INTEGRATED DIGITAL FULL HD COLOURTELEVISIONS
32WLU550FHID
Operation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
1
LCD panels are produced with state-of-the-art technology. However, there may be missing or
lit spots on the screen under certain circumstances. That does not mean that the product is
faulty.
1.1-Cleaning the screen and cabinet...
After powering off, wipe the screen and the cabinet clean with a soft and dry cloth. We
recommend that you do not use patented polishes or solvents on the screen or cabinet since
they may cause damage.
1.2-Disposing of your TV at the end of service life...
The cold cathode fluorescent lamp found in your LCD screen contains a very small amount of
mercury. Once your TV reaches the end of its useful life, please dispose of it in accordance
with local government regulations or leave it at a recycling centre.
1.3-Superior features of your integrated digital television
This television can receive and process all analogue and digital broadcasts. This television set
has an integrated digital and analogue receiver. The digital receiver unit processes the signals
coming from digital transmitters and converts them into superior sound and image quality. TV
Guide (valid for digital broadcasts only) informs you about changes in the program list briefly
and provides program lists of all digital broadcasts for a number of forthcoming days. You
can display detailed information about each program by pressing a single button if this feature
is supported by the broadcaster. This television has a comprehensive and user friendly menu
configuration.
1.4-Receiving digital broadcasting channels
You will need an outdoor aerial to receive digital broadcasts. Contrary to the analogue
broadcasts, all digital broadcasts may not have their own transmission frequency. Instead,
various digital broadcasts channels are gathered in regional or national groups called
bouquets. You can find current transmission data from teletexts of various broadcasters or
from TV guide or from the internet.
NOTE:
• HD signals must be connected to the HDMI input or component (YPbPr) inputs. See
page 8 for external connections.
• You should check your postcode to make sure that you are in freeview coverage area
(www.freewiew.co.uk).
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1.5-Changing the plug
The supplied mains cable already has a mains plug fitted, however should you need to
replace it at any time please refer to the appropriate wiring information below for your
particular cable.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Features of your new television
We would like this product, which has been manufactured in modern facilities in accordance
with total quality principles, to offer you the best performance. Therefore, please read this
entire manual carefully before you use your TV and keep it in a safe place for future reference.
2.1-Special Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Full HD
HDCP feature
MHEG 1.06
CI Slot input
8-day EPG (Electronic Program Guide)
Favourite channel list in digital mode (maximum 6 lists)
Compatible with cable broadcasts
Wide angle of vision
PIP (Picture in Picture) from AV
Scart socket, AV Socket and external sound system connection
S-VHS and v inputs for S-Video connection
PC connection, 2-HDMI 1.3 input
Low energy consumption
AVL
SRS TruSurround sound
DNR and MPEG NR
Programmable power on
Programmable power off
250 pages Teletext
Fastext
Graphic equalizer
Sharpness feature in Colour Transitions (CTI)
Sharpness feature and picture resolution (LTI) in black-white transitions
A clearer Picture made possible with a Digital Comb Filter
Active Contrast
On-screen viewing of all settings, program numbers and all the processes
Manual Fine Tuning
100 Analog Program memory
1000 Digital channel memory
Infrared remote control equipped with all functions
Parental Control
Ability to watch NTSC broadcast via Scart input
User friendly on-screen menu system
4:3, 16:9, 14:9 Letterbox, Subtitle and Panorama picture formats
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Important Safety Instructions
This symbol is used to warn the user about the “dangerous voltage” contained
inside the housing of the product that may create a risk of electrical shock.
This symbol is used to remind the user important usage and service instructions
supplied with the TV.
1) Please READ the operating
•
Never install the TV into closed places
such as bookcases or cabinets unless
adequate ventilation is provided.
instructions before using
the TV for the first time.
2) Please observe the
instructions contained in
the Operating Instructions.
3) Please consider all warnings.
4) MAKE SURE that all
power connections
(extension cables and the
connections between the
8) DO NOT COVER the
ventilation openings
TV components) have
been made properly and
of the TV with items
in accordance with the manufacturer’s
instructions. Before making or changing
the connections, power off the TV and
unplug the mains connection plug.
such as newspapers,
table-clothes, curtains,
etc. Overheating causes damage and
shortens the service life of the TV.
5) If you have any doubts regarding the
installation, operation or safety of the TV,
please REFER to the retailer.
9) Your TV may be damaged
if you place it under
direct sunshine or close
to a heater. Please
6) BE CAREFUL with glass panels and
covers on the TV. The screen glass
may break and cause serious injuries if
something hits it.
abstain from using the
product in very hot or
humid locations or in places where the
temperature is likely to decrease below
5°C (41°F). DO NOT PLACE on or near
the TV any hot objects or items with
open flame such as candles or any night
lamps. The high temperature can melt
plastic parts and cause a fire.
7) To ensure adequate ventilation, please
leave a clearance area of at least 10 cm
around the television. This clearance
prevents the TV from overheating and
consequently causing damage.
•
Using the TV in dusty environments
should also be avoided.
Never block the slots and openings by
placing the TV on a bed, sofa, pillow or
other similar surfaces.
•
4
Download from Www.Somanuals.com. All Manuals Search And Download.
10) Never operate your
TV close to water.
13) Make sure that the power
cable is not stepped on and
that there is no bending
Operating your TV,
for example, near a
bathtub, washbasin,
at the plug sections, plug
heads and TV output point.
kitchen washbasin, washing basin, wet
basement and swimming pool can cause
fire or electric shock.
14) Use only the add-ons/accessories
specified by the manufacturer.
•
Do not allow your TV to get wet. Never
pour any liquids onto
15) Use only brackets or
stands specified by the
the TV. Do not operate
manufacturer or sold along
with the product. Place your
device on a level surface.
your TV if any solid
or liquid substance
enters into it. This can
cause electric shock and your TV may be
damaged. Have it checked immediately
by qualified personnel.
•
Keep open flame sources (such as
candles) away from TV
in order to avoid risk of
fire.
16) Unplug the power cable
during thunderstorms or
when you will not use your
TV for a long period of time.
11) DO NOT USE
17) Consult authorised
headphones at extremely high volume
levels since this may
cause permanent loss of
hearing.
service personnel for
service requirements.
Never attempt to
repair the TV yourself.
Opening the cabinet
12) Operate your TV only in
the 230 V 50Hz voltage
range. Use the AC power
cable supplied with the
product. If your TV is
can expose you to dangerous voltages
or other hazardous situations. Service is
required in situations such as damage
to the power cable of the TV or its plug,
water spills or substances falling into
the TV, the TV is subjected to rain or
moisture, it does not operate normally or
it is dropped.
a grounded (Class I)
product, then it must
certainly be connected to
a grounded socket.
•
•
The socket into which you plug in the
AC power cable must be within easy
reach.
Unplug the TV in order to disconnect
it from mains power.
Note: Do not use defective sockets. Make
sure that the plug is firmly inserted into
the socket. If the plug remains loose,
then it can cause fire due to arcing. Refer
to an electrician to have your socket
replaced.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
18) Wipe the TV cabinet
20) Disposing of the exhausted
clean with a soft and dry
batteries:
cloth. Wipe dust from the
•
Dispose of the exhausted
screen gently with a soft
batteries in accordance with
the local laws and regulations in order to
protect our environment.
cloth. Stubborn stains
can be cleaned with a
cloth slightly moistened
with soap and lukewarm water. Never
use solvents such as thinner or gasoline
for cleaning. Unplug the AC power cable
from the socket when cleaning the TV.
Otherwise, there is the risk of electric
shock.
21) Do not dispose of your TV
with regular household waste.
Observe local laws and
regulations for disposal.
22) For stand fitting and removal please refer
to loose leaf sheet inside TV carton.
19) Do not dispose of the
batteries in fire.
Note 1: This is a Class A product. During
operation, the device can cause radio
interference. In this case the user may
have to remedy this. Please contact your
specialist dealer.
•
Do not short circuit,
dismantle or overheat
the batteries. There is
the risk of explosion
if the batteries are not replaced
correctly. Replace only with the
same or equivalent type batteries.
Note 2: Electromagnetic fields can cause
temporary performance degradation. This
can be distinguished as noise in the image.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Start
4
Remove your television carefully from its
box. You can keep the packaging of your
television to use in future.
Not 1: Your TV will switch to the STANDBY
mode in five minutes if there is no broadcast
signal from the aerial.
Note 2: Your TV is equipped to operate with
TV buttons in case your remote is broken or
the batteries are exhausted.
Contents of the box
Power cable
Remote control
3. To power on your television,
press any numerical key or PR+ or
PR- keys on the remote control.
For this process, you can also use
the buttons on your TV. The picture
will appear on the screen after a
short while.
2 batteries
Note: Scart, HDMI, VGA and PHONO
cables are not supplied with the device.
4.1-Aerial connection
Note: If you are not going to use your
television for a long time, unplug its power
cable from the socket.
Initial power on and performing
settings
To set up your television, read the sections
on the TV controls and making the channel
settings.
4.2-Powering on your TV and
the initial use
4.3-Batteries
1. Insert the power cable into the power
supply input located on the back panel of
the LCD TV.
2. Insert the power cable plug supplied with
the device into the mains socket.
Open the lid of the battery compartment
and make sure that you have placed the
batteries in the correct direction. For this
remote control, UM-4, IEC R03 or AAA 1.5 V
batteries are suitable.
Do not throw your old batteries into the fire,
discard them in a dedicated waste area for
this purpose.
OR
Do not mix used batteries with new ones or
different types of batteries together.
The performance of the remote control will
be reduced at a distance of 8 meters from or
at an angle of 30 degrees beyond the centre
of the TV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Your new television
5.1-TV Control Panel
Volume Level Down/Up
button
Program Down/Up button
or
or
or
Menu button / Source selection button
or
On-Off / Standby button
or
or
Stand by indicator
Bright light: TV is in Stand-by
Dimmed light: TV is On
No light: Power Cable is not connected.
or
5.2-Rear and Side External Connections
1-Component video input (Y)
2-Component audio input (L)
3-Component video input (Pb)
4-Component audio input (R)
5-SPDIF Digital audio output
6-Component video input (Pr))
7-VGA (PC connection input))
8-AV1 scart
9-AV2 scart)
10-Antenna input
11-PC audio input
12-Power input
13-Stereo Headphone socket
14-S-VHS input
15- Video input PHONO connector
16-Sound input PHONO connector (Left/L)
17-Sound input PHONO connector (Right/R)
18-CI slot input
19-HDMI 1 input
20-HDMI 2 input
Please see Technical Specifications Table on page 31 for the available external connections
on your television.
• Please do not use the video PHONO and S-Video connection simultaneously, otherwise
these two devices might influence the picture quality of one another.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3-Remote Control
Stand-by mode On/Off button
Temporary sound mute (Mute) button
AV modes selection menu button
Picture Format selection button
PAT (Picture and Teletext) Mode
ZOOM mode selection button
Subtitle selection button (D)
Not used on this model (D)
Numeric buttons
TV, Radio, Data, Favorite channel selection button (D)
Page Stop button in Txt mode (Hold)
EPG selection button (D)
Question/Answer button in Txt mode (Reveal)
Information button
Index page button in Txt mode
MENU button
Exit menu button
Return to previous menu button
Up movement button (Menu)
Next page selection button in Txt mode
Down movement button (Menu)
Previous page selection button in Txt mode
Left movement button (Menu)
Change source in PIP mode button
Right movement button (Menu)
Change source in PIP mode button
Menu selection confirm
Program table selection button
Volume down button
Volume up button
Program forward selection button
Program backward selection button
Red teletext button
Start Digital Teletext
Green teletext button
Yellow teletext button
Blue teletext button
Teletext/Mix selection button
Equalizer selection button
Teletext page enlarge button (Double)
Picture Mode selection button
Page update button in Txt mode (Update)
Note: In the analog mode
when no menu is open on the
screen, Up/Down movement
buttons function as program
forward/backward button and
Left/Right movement buttons
function as Volume up/down
button.
Last viewed program selection button
Sub page button in Txt mode (Sub Page)
Freeze Picture button
Time Display button
Change PIP size button
PIP selection button
(D) : Digital Mode Only
Change PIP position button
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing the initial power-on settings
6
6.1.5-Temporary sound mute
6.1-TV controls
6.1.1-Temporary on/off (STAND-BY)
(MUTE)
To temporarily mute the sound of
your television, press the MUTE
button on your remote control.
In that case, MUTE symbol will
appear on the screen. When you
press the same button a second
When you press the red STAND-
BY button located on the upper left
hand side of your remote control
while your television is switched
on, the sound and the picture will
go off. In the stand-by mode, the
power indicator of your television
will glow brighter. To switch your
television back on, either press
any numeric button or PR+/PR-
buttons.
time, the sound will be restored. If you press
the VOL+ button while in the Mute mode,
the sound level is increased and the Mute
function is aborted.
6.1.6-Returning to Selected Program
(SWAP)
Caution! If you are not going to use your
television for a long time, unplug its power
cable from the socket.
Allows you to switch between the
current program you watch and
the last selected program. For
6.1.2-Channel Selection
example, if you change the channel
to Program 11 while you were watching
Program 1, press SWAP button to switch
back to Program 1. Press SWAP button to
switch back to Program 11 again.
You may select whichever program
number you would like by pressing
the PR+/PR- buttons located on
your television and your remote
control. To select the programs
that are above 9, you can use
the Numerical buttons. You may
enter the number of the program
you would like to select using the
numerical buttons. For example,
to switch to the program number
12, press respectively the numeric
buttons 1 and 2 on your remote
control. You can perform the program
selection also from the Program Table.
6.1.7-Main Menu
Press the MENU button. The Menu
including all the setting menus will
appear on the screen. Navigate
through the Menu titles with the
Up/Down movement buttons and
press the OK button to select the
desired menu. If you want to exit
the menu in any step, just press the EXIT
button. Press BACK or MENU buttons to
return to the previous Menu while you are in
a sub menu.
6.1.3-Digital TV, Analog TV and AV
Mode Selection
Press the AV button on your remote
control. SOURCE menu will be
displayed. Select DIGITAL TV,
ANALOG TV or desired AV mode
from the Source menu with Up/
Down movement buttons and
confirm with OK button so that your
television will switch to the source
you have selected.
MAIN MENU
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURES
6.1.4-Performing the Volume setting
You can adjust the volume of your
television by using the VOL+/VOL-
buttons on your remote control.
SELECT
EXIT
Download from Www.Somanuals.c1om0. All Manuals Search And Download.
SETUP
6.2-Turning on the TV and
Setting the Channels
AUTO TUNING
MANUAL TUNING
FIRST TIME INSTALLATION
When you turn on your television for the
first time, FIRST TIME INSTALLATION
CHECK AERIAL CABLE IS CONNECTED.
PRESS OK KEY TO CONTINUE message
is displayed. If the antenna connections
are correct, press OK button to continue.
COUNTRY SELECTION menu will be
displayed. Select the country by using Up/
Down, Left/Rightmovement buttons
and press OK button to start the auto
programming. Channel Searchmenu will be
displayed and digital channels are scanned
and stored in the memory.
After completion of the searching process
Channel Search Results menu will
be displayed. Number of TV and Radio
channels already detected and stored in the
memory at the end of the search process will
be displayed in this menu. Finish the Digital
channel searching process by pressing the
OK button.
BACK
SELECT
Select AUTO TUNING tab and
confirm by pressing the OK button.
COUNTRY SELECTION menu will
be displayed.
COUNTRY SELECTION
BELGIUM
CZECH REP.
DANMARK
DEUTSCHLAND
ELLADA
NORGE
ÖSTERREICH
POLSKA
PORTUGAL
SCHWEIZ
SUOMI
ESPANA
FRANCE
SVERIGE
TÜRKİYE
U.K.
HUNGARY
IRELAND
..........................
ITALIA
NETHERLANDS
PRESS OK KEY TO START ANALOG
SEARCH PRESS MENU KEY TO EXIT
message will be displayed. You can make
Analog channel tuning with OK button
or finish the searching process by pressing
the MENU button.
START AUTOPROGRAMMING
Select the country by using Up/
Down, Left/Rightmovement
buttons and press OK button
to start the auto programming.
Channel Searchmenu will be
displayed and digital channels are
scanned and stored in the memory.
6.3-Performing Digital Tunings
You can either tune the Digital programs
automatically or manually and store them in
your television.
6.3.1-Automatic Tuning of Channels
and Storing in the Memory
Channel Search
Waiting for signal...
Press AV button on your remote
control, select DIGITAL TV tab
from the SOURCE menu by using
Up/Down movement buttons and
confirm by pressing the OK button.
Your TV will switch to Digital mode.
Press MENU button, MAIN MENU
will be displayed. Select SETUP tab
with Down movement button and
confirm with the OK button. SETUP
menu will be displayed.
Service found:
TV:
0
Radio:
0
Other:
0
Stop Search
Note: You can also access Auto Tuning
menu from the System Menu submenu
under Digital Features menu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Highlight the Channel tab by
means of Up/Down buttons and
directly enter the frequency number
of the channel you want to search,
if you know, by using the numeric
keys on the remote control. If you
don’t know the frequency number,
you can scan frequencies by using
the Left/Right movement buttons.
After entering the frequency you
ADDITIONAL INFORMATION
Please note that Encrypted channels
may not be stored after scanning in
the Digital TV channels. If this is the
case then you will need to rescan the
channels again but this time change the
LIST SCRAMBLED CHANNELS from
AUTO to ON:
want to search, highlight Update of
Channel List tab with Up/Down movement
buttons and select either one of Add
channels, Replace channels or Erase
channel list items, then press OK button to
start searching. Channels will be searched
or changed according to the search method
you have chosen.
1
2
3
4
5
Press Menu.
Select Features.
Select Digital Features.
Select User Interface Options.
List Scrambled Channels will show.
Change “Auto” setting to “ON”
Press Exit button to exit the Menu.
6
You will need to rescan the digital TV
channels:
Channel Search
Waiting for signal...
1
2
3
Press Menu.
Select Setup.
Service found:
Select Auto Tuning and press the OK
button to start the channel scan and this
time store the Scrambled channels.
TV:
0
Radio:
0
Other:
0
Stop Search
6.3.2-Manual tuning of channels and
storing in the memory
Add Channels : With this option, the new
channels in the frequency which is desired to
be manually searched will be scanned and
added to the existing channel list.
Press MENU button in digital mode
and MAIN MENU will be displayed.
Select SETUP tab with Down
Replace Channels : With this option, you
can update the existing channel list with the
modifications made by the broadcasting
enterprise.
movement button and confirm with
the OK button. SETUP menu will
be displayed. Select MANUAL
TUNING tab and confirm by
Erase Channel List : With this option,
you can delete all channels in the existing
channel list to store only the new channels in
the desired frequency into the memory.
pressing the OK button. Manual Search
Parameters menu will be displayed.
Manual Search Parameters
Channel
21
474000
Add channels
Note: You can also access Manuel Tuning
menu from the System Menu submenu
under Digital Features menu.
Frequency
Update of Channel List
6.3.3-First Time Installation
If you select this function, all channel
information in the memory will be deleted.
The OSD where country selection shall be
made is displayed and channel search is
made automatically. First, digital channels
are searched. You can start Analog channel
search by pressing the OK button after the
digital channel search is completed.
Change
Back
Start
Download from Www.Somanuals.c1om2. All Manuals Search And Download.
6.3.4-Program Table
6.3.4.2-Creating favorite channels
list
With the program table, you can see the
stored channels in a list, switch between
TV channels and Radio channels or create
your favorite channels list for 6 TV and Radio
channels according to your preference.
You can create 6 favorite channel
lists according to your personal
preferences. To do this press
the RED button when you are in
Program table. Favorite Lists will
Select the PROGRAM TABLE item
from the main menu by means of
Up/Down movement buttons to
access program table and press OK
button to confirm. Program Table will
be displayed. You can also access
be displayed. All TV channels can
be seen on the Left hand side and
favorite channels on the Right hand
side. In All TV Channels list select
the channel you want to add to the
favorites list by using Up/Down
the program table menu directly by pressing
the OK button on your remote control when
there is not any open menu on the screen.
movement buttons and press OK button
to confirm; name of the channel you have
selected will be displayed on the favorite
channels list. Repeat the same steps fore
every channel you want to add. To create
a different favorites list, you can change the
favorite channels list by pressing FAV button
on your remote control and add channels
to these lists as described above. To select
directly the favorite channels lists you have
created, you can use the FAV button on
your remote control.
All
1 Channel
2 Channel
3
4
5
Back
Select
Change List
Edit List
Note: You can also access the Favourite
Lists menu from the Digital Features
menu.
6.3.4.1-Displaying Television and
Radio channel lists and selecting
the channels
6.3.5-Electronic TV Guide (EPG)
If it is supported by the broadcasting
enterprise, the electronic TV guide gives
entire general information about the
programs of the next 7 days (for digital
channels only).
When the program table menu is
opened, all TV channels stored
in the list are displayed. You can
navigate between the TV and radio
channels with Up/Down, Left/
Right movement buttons or you
can select any channel you wish
to watch or listen to by pressing
the OK button. Press the RED
button on the remote control when
your are in the program menu to
switch to the Favorite Channels list.
Favorite Lists will be displayed. You
can also select the TV and Radio
channels directly by means of the
FAV button on your remote control.
To display the Electronic TV Guide,
press EPG button on your remote
control. Electronic TV Guide will be
displayed.
Program
13:15
15:10
Reality Show
All
Monday 18/8/2007
13:45
1 BBC ONE
2 BBC TWO
3 ITV1
4 CHANNEL 4
5 FIVE
13:15
15:10
17:20
20:45
21:50
22:50
Program
News
Film
TV Series
Film
Program
6 ITV2
Change List
Exit
Next Day
Select
Previous Day
13
Download from Www.Somanuals.com. All Manuals Search And Download.
You can select the channel by using
the Up/Down movement buttons
and navigate through the program
data with Right movement button.
To get further information about
the program press INFO button
and detailed information about the
selected program will be displayed.
Press the GREEN button to display
next day’s program information,
press the RED button to display
previous day’s program information
and press OK button to add
To perform language selection,
select Subtitling Language 1,
Subtitling Language 2, Audio
Language 1, Audio Language 2
tab from the Language Settings
menu by using Up/Down
movement buttons and make your
language selection with Left/Right
movement buttons. You can also
select subtitles directly by SUBT
button on your remote control or
make sound selection by AUDIO button.
6.3.6.2-Access Control
Reminder to any program. You can
use the FAV button on your remote
control to switch between TV, Radio
and Favorites lists in the EPG menu.
With this feature you can restrict channels
that are not appropriate for children and
set age restriction for programs being
broadcasted.
6.3.6-Digital Features
Access Control
Lock/Unlock Channels
Change PIN
To enter digital features menu,
select FEATURES tab from the
main menu by using Up/Down
movement buttons. Select DIGITAL
FEATURES tab from FEATURES
menu by using Up/Down
movement buttons and press OK
button to confirm. DIGITAL FEATURES
menu will be displayed.
Select
Back
Digital Features
Language Settings
Access Control
User Interface Options
Timers
Favourite List
No Common Interface Module Present
System Menu
Lock/Unlock Channels: Select Lock/
Unlock Channels tabs from Access Control
menu and press OK button to confirm. All
TV Channels list will be displayed; select the
channel you want to restrict with Up/Down
movement buttons and press OK button
to confirm. x mark will be displayed at the
beginning of the channel name indicating
that the channel is restricted. To remove
the restriction, repeat the same steps. To
view the restricted channel enter the correct
password into the displayed password
screen. The channel will not be displayed
unless the correct password is entered.
Select
Back
You can select the menu headings with Up/
Down movement buttons to make settings.
6.3.6.1-Language Settings
You can select subtitle and sound language
provided that the broadcast is supported
for all digital broadcasting channels. Unless
you make any selection, the language
supported by the broadcaster will be selected
automatically.
Note 1: To re-prevent access after entering
the correct password and displaying the
restricted channel, your television has to be
switched to Standby mode and turned on
again.
Download from Www.Somanuals.c1om4. All Manuals Search And Download.
Note 2: The password for both of these
features has been set as 0000 at the factory.
You can change the password as you wish
under Change PIN item in the Access
Control menu.
desire by means of the Program Table. Press
AV button on your remote control, select
ANALOG TV tab from the SOURCE menu
by using Up/Down movement buttons
and confirm by pressing the OK button.
Your TV will switch to Analog mode. Press
the MENU button on your remote control.
Select SETUP tab with Down movement
button and confirm with OK button. Setup
menu is displayed.
6.3.6.3-User Interface Options
From this menu, you can decide whether
to display the scrambled channels in the
program table or not. If List Scrambled
Channels is set to ON, all channels will
be displayed, if it is set to OFF, scrambled
channels will not be displayed and if it is set
to AUTO and a CI card is installed to your
television, then the scrambled channels
supported by the card will be displayed.
SETUP
SYSTEM
I
CHANNEL
FINE TUNE
SEARCH
S06
0
P13
PROGRAM NO
STORE
AUTOPROGRAM
6.3.6.4-Timers
SELECT
BACK
In this menu you can view Reminders you
had entered from the EPG or change or
delete the entered Reminders.
Select PROGRAM NO tab by pressing
the Up/Down movement buttons in Setup
menu, enter the channel number to be
searched and stored automatically, then
select AUTOPROGRAM tab by using the
Up/Down movement buttons and press
OK button; Country Selection menu will be
displayed.
6.3.6.5-Favourite Lists
Please see 6.3.3.2-Creating favorite channel
list for detailed explanation of this feature.
6.3.6.6-Common Interface Module
In this menu, you can make the CI Module
settings that you can attach to your
television.
COUNTRY SELECTION
BELGIUM
CZECH REP.
DANMARK
DEUTSCHLAND
ELLADA
ESPANA
FRANCE
HUNGARY
IRELAND
NORGE
ÖSTERREICH
POLSKA
PORTUGAL
SCHWEIZ
SUOMI
6.3.6.7-System Menu
You can display your television’s hardware
and software data under this menu.
SVERIGE
TÜRKİYE
U.K.
..........................
6.4-Performing Analog
Tunings
ITALIA
NETHERLANDS
START AUTOPROGRAMMING
You can either tune the Analog channels
automatically or manually and store them in
your television.
In the Country Selection menu, select
the country, whose broadcast you would
like to watch in priority, by pressing the
right/left movement buttons and start
autoprogramming by pressing the OK
button. The channels will be automatically
searched and those found will be stored in
memory starting from the program selected
in the Setup menu. At the same moment,
the Autoprogram menu will be displayed
and a marker indicating the progress of the
autoprogramming will appear as shown
below.
6.4.1-Automatic tuning of channels
and storing in the memory
Note: If your television does not receive any
antenna broadcast for a period of 5 minutes,
it automatically switches to the stand-by
position. The countdown OSD is displayed
on the screen during the last 1 minute
(applicable for Analog mode only)
You can tune the programs automatically
with the Autoprogram function of your
television and then sort the channels as you
15
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOPROGRAM
SEARCHING
STOP
6.4.2.2-If you do not know the
channel number
% 20
Press the MENU button. Move
to the SETUP menu by pressing
To stop the process at any given time,
please press the MENU button. The
Program Table, which will allow you to sort
the channels as you wish, will be displayed
after the automatic search is complete.
the Down movement button in
the Main Menu and confirm your
selection with the OK button.
Setup menu will be displayed.
Select the system in which you
6.4.2-Manual tuning of channels and
storing in the memory
would like to make the search
from the SYSTEM tab. Move into
CHANNEL tab by pressing the
6.4.2.1-If you already know the
channel number
Down movement button. Press OK
on your remote control to select
Press the MENU button. Move to the
SETUP menu by pressing the Down
movement button in the Main Menu and
confirm your selection with the OK button.
Setup menu will be displayed.
“S” for cable channels and “C” for
channels received via the antenna.
Select SEARCH tab using the Up/Down
movement buttons, and scan the channels
in ascending order with Right movement
button and in descending order with Left
movement button. If the channel that is
found is of your liking, select the STORE tab.
Then store it in the memory by pressing the
Right or Left movement buttons. Repeat
the same procedure for other channels by
selecting the program number of your choice
from the PROGRAM NO tab. If the channel
you found is not of the desired quality and
requires Fine Tuning or if you would like to
rename the channel, refer to the relevant
sections.
SETUP
SYSTEM
I
CHANNEL
FINE TUNE
SEARCH
S06
0
P13
PROGRAM NO
STORE
AUTOPROGRAM
BACK
CHANGE
Select the system in which you
would like to make the search
from the SYSTEM tab. Move into
CHANNEL tab by pressing the
6.4.3-Fine Tuning
Down movement button. Press OK
on your remote control to select
If the channel you found is not of
the desired quality and requires
“S” for cable channels and “C” for
Fine Tuning, then select the FINE
channels received via the antenna.
TUNE tab by pressing the Down
Move onto the PROGRAM NO tab
and using the number buttons enter
the channel number in which you
movement button in the Setup
menu. Using the Left/Right
movement buttons on your remote
control, adjust the broadcast
would like to have the channel stored. If the
broadcast viewed on the screen is of your
desired quality, first move onto the STORE
tab with the down movement button to
store in the memory the selection you have
made and store the channel by pressing
the Left or Right movement buttons. The
prompt STORED will be displayed briefly.
The channel will be stored according to the
program number of your choice. You can
tune and store in memory other channels the
same way. In the event that you wish to exit
the channel settings menu for any reason,
simply press the EXIT button.
displayed on the screen to your
desired quality. Under normal circumstances,
you will not require to use the Fine Tune
function. The AFC values of your television
will automatically adjust and lock themselves
to the channel. However, you might need
it in case the television transmitters do not
operate according to the standards. To store
in the memory the settings you have made,
select the Store tab and press the Right or
Left movement button.
Download from Www.Somanuals.c1om6. All Manuals Search And Download.
6.4.4-Program Table
After setting is complete, press the EXIT
button to exit the menu.
Press the MENU button. Move to the
PROGRAM TABLE tab by pressing the
Down movement button in Main Menu and
confirm your selection with the OK button.
Program Table menu will be displayed.
6.4.4.3-Skipping a stored channel
In the event that you do not wish
to see certain programs while
navigating through the channels
using the PR+/PR- buttons,
PROGRAM TABLE
then you can use this function. Select the
program that will be hidden by pressing the
up/down or right/left movement buttons.
“Press the “RED” button. The name of the
program to be skipped shall appear in red.
You may perform this procedure for more
than one program. To view the skipped
program, directly enter the program number
using the numeric buttons. To cancel the
program skipping process, press again the
“RED” button. After setting is complete,
press the EXIT button to exit the menu.
00
05
10
11
12
13
14
01 CHANNEL 06
02 CHANNEL 07
03
04
08
09
SKIP
NAME
DELETE
MOVE
SELECT
BACK
6.4.4.1-Switching the locations of the
stored channels
Select the program you would like
to relocate by pressing the Up/
Down or Left/Right movement
buttons. “Press the “GREEN”
button. Green will blink. Move to
the other program you would like to
relocate by pressing the up/down
or right/left movement buttons.
“Finish the relocation process by
pressing the “GREEN” button.
6.4.4.4-To name the channels
You can assign your program or
programs of choice the names that
have a maximum of five characters.
Select the program you would like
to name from the Program Table by
pressing the up/down or right/left
movement buttons. “Press the “YELLOW”
button. An empty space appears beside
the channel for which you would like to
specify name information. Here, choose the
desired letter, number or sign using the up/
down movement buttons. For the second
character, press the right movement
button and then select the desired letter,
number or sign again with the up/down
movement buttons. After entering all the
characters, store the name you have written
in the memory by pressing the “YELLOW”
button. To write names for any of the
other programs, simply repeat the above
procedure. If you want to exit the menu,
simply press the EXIT button. If the program
is not named, then the channel number of
that program will be displayed automatically.
The channel in the first program
number you selected has been
moved to your second selected
program number and the channels between
both program numbers have been shifted to
the initially selected program number. After
setting is complete, press the EXIT button to
exit the menu.
6.4.4.2-Deleting a stored channel
Select the program you would like
to delete by pressing the up/down
or right/left movement buttons.
“Press the “BLUE” button. The
blue button on the menu will blink
for approval. “You may perform the deletion
process by pressing the “BLUE” button
or you may abort the deletion process by
pressing the MENU button. “Once you pres
the BLUE button, the selected program
is deleted and the following channels are
transferred to after this program number.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Settings of Your New Television
7.1- Sound Menu Settings
7.1.4-AVL (Automatic Volume Limiting)
You may perform volume settings by
using the VOL+ or VOL- buttons on
your television or the VOL+/VOL-
buttons on your remote control. You
can perform other Sound settings by
entering the Sound menu. For this,
press the MENU button on your
remote control. Select SOUND by
pressing the Up/Down movement
buttons from the main menu and press the
OK button. The Sound menu is displayed.
SOUND
Television transmitters have different sound
levels. This can be noticed as high and low
volume levels in different channels while
switching from one program to another. Using
the Left/Right movement buttons, select ON.
The AVL (Automatic Volume Limiting) function
maintains the same sound level as you switch
from program to program. Select OFF to
cancel it.
7.1.5-Headphones
By connecting headphones to your television
you can listen to the program sounds
VOLUME
independently from your television. To turn up
and down the headphone volume level, select
HEADPHONE tab from the Sound menu and
adjust the volume level by using the Left/Right
movement buttons. When you want to hear the
sound from the headphone only, just press the
MUTE button on your remote control.
BALANCE
SOUND TYPE
STEREO
SOUND MODE
AVL
EQUALIZER
HEADPHONE
NORMAL
OFF
CHANGE
BACK
7.1.6-SRS TruSurround Sound
You can select the tab which you
want to process with the Down
movement button and set its level
with Left/Right movement buttons.
This is the virtual sound technology. With
TruSurround, 6 different channels of the
digital sound are processed in two channels
and conveyed to the audience through two
speakers. TruSurround system is used to
create a virtual surround sound effect in
environments where there is no 4.1 or 5.1
speaker systems exist.
7.1.1-Balance
To adjust the sound balance between the
right and left loudspeakers to the desired
level, select the BALANCE tab in the sound
menu by using the Down movement button.
Using the Left/Right movement buttons
adjust this option to the desired level.
TruSurround is a registered
trademark of the SRS Labs. Inc.
TruSurround XT technology is covered
under the license of SRS Labs. Inc.
SRS
7.1.2-Sound Type
TruBass
ON
ON
The program you watch may be broadcast
in stereo or in two different languages.
Using the Right/Left movement buttons in
this menu, you can select Mono/Stereo or
Dual-I/Dual-II languages. Note this is only
when using Analogue TV. This feature is not
normally used in UK.
Dialog Clarity
BACK
CHANGE
7.1.3-Sound Mode
7.1.6.1-TruBass
Sound mode can be set as NORMAL or
SPATIAL by means of direction buttons.
Spatial option gives depth to the sound of
the program.
TruBass system is a signal processing
technology that reinforces the bass sounds.
Download from Www.Somanuals.c1om8. All Manuals Search And Download.
PICTURE
7.1.6.2-Dialog Clarity
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
DNR
COLOUR TEMP.
MPEG NR
ACTIVE CONTRAST
BACKLIGHT
This feature enhances the understandability
of the speeches in dialogues.
Note:When the SRS is set to ON, AVL and
EQUALIZER functions will automatically be
set to Off.
HIGH
NORMAL
LOW
OFF
7.1.7-Equalizer
CHANGE
BACK
Select the EQUALIZER tab in the Sound
menu and confirm with the OK button. The
Equalizer menu is displayed.
You can select the desired setting by
pressing the Up/Down movement
EQUALIZER
buttons and adjust their levels with Right/
Left movement buttons. You can adjust
BRIGHTNESS, CONTRAST, COLOUR
and SHARPNESS levels as you desire.
The changes you have made in the picture
settings will be stored in the memory without
requiring any other operations.
MUSIC
SPORTS
CINEMA
SPEECH
USER
BACK
CHANGE
7.2.2-DNR (Noise reduction)
You may reduce interference and noise
formed in the picture by using this feature.
Select DNR tab in the Picture menu with the
Up/Down movement buttons to activate
this feature and select one of the OFF,
LOW, MID or HIGH options with Left/Right
movement buttons.
Using the Left/Right, Up/Down movement
buttons, you may select either one of the
preset MUSIC, SPORTS, CINEMA and
SPEECH options which enhance the sound
effect depending on the feature of the
program you are watching or the USER
option which you can adjust as you desire.
To adjust the User option, select USER
and press the Right movement button. You
can adjust the frequency levels with the Up/
Down movement buttons. You can select one
of the 120Hz, 500Hz, 1.5KHz, 5KHz and
10KHz frequency bands with Right and Left
movement buttons. Press the MENU button
to store the settings and exit the user option.
You may exit the equalizer menu by pressing
the MENU button again.
7.2.3-Colour Temperature
You can adjust the colour temperature with
this feature. Move to the Colour Temperature
tab in the Picture menu by pressing the
up/down movement buttons and select
WARM, COOL or NORMAL by pressing
the right/left movement buttons.
7.2.4-Tint
When NTSC video is input via Scart, you
may make Hue settings. The tint option is
not seen in the menu when you have not
input this type of a video. When a NTSC
video is connected via the Scart, this option
becomes active and it is available in the
menu.
Note: You can select the equalizer options
directly by pressing the ( ) button on your
remote control.
7.2-Picture Menu Settings
7.2.1-Picture Menu
7.2.5-Active Contrast
You can perform other picture
settings by entering the Picture
menu. For this, press the MENU
button on your remote control. Select
PICTURE by pressing the Up/Down
movement buttons from the main
menu and press the OK button. The
Picture menu will be displayed.
This feature allows making brightness
settings according to the picture. A brighter
or dimmer picture can be sent to the screen
according to the brightness level of the
picture. Thus, a wider effect is obtained in
terms of contrast.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2.6-Backlight
7.2.9.1-Auto
With this feature, you can adjust the intensity
of light reflected to the LCD Panel. Select
Backlight by pressing the Up/Down
movement buttons and adjust the desired
level by pressing the right/left movement
buttons.
Some movie channels may broadcast in
the 16:9 format. If you would like to see this
format automatically, then select AUTO.
In that case, AUTO 16:9 appears on your
screen.
Note: If your TV is equipped with Active
Contrast feature and this feature is set to On,
then Backlight tab is not displayed in the
menu.
7.2.9.2-16:9
7.2.7-MPEG NR
Please use this setting for watching wide
screen DVDs, wide screen video cassette
or 16:9 formatted broadcasts. Since various
screen formats such as 16:9, 14:9 and etc.
are used, black stripes might be formed on
the lower and upper parts of the screen.
You may remove the artifacts that
appear in the picture as square shaped
blocks by using this feature except in
the Tuner mode.Select Mpeg NR tab
from the Picture menu with the up/down
movement buttons to activate this feature
and select one of the OFF, LOW, MID or
HIGH options with right/left movement
buttons.
Note:MPEG NR feature appears in the menu
for all sources except the Tuner mode.
7.2.9.3-14:9
7.2.8-Picture Smart
This is a movie format.
You can select either one of the
three non-adjustable settings in the
memory or one of the user options
by pressing the “( )“ button on
your remote control. SOFT, NATURAL,
RICH are default values; USER represents
the values you stored in the memory.
7.2.9.4-4:3
7.2.9-Picture Format
Use this setting to watch the broadcasts in
the 4:3 format.
With this option, you can view the
broadcast you watch in a format
of your choice. You may view
broadcastings in either AUTO,
16:9, 14:9, 4:3, LETTERBOX, SUBTITLE
or PANORAMA formats. 16:9, 14:9 or 4:3
formats can be selected in PC modes. In
that case, the name of the selected picture
format will be displayed in the centre of the
screen.
7.2.9.5-Letterbox
While watching a “16:9 or Cinemascope
formatted” film or video cassette, this setting
will eliminate or minimize the black stripes on
the background by zooming in the picture
without diffusing it.
Note: In PC Mode, 4:3, 16:9 and 14:9
picture formats are supported in 16:9
panels. Only 4:3 picture format is supported
in 4:3 panels.
Download from Www.Somanuals.c2om0. All Manuals Search And Download.
7.2.9.6-Subtitle
7.3.1-Timer
If the subtitles are transmitted in the “16:9
formatted” broadcast, then this setting will
push the picture upwards in order to ensure
the entire written text to be seen.
Your television is equipped with the feature
of being able to be turned off and on at
periods that you specify. Select TIMER by
pressing the Up/Down movement buttons
and press the OK button in order to have
your TV turned off at the end of a desired
period. The Timer menu will be displayed.
TIMER
CLOCK
ON TIME
OFF TIME
ON TIMER LİST
SOURCE
13 : 04
- - : - -
- - : - -
DIGITAL
P001
7.2.9.7-Panorama
This setting will enlarge the image to fit the
screen by stretching the image horizontally
while holding the correct proportions at the
centre of the image. Some distortion may
occur.
BACK
CHANGE
Time data is obtained from Teletext; if no time
data is available then select TIME with the
up/down movement buttons and enter the
current time with numeric buttons. Select the
ON TIME and OFF TIME for television in the
same manner and specify the time. Enter the
program number you desire or the external
source with the AV button into SOURCE
tab to specify the channel or source from
which you would like the TV to be turned-on
to. At the end of the time you specified, your
television will automatically switch to stand-by.
If the on time for TV is specified in the Menu,
the TV will switch to the selected program or
to the external source at that time; if the TV is
in standby mode, then it will be turned on with
the selected channel or external source.
Note: Since the use of certain functions
in order to change the picture sizes for
collective projection or commercial purposes
(modifying the height and width etc.) will
be deemed an infringement of the picture’s
copyright, legal proceedings can be carried
out as required under relevant laws.
7.3-Features Menu Settings
Press the MENU button on your
remote control. Select FEATURES
tab by pressing the Up/Down
movement buttons and press the
OK button. The Features menu will
be displayed.
7.3.2-Child Lock
If this feature is turned On, the program
FEATURES
currently being watched becomes locked,
the image and sound goes off and the locked
symbol appears on the upper left corner of the
screen. The locked channel is skipped when
you channel search with PR+, PR- buttons.
TIMER
CHILD LOCK
ACTIVE ANTENNA
AUTO SCART
DIGITAL FEATURES
OFF
OFF
ON
Note: Child lock feature is for Analog mode
only. Child lock tab does not appear in the
menu in Digital mode.
BACK
SELECT
7.3.3-Active Antenna
You can select the titles for which you would
like to perform an operation in Features
menu by using the Up/Down movement
buttons.
When switched ON in the menu it will provide
5V DC via the aerial socket and can be used
to supply aerials with mast head amplifiers
included that require a DC supply.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP screen when HDMI1 is displayed on the
main screen.
Note 3: Right and left movement buttons do
not control the volume in PIP, PAP and PAT
modes. They can only be used to change
the source.
7.3.4-Auto Scart
When this feature is set to On and when you
operate an external device that is connected
to your LCD television via scart, TV will
automatically switch to AV mode where
the device is connected. When it is set to
Off, your TV does not switch to the external
device automatically.
7.4.3.1-PIP Position
With this option, you can change the display
position of the PIP screen. You can change
the position of the PIP screen in clockwise
by pressing the Pos button when there is a
PIP picture on the screen.
7.4-Other Picture Features
7.4.1-Zoom
Press the ZOOM button on your
remote control while watching a
channel to activate this feature.
During the zooming process, the
image is zoomed in in three stages
oriented to the centre. To move the
picture in this mode, you can use
Up/Down or Right/Left movement
buttons on your remote control.
Note: Zoom mode does not function
with COMP/HDMI/PC inputs. Zoom
mode is aborted when the channel is
changed or Teletext is activated.
7.4.3.2-PIP Size
With this option, you can increase and decrease
the size of the PIP window. You can change the
PIP size by pressing the Size button when there
is a PIP picture on the screen.
7.4.2-Freeze (Freeze picture)
You may freeze the program
picture you are watching with this
feature. For this, press the FREEZE
button on your remote control. The
program picture will freeze until the same
button is pressed a second time.
7.4.3.3-Switching the locations of the
Main screen and PIP screen
When a sub window is open in front of the
main window, you can switch the locations of
the main window and sub window by pressing
the SWAP button on your remote control.
7.4.3-Using PIP Feature (Picture in
Picture)
Press the PIP button on your remote control.
PIP screen is displayed. Depending on the
selected source, a window will be opened
in the main picture and a sub screen will be
displayed. You can switch to PAP mode
by pressing the PIP button again. You can
return to the TV mode by pressing the PIP
button when you are in the PAP (Picture and
Picture) mode. You can use Right/Left
buttons to change the source in the PIP
screen when you are in the PIP or PAP
mode. You can use Up/Down buttons to
change the channels.
7.4.4-PAT Mode
With this feature, you can follow the
teletext broadcasts simultaneously with the
current program, provided that the current
program contains teletext broadcast. For
this purpose, when you press TXT and
then 16:9 buttons in a channel with teletext
broadcasting, the screen will be split into
two with the left pane showing the currently
watched program and the right pane will
show the Teletext at the same time. In the
event that you wish to exit the PAT mode for
any reason, simply press the 16:9 button.
Note 1: Two different channels from the
Tuner can not be viewed in the PIP screen.
Only inputs from an external source can be
viewed in the PIP screen.
Note 2: HDMI2 can not be selected in the
Download from Www.Somanuals.c2om2. All Manuals Search And Download.
Teletext
8
To be able to receive a quality teletext
broadcast, a good aerial system and a
broadcast signal that is not weak, with
no reflections and interference from other
channels are required. Even in a very clear
reception, it is normal for some characters
or tabs to be lost. Such conditions will
automatically be improved in a short time
under normal circumstances.
8.3-Teletext image in the TV picture
(MIX)
With this feature, you can watch
the teletext information and the TV
broadcast together. Thus, you can
follow the teletext broadcast of the
channel while you watch the TV
broadcast. To do this, press TXT
button in a channel with Teletext broadcast.
8.1-Entering the Teletext Mode
8.4-Page enlarge button (DOUBLE)
In a channel that does not have the
Teletext feature, “NO TEXT” will
Using this button, you can watch
the top half of the teletext page in
an enlarged format. To be able to
view the bottom half of the enlarged
page, press the same button for the second
time. Once you press the same button the
third time, the page will be restored to its
normal size.
be displayed when you press the
TXT button. In order to switch your
television to the teletext broadcast,
please press the TXT button in a program
that has a teletext broadcast. To switch back
to the television broadcast, press the same
button for a second time. Once you have
switched to the teletext broadcast, the initial
page that appears will be the index page.
P100 In this page, the titles of the topics in
the teletext broadcast and the initial page
numbers will appear.
8.5-Page Stop (HOLD)
Some information is laid out
by the broadcasting agency in
multiple pages and it is broadcast
in an automatic cycle mode. For
8.2-Page Selection
example, on a text of four pages, the pages
are indicated with the figures 01, 02, 03
and 04 on the bottom of the page. To view
one of these pages for a longer time, press
the FAV button. When you press the same
button again, the cycle continues.
To be able to view the page you
would like on the screen, type in
the number of that page using the
numerical keys. You can see the
number you have entered on the left
side of the upper title tab. When you
would like to turn the pages one by
one, you can go to the next page
pressing the up button and to the
previous page pressing the down
button. Press the INFO button to
return to the Index page.
8.6-Subpage selection (SUB)
If the page of text you are viewing
contains sub pages the page
numbers starting from 01 appear on
the screen. You can switch to the
sub pages with the SWAP button.
In that case, the sub page tab is
displayed on the bottom line within
“Red -” and “Green +” frames.
“You can select the sub pages by
pressing the “RED” and “GREEN”
buttons. You can exit the subpage
by pressing the SWAP button again.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
8.7-Temporary TV Picture (UPDATE)
8.9-Clock
This button allows you to switch
to the television picture while the
page you want is being searched
in the teletext broadcast eliminating
the need to wait during the search.
You may switch to the television
picture by pressing the ( ) button
while Teletext is searching for your
desired page. Once the page you want is
found, the number of that page appears on
the screen.
The Clock function of the SIZE
button; press the SIZE button when
you want to check the time while
watching any television channel. In
that case, a clock will appear for
a few seconds on the lower right
corner of the screen.
8.10-Fastext
The coloured buttons on the remote control
are for the fastext feature. When you select
any page, the titles on various subjects may
appear on the screen in four different colours
or inside coloured frames (red, green, yellow
and blue). By pressing the button pertaining
to the relevant colour on the remote control,
you can access the subject of your choice
without waiting.
8.8-Question - Answer Button
(REVEAL)
Sometimes, a teletext page
contains a hidden answer such
as a game or a riddle. Press the
EPG button to disclose the hidden
answer.
Download from Www.Somanuals.c2om4. All Manuals Search And Download.
9
External Equipment Connections:
Your TV is equipped with 10 inputs including aerial input, which allows for the
external device connection. These inputs are:
1-Aerial input
2-SCART1 input
3-SCART2 input
4-AV input
5-S-Video input
6-PC input
7-HDMI1 input
8-HDMI2 input
9-YPbPr Component input
10-CI input
You can connect your external device to your TV via these inputs. By pressing the
AV button on your remote control, select the external source input to which you
connected your device.
9.1-Headphone Connection
Side view of TV
The headphones must have
impedance between 8 and
32 ohms and have a 3.5
mm stereo jack plug. Plug
the headphone jack into the
headphone socket of the TV.
9.2-Connecting an external equipment via Scart connection
VCR
or
or
DECODER
DVD
SCART : To watch the picture of the
broadcast device connected to SCART,
select Scart from the Source menu and
press OK button. (You can watch via
this Scart if the connected device has a
RGB output).
SATELLITE RECEIVER
GAME CONSOLE
25
Download from Www.Somanuals.com. All Manuals Search And Download.
9.3-Connecting external equipment via AV connection
Side view of TV
CAMERA
DECODER
DVD
AV : To watch the picture of the broadcast
device connected using the Phono input, select
AV option from the Source menu and press
OK button. Your TV will switch to the selected
source.
SATELLITE RECEIVER
GAME CONSOLE
9.4-Connecting external equipment via S-Video connection
Side view of TV
CAMERA
DECODER
DVD
S-Video: To watch the picture of the broadcast device
connected using the SVHS input, select S-Video option
from the Source menu and press OK button. Your TV
will switch to the selected source.
SATELLITE RECEIVER
GAME CONSOLE
9.5-Connecting external equipment via YPBPR connection
Rear view of TV
Picture connection
DVD
Sound connection
YPBPR (Component Input): When a connection is made via YPBPR socket,
select YPBPR option from the Source menu and press the OK button to display
the picture. Your TV will switch to the selected source.
Download from Www.Somanuals.c2om6. All Manuals Search And Download.
9.6-Connecting an external equipment via HDMI connection
DVD
Side view of TV
SATELLITE RECEIVER
GAME CONSOLE
HDMI: When a connection is made via HDMI socket, select the HDMI input you
connected through from the Source menu and press the OK button to be able to
display these pictures. Your TV will switch to the selected source.
Connect to the HDMI input at the back of your TV by using the connector located on
your PC or your digital video-transmission device with a suitable cable (not supplied
with the TV).
Note: To be able to watch an image in the HDMI mode, your computer must be
equipped with a HDMI graphic card.
You may display the resolution information by pressing the INFO button.
9.6.1-HDCP (HD Copy Protection)
Your TV supports HDCP feature. If the HDMI source (HD DVD) is not compatible
with HDCP standards it may result in no picture or sound.
NOTE:In HDMI mode; some resolutions are supported when a DVI to HDMI
converter cable from a PC is used. Only 16:9, 4:3, 14:9 (some definitions) are
supported as picture format.
Full HD
This TV is Full HD. This means that you can view high quality Full HD pictures via the
HDMI socket or component input when using an HD source such as an HD DVD or SKY
HD BOX.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
9.7-PC VGA connection
Picture connection
Sound connection
Rear view of TV
9.7.1-PC Connection:
Connect the D-Sub15 connector to the PC-IN socket at the back of your television
by using an appropriate cable (not supplied with your television). Again, by using
an appropriate cable, connect the audio output of your PC to the PC AUDIO-IN at
the back of your television to listen to sounds from your PC and you can adjust the
volume level of your source by using VOL+/VOL- buttons.
9.7.2-Switching to the PC mode
For your LCD-TV to switch to the monitor (PC) mode, press the AV button on your
remote control. SOURCE menu will be displayed. Select PC option by pressing the
Up/down movement buttons and press the OK button.
9.7.3-PC Setting
Enter into the Setup menu from the main menu by pressing the MENU button in
the PC mode. In order to make the necessary settings in this menu, you can select
the tabs with the up/down buttons on your remote control to make the following
relevant settings.
9.7.4-AUTOCONFIGURATION
The most suitable geometric settings in accordance with the entry mode are
configured by this function. For this operation, just select the Autoconfiguration
tab and press OK button.
9.7.5-HORIZONTAL POSITION: Horizontal position setting.
9.7.6-VERTICAL POSITION: Vertical position setting.
9.7.7-CLOCK FREQUENCY: This is the pixel clock frequency. User can narrow
down or enlarge the display by selecting a desired value.
9.7.8-PHASE: Using the right/left movement buttons, you can ensure that the
colours and shapes are exactly consolidated on the PC image.
9.7.9-PICTURE FORMAT
You can select the PC image to be displayed in 16:9 or 4:3 formats.
Download from Www.Somanuals.c2om8. All Manuals Search And Download.
9.8- How To Connect CI (Common Interface) Card
1- To wiew the scrambled (pay) services in digital TV mode.
TO INSERT A CI CARD
(NOTE: The card on its own cannot be used on this TV. A CAM (Conditional Access
Module) must be purchased and the card inserted into the CAM. The CAM / card
holder is then inserted into the CI slot on the TV.)
Insert the CAM / holder card into the slot in the direction of the arrow until it is fully
located.
TO REMOVE A CI CARD
When removing the CI card, make sure you pull out the CAM complete with the
card fitted.
This function enables you to watch the scrambled services (pay services) in some
channels. If you remove the CI Module, you can only watch the available non
scrambled digital programmes.
2- Press the Standby button on the remote to turn on the TV.
3- Press the INPUT button on the remote to display the Source List. Use the Up/
Down buttons to select DTV, and press the OK button.
4- If the CI card is inserted properly, the CI MODULE will briefly be displayed on
screen, The contents are dependent on the CAM provider in you country.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Help and tips
Failure
Possible cause
Solution
Is the power cord connected to the
mains supply?
Check the power cord.
The television does not function
Is the On/Off button on?
Check if the On/Off button is on.
Is the aerial cable connected?
Check the aerial cable.
Aerial may be affected by two
connected external devices.
Try disconnecting one of the devices.
Perform fine tuning.
Poor picture quality (analogue TV)
It may need fine tuning.
Picture settings are not correct.
Channel setting
Adjust Brightness, Contrast and
Colour.
Perform automatic, manual channel
setting or fine tuning.
Shadow and reflection in the
picture.(analogue TV)
Aerial misaligned
Check aerial direction
Is there any damage to the aerial or
cable?
Check and replace the aerial and or
cable.
No picture
No colour.
Are you sure you pressed the correct
button on your remote control?
Press PR+ or PR- button to turn on
the TV.
Colour intensity level is at the lowest
setting.
Lighten the colour.
Problem in channel broadcasting.
Television channel (no teletext) or
Very weak signal
Test with another channel.
Test another channel for fine tuning
and shadowy pictures
No or defective teletext
No sound
Check the aerial system.
Temporary sound mute may be on
Is the sound turned down?
Are the batteries correctly placed?
Are batteries exhausted?
Try pressing the mute button
Turn on the volume with Vol + button.
Place the batteries correctly.
Replace the batteries with new ones.
If yes, remove it.
Remote control does not work
Is there any obstacle between the
remote control and television?
Picture is not visible after turning
on the TV
Child lock is active.
Disable the child lock.
If your television does not work properly even though you tried the above mentioned
solutions, try turning it on and off again. If you cannot start your television even though you
have applied all noted methods, refer to the dealer from where you purchased the product.
Never attempt to repair a faulty device yourself.
Download from Www.Somanuals.c3om0. All Manuals Search And Download.
11 Technical specifications chart
SCREEN SIZE
32”
32”, 16:9 Active
matrix TFT
Panel type
Sound output
2 x 10 W
140 W
<1 W
250
Power consumption
Stand by power value
Teletext page
Loudspeaker impedance:
Scart 1
8 Ohm
STD
Scart 2
STD
Audio/Video PHONO(Input)
S-Video socket
STD
STD
YUV (Video/Sound)
Component Input
STD
HDMI 1
STD
STD
HDMI 2
VGA Input
STD
PC Audio Input
SPDIF Digital sound output
Headphone socket
Dimensions (WxDxH)
Weight (Kg)
STD
STD
STD
800x200x594
11,9
STD: Standard
General technical specifications
Power supply AC:
Program memory Analog:
RF Aerial input:
230V 50 Hz
100
75 Ohm (Co-axial)
Mono/Stereo/Nicam
2xUM - 4, IEC R03 or AAA 1.5V
VHF (Band I Channel 2-4)
VHF (Band III Channel 5-12)
UHF (Channel 21-69)
Cable TV (S1-S20/S21-S41)
PAL BG
Sound systems:
Batteries:
Channels received:
Broadcasting systems received
PAL SECAM BG
PAL SECAM BG DK
PAL SECAM BG LL’
PAL I
Note: Your television has been manufactured in accordance with the system available in
your country and this system cannot be changed by the user except as described below:
In countries where BG/DK and BG/LL’ broadcasts are made (BG or DK / BG and LL’). For
further information, see the settings section for your television.
Design and specifications may be changed without prior notification.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
12 MAIN UK TRANSMITTER STATIONS
UHF CHANNELS
BBCI BBC2 ITV CH4 CH5
STATIONS CT D
BBCI BBC2 ITV CH4 CH5 Map
Regional Main stations
North West
Caldbeck
Map
30
55
68
34
62
66
28
59
48
32
65
56
56
48
56
12
15
45
Bluebell Hill
Crystal Palace
Dover
Oxford
East
Sandy Heath
Sudbury
Tacolneston
Scotland
Angus
40
26
50
49
46
33
56
52
43
23
66
64
65
30
53
67
29
28
30
31
Winter Hill
37
Douglas (IOM)
North
Belmont
Emley Moor
North East
Bilsdale West Moor
Chalton
Pontop Pike
Midlands (West)
Ridge Hill
Sutton Coldfield
The Wreckin
Mindlands (East)
Waltham
South West
Beacon Hill
Caradon Hill
Huntshaw Cross
Redruth
Stockland Hill
Channel Islands
Fremont Point
West
Mendip
South
Hannington
Midhurst
Rowbridge
22
44
28
51
25
47
32
41
56
37
17
16
31
51
62
27
44
55
24
41
59
21
47
65
39
35
52
25
26
24
33
39
58
26
45
64
29
49
61
23
42
54
35
14
11
13
56/58
57
40
31
33
22
33
40
33
39
31
55
63
46
27
26
28
26
46
26
45
27
62
60
43
24
23
25
23
43
23
49
24
59
53
50
21
29
32
29
50
29
42
21
65
37
37
48
35
67
6
8
7
9
5
49
1
4
3
2
10
Black Hill
Cragkelly
Darvel
22
46
26
28
40
33
25
43
23
32
50
29
35
37
25
23
22
20
Durris
Eitshal (Lewis)
Keeylang Hill
Knock More
Rosemarkie
Rumster Forest
Selkirk
Wales
Blaenplwyf
Carmel
58
64
61
54
35
21
57
22
55
51
33
63
28
62
44
26
60
25
59
41
23
53
32
65
47
29
37
38
40
39
36
67
37
52
56
31
57
57
52
46
44
27
63
63
45
40
51
24
60
60
49
43
41
21
53
53
42
50
47
44
42
19
18
43
41
51
58
44
64
41
61
47
54
Uanddona
Moel-y-Parc
Presely
37
35
35
37
Wenvoe
39
61
31
45
55
24
42
58
27
66
68
21
34
32
33
N.IRELAND
Brougher Mountain
Divis
22
31
55
28
27
62
25
24
59
32
21
65
37
31
47
46
48
Limavady
Download from Www.Somanuals.c3om2. All Manuals Search And Download.
13 Guarantee - Television
Your new television is guaranteed against the cost of breakdown repairs for twelve
months from the date of the original purchase.
What is covered?
• All repairs necessary as a result of faulty materials,defective components or
manufacturing detect.
• The cost of all functional replacement parts,excluding remote control batteries
• The labour costs of a Beko approved repairer to carry out the repair
• You may be offered a replacement instead of repair under guarantee.
You dealer will advise you.
What is not covered?
• Transit or delivery damage
• Accidental damage
• Misuse, or abuse.
• Cabinet or appearance parts,including knobs and flaps
• Remote control batteries.
• Repairs or replacements required a a result of unauthorised repairs or inexpert
installation that fails to meet the requirements contained in the user instruction book.
• Repairs or replacements to product installed or used on commercial or non-
household premises.
Important notes.
• The product is guaranteed for domestic household use only.
• The guarantee will be void if the product is installed or used in commercial or non-
household premises.
• The product must be correctly installed and operated in accordance with the
instructions contained within the Operating Instructions Booklet provided with the
product.
• The guarantee is given only within the boundaries of the United Kingdom and the
Republic of Ireland.
• The guarantee is not transferable if the product is resold.
• Beko Plc disclaims any liability for incidental or consequential damages.
• The guarantee does not in anyway diminish your statutory or legal rights.
Beko House,Caxton Way,Watford,Herts,WD18 8UF,Tel: 0845 600 4911
33
Download from Www.Somanuals.com. All Manuals Search And Download.
13 HOW TO OBTAIN SERVICE
Congratulations on your choice of a Beko colour television.Your new television has been
designed and manufactured to the highest quality stadards to give you many years of
use.To get the best out of it,please take a few moments to read the instruction book.
Your television is supplied with a full 12 months guarantee,covering parts and labour.
Should you require service under guarantee,simply call the number below (**see note for
small screen sets)
0845 600 4911
Our service receptionist will ask you for your product model number,your retailer’s
name,and the date of purchase when you call.It will assist you if you complete the box at
the bottom of this page when you take delivery of your television so that the information
is readily available should you need it. If it is necessary for an engineer to visit your home
he will normally be there within 48hrs of receipt of your call (excluding Bank Holidays) or
at your earliest convenience.
Before telephoning for service please check the trouble shooting guide in the instruction
book as often minor problems are easily identified and resolved by following the
instructions contained there in.Service visits where there is no fault with the product
could incur a charge even through the product is under guarantee.
Service is also available on the above number after the guarantee period has expired.The
cost of any repairs outside of the guarantee period is payable to the engineer at the time
of visit.
Please complete the box below for ease of reference later.
Model Number
Serial Number
Date of Purchase
Place of Purchase
Please keep your purchase receipt.The engineer will need to see it should you require service under
the 12-month Guarantee.
***Special Note:
In home repair servicie is not available on models with a screen size of 21” or under.You
should contact your retailer for advice and assistance on these models..
Download from Www.Somanuals.c3om4. All Manuals Search And Download.
V9Z.801
Download from Www.Somanuals.com. All Manuals Search And Download.
|