19462 Powder Hill Place
Poulsbo, WA 98370
800.762.5757
360.779.7901
CP755ew
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Digital Multimedia Projector
About User’s manual
Thank you for purchasing the LCD projector.
Please read this user’s manual thoroughly to
ensure correct usage of the projector and its
features.
After reading, store this instruction manual in
a safe place for future reference.
Features
1. Design with 3LCD optical system, provide you:
Bright image, natural color, smooth video
playback and gentle for your eyes.
2. Dynamic Contrast and 3D Comb Filter
3. Auto V keystone function, +/- 30 degrees.
4. Auto brightness control.
5. Auto ceiling function.
6. Support YPbPr signal.
The content of this manual is subject to change without period notice.
All rights reserved.
-1-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Table of Contents
Safety Instructions………………………………………………………
04
Checking the Package Content….…………...………………………
10
Before Use
Names and Function of Each Part
Main Unit.................................................………………………..
Keypad Control ...............……......................……………………
Rear View I/O Board ..............................……………..…………
Bottom View........................................………………….….........
Remote Control….....................................………………………
Inserting the batteries ............ ...........................……………….
11
13
15
17
18
19
Installation
Setting up the projector……………………………………….……
Screen size and projection distance………………………………
Adjusting the image position..………….…………………………
Moving the projector………………………………………..………
20
22
23
24
How to connect
Desktop PC.............................……….......………………………
Laptop PC.....................................………………………... …….
USB Mouse............................……...……………………............
Video.......................................……………………………..........
25
26
27
28
-2-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Basic Operation
Turning on the projector………………………………..……………
29
Adjusting the screen image……………….………………………
Turning off the power…………….………………………...………
31
32
Function of Menu
Keypad operating…………………………………..………………
Computer mode……………………………………..……….………
Video mode………………….……………………..……………….
33
34
40
Maintenance and
Ceiling Mounted Installation Guide…………………………….…
Cleaning the Projector/Lens……...………………….……………
Cleaning air filter…………………………………….…..…………
Lamp replacement………….……………………………….………
46
47
47
48
Indicators………………………………………….….………………
49
List of Support Displays Modes………………………………..
51
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
About the symbols
Various symbols are used in this instruction manual and on the
product itself to ensure correct usage, to prevent danger to the
users and others, and to prevent property damage.
The meanings of these symbols are described below. It is
important that you read these descriptions thoroughly and fully
understand the contents.
Warning
This symbol indicates information that, if ignored,
could possibly result in personal injury or even
death.
Caution
This symbol indicates information that, if ignored,
could result in personal injury or physical damage.
This symbol indicates an additional warning (including
cautions). An illustration is provided to clarify the contents (for
example: the illustration to the left indicates danger of electrical
shock).
This symbol indicates a prohibited action. The contents
will be clearly indicated in an illustration or description near the
symbol (for example: the symbol to the left indicates that
disassembly is
This symbol indicates a compulsory action.
The contents will be clearly indicated in an illustration or
description near the symbol (for example: the symbol to the left
shows that the power plug should be disconnected from the
power outlet).
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Warning
If a problem should occur
ꢀIf smoke or strange odors arise, continued use could result in fire or
electrical shock. In such case, immediately turn off the power
switch and then disconnect the power plug from the power outlet.
After making sure that the smoke or odor has stopped, contact your
dealer for repairs. Never attempt to make repairs yourself because
this is dangerous.
ꢀDo not use this projector if there is no image or sound, or if the
sound is distorted. Continued use could result in fire or electrical
shock. In such case, immediately turn off the power switch;
disconnect the power plug from the power outlet and contact your
dealer.
ꢀIf water should enter the inside of this projector, immediately turn
off the power switch, disconnect the power plug from the power
outlet and contact your dealer.
Do not install on an unstable surface. Do not install this projector
on an unstable surface such as a wobbly stand or incline because
this could result in the projector falling and causing injury.
Do not open the cabinet. Never open the cabinet. There is high
voltage inside which can cause electrical shock. Contact your dealer
for internal inspection, adjustment and repair.
Do not modify. Do not modify this projector because this could
result in fire or electrical shock.
Do not use in the bathroom. Do not use this projector in the
bathroom because this could result in fire or electrical shock.
Do not insert objects into the project.
ꢀDo not insert metal objects through the ventilation openings, etc.,
of this projector or drop such objects inside because this could
result in fire or electrical shock.
ꢀIf a foreign object should enter this projector, immediately
turn off the power switch, disconnect the power plug from the
power outlet and contact your dealer.
ꢀContinued use could result in fire or electrical shock. Use special
caution in households where children are present.
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Warning
Do not look through the lens when the lamp is on. Never look
through t he lens when the lamp is on. The powerful light could
adversely affect vision. Use special caution in households where
children are present.
Avoid shock or impact on the projector.
ꢀIf the projector should fall, resulting in damage to the cabinet,
immediately turn off the power switch, disconnect the power plug
from the power outlet and contact your dealer.
ꢀContinued use could result in fire or electrical shock.
Do not place this projector in a container containing liquid.
Do not place flower vases, flowerpots, cups, cosmetics,
liquids such as water, etc., on top of this projector.
Do not use any power cable except those supplied with the
projector. The use of any other power cable could result in fire
or electrical shock.
Do not shine the laser beam onto yourself or other.
ꢀThe laser pointer function of projector remote control emits class
Ⅱlaser beam.
ꢀDo not look directly into the laser beam outlet or direct the laser
beam at other people. Vision can be impaired if the laser beam
enters the eyes. Especially pay attention if children are present.
High temperatures are generated when the lamp is lit; so do
not place objects in front of the lens.
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Caution
of balance or falling and cause personal injury or damage the
projector.
Do not block the ventilation openings.
Do not block the ventilation openings of this projector.
Blocking ventilation could lead to internal overheating which
could result in fire.
ꢀDo not place this projector on its side during use or push it into
a small, poorly ventilated location.
ꢀDo not place this projector on a carpet or bedding or cover it
with a tablecloth, etc. Also, when installing this projector, make
sure the ventilation openings are at least 30cm(12in)
clearance around the projector.
Care and maintenance. For safety purposes, disconnect the
power plug from the power outlet before starting the care and
maintenance of this projector.
Battery usage.
ꢀReplace the batteries with the same type only. Do not mix old
and new batteries; this could result in fire or personal injury due to
battery cracking or leakage.
ꢀMake sure the plus and minus terminal s are correctly
aligned when loading the batteries.
ꢀIncorrect loading could result in personal injury or contamination
of the surroundings due to battery cracking or leakage.
Have the projector interior cleaned regularly.
Contact your dealer to arrange for the service.
Accumulations of dust inside the projector can result in fire or
malfunction if not cleaned for an extended period.
Ask your dealer for details about internal cleaning.
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Caution
Avoid installation in humid or dusty locations.
Do not install this projector in a humid or dusty location.
This could result in fire or electrical s hock.
Do not handle the power cord roughly.
Keep the power cord away from heaters; the heat could melt
the power cord and cause fire or electrical shock.
Do not touch the power plug with wet hands; this could result
in electrical shock.
When disconnecting the power plug, do not pull on the
power cord. This could damage the power cord and cause fire
or electrical shock. Always grip the plug when disconnecting.
When the projector is not to be used for an extended
period. If the projector is not to be used for an extended period
because of travel, etc., disconnect the power plug from the
power outlet and replace lens cover.
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Checking the Package Contents
□Projector
□Remote Control
□Power Cord
( included battery)
□Computer cable
□USB Cable
□S-Video
□Video Cable
□Audio Cable
□Speaker Cable
□Quick Start Guide
□RS232 (Optional)
□Carrying Bag
(included CD)
(Optional)
□Filter Sponge
□Convergence Lens
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Part Names and Function:
Main Unit
8.Control panel
Outlet ventilation
Speaker
4.Filter cover( bottom)
1.Zoom ring
2.Focus ring
6.Foot adjust button
7.Lens cover
3.Front IR receiver
5.Front adjustable foot
1. Zoom Ring
Use the Zoom Ring to adjust the size of the projected image.
Rotate the Zoom Ring until the image is the desired size.
2. Focus Ring
Use the Focus Ring to focus the projector image.
Rotate the Focus Ring until the image is clear.
3. Front IR receiver
When using the remote control, point the remote control at this sensor.
4. Filter cover
Prevents dust and other foreign particles from being drawn into projector.
Remove the Filter cover to clean the air filter.
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
5.Front adjustable foot
Extend and retract to adjust the projection angle
6.Foot adjust button
Lock/unlock the adjustable foot.
7.Lens cover
Attach when not using to protect the lens from becoming dirty or damaged.
8.Control panel (key pads)
Operating system.
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Keypad control
8. Power indicator
9. Lamp indicator
1. Power
6. Menu-left/ right,
Menu-up/down
7. Keystone
5. Menu
3. Blank
4.Auto
2. Input
1.Power button
Power on / operation mode, Standby mode, Cooling-down mode
Brightness function,when sensor detects the surrounding light
lower than 150 lux,”power button”will flash blue.
2. INPUT Computer source
Selects between RGB input source-
Computer 1 → Computer 2(RGB or YPbPr) → AV → S-Video → Computer1
System will auto detect YPbPr or RGB signal in computer 2 port.
-13-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
3. Blank
Blanks the projected image. If the projector is left in blank mode for more
than 15 minutes, the projector will automatically shut down.
4. Auto
Automatically adjusts the setting to match the current input.
5. Menu
Display or hides the OSD main menu
6.Menu-up /down, Menu-right / left
Selecting OSD menu item up or down.
Selecting and adjusting the function of OSD menu item
7. Keystone
Adjusts the vertical keystone with menu-right,
8.Power indicator
Lights on or flashes to indicate the operating status of the projector (See Page 49)
9. Lamp indicator
Indicate a problem in the internal projector temperature, lamp cover or
cooling down. (See Page 50)
-14-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Rear View / IO Board
12.Rear IR receiver
Inlet ventilation
11.Power switch 10.Power socket
1.Computer1 in
3.Monitor out 5.S-video
9.USB mouse connector
4.RS-232C
7.Audio out
8.Audio in
1.Computer2/YPbPr in 6.Video in
1. Computer in 1
Input Analog RGB video signal from a computer
2. Computer in 2 /YPbPr
When input signal from computer 2, it may encounter incorrect picture
color. Please press "Auto" button again. The picture will be corrected.
3. Monitor out connector
Connect an external monitor to this connection view the Computer1
input.
4. Control (RS-232C)
Serial data port for controlling the projector with a computer or other RS-232
control device.
-15-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
5. S-Video connector
S-Video signal from a video source.
6. Video in
Component video signal from a video source.
7. Audio out
Connecting to an external speaker system.
8. Audio in
Stereo mini jack for PC input
9. USB mouse connector
Connects a USB mouse cable to a computer to control computer mouse functions.
10. Power socket
Connects the power core to this connection.
11. Power switch
Turns the power on/off.
12. Rear IR receiver
When using the remote control, point the remote control at this sensor.
-16-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Bottom View
1. Suspension bracket fixing points(4) M4-8 Screw
2.Air filter cover
1. Suspension bracket fixing points(4)
1. Suspension bracket fixing points (4 points)
Install the optional ceiling mount here when suspending the projecto
from the ceiling.
2. Air filter cover
Prevents dust and other foreign particles from being drawn into the
projector.
-17-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Remote Control
1.Power
2.Laser pointer
Use laser pointer from
remote control.
Power on / operation
mode, Stand by mode,
Cooling-down mode
3.Mouse Left
Mouse left
multipurpose key.
4.Mouse Right
Mouse right
multipurpose key.
5.Menu
Display or hides the
OSD main menu page.
6.Menu-up / Menu-down
Selects OSD menu item
up or down
8.Keystone up /down
Adjusts the horizontal
Key stone function
7.Menu-right / Menu-left
Selecting and adjusting
the function of OSD
menu item
10.Input
Selects between RGB
input source-computer1,
computer2
9.Volume up / down
Sound louder or lower
15.Mute
11.ESC
Mute audio
Press ”ESC” button, it
will close ”Menu” picture
16.Zoom in / Zoom out
Zoom in or zoom out
12.Auto Sync
Refresh the current
17. Point button
Select an item or
adjusts value in the
On-Screen Menu.
image.
14.Still
Keep the current
image
on the screen.
13.Blank
Hide the current
image, Become
black color on the
screen
-18-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Inserting the batteries
Loading AAA batteries into the remote control.
1. Remove the battery cover.
Push the knob while lifting up the battery cover.
2. Loading the batteries.
Make sure the plus and minus poles are correctly oriented.
3. Close the battery cover.
Caution
ꢀ
ꢀ
Avoid excessive heat and humidity.
Do not drop the remote control.
ꢀ
Do not expose the remote control to water or moisture, this could result
in malfunction.
ꢀWhen the remote control will not be used for an extended period,
remove the batteries.
ꢀ
Replace the batteries when remote control becomes sluggish or
unresponsive.
ꢀ
ꢀ
Do not place the remote control close to the cooling fan of the projector.
Do not disassemble the remote control .if the remote control needs
service. Please bring it to the service station.
Warning
The laser pointer function emits a class
Ⅱ
laser beam. Do not look
directly into the laser beam outlet or point the laser beam at other people.
Vision can be impaired by shining the beam in to the eyes.
-19-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Installation
Setting Up the Projector
The projector supports the following four different projection methods
ꢁ Front projection
ꢁ Rear
ꢂ
A special method of installation is required in order to suspend the
projector from the ceiling. Please ask your dealer for details.
-20-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
ꢁ
Rear ceiling projection
ꢁ
Front ceiling
projection
ꢂ
A special method of installation is required in order to suspend the
projector from the ceiling. Please ask your dealer for details.
-21-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Screen Size and Projection Distance
The distance between the projector and screen determines the actual image
size. Refer to the table below to determine the image size at a given distance.
Screen
(inch)
Distance (m)
Tele
0.96
1.45
1.95
2.44
3.68
4.92
7.4
Wide
40
60
80
100
150
200
300
0.78
1.19
1.6
2.02
3.05
4.08
6.15
-22-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Adjusting the Image Position
Use the adjustable foot at the front of the projector to set the image height.
Rotate the adjustable foot at the rear of the projector to fine-tune the image
position.
ꢀ
When the foot is adjusted, it may cause the shape of the projected
image to become distorted. Use the keystone correction function
to correct this distortion.
ꢀ
To retract the front adjustable foot, press the foot release button.
The front adjustable foot will slowly retract inside the projector.
-23-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Moving the projector ( optional)
1. Use the carrying handle when moving the projector.(option)
2. Replace the lens cover and retract the front adjustable foot when
moving the projector to prevent damage to the projector.
Caution
ꢀ
The optional carry bag is intended to protect the projector from
dust and scratches on the surface of the cabinet. It is not
designed to protect the projector from external shock.
Do not transport the projector in an unsuitable transport case
when using a courier or transport service. This may cause
damage to the projector.
ꢀ
Carrying bag
(Optional, please contact your for more information)
-24-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
How to Connect
Before starting, make sure that the projector and computers are both
turned off.
1. Connect the computer cable.
1.1 Connect either end of the computer cable to the projector’s
computer 1/ computer port.
1.2 Disconnect the monitor cable from the computer and connect the
other end of the terminal where the monitor cable is disconnected
from the computer.
1.3 If needed, connect the monitor cable of the computer monitor to
the projector’s Computer out.
1.4 Tighten the screw on all connectors.
.Connect the audio cable if necessary.
2.1 Connect one end of the audio cable to the Audio in jack on
the projector.
2.2 Connect the other end of the audio cable to the audio output
port on the computer sound card.
-25-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Laptop PC
A PC laptop computer
Before beginning, make sure that the projector and computers are both turned
off.
1. Connect the computer cable.
1.1 Connect either end of the computer cable to the projector’s computer
1or computer 2 port.
1.2 Connect the other end of the project cable to the monitor out
connection on the laptop.
1.3 Tighten the all connectors.
2. Connect the audio cable if necessary.
2.1 Connect one end of the audio cable to the Audio in
jack on the projector.
2.2 Connect the other end of the audio cable to the
audio output port on the laptop PC.
-26-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
USB Mouse_
USB mouse compatible MS-Window98/2000/NT/XP/Me,
Macintosh :OS8.6~10.1, and a Microsoft Mouse driver installed.
1. Insert the end of the USB Cable (B-Type) to the projector’s USB port.
2. Connect the end of the USB Cable (A-type) to the computer’s USB port.
3. When the projector and computer are turned on, the appropriate
drivers should load automatically.
-27-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Video
A.Connect to a video source
The Projector can receive composite AV ,YPbPr and S-Video.
1. Connect RCA plug at projector and video source ( like DVD player) for
video signal.
2 . Connect RCA plug ( white and red) to audio source ( like DVD player)
and connect the phone jack to projector for audio signal.
3 . Connect YPbPr plug at projector computer in2 port and video source
( like DVD player) for video signal.
4 . For S-Video, using S-Video cable connect to projector and video
source for video signal.
-28-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Basic Operation
Turning on the projector
Procedure
1. Check the power is turned off for the projector and all components
connected to the projector.
2. Remove the lens cover.
3. Connect the power cord to the projector.
4. Turn on the power switch.
5. Press the
button on the control panel or [POWER] button on
the remote control.
Power
5.
Mouse
L
R
1.
3.
4.
2.
-29-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
6. The power indicator will flash green.
7. Press the [VIDEO]/[PC] button on the control panel or the
Computer/Video buttons on the remote control to select the
appropriate source.
6.
Power
Mouse
L
R
7.
8. Use the zoom ring to adjust the screen size.
9. Use the focus ring to adjust the focus.
-30-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Adjust the Screen Image
1. Adjusting the image size
Turn the zoom ring on the projector to adjustor to adjust the image
2.Adjusting the image height.
Extend or retract the front adjustable foot to adjust the height of the image.
3.Correcting Keystone Distortion
Use the [
Keystone] button on the projector's control panel.
*Correcting vertical keystone distortion
-31-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Turning off the projector
1. Press the power button on the projector or r emote control. The power off
confirmation message appears .I f you do not wan t to power off the
projector, ignore the message and it will disappear.
2. Press the power button again and the projector will enter cool-down
mode. The lamp shuts off, the lamp indicator flashes red, and the fans
continue to run for approximately two minutes. During the cool down
sequence the projector will not respond to any control panel or remote
control buttons.
Caution: Do not set the power switch to off or unplug the projector during the
cool-down sequence. Not allowing the lamp to cool properly will greatly reduce the
life of the lamp.
3. After the cool-down sequence is complete the fans will shut off and the
lamp indicator will stop flashing. The projector is now in standby mode
and can be turned back on with the remote control or control panel. If the
projector will not be used for an extended period, set the power switch to
off and disconnect the power cord.
-32-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Functions of Menu (OSD)
Keypad Operating:
1. Power
6. Menu-left/ right,
Menu-up/down
7. Keystone
5. Menu
4.Auto
5
2. Blank
3. Input
1.
: Turn on and turn off the projector
2. BLANK: Blanks the projected image. If the projector is left in Blank
mode for more than 15 minutes, the projector will automatically shut
off the lamp and enter cool-down mode.
3. AUTO: Automatically adjusts the settings to match the current input.
4. SOURCE: Selects VIDEO or PC input source.
5. MENU: Enter or exit the main menu (Show and hide the OSD)
6.
: Up / Down arrow buttons, used to navigate through the OSD
Menus.
: Right / Left arrow buttons, used to select and adjust OSD Menu
functions.
7. Keystone: Adjusts the vertical keystone with the right and left
arrow buttons.
**There is a “Quick Key“ on the remote control and projector keypad as well.
**Press the “Volume” button on remote control, you can adjust value, and
select between Brightness – Contrast – Keystones – Volume directly.
There is the same function for pressing the
button on the keypad
-33-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Computer mode
1. PICTURE
Brightness
Contrast
000/100
000/100
000/006
Adjusts the overall image brightness
Adjusts the difference between light and
dark areas of the image
sharpness
Adjusts the image sharpness
Display mode
Select
Powerful
Video
Presentation
Natural
Enhance brightness
Keep the soft tender color
For computer presentation use
Nature color
Enhance contrast mode for Cinema mode
adjustments of each RGB color
Cinema
User
User Red
User Green
User Blue
000/100
000/100
000/100
-34-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
2. AUDIO
Adjusts the volume
Mutes the volume on/off
Volume
Mute
000/040
On/Off
-35-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
3.SETTING
H position
V position
Phase
000/100
000/100
000/100
000/100
Move the image position horizontally
Move the image position vertically
Set the synchronization polarity
Set the horizontal scanning frequency
Automatically Corrects keystone distortion
in image i.e. press once to do once
Corrects vertical keystone distortion in
image
Frequency
Auto keystone
Keystone V
Execute
-80/+80
Sets all of the above settings
automatically
Search signal source automatically.
Auto sync
Execute
On/off
Auto search
-36-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
-37-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
4.ADVANCE
Zoom/pan
Still
Execute
On/Off
Execute digital zoom and pan function
Freezes the current image on the screen.
Hide the image, displays a blank, black
screen*(see below)
Blank
On/Off
Resets all OSD Menu function to their
factory default values*( see below)
Select the language that the OSD Menu
and on screen massage are display in
English / Chinese(s) / Chinese(t) / Italian
/ Spanish / French / German / Korean /
Polish
Reset all
Execute
Language
English
Select the input source from:
Select source
Computer 1 / Computer 2 (RGB or
YPbPr) / Video / S-video
ꢃBlank on
If the projector is left in Blank mode for more than 15 minutes, the
projector will automatically shut off the lamp and enter cool-down
mode.
ꢃReset all
1. After you select [reset all] on the OSD menu, the following
confirmation message will appear on the screen.
2. Press reset button on the remote control or the button on the
keypad to reset the OSD Menu values. Press the ESC button or
ignore the message to exit the Reset All function without
changing any settings.
-38-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
5.PRESENTATION
Automatically inverts the image when the
projector is turned upside down i.e. when
the projector is mounted on the ceiling
Normal projection mode
Inverts the image vertically, used when
the projector is mounted upside down
Inverts the image horizontally, used
when projecting onto a rear projection
screen
On/off
Auto ceiling
Execute
Execute
Front
Ceiling
Execute
Execute
Rear
Inverts the image horizontally and
vertically, used when the projector is
mounted upside down and projecting
Ceiling and
Rear
onto a rear projection screen
Auto detects brightness; it turns to
economic mode automatically when the
brightness is low.
Normal
Economic
Auto Brightness
Economic mode reduces the lamp
brightness economic to extend lamp life
and quiet the projector
Normal
Economic
Lamp mode
Lamp timer
Show Lamp timer
-39-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Video Mode_
1. PICTURE
000/100
000/100
Brightness
Contrast
Adjusts the overall image brightness
Adjusts the difference between light and
dark areas of the image
Adjusts the image sharpness
Adjusts the image color
Adjusts the image tint
000/006
000/100
000/100
sharpness
Color
Tint
Adjusts the color temperature of the
image
Display mode
Enhance brightness
Powerful
Video
Presentation
Natural
Keep the soft tender color
For computer presentation use
Nature color
Cinema
User
Enhance contrast mode for Cinema
mode adjustments of each RGB color
000/100
User Red
User Green 000/100
User Blue
000/100
-40-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
2. AUDIO
Adjusts the volume
Mutes the volume on/off
Volume
Mute
000/040
On/Off
-41-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
3.SETTING
Automatically Corrects keystone distortion
in image i.e. press once to do once
Corrects vertical keystone distortion in
image
Auto keystone
Execute
Keystone V
Auto search
-80/+80
On/off
Search signal source automatically.
-42-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
-43-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
4.ADVANCE
Zoom/pan
Still
Execute
On/Off
Execute digital zoom and pan function
Freezes the current image on the screen.
Hide the image, displays a blank, black
screen*(see below)
Blank
On/Off
Resets all OSD Menu function to their
factory default values*( see below)
Select the language that the OSD Menu
and on screen massage are display in
English / Chinese(s) / Chinese(t) / Italian
/ Spanish / French / German / Korean /
Polish
Reset all
Execute
Language
English
Select the input source from:
Select source
Computer 1 / Computer 2 (RGB or
YPbPr) / Video / S-video
ꢃBlank on
If the projector is left in Blank mode for more than 15 minutes, the
projector
ꢃReset all
1. After you select [reset all] on the OSD menu, the following
confirmation message will appear on the screen.
2. Press reset button on the remote control or the
keypad to reset the OSD Menu values. Press the ESC button or
ignore the message to exit the Reset All function without changing
any settings.
button on the
-44-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
5.PRESENTATION
Automatically inverts the image when the
projector is turned upside down i.e. when
the projector is mounted on the ceiling
Normal projection mode
Inverts the image vertically, used when
the projector is mounted upside down
Inverts the image horizontally, used
when projecting onto a rear projection
screen
On/off
Auto ceiling
Execute
Execute
Front
Ceiling
Execute
Execute
Rear
Inverts the image horizontally and
vertically, used when the projector is
mounted upside down and projecting
Ceiling and
Rear
onto a rear projection screen
Auto detects brightness; it turns to
economic mode automatically when the
brightness is low.
Normal
Economic
Auto Brightness
Economic mode reduces the lamp
brightness economic to extend lamp life
and quiet the projector
Normal
Economic
Lamp mode
Lamp timer
Show Lamp timer
-45-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Ceiling Mounted Installation Guide
Attach the optional ceiling mount at four-suspension bracket fixing points when
suspending the from a ceiling.
*A special method of installation is required in order to suspend the projector
from the ceiling. Please ask your dealer for more details.
-46-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Maintenance and Troubleshooting
Cleaning the projector
Warning: Always unplug the projector before performing any maintenance.
Clean the projector case by wiping it gently with a soft cloth.
If necessary, the case can be cleaned using a neutral detergent and a soft cloth
ensure the case is completely dry before turning the projector back on.
Cleaning the lens
Use a commercially available air blower, or use lens clean in g paper and lens
cleaner approved for use on optical coatings.
Do not clean the lens with harsh materials or subject the lens to shock, as it
can easily become damaged. Close the lens cover when the projector not in
use.
Cleaning the Air Filter
A. When the air filter becomes clogged with dust, etc., the projector may
overheat and turn itself off to prevent internal damage.
B. Clean the air filter every 100-hours.
*If the filter is difficult to clean or if it is deteriorating, it should be replaced
1.Remove the filter cover from the bottom of projector.
2.Pull out the air filter.
3.Install the new air filter.
-47-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Lamp Replacement
Caution: The lamp and inside of the projector become very hot while
the projection lamp is lit. Allow the projector to cool for at least 15 minutes
prior to opening the lamp door.
1. Release the Lamp Door Latch using a small screwdriver or similar tool
to slide the latch towards the projector lens.
2. Remove the Lamp Door.
3. Remove the two Phillips head screws that hold the lamp in place.
4. Grasp the handle on the top of the lamp and pull the lamp straight up
out of the projector.
Warning: Do not touch the bulb. Touching the bulb will greatly
decrease the life of the lamp and could cause the bulb to explode.
5. Slide the replacement lamp into place and press firmly to seat the lamp.
6. Reinstall the screws removed in step 3.
7. Reinstall the lamp door and press on the side closest to the lens until the
latch snaps into place and the lamp door is flush with the top of the
projector.
-48-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Indicators
The Power and Lamp indicators show the status of the projector. Before
requesting repair, check the projector status using the chart below. If the
problem cannot be resolved contact your dealer.
Power
(Green)
Lamp
(Red)
Condition
Notes
Slow
flashing
Off
Stand by
mode
*Projector is ready to be turned on (normal)
*Projector is on and operating normally
On
On
Off
On mode
Slow
flashing
Cool-down
mode
*Projector is in cool-down mode and will not
respond to user input (normal)
Fast
flashing
* The projector has detected a problem with an
internal fan, the lamp will shut off automatically,
contact your dealer
On
Fan-fault
mode
*The lamp cover is open or there is a problem
Lamp-cover with the lamp. If the lamp door is closed and
Fast
flashing
On
open
replacing the lamp does not correct the issue,
contact your dealer.
*The projector has overheated and shut the
lamp off. Correct the over temp condition
immediately.
1. Check that the ventilation slots are free from
obstructions
Fast
flashing
Fast
flashing
High
temperature
2. Check the cleanliness of the air filter.
3. If the condition persists, contact your dealer
-49-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
Remedy
Symptom
Possible cause
*The main power switch is not
turned on.
*The power cord is disconnected. power outlet
*Turn on the main power switch.
*Plug the power cord into an AC
The power is
not turned on
*The input is not correctly
connected.
*No signal input
*No open lens cover
*The projector is not correctly
connected.
*The volume is set to minimum.
*Mute is turned on
*Select the appropriate input
source
No video
No audio
*Connect correctly
*Remove the lens cover
*Check audio cable connect
correctly.
*Adjust the volume.
*Press the MUTE button
*Check battery of remote
controller
No remote
function
*No battery
*Remote signal be obstructed
*Remove obstacle between
projector and remote controller
*Color density and color
matching are not correctly
adjusted.
Colors are
pale
*Adjust the RGB setting.
*Check VGA cable.
*Color lose
*Brightness and contrast are not
correctly adjusted.
*The lamp is nearing the end of
its service life
Abnormal
brightness &
contrast
*Adjust the brightness and
contrast setting.
*Replace with a new lamp
Video is
blurred
*Focus or RGB phase is out of
adjustment.
*Adjust the focus and phase.
-50-
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia LCD Projector
List of Supported Monitor Displays
Computer mode
Signal
Refresh Rate(Hz)
60
Resolution(dots)
640X480
VGA
VESA
60/72/75/85
56/60/72/75/85
60/70/75/85
70/75
640X480
SVGA
800X600
XGA
1024X768
1152X864
1280X960
1280X1024
SXGA
SXGA
60/75
SXGA
60
Component(YPbPr)
Signal
Refresh Rate(Hz)
Resolution(dots)
720X480
SDTV(480i)
SDTV(480p)
HDTV(720p)
HDTV(1080i)
Composite/S-video
Signal
30
60
60
30
720X480
1280X720
1920x1080
Refresh Rate(Hz)
Resolution(dots)
720X480
TV(NTSC)
TV(PAL,SECAM)
60
50
720X576
-51-
Download from Www.Somanuals.com. All Manuals Search And Download.
|