Condenser
Sensor Dryer
Dry & Save
DPU 8360 W
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Main programmes .............................19
Additional programmes .....................19
Auxiliary functions..............................22
Warning symbols...............................22
Starting the programme.....................24
Progress of programme.....................24
Child-proof Lock................................24
Changing the programme after it has
started...............................................24
Cancelling the programme.................25
End of programme ............................26
1 Dryer
4
Overview .............................................4
Technical specifications .......................5
2 Important safety
instructions
6
General safety .....................................6
Intended use .......................................8
Children's safety..................................8
3 Installation
9
Appropriate installation location ...........9
Removing the transportation safety
7 Maintenance and cleaning 27
Lint Filter / Loading Door Inner Surface27
Cleaning the sensors ........................27
Draining the water tank......................28
Cleaning the filter drawer ..................28
Cleaning the evaporator.....................30
assembly.............................................9
Under counter installation ....................9
Mounting over a washing machine.....10
Connecting to the drain .....................10
Adjusting the feet...............................10
First use ............................................11
Disposing of packaging material ........11
Transportation of the product.............11
Disposing of the old product..............11
Warnings about sounds.....................11
8 Troubleshooting
31
9 Guarantee
33
What is covered?...............................33
What is not covered?.........................33
Important notes.................................33
4 Electrical Connection
13
Attention!...........................................13
Electrical requirements.......................13
Fitting a different plug .......................13
Washer/dryer combination.................14
10 Service
34
5 Preparations for drying
15
Things to be done for energy saving..15
Laundry suitable for drying in the
machine ............................................15
Laundry unsuitable for drying in the
machine ............................................15
Preparing laundry for drying...............16
Correct load capacity ........................16
Loading the laundry...........................16
6 Selecting a Programme and
Operating Your Machine
18
Preparing the machine.......................19
Programme selection.........................19
Download from Www.Somanuals.com. All Manuals Search And Download.
3 EN
1 Dryer
Overview
11
10
1
2
9
8
3
4
5
7
6
1. Top panel
7. Kick plate
2. Control panel
3. Loading door
4. Kick plate opening tab
5. Ventilation grids
6. Adjustable feet
8. Type label
9. Lint filter
10. Water tank drawer
11. Power cable
Download from Www.Somanuals.com. All Manuals Search And Download.
4 EN
Technical specifications
Height (adjustable)
84.6 cm
59.5 cm
59.8 cm
8 kg
Width
Depth
Capacity (max)
Weight (net)
49 kg
Voltage
Power
See type label
Main Model Code
Type label is behind the loading door.
Specifications of this appliance may change without notice to improve the quality of the
product. Figures in this manual are schematic and may not match your product exactly.
Values stated on the machine labels or in the documentation accompanying it are
obtained in laboratory in accordance with the relevant standards. Depending on
operational and environmental conditions of the appliance, values may vary.
Download from Www.Somanuals.com. All Manuals Search And Download.
5 EN
2 Important safety instructions
This section contains safety instructions
that will help protect from risk of personal
injury or property damage. Failure to
follow these instructions shall void any
warranty.
checked by a qualified electrician or
the Authorized Service Agent. Our
company shall not be liable for any
damages that will arise when the
product is used without grounding in
accordance with the local regulations.
The product should not be plugged
in during installation, maintenance,
cleaning and repair works.
Always have the repair procedures
carried out by the Authorized Service
Agent. Manufacturer shall not be
held liable for damages that may
arise from procedures carried out by
unauthorized persons.
General safety
•
•
•
Never place the product on a carpet-
covered floor; otherwise, lack of
airflow beneath the machine will
cause electrical parts to overheat.
This will cause problems with your
product.
•
•
Do not operate the product if the
power cable / plug is damaged. Call
the Authorized Service Agent.
Do not make any changes on the
plug supplied with the product. If it is
not compatible with the socket, have
a qualified electrician change the
socket with a suitable one.
•
•
Do not use electrical devices in the
product.
You must provide enough ventilation
in order to prevent gases exiting from
devices operating with other types of
fuels including the naked flame from
accumulating in the room due to the
back fire effect.
Items cleaned or washed with
gasoil/fuel oil, dry-laundry solvents
and other combustible or explosive
materials as well as the items that are
contaminated or spotted with such
materials should not be dried in the
product since they emit flammable or
explosive vapor.
Do not dry the laundry cleaned with
industrial chemicals in the dryer.
Underwear that contains metal
reinforcements should not be dried in
the dryer. Dryer can get damaged if
metal reinforcements come loose and
break off during drying.
•
•
Never touch the plug with wet hands!
Never unplug by pulling on the cable,
always pull out by grabbing the plug.
Connect the product to a grounded
outlet protected by a fuse of suitable
capacity as stated in the technical
specifications table.
•
•
Power cable of this product is
equipped with a conductor and
a grounding plug that allows for
grounding the product. This plug
must be inserted into a socket
which is installed and grounded in
accordance with the local laws and
regulations. Grounding installation
decreases the risk of electric shock
by opening a path with low resistance
for the electricity flow in case of a
malfunction or failure. Do not neglect
to have the grounding installation
made by a qualified electrician.
If you have any suspect about
the grounding installation, have it
•
•
•
Never attempt to repair the product
yourself. Do not perform any
repair or replacement procedures
on the product even if you know
or have the ability to perform the
Download from Www.Somanuals.com. All Manuals Search And Download.
6 EN
required procedure unless it is
clearly suggested in the operating
instructions or the published service
manual. Otherwise, you will be
putting your life and others' lives in
danger.
For failures that you cannot remedy
by applying the procedures in safety
instructions, turn off and unplug
the product and call the Authorized
Service Agent.
dryer.
•
Items soiled with cooking oils,
acetone, alcohol, fuel oil, kerosene,
stain removers, turpentine, paraffin
and paraffin removers must be
washed in hot water with plenty of
detergent before being dried in the
dryer.
Garments or pillows bolstered with
rubber foam (latex foam), bathing
caps, water resistant textiles,
materials with rubber reinforcement
and rubber foam pads should not be
dried in the dryer.
•
•
•
•
•
Do not reach into the machine when
the drum is spinning.
Do not use extension cords, multi-
plugs or adaptors to connect the
dryer to power supply in order to
decrease the risk of fire and electric
shock.
Do not use fabric softeners and
anti-static products unless they are
recommended by the manufacturers
of the relevant product.
•
Never wash the product by spreading
or pouring water onto it! There is the
risk of electric shock!
•
•
Use softeners, anti-static products
and etc. in accordance with the
instructions of their manufacturers.
Do not install the product behind a
door with a lock, sliding door or a
hinged door which can strike the
product.
Do not install or leave the dryer in
places where it will be exposed to
outdoor conditions.
Your product can be operated at
temperatures between +5°C and
+35°C. If the operating conditions fall
outside of this range, operation of the
product will be adversely affected and
it can get damaged.
Do not tamper with the controls.
Unplug the product when it is not in
use.
Remove the loading door of
the drying compartment before
decommissioning or disposing of the
product.
Check all garments before loading
and make sure that there is no any
lighters, coins, metal pieces, needles,
and etc. in their pockets or on them.
The final step of the drying
programme, namely the cool-down
step is performed without applying
heat to ensure that the laundry items
are kept at a temperature that will
not damage them. If you open the
loading door before the cool-down
step completes, hot vapour will come
out.
•
•
ANever stop the dryer before the
programme completes. If you must
do this, remove all laundry quickly
and lay them out to a suitable place
to dissipate the heat.
•
•
•
•
Always clean the lint filter before or
after each loading. Never operate the
dryer without the lint filter installed.
Clean ventilation grid of the product
regularly. Do not allow fibre, dust
and dirt accumulation around the
ventilation grid and at adjacent areas.
Power cable plug must be within easy
reach after installation.
•
•
•
•
Do not dry unwashed items in the
Download from Www.Somanuals.com. All Manuals Search And Download.
7 EN
•
•
Make sure that the pets do not enter
into the product. Check the drum of
the product before using it.
Make sure that original spare parts
and accessories are used during
maintenance works.
to children. Keep the packaging
materials out of reach of children or
dispose them by classifying according
to waste directives.
•
•
Do not lean on the loading door when
it is open. The product may tip over.
When your machine is not in use
or when you unload the laundry
after completion of drying process,
turn the machine off with the On/
Off button. In cases where the On/
Off button is in On position (while
the machine is energized), keep the
loading door closed.
Intended use
•
This product has been designed for
domestic use. It should not be used
for other purposes.
•
Product must only be used for
drying of textiles that are marked
accordingly.
•
•
Dry only those articles in your product
that are stated in this manual.
This product is not intended to be
used by persons with physical,
sensory or mental disorders or
unlearned or inexperienced people
(including children) unless they are
attended by a person who will be
responsible for their safety or who will
instruct them accordingly for use of
the product.
Children's safety
•
Electrical products are dangerous for
the children. Keep children away from
the product when it is operating. Do
not let them tamper with the product.
Do not allow children sit/climb on or
enter in the product.
Do not forget to close the loading
door when leaving the room where
the product is located.
•
•
•
Packaging materials are dangerous
Download from Www.Somanuals.com. All Manuals Search And Download.
8 EN
3 Installation
such as long pile rugs or wooden
plinths.
Do not install the product behind a
door with a lock, sliding door or a
hinged door which can strike the
product.
Once the product is installed, it
should stay at the same place where
its connections have been made.
When installing the product, make
sure that the rear wall of it does
not touch anywhere (tap, socket,
etc.). Also pay attention to select an
installation location which you will not
be required to change afterwards.
Place the product at least 1.5
cm away from the edges of other
furniture.
To make the product ready for use,
make sure that the electricity and water
drainage system are appropriate before
installation. If they are not, call a qualified
technician and plumber to have any
necessary arrangements carried out.
•
•
CPreparation of the product’s location
as well as the electrical and waste
water installations is the customer’s
responsibility.
CManufacturer shall not be held
liable for damages that may arise
from procedures carried out by
unauthorized persons.
APrior to installation, visually check if
•
the product has any defects on it. If
so, do not have it installed. Damaged
products cause risks for your safety.
BDo not place the product on the
AThe appliance should be transported
power cable.
only in a vertical upright position.
If during the course of transport the
appliance has to be transported
horizontally, it must only be laid on
its right hand side. After bringing it
to upright position,it must not be
operated for at least 12 hours to
allow the system to settle.
Failure to comply with the above
instructions could result in damage
occurring to the appliance. The
manufacturer will not be held
responsible if these instructions are
disregarded.
Removing the transportation
safety assembly
ARemove the transportation safety
assembly before using the product for
the first time.
1. Open the loading door.
2. There is a nylon bag inside the drum
that contains a piece of styrofoam.
Hold it from its section marked with
XX XX.
3. Pull the nylon towards yourself and
remove the transportation safety
assembly.
Appropriate installation
location
•
•
•
•
Install the product on a stable and
level surface.
Dryer is heavy. Do not move it by
yourself.
Operate your product in a well
ventilated, dust-free environment.
Do not block the air ducts in front of
and under the product with materials
AMake sure that no part of the
9 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
transportation safety assembly
remains inside the drum.
Connecting to the drain
In products equipped with condenser
unit, water accumulates in the water tank
during the drying cycle. You should drain
accumulated water after each drying
cycle.
Under counter installation
•
This product can be installed under a
counter if the height of the counter is
sufficient.
You can directly drain accumulated water
through the water drain hose supplied
with the product instead of periodically
draining the water collected in the water
tank.
ANever operate the dryer without the
top trim is in place.
Dryer Depth
60 cm
54 cm
Stock
number of
under-bench 2979600100 2973600100
installation
part
•
Leave at least 3 cm of space around
the sides and the rear wall of the
product when installing it under a
counter or in a cupboard.
Mounting over a washing
machine
•
A fixing device should be used
between the two machines when
installing the dryer above a washing
machine. The fixing device can
usually be obtained from a specialist
retailer.
Total weight of the washing machine
and the dryer -with full load- when
they are placed on top of each other
reaches to approx. 180 kilograms.
Place the products on a solid floor
that has sufficient load carrying
capacity!
Connecting the water drain hose
1. Pull hose in the product by hand in
order to disconnect it from where it is
connected. Do not use any tools to
remove the hose.
2. Connect one end of the drain hose
supplied separately with the product
to the connection point from where
you removed the hose of the product
in previous step.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
10 EN
3. Connect the other end of the drain
hose directly to the wastewater drain
or to the washbasin.
in accordance with recycled waste
instructions. Do not dispose of them with
normal domestic waste.
AHose must be fixed in every type
Transportation of the product
1. Unplug the product before
transporting it.
2. Remove the water drain (if any).
3. Drain the water in the product
completely.
of connection. Your house will be
flooded if the hose comes loose
during water discharge.
CWater drain hose should be attached
to a height of maximum 80 cm.
CMake sure that the water drain hose
AWe recommend carrying the product
is not stepped on and it is not folded
in upright position. If it is not possible
between the drain and the machine.
to carry the machine in the upright
position, we recommend carrying
it by tilting towards the right side
when looked from the front. After the
product is moved to its new place,
you should wait for 12 hours before
starting it.
Adjusting the feet
In order to ensure that the product
operates more silently and vibration-free,
it must stand level and balanced on its
feet. Balance the machine by adjusting
the feet.
Turn the feet to left or right until the
machine stands level and firmly.
CNever remove the adjustable feet
from their housings.
First use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in
sections “Important safety instructions”
and “Installation”.
Disposing of packaging
material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place away from reach of the
children.
Packaging materials of the product are
manufactured from recyclable materials.
Dispose of them properly and sort
Download from Www.Somanuals.com. All Manuals Search And Download.
11 EN
Disposing of the old product
Dispose of the old product in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how
to dispose of your product.
CWater collected during operation is
pumped to water tank. It is normal
to hear pumping noise during this
process.
For children’s safety, cut the power
cable and break the locking mechanism
of the loading door so that it will be
nonfunctional before disposing of the
product.
Warnings about sounds
CIt is normal to hear metallic noise from
the compressor sometimes during
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
12 EN
4 Electrical Connection
Colour of the replacement fuse cover
must be the same colour as that visible
on the pin face of the plug. Fuse covers
are available from any good electrical
store.
In order to avoid hazards, damaged
supply cord should be replaced by the
manufacturer, its service agent or similarly
qualified people.
Make sure that you have an earthed
power outlet socket rated at 13 amps
(minimum).
Attention!
If you use your dryer as built-in,
the socket must be reachable after
installation, or a separate switch (which
can disconnect the two poles) must
be used in the installation. Check for
suitability.
Important
Fitting a different plug
A
For a permanent connection, a master
switch with at least 3mm contact
clearance and minumum 13 A rating
must be used.
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying
the terminals on your plug, proceed as
follows:
1 Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol or
coloured green and yellow or green.
2 Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’ or
coloured black.
Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
3 Connect the brown (live) wire to
the terminal in the plug marked ‘L’ or
coloured red.
Should the mains lead of the appliance
become damaged or need replacing at
any time, it must be replaced by a special
purpose made mains lead which can only
be obtained from a Authorised Service
Agent.
With the alternative plugs a 13A fuse
must be fitted either in the plug or
adaptor or in the main fuse box. If in
doubt contact a qualified electrician.
Warning
A
Green and yellow
or green
This appliance must be earthed
If the fitted moulded plug is not suitable
for your socket, then the plug should be
cut off and an appropriate plug fitted.
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse
need to be replaced an ASTA approved
BS1362 fuse of the same rating must
be used. Do not forget to refit the fuse
cover. In the event of losing the fuse
cover, the plug must not be used until a
replacement fuse cover has been fitted.
N
L
Blue or black
Brown or red
Download from Www.Somanuals.com. All Manuals Search And Download.
13 EN
Washer/dryer combination
Do not stack washing machine on top
of the tumble dryer. This would damage
both appliances and guarantees would
become void. It is also unsafe to stack
an appliance on top of another without
using a suitable and approved stacking
kit obtained from specialist retailers.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 EN
5 Preparations for drying
Things to be done for energy
machine is not in use.
Laundry suitable for drying in
the machine
saving
Following information will help you use
the product in an ecological and energy- CAlways obey the instructions given
on the garment tags. Dry only the
laundry having a label stating that
they are suitable for drying in a dryer
and make sure that you select the
appropriate programme.
efficient manner.
•
Operate the product at a capacity
suitable for the programme you have
selected and pay attention not to
overload.
•
Spin your laundry at the highest
speed possible when washing them.
Thus, the drying time is shortened
and energy consumption is reduced.
Dry the same type of laundry
together.
Follow the instructions in the user
manual for programme selection.
Leave sufficient clearance at the
front and rear side of the dryer for
air circulation. Do not block the
ventilation grills at the front side of the
product.
A B C D
l n m
•
•
•
o p q
•
Do not open the loading door of
the machine during drying unless
necessary. If you must certainly open
the loading door, do not to keep it
open for a long time.
Laundry unsuitable for drying
in the machine
•
Laundry and items stated below are
not suitable for drying in a dryer:
Laundry items with metal
attachments such as metal buttons,
metal reinforcements or belt buckles.
Woollen or silk garments, nylon
stockings, delicate embroidered
fabrics and sleeping bags.
Garments made of delicate and
valuable fabrics.
•
•
Do not add new (wet) laundry during
drying.
•
Lint and fibres released from the
laundry to the air during the drying
cycle are collected in the Lint Filter.
Clean the lint filter before or after each
drying cycle.
Clean the filter drawer regularly either
when the Filter Drawer Cleaning
warning symbol appears or after
every 5 drying cycles
Ventilate the room, where the dryer is
located, well during drying.
For models with lamp, keep the door
closed if the On/Off button is pressed
(if the machine is energized) when
•
•
•
•
•
Fine net or voile curtains.
Items made of hermetic fibres such
as pillows and quilts.
•
•
•
•
•
Very wet laundry items.
Unwashed dirty laundry items.
Laundry items containing rubber
foam or rubber.
Download from Www.Somanuals.com. All Manuals Search And Download.
15 EN
load more than the capacity values stated
in the table.
Items cleaned, washed or spotted
with gasoil/fuel oil, dry-laundry
solvents, industrial chemicals or other
combustible or explosive materials
should not be dried in the dryer.
Items soiled with cooking oils,
acetone, alcohol, fuel oil, kerosene,
stain removers, turpentine, paraffin
and paraffin removers must be
washed in hot water with plenty of
detergent before being dried in the
dryer.
CIt is not recommended to load the
dryer with laundry exceeding the
level indicated in the figure. Drying
performance will degrade when the
machine is overloaded. Furthermore,
dryer and the laundry can get
damaged.
Following weights are given as examples.
Approximate
weights (g)
Home articles
Preparing laundry for drying
Cotton quit covers
(double)
Cotton quit covers
(single)
Bed sheets (double)
Bed sheets (single)
Large tablecloths
Small tablecloths
Tea napkins
1500
•
Check all garments before loading
and make sure that there is no any
lighters, coins, metal pieces, needles,
and etc. in their pockets or on them.
Laundry may be tangled after
washing. Separate the laundry items
before placing them into the dryer.
Sort the laundry according to their
types and thicknesses. Dry the same
type of laundry together. For instance,
thin kitchen towel and table cloths get
dry earlier than the thick bath towels.
1000
500
350
700
250
100
•
•
Bath towels
Hand towels
700
350
Approximate
weights (g)
150
Garments
CLaundry must be spun at the highest
Blouses
spin speed that the washing machine
allows on basis of the fabric type.
Correct load capacity
Cotton shirts
Shirts
Cotton dresses
Dresses
300
200
500
350
Jeans
700
Handkerchiefs (10
pieces)
T-Shirts
100
125
Follow the instructions in the “Programme
selection and consumption table”. Do not
Download from Www.Somanuals.com. All Manuals Search And Download.
16 EN
Loading the laundry
1. Open the loading door.
2. Place the laundry in the machine
without compressing.
3. Push the loading door to close.
AEnsure that no items are caught in
the door.
Download from Www.Somanuals.com. All Manuals Search And Download.
17 EN
6 Selecting a Programme and Operating Your Machine
Control panel
1
2
3
4
5
9
8
7
6
1. Washing Machine Spin Speed / Timer
Programme Selection button
2. Display
3. Start / Pause / Cancel button
4. Programme Selection knob
5. On / Off button
6. Anti-creasing button
7. Dryness Level button
8. Cancel Audio Warning button
9. Time Delay buttons
Spin speed / Timer programmes*
Operation symbol
Pause symbol
Water Tank warning symbol
Filter cleaning warning symbol
Filter Drawer Cleaning warning symbol
Remaining Time indicator**
Child-proof Lock warning symbol
Time Delay mode
Loading door open warning symbol
Anti-creasing mode
Audio Warning Level / Cancel Audio Warning
Dryness Level
Anti-creasing is activated
*
Spin speed is used to show the remaining time more accurately. It does not
affect the performance of your machine.
** Time that appears on display indicates the remaining time until the end of the
programme and changes according to the dampness level of the laundry.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 EN
bathrobes, etc.).
• Synthetics
Preparing the machine
1. Plug in the machine.
Dry less durable laundry with this
programme. Recommended for
synthetics.
Additional programmes
For special cases, following additional
programmes are available in the machine.
2. Place the laundry in the machine.
3. Press the On / Off button.
CPressing the On / Off button does
not necessarily mean that the
programme has started. Press Start
/ Pause / Cancel button to start the
programme.
CAdditional programmes may differ
according to the features of your
Programme selection
1. Decide the appropriate programme
from the table below which includes
drying levels.
2. Select the desired programme with
the Programme Selection knob.
Only the cotton laundry
machine.
• Xpress 1kg
You can use this programme to dry your
cotton laundry that you have spun at high
speeds in your washing machine. This
programme dries 1 kg cotton laundry (3
Shirts/3 T-shirts) in 45 minutes.
is dried at normal
temperature. Thick and
multi layered laundry
CTo obtain better results from your
dryer, your laundry must be washed
Extra Dry
(towels, linens, jeans and
etc.) are dried in a way that
they do not require ironing
before being placed in the
wardrobe.
at suitable programmes and spun
at the recommended speed in the
washing machine.
• Shirts
This programme dries the shirts more
sensitively and creases them less and
thus, helps to iron them more easily.
Normal laundry
(tablecloths, underwear
and etc.) are dried in a way
that they do not require
ironing before being placed
in the wardrobe.
Cupboard
dry
CThere may be a little moisture on the
shirts at the end of the programme.
We recommend you not to leave the
shirts in the dryer.
Normal laundry (shirts,
dresses and etc.) are dried
ready to be ironed.
• Jeans
Iron Dry
Use this programme to dry your jeans
that are spun at high speeds in the
washing machine.
CFor further programme details,
• Mix
see "Programme selection and
Use this programme to dry colour-fast
synthetic and cotton laundry items
together.
consumption table".
Main programmes
Depending on the fabric type, the
following main programmes are available:
• Cottons
• Sportswear
Use this programme to dry together the
synthetic and cotton laundry items and
the laundry items made of mixed fabrics.
• Woollens care
Dry durable laundry with this programme.
Dries at normal temperature. It is
recommended to use for your cotton
items (bed sheets, quilt covers, towels,
You can use this programme to ventilate
Download from Www.Somanuals.com. All Manuals Search And Download.
19 EN
and soften your woollen laundry that
can be washed in the washing machine.
Do not use this programme to dry your
laundry completely. Take out your laundry
and ventilate them immediately after the
programme is over.
• Daily Quick
This programme is used to dry cottons
and synthetics daily, and lasts for 1.5
hour.
• Baby Clothing
This programme is used for baby clothes
that bear machine dryable approval on its
label.
• Delicates
You can dry your highly delicate laundry
that are suitable for drying or laundry
which is advised to be hand-washed at a
lower temperature.
CIt is recommended to use a cloth bag
to prevent certain delicate laundry
from getting creased or damaged.
Take your laundry immediately out
of the dryer and hang them after the
programme is over in order to prevent
them from getting creased.
• Freshen up
Only ventilation is performed for 10
minutes without blowing hot air. You can
air the clothes that have been kept at
closed environments for a long time and
deodourise unpleasant odours thanks to
this programme.
• Timer programmes
You can select one of the 10 min., 20
min., 30 min., 40 min., 50 min., 60 min.,
80 min., 100 min., 120 min., 140 min.
and 160 min. timer programmes to
achieve the desired final drying level at
low temperatures.
CWith this programme, the machine
dries for the time selected regardless
of the dryness level.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 EN
Programme selection and consumption table
EN
2
Approximate
amount of
remaining
humidity
Spin speed in washing
machine (rpm)
Drying time
(minutes)
Programmes
Capacity (kg)
Cottons / Coloureds
Extra dry
8
8
8
1000
1000
1000
60 %
60 %
60 %
190
175
150
A
Cupboard dry
A
Iron dry
A
Baby Clothing
3
1.5
4
1000
1200
1200
1200
1000
1000
1200
600
60 %
50 %
50 %
50 %
60 %
60 %
50 %
40 %
50 %
80
50
Shirts
Jeans
120
90
Daily Quick
Mix
4
4
115
105
45
Sportswear
Xpress 1kg
Delicates
Woollens care
Synthetics
4
1
2
55
1.5
600
8
Cupboard dry
4
4
800
800
40 %
40 %
70
55
B
Iron dry
B
Energy consumption values
Approximate
amount of
remaining
humidity
Energy
Spin speed in washing
machine (rpm)
Programmes
Capacity (kg)
consumption
value kWh
Cottons linen Ready to
wear*
8
1000
60 %
2,68
Cottons Ready to iron
8
4
1000
800
60 %
40 %
2.1
Synthetics Ready to wear
0,95
* : Energy Label standard programme (EN 61121:2005)
All values given in the table have been fixed according to EN 61121:2005 Standard.
These values may deviate from the values in the table according to the laundry type,
laundry spin speed, environmental conditions and voltage fluctuations.
Download from Www.Somanuals.com. All Manuals Search And Download.
21 EN
Auxiliary functions
Audio Warning
The machine will give an audio warning
when the programme comes to an end.
If you do not want the machine to give an
audio warning, press the Volume Level
button repeatedly until "x" appears on the
display. Use the same button to adjust
the volume level.
CPress Anti-creasing button to activate
this function.
Changing the contrast
CYou can activate this function either
Adjust the display contrast in order to
make the symbols on the display appear
clearer. It may particularly be necessary to
change the contrast setting of the display
when the dryer is installed over a washing
machine.
before or after the programme starts.
Cancel
audio warning
Audio warning Audio warning
level 1 level 2
Audio warning
level 3
Dryness level
Press and hold the Spin Speed / Timer
Programme button for 3 seconds.
When the contrast is changed, all
symbols on the display will appear for
3 seconds in order to indicate that the
process is complete.
Used to adjust the required dryness level.
More drying is performed compared
to the default settings when "+" sign
appears and less drying is performed
when "-" sign appears. Programme
duration can change depending on the
selection.
CPerform the same procedure to revert
back to the previous contrast setting.
CYou can activate this function only
Warning symbols
before the programme has started.
CWarning symbols may differ
according to the model of your
machine.
Lint filter cleaning
Anti-creasing
When the programme is completed, a
warning symbol will appear to remind that
the filter needs to be cleaned.
You can use Anti-creasing function to
prevent laundry from creasing if you
will not take the laundry out after the
programme has come to an end. This
programme rotates the laundry in every
240 second for 2 hours to prevent
creasing.
CIf the Filter Cleaning symbol flashes
continuously, refer to “Troubleshooting”
section.
Anti-creasing is activated but the
programme is still running in the first
display image below. Drying cycle is
completed and the Anti-creasing step has Water tank
started in the second display image. When the programme is completed, a
warning symbol will appear to remind that
the water tank needs to be drained.
If the water tank becomes full while
the programme is running, the warning
Download from Www.Somanuals.com. All Manuals Search And Download.
22 EN
symbol will start to flash and machine will
pause. Drain the water in the water tank
and press Start / Pause / Cancel button
to resume the programme. The warning
symbol turns off and the programme
resumes operating.
period. At the end of the Time Delay
countdown process, Time Delay
symbol disappears, drying process
starts and the programme duration
is displayed. The time on the display
is the total of normal drying time and
delay time.
Cleaning of filter drawer
Warning symbol flashes with certain
intervals to remind that the filter drawer
needs to be cleaned.
Time Delay is activated by pressing the
Start / Pause / Cancel button in the
above display image.
Changing the delay time
If you want to change the time during
countdown:
Loading door open
This warning symbol appears when the
loading door of the dryer is open.
1. Press Start / Pause / Cancel
button for 3 seconds to cancel the
programme. Repeat the Time Delay
procedure for the desired time.
2. Set the desired delay time with Time
Delay + and - buttons. The Time
Delay symbol will flash.
3. Press Start / Pause / Cancel button.
The Time Delay starts to count down.
The Time Delay symbol lights up.
Pause symbol disappears. Start
symbol appears.
4. The “:” in the middle of the displayed
delay time will start flashing.
Cancelling the Time Delay
If you want to cancel the Time Delay
countdown and start the programme
immediately:
1. Press Start / Pause / Cancel
button for 3 seconds to cancel the
programme.
Time Delay
Time Delay function allows you to delay
the startup of the programme up to 24
hours.
1. Open the loading door and put the
laundry in.
2. Select the drying programme, spin
speed and, if required, the auxiliary
functions.
3. Press Time Delay buttons + and - to
set the desired time delay. The Time
Delay symbol will flash.
4. Press Start / Pause / Cancel button.
The Time Delay starts to count down.
The Time Delay symbol lights up.
Start symbol appears. The “:” in the
middle of the displayed delay time will
start flashing.
2. Press Start / Pause / Cancel button
to start the programme you have
previously selected.
CAdditional laundry may be loaded
/ taken out during the Time Delay
Download from Www.Somanuals.com. All Manuals Search And Download.
23 EN
Starting the programme
Press Start / Pause / Cancel button to
start the programme.
Start / Pause symbol will light up to
indicate that the programme has started
and ":" symbol between the remaining
time will continue flashing.
Child-proof Lock
Machine is equipped with a Childproof
Lock which prevents interfering with the
current programme flow by pressing
any button. All buttons except the On
/ Off button on the control panel are
deactivated when the Child-proof Lock is
active.
In order to activate the Childproof Lock,
press Audio Warning and Anti-Creasing
buttons simultaneously for 3 seconds.
To start a new programme after the
current programme is over or to interrupt
the current programme, the Child-proof
Lock should be deactivated. Press the
same buttons for 3 seconds again to
deactivate the Child-proof Lock.
Progress of programme
Anti-
creasing
Drying
Wardrobe
(Extra)
Iron
Ventilation
Progress of a running programme is
indicated on the display by means of a
set of symbols.
At the beginning of each programme
step, the relevant symbol in the series of
symbols will light up and thus, at the end
of the programme, all symbols will remain
lit up. The rightmost symbol on the
display indicates the step being carried
out.
CLock symbol will appear on the
display when the Child-proof Lock is
activated.
CChild-proof Lock is deactivated when
the machine is switched off and on
Drying
with On / Off button.
Drying symbol lights up in all programmes
apart from ventilation.
Iron Dry
Starts to illuminate when the dryness level
reach Iron Dry step.
Wardrobe Dry
Starts to illuminate when the dryness level
reach Wardrobe Dry step.
Wardrobe Dry Extra
Starts to illuminate when the dryness level
reach Wardrobe Dry Extra step.
Ventilation
When the Child-proof Lock is activated:
•
Display symbols will not change
even if the position of Programme
Selection knob is changed while the
machine is running or in halt.
•
If the Child-proof Lock is deactivated
after changing the position of
the Programme Selection knob
while the machine is running, the
machine stops and new programme
information is displayed.
Changing the programme after
it has started
After the machine starts, you can change
the selected programme and dry your
laundry in a different programme.
1. If you want to select Extra Dry
Ventilation symbol illuminates when the
programme comes to an end.
CAnti-creasing symbol will illuminate
at the end of the programme if Anti-
creasing function is activated.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 EN
programme instead of Iron Dry
programme, press and hold the
Start / Pause / Cancel button for 3
seconds to cancel the programme.
2. Select Extra Dry programme by
turning the Programme Selection
knob.
the programme time and energy
consumption since the drying
process will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme
has started.
CIf you select a new programme by
3. Press Start / Pause / Cancel button
to start the programme.
turning the Programme Selection
knob while your machine is in Pause
mode, then the current programme
is aborted and new programme
information is displayed.
Do not touch the inner surface of
the drum when adding or taking
out laundry while a programme is
running. Surfaces of the drum are
hot.
CYou can also select a new
programme by turning the
Programme Selection knob while the
machine is operating. In this case,
current programme is aborted and
the new programme information
appears on the display.
Cancelling the programme
If you want to stop drying and cancel
the programme for any reason after the
machine has started to run, press and
hold the Start / Pause / Cancel button
for 3 seconds. Lint Filter Cleaning and
Water Tank warning symbols light up and
"End" label appears on the display as a
reminder at the end of this period.
Adding / removing laundry in Pause
mode
In order to add or take out laundry after
the drying programme has started:
1. Press Start / Pause / Cancel button
to switch the machine to Pause
mode. Drying process will stop.
2. While in Pause mode, open the
loading door, add or take out laundry
and close the loading door.
3. Press Start / Pause / Cancel button
to start the programme.
AAs the inside of the machine will be
excessively hot when you cancel
CAny laundry added after the drying
the programme while the machine
is running, activate the ventilation
programme to cool it down.
process has started may cause the
clothes that are already dried in the
machine intermingle with wet clothes
and the result will be wet laundry after
the drying process is over.
CMachine will stop if you turn the
Programme Selection knob while
it is operating. In this case, current
programme is aborted and the new
programme information appears on
the display.
CYou may repeat laundry adding
or removing process as many
times as you desire during drying.
However, this process will increase
Download from Www.Somanuals.com. All Manuals Search And Download.
25 EN
End of programme
Lint Filter Cleaning and Water Tank
warning symbols light up in the
programme follow-up indicator and
"End” label appears on the display when
the programme comes to an end. The
loading door can be opened and the
machine becomes ready for a second
cycle.
Press On / Off button to switch off the
machine.
CIf Anti-creasing function is activated
and the laundry is not taken from
the machine at the end of the
programme, 2-hours Anti-creasing
programme is activated.
CClean the lint filter after each drying.
(See “Lint Filter / Loading Door Inner
Surface”)
CDrain the water tank after each drying
cycle. (See "Draining the water tank")
Download from Www.Somanuals.com. All Manuals Search And Download.
26 EN
7 Maintenance and cleaning
Service life of the product extends and
frequently faced problems decrease if
cleaned at regular intervals.
up on the lint filter surface. Dry the lint
filter completely before reinstalling it.
BThis product must be unplugged
during maintenance and cleaning
works (control panel, body, etc.).
Lint Filter / Loading Door Inner
Surface
Lint and fibres released from the laundry
to the air during the drying cycle are
collected in the Lint Filter.
CClean the entire inner surface of the
loading door and loading door gasket
with a damp cloth.
C*Such fibre and lint are generally
formed during wearing and washing.
AAlways clean the lint filter and the
inner surfaces of the loading door
after each drying process.
CYou can carefully clean the lint filter
housing with a vacuum cleaner.
To clean the lint filter:
Cleaning the sensors
1. Open the loading door.
2. Remove the lint filter by pulling it up
and open the lint filter.
3. Clean lint, fibre, and cotton by hand
or with a soft piece of cloth.
4. Close the lint filter and place it back
into its housing.
CA layer can build up on the lint filter
pores that can cause clogging of the
lint filter after using the machine for a
while. Wash the lint filter with warm
water to remove the layer that builds
Download from Www.Somanuals.com. All Manuals Search And Download.
27 EN
There are dampness sensors in the
machine that detect whether the laundry
is dry or not.
2. Drain the water in the tank.
To clean the sensors:
1. Open the loading door of the
machine.
2. Allow the machine to cool down if it is
still hot due to the drying process.
3. Wipe the metal surfaces of the sensor
with a soft cloth, dampened with
vinegar and dry them.
3. If there is lint accumulation in the
funnel of the water tank, clean it
under running water.
CClean metal surfaces of the sensors 4
times a year.
CDo not use metal tools when cleaning
4. Place the water tank into its seat.
Cleaning the filter drawer
Lint and fibre that could not be captured
by the lint filter are blocked in the filter
drawer behind the kick plate. Filter
Drawer Cleaning warning light will light up
maximum at every 5 drying cycles as a
metal surfaces of the sensors.
ANever use solvents, cleaning agents
or similar substances for cleaning due
to the risk of fire and explosion!
Draining the water tank
Dampness of the laundry is removed and
condensed during drying process and the reminder.
water formed accumulates in the water
tank. Drain the water tank after each
drying cycle.
There is a two-level filter in the filter
drawer. The first level is the filter drawer
sponge and the second level is the filter
cloth.
To clean the filter drawer:
1. Press the kick plate button to open
the kick plate.
ACondensed water is not drinkable!
ANever remove the water tank when
the programme is running!
If you forget to drain the water tank, the
machine will stop during the subsequent
drying cycles when the water tank is full
and the Water Tank warning symbol will
flash. If this is the case, drain the water
tank and press Start / Pause / Cancel
button to resume the drying cycle.
To drain the water tank:
1. Pull the drawer and remove the water
tank carefully.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 EN
2. Remove the filter drawer cover by
6. Clean lint, fibre, and cotton from
the filter cloth by hand or with a soft
piece of cloth.
turning it in the direction of arrow.
3. Pull out the filter drawer.
CWhen you notice a layer that may
lead to clogging on filter cloth,
please clean the layer by washing in
warm water. Let the filter cloth dry
thoroughly before installing back the
filter drawer.
7. Hand-wash the filter drawer’s sponge
to remove hair and lint on it. Squeeze
the sponge by hand to remove
excessive water.
4. Open the filter drawer by pressing the
red button.
CIt is not necessary to clean the
sponge if lint and fibre accumulation
on it is not significant.
8. Place the sponge back into its place.
5. Take out the filter drawer sponge.
9. Close the filter drawer as to lock the
red button.
Download from Www.Somanuals.com. All Manuals Search And Download.
29 EN
10. Place the filter drawer back into its
place, turn the filter drawer cower
clockwise making sure that it is
closed securely.
Cleaning the evaporator
Carefully clean the lints accumulated on
the fins of the evaporator located behind
the filter drawer with a vacuum cleaner.
11. Close the kick plate cover.
CYou can also clean by hand provided
that you wear protective gloves. Do
not attempt to clean with bare hands.
CDrying without the filter drawer
sponge in place will damage the
machine!
CA dirty lint filter and filter drawer will
cause longer drying periods and
higher energy consumption.
CA layer can build up on the lint filter
pores that can cause clogging of the
lint filter after using your machine for
a while. Wash the lint filter with warm
water to remove the layer that builds
up on the lint filter surface. Dry the lint
filter completely before using it.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 EN
8 Troubleshooting
Drying process takes too much time.
•
•
•
Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.
Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
Ventilation grids on the front side of the machine are blocked. >>> Remove the
objects (if any) that block ventilation in front of the ventilation grids.
Ventilation is not sufficient since the room where the machine is installed is
very small. >>> Open the door and window of the room to avoid the room
temperature increase too much.
•
•
Lime deposit has built up on the dampness sensor. >>> Clean the dampness
sensor.
•
•
Excessive laundry is loaded. >>> Do not load the dryer in excess.
Laundry is not spun sufficiently. >>> Spin your laundry at a higher speed in your
washing machine.
Laundry comes out wet at the end of drying.
CAfter drying, the hot clothes feel damper than their actual dampness level.
•
It is likely that the selected programme did not suit the laundry type.>>>Checking
the care labels on clothes, select appropriate programme for the laundry type or
use timer programmes in addition.
•
•
Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.
Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter
drawer.
•
•
Excessive laundry is loaded. >>> Do not load the dryer in excess.
Laundry is not spun sufficiently. >>> Spin your laundry at a higher speed in your
washing machine.
Dryer does not switch on or the programme does not start. Dryer does not start
when it is set.
•
•
•
It is not plugged in. >>> Make sure that the machine is plugged in.
The loading door is ajar. >>> Make sure that the loading door is closed securely.
Programme is not selected or the Start / Pause / Cancel button is not pressed.
>>> Make sure that the programme is selected and the machine is not in Pause
mode.
•
Childproof Lock is activated. >>> Deactivate the Childproof Lock.
Programme is interrupted without any cause.
•
•
Loading door is ajar. >>> Make sure that the loading door is closed securely.
There was a power failure. >>> Press Start / Pause / Cancel button to start the
programme.
•
Water tank is full. >>> Drain the water tank.
Laundry has shrunk, become felted or deteriorated.
•
A programme suitable for the laundry type is not used. >>> Check the garment
tag and select a programme suitable for the fabric type.
Download from Www.Somanuals.com. All Manuals Search And Download.
31 EN
Drum lighting does not turn on. (On models with lamp)
•
Dryer is not switched on with the On / Off button. >>> Make sure that the dryer is
switched on.
•
Lamp is defective. >>> Call Authorized Service Agent to have the lamp replaced.
End/Anti-creasing symbol is on.
•
Anti-creasing programme is activated in order to prevent laundry that has
remained in the machine from creasing. >>> Turn off the dryer and take out the
laundry.
End symbol is on.
Programme is over. Turn off the dryer and take out the laundry.
Lint Filter Cleaning symbol is on.
Lint filter is not cleaned. >>> Clean the lint filter.
Lint Filter Cleaning symbol is flashing.
•
•
•
•
Filter housing is clogged with lints. >>> Clean the lint filter housing.
A deposit has built up on the lint filter pores that may cause clogging. >>> Wash
the lint filter with warm water.
•
Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter
drawer.
Water leaks from the loading door
•
Lint has accumulated on the inner surfaces of the loading door and on the
surfaces of the loading door gasket. >>> Clean the inner surfaces of the loading
door and the surfaces of the loading door gasket.
Loading door opens spontaneously.
•
Loading door is ajar. >>> Push the loading door to close until you hear a locking
sound.
Water Tank warning symbol is on/flashing.
•
•
Water tank is full. >>> Drain the water tank.
Water draining hose is bent. >>> If the product is connected directly to a
wastewater drain, check the water drain hose.
Filter Drawer Cleaning warning symbol is flashing.
•
Filter drawer is not cleaned. >>> Clean the sponge and the filter cloth in the filter
drawer.
AIf you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or the Authorized Service Agent. Never try to repair a
nonfunctional product yourself.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 EN
9 Guarantee
Your new product is guaranteed against
the cost of breakdown repairs for twelve
months from the date of the original
purchase.
Important notes
•
Your product is designed and built for
domestic household use only.
The guarantee will be void if the
product is installed or used in
commercial or non-residential
domestic household premises.
The product must be correctly
installed, located and operated in
accordance with the instructions
contained in the User Instructions
Booklet provided.
Professional installation by a qualified
Electrical Domestic Appliance
Installer is recommended for all
Washing Machines,Tumble Dryers,
Dishwashers, Dryers and Electric
Cookers
•
What is covered?
•
•
•
Repairs necessary as a result of faulty
materials, defective components or
manufacturing defect.
The cost of functional replacement
parts, but excluding consumable
items.
•
•
The labour costs of a approved
repairer to carry out the repair.
What is not covered?
• Transit, delivery or accidental damage
or misuse and abuse.
• Cabinet or appearance parts, including
knobs, flaps, handles or container
lids.
• Accessories or consumable items
including but not limited to, ice trays,
scrapers, cutlery baskets, filters and
light bulbs.
• Repairs required as a result of
unauthorised repair or inexpert
installation that fails to meet the
requirements contained in the user
instruction book.
•
•
Gas Cookers must only be installed
by a Gas safe registered Gas Installer.
The guarantee is given only within the
boundaries of the United Kingdom
and the Republic of Ireland.
•
The guarantee is applicable only to
new products and is not transferable
if the product is resold.
•
•
Disclaims any liability for incidental or
consequential damages.
The guarantee does not in anyway
diminish your statutory or legal rights.
• Repairs to products used on
commercial or non-residential
household premises.
• Loss of frozen food in freezers or fridge/
freezers. (Food loss insurance is
often included within your household
contents insurance policy, or may
be available separately from your
retailer).
Download from Www.Somanuals.com. All Manuals Search And Download.
33 EN
10 Service
Please keep your purchase receipt
or other proof of purchase in a safe
place; you will need to have it should
the product require attention under
guarantee.
UK Mainland & Northern Ireland
Fridges & Freezers 0845 600 4903
Electric Cookers 0845 600 4902
Gas & Dual Fuel Cookers
0845 600 4905
You should also complete the details
below; it will help us assist you when
requesting service. (The model number
is printed on the Instruction Booklet and
the serial number is printed on the Rating
Label affixed to the appliance)
Washing Machines & Tumble Dryers
0845 600 4906
Model No:
Serial No:
Retailer:
Date of purchase:
Republic of Ireland
All Refrigeration, 01 862 3411
All Cookers
Washing Machines & Dryers, Tumble
Dryers Dishwashers
Before requesting service please
check the trouble-shooting guide in the
Operating Instructions as a charge may
be levied where no fault is found even
though your product may still be under
guarantee.
Service once the manufacturers
guarantee has expired.
If you have purchased an extended
guarantee please refer to the instructions
contained within the extended guarantee
agreement document. Otherwise please
call the appropriate number above where
service can be obtained at a charge.
Should you experience any difficulty in
obtaining service please contact the
Customer Help-Line.
Tel: 0845 600 4911
For service under guarantee simply
telephone the appropriate number below.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|