BB Electronics Switch EIR618 User Manual

EIR618 Series-5107qsg  
Quick Start Guide  
3
4
LED Chart  
Hardware Installation  
Elinx Managed Ethernet Switch  
EIR618 Series  
o
Record the switch’s MAC Address in the space  
provided. The MAC Address is printed on the product  
label. NOTE: Provide the MAC Address to your  
Network Administrator. The Network Administrator  
should provide an IP Address, Subnet Mask, and  
Gateway.  
Select a mounting location and install with the attached  
DIN rail clip or included panel mount kit.  
Connect power to the switch  
LED  
Status  
Green  
Off  
Green  
Off  
Green  
Off  
Red  
Meaning  
The Switch is powered on  
The Switch is powered off  
Power Source 1 is available  
Power Source 1 is unavailable  
Power Source 2 is available  
Power source 2 is unavailable  
Power or Port failure  
Normal Operation  
The Switch is the master of a redundant  
ring (X-Ring)  
The Switch is not the master of a  
redundant ring.  
SFP Port is linked  
Data is being transmitted or received  
Not connected to the network  
Port is linked  
Data is being transmitted or received  
Not connected to the network  
Operating at 1000M  
PWR  
PWR1  
PWR2  
Fault  
o
o
Off  
o
o
12 to 48 VDC  
Redundant inputs are available with fault  
contacts.  
Green  
Off  
R.M  
NOTE: The installation of an SFP Module disables  
the associated RJ-45 Port.  
Green  
Blinking  
Off  
Green  
Blinking  
Off  
Green  
Off  
Green  
Blinking  
Off  
LINK/ACT  
Port 17/18*  
SFP  
T
T
T
B
B
T
T
T
B
B
B
1
Log into the Switch  
Items Included  
Port  
17/18*  
RJ-45  
5
Disconnected or below 1000M  
Connected to the network  
Data is being transmitted or received  
Not connected to the network  
Operating in full-duplex  
o
o
These instructions are for Web based management.  
Refer to the Users Manual for instructions concerning  
console management.  
Connect a switch port to a stand alone PC. Change the  
PCs network IP Address to allow it to connect to the  
switch (ex: 192.168.16.2). Use the default subnet mask  
and gateway.  
o
Ethernet Switch  
o
o
o
o
Console Cable (RS-232 RJ-45 to DB-9)  
CD with Support Manual  
This Quick Start Guide  
Panel Mount Bracket  
P1-16*  
Yellow  
Blinking  
Off  
Data collision  
Half-duplex or not connected  
o
o
Launch the PCs web browser and navigate to the  
switch by typing the switchs IP Address in the browser  
address window.  
Navigate the web page by expanding the folders on the  
left side of the web page.  
Ports 1 through 16 are 10/100 RJ-45, Ports 16 & 17 are  
100/1000 RJ-45 or SFP.  
*Note  
Default Settings  
2
o
o
o
o
IP Address: 192.168.16.1  
Subnet Mask: 255.255.255.0  
Gateway: 192.168.16.254  
User Name: root, Password: root  
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA  
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland  
+353 91 792444 Fax +353 91 792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Switch 3CNJ100 User Manual
Aastra Telecom Telephone 4223 User Manual
Accusplit Fitness Electronics AE1720WPR User Manual
Acer Computer Monitor G195HQ User Manual
Agri Fab Cultivator 45 0356 User Manual
Amana Range AGG222VDW User Manual
Audiovox Automobile Alarm PRO 9649 User Manual
Audiovox Remote Starter APS 597 User Manual
Bacharach Fitness Electronics 19 7037 User Manual
BC Speakers Portable Speaker 8 PL 21 User Manual