Behringer Speaker B208D User Manual

Professional Powered Speakers  
EUROLIVE  
B215D/B212D  
B210D/B208D  
EUROLIVE D Series — 550/200-Watt  
2-Way PA Speaker Systems  
with 15"/12"/10"/8" Woofer and  
1.35" Aluminum-Diaphragm  
Compression Driver  
High-power 2-way PA sound  
reinforcement speaker systems for  
live and playback applications  
B215D/B212D: 550-Watts  
B210D/B208D: 200-Watts  
Finally, great-sounding active  
loudspeakers that won’t break your back  
or bank account!  
system. The integrated sound processor  
provides total system control, along with  
dependable protection of the LF and HF  
transducers, thanks to the built-in active  
high-pass filter, which virtually eliminate  
distortion — even at extreme operating  
levels. In addition, all four models feature  
an Ultra-Low Noise (ULN) Mic/Line input  
with LEVEL control and a dedicated 2-band  
EQ (bass/treble) for easy control.  
Ultra-compact lightweight systems  
deliver excellent sound even at  
extreme sound pressure levels  
Thanks to our revolutionary  
Class-D amplifier technology and  
Revolutionary Class-D amplifier  
technology yields enormous power,  
incredible sonic performance and  
super-light weight  
internal switch-mode power supplies,  
EUROLIVE D Series loudspeakers provide  
a much better power-to-weight ratio  
than competing active speakers. Put  
simply, you get all the power without  
the backbreaking weight. And the sound  
quality of these lightweight loudspeakers  
exceeds that of our extremely popular  
EUROLIVE B212A and B215A systems —  
plus we’ve included two 200-Watt models,  
the B210D (10") and B208D (8") for less  
demanding applications.  
Internal switch-mode power  
supply for noise-free audio, superior  
transient response and very low  
power consumption  
Intelligent by design  
One of the coolest things about  
active loudspeakers is the lack of back-  
breaking racks of amps, crossovers and  
EQs that are often required to make  
passive speaker systems sound almost  
as good. But that comes with a trade-off  
— that extra weight is transferred to the  
loudspeaker, making it difficult for a single  
user to heave all that mass onto the top  
of a speaker stand.  
Integrated sound processor for  
ultimate system control and speaker  
protection with active variable  
high-pass filter  
Due to their high-efficiency design,  
they crank out 550/200 of the cleanest,  
punchiest audio Watts you’ve ever  
heard from a compact loudspeaker  
Extremely powerful, handmade  
long-excursion driver provides  
incredibly deep bass and  
acoustic power  
Continued on next page  
B215D: 15"  
B212D: 12"  
B210D: 10"  
B208D: 8"  
State-of-the-art 1.35" aluminum-  
diaphragm compression driver for  
exceptional high-frequency  
reproduction  
Ultra-wide dispersion via  
large-format exponential horn  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Page 3 of 5  
EUROLIVE  
B215D/B212D  
B210D/B208D  
¼" input jack  
for balanced  
TRS and  
unbalanced TS  
connections  
LEVEL control  
with CLIP LED  
for optimizing  
input signal  
level  
MIC/LINE input  
jack with internal  
microphone  
cause audible distortion. BEHRINGER didn’t invent  
Class-D technology, but our R&D Department has  
been working for years to perfect our own version  
with all the benefits of reduced weight and cool  
running, and none of the drawbacks. That’s why  
we invested over a solid year of research time  
eliminating pitfalls like quantizing errors and  
excess dead time, selecting just the right switching  
frequency (and other equally tech-y terms).  
And why we spent an equally long time testing  
individual components to ensure they will stand up  
to the rigors of the real world.  
preamplifier for  
balanced XLR  
connections  
EQ HIGH &  
LOW shelving  
equalization  
controls cuts  
or boosts the  
treble (12kHz)  
and bass (80Hz)  
range by 15 dB  
LINK OUTPUT  
XLR jack lets you  
connect additional  
BEHRINGER active  
loudspeaker  
Power LED  
systems  
When combined with switching-mode power  
supplies that replace heavy toroid transformers,  
our new designs provide more dynamic punch  
since the higher switching frequency reloads the  
supply’s capacitors much faster. And, because  
they are so much more efficient, the D Series runs  
cooler and doesn’t require huge, heavy heat sinks.  
The resulting speakers systems are much lighter,  
making them easy to transport and set up. Our  
no-compromise design means your D Series active  
loudspeakers will deliver full power and incredible  
fidelity all night long, with no need for rest cycles.  
Marvelous monitoring  
Low frequency response  
Thanks to their trapezoidal  
The EUROLIVE D Series was built with  
extended low frequency handling in  
mind. With a tuned port, internally braced,  
injection molded enclosure, each model’s  
custom-designed LF transducer (woofer)  
really cranks out tight low end. Keep in  
mind that bass response varies according  
to LF transducer size, so the larger the  
speaker, the more bass you will be able to  
generate.  
design, these cabinets can be laid on their  
side providing the ideal angle for onstage  
monitor wedge applications. Hookup is  
simple, requiring only a single XLR or  
¼" cable from the monitor send on your  
mixing console and, of course, power.  
Additional monitors can be chained  
together via the XLR LINK OUTPUT jack  
on the rear panel.  
Instant PA system  
With just a single D Series loudspeaker system  
and a microphone or MP3 player, you can set  
up an instant sound system. Thanks to the built-  
in preamp section, you just connect a dynamic  
mic and raise and lower the volume with  
the Level control. Plug in your sound source,  
place the speaker on a tabletop or stand, and  
power up. It’s just that easy. And if you need more  
coverage, simply use the convenient LINK OUTPUT  
XLR connector to add more active loudspeakers.  
Custom-designed transducers  
Accurate non-fatiguing midrange  
and treble  
Let’s face it; the transducers (woofers  
and tweeters) are the only part of a  
sound system you actually hear, so we  
don’t cut any corners. While some of  
our competitors are content to buy  
off-the-shelf transducers and plug them  
into their boxes, we custom-design and  
build our transducers from scratch. Not  
only do we wind our own voice coils,  
we process the paper pulp into cones  
and even machine our own backplates.  
This enables us to control the quality,  
and frankly, make better components,  
like the long-excursion LF transducers  
and state-of-the-art 1.35" compression  
drivers we deploy in each and every  
EUROLIVE enclosure.  
Even if your particular application  
doesn’t include booming bass, you’ll  
love the sheer accuracy of these  
loudspeakers. Over a year of design  
went into a exponential horn/aluminum  
dome compression driver combination  
that could do justice to loud hard rock  
or dance music — yet could also satisfy  
audiophiles with its musical timbre and  
attention to detail. For spoken word,  
singing or acoustical instruments, they are  
un-matched for being able to articulate  
complex harmonic details. In fact, many  
customers think it’s the most natural-  
sounding speaker they’ve ever heard at  
anywhere near the price.  
Stereo music system  
You can even use two D Series enclosures for  
stereo playback of your MP3, CD or old-skool  
cassette deck without any additional hardware.  
Just plug the appropriate stereo “breakoutadapter  
into your deck’s output jack and run the cables to  
the ¼" inputs on each loudspeaker. Set the Level  
and EQ controls the same on both enclosures.  
Voilà, instant party!  
Continued on next page  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Page 4 of 5  
the speakers to their maximum with  
no distortion — and without speaker  
damage, thanks to active internal  
protection circuits. Put simply, they will  
astound you with their massive punch,  
smooth mids and articulate top-end!  
Physics are physics and a 15" low  
frequency transducer has almost 40%  
more surface area with which to move  
air than a 12". A 12" has 30% more area  
than a 10", and a 10" has 35% more than  
an 8". So the easiest answer is “Whether to  
choose one speaker cabinet over another  
depends on your bass requirements.”  
EUROLIVE  
B215D/B212D  
B210D/B208D  
Which speaker do I need?  
Processor controlled output  
As you’ve probably noticed, we make  
these active loudspeakers in four different  
woofer sizes. Which one is right for you?  
Dynamic processing is one of the best ways to  
maximize output without sacrificing sound quality.  
The D Seriesbuilt-in circuitry automatically adjusts  
program content, allowing the loudspeaker to  
operate at extreme levels. It accomplishes this by  
reducing bass output slightly as you approach the  
limit of the transducers. This frees up LF amp and  
transducer resources, so that higher overall volume  
can be realized. It’s like having a tiny soundman  
inside each cabinet constantly monitoring and  
changing output parameters. By making subtle  
changes to the crossover frequency and the audio  
content, the system is able to crank out more sound  
— without the slightest hint of distortion.  
If you’re addressing a small meeting,  
or demoing the latest “slice-o-chop-o-  
vegamaticat the swap meet or county  
fair, the B208D might be all the speaker  
you’ll need. But if you’re providing disco  
to the masses at a standing room only  
nightclub — or you just need to crank  
it up louder, then the B215D may be a  
better choice.  
Well, let’s start with your application.  
Is it spoken word in a hotel ballroom?  
Hard rock in a park? A folk singer or a  
drum ‘nbass DJ? Loud enough for an  
18-year old or loud enough for your  
grandmother? A huge auditorium or  
a tiny club?  
Continued on next page  
Massive power to size ratio  
Ergonomically  
shaped carry  
State-of-the-art  
1.35" aluminum-  
diaphragm  
compression driver  
for exceptional  
high-frequency  
reproduction  
Cutting-edge technology and high-fidelity  
speakers are not all it takes to get your message  
across — you need power, and lots of it. At the  
heart of each EUROLIVE D Series loudspeaker are  
two high-current amplifiers with a total output of  
550-Watts for the B212D/B215D and 200-Watts  
for the B210D/B208D. They’re capable of driving  
handles on each  
side of enclosure  
for easy transport  
of system. Two  
handles on  
B212D/B215D,  
one on B210D  
Ultra-wide  
dispersion and  
large format horn  
Impact  
resistant,  
molded  
enclosure.  
Trapezoid shape  
allows use as  
a powered  
monitor wedge  
Extremely  
powerful  
15"/12"/10"/8"  
long-excursion  
LF transducer  
provides incredibly  
deep bass and  
acoustic power  
Rubber feet  
for stacking  
enclosure on  
structures or  
subwoofers  
138" (35-mm) pole  
socket for standard  
speaker stands  
B215D  
B212D  
B210D  
B208D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Page 5 of 5  
As you can see, “Bass requirements”  
isn’t quite as easy an answer as it sounds.  
The larger a room’s cubic volume, the  
more energy is required to achieve  
a given level of bass. In other words,  
when playing the same tune in a big room  
versus a small room, big room = less bass;  
small room = more bass. Confused yet?  
We suggest that you consult your  
BEHRINGER dealer for more advice on  
this subject, which is also a good time  
to do a listening test —against their  
competition and against each other.  
Judge for yourself. And then own  
BEHRINGER with money to spare.  
EUROLIVE  
B215D/B212D  
B210D/B208D  
OUTPUT POWER  
AUDIO INPUTS  
POWER SUPPLY  
Low-frequency range  
XLR (servo-balanced)  
Sensitivity  
Voltage (Fuses)  
-40 dBu to +4 dBu  
20 kΩ  
B208D/B210D  
RMS @ 1% THD  
Peak power  
B208D/B210D  
USA / Canada  
UK / Australia  
Europe  
Input impedance  
135 W @ 8 Ω  
160 W @ 8 Ω  
120 V, 60 Hz (T 4.0 A H 250 V)  
240 V~, 50 Hz (T 2.0 A H 250 V)  
230 V~, 50 Hz (T 2.0 A H 250 V)  
100 V~, 50-60 Hz (T 4.0 A H 250 V)  
¼" TRS jack (servo-balanced)  
Sensitivity  
-40 dBu to +4 dBu  
B212D/B215D  
RMS power  
Input impedance  
20 kΩ  
Japan  
280 W @ 8 Ω  
450 W @ 8 Ω  
Power consumption max. 300 Watts  
Peak power  
Level control  
Input Trim  
Mains connection  
Standard IEC receptacle  
–∞ to + 30 dB  
+22 dBu  
High-frequency range  
Max. input level  
B212D/B215D  
USA / Canada  
UK / Australia  
Europe  
B208D/B210D  
RMS @ 1% THD  
120 V, 60 Hz (T 6.3 A H 250 V)  
Link  
38 W @ 8 Ω  
240 V~, 50 Hz (T 3.15 A H 250 V)  
230 V~, 50 Hz (T 3.15 A H 250 V)  
100 V~, 50-60 Hz (T 6.3 A H 250 V)  
Connector  
XLR connector  
Peak power  
42 W @ 8 Ω  
LOUDSPEAKER SYSTEM DATA  
B212D/B215D  
RMS power  
Japan  
65 W @ 8 Ω  
B208D/B210D  
Power consumption max. 600 Watts  
Peak power  
100 W @ 8 Ω  
Frequency response 65 Hz to 20 kHz  
Mains connection  
DIMENSIONS/WEIGHT  
B208D  
Standard IEC receptacle  
Crossover frequency 24 kHz  
SPEAKER POWER CAPACITY  
Woofer  
Sound pressure level max. 113 dB SPL @ 1 m  
Limiter  
Optical  
Dimensions (HxWxD) 14.70 x 8.00 x 9.80"  
249 x 205 x 372 mm  
B212D  
Size  
Dynamic equalizer  
Processor-controlled  
12"  
B212D  
Weight  
14.70 lbs / 6.70 kg  
RMS @ 1% THD  
250 W @ 8 Ω  
Frequency response 65 Hz to 20 kHz  
B210D  
Peak power handling 1000 W @ 8 Ω  
Crossover frequency 2.4 kHz  
Dimensions (HxWxD) 18.30 x 11.50 x 9.60"  
464 x 292 x 244 mm  
B215D  
Sound pressure level max. 125 dB SPL @ 1 m  
Size  
15"  
Limiter  
Optical  
Weight  
18.80 lbs / 8.50 kg  
RMS @ 1% THD  
250 W @ 8 Ω  
Dynamic equalizer  
Processor-controlled  
B212D  
Peak power handling 1000 W @ 8 Ω  
B215D  
Dimensions (HxWxD) approx. 21.70 x 13.60 x 10.60"  
approx. 550 x 345 x 270 mm  
Tweeter  
Frequency response 55 Hz to 20 kHz  
Weight  
31.9 lbs / 14.5 kg  
Crossover frequency 1.9 kHz  
B212D/B215D  
RMS @ 1% THD  
Sound pressure level max. 126 dB SPL @ 1 m  
B215D  
30 W @ 8 Ω  
Limiter  
Optical  
Dimensions (HxWxD) approx. 27.2 x 17.3 x 13.2"  
approx. 690 x 440 x 335 mm  
Peak power handling 120 W @ 8 Ω  
Dynamic equalizer  
Processor-controlled  
Weight  
45.2 lbs / 20.54 kg  
EQUALIZER  
HIGH  
Please note these specifications are preliminary and conceptual in nature,  
and as such are subject to change as product development progresses.  
This information is supplied for market research purposes only and is not  
to be made public in any manner. This document is solely the property of  
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon  
request of the owner.  
12 kHz / 15 dB  
80 Hz / 15 dB  
LOW  
For service, support or more information contact the BEHRINGER location nearest you:  
Europe  
Tel.: +49 2154 9206 4149  
Fax: +49 2154 9206 4199  
Singapore  
Tel.: +65 6845 1800  
Fax: +65 6214 0275  
Tel.: +61 03 9877 7170  
Fax: +61 03 9877 7870  
Japan  
Tel.: +81 3 5281 1180  
Fax: +81 3 5281 1181  
USA/Canada Tel.: +1 425 672 0816  
Australia  
Fax: +1 425 673 7647  
©2011 Red Chip Company Ltd. Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which  
may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00401  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Acer Laptop 2400 Series User Manual
Acer Laptop TravelMate 7300 User Manual
Addonics Technologies DVD Player ZDVRRWESU User Manual
Aiwa Stereo System JAX N33 User Manual
American Standard Hot Tub 7236E Series User Manual
Asus Cell Phone P565 User Manual
ATK Motorcycles Motorcycle 450 Dirt Track User Manual
Avocent Switch ESP Multi Interface Serial User Manual
Barco Cell Phone Accessories 3 User Manual
Eureka Tents Tent Forte SQ 2 User Manual