Congratulations on purchasing
this product
PFWX-51B
PFWU-51B
Quick Setup Guide
Packaging Contents
1
(EU/US/CH)
user
manual
AAA (2x)
2
Side Cover Removal
Loosen the captive screws
on each of the two side panels.
Direction to release
the side covers from the unit.
3
Lens Assembly
Please consult the
full User Manual
for detailed info on
Lens Assembly or
Lens Replacement.
This should only be
done by a qualified
Service Technician,
preferrably prior to
ceiling mounting.
4
Rear Cover
Flip open the rear lid
to gain access to the inputs panel.
5
Ceiling Mount*
220
110
M4x8 MAX.
(4x)
Unit Weight: 12,6 kg
Please check the manual of your
supportsystem for compatability
130
260
*(Ceiling mount system is not included)
6
Input Cables
(See User Manual for detailed info on Inputs and PiP)
7
Remote Control
Quick Keys
(for Remote and keypad)
Feedback LED
Menu - UP
Menu - RIGHT
Menu - DOWN
Menu - OK
Quick Key 1
Push Menu-UP twice
for instant ‘Picture Mute’
Menu - LEFT
Quick Key 2
Home/Menu
Push Menu-OK for
quick access to the
Focus/Zoom Menu
Power
On/StandBy
Battery Lid
(Slide down
to open)
8
Starting Projector
IR Position
IR Position
Rear
Front
1 sec
1 sec
1 sec
1 sec
1 sec
OFF/STBY
ON
Error
During Start-up
Status Led
9
OSD Lite Menu
INPUT
BRIGHTNESS
CONTRAST
COLOR
Toggle between input sources
adjust lamp brightness level
adjust image contrast
adjust image colour
INPUT
BRIGHTNESS
CONTRAST
COLOR
ASPECT RATIO
LENS FOCUS
LENS ZOOM
modify image aspect ratio
adjust lens focus
ASPECT RATIO LENS FOCUS
LENS ZOOM
LENS SHIFT
adjust lens zoom
LENS SHIFT
KEYSTONE
LANGUAGE
INFO
MODE
SERVICE
adjust lens shift
adjust keystone
i
M
MODE
KEYSTONE
LANGUAGE
ADVANCED
INFO
select language
information on lamp status
normal/eco/power
service information
see user manual
i
SERVICE
ADVANCED
10
Important Info
- Remove the lens before transporting the projector.
- To save lamp lifetime, first switch the projector to standby mode
and wait two minutes, then switch off the main power.
- Ensure that the projector is operating with clean filters.
- Do not block the ventilation in -and outlets.
- Using the projector at a non recommended tilt angle will reduce the lifetime of the lamps
or create unexpected behaviour of the unit.
- Laser light can cause severe damage to the DMD. This damage is not covered by warranty.
For more information and Maintenance Guidelines,
check the Detailed User Manual on:
Download from Www.Somanuals.com. All Manuals Search And Download.
|