installation & operating Automatic
instructions and washing guidance washing machine
WMA 510 S
WMA 510 W
a
Download from Www.Somanuals.com. All Manuals Search And Download.
Due to the quality control processes applied to your machine
during production, there may be some water left in your
machine. This does not cause any damage.
Note that temperatures in this book are for guidance only. Always
check the clothing labels before selecting your wash programme.
Recycling: This product bears the selective sorting symbol
for waste electrical and electronic equipment (WEEE). This
means that this product must be handled pursuant to
European Directive 2002/96/EC in order to be recycled or
dismantled to minimize its impact on the environment. For
further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are
potentially dangerous for the environment and human health due
to the presence of hazardous substances.
Download from Www.Somanuals.com. All Manuals Search And Download.
contents
Introduction
Welcome
2
Installation
Know your washing machine/specification
4
5
5
7
Location
Installation
Electrical connection
Operating
How to use
8
Programme descriptions
Function buttons
12-13
13
13
ITCL fabric care symbols
Machine care
Care & maintenance
Before calling service/troubleshooting
Guarantee
14
16
17
17
Service
3
Download from Www.Somanuals.com. All Manuals Search And Download.
know your washing machine
Top lid
90°
60°
60°
Start
/
Cancel
Pause
Rins
e
Extra
Rins
Cottons
Cold
40°
Prewash
H
o
ld
e
40°
Synthetics
30°
On/Off
Cold
A
Class 40°
Delicates 30°
Mini 30’
Hand Wash
Rinse
Cold
Woollens
40°
Ready Wash Spin/End
Spin+Drai
n
Front Door
Handle
Pump filter cover
Kick plate
Adjustable feet
Programme
Selection
knob
Auxillary
Function
buttons
Start/Pause/Cancel
button
90°
60°
60°
Start / Pause
Cancel
Rinse
Hold
Extra
Rinse
Cottons
40°
Prewash
40°
Synthetics
30°
Cold
On/Off
Cold
A Class40°
Delicates 30°
Mini 30’
Hand Wash
Rinse
Cold
Woollens
40°
Ready
Wash Spin/End
Spin+Drain
Program progress
indicator lights
On/Off
button
Detergent and softener drawer
specification
Capacity (dry fabric)
5kg
Dimensions width x depth x height
Because we continually strive to improve
our products, we may change our specifications
and designs without prior notice.
60cm x 54cm x 85cm
62kg
Net weight
Supply voltage
Nominal current
Motor power
230V~ 50Hz
10A
300 watts
2050 watts
52 rpm
Heater power
Washing speed
Spin speed (max.)
1000 rpm
4
Download from Www.Somanuals.com. All Manuals Search And Download.
location
You can locate the washing machine
In addition to this, washing machines should
not be installed on carpet, foam backed
laminate, or parquet flooring where the nature
of these types of flooring can also contribute
to the inefficient operation of the washing
machine on the spin cycle.
anywhere (except bathrooms, showers and
away from rain, damp places and water) as
long as you have a cold water supply, drainage
and electrical connection alongside.
Ensure there is clearance each side of the
machine to allow slight side ways movement
during washing and spin drying.
Attention!
Never place your machine on a carpet. This
prevents air circulation. The electrical
components of the machine may overheat and
may cause damage.
Please ensure the power, water supplies
and waste are suitable, if in doubt, consult a
qualified plumber or electrician.
Different methods of floor construction can
result in an increase in vibration/noise during
spin modes.
If these symptoms are experienced please
ensure firstly that all four feet are in firm contact
with the floor to minimise any out of balance
vibration which may be generated.
Additional information is available by
request.
installation
C
P
C
Attention! Keep the safety bolts for future
transportation and reinstate them before
transporting your machine. Never transport
your machine without the transport bolts in
position. Any resultant damage is not covered
by the warranty.
Removing transport safety bolts
The transport safety bolts must be removed
before any operation of the machine.
1 Turn the bolt heads C anti-clockwise until
the bolt can be partially withdrawn.
2 Remove them and the rubber bushes by
pulling outwards. An up/down action and
a small squirt of washing up liquid will ease
removal.
3 Plastic plugs, supplied inside the protective
bag, designated P, should be placed in the
safety bolt holes as shown.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Feet adjustment
To ensure quiet and stable operation, the
machine should be positioned correctly and
leveled. If the machine is unstable, adjust feet
by loosening the plastic lock nut and screwing
or unscrewing the feet until the machine is
level. After positioning, tighten the lock nut.
5
90°
60°
60°
Start ause
Cancel
/
P
Coton
40°
s
Rinse
Hold
Extra
Rinse
40°
Prewash
Sy
n
h
t
eitcs
30°
Cold
On/Off
Cold
A
Cla
s
40°
Delicates 30°
Mini30
’
HandWash
Cold
Woolens
40°
Ready
W
a
s
h
S
p
i
/
E
n
d
Rinse
Sp in+ Drain
Water inlet connection
Your machine comes with cold water
connection only.
Connect the cold water using the hose with
blue printing or colour.
Cold water supply
For proper operation, the pressure of cold
water should be between 1 and 10 bars. (1
bar corresponds to more
Drain hose
than 8 litres per minute
flow rate with a fully open
tap.)
The drain hose should be placed and secured
either at the side of the sink A, directly to the
drain B or directly to the waste water
inlet C.
To prevent water leaks,
sealing washers are
•
•
The hose should not be bent.
supplied with the water inlet hose inside the
machine. Place these on the hose end and
tighten both ends fully.
Using method A, the drain hose should be
secured with the elbow so that it can not
be dislodged.
In order to prevent any water leakage and
damage, turn off the water tap when not in
use. Connect the right angled end of the hose
to the machine water inlet.
•
•
The waste pipe must only be connected
into the foul drains and not surface water
drainage system.
The hose should be placed between 20 and
80cm from the floor level and must not be
extended otherwise the machine may not
empty the waste water.
The washing machine must only be
connected with the new hose provided and
old hoses must not be reused.
•
The minimum diameter of any external pipe
must be 32 mm.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
electrical connection
Make sure that you have an earthed power
outlet socket rated at 13 amps (minimum).
Attention!
Important
Fitting a different plug
As the colours of the wires in the mains
lead of this appliance may not correspond with
the coloured markings identifying the terminals
on your plug, proceed as follows:
If you use your machine as built-in, the
socket must be reachable after installation, or
a separate switch (which can disconnect the
two poles) must be used in the installation.
1 Connect the green - yellow or green (earth)
wire to the terminal in the plug marked ‘E’
or with the symbol or coloured green
and yellow or green.
Electrical requirements
2 Connect the blue (neutral) wire to the
terminal in the plug marked ‘N’ or coloured
black.
Before you insert the plug into the wall
socket make sure that the voltage and the
frequency shown in the rating label corresponds
to your electricity supply.
3 Connect the brown (live) wire to the terminal
in the plug marked ‘L’ or coloured red.
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or in the
main fuse box. If in doubt contact a qualified
electrician.
We recommend that this appliance be
connected to the mains supply via a suitable
switched and fused socket in a readily accessible
position.
Should the mains lead of the appliance
become damaged or need replacing at any
time, it must be replaced by a special purpose
made mains lead which can only be obtained
from a Beko Authorised Service Agent.
Green and yellow
or green
Warning
This appliance must be earthed
If the fitted moulded plug is not suitable for
your socket, then the plug should be cut off
and an appropriate plug fitted.
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse need
to be replaced an ASTA approved BS1362 fuse
of the same rating must be used. Do not forget
to refit the fuse cover. In the event of losing
the fuse cover, the plug must not be used until
a replacement fuse cover has been fitted.
Colour of the replacement fuse cover must be
the same colour as that visible on the pin face
of the plug. Fuse covers are available from any
good electrical store.
N
Blue or
L
Brown or red
black
In order to avoid hazards, damaged supply
cord should be replaced by the manufacturer,
its service agent or similarly qualified people.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
how to use
Sorting laundry
Sort the laundry according to the following
groups and wash them separately:
Programme selection
Select the programme after referring to the
programme descriptions and table on
page 12-13.
•
•
•
•
•
White and colour fast fabrics
Non-fast, coloured fabrics
Delicate fabrics (silk, rayon etc.)
Woollens
Warning! Always switch on the machine
before selecting your wash programme.
Turn the programme selection knob to the
desired programme. You have now selected
both the washing programme and the
washing temperature at the same time.
Hand knits should be placed inside out in
the machine.
Be sure to empty pockets and remove any
belts, buckles, pins, etc. from the clothing.
Never exceed the maximum load of the selected
programme (see page 13)
Programme selection indicator
90°
60°
60°
Cottons
Cod
40°
40°
Synthetics
30°
Cold
0°
Delica
Spin+Dra
Loading the machine
Make sure power button is off.
1 Pull the door handle.
Function selection
Start / Pause
Cancel
Rinse
Hold
Extra
Rinse
Prewash
2 Place the fabrics uniformly inside the
machine. Make sure that there is no clothing
obstructing the door.
3 Close the door by pushing lightly.
If the door does not close completely, the
machine will not start. This is a safety
precaution. The front door is locked until
the end of the washing programme and it
cannot be opened for about 2 minutes
following the end of the programme.
Ready
Wash Spin/End
Select the desired auxiliary function such as
Rinse Hold, Extra Rinse, etc. before you push
the “Start/Pause/Cancel” button. Indicator light
of the function selected will be on. Door will
be locked after pressing “Start/Pause/Cancel”
button.
To cancel the selected function, press
“Start/Pause/Cancel” button. Your machine
will pause. Any auxiliary function button can
be selected now if needed, see page 13.
You have to start the programme by repressing
the “Start/Pause/Cancel”.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent and softener dispenser
1 Open the drawer.
Starting
2 Put powder detergent and the fabric
softener in the compartments as shown.
3 Close the detergent and softener drawer.
Start / Pause
Cancel
Rinse
Hold
Extra
Rinse
Prewash
On/Off
Ready
Wash Spin/End
Syphon
for fabric softener
Detergent compartment I
for prewash cycle
Detergent compartment II
for wash cycle
Attention!
Before any operation of the machine check
the following:
•
•
•
Have you closed the door?
The tap open?
Is the drain hose placed and secured
properly?
Is power connected?
•
When you press the On/Off button, your
machine is ready to select the desired
programme. To switch the machine off, repress
the On/Off button.
Washing can only start when the
“Start/Pause/Cancel” button is pressed.
Powders and liquids
The performance of the washing machine
depends on the effectiveness of the detergent.
Stains can remain if low quality detergents are
used.
Start / Pause
Cancel
Rinse
Hold
Extra
Rinse
Prewash
•
•
•
•
Only use powders specific for automatic
washers, otherwise over foaming and poor
washing performance will be experienced.
Do not use liquid detergent in your detergent
drawer. Only use liquid detergents with a
dosing ball.
Ready
Wash Spin/End
Do not attempt to use detergents and
bleaching agents that contain chlorine and
sulphur.
Attention!
Pressing the On/Off button does not mean
that the washing operation will start! To start
the washing, press the Start/Cancel/Pause
button!
Concentrated softener may clog the syphon,
in this case add some water to the softener
liquid.
Amounts
Follow the manufacturer’s recommended
amount of detergent given on the packaging.
Adjust the amount according to the dirt
level, the amount of fabric and the softness of
the water. For example, if a small amount of
clothing is washed, put in half the amount of
detergent normally required.
•
Do not fill the fabric softener above the max
mark as any excess amount will mix into
the wash water and you will have to re-fill
the compartment.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme Follower
Child Lock
The relevant lamp on the program follow-
up indicator lights up according to the selected
program after the machine starts operating.
Light of the completed step goes out and the
next relevant step lights up. When the “On/Off”
button is pressed, lamp of the Ready lights up.
The “Wash” light on the program follow-up
indicator lights up when Start/Pause/Cancel
button is pressed after selecting the washing
program.
To prevent operation by children you may
activate child lock while the machine is in
operation.In order to activate the child lock,
press Prewash and Rinse Hold function keys
simultaneously for 3 seconds after the washing
programe has started. The prewash indicator
light will flash continously.
Start / Pause
Cancel
Rinse
Hold
Extra
Rinse
Prewash
“Spin/End” indicator will light up when the
program comes to an end. For your safety,
your machine will not let you open the door
for 1 minute after the program is finished. The
“Spin/End” light will start flashing. After the
door lock is deactivated, the “Ready” and
“Spin/End” indicators will light up. You may
now open door.
y
W
You can put your machine to “Pause” mode
when the machine is working by pressing the
Start/Pause/Cancel button. “Start/Pause/Cancel”
button will light up. Some alterations in program
settings may be made in the Pause mode (See,
Changing a Program) and if “Pause” mode is
entered in an appropriate step of the program,
adding laundry function may be used (See,
Laundry adding feature).Allow 2 minutes for
the door lock to be deactivated.
Only the on/off button can be used when
child lock option is selected.
To start a new program after the program
is over or to adjust the program, child lock
should be deactivated. The child lock will be
deactivated when the same keys are pressed
together for 3 seconds and the Prewash
indicator light will go out.
Press “Start/Pause/Cancel” button again to
return to the “Wash” mode from “Pause”
mode.The “Start/Pause/Cancel” button will
light up continuously and the machine will
resume operating from the step it was paused.
Programme operation
During the machine’s operation, the indicator
lights on the programme follower will light up
as each stage is reached.
Softener is added in the softener
compartment, it will be used in the last rinse
cycle.
If rinse hold is selected, you have to press
“Start/Pause/Cancel” button, to let the
programme continue.
Start / Pause
Cancel
Rinse
Hold
Extra
Rinse
Prewash
On/
Ready
Wash Spin/End
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Laundry
Programme Cancelling
When loading laundry, make sure the
garments are unfolded and are loosely placed
in the drum. Place your knitted garments into
the machine inside out. Ensure that no clothes
are trapped between the door and the rubber
bellow when closing the door. Push the door
to close. Washing process will not start unless
the door is closed.
You can select a new program and start
washing.To cancel a programme before it starts
to wash press “Start/Pause/Cancel” key for 3
seconds. “Start/Pause/Cancel” and the other
indicator lights will be off .
If the programme has started and you want
to cancel it, press Start/Pause button for 3
seconds. The programme will move to the
“spin” step and related indicator on the
programme follower will be on. Machine will
start to pump for draining and the door can
be opened after a short period of time.
Re-Selection / Cancellation of
Functions After Operation Start
In order to change auxiliary functions, push
the Start/Pause/Cancel button for a short time
to pause the program. Change the auxiliary
functions allowed by the selected program.
Press the Start/Pause/Cancel button for a short
time to continue the program.
Start / Pause
Cancel
Rinse
Hold
Extra
Rinse
Prewash
Ready
Wash Spin/End
End of the programme
When the program ends “ Spin/End”
indicator light will come on.The door can then
be opened after about 2 minutes and machine
is ready for next washing load. Press “On/Off”
to turn machine off.
Unloading
The machine stops automatically after
programmes have been completed.
1 In about 2 min, the door will unlock. Open
the door.
2 Press the On/Off button to switch off the
machine.
3 Unload the machine and leave the door open.
Check to see if there is any water left in the
door gasket. If so, remove with a soft cloth.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
programme descriptions
Cottons
Woollens
Cotton90,Cotton60,Cotton40,Cottoncold,A Class 40
Programmes
Woollen 40, Woollen cold, Handwash Programmes
Woollen 40
Woollen programme (main wash, 3 rinses,
1 intermediate spin, final spin).The set temperature is 40°C
for this programme.
These programmes are used for white and coloured
cotton and linen fabrics.
Woollen Cold Woollen programme (main wash, 3 rinses,
1 intermediate spin, final spin).
Cotton 90
Programme with main wash (main wash, 3
rinses, 3 intermediate spin, final spin). The set temperature
is 90°C for this programme.
Handwash 30 Special programme for hand wash marked
wool and silk. (main wash, 2 rinses, no intermediate spin,
final spin). The set temperature is 30°C.
Cotton 60 A class 60° Programme with main wash
(main wash, 3 rinses, 3 intermediate spin, final spin).The
set temperature is 60°C for this programme.
Mini 30 Short programme (main wash, 2 rinses, no
intermediate spin, final spin). The set temperature is 30°C.
Cotton 40
(main wash, 3 rinses, 3 intermediate spin, final spin).The
set temperature is 40°C for this programme.
Programme with main wash
Cotton Cold
Programme with main wash
(main wash, 3 rinses, 3 intermediate spin, final spin).The
set temperature is 40°C for this programme.
A Class 40
A Class 40° energy and washing efficiency
(main wash, 3 rinses, 3 intermediate spin, final spin). The
set temperature is 40°C for this programme.
Synthetics
Synthetics 60, Synthetics 40, Synthetics 30, Synthetics
Cold, Delicate 30 Programmes
These programmes are designed for synthetic fabrics,
nylon clothing, curtains and non iron wool fabrics. The
clothing is washed gently with more water.
Synthetics 60 Normal programme for synthetics (mainwash,
3 rinses, 3 intermediate spin, final spin). The set temperature
is 60°C for this programme.
Synthetics 40 Normal programme for synthetics (main
wash, 3 rinses, 3 intermediate spin, final spin). The set
temperature is 40°C for this programme.
Synthetics 30 Normal programme for synthetics (main
wash, 3 rinses, 3 intermediate spin, final spin). The set
temperature is 30°C for this programme.
Synthetics Cold Normal programme for synthetics (main
wash, 3 rinses, 3 intermediate spin, final spin).
Delicate 30 Delicate programme. (main wash, no
intermediate spin, 3 rinses, final spin) The set temperature
is 30°C for this programme.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Water
Consumption Consumption
Program
Duration
(min.)
Energy
Max
Load
(kg)
Rinse
Hold
Extra
Rinse
Prewash
Program
(lt)
Type of laundry
(kWh)
1.70
Heavy soiled light Durable fabrics made
of cotton and linen
155
140
150
110
180
120
125
110
100
85
•
•
•
•
•
•
45
5
5
Cottons 90
Cottons 60*
Normal soiled light cotton and linen
durable to heat
49
45
45
45
55
55
55
55
60
60
60
50
40
15
_
0.95
0.65
0.35
0.65
0.90
0.55
0.35
0.20
0.40
0.04
0,40
0.21
0.16
0.04
0.03
Less soiled light cotton and linen sensitive
to heat
•
•
•
•
•
•
5
Cottons 40
Less soiled light cotton and linen sensitive
to heat
Cottons Cold
5
Heavy soiled light Durable fabrics made of
cotton and linen (baby clothes etc.)
A Class 40
5
Normal soiled light cotton/synthetic
blended durable to heat
Synthetics 60
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2.5
2.5
2.5
2.5
2
Less soiled light cotton/synthetic blended
durable to heat
Synthetics 40
Synthetics 30
Synthetics Cold
Delicates 30
Woollens Cold
Woollens 40
Handwash 30
Mini 30
Very Less soiled light or cotton/synthetic
blended sensitive to heat
Very Less soiled light or cotton/synthetic
blended sensitive to heat
Delicate, sensitive synthetic, cotton
blended
Woollen and delicate laundry with
machine wash sign
70
1.5
1.5
1
Woollen and delicate blended with
machine wash label
75
Special program for silk, cashmere or
laundry with no machine wash sign
55
Special program for slightly soiled and little
amounts of laundry
30
2.5
5
Rinse
23
Rinse Program
Spin+Drain
14
Spin and Pump Program
5
function buttons
Prewash
cotton/synthetics/delicates and wool programmes."
A pre-wash is only worth while with heavily soiled
laundry. Without prewash you save energy, water,
washing powder and time.
Extra rinse
Using this function, you can have 4 rinse cycles instead
of 3. The additional rinse will extract more detergent
for sensitive skin.
Rinse hold
"Using this function, you can leave your clothes
in the water as long as required at the softener
step. When you want to finish the washing cycle,
select the spin speed first which is suitable for the
clothing , and then press the "start/pause/cancel"
button. The cycle will proceed with a spin phase
and end. You can use this function only on
ITCL fabric care symbols
Descriptions of the international textile care label (ITCL) symbols.
A
60°
P
Washing
temperature
Do not use
bleach
No spin
Bleach can
be used
Chemicals can
be used
Do not wash
Dry clean
Do not
machine
wash
Dry on
horizontal
surface
No dry
cleaning
Iron permitted
Can be washed in Do not wash in
centrifugal centrifugal
machine machine
Line dry
Do not iron
Warm iron
13
Download from Www.Somanuals.com. All Manuals Search And Download.
care and maintenance
Detergent dispenser
It is necessary to remove the detergent
dispenser drawer from time to time to clean
away residue and ensure correct operation.
To remove
Pull out the drawer and press down on the
coloured insert to release it fully from its
housing. Wash the drawer in warm water to
remove detergent and softener residue and
before replacing wipe it dry.
Syphon
The syphon (coloured insert in the dispenser)
must be cleaned. Remove the dispenser drawer
and lift out the syphon and wash in warm
water to remove any softener residue. Refit
ensuring that the syphon is correctly fitted
before use.
Maintenance wash
If you regularly use low temperature
programs, for example 40˚C, certain detergents
cause build up of greasy deposits over time.
We recommend a hot maintenance wash once
every 6 months to clear such accumulation of
residue.
Simply run the wash programme “Cotton
90” without laundry using the usual amount
of detergent.
Water intake filter
At the end of the water intake connection
and water inlet hose-tap side there are filters.
These filters prevent any dirt and objects
passing into the machine. It is advisable that
these filters should be cleaned every 30-40
washes. To clean these filters, first turn the tap
off. Then, disconnect the hose and clean the
filter with a thin brush. If the filter is very dirty,
you may clean it by pulling out with pliers. To
clean the filter at the tap side of the hose, pull
it out by hand and clean the filter under tap
water. Ensure that the sealing rings are in place
before reassembly.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Pump filter warning
When the appliance is in use and depending
on the programme selected there can be hot
water in the filter. Never remove the filter
during a wash cycle, always wait until the
appliance has finished the cycle, and is empty.
When replacing the filter, ensure it is securely
retightened so as to stop leaks and young
children being able to remove it.
Hoses
To prevent any leakage, check the hoses
every two years. If the machine is placed in
cold ambient temperatures, the water
remaining inside the pump and hoses should
be drained to prevent freezing, empty the
water intake hoses by disconnecting from taps.
Drum
Do not leave any metal objects (pins, needles,
etc.) inside the drum. These objects may cause
rust on the drum surface and stain clothing.
Do not clean the drum with abrasive materials.
Cleaning the pump filter
Warning
Hot water danger! Always ensure that the
drum is completely empty. Be careful while
taking out the filter!
Switch off the appliance. Open the filter
cover by pulling at the holder as shown.
Open the filter as shown turning the cap
anti-clockwise, drain the water. If there are any
foreign parts inside the filter, take them out
and clean the filter before replacing it. Then,
place the filter while turning it clockwise. When
securely tightened, close the filter cover.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
before calling service/troubleshooting
You turned the machine on, but the indicator
light is not lit
Pump does not drain water
Check Rinse Hold button has not been
selected in error. Clean the pump filter. Do not
attempt to remove the filter if the machine is
full of water. Check whether the drain hose is
bent or not. If there is a need to clean the
pump filter, refer to the pump filter cleaning
section on page 15.
Have you plugged in and switched on at
the socket? Check the power cable, or for a
blown fuse. Check the front door is properly
closed.
After your machine starts operation, if
Start/Pause/Cancel button starts flashing then
door is not locked. Open and close the door
again and press Start/Pause/Cancel button to
begin washing program again.
Pre-wash indicator light on the program
follower is blinking
Cancel child lock
Machine does not take in water
•
•
•
Check the door for proper closure. Either
tap closed or water inlet filter is clogged.
Turn the programme selector to the
programme required.
If the “wash” led on the program progress
display and Start/Pause/Cancel button are
flashing either there is no water or tap is
off. Check your taps. Press
Start/Pause/Cancel button. If the problem
persists unplug your machine, turn off tap
water and call customer service.
Water is syphoned / discharged
Check if the drain hose is positioned as
described on page 6.
If the machine vibrates or is too noisy
•
Have all the transit bolts and packing been
removed?
•
•
•
•
Is the machine touching something?
Are all the feet resting firmly on the ground?
Have the lock nuts been secured?
Has the recommended wash load been
exceeded? (See page 13 for max program
loads)
Water coming from beneath the machine
Check the water inlet and drain hoses.
Tighten the connections. The washers of the
hoses may be worn out or the pump filter may
not have been closed properly.
Foam coming out of the detergent dispenser
Check whether your detergent is suitable
for automatic machines. Next time use less
detergent.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
guarantee
Your new Beko product is guaranteed against
the cost of breakdown repairs for twelve months
from the date of the original purchase.
separately from your retailer).
Important notes.
•
Your Beko product is designed and built for
domestic household use only.
What is covered?
•
Repairs necessary as a result of faulty
materials, defective components or
manufacturing defect.
The cost of functional replacement parts,
but excluding consumable items.
The labour costs of a Beko approved repairer
to carry out the repair.
•
The guarantee will be void if the product is
instalindicator light or used in commercial
or non-residential domestic household
premises.
The product must be correctly instalindicator
light, located and operated in accordance
with the instructions contained in the User
Instructions Booklet provided.
Professional installation by a qualified
Electrical Domestic Appliance Installer is
recommended for all Washing Machines,
Dishwashers and Electric Cookers
Gas Cookers must only be instalindicator
light by a CORGI (or BORD GAIS) registered
Gas Installer.
The guarantee is given only within the
boundaries of the United Kingdom and the
Republic of Ireland.
•
•
•
•
What is not covered?
•
•
•
Transit, delivery or accidental damage or
misuse and abuse.
Cabinet or appearance parts, including
knobs, flaps, handles or container lids.
Accessories or consumable items including
but not limited to, ice trays, scrapers, cutlery
baskets, filters and light bulbs.
Repairs required as a result of unauthorised
repair or inexpert installation that fails to
meet the requirements contained in the user
instruction book.
Repairs to products used on commercial or
non-residential household premises.
Loss of frozen food in freezers or
fridge/freezers. (Food loss insurance is often
included within your household contents
insurance policy, or may be available
•
•
•
•
The guarantee is applicable only to new
products and is not transferable if the
product is resold.
Beko disclaims any liability for incidental or
consequential damages.
•
•
•
•
The guarantee does not in anyway diminish
your statutory or legal rights.
service
Please keep your purchase receipt or other
Republic of Ireland
All Refrigeration,
All Cookers
Washing Machines &
Dishwashers
proof of purchase in a safe place; you will need
to have it should the product require attention
under guarantee.
01 862 3411
You should also complete the details below;
it will help us assist you when requesting service.
(The model number is printed on the Instruction
Booklet and the serial number is printed on
the Rating Label affixed to the appliance)
Before requesting service please check the
trouble-shooting guide in the Operating
Instructions as a charge may be levied where
no fault is found even though your product
may still be under guarantee.
Service once the manufacturers
guarantee has expired.
Model No:
Serial No:
If you have purchased an extended
guarantee please refer to the instructions
contained within the extended guarantee
agreement document. Otherwise please call
the appropriate number above where service
can be obtained at a charge.
Retailer:
Date of purchase:
For service under guarantee simply telephone
the appropriate number below
Should you experience any difficulty in
obtaining service please contact the Beko
Customer Help-Line.
UK Mainland & Northern Ireland
Fridges & Freezers
Electric Cookers
Gas &
0870 241 0638
0870 241 1320
0870 241 1321
Tel: 0870 774 1050
e-mail:[email protected]
Dual Fuel Cookers
Washing Machines & 0870 241 0357
Dishwashers
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Beko plc Beko House, Caxton Way, Watford
Hertfordshire, WD18 8UF
Tel: 0870 7741050
Email: [email protected]
Fax: 08707741090
Download from Www.Somanuals.com. All Manuals Search And Download.
|