Behringer Car Amplifier BX1800 User Manual

User Manual  
ULTRABASS BX1800  
180-Watt Bass Amplifier with Original BUGERA Speaker  
and VTC-Technology  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
ULTRABASS BX1800 User Manual  
9. Do not defeat the safety purpose of the polarized  
or grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding-type plug  
has two blades and a third grounding prong. The wide  
TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED  
UNDERTAKING OR REPRESENTATION. THIS MANUAL  
IS COPYRIGHTED. NO PART OF THIS MANUAL MAY  
BE REPRODUCED OR TRANSMITTED IN ANY FORM  
Important Safety  
Instructions  
blade or the third prong are provided for your safety. If the OR BY ANY MEANS, ELECTRONIC OR MECHANICAL,  
provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
INCLUDING PHOTOCOPYING AND RECORDING OF ANY  
KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS  
WRITTEN PERMISSION OF MUSIC GROUP IP LTD.  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience receptacles,  
and the point where they exit from the apparatus.  
Terminals marked with this symbol carry  
electrical current of sufficient magnitude  
to constitute risk of electric shock.  
ALL RIGHTS RESERVED.  
© 2013 MUSIC Group IP Ltd.  
Trident Chambers, Wickhams Cay, P.O. Box 146,  
Road Town, Tortola, British Virgin Islands  
11. Use only attachments/accessories specified by  
the manufacturer.  
Use only high-quality professional speaker cables with  
¼" TS or twist-locking plugs pre-installed. All other  
installation or modification should be performed only  
by qualified personnel.  
12. Use only with the  
cart, stand, tripod, bracket,  
or table specified by the  
LIMITED WARRANTY  
For the applicable warranty terms and conditions  
and additional information regarding MUSIC Group’s  
Limited Warranty, please see complete details online at  
manufacturer, or sold with  
the apparatus. When a cart  
is used, use caution when  
moving the cart/apparatus  
combination to avoid  
This symbol, wherever it appears,  
alerts you to the presence of uninsulated  
dangerous voltage inside the  
enclosure - voltage that may be sufficient to constitute a  
risk of shock.  
injury from tip-over.  
This symbol, wherever it appears,  
alerts you to important operating and  
maintenance instructions in the  
13. Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power supply cord or plug  
is damaged, liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been exposed  
to rain or moisture, does not operate normally, or has  
been dropped.  
accompanying literature. Please read the manual.  
Caution  
To reduce the risk of electric shock, do not  
remove the top cover (or the rear section).  
No user serviceable parts inside. Refer servicing to  
qualified personnel.  
Caution  
To reduce the risk of fire or electric shock,  
do not expose this appliance to rain and  
15. The apparatus shall be connected to a MAINS socket  
outlet with a protective earthing connection.  
16. Where the MAINS plug or an appliance coupler is  
used as the disconnect device, the disconnect device shall  
remain readily operable.  
moisture. The apparatus shall not be exposed to dripping  
or splashing liquids and no objects filled with liquids,  
such as vases, shall be placed on the apparatus.  
Caution  
These service instructions are for use  
by qualified service personnel only.  
To reduce the risk of electric shock do not perform any  
servicing other than that contained in the operation  
instructions. Repairs have to be performed by qualified  
service personnel.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
LEGAL DISCLAIMER  
TECHNICAL SPECIFICATIONS AND APPEARANCES  
ARE SUBJECT TO CHANGE WITHOUT NOTICE AND  
ACCURACY IS NOT GUARANTEED. BEHRINGER,  
KLARK TEKNIK, MIDAS, BUGERA, AND TURBOSOUND  
ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).  
ALL TRADEMARKS ARE THE PROPERTY OF THEIR  
RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO  
LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED  
BY ANY PERSON WHO RELIES EITHER WHOLLY OR  
IN PART UPON ANY DESCRIPTION, PHOTOGRAPH  
OR STATEMENT CONTAINED HEREIN. COLORS AND  
SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT.  
MUSIC GROUP PRODUCTS ARE SOLD THROUGH  
AUTHORIZED FULLFILLERS AND RESELLERS ONLY.  
FULLFILLERS AND RESELLERS ARE NOT AGENTS OF  
MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
ULTRABASS BX1800 User Manual  
1. Introduction  
1.1.2 Initial operation  
With the BX1800 you have acquired a state-of-the-art Bass Workstation that sets Be sure that there is enough space around the unit for cooling. To avoid  
new standards in bass amp engineering. Right from the start, our goal has been  
to design a revolutionary amp that stands out from the herd of “ordinary” bass  
amplifiers. And indeed, the BX1800 gives you plenty of functionality and a broad  
range of connection and expansion options. In short: you’ll be fascinated to find  
that the BX1800 is a Workstation with a character.  
overheating, please do not place the ULTRABASS near radiators and other  
equipment emanating heat.  
Please keep in mind that all the equipment has to be grounded at all  
times. For your own protection, never change or disable the grounding  
on your equipment or on the cables! The unit shall always be connected  
to the mains socket outlet with a protective earthing connection.  
VTC Virtual Tube Circuitry  
The VTC Virtual Tube Circuitry was specially developed to lend the bass sound the 1.1.3 Online registration  
unique character of classic tube amps.  
Please register your new BEHRINGER equipment right after your purchase  
warranty carefully.  
Jam it up!  
With its CD player input, your BX1800 is the ultimate practice amp,  
because it couldn’t be easier to play along to your favorite music. If you don’t  
want anybody listening to what you’re playing, or simply wish to avoid disturbing  
the neighbors, just use your headphones. The BEHRINGER HPS3000 is ideal just  
for that.  
Should your BEHRINGER product malfunction, it is our intention to have it  
repaired as quickly as possible. To arrange for warranty service, please contact  
the BEHRINGER retailer from whom the equipment was purchased. Should your  
BEHRINGER dealer not be located in your vicinity, you may directly contact  
one of our subsidiaries. Corresponding contact information is included in the  
original equipment packaging (Global Contact Information/European Contact  
Information). Should your country not be listed, please contact the distributor  
nearest you. A list of distributors can be found in the support area of our website  
(http://behringer.com).  
Please read the manual carefully and keep it around for  
future reference.  
Attention!  
High volume levels can damage your hearing or your headphones.  
Registering your purchase and equipment with us helps us process your repair  
claims more quickly and efficiently.  
Please turn down the VOLUME control to zero (all the way to the left)  
before you power up the amp. Always make sure you use appropriate  
volume levels.  
Thank you for your cooperation!  
1.1 Before you get started  
1.1.1 Shipment  
Your BX1800 was carefully packed at the factory, and the packaging was  
designed to protect the unit from rough handling. Nevertheless, we recommend  
that you carefully examine the packaging and its contents for any signs of  
physical damage that may have occurred during transit.  
If the unit is damaged, please do NOT return it to BEHRINGER.  
Instead, notify your dealer and the shipping company immediately.  
Otherwise, claims for damage or replacement may not be honored.  
Always use the original packing carton to prevent damage during  
storage or transport.  
Make sure that no children are left unsupervised with the BX1800 or  
its packaging.  
Please ensure proper disposal of all packing materials.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
ULTRABASS BX1800 User Manual  
2. Wiring Tips  
Figures 2.1 and 2.2 show you how to connect your bass to the amplifier.  
Fig. 2.2 shows a recommended setup for amplifying the sound of your BX1800  
using a sound reinforcement system of any size. This way, you can also use your  
amp for playing live or for rehearsals with your band.  
If you want to use an effects unit (for example, the BEHRINGER X V-AMP PRO)  
to experiment with some out-of-the-ordinary sounds, you can connect your bass  
directly to the input of the unit. Then, connect a second cable from the effects  
output to the input on your bass amp.  
BEHRINGER  
EUROPOWER  
EP1500  
If you have an electronic tuner, please be sure to insert it pre effects device,  
so that the tuner only receives a dry signal without effects components.  
X V-AMP PRO: no additional tuner required.  
BEHRINGER  
Main  
EUROLIVE B1520 PRO  
Outputs  
The built-in loudspeaker is disabled automatically when you plug in  
the headphones.  
BEHRINGER  
EURORACK  
UB1222FX-PRO  
Outputs  
ADJUST  
1
2
3
4
GAIN  
/
VOLUME  
Output  
N
D
COPY  
2
F
U
N
C
T
I
O
N
CONFIGURE  
PEDAL  
BASS EQ  
PRESENCE  
BEHRINGER  
BASS V-AMP  
Input  
BYPASS/TUNER  
CD Player  
BEHRINGER X V-AMP  
Input  
BEHRINGER  
HPS3000  
XLR D.I.  
Out  
Instrument In  
CD player  
input  
Instrument  
input  
Headphone  
BEHRINGER  
ULTRABASS BX1800  
E-Bass  
Fig. 2.2: Live setup  
BEHRINGER  
ULTRABASS BX1800  
E-Bass  
Fig. 2.1: Example of a setup using the ULTRABASS BX1800  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
ULTRABASS BX1800 User Manual  
3. Control Elements  
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15)  
(16)  
Fig. 3.1: Front view  
(1) Connect your bass to the INPUT jack, using a standard cable with a  
1" TS connector.  
(15) Use the balanced D.I. OUT XLR output to feed the audio signal from your  
ULTRABASS to an external mixing console. The D.I. OUT signal is post-EQ.  
(2) Press the PAD switch when using active instruments with high output levels. (16) Use the POWER switch to switch the BX1800 on or off. You should always  
In this case the INPUT jack features 6 dB less gain. For passive instruments  
the PAD button has to be depressed.  
make sure that the POWER switch is in the “Off” position when initially  
connecting the unit to the mains.  
(3) Pressing the SHAPE button will activate the Shape function. The Shape  
function on your BX1800 provides a revolutionary type of filter that you can  
use to modify your bass sound.  
To disconnect the unit from the mains, pull out the main cord plug.  
When installing the product, ensure that the plug is easily accessible.  
Please note: Merely switching the unit off does not mean that it  
is fully disconnected from the mains. When not using the unit for  
prolonged periods of time, please unplug the unit’s power cord from  
the power outlet.  
(4) Use the VOLUME control to adjust the volume of the instrument channel.  
To change the balance between the instrument and CD volume level,  
use your instrument’s volume control.  
(5) The LOW control allows you to boost or cut the low-frequency range.  
(6) Using the LOW MID control you can boost or cut the lower mids.  
(7) The HIGH MID control allows you to boost or cut the upper mids.  
(19)  
(18)  
(8) The HIGH control governs the high-frequency range to give your bass a more  
“cutting” sound.  
(9) Use the CD IN connectors to connect the output of your CD player, tape deck,  
CD or MD walkman. This way you can play along to music or bass guitar  
tutorial CDs.  
(10) The BX1800 features an FX INSERT-Loop for external effects. Connect the  
SEND output to the input of your effects device, for example, our proven  
multi-effects processor BEHRINGER VIRTUALIZER PRO DSP2024P. This output  
can also be used to connect your tuner.  
(17)  
(11) Connect the RETURN jack to the output of your effects device. Since the  
BX1800 features a serial effects path, the mix ratio must be set on your  
effects device.  
Fig. 3.2 Rear view  
(17) MAINS CONNECTION. Use the power cord supplied with the unit to connect  
it to the mains.  
(12) The PHONES jack is for headphones. When you plug in your headphones,  
the built-in loudspeaker is muted.  
(18) FUSE HOLDER/VOLTAGE SELECTOR. Before connecting the unit to the  
mains, make sure that the voltage setting matches your local voltage.  
A blown fuse should only be replaced by a fuse of the same type and rating.  
On some units, the fuse holder can be switched to one of two positions,  
i.e. 230 V and 120 V. When operating the unit outside Europe at 120 V,  
a higher fuse rating is required.  
The headphone signal can also be routed to a mixing console or  
sound reinforcement system. Connect the headphones output on  
your BX1800 to the line input (LINE IN) on the console (for example,  
BEHRINGER EURORACK UB1222FX-PRO). Please use a mono cable for  
this application.  
(19) SERIAL NUMBER.  
Some headphones produce distortion if the volume level is too high.  
Please cut back the VOLUME control until the distortion disappears.  
(13) Use the MASTER control to adjust the output level of the D.I. OUT output.  
(14) The GND LIFT switch disconnects (switch pressed) the ground connection  
at the D.I. OUT output to effectively eliminate hum noise resulting from  
ground loops.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
ULTRABASS BX1800 User Manual  
4. Audio Connections  
5. Specifications  
Except for the D.I. OUT output which is on a balanced XLR connector, your  
BEHRINGER ULTRABASS BX1800 features 1" connectors on inputs and output.  
More detailed information can be found in chapter 5, “Specifications.”  
Audio Inputs  
Active instrument input  
Input impedance  
Passive instrument input  
Input impedance  
Return  
1" mono jack, unbalanced  
approx. 220 kΩ unbalanced  
1" mono jack, unbalanced  
approx. 730 kΩ unbalanced  
1" mono jack, unbalanced  
approx. 15 kΩ unbalanced  
RCA, unbalanced  
Please keep in mind that all the equipment has to be grounded at all  
times. For your own protection, never change or disable the grounding  
on your equipment or on the cables! The unit shall always be connected  
to the mains socket outlet with a protective earthing connection.  
Input impedance  
CD input  
Audio Outputs  
Send  
1" mono jack, unbalanced  
min. 2 kΩ unbalanced  
XLR connector, servo-balanced  
approx. 100 Ω balanced  
max. 0 dBu  
Output impedance  
D.I. Out  
Output impedance  
Output level  
Fig. 4.1: 1" mono connector (TS) for the INPUT  
System Data  
Power amp output  
180 Watts  
Loudspeaker  
High-power bass speaker  
Tweeter  
15" BUGERA Classic Tone Series  
custom-made horn tweeter  
Power Supply  
Mains Voltages  
U.S./Canada  
120 V~, 60 Hz  
Europe/U.K./Australia  
China  
230 V~, 50 Hz  
Fig. 4.2: 1" stereo connector (TRS) for headphones  
220 V~, 50 Hz  
Japan  
100 V~, 50 - 60 Hz  
120/230 V~, 50 - 60 Hz  
max. 290 W  
General export model  
Power consumption  
Fuse  
100 - 120 V~: T 6.3 A H 250 V  
200 - 240 V~: T 3.15 A H 250 V  
Mains connection  
Standard IEC receptacle  
Dimensions/Weight  
Fig. 4.3: XLR connectors  
Dimensions (H x W x D)  
approx. 570 x 310 x 500 mm  
(22.4 x 12.2 x 19.7")  
Weight  
approx. 24.6 kg (54.12 lbs)  
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,  
modifications may be made from time to time to existing products without prior notice. Specifications and  
appearance may differ from those listed or shown.  
Fig. 4.4: RCA cable  
Download from Www.Somanuals.com. All Manuals Search And Download.  
We Hear You  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Accusplit Watch A725MXDMT User Manual
Acesonic Music Mixer AM 145 User Manual
Actiontec electronic Network Router 0530 0276 000 User Manual
AKG Acoustics Headphones K 518 DJ User Manual
Amcor Air Conditioner PVMB 12000E User Manual
Atlona Telephone AT USB50 SR User Manual
Avet Reels Fishing Equipment MXL 58 User Manual
Axis Communications Security Camera P5414E User Manual
Beko Oven OIF 22100 User Manual
Beko Refrigerator CHA 27020 X User Manual