
bar (Mac) If you have difficulty sharing a printer on your network,
please see the “Troubleshooting” section of this manual
note: Each computer that will use the printer must have
both the Belkin software and the printer’s driver installed
If the print driver is not installed, you will be asked to install
it by the Belkin USB Print and Storage Manager
14
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
adding Other Usb Devices
Other USB devices may also be shared via your Router
Plug your device into the USB port located on the back of
your Router When the light above the USB port is lit, your
device is available to computers on your network
Computers running the Belkin USB Print and Storage Manager will
be able to make use of the shared device by visiting the USB Print
and Storage Manager, found under the Belkin Router Manager
icon displayed in your system tray (Windows) or menu bar (Mac)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
Memory safe
bundled software
Memory Safe allows you to set up a routine backup of your
files to a hard drive or flash drive attached to your Router
Memory Safe is found in the Belkin Router Manager icon
displayed in your system tray (Windows) or menu bar (Mac)
Usb Print and storage Manager
The USB Print and Storage Manager helps to manage and
monitor the use of your USB printers, scanners, hard drives,
and other devices that are connected to your Router’s USB
port and shared across your network USB Print and Storage
Manager is found in the Belkin Router Manager icon displayed
in your system tray (Windows) or menu bar (Mac)
Music labeler
Belkin Music Labeler corrects metadata (track names, artist
names, track numbers, etc ) in your iTunes and Windows Media
libraries, making it easy to find the music you are looking for
Music Labeler is found under the Belkin Router Manager icon
displayed in your system tray (Windows) or menu bar (Mac)
When you have one or more USB devices attached to your
Router, the main actions for those devices are available
directly from the Belkin Router Monitor menu
16
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
Daily DJ
Belkin Daily DJ delivers personalized playlists from your
music collection, automatically, every day It’s like having your
own personal DJ playing the songs that you want to hear It
works great with iTunes and Windows Media Player Daily
DJ is found under the Belkin Router Manager icon displayed
in your system tray (Windows) or menu bar (Mac)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
Video Max
additional Capabilities
Video Max automatically prioritizes your network traffic to
ensure high-quality streaming video, VoIP calls, and games
Guest access
Music Mover
You can allow guests to use your Internet connection without
joining your personal network The network name and
password for the guest network is located on the network
information card found under the foot of your Router
Music Mover sends music from a USB drive attached to your
Router to any UPnP (Universal Plug-and-Play) or DLNA-compatible
device on your network These devices include certain gaming
systems, televisions, Blu-ray players, and cell phones
A person using your guest network will be able to join
without a password, but will be shown a login page when
they attempt to surf the Web They will need to enter
the guest password into this page to continue
18
Download from Www.Somanuals.com. All Manuals Search And Download.
GeTTInG sTaRTeD
front Panel
b) Wi-fi Protected setup (WPs) light and button
The WPS button on the front of your Router can be used to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers To use
the WPS feature on your Router, see “Getting Started > Adding
Computers to Your Network > Using the WPS Button”
(a)
(b)
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection
Off: Idle
blinking Green: The Router is listening for a
WPS-enabled computer or other device
a) Router status light
solid Green: The Router has made a secure
connection with the computer or other device
Your Router’s status is shown by the light on the front
Off: The Router is not plugged into a power source
blinking Green: The Router is starting up
solid Green: The Router is connected to the Internet
amber: A connection was not created
blinking amber: Either the ADSL (RJ11) cable
is not plugged in, or there is no signal
19
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Back Panel
A) ADSL Connector
C) USB Port
D) Reset Button
Connect your Router to your
ADSL connection.
USB printers, disks, and other
USB devices plugged into this
port will be shared on your
network. Each USB port has a
light that indicates its status.
This button is used to restart
your Router in rare cases when it
functions incorrectly. Resetting
the Router will preserve your
settings. This button may also
be used to restore the factory
default settings. Please see
the Troubleshooting section
for more information.
B) Wired (LAN) Connectors
(a)
Connect computers and other
wired network devices to these
ports using Ethernet cables.
Off: No USB device is
connected or the attached
USB device is not in use.
(b)
Blinking: Please wait to
unplug the device until
the light turns off.
E) Power Connector
On: The USB device is
connected and being
shared on your network.
Connect the included power
supply to this jack.
(c)
(d)
(e)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TeCHnICal DeTaIls
Sony® PS3™, etc , that support the UPnP protocols
Technical features
Integrated aDsl2+ Modem
The integrated ADSL2+ modem allows you to connect to the
Internet via your local Internet Service Provider (ISP) without
installing and maintaining a separate DSL modem
Integrated 802 11n Wireless access Point
Utilizing Dual-Band Network technology, your Router
creates two separate networks (one at 2 4GHz band and
the other at 5GHz band), allowing increased bandwidth to
all your connected wireless devices and computers
naT IP address sharing
To save you the cost of adding IP addresses per
computer in your house, your Belkin Router uses Network
Address Translation (NAT) technology, allowing you to
share a single IP address across your network
sPI firewall
Your Router is equipped with a firewall that will protect your
network from a wide array of common attacks and viruses
UPnP aV Mediaserver
Easily share the media contents, such as photographs,
movies, or music, stored in your USB storage device with
other digital media players, such as Microsoft® Xbox®,
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TeCHnICal DeTaIls
setup software
system Requirements
A computer running Windows® XP SP2 and higher,
Windows Vista® 32 and 64 bit, or
Windows 7 32 and 64 bit;
Modem Router
or Mac OS® X, 10 5 and 10 6
Broadband ADSL Internet connection with
RJ11 (telephone) connection
Minimum 1GHz processor and 256MB RAM
600MB of free hard-drive space for installation
At least one computer with an installed network interface adapter
TCP/IP networking protocol installed on each computer
RJ11 ADSL telephone cable
Memory safe and Usb Print and storage Manager
Internet browser
Windows® XP SP2 and higher,
Windows Vista® 32 and 64 bit, or
Windows 7 32 and 64 bit;
or Mac OS® X, 10 5 and 10 6
Minimum 1GHz processor and 256MB RAM
50MB of free hard-drive space for installation
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TeCHnICal DeTaIls
Daily DJ and Music labeler
PC
Windows XP SP2 or higher, Windows Vista, or Windows 7
2GHz processor
1GB of RAM
DirectX® 9 0-compliant video and sound
Internet Explorer® or Firefox®
Mac®
Mac OS X v10 5 or later
Intel® Core™ Duo 1 83GHz or higher processor
1GB of RAM
Safari® or Firefox
200MB of free hard-drive space for installation
23
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
belkin setup cannot find my Router
Troubleshooting
If Belkin Setup is not able to communicate with your Router during
the installation process, please check the following items
The setup CD does not automatically start
1 Make sure that the wireless hardware on your
computer is turned on, if available
If Belkin Setup does not run when you insert the CD-ROM, your
computer may not be configured to open CDs automatically
2 Try connecting your computer to one of the four “wired”
ports on the Router with an Ethernet cable
If Belkin Setup does not appear within 15 seconds, browse
to your CD-ROM drive and open the “Belkin Setup” icon
setup manually Please see “Manual Setup Using Your
Browser” earlier in this manual for more information
3 Ensure that the Router is on The front-panel light should be on
4 Unplug the Router’s power supply for 10
seconds, then plug it back in
5 There may be firewall software on your computer preventing
an outgoing connection You may choose to temporarily
disable this software before attempting setup
If Belkin Setup still cannot find the Router, you might choose
to do a manual setup Refer to “Manually Configuring
Network Settings” in this manual for details
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
belkin setup cannot connect my Router to the Internet
belkin setup completed installation, but I cannot browse the
Web The light on the front of my Router is blinking amber
If Belkin Setup is not able to connect the Router to
the Internet, please check the following items:
1 Make sure the Router is connected to your ADSL line with an
RJ11 (telephone) cable via the Router’s one gray ADSL port
1 Use the troubleshooting suggestions within Belkin Setup
2 Check that the modem (ADSL) connection is
connected to your broadband (ADSL) socket on the
wall (via an ADSL filter if one is required)
2 If your ISP requires a user name and password, make sure that
you have typed in your user name and password correctly Some
user names require that the ISP’s domain may be at the end of the
name Example: “myname@myisp com” The “@myisp com” part of
the user name may need to be typed as well as your user name
3 Unplug your Router’s power supply, wait 10 seconds,
and plug it back in This will cause the Router to try to
reestablish communication with the ADSL line
3 If you continue to have no Internet connection, refer
to “Manually Configuring Network Settings” in this
manual for an alternative setup method
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
I can’t connect to the Internet wirelessly
I can’t connect to the Internet wirelessly and my
network name is not listed in available networks
If the light on the front of the Router is solid green, then your
Router is connected to the Internet You may not be connected
to the Router’s wireless network Please refer to “Adding
Computers to Your Network” in this manual for instructions
1 Verify that your Router is on and the
front-panel light shows solid green
2 If you are far from the Router, you might try moving
closer to see if you might have been out of range
3 Using a computer attached to the Router via a network cable,
This setting is found on the “Channel and SSID” page
26
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
My wireless network performance is slow, inconsistent,
suffers from weak signal, or I’m having difficulty maintaining a
VPn connection
limiting the wireless transmit rate—Limiting the wireless transmit
rate can help improve range and connection stability Most wireless
cards have the ability to limit the transmission rate To change this
property in Windows, go to the Windows Control Panel, open “Network
Connections”, and double-click on your wireless card’s connection In
the properties dialog, select the “Configure” button on the “General”
tab, then choose the “Advanced” tab and select the rate property
Wireless technology is radio-based, which means connectivity
and the throughput performance between devices
decreases when the distance between devices increases
Other factors that will cause signal degradation (metal is
generally the worst culprit) are obstructions such as walls
and metal appliances Note also that connection speed may
decrease as you move farther away from the Router
Wireless client cards are usually set to automatically adjust
the wireless transmit rate for you, but doing so can cause
periodic disconnects when the wireless signal is too weak; as
a rule, slower transmission rates are more stable Experiment
with different connection rates until you find the best one
for your environment Note that all available transmission
rates should be acceptable for browsing the Internet For
more assistance, see your wireless card’s user manual
In order to determine if wireless issues are related to
range, we suggest temporarily moving the computer
within 10 feet from the Router if possible
Changing the wireless channel—Depending on local
wireless traffic and interference, switching the wireless
channel of your network can improve performance and
reliability See the section titled “Changing the Wireless
Channel” for instructions on how to choose other channels
27
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
I’ve installed this new Router and some of my network clients
(computers, game consoles, etc ) are now unable to connect
Does the Router support Wireless
Protected access (WPa) security?
Your new Router came pre-configured with a network name and
password, found printed on an attached card All clients must use this
network name and password to connect wirelessly to your Router
You will need to find the network settings on your client, select the
network name printed on the card from the list of available networks,
and enter the password when prompted to join the wireless network
The Router ships with WPA/WPA2 security turned on
Windows XP and some older network hardware may
require a software update to support WPA/WPA2
I am having difficulty setting up WPa security on my Router
Click on the “Login” button in the top right-hand corner of the
screen You will be asked to enter your password If you have never
set a password, leave the “Password” field blank and click “Submit”
2 Click “Wireless” in the left-hand menu Then
click “Security” just below that
3 Select the “WPA/WPA2” option
4 Enter a password This can be from 8–63 characters of your choice,
including spaces and punctuation, OR a 64-digit hexadecimal
number (using only the numbers 0–9 and letters A–F)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
5 Click “Apply Changes” to finish Your wireless
connection is now encrypted Each computer using your
wireless network will need to use the new key
I am having difficulty setting up Wired equivalent
Privacy (WeP) security on my Router
Click on the “Login” button in the top right-hand corner of the
screen You will be asked to enter your password If you have never
set a password, leave the “Password” field blank and click “Submit”
note: If you are configuring the Router over a wireless
connection, you will have to re-connect to the
Router after changing any security settings
note: Some older networking hardware supports
only WEP encryption If your older computers cannot
connect to your network, try 128-bit or 64-bit WEP, or
seek software updates from their manufacturers
2 Click “Wireless” in the left-hand menu Then
click “Security” just below that
3 Select the “128-bit WEP” option
4 You may type in a WEP key manually, or generate one from
a passphrase Type a phrase in the “Passphrase” field and
click the “Generate” button A WEP key is composed of 26
hexadecimal digits (0–9, A–F For example, C3 03 0F AF
4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key
29
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
5 Click “Apply Changes” to finish Your wireless
activity is now encrypted Each computer using your
wireless network will need to use the new key
a disk I plugged into the Usb port is not showing
up on my computer or in Memory safe
1 Is the light on over the USB port that the disk is plugged into?
If not, try unplugging and re-plugging the disk Please check
that the USB connector is firmly plugged into the Router
note: If you are configuring the Router over a wireless
connection, you will have to re-connect to the
Router after changing any security settings
2 If your disk has an optional power supply, please use
it while the disk is attached to your Router
note: Some older networking hardware supports
only 64-bit WEP encryption If your older computers
cannot connect to your network, try 64-bit WEP
3 The Router supports FAT16, FAT32-, or NTFS-formatted
disks Disks in other formats will not appear in the
Finder (Mac OS X) or Windows Internet Explorer
30
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
a printer I plugged into the Usb port is
not showing up on my computer
a different sort of Usb device that I plugged into the
Usb port is not showing up on my computer
1 Is the light on over the USB port that the printer is plugged into?
If not, try unplugging and re-plugging the printer Please check
that the USB connector is firmly plugged into the Router
Most USB devices other than disks and printers must be
accessed via the USB Print and Storage Center
1 Is the light on over the USB port that the device is plugged into?
If not, try unplugging and re-plugging the device Please check
that the USB connector is firmly plugged into the Router
2 To print to a printer attached to the Router, your
computer must have that printer’s driver installed
Please check that the driver is installed
2 Via the Belkin Router Manager, open the USB
Print and Storage Center Check that the device
appears in the list of available devices
3 The printer may not be set to auto-connect Via the Belkin Router
Manager, open the USB Print and Storage Center Check that the
printer appears in the list of available devices View the properties
of the printer, and check that “auto-connect” is selected
3 Select the device and click the “Use” button The device will be
virtually connected to your computer until you choose to “Stop
Using” the device, or another person requests use of the device
31
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING, SUPPORT, AND WARRANTY
Technical Support
US
Thailand
0018004413318
UK
Philippines
180014410282
Australia
Hong Kong
30021318
New Zealand
China
800 819 0159
Europe
Australia
1800 235 546
Singapore
1800 622 1130
New Zealand
0800 235 546
Malaysia
1 800 812 076
Asia email
India
1800-419-5546
Korea email
32
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING, SUPPORT, AND WARRANTY
What is not covered by this warranty?
Belkin International, Inc., Limited
3-Year Product Warranty
All above warranties are null and void if the Belkin product is
not provided to Belkin for inspection upon Belkin’s request
at the sole expense of the purchaser, or if Belkin determines
that the Belkin product has been improperly installed, altered
in any way, or tampered with. The Belkin Product Warranty
does not protect against acts of God such as flood, lightning,
earthquake, war, vandalism, theft, normal-use wear and tear,
erosion, depletion, obsolescence, abuse, damage due to low
voltage disturbances (i.e. brownouts or sags), non-authorized
program, or system equipment modification or alteration.
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original
purchaser of this Belkin product that the product shall be free
of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for three years.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product
free of charge (except for shipping charges for the product).
Belkin reserves the right to discontinue any of its products without
notice, and disclaims any limited warranty to repair or replace any
such discontinued products. In the event that Belkin is unable to
repair or replace the product (for example, because it has been
discontinued), Belkin will offer either a refund or a credit toward
the purchase of another product from Belkin.com in an amount
equal to the purchase price of the product as evidenced on the
original purchase receipt as discounted by its natural use.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
How to get service
Belkin reserves the right to review the damaged Belkin product
All costs of shipping the Belkin product to Belkin for inspection
shall be borne solely by the purchaser If Belkin determines,
in its sole discretion, that it is impractical to ship the damaged
equipment to Belkin, Belkin may designate, in its sole discretion,
an equipment repair facility to inspect and estimate the cost to
repair such equipment The cost, if any, of shipping the equipment
to and from such repair facility and of such estimate shall be
borne solely by the purchaser Damaged equipment must remain
available for inspection until the claim is finalized Whenever
claims are settled, Belkin reserves the right to be subrogated
under any existing insurance policies the purchaser may have
To get service for your Belkin product you
must take the following steps:
1 Contact Belkin Tech Support at the number listed
on page 32, within 15 days of the Occurrence Be
prepared to provide the following information:
a The part number of the Belkin product
b Where you purchased the product
c When you purchased the product
d Copy of original receipt
2 Your Belkin Customer Service Representative will then
instruct you on how to forward your receipt and Belkin
product and how to proceed with your claim
34
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
How state law relates to the warranty
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF
BELKIN THERE ARE NO OTHER WARRANTIES, EXPRESSED
OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING
THE IMPLIED WARRANTY OR CONDITION OF QUALITY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE
LIMITED IN DURATION TO THE TERM OF THIS WARRANTY
Some states do not allow limitations on how long an implied
warranty lasts, so the above limitations may not apply to you
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL,
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR
MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO,
LOST BUSINESS OR PROFITS ARISING OUT OF THE
SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
This warranty gives you specific legal rights, and you may also have
other rights, which may vary from state to state Some states do
not allow the exclusion or limitation of incidental, consequential,
or other damages, so the above limitations may not apply to you
35
Download from Www.Somanuals.com. All Manuals Search And Download.
ReGUlaTORY InfORMaTIOn
fCC statement
federal Communications Commission notice
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules These limits are designed to provide reasonable protection
against harmful interference in a residential installation
DeClaRaTIOn Of COnfORMITY WITH fCC RUles
fOR eleCTROMaGneTIC COMPaTIbIlITY
We, Belkin International, Inc , of 12045 East Waterfront Drive,
Playa Vista, CA 900994, declare under our sole responsibility
that the product, F7D4402 v1, complies with Part 15 of the FCC
Rules Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation
This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications
However, there is no guarantee that interference will not occur
in a particular installation If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
Caution: exposure to Radio frequency Radiation
The device shall be used in such a manner that the potential
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
for human contact normal operation is minimized
• Connect the equipment to an outlet on a circuit different
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment This
equipment should be installed and operated with a minimum
distance of 20cm between the radiator and your body
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
• FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment
This device and its antenna(s) must not be co-located or
operating in conjunction with any other antenna or transmitter
36
Download from Www.Somanuals.com. All Manuals Search And Download.
ReGUlaTORY InfORMaTIOn
Canada-Industry Canada (IC)
Information
The wireless radio of this device complies with RSS
139 & RSS 210 Industry Canada This Class B digital
apparatus complies with Canadian ICES-003
Products with the CE marking comply with the EMC Directive
(2004/108/EC) and the Low Voltage Directive (2006/95/
EC) issued by the Commission of the European Community
Compliance with these directives implies conformity to
the following European Product Family Standards
Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device
must accept any interference, including interference
that may cause undesired operation of the device
•
•
•
•
•
EN 55022 (CISPR 22) – Electromagnetic Interference
EN 55024-1 – Electromagnetic Immunity
EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics
EN 61000-3-3 (IEC610000) – Power Line Flicker
EN 60950-1 (IEC60950-1) – Product Safety
Cet appareil numérique de la classe B conforme
á la norme NMB-003 du Canada
europe
Products that contain the radio transmitter are sometimes
labeled with the Notified Body number (CE0560) or CE
alert marking if the standard used in the conformity is
not harmonized across the European Community
European Union Radio products with the CE or CE alert
marking comply with the R&TTE Directive (1999/5/EC)
issued by the Commission of the European Community
Compliance with this directive implies conformity
to the following European Norms (in brackets are
the equivalent international standards)
•
•
•
EN 60950-1:2006 (IEC60950-1) – Product Safety
EN 300 328 Technical requirement for radio equipment
ETS 301 489 General EMC requirements for radio equipment.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2010 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed. Windows and Windows Vista are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or other countries.
8820au00398_F7D4402au
Download from Www.Somanuals.com. All Manuals Search And Download.
|