INTEGRATED DIGITAL HD READY COLOUR TELEVISIONS
32WLU530HID
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Important Information
LCD panels are produced with state-of-the-art technology. However, there may be missing or
lit spots on the screen under certain circumstances. That does not mean that the product is
faulty.
1.1-Cleaning the screen and cabinet...
After powering off, wipe the screen and the cabinet clean with a soft and dry cloth. We
recommend that you do not use patented polishes or solvents on the screen or cabinet since
they may cause damage.
1.2-Disposing of your TV at the end of service life...
The cold cathode fluorescent lamp found in your LCD screen contains a very small amount of
mercury. Once your TV reaches the end of its useful life, please dispose of it in accordance
with local government regulations or leave it at a recycling centre.
1.3-Superior features of your integrated digital television
This television can receive and process all analogue and digital broadcasts. This television set
has an integrated digital and analogue receiver. The digital receiver unit processes the signals
coming from digital transmitters and converts them into superior sound and image quality. TV
Guide (valid for digital broadcasts only) informs you about changes in the program list briefly
and provides program lists of all digital broadcasts for a number of forthcoming days. You can
display detailed information about each program by pressing a single button if this feature is
supported by the broadcaster. This television has a comprehensive and user friendly menu
configuration.
1.4-Receiving digital broadcasting channels
You will need an outdoor aerial to receive digital broadcasts. Contrary to the analogue
broadcasts, all digital broadcasts may not have their own transmission frequency. Instead,
various digital broadcasts channels are gathered in regional or national groups called bouquets.
You can find current transmission data from teletexts of various broadcasters or from TV guide
or from the internet.
NOTE:
• HD signals must be connected to the HDMI input or component (YPbPr) inputs. See
page 8 for external connections.
• You should check your postcode to make sure that you are in freeview coverage area
(www.freewiew.co.uk).
Download from Www.Somanuals.co1m. All Manuals Search And Download.
1.5-Changing the plug
The supplied mains cable already has a mains plug fitted, however should you need to
replace it at any time please refer to the appropriate wiring information below for your
particular cable.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Features of your new television
We would like this product, which has been manufactured in modern facilities in accordance
with total quality principles, to offer you the best performance. Therefore, we would like you to
read this entire manual carefully before you use your product and keep it for future reference.
2.1-Special Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
HD-Ready feature.
HDCP feature.
2-HDMI connection input.
High image and sound performance.
CI slot input.
8-day EPG (Electronic Program Guide)
Favourite channel list in digital mode (maximum 4 lists)
Performing Digital and Analogue processes by a single menu.
Updating feature for all system software through on-air broadcasting.
Dynamic bass
Wide angle of vision.
Scart / S-Video / Phono connection inputs.
PC connection.
Low energy consumption.
AVL (Automatic Volume Limiting) feature.
Programmable power on/off feature.
1000-page Teletext.
Graphic equalizer.
Clearer pictures with the Digital Comb Filter.
Sharpness feature in Colour Transitions (CTI)
Sharpness feature and picture resolution (LTI) in black-white transitions
Fine Tuning.
Memory capacity up to 100 analogue channels.
Memory capacity up to 400 digital channels.
Infrared remote control equipped with all functions.
Child Lock
Panel Lock
Pausing and Zooming the picture
Ability to watch NTSC broadcasts via Scart input.
4:3, 16:9, 14:9 Letterbox, Subtitle and Panorama picture formats.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Download from Www.Somanuals.co3m. All Manuals Search And Download.
3 Important Safety Instructions
This symbol is used to warn the user about the “dangerous voltage” contained
inside the housing of the product that may create a risk of electrical shock.
This symbol is used to remind the user important usage and service instructions
supplied with the TV.
•
Never install the TV into closed places
such as bookcases or cabinets unless
adequate ventilation is provided.
1) Please READ the operating
instructions before using
your TV for the first time.
2) Please observe the
instructions contained in the
Operating Instructions.
3) Please consider all warnings.
4) MAKE SURE that all
power connections
(extension cables and the
connections between the
TV components) have
been made properly and
8) DO NOT COVER the
ventilation openings of
in accordance with the manufacturer’s
instructions. Before making or changing
the connections, power off the TV and
unplug the mains connection plug.
the TV with items such as
newspapers, tablecloth,
curtain, etc. Overheating
causes damage and shortens the service
life of the TV.
5) If you have any doubts regarding the
installation, operation or safety of the
device, please REFER to the retailer.
9) Your TV may be damaged
if you place it under direct
6) BE CAREFUL with glass panels and
covers on the TV. The screen glass
may break and cause serious injuries if
something hits it.
sunshine or close to a
heater. Please abstain from
using the product in very
hot or humid locations or
7) To ensure adequate ventilation, please
leave a clearance area of at least 10 cm
around the television. This clearance
prevents the TV from overheating and
consequently causing damage.
in places where the temperature is likely
to decrease below 5°C (41°F). DO NOT
PLACE on or near the TV any hot objects
or items with open flame such as candles
or any night lamps. The high temperature
can melt plastic parts and cause a fire.
•
Using the TV in dusty environments
should also be avoided.
Never block the slots and openings by
placing the TV on a bed, sofa, pillow or
other similar surfaces.
•
4
Download from Www.Somanuals.com. All Manuals Search And Download.
10) Never operate your
TV close to water.
Note: Do not use defective sockets.
Make sure that the plug is firmly
inserted into the socket. If the plug
remains loose, then it can cause fire
due to arcing. Refer to an electrician
to have your socket replaced.
Operating your TV,
for example, near a
bathtub, washbasin,
kitchen washbasin,
washing basin, wet basement and
swimming pool can cause fire or electric
shock.
13) Make sure that the power
cable is not stepped on and
that there is no bending
at the plug sections, plug
heads and device output
point.
•
Do not allow your TV
to get wet. Never pour
any liquids onto the
TV. Do not operate
14) Use only the add-ons/accessories
your TV if any solid
specified by the manufacturer.
or liquid substance
enters into it. This can cause electric
shock and your TV may be damaged.
Have it checked immediately by qualified
personnel.
15) Use only or stands specified
by the manufacturer or sold
along with the product.
Place your device on a level
surface.
•
Keep flammable
materials and open
flame sources (such
as candles) away from
TV in order to avoid
risk of fire.
16) Unplug the power cable
during thunderstorms or
when you will not use your
TV for a long period of time.
11) DO NOT USE
headphones at extremely
high volume levels since
this may cause permanent
loss of hearing.
17) Consult authorised service
personnel for service
requirements. Never
12) Operate your TV only in
the 230 V 50Hz voltage
range. Use the AC
attempt to repair
the TV yourself.
Opening the cabinet
power cable supplied
can expose you to
with the product. If your
TV is a grounded (Class
I) product, then it must be connected to a
grounded socket.
The socket into which you plug in the
AC power cable must be within easy
reach.
Unplug the TV in order to disconnect
it from mains power.
dangerous voltages or other hazardous
situations. Service is required in situations
such as damage to the power cable
of the device or its plug, water spills or
substances falling into the TV, the TV is
subjected to rain or moisture, it does not
operate normally or it is dropped.
•
•
Download from Www.Somanuals.co5m. All Manuals Search And Download.
18) Wipe the TV cabinet
21) Do not dispose of your TV
with regular household waste.
Observe local laws and
clean with a soft and dry
cloth. Wipe dust from the
screen gently with a soft
regulations for disposal.
cloth. Stubborn stains
can be cleaned with a
22) For stand fitting and removal please refer
cloth slightly moistened
to loose leaf sheet inside TV carton.
with soap and lukewarm water. Never
use solvents such as thinner or gasoline
for cleaning. Unplug the AC power cable
from the socket when cleaning the TV.
Otherwise, there is the risk of electric
shock.
Note 1: This is a Class A product. During
operation, the device can cause radio
interference. In this case the user may
have to remedy this. Please contact your
specialist dealer.
19) Do not dispose of the
Note 2: Electromagnetic fields can cause
temporary performance degradation.
This can be distinguished as noise in the
image.
batteries in fire.
•
Do not short circuit,
dismantle or overheat
the batteries. There is
the risk of explosion
if the batteries are not replaced
correctly. Replace only with the same
or equivalent type batteries.
20) Disposing of the exhausted
batteries:
Dispose of the exhausted
•
batteries in accordance with
the local laws and regulations in
order to protect our environment.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Start
Remove your television carefully from its box.
You can keep the packaging of your television
to use in future.
Note: If you are not going to use your
television for a long time, unplug its power
cable from the socket.
Contents of the box
Power cable
4.3-Performing initial start and
Remote control
settings
2 batteries
To set up your television, read the sections
on the TV controls and making the channel
settings.
Note: Scart, HDMI, VGA and PHONO
cables are not supplied with the device.
4.1-Aerial connection
4.4-Batteries
Open the lid of the battery compartment
and make sure that you have placed the
batteries in the correct direction. For this
remote control, UM-4, IEC R03 or AAA 1.5 V
batteries are suitable.
Do not throw your old batteries into the fire,
discard them in a dedicated waste area for
this purpose.
Do not mix used batteries with new ones or
different types of batteries together.
The performance of the remote control will be
reduced at a distance of 8 meters from or at
an angle of 30 degrees beyond the centre of
the TV.
4.2-Powering on your device
and the initial use
1. Insert the power cable into the power
supply input located on the back panel of the
LCD TV.
2. Insert the power cable plug supplied with
the tv into the mains socket.
Note: Your TV is equipped to operate with
TV buttons in case your R/C is broken or the
batteries are exhausted.
3. Press the power on/off button
located on the LCD TV.
4. To power on your television,
pPR+ or PR- keys on the
remote control. For this process,
you can also use the buttons on
your TV. The picture will appear on
the screen after a short while.
Download from Www.Somanuals.co7m. All Manuals Search And Download.
5 Your new television
5.1-TV Control Panel
or
or
or
Program Down/Up button
Volume Level Down/Up
button
or
or
or
or
or
Stand by indicator
Menu button/Source selection button
Bright light: TV is in Stand-by
Dimmed light: TV is On
No light: Power Cable is not connected.
or
or
or
Power/Standby button
5.2-Rear and Side External Connections
or
1
2
3
4
5
6
7
8
9
Component video input (Y)
Component audio input (L)
Component video input (Pb)
Component audio input (R)
Component video input (Pr)
SPDIF Digital audio output
VGA (PC connection) input
PC audio input
12 S-Video input
13 Audio input Phono connector
(Left/L)
14 Video input Phono connector
15 Sound input Phono connector
(Right/R)
16 Stereo Headphone socket
17 HDMI 1 input
18 HDMI 2 input
19 CI slot input
Antenna input
10 Scart input
11 Power input
•
•
•
Above drawing for external connections is representational. Their order and places on your
TV may be different.
Please see Technical Specifications Table on page 31 for the available external connections
on your television.
Please do not use the video Phono and S-Video connection simultaneously, otherwise
these two devices might influence the picture quality of one another.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3-Remote Control
Standby
AV
Temporary off button
Source Menu button
Temporary sound mute button
Picture format selection button
Picture and Teletext (PAT) button
Zoom mode selection button
Subtitle selection button (D)
Audio language selection button (D)
Favorites channel list selection button
Teletext page stop button (Stop)
EPG menu button (D)
16:9
Zoom
SUBT
AUDIO
FAV
EPG
Teletext Question/Answer button (Reveal)
Information display button
Teletext mode index page button
Enter menu button
INFO
MENU
1....0
Numeric buttons
BACK
EXIT
Return to previous menu button
Menu exit button
Up/Down movement buttons
Right/Left movement buttons
OK
Confirmation button
Channel List button outside the menu
Volume down/up buttons
Vol-/Vol+
PR+ / PR-
Program forward/backward buttons
Red Teletext button
Green Teletext button
Yellow Teletext button
Blue Teletext button
TXT
TV/Teletext/MIX selection button
Sound mode selection button
Teletext page enlarge button (Double)
Picture mode selection button
Teletext Update button
SWAP
Switching back to the last viewed channel button
Teletext sub page button (Sub)
Picture pause button
FREEZE
SIZE
Time display button
PIP/POS
These buttons have no function
(D): Digital Mode Only.
Note: When there is no menu open on
the screen, up/down movement buttons
have the same function with the PR+/PR-
buttons and left/right movement buttons
have the same function with the Vol+/
Vol- buttons.
Download from Www.Somanuals.co9m. All Manuals Search And Download.
6
Performing the initial power-on settings
6.1.4-Temporary sound mute (MUTE)
6.1-TV controls
6.1.1-Temporary on/off (STAND-BY)
To temporarily mute the sound of your
television, press the MUTE button
When you press the red STANDBY
button located on your remote control
while your television is switched on,
the sound and the picture will go off.
In the stand-by mode, the power
indicator of your television will glow
brighter. To switch your television
back on, either press any numeric button or
P+/P- buttons.
on your remote control. In that case
MUTE symbol will appear on the
screen. When you press the same
button a second time, the sound will
be restored. If you press the VOL+ button
while in the Mute mode, the sound level is
increased and the Mute function is aborted.
6.1.5-Returning to the Last Viewed
Program (SWAP)
Caution! If you are not going to use your
television for a long time, unplug its
power cable from the socket.
Allows you to switch between the
current program you are watching
and the source, or the last selected
program and the source. For example, if you
change the channel to Program 11 while
you were watching Program 1, press SWAP
button to switch back to Program 1. Press
SWAP button to switch back to Program 11
again.
6.1.2-Digital TV, Analogue TV and AV
Mode selection
Press the Source button on your remote
control. SOURCE menu will be displayed.
Select DTV(Digital TV), ATV (Analogue TV) or
desired AV mode from the Source menu with
up/down movement buttons and confirm
with OK button so that your television will
switch to the source you have selected.
6.1.3-Channel Selection
You may select program number you would
like by pressing the P+/P- buttons on your
television and on your remote control. To
select the programs that are above 9, you
can use the Numerical buttons. You may
enter the number of the program you would
like to select using the numerical buttons. For
example, to switch to the program number
12, press respectively the numeric buttons
1 and 2 on your remote control. You can
perform the program selection also from the
Program Table and Channel List menus.
6.1.6-Main Menu
Press the MENU button. The Menu including
all the setting menus will appear on the
screen. Navigate through the Menu titles with
the Right/Left movement buttons and press
the OK button to select the desired menu.
If you want to exit the menu in any step,
just press the EXIT button. Press BACK
or MENU buttons to return to the previous
Menu while you are in a sub menu.
Download from Www.Somanuals.c1om0. All Manuals Search And Download.
6.2-Turning on your television
for the first time and tuning
Installation Guide menu will be displayed on
the screen when you turn on your television
for the first time.
CHANNEL SETUP
Please select country and scan type, then press OK to start tuning
England
DTV
Country Selection
Scan Type
Installation Guide
Time Zone
London GMT
Language Settings
Active antenna power
Auto tuning
English
Back
Select
Exit
Select
Exit
Scroll to the Country Selection
tab by pressing the Up/Down
Press Right/Left movement buttons to
select the desired menu language from the
Language tab. If you are using an active
antenna, (See page 16) set the active antenna
power feature to On. Select Auto Search
by pressing the down movement button and
confirm your selection with OK button or the
right movement button. Country Selection
menu will be displayed. Make the Country
and Scan Type selections by pressing the
Up/Down, Left/Right movement buttons.
Time Zone will be set automatically according
to the country selected. If the antenna
connections are correct, press OK button to
start Auto Search.
movement buttons and press Right/
Left movement buttons to select
your country. Then, scroll to the
Scan Type tab by pressing the
Down movement button and select
DTV option by pressing the Right/
Left movement buttons. Press OK button to
confirm your selections. Digital channels are
searched and stored automatically. At the
same moment, the progress of auto tuning
and the channels stored in the memory are
displayed in the menu.
Press EXIT button to cancel the Auto Tuning.
Searching
6.3-Performing Digital channel
settings
%1 68 MHz
You can tune the Digital programs
automatically or manually and store them in
your television.
1 C-03
2 C-04
6.3.1-Automatic tuning of digital
channels and storing in the
memory
Exit
Press the MENU button on your
remote control. Select CHANNEL
SETUP by pressing the Right/Left
movement button and confirm your
selection with OK button. Select
Auto Tuning tab by pressing the
Up/Down movement buttons and
press Right movement button or OK
button to confirm. Country Selection
menu will be displayed.
Program Table menu is displayed at the end
of the Auto Tuning.
Note: If you wish to search the Digital and
Analogue channels concurrently, choose
Scan Type as Digital and Analogue from
the Auto Tuning menu.
Download from Www.Somanuals.c1o1m. All Manuals Search And Download.
Channel will appear in the list and be stored
in the memory when it is found. Press MENU
button to return to the previous menu from
the manual search menu or press EXIT
button to exit the menu.
ADDITIONAL INFORMATION
Please note that Encrypted channels may
not be stored after scanning in the Digital TV
channels. If this is the case then you will need
to rescan the channels again but this time
change the LIST SCRAMBLED CHANNELS
from AUTO to ON:
6.4-Performing Analogue
channel settings
6.4.1-Automatic tuning of analogue
1
2
3
4
5
Press Menu.
channels and storing in the memory
Select Features.
Select Digital Features.
Press the MENU button on your
remote control. Select CHANNEL
SETUP by pressing the Right/Left
movement button and confirm your
selection with OK button. Select
Auto Tuning tab by pressing the
Up/Down movement buttons and
press Right movement button or OK
button to confirm. Country Selection
menu will be displayed.
Select User Interface Options.
List Scrambled Channels will show.
Change “Auto” setting to “ON”
Press Exit button to exit the Menu.
6
You will need to rescan the digital TV
channels:
1
2
3
Press Menu.
Select Setup.
Select Auto Tuning and press the OK
button to start the channel scan and this
time store the Scrambled channels.
6.3.2-Manual tuning of digital
channels and storing in the memory
CHANNEL SETUP
Please select country and scan type, then press OK to start tuning
Press the MENU button on your
remote control. Select CHANNEL
SETUP by pressing the Right/Left
movement button and confirm your
selection with OK button. Select
Digital Manual Tuning tab by
pressing the Up/Down movement
buttons and press Right movement
button or OK button to confirm.
Digital Manual Tuning menu will be
displayed.
England
Country Selection
ATV
Scan Type
London GMT
Time Zone
Back
Select
Exit
Scroll to the Country Selection
tab by pressing the Up/Down
movement buttons and press Right/
Left movement buttons to select
Digital Manual Tuning
your country. Then, scroll to the Scan
Type tab by pressing the Down
VHF CH
9
Frequency
205 MHz
movement button and select ATV option by
pressing the Right/Left movement buttons.
Press OK button to confirm your selections.
Analogue channels are searched and stored
automatically. At the same moment, the
progress of auto tuning and the channels
stored in the memory are displayed in the
menu. Program Table menu is displayed at
the end of the Auto Tuning.
Poor Normal Good
Back
Exit
Select
Enter the channel number from the Manual
search menu using the numeric keys if you
know the channel number; if you don’t
know the channel number, you can perform
search by using right/left direction buttons.
Download from Www.Somanuals.c1om2. All Manuals Search And Download.
6.4.2-Manual tuning of analogue
channels and storing in the memory
Analogue Manual Tuning
System
I
6.4.2.1-If you already know the
Channel
C 4
channel number
Fine tuning
Search
+00
Select Analogue Manual Tuning by
pressing the Up/Down movement
buttons in the CHANNEL SETUP
menu and confirm by pressing the
OK button. Analogue Manual
Tuning menu will be displayed.
Programme no
Skip
1
No
Frequency
62.25 Mhz
Save
Select
Back
Exit
Analogue Manual Tuning
In the Program no tab, enter the channel
number where you would like to store the
searched channel. Select the system in which
you would like to make the search from the
System tab by pressing the Right/Left
movement buttons and move to the Channel
tab by pressing the down movement button.
Press OK on your remote control to select
“S”” band or “C”” band, scroll to the Search
tab by pressing the down movement button
and press Right/Left movement buttons
to start the search. Press the Red button
on your remote control to store the channel
you found. The channel will be stored to the
channel number of your choice.
System
I
Channel
C 4
Fine tuning
Search
+00
Programme no
Skip
1
No
Frequency
62.25 Mhz
Save
Select
Back
Exit
Select the system in which you would like to
make the search from the System tab by
pressing the Right/Left movement buttons
and move to the Channel tab by pressing
the down movement button. Press OK on
your remote control to select “S”” band cable
input or “C”” band aerial input and enter
the channel number with numeric buttons.
Move onto the Program No tab and enter
the channel number in which you would like
to have the channel stored. If the broadcast
viewed on the screen is of your desired
quality, press the Red button on your remote
control to store the action into memory.
The channel will be stored according to the
program number of your choice. You can
tune and store in memory other channels the
same way. In the event that you wish to exit
the menu for any reason, simply press the
EXIT button.
6.4.2.3-Fine Tuning
If the channel you found is not of the desired
quality and requires Fine Tuning, then
select the Fine tuning tab by pressing the
Down movement button in the Analogue
Manual Tuning menu. Using the Left/
Right movement buttons on your remote
control, adjust the broadcast displayed on
the screen to your desired quality. Under
normal circumstances, you will not require to
use the Fine Tune function. The AFC values
of your television will automatically adjust and
lock themselves to the channel. However,
you might need it in case the television
transmitters do not operate according to
the standards. Press the Red button on
your remote control to store the settings you
made.
6.4.2.2-If you do not know the
channel number
Select Analogue Manual Tuning by
pressing the Up/Down movement buttons in
the CHANNEL SETUP menu and confirm by
pressing the OK button. Analogue Manual
Tuning menu will be displayed.
6.5-Electronic TV Guide (EPG)
Electronic TV Guide is for Digital
broadcasts only. If it is supported
by the broadcasting enterprise, the
Electronic TV Guide gives general
information about all of the programs of the
next 8 days. To display the Electronic TV
Guide, press EPG button on the remote
control and EPG will be displayed.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
No Information
No Information
6.6-Program table
With the program table, you may list the
television channels, delete channels, create
favorites list, lock any channel you wish or
change the names of the analogue channels
according to your personal choice. Select the
Program Table tab by pressing the Down
movement button in CHANNEL SETUP
menu and confirm with the OK button.
Program Table menu will be displayed.
ALL CHANNELS
Wednesday 18 Jun 2008
14:45
Channel 1
No Information
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Info
Exit
Next Day
Reminder
Previous Day
Schedule List
Select
Programme table
Service Type
Important Note: Not all broadcasting
Network
enterprises supply a detailed TV guide. Most
of the broadcasting enterprises provide daily
program information, but they do not give
detailed explanations. Some broadcasting
enterprises, on the other hand, do not give
any program information at all.
CHANNEL SETUP
CA
FAV1
FAV2
FAV3
FAV4
SKIP
CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
CHANNEL 5
CHANNEL 6
CHANNEL 7
CHANNEL 8
CHANNEL 9
You may navigate through the channels by
P+/P-, or up/down movement buttons and
the broadcast stream of the channel you
select will be displayed on the right side. To
get further information about the program
press Info button and detailed information
about the selected program will be displayed.
To display the program information of the next
day press the right movement button followed
by the GREEN button and press RED button
to display the program information of the
previous day. You may add timer for any
program you like in the broadcast stream.
When the time of the relevant program
comes, a warning screen appears. To add
a timer to any broadcast you wish, select
the broadcast you want to add timer from
the EPG menu with the movement buttons
and press the BLUE button on your remote
control. Reminder menu will be displayed.
Move
Network
Back
Service Type
Next Page
Exit
Select
Delete
Prev. Page
6.6.1-Selecting the Service Type
You may select the service type by
pressing the “BLUE” button on your
remote control in the Program table
menu. The service type you have
selected appears on the upper left corner of
the menu. Service types are in the form of
“ALL TYPE” (all channels), “DTV (only Digital
channels), ATV (only Analogue channels)
and Radio (only radio channels). Only those
channels in the service type you select shall
be displayed on the Program table menu.
6.6.2-Creating and selecting favorites
list
Reminder
In your television you can create 4
favorite channel lists based on your
personal preferences. To do this,
18 Jun 2008 15:30
Program
Channel1
15
Clock
Minute
Mode
Date
select the channel you would like to
add in the favorite list by using the
31
Once
Wed.18
Jun
Up/Down movement buttons while
you are in the Program Table menu,
then select the favorite list into which
you would like to add the channel
by using the Right/Left movement
buttons and press the OK button.
Month
Schedule List
Back
Change
Exit
A “Heart” symbol will be displayed under
the favorite list to which you have added the
channel. You can add the channel you have
selected into more then one favorite list. You
can directly select the favorite channel list you
You can add Timer by entering the reminder
information and pressing the OK button.
You can display the Timer you have added
or delete a previously added timer in the
Schedule List menu.
Download from Www.Somanuals.c1om4. All Manuals Search And Download.
created. To do this, press the FAV button on
your remote control. Favourite List menu will
be displayed.
6.6.6-Skipping a stored channel
In the event that you do not wish to
see certain programs while navigating
through the channels using the
Favourite List
P+/P- buttons, then you can use
this function. Select the program
that will be hidden by pressing the
Up/Down or Right/Left movement
buttons, scroll to the Skip option
and press OK button to confirm.
SKIP will appear on the program
to be skipped. You may perform
this procedure for more than one
program. To view the skipped
ALL CHANNELS
FAV1
FAV2
FAV3
FAV4
Select one of the ALL CHANNELS, FAV1,
FAV2, FAV3, FAV4 lists by pressing the Up/
Down movement buttons and press OK
button to confirm.
program, directly enter the program
number using the numeric buttons
or select it from the Channel List menu. To
cancel the program skipping process, select
the “SKIP” option again. After setting is
complete, press the EXIT button to exit the
menu.
6.6.3- Relocating a stored channel
Select the channel you want to
relocate from the Program Table
menu with Up/Down buttons and
press the “GREEN” button on
your remote control. Select the
new channel number to which you
would like to move the channel by
pressing the Up/Down movement
buttons and press the OK button.
Your channel will be moved to its
new location. You may perform this
procedure for more than one channel.
Press EXIT button to finish the setting
process.
6.6.7- Renaming a stored analogue
channel
You can assign an analogue program
or programs of choice the names that
have a maximum of eight characters.
To do this, select the analogue
channel you want to rename from
the Program Table menu with Up/
Down movement buttons and press
the RED button on your remote
control. The colour of the tab where
the channel name exist will change
and a green box will appear around
the initial letter of the channel name;
choose the desired letter, number or
sign using the Up/Down movement
buttons. For the next character, press
the Right movement button and then
select the desired letter, number or
sign again with the Up/Down movement
buttons. After entering all the characters,
store the name you have written in the
memory by pressing the OK button. To write
names for any of the other programs, simply
repeat the above procedure. Press MENU
button to return to the previous menu or
press EXIT button to exit the menu after the
setting is complete.
6.6.4- Deleting a stored channel
Select the channel you want to delete
from the Program Table menu with
Up/Down buttons and press the
“YELLOW” button on your remote
control. The tab of the channel to be
deleted will become yellow. Press
GREEN button to delete the selected
channel or press RED button to
delete the whole channel list. Once
you pres the Green button, the
selected program is deleted and the
following channels are transferred to previous
program number. After setting is complete,
press the EXIT button to exit the menu.
6.6.5- Locking a stored channel
For this feature, please see page. 21-22
7.5-Parental Control
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Signal Information menu will be active
6.6.8-Channel List
only for Digital broadcasts.
If you press OK button when no menu is
open, Channel List menu will be displayed
on the screen.
6.8-CA Module (Conditional
Access)
In this menu, you can check the CA Module
settings. If a CI module is inserted for a
channel that has a scrambled broadcast, then
a submenu for that module is opened and the
information for that module is updated.
CHANNEL LİST
Channel 1
Channel 2
Channel 3
Channel 4
6.9-Active Antenna Power
When this feature is set to On, you can
connect an external antenna to your television
without needing any external source. Scroll to
the Active Antenna Power tab by pressing
the down movement button in the Channel
Setup menu and select On by pressing the
Right/Left movement buttons.
Exit
Select
You can see all the channels of the current
mode while you are in the Channel List
menu, you can select the desired channel
with Up/Down buttons and view it by
pressing the OK button.
6.7-Signal Information
This menu gives information about Channel,
Network, Modulation, Signal level and quality.
Press MENU button to enter this menu.
Select Channel Setup menu by pressing
the Right/Left movement buttons. Select
Signal Information tab by pressing the
Down movement button and confirm with
Right movement button or OK button. Signal
Information menu will be displayed.
Signal Information
Channel
Network
23
490 Mhz
XX Network
Modulation 2X 64XXX X2/3
Quality 60%
Signal Strength
90%
Exit
Download from Www.Somanuals.c1om6. All Manuals Search And Download.
7 The settings on your new television
7.1.3-Sound Type
7.1-Performing the Sound
settings
The program you watch may be broadcast
in stereo or in two different languages. Using
the Right/Left movement buttons in this
menu, you can select Mono/Stereo or Dual-1/
Dual-2.
You may perform Volume settings by using
the V+ or V- buttons on your television or the
VOL+/VOL- buttons on your remote control.
You can perform other Sound settings by
entering the Sound menu. To do this, press
the MENU button on your remote control,
select SOUND menu by pressing the Right/
Left movement buttons and press the OK
button. In this menu, you can select one of
the titles for which you would like to perform
an operation.
7.1.4-Sound Mode
If you would like to add some depth to the
sound of the program you are watching,
press Right/Left movement buttons to select
Normal or Spatial feature.
7.1.5-Equalizer
Select the EQUALIZER tab in the Sound
menu and confirm with the OK button. The
Equalizer menu is displayed.
SOUND
Volume
Balance
EQUALIZER
Off
L+R
Normal
AVL
<
<
User
Sound Type
Sound Mode
Equalizer
Headphone
Back
Select
Exit
Back
Exit
Select
7.1.1-Balance
To adjust the sound balance between the
right and left loudspeakers to the desired
level, select the Balance tab in the volume
menu by using the Down movement button.
Using the Left/Right movement buttons
adjust this option to the desired level.
Using the Right/Left movement buttons, you
may select either one of the preset Music,
Sports, Cinema and Speech options which
enhance the sound effect depending on the
feature of the program you are watching
or the User option which you can adjust
as you desire. To adjust the User option,
select User and press the OK button. You
can adjust the frequency levels with the Up/
Down movement buttons. You can select
one of the 120Hz, 500Hz, 1.5kHz, 5kHz and
10kHz frequency bands with Right and Left
movement buttons. Press the MENU button
to store the settings and exit the user option.
7.1.2-AVL (Automatic Volume
Limiting)
Television transmitters have different sound
levels. This can be noticed from the different
volume levels that can be heard while
switching from one program to another. Using
the Right/Left movement buttons, select
ON. The AVL (Automatic Volume Limiting)
function maintains the same sound level as
you switch from program to program. Select
Off to cancel it.
Note: You can select the equalizer
options directly by pressing the (
button on your remote control.
)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
the Advanced Picture Settings menu. The
changes you have made in the PICTURE
menu will be stored in the memory without
requiring any other operation.
7.1.6-Headphone
By connecting headphones to your television
you can listen to the program sounds
independently from your television. To turn up
and down the headphone volume level, select
Headphone tab from the Sound menu and
adjust the volume level by using the Right/Left
movement buttons.
7.2.2-Picture Mode
You can select either one of the
four non-adjustable settings in the
memory or one of the user options
by pressing the ( ) button on your
remote control. Vivid, Natural, Cinema and
Sports are default values; USER represents
the values you stored in memory.
Note 1: The settings you have made in the
Sound menu will be stored in the memory
without requiring any other operations.
Note 2: When you want to hear the sound
from the headphone only, just press the
MUTE button on your remote control.
7.2.3-Colour Temperature
Colour intensity of the picture can be
adjusted with this feature. Select Colour
Temperature tab from the picture menu by
pressing the Up/Down buttons to activate
this feature and then select one of the Cool,
Normal or Warm options by pressing the
Right/Left buttons.
7.2-Performing the Picture
settings
7.2.1-Picture Menu
You can perform Picture settings by entering
the Picture menu. To do this, press the
MENU button on your remote control, select
PICTURE menu by pressing the Right/
Left movement buttons and press the OK
button. In this menu, you can select one of
the titles for which you would like to perform
an operation.
7.2.4-Tint
When NTSC video is input via Scart, you may
make Hue settings. The tint option is not seen
in the menu when you have not input this type
of a video. When a NTSC video is connected
via the Scart, this option becomes active and
it is available in the menu.
7.2.5-Advanced Picture Features
You can adjust advanced picture features
of your television from the Advanced Picture
Settings menu under Picture menu.
PICTURE
Picture Mode
Brightness
User
Contrast
Colour
Sharpness
Colour Temperature
Warm
Back
Exit
Select
PICTURE
High
High
High
High
High
Off
DNR
MPEG NR
You can select the desired setting by
Vibrant Colour
Perfect Clear
Dynamic Contrast
Dynamic Backlight
Backlight
pressing the Up/Down movement buttons
and adjust their levels with Right/Left
movement buttons. You can adjust Picture
Mode, Brightness, Contrast, Colour,
Sharpness and Colour Temperature levels
as you desire. You can adjust the DNR,
MPEG NR, Vibrant Colur, Perfect Clear,
Dynamic Contrast, Dynamic Backlight
and Backlight options as you desire from
Back
Exit
Select
Download from Www.Somanuals.c1om8. All Manuals Search And Download.
movement buttons and select one of the
Auto, Daylight, Night or Off options with
Right/Left movement buttons. When the
Dynamic Backlight is set to Off, Backlight
option becomes active. Backlight option
is not accessible when other options are
selected.
7.2.5.1-DNR (Noise reduction)
You may reduce interference and noise
formed in the picture by using this feature.
Select DNR tab with the Up/Down
movement buttons to activate this feature and
select one of the Off, Low, Normal, High
or Auto options with Right/Left movement
buttons.
7.2.5.7-Backlight
Note: Noise reduction function is only
effective in weak broadcasts.
With this feature, you can adjust the intensity
of light reflected to the LCD Panel. To do this,
select Back Light tab with the Up/Down
movement buttons and adjust the level as you
desire with Right/Left movement buttons.
7.2.5.2-MPEG NR
You can remove the artifacts that appear in
the picture as square shaped blocks by using
this feature. Select Mpeg NR tab with the
Up/Down movement buttons to activate this
feature and select one of the Off, Low, Mid
or High options with Right/Left movement
buttons.
7.2.6-Picture Format
With this option, you can view the broadcast
you watch in a format of your choice. You
can view the broadcasts in Auto, 16:9,
4:3, Subtitle, Letterbox, Panorama or 14:9
formats. 16:9 or 4:3 formats can be selected
in PC modes. In that case, the name of the
selected picture format will be displayed in the
centre of the screen.
7.2.5.3- Vibrant Colour
With this feature you can automatically adjust
colour saturation according to the scene. To
do this, select Vibrant Colour tab with the
Up/Down movement buttons and select
one of the Off, Low, Mid or High options
with Right/Left movement buttons. With
the ‘High’ option you can obtain the most
saturated colours.
7.2.6.1- Auto
Some movie channels may broadcast in
the 16:9 format. If you would like to see this
format automatically, then select Auto. In that
case, Auto appears on your screen.
7.2.5.4- Perfect Clear
With this feature you can automatically adjust
black level of the picture according to the
scene. To do this, select Perfect Clear tab
with the Up/Down movement buttons and
select one of the Off, Low, Mid or High
options with the Right/Left movement
buttons.
7.2.6.2-16:9
Please use this setting for watching wide
screen DVDs, wide screen video cassette
or 16:9 formatted broadcasts. Since various
screen formats such as 16:9, 14:9 and etc.
are used, black stripes might be formed on
the lower and upper parts of the screen.
7.2.5.5-Dynamic Contrast
This feature allows making brightness settings
according to the picture. A brighter or dimmer
picture can be sent to the screen according
to the brightness level of the picture. Thus, a
wider effect is obtained in terms of contrast.
Select Dynamic Contrast tab with the Up/
Down movement buttons to activate this
feature and select one of the Off, Low, Mid
or High options with Right/Left movement
buttons.
7.2.5.6-Dynamic Backlight
With this feature you can automatically adjust
backlight strength according to the average
brightness in the scene. To do this, select
Dynamic Backlight tab with the Up/Down
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Since the use of certain functions in
order to change the picture sizes for collective
projection or commercial purposes (modifying
the height and width etc.) will be deemed an
infringement of the picture’s copyright, legal
proceedings can be carried out as required
under relevant laws.
7.2.6.3-14:9
This is a movie format.
7.2.6.8-Overscan: Off
When this mode is selected, high defined
picture from the HDMI is not cropped and it is
displayed in its original size. This is only active
in HDMI mode and for resolutions at or above
720p.
7.2.6.4-4:3
Use this setting to watch the broadcasts in
the 4:3 format.
7.3-Performing the timer
settings
Your television is equipped with the feature
of being able to be turned off and on at
periods that you specify. Press the MENU
button. Select TIMER menu by pressing the
Right/Left movement buttons and press OK
button. In this menu, you can select one of
the titles for which you would like to perform
an operation.
7.2.6.5-Subtitle
If the subtitles are transmitted in the “16:9
formatted” broadcast, then this setting will
push the picture upwards in order to ensure
the entire written text to be seen.
7.2.6.6-Letterbox
TIMER
While watching a “16:9 or Cinemascope
formatted” film or video cassette, this setting
will eliminate or minimize the black stripes on
the background by zooming in the picture
without diffusing it.
Clock
Off Time
22 / Sep 2008 14:11
Off
On Time
Off
Off
On
Sleep Timer
Auto Sleep
Time Zone
London GMT
Back
Select
Exit
7.3.1-Clock
7.2.6.7-Panorama
Current time and date information must
be entered from the clock tab. To do
this, select the CLOCK tab and confirm
with the OK button. The Clock menu is
displayed. Select Day, Month, Year, Hour
and Minute by pressing the Up/Down
movement buttons and enter the required
information for each of them using Left/
Right movement buttons. Press MENU
button to return to the previous menu or
press EXIT button to exit the menu.
This setting will enlarge the image to fit the
screen by stretching the image horizontally
while holding the correct proportions at the
centre of the image. Some distortion may
occur.
Download from Www.Somanuals.c2om0. All Manuals Search And Download.
7.3.2-Off Time
7.4-Options menu settings
Select the Off Time tab by pressing the Up/
Down movement button in TIMER menu
and confirm your selection with the Right
movement button or OK button. In this menu,
you can set the off time for your television
with weekly or daily periods.
Press the MENU button on your remote
control. Select OPTIONS by pressing the
Up/Down movement buttons and press the
OK button. You can select the titles for which
you would like to perform an operation in
this menu by using the Up/Down movement
buttons.
7.3.3-On Time
Select the On Time tab by pressing the Up/
Down movement button in TIMER menu
and confirm your selection with the Right
movement button or OK button. In the On
Time menu, you can set the on time for your
television with weekly or daily periods. In this
menu, you select one of the TV, DTV or Radio
modes, a specific channel and the volume
that would become active when the TV is
turned on.
OPTIONS
Language Settings
Restore Factory Defaults
Country
Game Mode
Software Update
England
Off
7.3.4-Sleep Timer
Sleep Timer switches your television
automatically to Standby Mode after the
preset time has elapsed. You can adjust
this time between 10 and 240 minutes with
certain intervals. To do this, select the Off
Time tab and press Right/Left movement
buttons to select the desired time.
Back
Select
Exit
7.4.1-Language Settings
Select Language Settings from the
Options menu and press the OK button.
The Language Settings menu is displayed.
You can adjust the Menu language, Audio
language and Subtitle language from this
menu. Audio and Subtitle languages can only
be selected when they are supported by the
broadcaster. Unless you make any selection,
the language supported by the broadcaster
will be selected automatically. You can select
the Language Settings, Audio Languages,
Subtitle Languages and Hearing Aid tabs
and set the desired values by pressing the
Right/Left buttons. When the Hearing Aid
option is set to On, the Subtitles will appear in
the language transmitted by the broadcaster if
the Broadcasting company transmits Subtitles
specifically. If the Hearing Aid is set to Off, the
language selected in the subtitle languages
option in the menu will be active.
7.3.5-Auto Sleep
Auto Sleep option can be set to on or off.
When the Auto Sleep function is set to Off,
NO SIGNAL will appear on the screen when
the TV does not receive any signal from any
source and your television will not be turned
off. When the Auto Sleep function is set to
On, NO SIGNAL will appear on the screen if
the TV does not receive any signal from any
source and the countdown OSD of 5 minutes
will appear. Television is turned off at the end
of the time.
7.3.6-Time Zone
Select the Time Zone tab by pressing the
Up/Down movement buttons in Timer menu
and select your current time zone with the
Right/Left movement buttons.
7.4.2-Restore Factory Defaults
You can switch your television back to factory
settings with this feature. Select Restore
Factory Defaults tab and press the OK
button. Confirmation screen will be displayed.
In this screen, you can restore the factory
settings of your television by selecting the
Yes option with Right/Left buttons or cancel
this action by selecting the No option.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4.3- Country
7.5-Parental Control
You can not access the Country option from
the Options menu. The country selected
during the initial use will automatically
displayed in the menu.
7.4.4- Game Mode
In the Options menu, you can set the Game
Mode tab to On/Off by pressing the Right/
Left buttons. When the Game Mode is set to
On, display settings will return to the default
values.
Game Mode becomes active only for PC,
HDMI and YPBPR sources. When the Game
Mode is set to ON for these sources, picture
mode in the Picture menu will switch to the
Game Mode. Only colour temperature and
backlight settings can be changed in this
mode. Game Mode provides a considerable
increase in the picture quality when the TV is
used as a monitor for game consoles and for
displaying the text files. It is advised to turn
this mode off when you would like to watch a
movie from the above mentioned sources.
PARENTAL CONTROL
Lock System
Set PIN
Off
Block Programme
Parental Guidance
Off
Off
Panel Lock
Back
Select
Exit
In the Parental Control menu, you can
preclude channels that are not appropriate for
children and set age restriction for programs
being broadcasted. Password screen will be
displayed when entering this menu. The menu
will open only when the correct password is
entered. The default password is set as 0000.
You can change the password from the Set
PIN menu as you wish.
7.4.5-Software Update
When a new software is found through OAD
(On Air Download) from this menu, it will
be installed automatically. Select Software
Update tab and press the OK button. Your
television will start to search for a new
software and perform the software install
process if a new software exists.
7.5.1-Lock System
When the Lock System feature is set to On ,
a password is prompted if you want to enter
in the Auto Tuning, Digital Manual Tuning,
Analogue Manual Tuning submenus in the
Channel Setup menu and the Program
Table menu. These menus are not accessible
unless the correct password is entered.
Note: Software Update tab is not displayed in
the Analogue mode.
7.4.6-Decoder Setting
7.5.2-Set PIN
You can set the Decoder Setting tab to On/
Off by pressing the Right/Left movement
buttons. When it is set to ON, RF signal
will be output from the SCART output. This
option must be set to ON when a Decoder
is connected to SCART. When this option
is set to OFF, RF signal will not be output
from the SCART output. This option appears
in the menu when the Signal Source is set
to SCART. It is not displayed in the menu in
other options.
You can change your Parental Control
password from this menu as you wish. To do
this, select Set PIN tab and press OK button.
Set PIN menu will be displayed. Once you
enter your new password two consecutive
times, your password will be changed.
7.5.3-Block Programme
With the Block Program feature, you can
lock the desired channel and prevent it from
being viewed unless the correct password
is entered. To do this, select Block
Programme tab from the Parental Control
menu by pressing the UP/Down movement
buttons and confirm your selection with
OK button. Block Programme menu will
be displayed. Select the channel you want
Download from Www.Somanuals.c2om2. All Manuals Search And Download.
to block from the Block Programme menu
with Up/Down buttons and confirm with the
GREEN button on your remote control. A
lock symbol will appear next to the channel
name. When a blocked channel is selected,
the password screen will be displayed and
the channel will not appear until the correct
password is entered. If you do not enter the
password, CH BLOCKED will be displayed
on the screen. There will also be a lock
symbol next to the blocked channel in the
Program Table. Repeat the same steps to
remove the blocking.
7.6.2-Freeze (Freeze picture)
You may freeze the program picture
you are watching with this feature.
For this, press the Timeshift button
on your remote control. The program
picture will freeze until the same button is
pressed a second time. Freeze: On, Freeze:
Off OSD will appear each time you press the
Timeshift button.
7.6.3-Picture and Teletext (PAT)
With this feature, you can follow the
teletext broadcasts simultaneously
7.5.4-Parental Guidance
with the current program, provided
that the current program contains
If it is supported by the broadcaster,
this feature allows you to enter an age
restriction between 4 and 18 for the
programs broadcasted. If the program to be
broadcasted is over the age restriction you
entered, the channel will not be displayed and
a password screen will appear. To view the
program, correct password must be entered.
Enter an age limit between 8 and 18 from the
Parental Guidance tab in order to activate this
feature.
teletext broadcast. For this purpose,
when you press TXT and then 16:9 buttons
in a channel with teletext broadcasting, the
screen will be split into two with the left pane
showing the currently watched program and
the right pane will show the Teletext at the
same time. In the event that you wish to exit
the PAT mode for any reason, simply press
the TXT button.
7.5.5-Panel Lock
If this feature is turned On, the control buttons
on your LCD Television will be locked and
will not function. When it is set to off, control
buttons will become active.
7.6-Other picture features
7.6.1-Zoom
Press the ZOOM button on your
remote control while watching a
channel to activate this feature. The
image is zoomed in 3 stages oriented
to the centre.
Note:Zoom feature is aborted when the
channel is changed.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Teletext
8.4-Page enlarge button (DOUBLE)
Being one of the most prominent services
of broadcasting today, Teletext renders the
TV more fruitful. Teletext means in short the
transmission of various updated information
along with the TV broadcast signal in the form
of text and graphics. To be able to receive
a quality teletext broadcast, a good antenna
system and a broadcast signal that is not
weak, with no reflections and interference
from other channels are required. Even in
a very clear reception, it is normal for some
characters or tabs to be lost. Such conditions
will automatically be improved in a short time
under normal circumstances.
You can view the upper half of the
teletext page in an enlarged format by
pressing the DOUBLE button on your
remote control. To be able to view
the bottom half of the enlarged page, press
the same button for the second time. Once
you press the same button the third time, the
page will be restored to its normal size.
8.5-Page Stop (STOP)
Some information is laid out by the
broadcasting agency in multiple
pages and it is broadcast in an
automatic cycle mode. For example,
on a text of four pages, the pages are
indicated with the figures 01, 02, 03 and
04 on the bottom of the page. To view one
of these pages for a longer time, press the
STOP button. When you press the same
button again, the cycle continues.
8.1-Entering the Teletext Mode
In order to switch your television to the
teletext broadcast, please press the TXT
button in a program that has a teletext
broadcast. To switch back to the television
broadcast, press the TXT button for two
consecutive times. Once you have switched
to the teletext broadcast, the initial page that
appears will be the index page. P100 In this
page, the titles of the topics in the teletext
broadcast and the initial page numbers will
appear.
8.6-Subpage selection (SUB)
If the page of text you are viewing
contains sub pages the page
numbers starting from 01 appear on
the screen. You can switch to the sub
pages with the SUB button. In this
case, subpage selection will appear
next to the page number in the upper
left corner in 0001 format; you can
either directly enter the number of
the subpage you want to display with
number keys or select the subpages
one by one by pressing the RED/
GREEN buttons. You can exit the sub page
by pressing the SUB button again.
8.2-Page Selection
To be able to view the page you
would like on the screen, type in
the number of that page using the
numerical keys. You can see the
number you have entered on the left
side of the upper title tab. When you would
like to turn the pages one by one, you can
go to the next page pressing the Up/P+
button and to the previous page pressing the
Down/P- button. Press the INFO button to
return to the Index page.
8.3-Teletext image in the TV picture
(MIX)
With this feature, you can watch
the teletext information and the TV
broadcast together. Thus, you can
follow the teletext broadcast of the
channel while you watch the TV
broadcast. To do this, press TXT
button two times consecutively in a channel
with Teletext broadcast.
Download from Www.Somanuals.c2om4. All Manuals Search And Download.
8.7-Temporary TV Picture (UPDATE)
8.10-Fastext
This button allows you to switch to
the television picture while the page
you want is being searched in the
The coloured buttons on the remote control
are for the fastext feature. When you select
any page, the titles on various subjects may
appear on the screen in four different colours
or inside coloured frames (red, green, yellow
teletext broadcast eliminating the
need to wait during the search. You may
switch to the television picture by pressing the and blue). By pressing the button pertaining
UPDATE button while Teletext is searching
for your desired page. Once the page you
want is found, the number of that page
appears on the screen.
to the relevant colour on the remote control,
you can access the subject of your choice
without waiting.
Note: The fastext feature is not available for
all teletext broadcasts. It is determined by
the broadcasting agency whether it is to be
broadcast or not.
8.8-Question - Answer Button
(REVEAL)
Sometimes, a teletext page contains
a hidden answer such as a game or
a riddle. Press the REVEAL button to
disclose the hidden answer.
8.9-Clock
The Clock function of the SIZE
button; press the SIZE button when
you want to learn the time while
watching any television channel. In
that case, a clock will appear on the lower
right corner of the screen. You can remove
the time information from the screen by
pressing the same button.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
9
External Equipment Connections
Your TV is equipped with 9 inputs including antenna input, which allows for the external device
connection. These inputs are:
1-Aerial input
2-SCART input
3-AV input
4-S-Video input
5-PC input
6-HDMI1 input
7-HDMI2 input
8-YPbPr Component input
9-CI slot input
You can connect your external device supporting the suitable inputs to your TV via these
inputs. By pressing the SOURCE button on your remote control, select the external source
input to which you connected your device.
Side view of the TV
9.1-Headphone Connection
The headphones must have
impedance between 8 and 32
ohms and have a 3.5 mm stereo
jack plug. Plug the headphone
jack into the headphone socket
of the TV.
9.2-Connecting an external device via Scart connection
VCR
or
or
DECODER
Rear or side view of the TV
DVD
SCART : To watch the picture of the broadcast
device connected to SCART, select Scart from
the Source menu and press OK button. (You
can watch via this Scart if the connected device
has a RGB output).
SATELLITE RECEIVER
GAME CONSOLE
Download from Www.Somanuals.c2om6. All Manuals Search And Download.
9.3-Connecting external equipment via AV connection
Side view of the TV
CAMERA
DECODER
DVD
SATELLITE RECEIVER
AV : To watch the picture of the broadcast device connected
using the RCA (Phono) input, select AV option from the Source
menu and press OK button. Your TV will switch to the selected
source.
GAME CONSOLE
9.4-Connecting an external device via S-Video connection
Side view of the TV
CAMERA
DECODER
DVD
SATELLITE RECEIVER
S-Video: To watch the picture of the broadcast device
connected using the SVHS input, select S-Video option from the
Source menu and press OK button. Your TV will switch to the
selected source.
GAME CONSOLE
9.5-Connecting an external device via YPBPR connection
Rear view of the TV
Picture connection
DVD
Audio connection
YPBPBR (Component Input): When a connection is made via YPBPR socket, select YPBPR
option from the Source menu and press the OK button. Your TV will switch to the selected
source.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
9.6-Connecting an external device via HDMI connection
DVD
Rear or side view of the TV
SATELLITE RECEIVER
HDMI: When a connection is made via HDMI socket, select the
HDMI input through which you have made the connection from the
Source menu and press the OK button. Your TV will switch to the
selected source.
GAME CONSOLE
Connect to the HDMI input at the back of your TV by using the connector located on your PC
or your digital video-transmission device with a suitable cable (not supplied with the TV).
Note1: To be able to watch an image in the HDMI mode, your computer must be equipped
with a HDMI graphic card.
Note2: Please adjust the video card settings of your PC if the PICTURE does not fit to the
screen when you transfer the picture to your television from a PC with a DVI to HDMI or HDMI
to HDMI cable.
You may display the resolution information by pressing the INFO button.
9.6.1-HDCP
Your TV supports HDCP feature. To use this feature, you must set up a connection to your
TV set’s HDMI video port and select HDMI by pressing the SOURCE button on your remote
control.
NOTE:In HDMI mode; some resolutions are supported when a DVI to HDMI converter cable
from a PC is used. Only 16:9, 4:3, 14:9 (some definitions) are supported as picture format.
9.6.2-High Definition - HD-READY
Your television can receive high-definition signals (HDTV). You can connect the
input sources (HDTV set-top box or HDTV DVD player) to the (HDMI) socket (digital
HDTV signal). This ensures that you can view digital HDTV programs, even if they
are copy-protected (HDCP High-Definition Copy Protection).
9.7-PC connection
Picture connection
Audio connection
Rear view of the TV
9.7.1-PC Connection:
Connect the D-Sub15 connector to the PC-IN socket at the back of your television by using
an appropriate cable (not supplied with your television). Again, by using an appropriate cable,
connect the audio output of your PC to the PC AUDIO-IN at the back of your television to
listen to sounds from your PC and you can adjust the volume level of your source by using
VOL+/VOL- buttons.
Download from Www.Somanuals.c2om8. All Manuals Search And Download.
9.7.2-Switching to the PC mode
For your LCD-TV to switch to the monitor (PC) mode, press the SOURCE button on your
remote control. SOURCE menu will be displayed. Select PC by pressing the Up/Down
movement buttons and press the OK button.
9.7.3-PC Access Setting
Enter into the SETUP menu from the Main Menu by pressing the MENU button in the PC
mode. In order to make the necessary settings in this menu, you can select the headings with
the Up/Down buttons on your remote control to perform the following monitor-related settings.
9.7.4-Auto Position
The most suitable geometric settings in accordance with the entry mode are configured by this
function. For this operation, just select the Autoposition tab and press OK button.
9.7.5-Horizontal Position: Horizontal position setting.
9.7.6-Vertical Position: Vertical position setting.
9.7.7-Size: This is the pixel clock frequency. User can narrow down or enlarge the display by
selecting a desired value.
9.7.8-Phase: Using the Right/Left movement buttons, you can ensure that the colours and
shapes are exactly consolidated on the PC image.
9.7.9-PICTURE FORMAT
You can select the PC image to be displayed in 16:9 or 4:3 formats.
9.8- Inserting the CI (Common Interface) card
CI module and Smart card allows you to viesome scrambled (paid) channels in Digital
TV mode. When no CI module is inserted in your television, you can only view the current
unscrambled digital/analogue channels.
9.8.1-Inserting the CI Module and Smart card
You can not use the smart card in your television independently. You will need a CAM module
to use the smart card. Insert your smart card into the CAM module and then insert the CAM
Module into the CI slot on your television. When you insert the module correctly, CA Module
Inserted appears on the screen and the menu for this module is displayed.
Rear or side view of the TV
9.8.2-Removing the CI Module and Smart card
When removing the Smart card, make sure that you pull the CAM module out completely with
the card inserted. CA Module Inserted will appear on the screen.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Help and tips
Failure
Possible cause
Solution
Is the power cord connected to the
mains supply?
Check the power cord.
The television does not function
Is the Power On/Off button on?
Check if the On/Off button is on.
Check the antenna cable.
Is the antenna cable connected?
If you are using a satellite antenna, is it
well adjusted?
Have the antenna adjusted.
Antenna may be affected by two
connected external devices.
Poor picture quality
Try disconnecting one of the devices.
Perform fine tuning.
It may need fine tuning.
Adjust Brightness, Contrast and
Colour.
Picture settings are not correct.
Perform automatic, manual channel
setting or fine tuning.
Channel setting
Antenna
Shadow and reflection in the
picture.
Check antenna cable and system
Check the antenna cable.
Is there any damage to the antenna
cable?
No picture
No colour.
Are you sure you pressed the correct
button on your remote control?
Press the PR+ or PR- button to turn
on the TV.
Colour intensity level is at the lowest
setting.
Lighten the colour.
Broadcast system setting (if setting
choice is available)
Select the broadcast system.
Test with another channel.
Problem in channel broadcasting.
Television channel (no teletext) or
antenna system.
Test another channel for fine tuning and
shadowy pictures
No or defective teletext
No sound
Very weak signal
Check the antenna system.
Temporary sound mute may be on
Try pressing the mute button
Is the sound turned down?
Are the batteries correctly placed?
Are batteries exhausted?
Turn on the volume with Vol + button.
Place the batteries correctly.
Replace the batteries with new ones.
Remote control does not work
Is there any obstacle between the
remote control and television?
If yes, remove it.
Picture is not visible after turning
on the TV
Child lock is active.
Disable the child lock.
If your television does not work properly even though you tried the above mentioned solutions,
try turning it on and off again. If you cannot start your television even though you have applied
all noted methods, refer to the dealer or authorised service from where you purchased the
product. Never attempt to repair a faulty device yourself.
Download from Www.Somanuals.c3om0. All Manuals Search And Download.
11
Technical Specifications Chart
SCREEN SIZE
32”
32”, 16:9
Active matrix
TFT
Panel type
Sound output
2x10 W
Power consumption
Stand by power value
SCART input
140 W
<1 W
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Audio/Video Phono input
S-Video socket
HDMI input 1/2
YPBPR input
VGA input
PC Audio input
CI Slot Input
Standard
Dimensions (WxDxH)
800x200x594
Weight (Kg)
11,9
General technical specifications
Power supply AC:
Program memory:
RF Aerial input:
230V 50 Hz
100
75 Ohm (Co-axial)
8 Ohm
Loudspeaker impedance:
Sound systems:
Batteries:
Mono / Stereo
2xUM - 4, IEC R03 or AAA 1.5V
VHF (Band I Channel 2-4)
VHF (Band III Channel 5-12)
UHF (Channel 21-69)
Cable TV (S1-S20/S21-S41)
Channels received:
Design and specifications may be changed without prior notification.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
12 MAIN UK TRANSMITTER STATIONS
UHF CHANNELS
Regional Main stations
North West
Caldbeck
STATIONS CT D
BBCI
BBC2
ITV
CH4
CH5
Map
BBCI
BBC2
ITV
CH4 CH5 Map
30
55
68
34
62
66
28
59
48
32
65
56
56
48
56
12
15
45
Bluebell Hill
Crystal Palace
Dover
Oxford
East
Sandy Heath
Sudbury
Tacolneston
Scotland
Angus
40
26
50
49
46
33
56
52
43
23
66
64
65
30
53
67
29
28
30
31
Winter Hill
37
Douglas (IOM)
North
Belmont
Emley Moor
North East
Bilsdale West Moor
Chalton
Pontop Pike
Midlands (West)
Ridge Hill
Sutton Coldfield
The Wreckin
Mindlands (East)
Waltham
South West
Beacon Hill
Caradon Hill
Huntshaw Cross
Redruth
Stockland Hill
Channel Islands
Fremont Point
West
Mendip
South
Hannington
Midhurst
Rowbridge
22
44
28
51
25
47
32
41
56
37
17
16
31
51
62
27
44
55
24
41
59
21
47
65
39
35
52
25
26
24
33
39
58
26
45
64
29
49
61
23
42
54
35
14
11
13
56/58
57
63
60
43
24
23
25
23
43
23
49
24
59
53
50
21
29
32
29
50
29
42
21
65
37
6
Black Hill
Cragkelly
Darvel
40
31
33
22
33
40
33
39
31
46
27
26
28
26
46
26
45
27
37
48
35
67
8
22
46
26
28
40
33
25
43
23
32
50
29
35
37
25
23
22
20
7
9
Durris
5
Eitshal (Lewis)
Keeylang Hill
Knock More
Rosemarkie
Rumster Forest
Selkirk
49
1
58
64
61
54
35
21
4
57
22
55
51
33
63
28
62
44
26
60
25
59
41
23
53
32
65
47
29
37
38
40
39
36
3
2
67
37
55
62
52
56
10
Wales
Blaenplwyf
Carmel
31
57
57
52
46
44
27
63
63
45
40
51
24
60
60
49
43
41
21
53
53
42
50
47
44
42
19
18
43
51
58
44
64
41
61
47
54
Uanddona
Moel-y-Parc
Presely
37
35
35
37
Wenvoe
41
39
61
31
45
55
24
42
58
27
66
68
21
34
32
33
N.IRELAND
Brougher Mountain
Divis
22
31
55
28
27
62
25
24
59
32
21
65
37
31
47
46
48
Limavady
Download from Www.Somanuals.c3om2. All Manuals Search And Download.
13 Guarantee - Television
Your new television is guaranteed against the cost of breakdown repairs for twelve
months from the date of the original purchase.
What is covered?
• All repairs necessary as a result of faulty materials,defective components or
manufacturing detect.
• The cost of all functional replacement parts,excluding remote control batteries
• The labour costs of a Beko approved repairer to carry out the repair
• You may be offered a replacement instead of repair under guarantee.
You dealer will advise you.
What is not covered?
• Transit or delivery damage
• Accidental damage
• Misuse, or abuse.
• Cabinet or appearance parts,including knobs and flaps
• Remote control batteries.
• Repairs or replacements required a a result of unauthorised repairs or inexpert
installation that fails to meet the requirements contained in the user instruction book.
• Repairs or replacements to product installed or used on commercial or non-
household premises.
Important notes.
• The product is guaranteed for domestic household use only.
• The guarantee will be void if the product is installed or used in commercial or non-
household premises.
• The product must be correctly installed and operated in accordance with the
instructions contained within the Operating Instructions Booklet provided with the
product.
• The guarantee is given only within the boundaries of the United Kingdom and the
Republic of Ireland.
• The guarantee is not transferable if the product is resold.
• Beko Plc disclaims any liability for incidental or consequential damages.
• The guarantee does not in anyway diminish your statutory or legal rights.
Beko House,Caxton Way,Watford,Herts,WD18 8UF,Tel: 0845 600 4911
33
Download from Www.Somanuals.com. All Manuals Search And Download.
13 HOW TO OBTAIN SERVICE
Congratulations on your choice of a Panache colour television.Your new television has
been designed and manufactured to the highest quality stadards to give you many years
of use.To get the best out of it,please take a few moments to read the instruction book.
Your television is supplied with a full 12 months guarantee,covering parts and labour.
Should you require service under guarantee,simply call the number below (**see note for
small screen sets)
0845 600 4911
Our service receptionist will ask you for your product model number,your retailer’s
name,and the date of purchase when you call.It will assist you if you complete the box at
the bottom of this page when you take delivery of your television so that the information
is readily available should you need it. If it is necessary for an engineer to visit your home
he will normally be there within 48hrs of receipt of your call (excluding Bank Holidays) or at
your earliest convenience.
Before telephoning for service please check the trouble shooting guide in the instruction
book as often minor problems are easily identified and resolved by following the
instructions contained there in.Service visits where there is no fault with the product could
incur a charge even through the product is under guarandtee.
Service is also available on the above number after the guarantee period has expired.The
cost of any repairs outside of the guarantee period is payable to the engineer at the time
of visit.
Please complete the box below for ease of reference later.
Model Number
Serial Number
DaPurchase
Pleaf Purchase
Please keep your purchase receipt.The engineer will ee it should you require service under the
12-month Guarantee.
***Special Note:
In home repair servicie is not available on models with a screen size of 21” or under.You
should contact your retailer for advice and assistance on these models..
Download from Www.Somanuals.c3om4. All Manuals Search And Download.
Y1V.801
Download from Www.Somanuals.com. All Manuals Search And Download.
|