Automatic
Washing Machine
WMB81445L
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1 Your Washing Machine
4
Starting the Program . . . . . . . . . . . . . . 21
Progress of program . . . . . . . . . . . . . . 21
Changing the selections after the program
has started . . . . . . . . . . . . . . . . . . . . . 22
Switching the machine to standby mode22
Child-proof lock. . . . . . . . . . . . . . . . . . 22
Ending the program through canceling 22
Program in rinse hold mode. . . . . . . . . 22
End of program . . . . . . . . . . . . . . . . . . 23
Overview . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . 5
2 Warnings
6
General Safety. . . . . . . . . . . . . . . . . . . . 6
First Use . . . . . . . . . . . . . . . . . . . . . . . . 6
Intended use . . . . . . . . . . . . . . . . . . . . . 6
Safety instructions . . . . . . . . . . . . . . . . . 6
If there are children in your house... . . . . 7
Electrical connection . . . . . . . . . . . . . . . 7
6 Quick instructions for daily use24
7 Cleaning and care
26
3 Installation
9
Detergent drawer. . . . . . . . . . . . . . . . . 26
The door and the drum . . . . . . . . . . . . 26
Outer cabinet and control panel. . . . . . 26
Inlet water filters. . . . . . . . . . . . . . . . . . 26
Draining any remaining water and cleaning
the pump filter . . . . . . . . . . . . . . . . . . . 27
Removing packaging reinforcement. . . . 9
Opening the transportation locks. . . . . . 9
Appropriate installation location . . . . . . . 9
Adjusting the feet. . . . . . . . . . . . . . . . . . 9
Connecting to the water supply. . . . . . 10
Connecting to the drain . . . . . . . . . . . . 10
Electrical connection . . . . . . . . . . . . . . 11
Destroying the packaging material. . . . 11
Disposing of the old machine. . . . . . . . 11
8 Solution suggestions for
problems
29
35
36
9 Guarantee
10 Service
4 Initial preparations for washing12
Sorting the laundry . . . . . . . . . . . . . . . 12
Preparing clothes for washing . . . . . . . 12
Correct load capacity . . . . . . . . . . . . . 12
Loading door. . . . . . . . . . . . . . . . . . . . 13
Detergents and softeners . . . . . . . . . . 13
5 Selecting a Program and
Operating Your Machine
15
Control panel. . . . . . . . . . . . . . . . . . . . 15
Display symbols. . . . . . . . . . . . . . . . . . 15
Turning the machine on . . . . . . . . . . . . 16
Program selection . . . . . . . . . . . . . . . . 16
Additional programs . . . . . . . . . . . . . . 16
Special programs . . . . . . . . . . . . . . . . 17
Temperature selection . . . . . . . . . . . . . 17
Spin Speed selection. . . . . . . . . . . . . . 18
Program and consumption table . . . . . 19
Auxiliary functions . . . . . . . . . . . . . . . . 20
Time display . . . . . . . . . . . . . . . . . . . . 20
Download from Www.Somanuals.com. All Manuals Search And Download.
3 - EN
1
Your Washing Machine
Overview
3
4
1
2
5
6
4 - Control Panel
5 - Filter Cap
1 - Detergent Drawer
2 - Door
6 - Height-adjustable feet
3 - Top Lid
Download from Www.Somanuals.com. All Manuals Search And Download.
4 - EN
Specifications
Models
WMB81445L
Maximum dry laundry capacity (kg)
Height (cm)
8
84
Width (cm)
60
59
Depth (cm)
Net Weight (±4 kg)
Electricity (V/Hz.)
Total Current (A)
Total Power (W)
Spinning cycle (rpm max.)
75
230 V / 50Hz
10
2200
1400
Specifications of this appliance may change without notice to improve the quality of the
product. Figures in this manual are schematic and may not match your product exactly.
Values stated on the machine labels or in the documentation accompanying it are obtained
in laboratory in accordance with the relevant standards. Depending on operational and
environmental conditions of the appliance, values may vary.
Download from Www.Somanuals.com. All Manuals Search And Download.
5 - EN
2
Warnings
Please read the following information.
Otherwise, there may be the risk of
personal injury or material damage.
Moreover, any warranty and reliability
commitment will become void.
First Use
•
To prepare your machine for washing,
carry out your first washing process
without loading your machine and
with detergent under “Cottons 90°C”
Programme.
•
•
Ensure that the cold water connections
has been made correctly when installing
your machine.
If the current fuse or circuit breaker is
less than 13 Amperes, please have a
qualified electrician install a 13 Ampere
fuse or circuit breaker.
To make your machine ready for use,
please be sure that the tap water
supply and water drainage systems
are appropriate before calling the
Authorised service. If they are not, call a
qualified plumber to have any necessary
arrangements carried out.
General Safety
•
Never place your machine on a carpet
covered floor. Otherwise, lack of airflow
from below your machine may cause
electrical parts to overheat. This may
cause problems with your washing
machine.
If the power cable or mains plug is
damaged you must call Authorised
Service for repair.
•
•
•
•
Check water hoses for wear. Do not use
old/used water inlet hoses. These may
cause stains on your laundry.
Fit the drain hose into the waste water
system securely to prevent any water
leakage and to allow machine to take
in and discharge water as required. It is
very important that the water intake and
drain hoses are not folded, squeezed,
or broken when the appliance is pushed
into place after it is installed or cleaned.
Your washing machine is designed to
continue operating when the power
restores after a power interruption.
You cannot cancel any Programme
by pressing the “On/Off button.” The
machine will resume its Programme
when the power restores. Press the
“Start/Pause/Cancel” button for 3
seconds to cancel the Programme (See,
Cancelling a Programme)
Intended use
•
This product has been designed for
home use.
The appliance may only be used for
washing and rinsing of textiles that are
marked accordingly.
Only detergents, softeners and
supplements suitable for washing
machines may be used.
Observe the care instructions labelled
on textile products and any other
instructions given by companies that
produce detergents for your machine.
Children should be supervised to ensure
that they do not play with the appliance.
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
•
•
•
•
•
•
•
•
There may be some water in your
machine when you receive it. This is
from the quality control process and
is normal. It is not harmful to your
machine.
Some problems you may encounter
may be caused by the software. Press
“Start/Pause/Cancel” button for 3
seconds to cancel the Programme
set in your machine before calling the
Authorised service.
Safety instructions
•
This appliance must be connected to
an earthed outlet protected by a fuse of
suitable capacity.
•
The supply and draining hoses must
Download from Www.Somanuals.com. All Manuals Search And Download.
6 - EN
always be securely fastened and remain
in an undamaged state.
Fit the draining hose to a washbasin or
waste system securely before starting
up your machine. There may be a risk
of being scalded due to high washing
temperatures!
Never open the door or remove the filter
while there is still water in the drum.
Otherwise, there may be the risk of
flooding and possible injury due to the
hot water.
Never force open the locked door! The
door will be ready to open just a few
minutes after the washing cycle comes
to an end.
Electrical connection
Make sure that you have an earthed power
outlet socket rated at 13 amps (minimum).
Attention!
•
•
•
If you place your machine under a worktop,
the socket must be reachable after
installation, or a separate switch (which can
disconnect the two poles) must be used in
the installation.
Connect the power cord to the appropriate
electrical socket with an equivalent current
rating indicated on the rating plate at the
front of the machine behind the kick plate.
After removing the plug from its transit
position, please insert the plug seal to
prevent water spillage entering the machine.
•
•
Unplug the machine when it is not in
use.
Electrical requirements
Never wash down the appliance with a
water hose! There is the risk of electric
shock! Always disconnect from the
mains by unplugging before cleaning.
Never touch the plug with wet hands.
Never unplug by pulling on the cable,
always pull out from the plug only. Do
not operate the machine if the power
cord or plug is damaged.
Never attempt to repair the machine
yourself. Otherwise, you may be putting
yours and other’s lives in danger.
For malfunctions that cannot be solved
by information in the operating manual:
Turn off the machine, unplug it, turn
off the water tap and contact an
Authorised service agent.
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a suitable
switched and fused socket in a readily
accessible position.
•
Should the mains lead of the appliance
become damaged or need replacing at
any time, it must be replaced by a special
purpose made mains lead which can only
be obtained from a Authorised Service
Agent.
•
•
BThis appliance must be earthed
If the fitted moulded plug is not suitable for
your socket, then the plug should be cut off
and an appropriate plug fitted.
Destroy the old plug, which is cut off as a
plug with a bare cord could cause a shock
hazard if inserted into a socket elsewhere in
the house.
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse
need to be replaced an ASTA approved
BS1362 fuse of the same rating must be
used. Do not forget to refit the fuse cover.
In the event of losing the fuse cover, the
plug must not be used until a replacement
fuse cover has been fitted. Colour of the
replacement fuse cover must be the same
colour as that visible on the pin face of the
If there are children in your
house...
•
Electrical appliances may be dangerous
for the children. Keep children away
from the machine when it is operating.
Do not let them tamper with the
machine.
•
•
•
Close the door when you leave the area
where the machine is located.
Store all detergents in a safe place out
of reach of the children.
Use Child/Keylock to prevent children
altering the settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7 - EN
plug. Fuse covers are available from any
good electrical store.
Important
Fitting a different plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals on your plug, proceed as follows:
1
Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol f or
coloured green and yellow or green.
Connect the blue (neutral) wire to the
terminal in the plug marked ‘N’ or
coloured black.
Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
2
3
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or in the
main fuse box. If in doubt contact a qualified
electrician.
Download from Www.Somanuals.com. All Manuals Search And Download.
8 - EN
3
Installation
Removing packaging
reinforcement
Tilt the machine to remove the packaging
reinforcement. Remove the packaging
reinforcement by pulling the ribbon.
Keep the transportation safety bolts in
a safe place to reuse when the washing
machine needs to be moved again in
the future.
Never move the appliance without the
transportation safety bolts properly fixed
in place!
C
C
Appropriate installation location
Install the appliance in environments which
have no risk of freezing, in a stable and level
position.
The floor must be capable of carrying
C
the load on it!
If the washing machine and a drier
C
Opening the transportation locks
are placed on top of each other, their
approximate weight together may reach
180 kg when they are full.
Transportation safety bolts must be
C
removed before operating the washing
machine! Otherwise, the machine will be
damaged!
Important:
•
•
•
Do not place the appliance on top of
the power cable.
Keep at least 1cm distance from the
edges of other furniture.
Place the machine on a firm surface; do
not position it on a long pile rug or such
like surfaces.
1. Loosen all the bolts with a spanner until
they rotate freely (“C”)
Adjusting the feet
Do not use any tools to loosen the lock
C
2. Remove transportation safety bolts by
turning them gently.
nuts. Otherwise, they can be damaged.
1. Manually (by hand) loosen the lock nuts
on the feet.
2. Adjust them until the machine stands
level and firm.
3. Important: Tighten all lock nuts up
again.
3. Fit the covers (supplied in the bag with
the Operation Manual) into the holes on
the rear panel. (“P”)
Download from Www.Somanuals.com. All Manuals Search And Download.
9 - EN
Connecting to the water supply.
Important:
•
The water supply pressure required to
run the machine must be 1-10 bar (0,1
– 1 MPa). (Practically, it is necessary
to have 10 – 80 liters of water flowing
from the tap in one minute to have
your machine run smoothly.) Attach a
pressure-reducing valve if the water
pressure is higher.
•
Models with a single water inlet should
not be connected to the hot water
tap. Laundry may be damaged or the
appliance may switch to protection
mode and not work.
•
Connect the special hose supplied with
the machine to the water intake valves
on the machine.
When returning the appliance to its place
after maintenance or cleaning, care should
be taken not to fold, squeeze or block the
hoses.
Connecting to the drain
The water discharge hose can be attached
to the edge of a washbasin or waste water
system. The drain hose should be firmly
fitted into the drain as to not loosen in its
housing.
•
In order to prevent water leakage that
may occur at the connection points,
there are rubber seals (4 seals for the
models with double water inlet and 2
seals for other models) attached to the
hoses. These seals should be used at
the tap and machine connection ends
of the hoses. The plain end of the hose
fitted with a filter must be attached to
the tap and the elbowed end must be
attached to the machine. Tighten the
nuts of the hose well by hand; never
use wrenches to tighten the nuts.
Open the taps completely after making
the hose connection to check if there
is any water leakage at the connection
points. Turn off the tap and remove the
nut in case of any leakage. Retighten
the nut carefully after checking the seal.
To prevent any water leakage and any
other damage to be caused by it, keep
the taps closed when the machine is
not in use.
Important:
•
The end of the drain hose can be
directly connected to the wastewater
drain or to the washbasin. The
fitting must be secured in all types
of connections. Your house may be
flooded if the hose falls out of its
housing during water discharging.
The hose should be attached to a
height of at least 40 cm, and 100 cm at
most.
•
•
•
In case the hose is elevated after
laying it on the floor level or close to
the ground (less than 40 cm above the
Download from Www.Somanuals.com. All Manuals Search And Download.
10 - EN
ground), water discharge becomes
more difficult and the laundry may
come out wet. Therefore, the heights
described in the figure should be
followed.
To prevent dirty water refilling the
machine, and to allow for easy
Destroying the packaging
material
Packaging material can be dangerous to
children. Keep the packaging materials out
of reach of children or dispose them by
classifying according to waste directives. Do
not dispose of them together with normal
domestic waste.
•
discharge, the end of the hose must not
be submerged in the drain water. The
end of the hose must be able to take in
air. The hose should be pushed into the
drainage for more than 15 cm. If it is too
long you may have it shortened.
The end of the hose should not be bent,
it should not be stepped on and it must
not be folded between the drain and the
machine.
The length of the hose is too short,
you may add an extension hose to the
original section. The length of the hose
must not be longer than 3.2 m after
coming out of the machine. To avoid
water leakage failures, the connection
between the extension hose and the
drain hose of the product must be fitted
well with an appropriate clamp as not to
come off and leak.
Packaging materials of your machine are
manufactured from recyclable materials.
Disposing of the old machine
Dispose of your old appliance in an
environmental friendly manner.
•
•
•
You may refer to your local agent or
solid waste collection center in your
municipality to learn how to dispose of
your machine.
Before disposing of your old washing
machine, cut off the mains plug and make
the door lock unusable.
Electrical connection
Connect the machine to an earthed outlet
protected by a fuse of suitable capacity.
Important:
•
•
•
Connection should comply with national
regulations.
Power cord plug must be within easy
reach after installation.
The voltage and the allowed fuse
protection are specified in the section
“Technical Specifications”.
•
•
The specified voltage must be equal to
your mains voltage.
Connection via extension cords or multi-
plugs should not be made.
A damaged power cable must be
replaced by a qualified electrician.
A faulty appliance must not be operated
whilst faulty until it has been repaired!
There is the risk of electric shock!
B
B
Download from Www.Somanuals.com. All Manuals Search And Download.
11 - EN
4
Initial preparations for washing
clips. If possible, turn pockets out and
Sorting the laundry
brush.
•
Sort the laundry according to type of
fabric, colour, and degree of soiling and
permissible water temperature.
Always follow the advice on the garment
labels.
•
Place small items like infants’ socks and
nylon stockings, etc. in a laundry bag,
pillow case or something similar. This
will also save your laundry from getting
lost.
•
•
•
Place curtains in the machine with care.
Remove curtain rails and pullers.
Fasten zippers, sew loose buttons and
mend rips and tears.
Wash “machine washable” or “hand
washable” labelled products only with
an appropriate Programme.
Do not wash colours and whites
together. New, dark coloured cottons
may release a lot of dye. Wash them
separately.
Non machine
Washing water
Wash with
Do not wash
washable
temperature sensitive, short
programmes.
•
Bleach can be Do not use
Dry-cleanable
Do not
dry-clean
used
bleach
•
•
Tough stains must be treated properly
before washing. If you are not sure,
check with a dry cleaner.
Use only dyes/colour changers and lime
removers suitable for machine wash.
Always follow the instructions on the
packaging.
Suitable for
drier
Do not dry
with drier
Dry
horizontally
Dry on a
hanger
•
•
Wash trousers and delicate clothes
turned inside out.
Keep laundry items made of Angora
wool in the freezer for a few hours
before washing. This will reduce pilling.
Hang without Can be ironed
Can be
Do not iron
spinning
with hot iron ironed with
warm iron
Preparing clothes for washing
Laundry items with metal attachments such
as, bras, belt buckles and metal buttons
will damage the machine. Remove metal
attachments or place the items in a clothing
bag, pillow case, or something similar.
Correct load capacity
•
The maximum load capacity depends
on the type of laundry, the degree of
soiling and the washing Programme you
wish to use.
The machine adjusts the amount of
water according to the amount of
laundry placed inside.
C
C
Please follow the information in the
"Programme Selection Table". Washing
results will degrade when the machine
is overloaded.
•
Empty pockets and remove all foreign
objects such as coins, pens and paper
Download from Www.Somanuals.com. All Manuals Search And Download.
12 - EN
Following weights are given as examples.
Detergent, softener and other cleaning
agents
Add detergent and softener before starting
the washing Programme.
Laundry type
Bathrobe
Napkin
Weight (gr.)
1200
100
Never open the detergent dispenser drawer
while the washing Programme is running!
When using a Programme without pre-
wash, no detergent should be put into the
pre-wash compartment (Compartment no.
I).
A Programme without pre-wash should be
selected if a detergent bag or a dispensing
ball is going to be used. You can place the
detergent bag or the dispensing ball directly
among the laundry in your machine.
Duvet cover
Bed Sheet
Pillowcase
Tablecloth
Towel
700
500
200
250
200
Evening gown
Underclothing
Men’s overalls
Men’s shirt
Men’s pyjamas
Blouse
200
100
600
200
500
100
Choosing the detergent type
The type of detergent to be used depends
on the type and colour of fabric.
•
•
•
Use different detergents for coloured
and white clothes.
Wash woollen with a special detergent
specifically for woollens.
Use only detergents manufactured
specifically for automatic washing
machines.
Loading door
The door is locked during Programme
operation. The door can be opened after
some time following the Programme end.
•
•
Open the door.
Place laundry items loosely in the
machine.
Push the door until it clicks into place
tightly. Ensure that no items are caught
in the door.
•
Detergent quantity
The amount of washing detergent to be
used depends on the amount of laundry, the
degree of soiling and water hardness.
Detergents and softeners
Detergent drawer
The detergent drawer is composed of three
compartments:
•
Do not use amounts exceeding the
quantities recommended on the
package to avoid problems of excessive
foam, poor rinsing, financial savings and
finally, environmental protection.
Use small amounts of detergent at a
suitable measure for small amounts of
laundry or for only slightly soiled laundry.
Use exact measures for highly
The detergent dispenser may be in two
different types according to the model of
your machine.
•
•
- (I) for prewash
- (II) for main wash
- (III) siphon
– ( ) for softener
concentrated detergents.
Detergent
quantity
1/2 measure
for prewashing
for main washing
1 measure
an additional 1/2
measure
with hard water
Download from Www.Somanuals.com. All Manuals Search And Download.
13 - EN
Softener
Put the softener into the softener
compartment of the detergent dispenser.
•
Use the proportions recommended on
the packet.
Never exceed the (> max <) level
marking; otherwise, the softener will be
wasted without being used.
If the softener has lost its fluidity, dilute
dense softener with water before
placing it in the detergent drawer.
•
•
Liquid detergent
When using liquid or gel washing
detergents, please note the following:
•
The liquid detergent may leave stains
on your laundry if time delay feature is
selected.
•
•
•
Do not use liquid detergent if you want
to wash using the time delay feature.
Do not use liquid detergent for the main
wash in a cycle with pre-wash.
Use the detergent manufacturer’s
measuring cup and follow the
instructions on the package.
Starch
•
Add liquid starch, powder starch
or the fabric dye into the softener
compartment as instructed on the
package.
•
•
Never use fabric softener and starch
together in the same washing cycle.
Wipe the inside of the drum after using
starch.
Eliminating lime formation
•
When required, use only appropriate
lime removers developed specifically for
washing machines and always follow
the instructions on the package.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 - EN
5
Selecting a Program and Operating Your Machine
Control panel
1
2
3
4
5
6
7
8
1
2
3
4
-
-
-
-
Spin Speed Adjustment Button
Display
Temperature Adjustment Button
Program Selection Knob
5
6
7
8
-
-
-
-
On/Off Button
Time Delaying Button (+/-)
Auxiliary Function Buttons
Start/Pause/Cancel Button
a
b
- Spin Symbol
- Spin Speed Indicator
Display symbols
c – Water cut-off symbol (According to
your machine’s model)
a
b
c d e
f
d
e
f
g
h
i
- Economy Symbol
- Temperature Indicator
- Temperature Symbol
- Door Locked Symbol
- Standby Symbol
m
g
h
i
F3
- Start Symbol
F1
F2
F4
j
k
- Auxiliary Function Symbols
- Remaining Time and Delaying Time
Indicator
- Program Indicator Symbols (pre-wash/
main wash/rinse/softener/spin)
- Time Delaying Symbol
l
k
j
l
m
Download from Www.Somanuals.com. All Manuals Search And Download.
15 - EN
is recommended. Detergent should not be
put in the pre-wash compartment. Less
detergent should be put in the main wash
compartment as loose knit fabrics (lace)
foam too much due to its meshed structure.
• Woollens
Turning the machine on
Plug in your machine. Turn the tap on
completely. Check if the hoses are
connected tightly. Place the laundry in the
machine. Add detergent and softener. Press
the “On/Off” button.
You can wash your machine-washable
woolen garments on this program. Wash
by selecting the proper temperature
according to the labels of your clothes.
It is recommended to use appropriate
detergents for woolens.
Additional programs
For special cases, there are also extra
programs available:
Program selection
Select the appropriate program from the
program table according to type, amount
and degree of soiling of the laundry and
washing temperatures.
Turn the Programme Selection Knob to the
program mode that you wish to wash your
laundry.
The recommended temperature and spin
speed for the selected program appear.
Press “Start/Pause/Cancel” button to start
the program.
Additional programs may differ
according to the model of your
machine.
C
• Cottons Eco
Main programs
You may wash your laundry to be washed in
cottons Programme in longer periods which
ensure very good washing performance.
Depending on the type of textile, the
following main programs are available:
Each of these main programs comprise
of a complete washing process, including
washing, rinsing and, if required, spin
cycles.
Cottons economy Programme
C
consumes less energy compared to
other cottons Programmes.
• Baby+Toddler Clothing
When selecting the program you are
A
Increased hygiene is provided by a longer
heating period and an additional rinse cycle.
It is recommended for baby clothes and
clothes worn by allergic people.
• Delicates
going to use, always consider type
of fabric, color, degree of soiling and
permissible water temperature.
Always select the lowest required
temperature. Higher temperature means
higher power consumption.
For further program details, see
“Program Selection Table”
A
You can wash your delicate clothes
at this program. It has more sensitive
washing movements and does not
make intermediate spinning compared
to “Synthetic” program. It must be used
for clothes for which sensitive washing is
recommended.
C
• Cottons
You can wash your durable clothes with
this program. Your laundry will be washed
with vigorous washing movements during
a longer washing cycle. It is recommended
for your cotton items (such as bed sheets,
duvet and pillowcase sets, bathrobes,
underclothing, etc.).
• Hand Wash
You can wash your woolen/delicate clothes
that bear “not machine- washable” labels
for which hand wash is recommended on
this program. It washes the laundry with
very tender washing movements without
damaging your clothes.
• Synthetics
You can wash your less durable clothes on
this program. Gentler washing movements
and a shorter washing cycle is used
compared to the “Cottons” program. It is
recommended for your synthetic clothes
(such as shirts, blouses, synthetic/cotton
blended garments, etc.). For curtains and
lace, the “Synthetic 40” program with pre-
wash and anti-creasing functions selected
• Daily Quick
This program is used to wash lightly soiled
and unstained cotton garments in a short
time.
• Xpress Super Short
You can use this program to quickly wash a
small number of lightly soiled and unstained
Download from Www.Somanuals.com. All Manuals Search And Download.
16 - EN
cotton garments. E.g.: bathrobes, duvet
covers, sport wear, daily clothes and etc.
used only once.
Sort the laundry according to type
of fabric, color, degree of soiling and
permissible water temperature while
choosing a program.
Always select the lowest required
temperature. Higher temperature means
higher power consumption.
C
• A Class 40
This programme washes for a longer
period at 40°C and gives the same result
as the “Cottons 60°C” programme, thus it
saves energy. It is suitable for clothes for
which you cannot use the “Cotton 60°C”
programme.
C
C
For further program details, see
“Program Selection Table”
Special programs
For specific applications, select any of the
following programs:
• Shirts
• Rinse
You can use this program to wash the shirts
made of cotton, synthetic and synthetic
blended fabrics.
This program is used when you want to
rinse or starch separately.
• Spin+Drain
• Fashion Care
This program spins with maximum possible
rpm in the default setting after the water
drains from the machine.
Use a lower spin speed for delicate
laundries.
Temperature selection
You can use this program to wash your
laundry that bear “viscous and viscous
blends” labels or which are advised to
be washed with delicate programs. It
cleans your laundry without causing
any deformation to them. E.g.: Blouses,
dresses, skirts and etc.
C
Whenever a new program is selected, the
temperature anticipated for that program
appears on the temperature indicator .
To change the temperature, press the
temperature button. Temperature decreases
in 10° increments.
• Sports
This programme is suitable for clothes that
are normally worn for a short time such as
sportswear. It is used to quickly wash a
small amount of cotton/synthetic blended
clothes.
Cold selection is shown with “-” symbol.
• Duvet
You can also wash your machine-washable
fiber duvets with this program.
You must not load more than 1 piece of
fiber duvet for two persons.
C
When the “Temperature” button is pressed
after Cold is selected, the maximum
temperature of the program you have
selected will be displayed.
To decrease the temperature, press the
“Temperature” button again.
Normally soiled, white cottons and
90˚C linens. (Ex.: coffee table covers,
tablecloths, towels, bed sheets)
Normally soiled, fade proof colored
linens, cottons or synthetic clothes
60˚C (Ex.: shirts, nightgowns, pajamas)
and lightly soiled white linen clothes
(Ex.: underwear)
Each of these main programs comprise
of a complete washing process, including
washing, rinsing and, if required, spin
cycles.
40˚C
Blended clothes including synthetics
30˚C
and woolens as well as delicates.
Cold
Download from Www.Somanuals.com. All Manuals Search And Download.
17 - EN
Economy Symbol
Shows energy saving programs and
temperature selections.
As “Intensive” and “Hygiene” programs are
long programs with higher temperature
selections to ensure hygiene, “Economy”
Symbol will not light up.
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator.
To decrease the spin speed, press the
“Spin” button. Spin speed decreases
gradually. Then, rinse hold and no spin
options are shown respectively.
Rinse hold is shown with “ ” and no spin
is shown with “ ” symbols.
If you are not going to unload your clothes
immediately after the cycle, you may use
rinse hold function in order to prevent your
clothes become wrinkled when there is no
water in the machine. With this function,
your laundry is kept in the final rinsing water.
If you want to spin your laundry after the
rinse hold function:
-
-
Adjust the spin speed.
Press “Start/Pause/Cancel” button.
Program resumes. Your machine drains
the water and spins your laundry.
You can use no spin function in order to
drain the water without spinning at the end
of the program.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 - EN
Program and consumption table
EN
Auxiliary functions
2
Selectable temperature
range °C
Programme
Cottons
Cottons
Cottons
Duvet
90
8
8
8
-
70
70
70
55
93
76
42
65
65
65
36
54
54
56
56
66
55
54
45
2.60
1.75
0.90
0.75
2.70
1.28
0.10
2.22
1.05
0.28
0.43
0.76
0.53
0.90
0.50
0.58
1.15
0.44
0.31
0.19
max.
max.
max.
800
max.
max.
***
•
•
•
•
•
•
•
•
•
•
*
•
•
•
•
•
•
•
•
•
90-Cold
90-Cold
90-Cold
60-40
60
40
40
Baby&Toddler Clothing 90
8
8
2
8
8
8
3
8
8
4
4
4
4
3
2
•
•
•
•
•
•
•
90-40
A Class 40
Xpress Super Short
Daily Quick
Daily Quick
Daily Quick
Fashion Care
Cottons Eco
Cottons Eco
Synthetics
Synthetics
Sports
40
30
90
60
30
40
60**
40
60
40
40
60
40
40
40
•
•
•
•
•
•
•
•
•
•
•
•
•
30-Cold
90-Cold
90-Cold
90-Cold
40
***
***
***
600
max.
max.
800
800
800
600
600
600
600
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
*
•
•
•
•
•
•
•
•
60-40
60-40
60-Cold
60-Cold
40-Cold
60-Cold
40-Cold
40-Cold
30-Cold
Shirts
Delicates
•
•
•
Woollens
Hand Wash
30 1.5 33
• : Selectable
* : Automatically selected, not cancellable.
** : Energy Label programme (EN 60456)
*** If maximum spin speed of your machine is lower, selection may be made until maximum
spin speed.
- : See program description for maximum load.
The auxiliary functions in the table vary according to the model of your machine.
C
C
Water and power consumption and program duration differ from the table subject to
changes in water pressure, water hardness and temperature, ambient temperature,
type and amount of laundry, selection of auxiliary functions, and changes in supply
voltage.
Program duration will be displayed on the screen of your machine according to your
C
selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
19 - EN
slightly soiled laundries.
• Extra Rinse
When this function (c) is selected, washing
and rinsing is performed with plenty of
water. “F3” symbol lights up on the display.
• Anti- Crease
Auxiliary functions
Auxiliary Function Selection Buttons
With this function (d), drum movement
will be lessened to prevent creasing and
spinning speed is limited. In addition,
washing is carried out at a higher water
level. “F4” symbol lights up on the display.
•
Use this function for delicate laundries
that crease easily.
Whenever you select this auxiliary
function, load your machine with half of
the maximum laundry specified in the
program table.
a
b
c
d
C
•
Depending on the program, you can
select the desired auxiliary function by
pressing the buttons a, b, c,d.
Select the required auxiliary functions
before starting the program.
Some combinations cannot be selected
together. Ex.: Pre-wash and Quick
Wash.
• Rinse Hold
•
•
If you are not going to unload your clothes
immediately after the program completes,
you may use rinse hold function and keep
your laundry in the final rinsing water in order
to prevent them become wrinkled when
there is no water in the machine. Press
“Start/Pause” button after this process if you
want to drain the water without spinning.
Program resumes. Your machine drains the
water and program completes.
If you want to spin your laundry that you left
in water:
- Adjust the spin speed.
- Press Start/Pause button
•
Symbol of the selected auxiliary function
will light up.
Auxiliary function selection
If an auxiliary function that should not be
selected together with a previously selected
function is chosen, the first selected function
will be cancelled and the last auxiliary
function selection will remain active.
Ex.: If you want to select pre-wash first and
then quick wash, pre-wash will be cancelled
and quick wash will remain active.
Auxiliary function that is not compatible
with the program cannot be selected. (see,
“Program Selection Table”)
Program resumes. Your machine drains
the water, spins the laundry and program
completes.
Time display
The display shows the time remaining for
the program to complete while a program
is running. Time is displayed in hours and
minutes as “01:30”.
• Prewash
When you select this function (a), the display
will indicate “F1” symbol.
•
A pre-wash is only worthwhile for
heavily soiled laundry. Without pre-wash
you save energy, water, detergent and
time.
Pre-wash without detergent is
recommended for lace and curtains.
•
• Quick Wash
With this function (b), the wash time is
shortened. “F2” symbol lights up on the
display.
Time delay
With the “Time delay” function you can
delay the program start up to 24 hours.
Setting can be made in intervals of 30
•
Use this function for smaller amounts or
Download from Www.Somanuals.com. All Manuals Search And Download.
20 - EN
minutes.
be displayed.
4. Press Start/Pause/Cancel Button to
start the program.
1. Open the loading door, place the
laundry inside and fill detergent drawer.
2. Set the washing program, temperature,
spin speed and, if required, select the
auxiliary functions.
Starting the Program
1. Press Start/Pause/Cancel button to
start the program.
3. Press “Time delaying” buttons “+” and
“-” to set your desired time delay. The
Time delaying symbol will flash.
4. Press “Start/Pause/Cancel” button.
Then the time delay starts to count
down. The Time delaying symbol will
light up. The Start symbol will light up.
The “:” in the middle of the displayed
time delay will start to flash.
2. The start symbol which indicates that
the program has started will light up.
3. The door locks and the door locked
symbol will light up.
4. The Symbol of the relevant step
(prewash, main wash, rinse, softener
and spin) that the program has started
from will light up.
More laundry may be loaded or taken
•
out during the time delay period. At
the end of the time delay countdown
process, time delaying symbol fades
and the washing starts as the program
duration is displayed.
Progress of program
The progress of a running program is shown
through a number of symbols on the screen.
At the beginning of each program step,
•
the relevant symbol in the series of
symbols will light up and thus, at the
end of the program, all symbols will
remain lit up. The symbol that lights up
at the far right of the series of symbols
indicates the step that is being carried
out.
Changing the delay time
If you want to change the time during the
countdown:
1. Press “Start/Pause/Cancel” button. “
: “ in the middle of the screen will stop
flashing. The Standby symbol will light
up. The Time delaying symbol will flash.
The Start Symbol will fade.
2. Press “Time delaying” buttons “+” or “-”
to set your desired time delay.
3. Press “Start/Pause/Cancel” button. The
Time delaying symbol will light up. The
Standby symbol will fade. The Start
symbol will light up.
4. The “:” in the middle of the displayed
time delay will start to flash.
Pre-wash
When “prewash” auxiliary function is
selected, prewash symbol will light up to
indicate the beginning of prewash step.
Main wash
Main wash symbol will light up to indicate
that the main wash cycle has started.
Rinse
Rinse symbol lights up at the beginning of
the rinse step.
Softener
Softener symbol lights up at the beginning
of softener step.
Spin
Canceling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
Spin symbol will light up at the beginning
of the final spin, during “Spin” and “Pump”
special programs.
1. Press “Start/Pause/Cancel” button. The
“:” in the middle of the displayed time
delay will stop flashing.
2. Start symbol will fade. The standby
symbol and the time delaying symbol
will flash.
3. Press time delaying button “-” to
decrease the desired time delay.
Program duration after 30 minutes shall
If the machine is not spinning, the
•
program may be in rinse hold mode or
the automatic spin correction system
has been activated due to an excessive
unbalanced distribution of laundry in the
machine.
Download from Www.Somanuals.com. All Manuals Search And Download.
21 - EN
In this case, no change can be made in the
running program.
Changing the selections after the
program has started
Your machine can be turned on and
C
The selected spin speed and program
temperature fade out. An empty frame
appears.
off with On/Off button while the child-
proof lock is activated. In this case, your
machine will resume its program with
child-proof lock activated.
When the “Program selection” button is
brought to the appropriate position, rpm
and temperature data reappear.
The machine is switched to child-lock by
pressing the 2nd and 4th auxiliary functions
for 3 sec. “C:on” (Child-proof lock is
activated) label appears on the display.
Switching the machine to
standby mode
The machine is switched to standby
mode by pressing “Start/Pause/Cancel”
button momentarily. The Standby symbol
which indicates the machine is in standby
mode lights up and the start symbol that
shows the program has started and is still
continuing fades out.
The same symbol will also be displayed
whenever any button is pressed while the
machine is child-locked.
To deactivate the child-proof lock, press the
2nd and 4th auxiliary function buttons for 3
sec.
“C:OFF” (Child-proof lock is deactivated)
label appears on the screen.
F3
F1
Selecting or canceling an auxiliary
function in pause mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Ending the program through
canceling
Adding/removing laundry in pause
mode
“Start/Pause/Cancel” button is pressed
for 3 seconds to cancel the program.
Start symbol will flash during cancellation.
After cancellation, the symbol of the
corresponding step at which the
cancellation was made will remain lit and
“End” will appear on the screen.
The door can be opened if the water level is
suitable. The door locked symbol will light
up until the door is suitable for opening. This
symbol will fade out as soon as the door is
allowed to open. Laundry may be added /
taken out by opening the door.
Door lock
The Door Locked Symbol lights up when
the loading door is locked. This symbol will
flash until the door is allowed to open. Do
not force the door at this stage. This symbol
will fade out as soon as the door is allowed
to open. You may open the door after the
symbol fades out.
Program in rinse hold mode
This process is shown with the flashing
•
Spin Symbol and the lit up Standby
Symbol.
Child-proof lock
If you wish to spin when the machine is in
this mode:
Protect the appliance from being tampered
by children by means of the child-proof lock.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 - EN
Adjust the spin speed. Press “Start/Pause/
Cancel” button. The program continues,
pumps out the water and spins. The
Standby Symbol fades out and Start
Symbol lights up.
If you want to discharge the water only
without spinning:
Press “Start/Pause/Cancel” button. The
Standby symbol will fade. The Start symbol
will light up. The program continues and
only drains the water.
End of program
When the program is finished, the symbols
of the relevant steps will remain lit up and
the auxiliary function, spin and temperature
data selected at the start-up of the program
will remain selected. “End” will appear on
the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
23 - EN
6
Quick instructions for daily use
Preparation
loading door or if the temperature in the
machine is low).
In order to add laundry after the start-up
of the programme:
1. Turn the tap on completely. Check that
the hose is connected tightly.
2. Place the laundry in the machine.
3. Add detergent and softener.
1. Press “Start/Pause/Cancel” button.
2. Open the loading door and put in more
laundry.
3. Close the loading door.
4. Press “Start/Pause/Cancel” button.
Starting
1. Press the “On/Off” button.
2. Select the programme and the
temperature.
3. If desired (according to your machine’s
model):
Programme is in rinse hold mode
This process is shown with the flashing
C
–
–
–
select any auxiliary function,
adjust the spin speed,
set the time delay,
spin symbol and the standby symbol
which is lit up.
If you wish to spin when the machine is in
this mode:
1. Adjust the spin speed.
2. Press “Start/Pause/Cancel” button. The
programme continues, pumps out the
water and spins.
3. The standby symbol fades out and the
start symbol lights up.
If you want to discharge the water without
spinning:
1. Press “Start/Pause/Cancel” button.
2. The standby symbol fades out and the
start symbol lights up.
3. The programme continues and only
pumps out the water.
4. Close the loading door.
5. Press “Start/Pause/Cancel” button.
The display shows the time remaining for
the programme to complete if time delay is
not set.
The display shows the time remaining for
the programme to start if the time delay is
set.
6. Check if the Door Locked Symbol lights
up on the screen.
The Door Locked Symbol (Figure 3-13i) will
light up if time delay is not set.
The Door Locked Symbol (Figure 3-13i) will
fade if time delay is set.
Cancelling a programme
Re-spinning the laundry
1. Press and hold the “Start/Pause/
Cancel” button for about 3 seconds; the
Start symbol will start flashing.
The control system for an unbalanced load
can pause the spinning in cases when the
distribution of the laundry in the drum is not
balanced.
2. The machine can discharge all the
water or can take in water for 3 times
at most to cool down the clothes and
complete discharging process.
If you want to re-spin the clothes:
1. Distribute the laundry in your machine
for a balanced load.
2. Select the spin programme.
3. Adjust the spin speed.
Adding more laundry
This is only possible under the following
•
conditions:
After the programme is finished
Programme indicator symbols on the
screen will remain lit after the programme is
finished. “End” will appear on the screen.
1. Open the loading door and take out the
laundry when the door locked symbol
on the display fades out.
–
C
during time delay,
You may add or remove laundry during
the time delay (until the programme
starts). At the beginning of a washing
cycle (machine allows adding more
laundry during a future step only if the
water level is low enough to open the
2. Press the “On/Off” button.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 - EN
3. Turn the water tap off.
4. Remove any folds in the rubber seal on
the loading door and check for debris.
5. Leave the loading door and detergent
drawer open to dry.
Download from Www.Somanuals.com. All Manuals Search And Download.
25 - EN
7
Cleaning and care
cleaning agent. Never use steel wool or
wire wool.
Detergent drawer
Remove any powder residue buildup in the
drawer. To do this;
1. Press the dotted point on the siphon
in the softener compartment and pull
towards you until the compartment is
removed from the machine.
Outer cabinet and control panel
When necessary:
•
Wipe the exterior panels of your
machine with soapy water or mild
detergent. Dry it with a soft cloth.
Use only a soft and damp cloth to clean
the control panel.
•
Never use a sponge or scrubbing
material. These will damage the painted
and plastic parts.
C
Inlet water filters
There is a filter at the end of each water
intake valve at the back side of the machine
and also at the end of each water intake
hose where they are connected to the tap.
These filters prevent the foreign substances
and dirt in the water to enter into the
machine. Filters should be cleaned as they
get dirty.
If more than a normal amount of water
C
and softener mixture starts to gather in
the softener compartment, the siphon
must be cleaned.
2. Wash the dispenser drawer and the
siphon with plenty of lukewarm water
in a washbasin. Wear protective gloves
or use an appropriate brush to avoid
touching the residues in the drawer
when cleaning.
3. Replace the drawer into its housing
after cleaning. Check if the siphon is in
its original location.
The door and the drum
After each wash:
•
Check if there are any foreign
substances in the drum.
Open the hole in the bellow with the aid
of a toothpick if it is clogged.
•
•
•
Close the taps.
Remove the nuts of the water intake
hoses to clean the surfaces of the
filters on the water intake valves with an
appropriate brush.
•
•
If the filters are very dirty, you can pull
them out by means of pliers and clean
them.
Take out the filters on the flat ends of
the water intake hoses together with
the gaskets and clean thoroughly under
streaming water.
Foreign metal substances in your
machine can cause rust stains. In such
cases:
C
Clean the drum with a stainless steel
•
Replace the gaskets and filters carefully
Download from Www.Somanuals.com. All Manuals Search And Download.
26 - EN
and tighten the hose nuts by hand.
Draining any remaining water
and cleaning the pump filter
Filter system in your machine prevents solid
items such as buttons, coins and fabric
fibers clogging the pump propeller during
discharging of the washing water. Thus, a
good water discharge is achieved and the
pump life is extended.
3- An emergency drain hose is supplied
with some of our models. Others are not
supplied with this item.
•
If your machine fails to drain the water,
the pump filter may be clogged. You
may have to clean it every 2 years or
whenever it is blocked plugged. Water
must be drained off to clean the pump
filter.
If your product is supplied with an
emergency drain hose, do the following as
shown in the figure below:
In addition, water may have to be drained
off completely in the following cases:
•
•
before transporting the machine (e.g.
when moving house)
when there is the danger of frost
In order to clean the dirty filter and
discharge the water;
1- Disconnect or unplug the machine from
the power supply.
•
•
Pull out the pump outlet hose from its
housing.
There may be water at 90°C in the
A
machine. Therefore, the filter must be
cleaned only after the inside water
is cooled down to avoid hazard of
scalding.
Place a large container at the end of
the hose. Drain the water off into the
container by pulling out the plug at the
end of the hose. If the amount of water
to be drained off is greater than the
volume of the container, replace the
plug, pour the water out, then resume
the draining process.
After draining process is completed,
replace the plug into the end of the
hose and fit the hose back into its
place.
2- Open the filter cap. The filter cap may be
composed of one or two pieces according
to the model of your machine.
If it is composed of two pieces, press the
tab on the filter cap downwards and pull the
piece out towards yourself.
•
If your product is not supplied with an
emergency drain hose, do the following as
shown in the figure below:
If it is composed of one piece, hold it from
both sides and open it by pulling out.
You can remove the filter cover
C
by slightly pushing the kick plate
downwards with a screwdriver, through
the gap above the filter cover.
•
Place a large container in front of the
Download from Www.Somanuals.com. All Manuals Search And Download.
27 - EN
filter to receive water flowing from the
filter.
•
Loosen pump filter (anticlockwise) until
water starts to flow out of it. Direct the
flowing water into the container you
have placed in front of the filter. You
can use a piece of cloth to absorb any
spilled water.
•
•
•
When there is no water left, turn the
pump filter until it is completely loose
and remove it.
Clean any residues inside the filter
as well as fibers, if any, around the
propeller region.
If your product has a water jet feature,
be sure to fit the filter into its housing
in the pump. Never force the filter while
replacing it into its housing. Fit the filter
fully into its housing; otherwise, water
may leak from the filter cap.
4- Close the filter cap.
Close the two-piece filter cap of your
product by pushing the tab on it.
Close the one-piece filter cap of your
product by fitting the tabs on the bottom
into their positions and pushing the upper
part of it.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 - EN
8
Solution suggestions for problems
Cause
Explanation / Suggestion
Programme cannot be started or selected.
Machine may have switched to self
protection mode due to an infrastructure
problem (such as line voltage, water
pressure, etc.).
Bring your machine to factory settings by turning
the Programme selection knob. (see, Ending the
Programme through Cancelling)
Water in the machine.
There may be some water in your machine
when you receive it. This is from the quality
control process and is normal.
It is not harmful to your machine.
There is water coming from the bottom of the machine.
- Make sure that the seals of the water inlet hoses
are securely fitted.
There might be problems with hoses or the
pump filter.
- Tightly attach the drain hose to the tap.
- Make sure that the pump filter is completely
closed.
Machine does not fill with water
- Tap may be turned off.
- Open the inlet water taps fully.
- Flatten the water intake hose.
- Clean the water intake filter.
- Close the loading door.
- Water inlet hose might be bent.
- Water inlet filter might be clogged.
- The loading door may be ajar.
Machine does not discharge water.
- Water outlet hose might be clogged or
twisted.
- Pump filter may be clogged.
- Clean or flatten the hose.
- Clean the pump filter.
Machine vibrates or shakes.
- Machine feet might not be adjusted.
- Transportation safety bolts might have not
been removed.
- Adjust the machine feet.
- Remove the transportation safety bolts.
- Add more laundry to the machine.
- Reduce the amount of laundry in the machine or
balance the load by hand.
- There may be a small amount of laundry in
the machine.
- The machine may be overloaded or the
clothes may be distributed unevenly.
- There machine might be touching a solid
surface.
- Ensure that nothing touches the machine.
Machine stops shortly after the Programme starts.
Machine can stop temporarily due to low
voltage.
It will resume operating when the voltage is back to
the normal level.
The water being taken in is directly discharged.
Connect the water draining hose as described in
the operation manual.
Improper position of the drain hose.
No water can be seen in the machine during washing.
This is not a problem. The water level is not
visible from the outside of the machine.
Download from Www.Somanuals.com. All Manuals Search And Download.
29 - EN
The door is jammed.
- Water level might be above the lower level
of the door.
- Machine might be heating up the water or - Run either the “Pump” or “Spin” Programme.
it may be at the spinning cycle.
- Wait until the process is over.
- Wait until the process is over.
- Due to an electrical mechanism, the door
can only be opened a few minutes after the
Programme has stopped.
Machine fills with water when a process is cancelled.
For safety reasons cold water is added to cool the
hot wash load
Inside of machine may be hot.
It continuously spins. Remaining time does not count down. (On models with display)
- The automatic spin correction system might have
been activated due to the unbalanced distribution
of the laundry in the drum.
- The laundry in the drum may be clustered
There may be an imbalance of laundry in the
(bundled laundry in a bag). Laundry should be
machine.
rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
Washing time takes longer than the time specified in the manual
- The machine will wait until there is sufficient
amount of water, which will lengthen the washing
time to avoid poor washing results due to
insufficient water.
- Washing time is extended to avoid poor washing
results when the supply voltage is low.
- Cycle time is extended to heat up the water when
- Water pressure may be low.
the input water is cold. Also, washing time can be
- Supply voltage may be low.
lengthened to avoid poor washing results.
- Input temperature of water may be low.
- The automatic spin correction system might have
- There may be an imbalance of laundry in
been activated due to the unbalanced distribution
the machine.
of the laundry in the drum.
- Number of rinses and/or amount of rinse
- The laundry in the drum may be clustered
water might have increased.
(bundled laundry in a bag).
- Laundry should be rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
- Water amount is increased to obtain a better
rinse and a rinse cycle is added when necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 - EN
It continuously washes. Remaining time does not count down.
- The machine will wait until there is sufficient
amount of water to avoid poor washing results due
to lack of water. Then the timer will start to count
down.
- Time will not count down until the selected
temperature for the Programme is attained.
- The automatic spin correction system might have
been activated due to the unbalanced distribution
of the laundry in the drum.
In the case of a paused countdown while
taking in water:
- Timer will not countdown until the machine
is filled with the correct amount of water. (On
models with display)
- Time might have gotten stuck during
heating step. (On models with display)
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
In the case of a paused countdown at the
spinning step:
There may be an imbalance of laundry in the
machine. (On models with display)
It did not spin.
- The automatic spin correction system might have
been activated due to the unbalanced distribution
of the laundry in the drum.
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- There may be an imbalance of laundry in
the machine. Therefore, the Programme
might have been completed without
spinning.
- The machine will not spin if the water has
not completely drained.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
- Check the filter.
- Check the drain hose.
Washing performance is poor: Laundry turns grey
- Use the recommended amount of detergent
- Using insufficient amount of detergent for
a long time,
appropriate for water hardness and the laundry.
- Select the proper temperature for the laundry to
be washed.
- Washing at low temperatures for a long
time,
- If the water hardness is high, using an insufficient
amount of detergent can cause laundry to turn
grey over time.
- It is difficult to eliminate such greyness once it
occurs.
- Using insufficient amount of detergent for
hard waters (soil can stick to the laundry),
- Using excessive amount of detergent
(detergent can stick to the laundry).
Washing performance is poor: Stain could not be removed, not cleaned. Laundry could not be
whitened.
- Use recommended amount of detergent
- Insufficient amount of detergent used.
appropriate for the laundry.
- Excessive laundry loaded into machine
- Do not load the machine in excess.
- Wrong Programme and temperature might
- Select the proper Programme and temperature
have been selected.
for the laundry to be washed.
- Improper detergent may have been used.
- Put the detergent in the correct compartment.
- Wrong type of detergent used.
- Do not mix detergent with bleaching agents.
Download from Www.Somanuals.com. All Manuals Search And Download.
31 - EN
- Washing performance is poor: Oily stains appear on laundry.
- Washing performance is poor: Bad odour
- Such odours and bacteria layers are formed on
the drum as a result of continuous washing at
lower temperatures and/or in short Programmes.
- Oily accumulations on the drum may have - Leave the detergent dispenser drawer as well
stuck to the laundry.
as the loading door of the machine ajar after each
- Oily accumulations on the drum may have washing. Thus, a humid environment favorable for
stuck to the laundry.
bacteria cannot be created inside the machine.
- Machine must be operated empty either at
60°C or 90°C Programme with detergent every 6
months.
Colour of the clothes faded.
- Do not load the machine in excess
- Store detergent in a closed and dry location.
- Do not keep them under high temperatures.
- Select the proper Programme and temperature
according to the type and soiling degree of the
laundry.
- Excessive laundry loaded into machine.
- Detergent may have gotten damp.
- A higher temperature might have been
selected.
It does not rinse well.
- Store detergent in a closed and dry location. Do
not keep them under high temperatures.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
- The amount, brand and storage conditions can take this detergent during rinsing or softener
of the detergent used might not be
appropriate.
step.
- Check the filter.
- Detergent might have been put in the
wrong compartment.
- Check the drain hose.
- There may be an imbalance of laundry in the
machine.
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- Machine filter may be clogged.
- Drain hose may be folded.
- Intermediate spins may be skipped.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
Clothes stiffened.
- If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
step.
- Insufficient amount of detergent used.
- The detergent may have been placed into
the wrong compartment; the detergent may
be mixed with the softener.
- Do not mix the softener with detergent when
putting in the compartment.
- Wash and clean the drawer with hot water.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 - EN
Clothes do not smell like the softener.
- If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
step.
- Insufficient amount of detergent used.
- The detergent was placed into the wrong
compartment; the detergent was mixed with
the softener.
Do not mix the softener with detergent when
putting in the compartment.
Wash and clean the drawer with hot water.
Detergent residue in the dispensing drawer.
- Dry the detergent drawer before putting in
detergent.
- Store detergent in a closed and dry location.
- Do not keep them under high temperatures.
- The detergent dispenser outlet (holes) may have
a problem.
- There might be problems with the detergent
dispenser valves.
- Do not mix the softener with detergent when
putting in the compartment.
- Detergent may have been put in wet
dispenser drawer.
- Detergent may have gotten damp.
- Water pressure might be low
- The detergent in the main wash
compartment might have gotten wet while
taking in the prewash water..
- Detergent might be mixed with the
bleaching agent.
There is detergent left on the laundry.
- Excessive laundry loaded into machine.
- Do not load the machine in excess.
- Wrong Programme and temperature might - Select the proper Programme and temperature
have been selected.
- Wrong detergent may have been used.
for the laundry to be washed.
- Use wool detergents for woollens.
There is too much foam
- Use only automatic washing machine detergents
in your washing machine.
.
- You may not be using proper detergent for - Use only sufficient amount of detergent.
automatic washing machines.
- Use only sufficient amount of detergent.
- Store detergent in a closed and dry location.
- Do not store in excessively hot places.
- Use smaller amounts of detergent for lace items.
- If you put detergent in the prewash
- Excessive amount of detergent may have
been used.
- Too much detergent may have been used
for a small amount of lightly soiled laundry.
- Detergent may have been stored improperly. compartment although you have not selected
- Type of material being washed (lace items
will cause excessive foam due to their
meshed structure).
a prewash cycle, the machine can take this
detergent during rinsing or softener step.
- Too much softener was put in.
- Detergent might have been put in the wrong The detergent dispenser is problematic. Water
compartment.
- Softener being released early.
is siphoned (pulling the softener into the washer
early) during the fill or rinse cycles.
Valves are problematic.
There is foaming over the detergent drawer
Mix 1 tablespoonful softener and ½ liter water
and pour into the main wash compartment of the
detergent drawer.
Too much detergent was used
Download from Www.Somanuals.com. All Manuals Search And Download.
33 - EN
Machine does work. Nothing is displayed on the screen.
The plug might not be plugged in the mains
outlet.
Check the plug.
Fuse may have blown.
Electricity may be cut off.
The “On/Off” button might have not been
pressed.
The machine did not start after the program was selected and the «Start/Pause/Cancel» button was
pressed.
Check the fuse.
Check the supply power.
Press this button.
The front door may be ajar.
The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the model of your
machine, water cut-off symbol may light up too)
You can restart your machine by pressing the «Start/
Water may have been cut off.
Pause/Cancel» button for a short time after ensuring
that the water is not cut off.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 - EN
9
Guarantee
Your new Beko product is guaranteed
against the cost of breakdown repairs for
twelve months from the date of the original
purchase.
is recommended for all Washing
Machines, Dishwashers and Electric
Cookers
Gas Cookers must only be installed by
a CORGI (or BORD GAIS) registered
Gas Installer.
The guarantee is given only within the
boundaries of the United Kingdom and
the Republic of Ireland.
The guarantee is applicable only to new
products and is not transferable if the
product is resold.
•
•
•
What is covered?
•
Repairs necessary as a result of faulty
materials, defective components or
manufacturing defect.
•
•
The cost of functional replacement
parts, but excluding consumable items.
The labour costs of a Beko approved
repairer to carry out the repair.
•
•
Beko disclaims any liability for incidental
or consequential damages.
The guarantee does not in anyway
diminish your statutory or legal rights.
What is not covered?
•
•
•
Transit, delivery or accidental damage
or misuse and abuse.
Cabinet or appearance parts, including
knobs, flaps, handles or container lids.
Accessories or consumable items
including but not limited to, ice trays,
scrapers, cutlery baskets, filters and
light bulbs.
Repairs required as a result of
unauthorised repair or inexpert
installation that fails to meet the
requirements contained in the user
instruction book.
Should you experience any difficulty in
obtaining service please contact the Beko
Customer Help-Line.
Tel: 0845 600 4911
e-mail:[email protected]
•
•
•
Repairs to products used on
commercial or non-residential
household premises.
Loss of frozen food in freezers or fridge/
freezers. (Food loss insurance is often
included within your household contents
insurance policy, or may be available
separately from your retailer).
Important notes.
•
Your Beko product is designed and built
for domestic household use only.
The guarantee will be void if the product
is installed or used in commercial or
non-residential domestic household
premises.
•
•
•
The product must be correctly installed,
located and operated in accordance
with the instructions contained in the
User Instructions Booklet provided.
Professional installation by a qualified
Electrical Domestic Appliance Installer
Download from Www.Somanuals.com. All Manuals Search And Download.
35 - EN
10 Service
Please keep your purchase receipt or other
proof of purchase in a safe place; you will
need to have it should the product require
attention under guarantee.
Should you experience any difficulty in
obtaining service please contact the Beko
Customer Help-Line.
Tel: 0845 600 4911
e-mail:[email protected]
You should also complete the details below;
it will help us assist you when requesting
service. (The model number is printed
on the Instruction Booklet and the serial
number is printed on the Rating Label
affixed to the appliance)
Model No:
Serial No:
Retailer:
Date of purchase:
For service under guarantee simply
telephone the appropriate number below
UK Mainland & Northern Ireland
Fridges & Freezers
Electric Cookers
Gas &
0845 600 4903
0845 600 4902
0845 600 4905
Dual Fuel Cookers
Washing Machines &
Dishwashers
0845 600 4906
Republic of Ireland
All Refrigeration, 01 862 3411
All Cookers
Washing Machines & Dishwashers
Before requesting service please check the
trouble-shooting guide in the Operating
Instructions as a charge may be levied
where no fault is found even though your
product may still be under guarantee.
Service once the manufacturers
guarantee has expired.
If you have purchased an extended
guarantee please refer to the instructions
contained within the extended guarantee
agreement document. Otherwise please
call the appropriate number above where
service can be obtained at a charge.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 - EN
Download from Www.Somanuals.com. All Manuals Search And Download.
37 - EN
Download from Www.Somanuals.com. All Manuals Search And Download.
38 - EN
Download from Www.Somanuals.com. All Manuals Search And Download.
39 - EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|