|
AXIS 2130R PTZ Network Camera
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Tripod Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Ceiling Mounting the AXIS 2130R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Before connecting the hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting the hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Accessing the AXIS 2130 from a browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
The Administration Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the Wizards to Design your Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
General Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Dynamic IP Address Notification Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Reinstating the Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Accessing your Surveillance Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Positional Control of the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Appendix A - Other IP Setup Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
The AXIS IP Installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Appendix B - Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
PINGing Your IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Symptoms, Possible Causes and Remedial Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Appendix C - Updating the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Appendix D - Customizing The Video Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Modifying the File System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Configuring using FTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Custom Web Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Appendix E - The I/O Terminal Block Connector . . . . . . . . . . . . . . . . . . . . . . . . . 34
Schematic Connection Diagram of the I/O Connector . . . . . . . . . . . . . . . . . . . . . . . . . 35
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Controlling and Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Appendix F - Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Product Overview
5
Product Overview
The AXIS 2130 PTZ Network Camera is a combined Network Camera and Pan/Tilt/Zoom
device. It plugs directly into an Ethernet network and delivers clear and sharp surveillance
images to any browser on the network.
The AXIS 2130 includes its own, built-in Web
server that enhances traditional surveillance
systems by distributing monitored images over a
secure intranet network. The unit’s
Pan/Tilt/Zoom functions are controlled directly
from the browser window, as are all of the other
available configuration options. All that is
required is a standard browser such as Netscape
Navigator or Microsoft Internet Explorer.
The AXIS 2130 is supplied in the following
variants:
• The AXIS 2130 PTZ Network Camera - Connecting
directly to Ethernet or Fast Ethernet networks,
the AXIS 2130 is designed for conventional mounting on horizontal surfaces.
• The AXIS 2130R PTZ Network Camera has the same features and capabilities as the AXIS 2130,
but is designed for ceiling mounting only. The degree of pan and tilt is different to that of the
AXIS 2130 - please see the technical specifications on page 37 for full details.
The Web-based interface in both models features several user-friendly Wizards that
simplify the installation process and provide for a seamless integration into your
networking environment and custom applications. The open-network structure minimizes
the need for costly coax cabling, to offer remote imaging over the network for a minimal
connection overhead.
The AXIS 2130/2130R is the smart and cost-effective solution for meeting the
sophisticated demands expected of a modern interactive surveillance and remote
monitoring system. It is simple to install - and easy to use!
Features and Benefits
Ease of Use - The AXIS 2130/2130R has Plug-and-Watch functionality; which means that
all you need do before using the product is connect it to your network and assign it a valid
IP address. The only software needed for viewing images or configuring the product is
Microsoft Internet Explorer 4.x (used with Axis’ ActiveX component), or Netscape 4.x or
above. No other software required.
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
AXIS 2130/2130R User’s Manual
6
Cost-effective - Provides image distribution over your network for a minimal connection
overhead and offers a reliable and low-cost resource for remote network imaging. There
are no hidden accessory costs involved; such as expensive software, management
workstations, or dedicated video cabling.
Open Standards Environment - Supporting TCP/IP networking, SMTP e-mail, HTTP and other
Internet-related protocols, the AXIS 2130/2130R can be used in mixed operating system
environments; such as Windows and UNIX.
Simple Administration - Using a standard Web browser, you configure and manage the AXIS
2130/2130R directly from its own Web pages. When a new firmware release becomes
available, you simply upgrade your AXIS 2130/2130R remotely over the network.
Standard Image Format - The AXIS 2130/2130R generates high-quality pictures in standard
JPEG format that can be viewed using any standard Web browser.
Picture Updating - The on-board ETRAX 100 LX processor and revolutionary AXIS
ARTPEC-1 Real Time Picture Encoder provide an amazing power-synergy to deliver up to
30 frames over 10Mbps or 100Mbps networks.
Wide Range of Applications - The AXIS 2130/2130R offers live video over the network for
extending and enhancing any traditional CCTV system. Use it for verifying intruder
alarms; for traffic surveillance; banking applications; remote monitoring of parking lots,
buildings and factories; industrial process control; visual security; image archiving... and
much more besides! The SMTP e-mail support also allows images to be sent as e-mail
attachments, or identified within an e-mail, using a hypertext link to any target server on
your network.
External Device Connection - Supporting an auxiliary Input/Output Connector, you can
connect your AXIS 2130/2130R to a variety of external devices; such as IR-sensors,
switches and alarm relays.
Security - The AXIS 2130/2130R provides multi-user password protection, so that access
can be limited to specified individuals or groups.
Linux Operating System - Including a Boa Web server, the Linux operating system provides a
stable platform for open-source development in future releases of the product. In
accordance with the GNU General Public License, Axis have published the kernel for this
Boa; and Larry Doolittle, who is now enhancing and maintaining this free program
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Product Description
7
Product Description
Read the following information to familiarize yourself with the AXIS 2130/2130R, making
particular note of where the connectors and indicators are located.
Front
Power Indicator
The power indicator flashes green during power-up and
shows a steady green during normal operation.
Rear Panel
I/O Terminal Block
The I/O Terminal Block connector provides the physical interface to
one relay switch output and one digital opto-coupled input. This
connector is used for receiving external triggers and for controlling
output devices.
Network Connector
The AXIS 2130/2130R is designed for 10 Mbps Ethernet and
100 Mbps Fast Ethernet networks and connects to the net-
work via a standard RJ45 connector. Supporting NWAY, the
AXIS 2130/2130R detects the speed of the local network
segment and varies the speed of data communication
accordingly (between 10 Mbps and 100 Mbps).
Network Indicator
After completion of the startup and self test routines, the multi-colored
Network Indicator provides the following indications:
Power Supply Connector
A single Jack socket for connection of
the AXIS 2130/2130R power supply
(Canon K30120).
•
•
•
flashing yellow - indicates activity on a 10Mbps Ethernet network
flashing green - indicates activity on a 100Mbps Fast Ethernet network
steady orange - disconnected from the network.
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Description
AXIS 2130/2130R User’s Manual
8
Tripod Mounting
The AXIS 2130 is supplied with a screw hole for tripod mounting. The screw hole is located
on the base of the unit, as shown below. The base plate of the AXIS 2130R is similar, but is
supplied with a ceiling mounting plate instead of the tripod screw hole.
Tripod Screw Hole
The serial number is used for setting
the product’s IP address.
Reset Button
Press to restore the factory default
settings.
Serial Number
The serial number is used for setting
the product’s IP address.
Ceiling Mounting the AXIS 2130R
The AXIS 2130R is designed exclusively for ceiling mounting and a special mounting plate
is supplied for the purpose. Screw the plate (screws not supplied) to the ceiling at the point
of installation.
Screw holes for ceiling
mounting
WARNING!
When installing the AXIS 2130R on the
ceiling, check that the ceiling is strong
enough to bear the weight of the cam-
era plus the mounting plate. A weak
fitting could result in the camera fall-
ing and causing serious injury.
Check for looseness in the camera
installation mount at least once a year.
Mounting Plate Information
Distance between screw holes - 120mm (418/25 in.)
Screw hole diameter: 6mm (1/4 in.)
Plate thickness: 1.6 mm (1/16 in.)
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Installation
9
Installation
•
•
Quick installation - Follow the instructions below to quickly install on an Ethernet network.
Easy installation - See The AXIS IP Installer, on page 24.
Before connecting the hardware
1. Note the serial number on the underside of the unit. You need to know this
to set the IP address. The 12-digit serial number is the same as the Ethernet
address, e.g. Ser.No: 00408C1A2B3C = Ethernet Address:
00-40-8c-1A-2B-3C
2. From a computer on your network, assign your AXIS 2130 with a unique IP address using the
appropriate method for your operating system.
Windows only - Start a Command Prompt and type these commands:
UNIX only - Type this in your command line:
Syntax:
Syntax:
arp -s <Server IP address> <Ethernet address> <my PC IP address>
ping -t <Server IP address>
arp -s <IP address> <Ethernet address> temp
ping <IP address>
Example:
Example:
arp -s 172.21.1.200 00-40-8c-10-00-86 172.21.1.193
ping -t 172.21.1.200
arp -s 172.21.1.200 00:40:8c:10:00:86 temp
ping 172.21.1.200
Note:
In some Unix systems, the ARP command can be located in a directory that is not on the
command path. Administrator rights may be required.
Connecting the hardware
1. Connect an Ethernet cable to the
Ethernet connector and attach it to the
network.
Ethernet
Connector
2. Connect the power cable to the power
supply connector and connect it to the
main power supply.
Network
Indicator
3. Ensure that the Power Indicator
(on the front panel) is permanently lit
and that the Network Indicator
flashes intermittently.
Terminal connector
Power supply
4. Approximately 10-15 seconds after connecting the power supply, the following message (or
similar) is returned:‘Reply from 172.21.1.200’
5. Exit Ping.
The initial installation is complete. You can now access the AXIS 2130 directly from your
browser, as described below.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
AXIS 2130/2130R User’s Manual
10
Accessing the AXIS 2130 from a browser
Start your browser (e.g. Internet Explorer or Netscape) and enter the IP address of the
AXIS 2130 in the location/address field.
❶Enter the IP address of the AXIS 2130/2130R in
the location/address field.
❶Click the Admin button.
❷Click the Installation Wizard. The wizard guides you
through the basic setup of your Video Server. Click the
Help button for a short description of each setting.
The Application Wizard can be used to configure the
server to upload images
Important!
•
Upon delivery, the AXIS 2130 is configured for open access (anonymous users). The unit is supplied with
one pre-configured Administrator user name and password, set to root and pass, respectively. The Admin-
istrator password should be changed as soon as possible, to prevent unauthorized access to the Admin
Tools and/or product images. Change the password in Admin>General Settings>Security.
To enable the updating of images in Microsoft Internet Explorer, set your browser to allow ActiveX con-
trols and perform a once-only installation of Axis' ActiveX component onto your workstation. If your
working environment restricts or prohibits the downloading of additional software components, you can
alternatively, from the Image Settings, configure your AXIS 2130 to use a Java applet for updating the
images. Refer to the online Help for more information.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Configuration
11
Configuration
This section describes how to configure the AXIS 2130/2130R and is intended specifically
for product Administrators – who have high-level privileges denied to ordinary users.
The AXIS 2130/2130R is configured from a standard browser (Netscape Navigator 4.x or
Important!
To access the AXIS 2130/2130R admin tools, you must first set the IP address, as described in Installa-
tion, on page 9.
The Administration Tools
The Web-based Administration tools are displayed in an intuitive graphical user interface
that allows simple point-and-click system configuration.
Tip!
On-line help is available on every page of the AXIS 2130/2130R web interface. This
information is useful when configuring the unit and should be used as a first point of
reference for resolving any queries. The help system is stored internally in the unit.
Accessing the Tools
Follow the instructions below to access the Administration Tools from a browser:
1. Start your browser and enter the IP address of the AXIS 2130/2130R in the
location/address field.
Example!
2. The main Application page is now displayed. Click the Admin button to
display the Administration Overview page and the Administration Tools.
3. The server’s various settings are reached by clicking on the relevant button.
Important!
Administrators can choose not to display the Administration and other navigational buttons from the
user interface. Selecting this feature ultimately means that the Administration tools can then only be
accessed by entering the full Admin address into the browser’s URL field; for example:
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
AXIS 2130/2130R User’s Manual
12
Admin Tools - Overview
The Administration Tools provide access to the following tools and parameters:
Sets all of the parameters required for securely viewing images directly in a browser;
including: TCP/IP (Network), Date/Time, and System Security settings.
Installation Wizard
Use the Application Wizard for developing the following applications:
Application Wizard
•
•
•
transmitting images to a remote server on your network
sending e-mails with embedded images, or links to recorded video streams
developing alarm or time-based image applications
Set the system date & time,
manually or automatically.
Date and Time
Security
Layout
Define the user name and password
for administratrors and users.
Choose your default viewer and personal settings.
These 4 buttons show various
product information.
Set camera parameters to the factory default values.
Restart the camera.
Network
Specify settings for the supported network protocols; TCP/IP, DNS
and SMTP (E-Mail).
Dynamic IP Address
Notification
Set up IP address notification so that you will be
notified if the IP address for the camera changes.
Image settings
Preset Positions
Set the image features; such as: displaying text, clock, color, Black
& White etc. Flicker reduction is also available from here.
Create and recall Pan/Tilt/Zoom preset
conditions
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Configuration
13
Using the Wizards to Design your Application
Click the Admin button and use the Wizards (described below) to quickly establish the
necessary parameters for your application:
Wizard
Parameters / Options
Description
Installation Wizard
Users
Define or edit the Administrator password (the Administrator user name is
permanently set to root, and the default password is set to pass), or define,
add and delete user names and passwords.
Sets all of the parameters
required for securely
viewing images directly in a
browser.
TCP/IP
Specify the IP address for your AXIS 2130/2130R. If you intend to use DNS
names, specify the Domain Name and the IP addresses for the primary and
secondary DNS servers. You may also optionally specify a Host Name for
the AXIS 2130/2130R. There are also options for restricting the network
bandwidth usage, for selecting the appropriate media and for changing
the HTTP port number.
Date and Time
Image Settings
Synchronize the internal clock of the AXIS 2130/2130R. This can be done
manually or automatically, from an NTP server or your computer clock.
There is also an option that automatically adjusts the time for daylight
saving.
Display the date and time and your own text in the image. Select
monochrome or color images, and set the resolution and compression for
the images. Remember: the higher the quality of the images - the greater
the file sizes and the network bandwidth requirements.
Application Wizard
Upload
Define how and when your images will be transmitted, by choosing to
either:
Use this wizard to develop
applications for:
•
•
upload images continuously, or
•
•
transmitting images to
a remote server on your
network
upload images only when an alarm event occurs.
Alarms, buffers,
and destination
Depending upon the choice of application made above, continue with the
wizard to define:
sending e-mails with
embedded images or
links to recorded video
streams, and/or devel-
oping alarm or
•
•
•
•
•
digital input alarm conditioning
pre- and post-alarm buffer settings
the network protocol to use for upload
the e-mail recipient, subject and own text
FTP path name and security settings (if used)
time-based image
applications
Refer to the appropriate settings page for full details on each of the above
parameters.
Tip!
Having used the Wizards for initially configuring your application, refer to the on-line Help and use the
Administration Tools for refining the application to meet your specific requirements.
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
AXIS 2130/2130R User’s Manual
14
General Settings
Click the General Settings button to display and/or edit the following settings:
Date and Time
Click this icon to set the date and time, automatically, or manually. Automatic setting of
the date and time requires you to either synchronize the time with that on your computer
or, alternatively, to provide the IP address of an NTP server. To automatically adjust the
time to reflect changes made by daylight saving, check the box provided. Click Save to
register the settings.
Security
To prevent unauthorized use of the camera, access is password-protected and restricted to
defined Users and Administrators. Administrators have unrestricted access to the
Administration Tools and can determine the registration of all other users.
As an Administrator, click the Security icon to either:
• define or edit the Administrator password (the Administrator user name is permanently set to
root, with the default password set to pass)
• configure, add or delete user names and passwords
Important!
Upon delivery, the AXIS 2130/2130R is configured for open access (anonymous users), with one
pre-configured Administrator user name and password, set to root and pass, respectively. The Adminis-
trator password should always be changed, to prevent unauthorized access to the Admin Tools and/or
product images. Furthermore, all Axis products are supplied with these defaults.
By default, the AXIS 2130/2130R supports anonymous user access, which means that
anybody on the network has access to the video images and Admin Tools from a browser.
Entering at least one user name and password for an authorized user in the Security page
will disable anonymous access, and thereafter only allow defined users. If the anonymous
user service is satisfactory for your application, do not add any users. The Administrator
password should, however, still be changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Configuration
15
Layout Settings
Using the Layout settings, you can define your default viewer for Internet Explorer
and enable a wide range of personal features for inclusion on the product’s Home Page.
Default viewer for Internet Explorer
To enable the updating of images in Microsoft Internet Explorer, you must set your
browser to allow ActiveX controls and perform a once-only installation of the Axis
ActiveX component onto your workstation. If your computer restricts the downloading of
additional software components, you can instead configure your AXIS 2130/2130R to use
a Java applet for updating the images. Click the appropriate radio button for your choice
and then click OK.
Personal Settings
Many of the features on the Home page can be customized. For example, you can quickly
change the background color and include your corporate logo by clicking the appropriate
radio buttons and providing the appropriate URL for any given object.
Refer to the on-line help for more information on personal settings.
Caution!
Unchecking the Show Admin box removes the Admin button from the product Home Page, and effec-
tively means that the Administration Tools can then only be accessed by entering the full Admin address
View Parameter List
The Parameter List provides a comprehensive list of all of the system parameters and their
current settings. Click View Parameter List to display the list.
System messages are recorded in a single log file and stored in product memory.
Consequently, the file can be used for examining system events. The log file also serves as
a useful diagnostic tool when attempting to resolve any problem that might occur. See also
Troubleshooting, on page 25.
To display the latest server messages since the last Restart of the system, click the View
Log File button.
View Server Report
This button shows important information about the server status and settings.
View Release Notes
This button opens a window showing the release notes for the installed firmware.
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
AXIS 2130/2130R User’s Manual
16
Emergency Actions
In certain circumstances, it may be necessary to reinstate the Factory Default settings for
your AXIS 2130. This is performed in one of two ways:
Default Router and the Mac (Ethernet) address.
• By pressing the Reset Button, located on the underside of the unit. This option will reset
ALL the parameters currently configured in the unit. To reset the unit using the reset
button, please see Reinstating the Factory Default Settings, on page 20.
Network Settings
Click the Network Settings button to display, edit and refine the settings for:
• TCP/IP - used by the camera for transmitting data over the network.
• DNS (Domain Name System) - the network service used by the product for translating
domain names into IP addresses.
• SMTP (E-mail) - this is the protocol for sending e-mail messages between mail servers on the
network.
Configure the Network Settings with reference to the on-line help and the table below:
TCP/IP Parameters
DHCP
BOOTP
Description
Enable DHCP to allow centralized assignation of IP addresses. Requires a DHCP server on the network.
Enable the BOOTP protocol for setting the IP address automatically. For further information on using
BOOTP, see Other IP Setup Methods, on page 23. If you intend to use the AXIS IP Installer, BOOTP must be
enabled.
IP address
Specifies the unique 32-bit IP address of your unit.
Default Router
Subnet Mask
Host Name
Specifies the network router your video server will use.
If unsure what value to use, contact your system administrator.
If you are using a DNS server on your network (see below), this is usually the same as the assigned DNS
Name.
DNS Parameters
Domain Name
Primary DNS
Description
Enter the name of the domain your AXIS 2130 belongs to.
Defines the IP address of the primary DNS server. This is used for identifying a computer by name instead
of IP address.
Secondary DNS
The IP address of the secondary DNS server. This will be used if the primary DNS server is unavailable.
SMTP Parameters
Description
Primary Mail Server
Defines the server that provides your mail facilities.
Secondary Mail Server Defines a secondary server that can provide mail facilities in the event of the primary server being
unavailable.
Return Email Address
The reply address for e-mails sent by the AXIS 2130; that is, the name that will appear in the ‘From’ field
of the dispatched email.
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Configuration
17
Miscellaneous
Description
Select Media
This does not normally need to be changed, but if you have specific needs - due to the use of network
switches or similar equipment, select the type of network media here.
Max Bandwidth
With the default set to unlimited, this parameter defines a restriction on the network bandwidth used by
the camera; particularly useful for a connection to a busy network.
HTTP Port Number
This does not normally need to be changed, but can be, if you have particular requirements.
DHCP
DHCP (Dynamic Host Configuration Protocol) is a protocol that lets network administrators
centrally manage and automate the assignment of IP addresses in an organization's
network.
Important!
DHCP should only be enabled if you know which IP address the AXIS 2130/2130R will get from the DHCP
server, or if your version of DHCP can update a DNS server, which then allows you to access the AXIS
2130/2130R by name. If DHCP is enabled and you cannot access the unit, you may have to reset it to the
factory default settings (see page 20) and then perform the installation again (see page 9).
Dynamic IP Address Notification Settings
When the IP address changes by means beyond your control, such as by DHCP or PPP, you
can choose to be notified of the change via HTTP, FTP or SMTP. Click the icon to display,
edit and refine the settings for address notification.
Referring to the on-line help and the table below, configure the dynamic IP address
notification settings.
Parameter
HTTP
Description
Enabling HTTP means the server will send an HTTP GET request to the specified URL. This can then easily
be taken care of by a designated cgi-script, which registers the request by some means. Custom
parameters can be used by entering them in the field provided. The fields User Name and Password,
(located directly below the field for Custom Parameters) should be used if the script is password
protected. If you need to pass a proxy server to connect to the URL for the host, provide your user
information in the relevant fields. See also the On-line help for more information.
SMTP
FTP
Enabling SMTP will send an email notification of any change in IP address. Enter the recipient’s address
and a sender’s address, as well as any text you want to appear in the subject of the email. Note that you
must configure a mail server under Network Settings. See also the On-line help for more information.
Saves a notification file on an FTP server. Provide the connection details for the server and your user name
and password. If there is a firewall between the server and the FTP server, it is recommended that Passive
Mode is enabled. There are 3 levels of TXT Type to choose from; Short - the IP address only; Extended -
multi-line file; and HTML - contains the same information as Extended, but includes HTML tags. See also
the On-line help for more information.
TXT Field
Specify your own text to include in the notification. This text is included in notifications sent by all of the
above methods.
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
AXIS 2130/2130R User’s Manual
18
Video Settings
Click the Image Settings
button to configure the image settings to your
requirements.
Header
Description
Date & time
Text
Check to enable time display in the video source.
Enable or disable the display of a text string in the video image. Type the text string that
you want to display in the adjacent field.
Image
Color
Display Color or Black and White video images.
Resolution
Compression
Set the required resolution for your images.
Determines the compression factor (0-100) for the selected video source. Lower
compression optimizes picture quality, but generates larger image file sizes, requiring
greater network bandwidth and storage space.
Flicker reduction
Description
Enable
When fluorescent lighting at 50 Hz is used to illuminate the scene displayed in the image
from the camera, there may be an irritating flicker present in the image. This can be reduced
by checking the Enable box.
Notes: •Image control can also be achieved directly using CGI parameters in the image URL.
•Using CGI parameters embedded in a URL request will temporarily override any parameters
defined in the Image Settings dialog. For detailed CGI information, refer to the Axis Camera API,
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Configuration
19
Preset Positions
To enable quick and accurate camera PTZ positioning to known camera hotspots, the
Administrator can set any camera position as a named entity - creating up to forty Preset
Positions that can be used at any time from the drop-down list on the Live View page.
Defining Preset Positions
The camera’s orientation is controlled by Pan Tilt and Zoom control bars. Follow the
instructions below to create a preset position:
1. Click the Preset Position button. An image from the camera is displayed in a new
window.
Current
position
Save as
Home
Home
button
2. By clicking in the image or by using the Pan Tilt and Zoom control bars, move the
camera to the desired position.
3. Enter a descriptive name in the Current Position field.
4. Click Save to register the new preset position with the AXIS 2130/2130R and then
check that the new name is included in the Preset Positions drop-down list. You can
alternatively choose to save the position as a new Home position. Click Remove to
remove this or any other preset position in the list.
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
AXIS 2130/2130R User’s Manual
20
Reinstating the Factory Default Settings
In certain circumstances, it may be necessary to reinstate the Factory Default settings for
your AXIS 2130/2130R. This is performed by clicking the appropriate button within the
Administration Tools, or by using the Reset Button.
Follow the instructions below to reinstate the product factory default settings using the
Reset Button on the underside of the unit:
2. Keep the button pressed for at least five seconds and then release it.
Note:
Reinstating the factory default settings with the aid of the Reset Button will cause all param-
eters (including the IP address) to be reset. Refer to Installation, on page 9, or Other IP Setup
Methods, on page 23, for information on how to set the IP address. To reset to the factory
default settings, but with certain parameters saved, reset instead with the help of the button
provided in the General Settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Using the AXIS 2130 PTZ Network
21
Using the AXIS 2130 PTZ Network Camera
This section is intended specifically for system Users; that is, personnel responsible for
using the AXIS 2130/2130R as part of an integrated surveillance system.
Important!
•
Your system Administrator has installed the AXIS 2130/2130R on your computer network, and tai-
lored the user functions and general look and feel of the system to meet your specific surveillance
needs. Consequently, some of the functions and examples provided within the section may differ
from those displayed in your system.
•
•
Any deficiencies or shortcomings in your application should be referred to the system administrator,
who has high-level privileges that are normally denied to ordinary users.
On-line help
may not be available from the user interface, as access to this information may be
denied by your system administrator.
Accessing your Surveillance Images
The AXIS 2130/2130R can be used with many operating systems; e.g. Windows, Linux,
and UNIX. You can access the AXIS 2130/2130R from Netscape Navigator 4.x or Internet
Explorer 4.x or 5.x (see note below).
Follow the instructions below to access your surveillance images:
1. Start your browser.
2. Enter the name or IP address of the AXIS 2130/2130R into the Location/Address field
(URL) of your browser:
Example!
A video image, similar to the example featured on page 22, is now displayed in your
browser.
Note:
To enable the updating of images in Microsoft Internet Explorer, you must set your browser to
allow ActiveX controls and perform a once-only installation of Axis' ActiveX component onto
your workstation. If your computer prohibits the downloading of additional software compo-
nents, you can alternatively configure your AXIS 2130/2130R to use a Java applet for updating
the images. For more information on this, please refer to the on-line Help.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the AXIS 2130 PTZ Network Camera AXIS 2130/2130R User’s Manual
22
Positional Control of the Camera
The camera’s Pan/Tilt/Zoom (PTZ) device is controlled directly from the unit’s web
interface, as shown in the illustration below:
Focus
Iris
Allows smooth or stepped
camera focus between near
and far focus.
Controls the amount of light that
enters the camera through the lens.
Set to Auto for optimum performance.
Zoom
Allows smooth or stepped camera
zoom between telescopic and
wide viewing.
Select Preset Position
To enable quick and
accurate camera posi-
tioning, up to 40 specific
positions can be saved
as presets, which are
created by the Adminis-
trator. Selecting a preset
position from the
Tilt
Allows smooth or
stepped vertical pan-
ning of the camera.
drop-down dialog
Home (H)
Returns the camera
to the ‘Home’ position.
immediately causes the
selected camera to
assume the predefined
position.
Click-in-image
For direct control of the
Pan
Allows smooth or stepped horizontal
Pan/Tilt/Zoom device.
panning of the camera.
Notes: •Clicking anywhere on the toolbar’s gradient allows for a “smooth” PTZ adjustment; whereas
clicking on the left or right arrows causes a stepped incremental change.
•Pan/Tilt/Zoom control can be disabled by the Administrator and may be unavailable in the user
interface.
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Other IP Setup Methods
23
Appendix A - Other IP Setup Methods
As an alternative to the ARP command (described earlier in the Installation section of this
manual), you can set the IP address for your AXIS 2130/2130R using any of the following
methods - as appropriate for your operating system:
Method
Operating Systems
Windows
Refer to...
AXIS IP Installer
The AXIS IP Installer, on page 24.
BOOTP
UNIX
Requiring a BOOTP daemon on your system, this
method operates over the entire network. A
request to an active daemon initiates a search of
the boot table to find an entry matching the unit’s
Ethernet address. The daemon downloads the IP
address to the device if a match is found.
Notes: •Make sure the AXIS 2130/2130R is powered up and connected to the network.
•IP Address: Acquire an unused IP address from your Network Administrator, and do NOT use the
default IP address featured in the following examples when installing your AXIS 2130/2130R.
•Server Privileges: Although no special privileges are required for Windows 95/98/ME or XP
(Home), you will need Administrator privileges for Windows NT/2000 and XP (Professional).
UNIX systems require Root privileges.
Ethernet/Mac Address: The AXIS 2130/2130R is pre-configured with a unique Ethernet/Mac Address based
upon the serial number printed on the underside label of the unit; where the serial number typically follows
the format 00-40-8c-xx-yy-zz. You need this address to complete the installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Other IP Setup Methods
AXIS 2130/2130R User’s Manual
24
The AXIS IP Installer
The AXIS IP Installer is a Windows program that is ideal for setting the IP addresses for
multiple Axis networking products. Allowing you to conveniently access the home page of
any Axis ThinServer device connected to your network, this freely distributed software is
Installing the AXIS IP Installer:
1. Download the latest version of the AXIS IP Installer onto your desktop and run
Setup_IPInstaller.exe to start the installation.
2. The AXIS IP Installer setup dialog is displayed on the screen.
3. Follow the instructions as they appear. Click Finish to complete the installation.
Setting the IP Address with the AXIS IP Installer:
1. Run the AXIS IP Installer from the Start menu. The AXIS IP Installer dialog is
displayed on the screen.
2. Restart your AXIS 2130/2130R.
3. Select the serial number of your AXIS 2130/2130R in the list. The serial number is
identical to the unit’s Ethernet address.
4. Enter the IP address. Click Set IP address. The IP address will now be set.
5. To access the home page of the AXIS 2130/2130R, click Home page of selected
Axis-server... You can now configure the AXIS 2130/2130R to your requirements.
6. Click OK to exit the program.
For more help during the installation of the IP address, click Help or use the F1 key.
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Troubleshooting
25
Appendix B - Troubleshooting
This appendix provides useful information to help you to resolve any difficulty you might
have with your AXIS 2130/2130R. Symptoms, possible causes and remedial actions are
provided in a quick reference table.
One of your first actions when attempting to solve a problem should be to check the
firmware version currently installed. An updated version may contain a correction that
fixes your particular problem. For more information, please see Updating the Firmware, on
page 29.
Support
If you cannot solve your problem after reading the information in this appendix or after
referring to the AXIS 2130/2130R FAQ, you can pass the problem to the AXIS support
desk. To help us help you resolve your problems expediently, please be sure to provide the
following information:
• a brief description of the problem
• the Server Report
• the log file
• if relevant, an example of a poor image.
Server Report
The server report contains important information about the server and its software, as well
as a list of the current parameters.
The Log File
The AXIS 2130/2130R log file records events within the unit and can prove a useful
diagnostic tool when attempting to resolve any problems that might occur.
Viewing the File
To display the latest log entries since the last Restart of the system:
1. In the admin tools, click the button for General Settings.
2. Click the View Log File button. All server commands executed since the last Restart of
the system are displayed in a separate window.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
AXIS 2130/2130R User’s Manual
26
Alternatively, get a copy of the log file by typing the following command directly into the
location/Address field (URL) of your browser:
The log file can be read in any text editor and will look something like this:
Log file Events
Sep 13 11:30:01 AxisProduct syslogd 1.3-3: restart.
Sep 13 11:30:02 AxisProduct camd[22]: camd $Revision: 1.66 $ starting up
Sep 13 11:30:03 AxisProduct sh: Firmware release: Axis 2130 PTZ Network Camera 2.32
Sep 13 11:30:03 AxisProduct sh: Network configuration for AxisProduct
Sep 13 11:30:03 AxisProduct sh: IP: 10.13.10.153 MAC: 00:40:8c:47:00:ba
Sep 13 11:30:03 AxisProduct sh: Netmask: 255.0.0.0 Broadcast: 10.255.255.255
Sep 13 11:30:03 AxisProduct sh: Network: 10.0.0.0 Gateway: 10.1.1.1
Sep 13 11:30:03 AxisProduct parhand[21]: starting server
Sep 13 11:30:03 AxisProduct dstd[31]: Starting $Revision: 1.7 $
Sep 13 11:30:03 AxisProduct ssid[32]: "Starting" 16:15:32 $Revision: 1.14 $ 0
Sep 13 11:30:04 AxisProduct phpd: "Starting" 16:17:07 $Revision: 1.3 $ 0
Sep 13 11:30:04 AxisProduct boa[34]: starting server
Sep 13 11:30:04 AxisProduct iod[36]: iod: Starting 16:19:35 $Revision: 1.16 $
Sep 13 11:30:05 AxisProduct sftpd[24]: sftpd $Revision: 1.109 $ starting up
Typical AXIS 2130/2130R Log File
PINGing Your IP Address
determine whether a specific IP address is accessible. It also provides a particularly useful
method for confirming addressing conflicts with your AXIS 2130/2130R on the network.
Having disconnected your AXIS 2130/2130R, follow the instructions below in association
with Symptoms, Possible Causes and Remedial Actions, on page 27, and run the PING
utility to troubleshoot TCP/IP problems on your network:
1. Start a Command window and type ping x.x.x.x, where x.x.x.x is the IP address of
the AXIS 2130/2130R.
2. If you receive the reply destination host unreachable, then the AXIS 2130/2130R
is not accessible on your subnet. You must obtain a new IP address and reinstall the
unit.
3. If this does not solve the problem, disconnect the AXIS 2130/2130R from the network
and run PING again. See the table below for an interpretation of the results.
PING Reply
Interpretation and recommendation
Reply from <IP address>: bytes = 32; time = 10
ms.....
The IP address is already used and cannot be used again. You must obtain a
new IP address.
Request timed out
This IP address is not in use and is available for use with your AXIS
2130/2130R. If you already installed the unit using this IP address, the
installation may have failed. Reinstall the unit. Also check all cabling.
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Troubleshooting
27
Symptoms, Possible Causes and Remedial Actions
Symptoms
Possible causes
Remedial actions
The AXIS 2130/2130R cannot The IP address is already
be accessed from a browser. being used by another
device.
Run the PING utility (as described above) and follow the
appropriate recommendations.
The IP address is located on a Run the PING utility (as described in PINGing Your IP Address, on
different subnet.
page 26). If you get “no response” or similar, the diagnosis is
probably correct.
In Windows, check that the IP address for your AXIS 2130/2130R is
on the same subnet as your workstation. Exactly how this is done
varies from one version of Windows to another. See Windows’ help
for more information.
If your AXIS 2130/2130R and your workstation are on different
subnets, you will not be able to set the IP address. Contact your
network administrator.
In Windows 95, the ARP
table was empty when you
tried to set the IP address.
In Windows 95, the ARP command cannot be used if you have an
empty ARP table. If the table is empty, re-install the product
ensuring that the IP address for your own PC is also used.
Type arp -ato view the ARP table. If it is empty, you must ping
an existing unit on your network before you can download the IP
address to the AXIS 2130/2130R, using ARP.
Note: The AXIS IP Installer is an easy-to-use alternative for
installing the unit.
The IP address has changed. Check that there is no DHCP server running on the network and
disable BOOTP in the admin tools (Network>TCP).
Note: The AXIS IP Installer will not work with DHCP.
Other networking problems. Test the network cable by connecting it to some other network
device and then PINGing that device from your workstation.
Test the unit’s network interface by connecting a local computer to
the unit, using a standard Crossover (hub-to-hub) Cable.
A programming script is
locking the unit.
Restore the unit to the factory default settings.
The Power indicator is not
constantly lit.
The Network indicator
displays red.
Faulty power supply.
Faulty cabling.
Verify that you are using an Axis PS-D power supply.
See Other networking problems, above.
Your AXIS 2130/2130R works Firewall protection.
locally, but not externally.
Check the Internet firewall with your system administrator.
Check if you need to configure the default router settings.
Default routers required.
The Internet site is too
heavily loaded.
Use a script running on your web server to relay images from the
AXIS 2130/2130R to the Internet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
AXIS 2130/2130R User’s Manual
28
Symptoms
Possible causes
Remedial actions
Triggering difficulties with
programming scripts.
Unable to trigger on both
positive and negative
transitions of the I/O ports
(double-edged triggering).
Repetitive trigger conditions that occur in quick succession can be
missed. This is because the command initiated by the first trigger
event may not have been fully executed before the second event
starts. This scenario is demonstrated in the illustration below:
Command
Command
?
Command
T2
T3
T1
Time
Trigger
This feature has particular significance when using commands that
take a relatively long time to process, e.g. mail or FTP, especially if
they are transmitting a pre/post alarm buffer.
Bad snapshot images.
Display incorrectly
configured on your
workstation.
In Display Properties, configure your display to show at least 65000
colors, i.e. at least 16-bit.
Using only 16 or 256 colors on your display will produce dithering
artifacts in the image.
Note:
If you still have a problem after reading this information, please contact your reseller or visit
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Updating the Firmware
29
Appendix C - Updating the Firmware
The AXIS 2130/2130R firmware is stored in Flash memory. This memory is provided by a
silicon chip that, just like any other ROM device, retains data content even after power is
removed. Flash memory is unique because it allows its data to be erased and re-written.
This means you can install firmware updates for your AXIS 2130/2130R as they become
available - without having to replace any parts. New firmware can be simply loaded into
the AXIS 2130/2130R over the network.
Obtaining Updated firmware
The latest version of the AXIS 2130/2130R firmware is available free of charge from the
Updating the firmware
The AXIS 2130/2130R Flash memory is updated over the network using FTP.
See the detailed instructions supplied with each new firmware release.
Important!
•
•
Always read the upgrade instructions available with each new release, before updating the firmware.
Upgrading normally takes between 30 seconds and 10 minutes, although it can take longer. After
starting the process, you should always wait at least 20 minutes before power-cycling the AXIS
2130/2130R - even if you suspect the procedure has failed.
•
In controlled environments, flash memory updates provide a very safe way of updating the firmware.
However, flash products can become damaged if the update is not performed correctly. Your dealer
reserves the right to charge for any repair attributable to faulty updating by the user.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing The Video Server
AXIS 2130/2130R User’s Manual
30
Appendix D - Customizing The Video Server
Modifying the File System
The Linux-based operating system and flash memory file system make it possible for
advanced users and application developers to customize the AXIS 2130/2130R by adding
additional files to the read-write area of the flash memory.
Important!
•
•
Modification of the flash file system is NOT supported by Axis. In practice, this means that Axis will
not answer questions relating to custom script or Web page development, but merely wishes to
inform potential application developers of the possibilities afforded by the Linux-based file structure
of the AXIS 2130/2130R.
When attempting to modify the product, you may inadvertently create a problem that will require
you to return the AXIS 2130/2130R to its factory default settings. At worst, you may even cause per-
manent damage to the unit that renders it unusable. Consequently, Axis strongly recommends that
inexperienced users DO NOT modify the file system.
does maintain various documents designed to assist third-party development, for example,
the Axis Camera API, HTTP-Interface Specification.
Configuring using FTP
As an alternative to configuring the AXIS 2130/2130R using a browser, the configuration
parameters of your unit can be modified using the File Transfer Protocol (FTP).
FTP is supported by most operating environments and is a useful method for quickly
downloading standard pre-configurations to one or more units.
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Customizing The Video Server
31
Custom Web Pages
The AXIS 2130/2130R contains a re-writable flash memory file system that allows some
directories and files to be changed by the root user, using FTP. This strictly non-supported
product functionality, makes it possible for advanced users and application developers to
add their own Web pages, scripts, and other files to the Axis product.
Customizing Procedures
The existing Administration pages are stored in a compressed read-only area of the file
system. If you intend to try changing them you must adhere strictly to the instructions
provided here and ensure that you DO NOT inadvertently change any files other than those
featured in this section. Failure to comply with this notice may render your product
unusable.
All files stored in the /etc/httpd/html directory are available through the product Web
server in the virtual directory /local/. The URL to resident pages in the /etc/httpd/html
directory is http://IP/local/<filename>.htm.
Editing and Storing Your Web pages
Follow the instructions below to create and save customized pages to the AXIS
2130/2130R:
1. Using a html editor, create your html file and store it on your local PC hard drive.
2. Now use ftp to upload the file to the AXIS 2130/2130R. Enter the following on the
command line:
ftp <server ip address >
Example!
ftp 172.21.1.200
3. Log on as rootwith the root password pass.
4. Change to the correct directory within the AXIS 2130/2130R by entering the following
command:
cd /etc/httpd/html
5. For binary storage of the files (not absolutely necessary, but good practice), type bin.
6. Upload your html files by entering:
put <filename.html>
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing The Video Server
AXIS 2130/2130R User’s Manual
32
7. Start your browser and view the Web pages you uploaded, by entering the following
URL in the location/Address field:
Example!
The images are now updated in your browser.
8. Enter bye in the command window to exit the ftp program.
Note:
You can change the html files as and when you like, but remember that the available flash
memory is limited.
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Customizing The Video Server
33
Creating a New Home Page
Having created and stored your new custom Web pages in product memory, you then
proceed to assign one of these pages as your default Home page in the AXIS 2130/2130R,
as described below:
Caution!
Adding a new Web page to your AXIS 2130/2130R is not something that should be undertaken lightly.
Remember: Axis does not support the personalization of product Web pages and strongly recommends
that inexperienced users DO NOT perform such modifications.
1. Start a new ftp session to the AXIS 2130/2130R, by entering:
ftp <camera ip address >
2. Type bin
3. Navigate your way to the appropriate directory, entering:
cd /etc/httpd/conf/
4. Fetch the boa.conf file, by typing:
get boa.conf
5. Edit boa.conf and add the following line to the end of the file:
Alias /index.html /etc/httpd/html/index.html
Alias / /etc/httpd/html
This will create an alias to your own “homemade” index.html file stored in the
/etc/httpd/html/ directory and redirect access to it. Replace the edited boa.conf in
the video server, by using the Putcommand.
Note:
As an alternative to the above, you might like to edit the line starting with Document Root
so that it points directly to the local directory. However, after doing this you will then be
unable to access the original Home pages - so be warned!
6. After making these changes, you will not be able to automatically access the default
index page. Instead you must type in the complete URL to access it:
Download from Www.Somanuals.com. All Manuals Search And Download.
The I/O Terminal Block Connector
AXIS 2130/2130R User’s Manual
34
Appendix E - The I/O Terminal Block Connector
A 4-pole connector is provided for external I/O connections to the AXIS 2130/2130R. The
connector provides the interface to a single output and a single input. A diagram for the
connector, complete with a pinout table is provided below.
Pins
Function
OUT A
OUT B
The two external device output terminals (A and B) are automatically switched to the
connected or disconnected postion - there is no distinction between + and -. The terminals
use optocouplers and are electrically insulated from the other internal circuitry.
The maximum load should not exceed 100mA and the maximum voltage should be no
higher than 50V DC. Note: Connecting AC to the output will damage the unit.
A
B
IN+
IN -
The external device input terminals consist of a + terminal and a - teminal. The - terminal is
grounded on the inside of the main unit. Interupts are generated by connecting cables to
the terminals and shorting (ON) or breaking (OFF) the circuit. Sensors and switches should
be connected to these terminals with electrically isolated GND and power supplies.
+
_
Input
Used for connecting external alarm devices and triggering images for specific alarm-based
events, the input is typically connected to a motion detector - or any other external
security device - for saving images on each occasion the detector is activated.
Output
The output can drive a maximum load of 50V DC at 100mA directly, and by connecting
additional relay circuitry, it can drive even heavier loads. If the output is used with an
external relay, a diode must be connected in parallel with the load for protection against
any voltage transients.
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
The I/O Terminal Block Connector
35
Schematic Connection Diagram of the I/O Connector
+3.3V
10k
10k
10k
+
Input terminals
0.1µF
IN+, IN-
-
Output terminals
OUT A, OUT B
Controlling and Monitoring
By entering http requests in your browser’s URL field, you can:
• drive the relay output high or low
• monitor the status of the digital input
This requires you to have root access to the AXIS 2130/2130R and consequently, to supply
a user name and password. Login as root and supply the root password (default = pass).
Tip!
Developers wishing to create applications incorporating sophisticated alarm conditioning using the
relay output and digital input are encouraged to read the Camera API, HTTP-Interface Specification,
Relay Output
The relay output can be used to directly drive a maximum load of 50V DC at 100mA. By
connecting additional relay circuitry, it can also drive heavier loads.
The output relay is controlled using http requests, as defined in the following examples:
Example 1: - Set output 1 ON
Download from Www.Somanuals.com. All Manuals Search And Download.
The I/O Terminal Block Connector
AXIS 2130/2130R User’s Manual
36
Example 2: - Set two 300ms pulses with 500ms delay between the pulses on output 1.
http://myserver/axis-cgi/io/output.cgi?action=1:/300\500/300\
Example 3: - Wait 1 second before setting output 1 ON.
Digital Input
The digital input is programmed using the Application Wizard, allowing the AXIS
2130/2130R to be configured for time and alarm-based image recording. For example, by
connecting a motion detector to the digital input, it is a relatively simple procedure to send
a single image (or video stream) to a remote imaging library each time the detector is
activated.
Querying the Status of Digital Inputs
The status of the digital input can be queried in exactly the same way as the relay output.
Simply enter the following URL to query the status of the digital input:
Example: - Monitor data on input port 1:
The AXIS 2130/2130R then displays the status of the input, as follows:
Input 1 = 0
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Technical Specifications
37
Appendix F - Technical Specifications
System Requirements
• Windows 98, Windows 2000, Windows XP, Windows NT, Windows ME, Linux, or UNIX.
• Microsoft Internet Explorer 4.x/5.x or Netscape 4.x
Network
• Supported protocols - 10baseT Ethernet or 100baseTX Fast Ethernet, TCP/IP, HTTP, FTP, SMTP,
NTP, ARP, CHAP, MAP, DHCP, BOOTP
• Network connection - RJ-45 twisted pair cable
Camera
• Image sensor - 1/4 inch CCD photo-sensitive element
• Resolution (pixels) - 704x480
• Backlight Compensation, Automatic Gain Control (AGC), Automatic White Balance (AWB)
• Illumination range - min 6 lux
Image
• Compression - 5 user-controlled compression levels.
• Frame rate - Up to 30 frames/sec at 352x240 resolution, up to 12 frames/second at 704x480
resolution.
• Motion-JPEG and single snapshot JPEG images.
• Bandwidth - 30 frames/second typically requires approximately 1,5 Mbps. Bandwidth control
available from admin tools.
• Time stamp and text overlay. Color control (B/W or color).
Pan/Tilt/Zoom
• Optical zoom - 16x
• Pan angle range AXIS 2130: 200º (+/-100º)
• Pan angle range AXIS 2130R: 340º (+/-170º)
• Tilt angle range AXIS 2130: 60º (+10º, -50º)
• Tilt angle range AXIS 2130R: 100º (+10º, -90º)
• 40 preset positions. Home Position Function.
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
AXIS 2130/2130R User’s Manual
38
Operating Environment
• Temperature: +40o to +125oF (0o to +40oC)
• Humidity: 20-80% RH non-condensing.
• Approved environmental housing required for outdoor use.
Hardware
• ARTPEC-1 compression chip
• ETRAX 100 LX, 32-bit RISC, 100 MIPS CPU
• 16MB RAM
• 4MB FLASH memory.
I/O
• 1 input and output on a single terminal connector.
• Event-triggered actions for remote image storage via FTP or e-mail (SMTP), pre/post alarm
image storage.
Pre/Post Alarm Buffer
• Up to 4 MByte memory available for pre/post alarm image storage.
Power
• Power supply - 13V DC
• Power consumption - max 25W
Approvals - EMC
• FCC Class B (DoC)
• VCCI Class B
• AS/NZS3548 Class B (C-tick)
• EN55022/1994, EN50024/1998
• EN61000-3-2/1998
• EN61000-3-3/1995
Approvals - Safety
• EN60950, UL, CSA (Japan)
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS 2130/2130R User’s Manual
Technical Specifications
39
Dimensions & Weight
• Height - AXIS 2130: 4.2” (10.7cm), AXIS 2130R: 5.4” (13.7cm)
• Width - 4.4” (11.2cm) - both models
• Depth - 5.6” (14.3cm) - both models
• Weight - 1.41lb. (0.64 kg) - both models
Security
Multi-user password protection.
Management
Remote configuration and status using Web-based tools.
File Sizes
The AXIS 2130/2130R delivers the following file sizes:
AXIS 2130/2130R
Resolution
704 x 480
352 x 240
176 x 112
File size (kb)
7 - 150
Max fps
10
1.4 - 40
30
0.3 - 10
30
All specifications are subject to change without prior notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
40
Input 34
Index
A
Installation 9
Administration tools 11
Anonymous user access 14
ARP 27
AXIS IP Installer 23
L
Log file 15, 25
B
Bad snapshot images 28
BOOTP 23
C
Ceiling mounting 8
Compression 18
Configuration 11
FTP 20
Connecting the hardware 9
Current position 19
Output 34
D
Default viewer 15
DHCP 17
DNS settings 16
Dynamic IP address notification 17
Password 14
Personal settings 15
E
Ethernet address 23
External connections 34
F
Firmware 25
Relay output 35
Resetting 16
Resolution 18
Firmware update 29
Flicker reduction 18
Focus 22
S
FTP 20
Security 14
Serial Port Settings 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
41
Server Report 15, 25
SMTP settings 16
Specifications 37
Support 25
T
TCP/IP settings 16
Technical specifications 37
Tilt 22
Triggering images 34
Triggering snapshots 36
Tripod mounting 8
U
Unauthorized access 14
Updated frimware 29
Users 14
V
Video settings 18
Z
Zoom 22
Download from Www.Somanuals.com. All Manuals Search And Download.
|