00CP317/327WBasic 03.5.27 3:04 PM ページ 2
BOXLIGHT
Liquid Crystal Projector
CP-322i
ENGLISH
USER'S MANUAL Vol.1 Basic
Please read this user's manual thoroughly to ensure correct usage through understanding.
R E S E T
E N O T S Y E K
P O W E R
T E N P
L A N P
U T
I N P
N
/ O Y B D N A T S
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 2
This liquid crystal projector is used to project
PROJECTOR
FEATURES
various computer signals as well as NTSC / PAL /
SECAM video signals onto a screen. Little space
is required for installation and large images can
easily be realized.
Ultra High Brightness
Keystone Distortion Correction
G
G
Crisp, ultra-bright presentations is achieved
by using a UHB (ultra high brightness) lamp
and a highly efficient optical system
Quick correction of distorted images electrically
Partial Magnification Function
Whisper Mode Equipped
G
G
Interesting parts of images can be magnified
for closer viewing
Special mode is available for reducing
projector noise to achieve quieter operation
Your projector should come with the items
shown below. Check to make sure that all the
items are included. Contact your dealer if
anything is missing.
PREPARATIONS
NOTE • Keep the original packing material for future reshipment.
R E S E T
E N O T S Y E K
P O W E R
T
U
I N P
T E N P
N O
/
Y B D N A T S
P
N
L
A
Power cord
(UK Type)
Power cord
(Europe Type)
Power cord
(US Type)
Projector
(with Lens Cap)
Liquid Crystal Projector
CP-S317/CP-X327
(CP-S317W/CP-X327W)
USER'S MANUAL Vol.1 Basic
Please read this user's manual thoroughly to ensure correct usage through understanding.
BEDIENUNGSANLEITUNG Teil
1
Grundlagen
Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.
MANUEL D'UTILISATION Vol.1 Fondements
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.
MANUALE D'ISTRUZIONI Vol.1 Informazioni di base
Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere quanto riportato
ai fini di un corretto utilizzo del proiettore.
MANUAL DE USUARIO Vol.1 Básico
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.
GEBRUIKSAANWIJZING Vol.1 Basis
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van de
uitgebreide mogelijkheden.
BRUKERHÅNDBOK Vol.1 Grunnleggende
være garantert driftssikker bruk.
Vennligst les denne bruksanvisningen grundig for
å
NSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico
Para assegurar uso correto do equipamento, por favor leia atentamente este manual do utilizador.
o
RGB cable
Video/Audio cable
USB mouse
cable
R
E
W
O
P
T
E
S
E
R
E
N
O
T
S
Y
E
K
T
U
P
N
N
O
P
N
A
L
N
E
Y
B
D
N
User's Manual
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
PAGE DOWN
MUTE
OFF
FREEZE
KEYSTONE
POSITION
MENU
Two AA batteries
(for the remote
control)
ENTER
ESC
RESET
Remote control
Soft carrying case
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 3
WARNING Precautions to observe in regards to the power cord: Please use extra
caution when connecting the projector's power cord as incorrect or faulty
connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the
following safety guidelines to insure safe operation of the projector:
•
Only plug the power cord into outlets rated for use with the power cord's specified voltage range.
• Only use the power cord that came with the projector.
• NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREE-
PRONGED PLUG!
• Make sure that you firmly connect the power cord to the projector and wall outlet.
Connect your devices to the projector
Connect your computer, VCR and/or other
devices you will be using to the projector.
8
～
12
1
Insert the batteries into the remote
control
13
2
3
Connect the power cord
(1) Connect the connector of the electrical power cord to the AC inlet of the main unit.
(2) Firmly plug the power cord's plug into the outlet
Power outlet
(1)
(2)
AC inlet
Power cord
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 4
THE PROJECTOR
PART NAMES
Indicates the corresponding
reference page
RESET button
MENU button
24
23
POWER indicator
KEYSTONE button
14
20
TEMP indicator
27
INPUT button
15
LAMP indicator
26
STANDBY/ON button
14
R E S E T
E N O T S Y E K
T U
P O W E R
I N P
N
T E N P
/ O Y B D N A T S
P
N
L A
Zoom ring
Focus ring
15
15
Air filter
27
Elevator button
6
Remote sensor
13
Lens cap
14
S-VIDEO IN port
11
AUDIO IN R and L ports
10
RGB IN 1 and 2 ports
10
VIDEO IN port
11
AC power inlet
3
S
T
A
N
D
B
Y
/O
N
IN
P
U
LANP
TENP
POWER
T
K
E
Y
S
T
O
N
E
R
E
S
E
T
Elevator button
6
CONTROL port
Power switch
10
14
RGB OUT port
12
USB port
10
COMPONENT VIDEO port
11
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 5
THE REMOTE CONTROL
SEARCH button
22
14
STANDBY/ON button
RGB button
15
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
VIDEO button
AUTO button
BLANK button
15
22
19
22
ASPECT
BLANK
VOLUME
ASPECT button
HOME
END
PAGE UP
MAGNIFY
ON
VOLUME button
MUTE button
17
17
20
MAGNIFY buttons
21
PAGE DOWN
MUTE
OFF
FREEZE
KEYSTONE
FREEZE button
KEYBOARD buttons
POSITION button
KEYSTONE button
21
24
18
POSITION
MENU
MENU button
23
ENTER
,
,
,
23
23
Cursor buttons
ESC
RESET
RESET button
ENTER button
24
23
ESC button
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 6
SETTING UP THE PROJECTOR
CAUTION • Install the projector in a suitable environment according to instructions
of the accompanying manual “SAFETY INSTRUCTIONS” and this manual.
• If you press the elevator buttons without holding the projector, the projector might
crash down, overturn, smash your fingers and possibly result in malfunction. To
prevent damaging the projector and injuring yourself, ALWAYS HOLD THE
PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
Adjusting the Projector's Elevator Feet
You can use the elevator feet to make adjustments if the surface on which you
need to set the projector is uneven or if you otherwise need to adjust the angle of
projection. The adjustment range of the elevator feet is 0 to 9 degrees.
Press and hold in the elevator
buttons
1
Raise or lower the projector to the
2
desired height and then release the
elevator buttons
When you release the elevator buttons, the elevator
feet will lock into position.
As necessary, you can also finely
3
adjust the height of the projector by
twisting the elevator feet by hand
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 7
Adjusting the Screen Size and Projection Distance
Refer to the illustrations and tables below to determine the screen size and
projection distance.
The values shown in the table are calculated for a full size screen
(CP-S318: 800x600 pixels/CP-X328: 1024x768 pixels).
a:Distance from the projector to the screen (±10%)
b:Distance from the lens center to the bottom of the screen (±10%)
c:Distance from the lens center to the top of the screen (±10%)
The screen
Top view
If 4:3 aspect ratio
4
3
a [inch (m)]
Min. Max.
b
c
Screen Size [inch (m)]
[inch (cm)] [inch (cm)]
30 (0.8)
40 (1.0)
50 (1.3)
60 (1.5)
70 (1.8)
80 (2.0)
90 (2.3)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.0)
250 (6.3)
300 (7.5)
35 (0.9) 42 (1.1) 1 (2) 17 (44)
47 (1.2) 56 (1.4) 1 (3) 23 (58)
59 (1.5) 71 (1.8) 1 (4) 29 (73)
71 (1.8) 85 (2.2) 2 (4) 34 (87)
83 (2.1) 100 (2.5) 2 (5) 40 (102)
95 (2.4) 114 (2.9) 2 (6) 46 (116)
107 (2.7) 129 (3.3) 3 (7) 51 (131)
119 (3.0) 143 (3.6) 3 (7) 57 (145)
143 (3.6) 172 (4.4) 3 (9) 69 (174)
180 (4.6) 216 (5.5) 4 (11) 86 (218)
240 (6.1) 288 (7.3) 6 (15) 114 (290)
300 (7.6) 361 (9.2) 7 (18) 143 (363)
360 (9.2) 433 (11.0) 9 (22) 171 (435)
Lens center
c
Side view
Top view
b
a
The screen
If 16:9 aspect ratio
16
9
a [inch (m)]
Min. Max.
b
c
Screen Size [inch (m)]
[inch (cm)] [inch (cm)]
30 (0.8)
40 (1.0)
50 (1.3)
60 (1.5)
70 (1.8)
80 (2.0)
90 (2.3)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.0)
250 (6.3)
300 (7.5)
38 (1.0) 46 (1.2) 2 (4)
51 (1.3) 61 (1.6) 2 (5)
64 (1.6) 77 (2.0) 3 (6)
77 (2.0) 93 (2.4) 3 (8)
90 (2.3) 109 (2.8) 4 (9)
104 (2.6) 125 (3.2) 4 (10) 43 (110)
117 (3.0) 140 (3.6) 5 (12) 49 (124)
130 (3.3) 156 (4.0) 5 (13) 54 (137)
156 (4.0) 188 (4.8) 6 (15) 65 (165)
196 (5.0) 235 (6.0) 8 (19) 81 (206)
261 (6.6) 314 (8.0) 10 (26) 108 (275)
327 (8.3) 393 (10.0) 13 (32) 135 (343)
393 (10.0) 472 (12.0) 15 (39) 162 (412)
16 (41)
22 (55)
27 (69)
32 (82)
38 (96)
c
Lens center
Side view
b
a
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 8
CONNECTING YOUR DEVICES
Devices You Can Connect to the Projector
(Refer to this section for planning your device
configuration to use for your presentation.)
CAUTION • Incorrect connecting could result in fire or electrical shock. Please
read this manual and the separate “SAFETY INSTRUCTIONS”.
ATTENTION Precautions to observe when connecting other devices to the projector
• Whenever attempting to connect other devices to the projector, please thoroughly
read the manual of each device to be connected.
• TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to
connect a live device to the projector may generate extremely loud noises or other
abnormalities that may result in malfunction and/or damage to the device and/or
projector. Refer to the “TECHNICAL” of the USER’S MANUAL (Vol.2) for the pin
assignment of connectors and RS-232C communication data.
• Make sure that you connect devices to the correct port. Incorrect connection may
result in malfunction and/or damage to the device and/or projector.
• A component cable and some other cables have to be used with core set. Use the
accessory cable or a designated-type cable for the connection. For cables that have
a core only at one end, connect the core to the projector.
• Secure the screws on the connectors and tighten.
Indicates the
corresponding
reference page
Display monitors
12
DVD players
11
10 Laptop computers
VCRs
11
Desktop computers
10
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 9
Ports and Cables
Refer to the table below to find out which projector port and cable to use for connecting a
given device. Use this table for determining which cables to prepare.
Function
Projector Port
Connection Cables
RGB IN 1
Accessory RGB cable or optional RGB
cable with D-sub 15-pin shrink jack and
inch thread screws
RGB input
RGB IN 2
RGB OUT
USB
RGB output
USB mouse control
PS/2 mouse control
ADB mouse control
Serial mouse control
RS-232C communication
Accessory USB cable
Optional PS/2 mouse cable
Optional ADB mouse cable
Optional serial mouse cable
Optional RS-232C cable
CONTROL
S-VIDEO IN
Optional S-video cable with mini DIN 4-pin
jack
S-video input
Video input
VIDEO IN
Accessory audio/video cable
COMPONENT VIDEO Y
COMPONENT VIDEO CB/PB
COMPONENT VIDEO CR/PR
AUDIO IN L
Component video input
Audio input
Optional component video cable
Accessory audio/video cable or optional
audio cable with RCA jack
AUDIO IN R
NOTE
About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible. Please take advantage of this function by connecting the accessory RGB
cable to the RGB IN 1 port (DDC 1/2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
• Plug-and-Play may not function properly with some type of computers. Use the RGB
IN 2 port if Plug-and-Play does not function correctly.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 10
CONNECTING YOUR DEVICES (continued)
Connecting to a Computer
ATTENTION Whenever attempting to connect a laptop computer to the projector,
be sure to activate the laptop's RGB external image output (set the laptop to CRT
display or to simultaneous LCD and CRT display). For details on how this is done,
please refer to the instruction manual of the corresponding laptop computer.
1
RGB IN
2
1
RGB IN
2
K
K
AUDIO IN
AUDIO IN
S-VIDEO IN
S-VIDEO IN
R
L
/
(MONO) VIDEO IN
A
R
L
/
(MONO) VIDEO IN
A
C
C
B
B
CR
/ RR
CB
/
PB
Y
CR
/ RR
CB
/
PB
Y
B
D
COMPONENT VIIDEO
RGB OUT
CONTROL
COMPONENT VIIDEO
RGB OUT
CONTROL
USB
USB
A
B
A
C
D
B
USB cable
If connecting to a
USB port equipped
computer
Laptop computer
Desktop computer
NOTE
• Some computers may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• For some RGB input modes, the optional Mac adapter is necessary.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 11
Connecting to a DVD Player
1
RGB IN
2
K
AUDIO IN
(MONO) VIDEO IN
S-VIDEO IN
R
L
/
B
B
B
C
CR
/ RR
CB
/
PB
Y
A
A
A
COMPONENT VIIDEO
RGB OUT
CONTROL
USB
A
B
C
S-VIDEO cable
If using a S-video
connection
If using an audio/video
connection
If using a component
video connection
DVD player
Connecting to a VCR
1
RGB IN
2
K
AUDIO IN
(MONO) VIDEO IN
S-VIDEO IN
R
L
/
A
A
A
B
CR
/ RR
CB
/
PB
Y
COMPONENT VIIDEO
RGB OUT
CONTROL
USB
A
B
S-VIDEO cable
If using a S-video
connection
VCR
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 12
CONNECTING YOUR DEVICES (continued)
Connecting to a Display Monitor
1
RGB IN
2
K
AUDIO IN
L / (MONO) VIDEO IN
S-VIDEO IN
R
CR
/ RR
CB
/ PB
Y
A
COMPONENT VIIDEO
RGB OUT
CONTROL
USB
A
Display monitor
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 13
USING THE REMOTE CONTROL
Putting batteries into the remote control unit
CAUTION Precautions to observe in regards to the batteries
Always handle the batteries with care and use them only as directed. Improper use may result in
battery cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.
• Keep the battery away from children and pets.
•
•
Be sure to use only the batteries specified for use with the remote control. Do not mix new batteries with used ones.
When inserting batteries, verify that the plus and minus terminals are aligned correctly (as indicated in the remote control).
• When you dispose the battery, you should obey the law in the relative area or country.
Remove the battery
cover
Close the battery
cover
Insert the batteries
Align and insert the two AA
batteries (that came with the
projector) according to their plus
and minus terminals (as indicated
in the remote control).
1
2
3
Slide back and remove
the battery cover in the
direction of the arrow.
Replace the battery cover
in the direction of the arrow
and snap it back into place.
Operating the remote control
•
•
The remote control works with both the
projector's front and rear remote sensors.
The range of the remote sensor on the front and
back is 3 meters with a 60-degree range (30
degrees to the left and right of the remote sensor).
Since the remote control uses infrared light to send
signals to the projector (Class 1 LED), be sure to
•
approximately
3 meters
approximately
3 meters
use the remote control in an area free from
obstacles that could block the remote control's
output signal to the projector.
ATTENTION
Precautions to observe when using the remote control
• Do not drop or otherwise expose the remote control to physical impact.
•
Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction.
• Remove the batteries from the remote control and store them in a safe place if you
won't be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts to malfunction.
•
When strong light, such as direct sunlight or light from an extremely close range (such as from an
inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function.
Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 14
TURNING ON THE POWER
Precautions
～
8
12
Connect all devices to be used to the projector prior to turning on the power.
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
Make sure that the power cord is firmly and
correctly connected to the projector and outlet
1
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
3
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
Turn on the projector's power
PAGE DOWN
MUTE
2
Set the power switch to [ | ] (ON). The projector will go
to STANDBY mode and the POWER indicator will light to
OFF
FREEZE
KEYSTONE
solid orange.
power switch
Control panel
LANP
TENP
POWER
POWER indicator
STANDBY/ON INPUT KEYSTONE RESET
LA
N
P
P
TE
N
ER
NE
P
O
W
RE
SE
T
LAN
P
E
TE
ER
YSTONE
NP
PO
W
RESET
T E S E R
E N O T S Y E K
R
E
W
O
P
T
U
P N
I
P N
P N A
N O
/
Y B D N A T S
E
T
L
Press the STANDBY/ON button (control
panel or remote control)
3
4
• The projector begins warming up and the POWER
indicator blinks green.
STANDBY/ON
• The POWER indicator stops blinking
and lights to solid green once the
projector's power is completely on.
NOTE
Turn the
power on/off in
right order.
• Power on the
projector before the
computer or video
tape recorder.
Remove the lens cap
The picture is projected.
• Power off the
projector after the
computer or video
tape recorder.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 15
Selecting an Input Signal
Using the remote control
Using the projector's control panel
5
If selecting RGB input
Press the RGB button
Press the INPUT button
As illustrated below, each time you
press the INPUT button, the projector
switches between its input signal
ports. Select the signal you wish to
project.
Press this button to toggle between the
devices connected to RGB IN 1 and 2.
As illustrated below, each time you
press the RGB button, the projector
switches between RGB IN 1 and 2.
Select the signal you wish to project.
INPUT
RGB
RGB IN 1
RGB IN 2
RGB IN 1
RGB IN 2
VIDEO IN
If selecting video input
Press the VIDEO button
COMPONENT VIDEO
S-VIDEO IN
Press this button to toggle between the
devices connected to VIDEO IN, S-
VIDEO IN and COMPONENT VIDEO. As
illustrated below, each time you press
the VIDEO button, the projector
switches between VIDEO IN, S-VIDEO
IN and COMPONENT VIDEO. Select the
signal you wish to project.
VIDEO IN
S-VIDEO IN
VIDEO
COMPONENT VIDEO
Use the zoom ring to adjust the
screen size
6
7
Use the focus ring to focus the
picture
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 16
TURNING OFF THE POWER
Press the STANDBY/ON button (control
1
panel or remote control)
The message "Power off?" will appear on the screen for approximately 5 seconds.
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
STANDBY/ON
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
PAGE DOWN
MUTE
OFF
FREEZE
KEYSTONE
Press the STANDBY/ON button again
(control panel or remote control)
Press the STANDBY/ON button again while the "Power off?"
message is visible. The projector lamp goes off and starts cooling
down. The POWER indicator blinks orange while the lamp cools
down. (Pressing the STANDBY/ON button while the POWER
indicator is blinking orange has no effect.)
2
POSITION
MENU
ENTER
ESC
RESET
The system goes into the STANDBY mode after cooling
down and the POWER indicator stops blinking orange and
then lights to solid orange.
STANDBY/ON
Control panel
LANP
TENP
Check that the POWER indicator stops
3
4
POWER
blinking and lights to solid
power switch
orange.
Switch the power switch to
[O] (OFF).
STANDBY/ON INPUT KEYSTONE RESET
POWER indicator
LA
N
P
P
KE
TE
N
ER
P
O
W
RE
SE
T
LANP
TENP
ER
EYSTONE
PO
W
RESET
T E S E R
E N O T S Y E K
R
E
W
O
P
T
U
P N
I
P N
P N A
N O
/
Y B D N A T S
E
T
L
Confirm that the POWER indicator has
gone off and then attach the lens cap.
When the projector has completed powering down, the
POWER indicator will go off.
NOTE
• Except in
emergencies, follow
the above-
mentioned
procedure for
turning power off.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 17
ADJUSTING THE VOLUME
VOLUME
Press the VOLUME button
1
As illustrated on the right, a dialog will
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
appear on the screen to aid you in adjusting
the volume.
ASPECT
BLANK
VOLUME
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
PAGE DOWN
MUTE
16
OFF
FREEZE
KEYSTONE
Press the
,
buttons to adjust
2
POSITION
MENU
the volume
Press the VOLUME button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
ENTER
ESC
RESET
VOLUME
Press this to increase the volume
Press this to decrease the volume
16
TEMPORARILY MUTING THE SOUND
Press the MUTE button
1
STANDBY/ON
As illustrated on the right, a dialog will appear on the
screen indicating that you have muted the sound. Press
the VOLUME button to close the dialog. (Even if you don't
do anything, the dialog will automatically disappear after
a few seconds.)
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
PAGE DOWN
MUTE
OFF
Press the MUTE button again to restore the sound.
FREEZE
KEYSTONE
VOLUME
MUTE
POSITION
MENU
ENTER
ESC
RESET
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 18
ADJUSTING THE POSITION
Press the POSITION button
1
As illustrated on the right, a dialog will appear on the screen
to aid you in adjusting the position.
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
PAGE DOWN
MUTE
POSITION
OFF
FREEZE
KEYSTONE
POSITION
POSITION
MENU
ENTER
Use the
,
,
,
buttons to adjust
2
ESC
RESET
the position
When you want to initialize the position, press the RESET
button during adjustment.
Press the POSITION button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
This function is only available for RGB IN 1/2 input.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 19
USING THE AUTOMATIC ADJUSTMENT FEATURE
Press the AUTO button
1
AUTO
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
Automatic Adjustment for RGB Input
Horizontal position (H. POSIT), vertical position (V.
POSIT), clock phase (H. PHASE) and horizontal size (H.
SIZE) are automatically adjusted.
PAGE DOWN
MUTE
OFF
FREEZE
KEYSTONE
Make sure that the application window is set to its
maximum size prior to attempting to use this feature.
Dark pictures may still be incorrectly adjusted. Use a
bright screen when adjusting.
POSITION
MENU
ENTER
ESC
RESET
Automatic Adjustment for Video Input
The signal type best suited for the respective input
signal is selected automatically.
This feature is available only if VIDEO is set to AUTO in
the INPUT menu.
NOTE
The automatic adjustment operation requires approximately 10 seconds. Also, please
note that it may not function correctly with some input signals.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 20
CORRECTING KEYSTONE DISTORTIONS
Press the KEYSTONE button
KEYSTONE
1
As illustrated on the right, a dialog will appear
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
on the screen to aid you in correcting the
distortion.
ASPECT
BLANK
VOLUME
KEYSTONE
MAGNIFY
ON
HOME
END
PAGE UP
PAGE DOWN
MUTE
OFF
16
FREEZE
KEYSTONE
POSITION
MENU
Use the
,
buttons to select the
2
3
direction of distortion to correct (
/
)
ENTER
ESC
RESET
Use the
distortion
,
buttons to correct the
Press the KEYSTONE button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
NOTE
• This function may not be work well with some types of input signals.
• The adjustable range for correcting keystone distortions will vary with the type of
input signal.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 21
USING THE MAGNIFY FEATURE
Press the MAGNIFY (ON) button
MAGNIFY
1
The projector enters MAGNIFY mode.
ON
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
Press the POSITION button, then use the
,
,
2
PAGE DOWN
MUTE
,
buttons to select the area to enlarge and then
OFF
press the POSITION button again to confirm your
selection
FREEZE
KEYSTONE
POSITION
POSITION
POSITION
MENU
ENTER
ESC
RESET
Press the
,
buttons to zoom in and
3
out of the selected area.
Press the MAGNIFY (OFF) button to exit MAGNIFY mode
and restore the screen to normal. (The projector will also
automatically exit MAGNIFY mode if there is a change in the
input signal's state.)
NOTE
The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT,
AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state.
FREEZING THE SCREEN
Press the FREEZE button
MAGNIFY
ON
HOME
PAGE UP
VOLUME
1
FREEZE
The [II] icon appears and the screen will freeze at
the current image. Press the FREEZE button again
and the [ ] appears as the projector exits FREEZE
mode.
END
PAGE DOWN
MUTE
OFF
FREEZE
KEYSTONE
POSITION
MENU
NOTE
•
•
The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO,
BLANK ON/OFF or MENU ON/OFF feature is used, or, if there is a change in the input signal's state.
If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode),
the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 22
SIGNAL SEARCHING
Press the SEARCH button
1
When you press the SEARCH button, the projector begins
searching for input signals. If it detects an input signal, the
search will cease and the projector will project the detected
signal. If the projector is unable to find an input signal at any of
its ports, it will return to the state it was in prior to the search.
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
PAGE DOWN
MUTE
OFF
SEARCH
RGB IN 1
RGB IN 2
VIDEO IN
FREEZE
KEYSTONE
S-VIDEO IN
COMPONENT VIDEO
SELECTING THE ASPECT RATIO
Press the ASPECT button
1
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
ASPECT
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
PAGE DOWN
MUTE
RGB IN 1, RGB IN 2, COMPONENT VIDEO
(HDTV signals : 1125i (1035i/1080i), 750p)
OFF
FREEZE
KEYSTONE
4:3
16:9
VIDEO IN, S-VIDEO IN, COMPONENT VIDEO
POSITION
MENU
(Non-HDTV signals : 525i, 525p,625i)
ENTER
4:3
16:9
SMALL
ESC
RESET
TEMPORARILY BLANKING THE SCREEN
Press the BLANK button
1
The input signal screen is shut off, and a blank screen
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
appears. You can set the blank screen using the menu
(from the SCREEN menu, select BLANK). Press the BLANK
button again to remove the blank screen, and return to the
input signal screen.
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
PAGE DOWN
MUTE
OFF
FREEZE
KEYSTONE
BLANK
POSITION
MENU
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 23
USING THE MENU FUNCTIONS
MENU
Press the MENU button
1
The menu display appears on the screen. The
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
projector has the following menus: MAIN,
PICTURE-1, PICTURE-2, INPUT, SCREEN, and
ASPECT
BLANK
VOLUME
OPTION. Select a menu using the
/
buttons. The
MAGNIFY
ON
HOME
END
PAGE UP
current settings of the items that can be manipulated via the
selected menu appear.
PAGE DOWN
MUTE
OFF
FREEZE
KEYSTONE
/
Select a menu using the
buttons,
2
then press the
or ENTER button.
POSITION
MENU
The display of the selected menu appears.
ENTER
[ex. Adjusting SHARPNESS]
Use the
the
/
buttons to select PICTURE-1, then press
ESC
RESET
or ENTER button.
MENU
MAIN
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
–1
+1
–1
+1
–1
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
TINT
ENTER
: SELECT
/
Select an item using the
or ENTER button.
buttons, then press the
3
The operation display of the selected item appears. To adjust a numerical value,
press the
or ENTER button again to switch to the single menu (small display
showing only the operation display area).
[ex. Adjusting SHARPNESS]
Use the
press the
/
buttons to select SHARPNESS, then
or ENTER button.
MENU
MAIN
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
TINT
ENTER
0
: SELECT
/
Press the
buttons to adjust the level.
4
Press the MENU button to hide the menu and finish your operation. Alternatively,
press the
[ex. Adjusting SHARPNESS]
Use the buttons to adjust the SHARPNESS.
or ESC button to return to the previous display.
/
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 24
OPERATING THE PC SCREEN
You can use the remote control as a simplified mouse or keyboard.
CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment.
•
•
•
Only connect to a PC.
Before connecting, read the manuals of the device you will connect.
Do not unplug the connector cables while the computer is operating.
PS/2, ADB, Serial Mouse Control
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
1. Turn off the projector and PC power, and connect the projector’s
CONTROL terminal to the computer via the mouse cable.
2. If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control
function is given priority, and mouse control from the CONTROL terminal will not function.
3. Turn on the projector power, then the computer.
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
PAGE DOWN
MUTE
The functions in the table below can be controlled. If you have difficulty with control,
restart the computer (either from the software or by pressing the restart button).
OFF
FREEZE
KEYSTONE
Available Functions
Remote Control Operation
Move Pointer
Use
buttons
POSITION
MENU
Left click with mouse
Right click with mouse
Press ENTER button
Press RESET button
ENTER
ESC
RESET
USB Mouse/Keyboard Control
1. Connect the projector’s USB terminal to the computer using a USB cable.
The functions in the table below can be controlled.
Available Functions
Remote Control Operation
Move Pointer
Use
buttons
Left click with mouse
Press ENTER button
Press RESET button
Press HOME button
Press END button
Right click with mouse
Press keyboard’s HOME key
Press keyboard’s END key
Press keyboard’s PAGE UP key
Press keyboard’s PAGE DOWN key
Press keyboard’s ESC key
Press PAGE UP button
Press PAGE DOWN button
Press ESC button
NOTES
•
It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g.
track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and
select external mouse, and disable the pointing devices. In addition, the mouse may not function if the
computer does not have the needed utility program. See your computer’s hardware manual for details.
The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to
use the remote control, depending on the computer’s configurations and mouse drivers.
The USB control can only be used for the functions listed above. You cannot do things like press two buttons
at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).
This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and
display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.
•
•
•
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 25
THE LAMP
HIGH VOLTAGE
HIGH TEMPERATURE
HIGH PRESSURE
Before replacing the lamp, check the serial number of the replacement lamp bulb (sold separately)
then contact your local dealer. Before replacing the lamp, turn off the power, and unplug the power
cord, then wait at least 45 minutes, in order to ensure that the lamp is properly cooled.
Removing the lamp bulb while it is still hot could cause burns, or cause the lamp bulb to burst.
The LCD projector uses a glass lamp bulb. It is a mercury lamp with high
WARNING
internal pressure. High-pressure mercury lamps can break with a loud
bang, or burn out, if jolted or scratched, or through wear over time. Each lamp has a
different lifetime, and some may burst or burn out soon after you start using them. In
addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing,
and for gas containing mercury to escape from the projector’s vent holes.
•
•
Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
7
If the replace lamp indicator (see "Related Messages" (Vol.2
) and "Regarding the
8
indicator Lamps" (Vol.2
)) comes on, replace the lamp as soon as possible. Using the
lamp for long periods of time, or past the replacement date, could cause it to burst. Do
not use old (used) lamps; this is a cause of breakage.
•
•
•
If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems
elsewhere besides the lamp. If this happens, contact your local dealer.
If the lamp should break (it will make a loud bang when it does), ventilate the room well, and make
sure not to breathe the gas that comes out of the projector vents, or get it in your eyes or mouth.
If the lamp should break (it will make a loud bang when it does), unplug the power cord from
the outlet, and make sure to request a replacement lamp from your local dealer. Note that
shards of glass could damage the projector’s internals, or cause injury during handling, so
please do not try to clean the projector or replace the lamp yourself.
•
Obey local ordinances when disposing of used lamps. In most cases, it is possible to dispose of used
bulbs in the same manner as used glass bottles, but in some cases, bulbs are sorted separately.
• Do not use the projector with the lamp cover removed.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 26
THE LAMP (continued)
Replacing the lamp
All projector lamps will wear out eventually. If used for long periods of time, the image could become
darkened, and the color contrast could be impacted as well. We recommend that you replace your lamps
early. If the LAMP indicator turns red, or a message prompts you to replace the lamp when you power up
the projector, the lamp needs to be replaced. (See "Related Messages" (Vol.2
Indicator Lamps" (Vol.2 ) for details.)
7
) and "Regarding the
8
Turn off the projector, and unplug the
power cord. Allow the lamp bulb to cool
for at least 45 minutes, and prepare a
new lamp.
Insert the new lamp, and tighten the 1
screw firmly to lock it in place
1
5
•
Also steadily push the opposite side of the
screwed side of the
lamp into the unit.
After making sure that the projector has
cooled adequately, slowly flip over the
projector, so that the bottom is facing up
2
3
Replace the lamp cover, and tighten
the 2 screws firmly to lock it in
place
Unscrew the 2
screws, and
remove the
lamp cover
6
Unscrew the 1 screw, and slowly pull
out the lamp by the handle
4
Slowly turn the projector so that
the top is facing up
•
Be careful not to touch the inside of the lamp case.
7
8
Turn on the projector power, and using
the menu, reset the lamp timer
•
To reset the lamp timer, from the OPTION
menu, select LAMP TIME.
ATTENTION • Make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.
• Do not use with lamp cover removed.
•
Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing
the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.
• When the lamp has been replaced after the message of "CHANGE THE LAMP ...THE POWER
WILL TURN OFF AFTER 0 hr." is displayed, or the LAMP indicator is red, complete the following
operation within 10 minutes of switching power ON.
NOTE
• The LAMP indicator is also red when the lamp unit reaches high temperature.
Before replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power
ON again. If the LAMP indicator is still red, replace the lamp.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 27
THE AIR FILTER
Caring for the air filter
The air filter should be cleaned about every 100 hours. If the LAMP indicator and
TEMP indicator blink red simultaneously, or a message prompts you to clean the air
filter when you turn on the unit, the filter needs to be cleaned. (See "Related
7
8
Messages" (Vol.2
) and "Regarding the Indicator Lamps" (Vol.2
) for details.)
Turn off the projector, and unplug the power cord
1
2
Apply a vacuum cleaner to
the top of the air filter cover
to clean the air filter
Air Filter Cover
Turn on the projector, and use the menu to reset the filter
timer
3
• To reset the air filter timer, from the OPTION menu, select FILTER TIME.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 28
THE AIR FILTER (continued)
Replacing the air filter
If the soiling will not come off the air filter, or it becomes damaged, then it needs to be
replaced. Please contact your local dealer, after confirming the model of your
10
separately sold replacement air filter. (See "Optional Parts" on Vol.2
.)
Turn off the projector, and unplug the power cord. Prepare a
new air filter (one specified for your projector)
1
2
Remove the air filter cover and air filter
Insert the new filter, and replace the
filter cover
3
4
Turn on the projector power, and using the menu, reset the
filter timer
• To reset the lamp timer, from the OPTION menu, select FILTER TIME.
ATTENTION • Make sure to turn off the power and unplug the power cord before caring for
the unit. Please carefully read "Safety Instructions", in order to care for your projector correctly.
• Do not use with air filter cover removed.
• If the air filter becomes clogged by dust or the like, internal temperature rises and could cause
malfunction. The power is automatically turned off in order to prevent the unit from overheating
internally.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/最終 03.5.27 2:22 PM ページ 29
OTHER CARE
Caring for the inside of the projector :
In order to ensure the safe use of your projector, please have it cleaned and inspected by
your local dealer about once every 2 years. Never try to care for the inside of the unit
yourself. Doing so is dangerous.
Caring for the lens :
Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the
lens directly with your hand.
Caring for the cabinet and remote control transmitter :
Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or a
neutral cleanser diluted in water, and wipe lightly after wringing well. Then, wipe lightly
with a soft, dry cloth.
ATTENTION • Make sure to turn off the power and unplug the power cord before caring for
the unit. Please carefully read "Safety Instructions" in this manual, in order to care for your projector
correctly.
• Do not use cleaners or chemicals other than those listed above, including benzene and paint
thinner.
• Do not use aerosols or sprays.
• Do not polish or wipe with hard objects.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/Vol2-E責
了 03.5.27 2:30 PM ページ 1
LCD Projector CP-322i
USER'S MANUAL Vol.2 (Extended)
Thank you for purchasing this projector.
WARNING • Please read the accompanying manual “SAFETY
INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct
usage through understanding. After reading, store this instruction manual in a
safe place for future reference.
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual
• The reproduction, transmission or use of this document or contents is not permitted without express
written authority.
TRADEMARK ACKNOWLEDGEMENT :
• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• All other trademarks are the property of their respective owners.
CONTENTS
Page
MULTIFUNCTIONAL SETTINGS ........................................................................2
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED ......7
SPECIFICATIONS .............................................................................................10
WARRANTY AND AFTER-SERVICE................................................................11
.......................................................................................
For "TECHNICAL" see the end of this manual.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/Vol2-E責
了 03.5.27 2:30 PM ページ 2
MULTIFUNCTIONAL SETTINGS
This device has 6 separate menus: MAIN, PICTURE 1, PICTURE 2, INPUT,
SCREEN, OPTION. Each of these menus is operated using the same methods.
The basic operations of these menus are as follows.
Menu screen display : Press the "MENU" button.
Menu selection
: Choose a menu name using the
/
button, and press the
button or the ENTER button.
Item selection
: Choose an item using the
button or the ENTER button.
/
button, and press the
Return menu to last previous screen: Press the
button or the ESC button.
Execution of settings and/or adjustments Operate by using the
:
/
button. (For further
details, read the explanation for each separate menu.)
I
nitialization of settings and/or adjustments: During operation, press the RESET button.
(Note that items whose functions are
performed simultaneously with the operation
of clock phase, language selection, automatic
adjustment, etc., cannot be initialized.)
End menu operations: Press the MENU button, or do not perform any operation for
several seconds.
MENU
MAIN
BRIGHT
CONTRAST
ASPECT
PICT. POSIT.
GAMMA
MIRROR
MAIN Menu
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
With the MAIN menu, the seven items shown in the Table below can be
performed.
LANGUAGE
12
Perform each operation in accordance with the instructions in the Table.
: SELECT
Example : MAIN Menu
(BRIGHT)
MAIN Menu
Item
Description
BRIGHT
Adjust Brightness: Light
⇔
Dark
CONTRAST
Adjust Contrast: Strong
⇔
Weak
Select Aspect Ratio:
At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEO
Input:
ASPECT
4:3
At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:
4:3 16:9 SMALL
⇔
16:9
⇔
⇔
• The SMALL picture may not be displayed correctly with certain input signals.
Select Picture Position (for 16:9/SMALL Picture):
PICT.POSIT.
GAMMA
TOP
⇔
CENTER
⇔
BOTTOM
DYNAMIC
V:INVERT
Select Gamma Mode:
NORMAL CINEMA
⇔
⇔
Select Mirror Status:
NORMAL H:INVERT
MIRROR
⇔
⇔
⇔
H&V:INVERT
Select Menu Language:
ENGLISH
⇔
FRANÇAIS
⇔
DEUTSCH
⇔
ESPAÑOL
LANGUAGE
⇔
ITALIANO
⇔
NORSK
⇔
NEDERLANDS
⇔
日本語
⇔
POTUGUÊS
⇔
中文
⇔
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/Vol2-E責
了 03.5.27 2:30 PM ページ 3
MENU
MAIN
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
PICTURE 1 Menu
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
TINT
With the PICTURE 1 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
12
: SELECT
Example : PICTURE1 Menu
(COLOR BAL R)
PICTURE1 Menu
Item
Description
Adjust Red Color Balance: Dark
Adjust Blue Color Balance: Dark
Adjust Sharpness (for VIDEO/S-VIDEO): Clear
Adjust COLOR (for VIDEO/S-VIDEO/COMPONENT VIDEO):
COLOR BAL R
⇔
Light
Light
COLOR BAL B
SHARPNESS
⇔
⇔
Soft
COLOR
TINT
Dark Light
⇔
Adjust Tint (for VIDEO/S-VIDEO): Green
⇔
Red
MENU
MAIN
V POSITION
PICTURE 2 Menu
PICTURE-1
PICTURE-2
INPUT
H POSITION
H PHASE
H SIZE
SCREEN
OPTION
OVER SCAN
With the PICTURE 2 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
12
: SELECT
Example : PICTURE2 Menu
(V POSITION)
PICTURE2 Menu
Item
Description
Adjust Vertical Position (for RGB): Up
Adjust Horizontal Position (for RGB): Left
Adjust Horizontal Phase (for RGB/COMPONENT VIDEO):
V POSITION
H POSITION
⇔
Down
Right
⇔
H PHASE
H SIZE
Right Left
• Adjust to eliminate flicker.
⇔
Adjust Horizontal Size (for RGB): Large
• If the horizontal size adjustment is excessive, the image may not be displayed
correctly. In such a case, initialize H SIZE with the RESET button.
⇔
Small
Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO):
LARGE
⇔
MIDDLE
⇔
SMALL
OVER SCAN
• It is recommended to select SMALL to avoid flicker at the lower part of the
picture.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/Vol2-E責
了 03.5.27 2:30 PM ページ 4
MULTIFUNCTIONAL SETTINGS (continued)
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
VIDEO
HDTV
SYNC ON G
EXECUTE
INPUT Menu
SCREEN
OPTION
With the INPUT menu, the four items shown in the Table below can be
performed. With inputting of RGB IN 1 and RGB IN 2 signals, the
horizontal and vertical frequencies of the signals will be displayed on the
: SELECT
Example : INPUT Menu
(AUTO)
initial screen of the INPUT menu.
Perform each operation in accordance with the instructions in the Table.
INPUT Menu
Item
Description
Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H
PHASE, and H SIZE. Use this function with the maximum window size.
Auto Adjust (for VIDEO/S-VIDEO): Automatically selects the proper VIDEO
mode for the current input signal. This function is active only when the AUTO
mode is selected for the item VIDEO. Refer to the description for the item
VIDEO below.
AUTO
• This function may not be available with a PAL60 signal and certain other
signals.
• The AUTO mode operation requires approximately 10 seconds.
• For COMPONENT VIDEO, the signal type is identified automatically even if
this function is inactive. For a HDTV signal, refer to the item HDTV below.
Select Mode of Signal Type (for VIDEO/S-VIDEO):
AUTO
⇔
NTSC
M-PAL
⇔
PAL
⇔
SECAM
⇔
NTSC4.43
⇔
⇔
N-PAL
Selecting AUTO mode activates and performs the AUTO function for VIDEO/S-
VIDEO. It automatically selects the proper mode from among those above.
Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g.
The image becomes irregular, or lacks color.)
VIDEO
• AUTO mode may not function correctly with a PAL60 signal and certain other
signals.
• The AUTO mode operation requires approximately 10 seconds.
• For COMPONENT VIDEO, the signal type is identified automatically even if
this function is inactive. For a HDTV signal, refer to the item HDTV below.
Select HDTV Signal Mode:
1080i
⇔
1035i
HDTV
• If the selected HDTV mode is incompatible with the input signal, the picture
may be distorted.
On/Off SYNC ON G Mode:
TURN ON
⇔
TURN OFF
Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode
allows reception of SYNC on G.
SYNC ON G
• In the SYNC ON G mode, the picture may be distorted with certain input
signals. In such a case, remove the signal connector so that no signal is
received and turn SYNC ON G off, and then reconnect the signal.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/Vol2-E責
了 03.5.27 2:31 PM ページ 5
MENU
MAIN
BLANK
START UP
MyScreen
MyScreen Size
MyScreen Lock
MyScreen
ORIGNAL
SCREEN Menu
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
With the SCREEN menu, the five items shown in the Table below can be performed.
Please perform each operation in accordance with the instructions in the Table.
: SELECT
Example : SCREEN Menu
(BLANK)
SCREEN Menu
Item
Description
Selection of BLANK Screen:
MyScreen
⇔
ORIGINAL
⇔
.
.
⇔
.
.
⇔
.
.
The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen
has been erased (i.e., made to vanish) by manipulating the BLANK button (please refer to the
“Temporarily Blanking the Screen” section of the separate booklet, Vol. 1 (Basic)).
MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen
(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
Option screens: Various colored non-patterned (plain) screens displayed within the Menus.
• The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color
screen several minutes after being displayed.
BLANK
Selection of START UP Screen:
MyScreen
⇔
ORIGINAL
⇔
TURN OFF
The START UP Screen may be voluntarily selected. The START UP Screen is displayed when
no signal has been inputted, or when spec signals are being inputted.
MyScreen: Using the MyScreen category (see this Table, below), one can register a
desired screen (or screens). At the time of factory shipment, this is set as a non-patterned
(plain) blue color screen.
START UP
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
TURN OFF: A non-patterned (plain) blue color screen.
•
The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen several
minutes after being displayed.
Registration of MyScreen:
When this item is executed, the MyScreen Menu for registration of MyScreen for the BLANK Screen
and the START UP Screen is displayed. When operations are performed in accordance with this Menu,
one can “cut” and register desired screens from among the received images within the display.
1. After the “Do you start capturing this picture?” message has been displayed, pressing the ESC (or
RESET) button interrupts execution of the MyScreen. When the ENTER button is pressed, the
picture becomes static (no longer moves), and a frame for picture cutting, as well as the message
that follows below, appear. Please press the button when the screen you want to register is
currently being displayed.
MyScreen
2. When the “Move the capture area as you want.” message has been displayed, pressing the ESC (or RESET)
button will eliminate the static state of the picture, and operations can be performed again from operation 1.
The frame can be moved using the
,
,
,
buttons. After designating the screen
you want to register, pressing the ENTER button will initiate screen registration. The registration
process takes approximately 1 minute to complete.
3. When the registration has been completed, the screen of the registered MyScreen, plus the
message, “MyScreen registration is finished,” will be displayed for several seconds, after which
the operation is terminated.
Selection of MyScreen display size:
MyScreen Size
MyScreen Lock
x1
⇔
FULL
Invalidation of MyScreen registration function:
TURN ON
⇔
TURN OFF
When TURN ON is selected, the MyScreen category (see this Table, above) cannot be executed; in
this way, one can prohibit rewrites (“writeovers”) of the MyScreen.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/Vol2-E責
了 03.5.27 2:31 PM ページ 6
MULTIFUNCTIONAL SETTINGS (continued)
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION
VOLUME
OPTION Menu
AUTO OFF
WHISPER
LAMP TIME
FILTER TIME
With the OPTION menu, the five items shown in the Table below
can be performed.
Please perform each operation in accordance with the instructions
in the Table.
12
: SELECT
Example : OPTION Menu
(VOLUME)
OPTION Menu
Item
Description
VOLUME
Adjust Volume: High
⇔
Low
Adjust AUTO OFF Time:
Long (MAX. 99 min.)
⇔
Short (Min. 1 min.)
⇔
(DISABLE: 0 min.)
AUTO OFF
WHISPER
The system automatically enters the standby mode if no signal is received
within the set time. This function is inactive when DISABLE (0 min.) is selected.
Select WHISPER Mode:
NORMAL
⇔
WHISPER
When WHISPER is selected the WHISPER mode is activated. In the WHISPER
mode, acoustic noise and screen brightness are reduced.
Refer to LAMP TIME: When set, this function displays the total time the
projector lamp has been used since new.
Reset LAMP TIME [Use this function only when the lamp has been replaced!]:
Depress the RESET button for at least 3 seconds while lamp time is being
displayed. The reset menu will then appear. After you replace the lamp with a
LAMP TIME
new lamp, select RESET on the menu with the
button.
• Do not reset the lamp time unless you have replaced the lamp. And, always
reset the lamp time when replacing the lamp. The message functions will not
operate properly if the lamp time is not reset correctly.
• Before replacing the lamp, carefully read the descriptions headed "THE
LAMP".
Refer to FILTER TIME: This function displays the total time the air-filter has
been used since new.
Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:
Depress the RESET button for at least 3 seconds while lamp time is being
displayed. The reset menu will then appear. After you replace the filter, select
FILTER TIME
RESET on the menu with the
DEFAULT CANCEL
button.
⇔
• Do not reset the filter time unless you have cleaned or replaced the filter. And,
always reset the filter time when cleaning or replacing the filter. The message
functions will not operate properly if the filter time is not reset correctly.
•
Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/Vol2-E責
了 03.5.27 2:31 PM ページ 7
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED
Related Messages
When the unit's power is ON, messages such as those shown below may be displayed. When
any such message is displayed on the screen, please respond as described below.
Message
Description
CHANGE THE LAMP
Lamp usage time is approaching 2,000 hours. (Note 2)
Preparation of a new lamp, and an early lamp change, is
recommended. After you have changed the lamp, please be
sure to reset the lamp timer.
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
(Note 1)
Lamp usage time is approaching 2,000 hours. A lamp change
within ＊＊ hours is recommended. (Note 2)
When lamp usage reaches 2,000 hours, the power will
automatically be turned OFF. Please change the lamp by
referring to “THE LAMP” in Vol.1 (Basic). After you have
changed the lamp, please be sure to reset the lamp
timer.
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL TURN OFF
AFTER ＊＊ hr.
(Note 1)
As lamp use has reached 2,000 hours, the power will soon be
automatically turned OFF. (Note 2)
CHANGE THE LAMP
Please immediately turn the power OFF, and follow the
instructions in the “THE LAMP” section of the separate booklet,
Vol.1 (Basic).
After you have changed the lamp, please be sure to reset the
lamp timer.
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL TURN OFF
AFTER 0 hr.
A note of precaution when cleaning the air filter.
After cleaning the filter, operate FILTER TIME of the OPTION
Menu, and perform reset of the filter timer.
CLEAN THE AIR FILTER
AFTER CLEANING AIR FILTER,
RESET THE FILTER TIMER.
There is no input signal.
Please confirm the signal input connection, and the status of the
signal source.
NO INPUT IS DETECTED
ON ＊＊＊
The horizontal or vertical wavelength of the inputted signal is
outside of the response parameters of this unit. Please confirm
the specs for this unit or the signal source specs.
SYNC IS OUT OF RANGE
fH
fV
ON ＊＊＊
＊＊＊＊＊ kHz
＊＊＊＊＊ Hz
The internal portion temperature is rising. Please turn the power
OFF, and allow the unit to cool down for approximately 20
minutes. After having confirmed the following items, then please
resent the power to ON.
CHECK THE AIR FLOW
•
•
•
Is there blockage of the air passage aperture?
Is the air filter dirty?
Does the peripheral temperature exceed 35°C?
NOTES
Note 1: Although this message will be automatically disappeared after around 3 minutes, it will be
reappeared every time the power is turned ON.
Note 2: Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of
usage, a lamp will no longer light up, or the lamp will break or burst, etc. This unit is equipped
with an automatic shut-down function, such that the power will automatically be turned OFF
when lamp usage time has reached 2,000 hours. Please be aware, however, that among lamp
types, there are major differences in product lifetimes; a lamp may thus fail to light even prior
to the functioning of the automatic shut-down function of this unit.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/Vol2-E責
了 03.5.27 2:31 PM ページ 8
Regarding the Indicator Lamps
Lighting and flashing of the POWER indicator, the LAMP indicator, and the
TEMP indicator have the meanings as described in the Table below.
Please respond in accordance with the instructions within the Table.
POWER
LAMP
TEMP
Description
indicator indicator indicator
The orange
Turned OFF Turned OFF
The STANDBY mode is set
lamp is lighted (Not lighted) (Not lighted)
Flashing of the green lamp
The green lamp is lighted
Flashing of the orange lamp
Turned OFF
Turned OFF
Turned OFF
Turned OFF
Turned OFF
Turned OFF
The unit is warming up. Please wait.
The unit is in an ON state. Ordinary operations may be performed.
The unit is cooling down. Please wait.
The unit is cooling down. Please wait.
Blinking of the
red lamp
A certain error has been detected. Wait until the POWER indicator lamp has finished
flashing, and then perform the proper response measure using the item descriptions
below as reference.
-
-
The lamp does not light.
There is a possibility that the interior portion has become heated. Turn the power OFF and wait
approximately 20 minutes. After the main unit has cooled down, please confirm whether or not
there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or
not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,
turn the power ON again; if the same display is displayed, then please change the lamp.
The red lamp
is lighted, or
blinks
The red lamp
is lighted
Turned
OFF
Either there is no lamp and/or lamp cover, or either of these has not been properly fixed
(attached). Turn the power OFF and wait approximately 45 minutes. After the main unit has
sufficiently cooled down, please make confirmation of the attachment state of the lamp and
lamp cover. After performing any needed maintenance, turn the power ON again; if the same
display is displayed, then please contact a sales store or a service company.
The red lamp
is lighted, or
blinks
Blinking of the
red lamp
Turned
OFF
The cooling fan is not operating. Turn the power OFF and wait approximately 20 minutes. After the
main unit has cooled down, please make confirmation that no foreign matter has become caught in
the fan, etc. After performing any needed maintenance, turn the power ON again; if the same display
is displayed, then please contact a sales store or a service company.
The red lamp
is lighted, or
blinks
Blinking of the
red lamp
Turned
OFF
There is a possibility that the interior portion has become heated. Turn the power OFF and wait
approximately 20 minutes. After the main unit has cooled down, please confirm whether or not
there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or
not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,
turn the power ON again; if the same display is displayed, then please contact a sales store or a
service company.
The red lamp is
lighted, or
blinks
The red lamp is
lighted
Turned
OFF
There is a possibility that the interior portion has become overcooled. Please use the unit within
the usage temperature parameters (0°C to 35°C). After performing any needed maintenance,
turn the power ON again; if the same display is displayed, then please contact a sales store or a
service company.
The green lamp
is lighted
Alternative blinking
with the red lamp
This is a notification that it is time to clean the filter.
After cleaning the filter, operate the FILTER TIME portion of the OPTION Menu, and perform
reset of the FILTER TIME.
The green
Simultaneous blinking
with the red lamp
lamp is lighted
NOTE
When the interior portion has become overheated, for safety purposes, the power source is automatically turned OFF,
and the indicator lamps may also be turned OFF. Press the “○” (power OFF) side of the main power switch, and wait
for approximately 20 minutes. Please then use the unit only after having first confirmed that the unit has sufficiently
cooled down.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/Vol2-E責
了 03.5.27 2:31 PM ページ 9
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued)
Phenomena That May Easily Be Mistaken for Machine Defects
Before requesting repair, check in accordance with the following chart.
If the situation cannot be corrected, then contact your dealer.
Reference
Page(s)
Phenomenon
Cases not involving a machine defect
Items to be confirmed
The main power source is not ON.
Turn on the main power.
Vol.1-3, 14
The electrical power cord is not plugged in.
Correctly connect the power cord.
Be sure to press the “
of the main power switch, and leave this OFF
interrupted during operation, such as by for approximately 20 minutes. After the unit
O” (power OFF) side
Power does not
come ON
The main power source has been
Vol.1-14
a power outage (blackout), etc.
has sufficiently cooled down, turn ON the
power source.
The input changeover settings
are mismatched.
Select the input signal, and
correct the settings.
Vol.1-15
Vol.1-10, 11
Vol.1-10, 11
Vol.1-17
Vol.1-17
Vol.1-10, 11
Vol.2-2
No sound or
pictures are
outputted
No signal is being inputted.
Correctly connect the connection cord.
Correctly connect the connection cord.
Adjust the VOLUME setting to a higher level.
The electrical wiring to this unit
is not correctly connected.
Pictures are
displayed, but no
sounds are heard
The volume setting has been set at (or
adjusted to) an extremely low level.
Press the MUTE button to release
(change) the MUTE mode setting.
The MUTE mode is the current setting.
The electrical wiring to this unit
is not correctly connected.
Correctly connect the connection cord.
Sounds are
heard, but no
pictures are
displayed
The brightness setting has been set at Adjust the BRIGHT setting to a
(or adjusted to) an extremely low level.
brighter level.
The lens cap has not been removed.
Remove the lens cap.
Vol.1-14
Colors have a faded-
out appearance
Color tone is poor
Perform picture adjustments by changing the
COLOR BAL R, the COLOR BAL B, and/or the
TINT settings, etc.
Color depth setting or color tone setting
Vol.2-3
The brightness setting and/or contrast
setting has not been properly adjusted.
Perform picture adjustments by changing the
BRIGHT and/or CONTRAST settings, etc.
Vol.2-2
Vol.2-6
The WHISPER mode is the current Change (by releasing) from the
setting. WHISPER mode.
Pictures appear
dark
Lamp is approaching the end of its Exchange the old lamp with a new
Vol.1-25, 26
product lifetime.
Pictures appear Either the FOCUS setting or the H
PHASE is not properly adjusted.
lamp.
Vol.1-15
Vol.2-3
Adjust the FOCUS and H PHASE settings.
blurry
NOTE
Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and
such do not constitute or imply a machine defect.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/Vol2-E責
了 03.5.27 2:31 PM ページ 10
SPECIFICATIONS
NOTE • This specifications are subject to change without notice.
Item
Specification
Product name
Liquid crystal projector
1.8 cm (0.7 type)
Panel size
Liquid
crystal
panel
Drive system
TFT active matrix
Pixels
786,432 pixels (1024 horizontal x 768 vertical)
Lens
Zoom lens F=1.7 ~ 2.1 f=36.8 ~ 47.8 mm
Lamp
150 W UHB
Speaker
1.0W
Power supply
Power consumption
Temperature range
Size
AC100 ~ 120V, 2.7A / AC220 ~ 240V, 1.3A
240W
0 ~ 35°C (Operating)
295 (W) x 87.5 (H) x237 (D) mm
2.7 kg
Weight (mass)
RGB Terminal
AUDIO Terminal
RGB IN(1, 2) ..................2
AUDIO IN(R, L) ..............1
VIDEO Terminal
OUT Terminal
VIDEO IN ........................1
S-VIDEO IN ....................1
COMPONENT VIDEO
(Y, CB/PB,CR/PR)......1
RGB OUT........................1
CONTROL Terminal
CONTROL ......................1
Terminal
USB ................................1
Lamp
Air Filter
Optional Parts
* For others, consult your dealer.
Dimension Diagram
295
77.5
Unit : mm
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S317/327W/Vol2-E責
了 03.5.27 2:31 PM ページ 11
WARRANTY AND AFTER-SERVICE
If a problem occurs with the equipment, first refer to the 7 “WHAT TO DO WHEN YOU
THINK A MACHINE DEFECT HAS OCCURRED” section and run through the suggested
checks. If this does not resolve the problem contact your dealer or Technical Support.
They will tell you what warranty condition is applied.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S318/328W/TECHNICAl責
了 03.5.27 2:39 PM ページ 1
TECHNICAL
SIGNAL CONNECTOR PIN ASSIGNMENT
RGB IN [1]/[2]
RGB OUT
S-VIDEO
D-sub 15-pin Shrink
Mini Din 4-pin
Mini Din 4-pin
Pin No
Signal
Video input Red
Video input Green
Video input Blue
-
Pin No
9
Signal
-
Pin No Signal
Color:
1
2
3
4
5
6
7
8
10
Ground
0.286Vp-p (NTSC, burst signal),
75Ω terminator
0.3Vp-p (PAL/SECAM, burst signal),
75Ω terminator
Brightness:
1.0Vp-p, 75Ω terminator
11
-
1
RGB IN [1]: SDA (DDC)
Ground
12
RGB IN [2]:
RGB OUT :
-
-
Ground Red
Ground Green
Ground Blue
2
13
14
H. sync./ Composite sync.
Vertical sync
3
4
Ground
Ground
RGB IN [1]: SCL (DDC)
RGB IN [2]:
RGB OUT :
-
-
15
signal
Terminal
Specification
Video: Analog 0.7Vp-p, 75Ω terminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
RGB signal
input
RGB IN（1、2）
D-sub 15-pin shrink jack
VIDEO IN
1.0Vp-p, 75Ω terminator, RCA jack
Brightness signal: 1.0Vp-p, 75Ω terminator
Color signal: 0.286Vp-p (NTSC, burst signal),75Ω terminator
0.300Vp-p (PAL/SECAM, burst signal),75Ω terminator
Mini DIN 4-pin jack
S-VIDEO IN
Video signal
input
Y
1.0 Vp-p, 75 Ω Terminator (Positive)
COMPONENT
VIDEO
CB/PB 0.7 Vp-p, 75 Ω Terminator (Positive)
CR/PR 0.7 Vp-p, 75 Ω Terminator (Positive)
Audio
signal input
200mVrms, 50 kΩ (max. 3.0Vp-p)
RCA jack
AUDIO IN（R、L）
Video: Analog 0.7Vp-p, 75Ω output impedance (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
Signal output
RGB OUT
D-sub 15-pin shrink jack
1
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S318/328W/TECHNICAl責
了 03.5.27 2:39 PM ページ 2
EXAMPLE OF COMPUTER SIGNAL
Display mode
CP-S318
Resolution
fH (kHz)
fV (Hz)
Rating
Signal mode
H × V
CP-X328
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
720 × 400
640 × 480
640 × 480
640 × 480
640 × 480
640 × 480
800 × 600
800 × 600
800 × 600
800 × 600
800 × 600
832 × 624
1024 × 768
1024 × 768
1024 × 768
1024 × 768
1152 × 864
1280 × 960
1280 × 1024
1280 × 1024
37.9
31.5
35.0
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
60.0
64.0
80.0
85.0
59.9
66.7
72.8
75.0
85.0
56.3
60.3
72.2
75.0
85.1
74.5
60.0
70.1
75.0
85.0
75.0
60.0
60.0
75.0
VESA
VESA
TEXT
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
VGA (60Hz)
Mac13"mode
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac16"mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
SXGA (75Hz)
SXGA (60Hz)
SXGA (60Hz)
SXGA (75Hz)
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
Zoom out
Zoom out
Zoom out
Zoom out
Zoom out
Zoom out
Zoom out
Zoom out
Zoom out
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
Zoom out
Zoom out
Zoom out
Zoom out
Zoom out
1280 × 1024
1600 × 1200
91.2
75.0
85.0
60.0
VESA
VESA
SXGA (85Hz)
UXGA (60Hz)
Zoom out
Zoom out
Zoom out
NOTE • Some computers may have multiple display screen modes. Use of some
of these modes will not be possible with this projector.
• Be sure to check jack type, signal level, timing and resolution before connecting this
projector to a computer.
• Depending on the input signal, full-size display may not be possible in some cases.
Refer to the number of display pixels above.
• This projector will display up to UXGA (1600X1200) resolution signals but the image
will be rescaled to the native resolution of the projector. Best display performance is
achieved when the signal input resolution is the same as the native resolution of the
projector.
• The image may not be displayed correctly when the input sync. signal is “Composite
Sync.” or “Sync. on G”.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S318/328W/TECHNICAl責
了 03.5.27 2:39 PM ページ 3
INITIAL SET SIGNALS
The following signals are used for the initial settings.
The signal timing of some computer models may be different. In such case, refer to
adjust the V.POSIT and H.POSIT of the menu.
Back porch b
Front porch d
Back porch b
Display interval c
Front porch d
Display interval c
Sync a
Sync a
Computer /
Signal
Horizontal signal timing (µs)
Computer /
Signal
Vertical signal timimg (lines)
a
b
c
d
a
3
b
42
c
400
d
1
TEXT
2.0
3.0
20.3
1.0
TEXT
VGA (60Hz)
Mac 13"mode
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16"mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
1152×864 (75Hz)
1280×960 (60Hz)
1280×1024 (60Hz)
1280×1024 (75Hz)
1280×1024 (85Hz)
1600×1200 (60Hz)
3.8
2.1
1.3
2.0
1.6
2.0
3.2
2.4
1.6
1.1
1.1
2.1
1.8
1.2
1.0
1.2
1.0
1.0
1.1
1.0
1.2
1.9
3.2
3.8
3.8
2.2
3.6
2.2
1.3
3.2
2.7
3.9
2.5
1.9
2.2
2.2
2.4
2.9
2.3
1.8
1.4
1.9
25.4
21.2
20.3
20.3
17.8
22.2
20.0
16.0
16.2
14.2
14.5
15.8
13.7
13.0
10.8
10.7
11.9
11.9
9.5
0.6
2.1
1.0
0.5
1.6
0.7
1.0
1.1
0.3
0.6
0.6
0.4
0.3
0.2
0.5
0.6
0.9
0.4
0.2
0.4
0.4
VGA (60Hz)
2
3
3
3
3
2
4
6
3
3
3
6
6
3
3
3
3
3
3
3
3
33
39
28
16
25
22
23
23
21
27
39
29
29
28
36
32
36
38
37
44
46
480
480
480
480
480
600
600
600
600
600
624
768
768
768
768
864
960
1024
1024
1024
1200
10
3
9
1
1
1
1
37
1
1
1
3
3
1
1
1
1
1
2
1
1
Mac 13"mode
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16"mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
1152×864 (75Hz)
1280×960 (60Hz)
1280×1024 (60Hz)
1280×1024 (75Hz)
1280×1024 (85Hz)
1600×1200 (60Hz)
8.1
9.9
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S318/328W/TECHNICAl責
了 03.5.27 2:39 PM ページ 4
CONNECTION TO THE MOUSE CONTROL
Projector
Computer
ADB Mouse
1
2
1
ADB
(
)
2
3
4
POWER ON
DATA
RTS
3
4
5
6
7
+5V
GND
Mouse jack
Mini DIN 4-pin
CONTROL Terminal
D-sub 15-pin shrink jack
8
4
3
9
+5V
GND
1
2
10
11
12
13
14
15
Serial Mouse
Projector
Computer
1
2
3
4
5
1
2
3
4
5
6
7
8
9
CD
RD
TD
CONTROL Terminal
DTR
GND
DSR
RTS
CTS
RI
Mouse jack
D-sub 9-pin
SEL0
RTS
6
7
D-sub 15-pin shrink jack
8
9
1
2
3
4
5
10
11
12
13
14
15
GND
TD
8
9
6
7
USB Mouse
USB jack
(B type)
Projector
Computer
USB jack
(A type)
+
5V
1
1 +5V
2
1
—
DATA 2
—
DATA
2
3
4
+
+
DATA
DATA
3
4
1
2
3
4
GND
GND
3
4
USB cable
Projector
Computer
PS/2 Mouse
1
2
3
4
5
1
2
3
4
5
6
DATA
CLK
DATA
GND
+5V
CLK
Mouse jack
Mini DIN 6-pin
CONTROL Terminal
D-sub 15-pin shrink jack
SEL0
RTS
6
7
8
6
5
+5V
9
4
3
10
11
12
13
14
15
GND
2
1
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S318/328W/TECHNICAl責
了 03.5.27 2:39 PM ページ 5
RS-232C COMMUNICATION
(1) Turn off the projector and computer power supplies and connect with the RS-232C cable.
(2) Turn on the computer power supply and after the computer has started up, turn on the
projector power supply.
RS-232C jack
D-sub 9-pin
Projector
Computer
Control jack
D-sub 15-pin shrink jack
Communications setting
19200bps, 8N1
1 Protocol
Consist of header (7 bytes) + command data (6 bytes).
2 Header
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low : Lower byte of CRC flag for command data.
CRC_high : Upper byte of CRC flag for command data.
3 Command data
Command data chart
byte_0
byte_1
high
byte_2
byte_3
byte_4
low
byte_5
Action
Type
Setting code
low
low
high
high
Action (byte_0 - 1)
Action
Classification
Content
1
2
4
5
6
SET
GET
Change setting to desired value.
Read projector internal setup value.
Increment setup value by 1.
Decrement setup value by 1.
Run a command.
INCREMENT
DECREMENT
EXECUTE
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S318/328W/TECHNICAl責
了 03.5.27 2:39 PM ページ 6
RS-232C COMMUNICATION (continued)
Requesting projector status (Get command)
(1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)
+‘00H’+‘00H’) from the computer to the projector.
(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.
Changing the projector settings (Set command)
(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) +
setting code (2 bytes)) from the computer to the projector.
(2) The projector changes the setting based on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Using the projector default settings (Reset Command)
(1) The computer sends the default setting code Header + Command data (‘06H’+‘00H’+
type (2 bytes) +‘00H’+‘00H’) to the projector.
(2) The projector changes the specified setting to the default value.
(3) The projector returns the response code ‘06H’ to the computer.
Increasing the projector setting value (Increment command)
(1) The computer sends the increment code Header + Command data (‘04H’+‘00H’+
type (2 bytes) +‘00H’+‘00H’) to the projector.
(2) The projector in creases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Decreasing the projector setting value (Decrement command)
(1) The computer sends the decrement code Header + Command data (‘05H’+‘00H’+
type (2 bytes) +‘00H’ + ‘00H’) to the projector.
(2) The projector decreases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
When a command sent by the projector cannot be understood by the computer
When the command sent by the projector cannot be understood, the error command ‘15H’ is
returned by the computer. Some times, the projector ignores RS-232C commands during
other works. If the error command ‘15H’ is returned, please send the same command again.
When data sent by the projector cannot be practice
When the command sent by the projector cannot be practiced, the the error code ‘1cH’
+‘xxxxH’ is returned.
When the data length is greater than indicated by the data length code, the projector will
ignore the excess data code.
Conversely, when the data length is shorter than indicated by the data length code, an
error code will be returned to the projector.
NOTE • Operation cannot be guaranteed when the projector receives an
undefined command or data.
•
Provide an interval of at least 40ms between the response code and any other code.
• The projector outputs test data when the power supply is switched ON, and when the
lamp is lit. Ignore this data.
• Commands are not accepted during warm-up.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S318/328W/TECHNICAl責
了 03.5.27 2:39 PM ページ 7
Command data chart
Command data
Type Setting code
Names
Operation type
Header
CRC
Action
Blue
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00 CB D3 01 00 00 30
06 00 6B D0 01 00 00 30
06 00 9B D0 01 00 00 30
06 00 FB CA 01 00 00 30
06 00 FB E2 01 00 00 30
03 00
05 00
06 00
20 00
40 00
00 00
00 00
01 00
02 00
03 00
00 00
00 00
01 00
00 00
00 00
01 00
20 00
00 00
00 00
01 00
02 00
03 00
04 00
05 00
06 00
07 00
08 00
White
Black
MyScreen
ORIGNAL
Get
Set
Set
Blank Color
06 00
06 00 C7 D2 01 00 01 30
06 00 57 D3 01 00 01 30
06 00 A7 D3 01 00 01 30
08 D3
02 00 00 30
Normal
H Inverse
V lnverse
H&V Inverse
Get
Mirror
06 00
06 00
06 00
06 00
37 D2
F4 D2
83 D2
13 D3
01 00 01 30
02 00 01 30
01 00 02 30
01 00 02 30
Normal
Freeze
Set
Set
Freeze
Startup
Get
06 00 B0 D2 02 00 02 30
06 00 0B D2 01 00 04 30
06 00 9B D3 01 00 04 30
06 00 CB CB 01 00 04 30
ORIGNAL
OFF
MyScreen
Get
06 00
06 00
06 00
06 00
06 00
06 00
38 D2
F7 D3
67 D2
97 D2
07 D3
37 D1
02 00 04 30
01 00 05 30
01 00 05 30
01 00 05 30
01 00 05 30
01 00 05 30
English
Français
Deutsch
Español
Italiano
Norsk
06 00 A7 D0 01 00 05 30
06 00 57 D0 01 00 05 30
06 00 C7 D1 01 00 05 30
06 00 37 D4 01 00 05 30
06 00 A7 D5 01 00 05 30
06 00 57 D5 01 00 05 30
Set
Language
Nederlands
Português
日本語
BE EF
03
09 00
中文
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
0A 00
00 00
00 00
00 00
00 00
00 00
Get
Get
06 00 C4 D3 02 00 05 30
06 00 7C D2 02 00 07 30
06 00 1A D2 04 00 07 30
06 00 CB D3 05 00 07 30
Magnify
Auto off
Increment
Decrement
Get
06 00
06 00
06 00
08 86
6E 86
BF 87
02 00 10 31
04 00 10 31
05 00 10 31
Increment
Decrement
BE EF
BE EF
03
03
00 00
00 00
Brightness
Reset
Execute
Execute
Execute
BE EF
BE EF
BE EF
03
03
03
06 00
58 D3
06 00 00 70
00 00
00 00
00 00
Contrast Reset
06 00 A4 D2 06 00 01 70
06 00 E0 D2 06 00 02 70
V.Position
Reset
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S318/328W/TECHNICAl責
了 03.5.27 2:39 PM ページ 8
Command data chart (continued)
Command data
Action Type Setting code
Names
Operation type
Header
CRC
IC D3
68 D2
H.Position Reset
H.Size Reset
Execute
Execute
BE EF
BE EF
03
03
06 00
06 00
06 00 03 70
06 00 04 70
00 00
00 00
Color Balance
R Reset
Execute
Execute
BE EF
BE EF
03
03
06 00
94 D3
06 00 05 70
00 00
00 00
Color Balance
B Reset
06 00 D0 D3 06 00 06 70
06 00 C4 D0 06 00 09 70
Sharpness Reset
Color Reset
Execute
Execute
Execute
Execute
Execute
Execute
Execute
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
00 00
00 00
00 00
00 00
00 00
00 00
00 00
06 00
80 D0
06 00 0A 70
Tint Reset
06 00 7C D1 06 00 0B 70
Keystone_V Reset
Keystone_H Reset
Auto Adjust
06 00
06 00
06 00
08 D0
98 D8
91 D0
06 00 0C 70
06 00 20 70
06 00 0A 20
Lamp Time Reset
06 00 58 DC 06 00 30 70
06 00 98 C6 06 00 40 70
Filter Time Reset
Execute
off
BE EF
03
00 00
BE EF
BE EF
BE EF
BE EF
03
03
03
03
06 00 FB D8 01 00 20 30
06 00 6B D9 01 00 20 30
06 00 C8 D8 02 00 20 30
06 00 D9 D8 02 00 20 60
00 00
01 00
00 00
00 00
Set
Blank on/off
on
Get
Get
(Example of Return)
00 00 01 00
(Normal) (Cover-error)
02 00
(Fan-error)
03 00
(Lamp-error)
Error Status
Power
04 00 05 00
(Temp-error) (Air flow-error) (Lamp-Time-over) (Cool-error) (Filter-Error)
06 00
07 00
0800
OFF
ON
BE EF
BE EF
BE EF
03
03
03
06 00 2A D3 01 00 00 60
06 00 BA D2 01 00 00 60
00 00
01 00
00 00
Set
Set
Get
06 00
19 D3
02 00 00 60
RGB1
RGB2
Video
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
06 00 FE D2 01 00 00 20
06 00 3E D0 01 00 00 20
06 00 6E D3 01 00 00 20
06 00 9E D3 01 00 00 20
06 00 AE D1 01 00 00 20
06 00 CD D2 02 00 00 20
00 00
04 00
01 00
02 00
05 00
00 00
00 00
00 00
Input Source
SVideo
Component
Get
Get
06 00
06 00
06 00
31 D3
57 D3
86 D2
02 00 01 20
04 00 01 20
05 00 01 20
Increment
Volume
Mute
Decrement
Normal
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
00 00
00 00
01 00
00 00
00 00
00 00
00 00
06 00
46 D3
01 00 02 20
Set
Mute
Get
06 00 D6 D2 01 00 02 20
06 00
06 00
75 D3
89 D2
02 00 02 20
02 00 03 20
Get
Increment
Decrement
06 00 EF D2 04 00 03 20
06 00 3E D3 05 00 03 20
Brightness
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S318/328W/TECHNICAl責
了 03.5.27 2:39 PM ページ 9
Command data
Type Setting code
Names
Operation type
Header
CRC
Action
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
06 00 FD D3 02 00 04 20
06 00 9B D3 04 00 04 20
06 00 4A D2 05 00 04 20
00 00
00 00
00 00
00 00
00 00
00 00
Contrast
Increment
Decrement
Get
06 00
06 00
01 D2
67 D2
02 00 05 20
04 00 05 20
Color Balance R
Increment
Decrement
06 00 B6 D3 05 00 05 20
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
06 00
06 00
06 00
45 D2
23 D2
F2 D3
02 00 06 20
04 00 06 20
05 00 06 20
00 00
00 00
00 00
00 00
00 00
00 00
Color Balance B
Keystone_V
Increment
Decrement
Get
06 00 B9 D3 02 00 07 20
06 00 DF D3 04 00 07 20
06 00 0E D2 05 00 07 20
Increment
Decrement
Get
Increment
Decrement
4:3
BE EF
BE EF
BE EF
03
03
03
06 00 E9 D0 02 00 0B 20
00 00
00 00
00 00
06 00
8F D0
04 00 0B 20
Keystone_H
Aspect
06 00 5E D1 05 00 0B 20
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00 9E D0 01 00 08 20
06 00 0E D1 01 00 08 20
06 00 FE D1 01 00 08 20
06 00 AD D0 02 00 08 20
00 00
01 00
02 00
00 00
00 00
01 00
02 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
Set
16:9
Small
Get
Default
Bottom
Top
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
62 D1
F2 D0
02 D0
51 D1
0D 83
6B 83
BA 82
F1 82
97 82
46 83
01 00 09 20
01 00 09 20
01 00 09 20
02 00 09 20
02 00 00 21
04 00 00 21
05 00 00 21
02 00 01 21
04 00 01 21
05 00 01 21
Picture
Position at
16 : 9 or Small
Set
Get
Get
V.Position
H.Position
Increment
Decrement
Get
Increment
Decrement
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
B5 82
D3 82
02 83
49 83
2F 83
FE 82
02 00 02 21
04 00 02 21
05 00 02 21
02 00 03 21
04 00 03 21
05 00 03 21
00 00
00 00
00 00
00 00
00 00
00 00
H.Size
Increment
Decrement
Get
H.Phase
Increment
Decrement
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
F1 72
97 72
46 73
B5 72
D3 72
02 73
02 00 01 22
04 00 01 22
05 00 01 22
02 00 02 22
04 00 02 22
05 00 02 22
00 00
00 00
00 00
00 00
00 00
00 00
Sharpness
Color
Increment
Decrement
Get
Increment
Decrement
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CP-S318/328W/TECHNICAl責
了 03.5.27 2:39 PM ページ 10
Command data chart (continued)
Command data
Action Type Setting code
Names
Operation type
Header
CRC
Get
Increment
Decrement
Auto
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
49 73
2F 73
FE 72
9E 75
FE 71
6E 70
6E 75
5E 72
FE 74
0E 71
0D 73
F2 73
62 72
C1 73
02 00 03 22
04 00 03 22
05 00 03 22
01 00 00 22
01 00 00 22
01 00 00 22
01 00 00 22
01 00 00 22
01 00 00 22
01 00 00 22
02 00 00 22
01 00 05 22
01 00 05 22
02 00 05 22
00 00
00 00
00 00
0A 00
04 00
05 00
09 00
02 00
08 00
07 00
00 00
00 00
01 00
00 00
01 00
00 00
00 00
00 00
01 00
00 00
00 00
01 00
02 00
00 00
02 00
01 00
00 00
00 00
00 00
01 00
03 00
00 00
01 00
00 00
00 00
Tint
NTSC
PAL
Set
SECAM
NTSC 4.43
M-PAL
N-PAL
Get
Video Format
1080i
1035i
Get
Set
Set
Set
HDTV
off
06 00 CB D0 01 00 08 30
06 00 5B D1 01 00 08 30
Sync on G
WHISPER
on
Get
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
68 D1
3B 23
AB 22
08 23
C7 F0
57 F1
A7 F1
F4 F0
C2 71
32 71
A2 70
91 70
02 00 08 30
01 00 00 33
01 00 00 33
02 00 00 33
01 00 A1 30
01 00 A1 30
01 00 A1 30
02 00 A1 30
01 00 09 22
01 00 09 22
01 00 09 22
02 00 09 22
01 00 12 30
NORMAL
WHISPER
Get
NORMAL
CINEMA
DYNAMIC
Get
Set
Set
GAMMA
Large
Middle
Small
Get
Over Scan
Full
43 D6
Set
Set
MyScreen Size
MyScreen Lock
X1
06 00 D3 D7 01 00 12 30
06 00 70 D6 02 00 12 30
Get
off
06 00 3B EF 01 00 C0 30
06 00 AB EE 01 00 C0 30
on
Get
06 00
06 00 C2 FF 02 00 90 10
06 00 C2 F0 02 00 A0 10
08 EF
02 00 C0 30
Lamp Time
Filter Time
Get
Get
BE EF
03
00 00
10
Download from Www.Somanuals.com. All Manuals Search And Download.
REGULATORY- NOTICES 03.5.27 2:23 PM ページ 1
REGULATORY NOTICES
FCC Statement Warning
WARNING: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
INSTRUCTIONS TO USERS: This equipment complies with the requirements
of FCC (Federal Communication Commission) equipment provided that the
following conditions are met.
The cables may have to be used with the core set to the projector side. Use
the cables which are included with the projector or specified.
ST
AND
BY/ON
INPU
LA
N
T
P
KEYSTO
NE
TENP
R
PO
W
E
RESET
Core
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
For the Customers in CANADA
NOTICE: This Class B digital apparatus complies with Canadian ICES-003.
Pour les utilisateurs au Canada
AVIS: Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du
Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
Boxlight (“Boxlight”) warrants that each Boxlight CP-322i (“the Product”) sold hereunder will conform to and function
in accordance with the written specifications of Boxlight. Said limited warranty shall apply only to the first person or
entity that purchases the Product for personal or business use and not for the purpose of distribution or resale. Said
warranty shall continue for a period of two (2) years from the date of such purchase. The standard limited warranty
excludes the lamps in projectors after 120 days or 500 hours (whichever comes first) and the accessories after one year.
Boxlight does not warrant that the Product will meet the specific requirements of the first person or entity that purchases
the Product for personal or business use. Boxlight’s liability for the breach of the foregoing limited warranty is limited to
the repair or replacement of the Product or refund of the purchase price of the Product, at Boxlight’s sole option.
Replacement Product may be re-furbished in “like-new” condition, at Boxlight’s sole discretion. To exercise the
Purchaser’s rights under the foregoing warranty, the Product must be returned at the Purchaser’s sole cost and expense, to
Boxlight or to any authorized Boxlight service center, and the Product must be accompanied by a written letter explaining
the problem and which includes (i) proof of date of purchase; (ii) the dealer’s name; and (iii) the model and serial number
of the Product. When sending your unit in for repair, please ship your unit in its original packing material or a Boxlight
approved ATA Shipping Case, or have a professional packaging company pack the unit. Please insure your shipment for
its full value. A return authorization number, issued by the Boxlight Customer Service department, must also be
clearly displayed on the outside of the shipping carton containing the Product.
WARRANTY LIMITATION AND EXCLUSION
Boxlight shall have no further obligation under the foregoing limited warranty if the Product has been damaged due to
abuse, misuse, neglect, accident, unusual physical or electrical stress (unusual physical and electrical stress includes
unusually long operation, exposure to smoke and other airborne contaminants), unauthorized modifications, tampering,
alterations, or service other than by Boxlight or its authorized agents, causes other than from ordinary use or failure to
properly use the Product in the application for which said Product is intended.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISCLAIMER OF UNSTATED WARRANTIES
THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE FACE HEREOF AND THE FOREGOING
WARRANTY SHALL NOT BE EXTENDED, ALTERED OR VARIED EXCEPT BY WRITTEN INSTRUMENT
SIGNED BY BOXLIGHT. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO YOU.
LIMITATION OF LIABILITY
IT IS UNDERSTOOD AND AGREED THAT BOXLIGHT’S LIABILITY WHETHER IN CONTRACT, IN TORT,
UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE RETURN OF THE
AMOUNT OF THE PURCHASE PRICE PAID BY PURCHASER AND UNDER NO CIRCUMSTANCES SHALL
BOXLIGHT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST PROFITS, LOST
REVENUES OR LOST SAVINGS. THE PRICE STATED FOR THE PRODUCT IS A CONSIDERATION IN
LIMITING BOXLIGHT’S LIABILITY. NO ACTION, REGARDLESS OF FORM, ARISING OUT OF THE
AGREEMENT TO PURCHASE THE PRODUCT MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR
AFTER THE CAUSE OF ACTION HAS ACCRUED. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
Boxlight Corporation
19332 Powder Hill Place
Poulsbo, WA 98370-7407 USA
USA and Canada 800.762.5757
International +1.360.779.7901
Download from Www.Somanuals.com. All Manuals Search And Download.
|