AVS DVD Copy Program Help
Online Media Technologies Ltd. © Copyright 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Introduction
System Requirements
Windows 2000/XP/2003/Vista operating system (all of the last updates installed are
recommended);
Pentium III 800 MHz or higher;
128 MB RAM;
CD-RW, DVD-ROM/CD-RW combo drive, DVD-R/RW/DL, DVD+R/RW/DL, DVD-RAM, BD-R/RE
drive with 1394, USB2.0, ATAPI, SCSI, or CardBus interface;
At least 10 megabytes of free hard disk space; up to 200 Gb to create an ISO-image of a six-
layer Blu-Ray disc;
Enabling the DMA mode is recommended for proper use;
Administrative privileges are required for installation.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Introduction
Contact Us
If you have any comments, suggestions or questions regarding AVS DVD Copy or if you have a new
feature that you think could be added to improve our product, please feel free to contact us.
General information
Technical support
Sales
If you do not receive an answer to your question within 24 hours, please feel free to submit your
question via support form . Unfortunately some messages may be rejected by our mail server as
spam or as ones that contain viruses.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Introduction
Technical Support
AVS DVD Copy software does not require any professional knowledge. If you experience any problem
or have a question, please refer to the program help. If you cannot find the solution, please contact
our support staff.
AVS Media staff provides several forms of automated customer support:
Web Site Support
information on AVS DVD Copy . Check our updates of Frequently Asked Questions and
How To section.
E-mail Support
You
can
submit
your
technical
questions
and
problems
via
e-mail
to
[email protected] . Please note that for more effective and quick resolving of the
difficulties we will need the following information.
System parameters (CPU, hard drive space available, etc.)
Operating System
The information about the DVD drives installed on your computer (manufacturer and
model)
Detailed step by step description of your action
Please do NOT attach any other files to your e-mail message unless specifically requested by
AVS Media support staff.
If you do not receive an answer to your question within 24 hours, please feel free to submit
your question via support form . Unfortunately some messages may be rejected by our mail
server as spam or as ones, which contain viruses.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Program Interface
Main Window
AVS DVD Copy has a simple intuitive interface that is easy to understand and very easy to use. When
you launch the application you will see the Main Window where the basic controls of the program are
placed.
AVS DVD Copy Main Window consists of the following principal parts:
Top Toolbar - the toolbar with the main action buttons that let the user select the work mode
of the AVS DVD Copy program.
Main Area - the central part of the AVS DVD Copy program window that lets the user select
the main burning parameters or add files. Note, that the Main Area looks different depending
on the work mode of the program.
Disc size meter - the panel that shows the size of the most common disc media types and
the size of the data that is going to be written onto the disc. It is available in the Burn DVD ,
Burn DATA and Burn ISO work modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Program Interface
Top Toolbar
The Top Toolbar consists of the action buttons that can be used to select the work mode of the AVS
DVD Copy program. You should use the appropriate buttons depending on the task you are going to
perform:
Button
Description
Use this button to copy your input DVD video onto a disc or your computer hard
disk drive folder with the size selected in the box in the lower part of the main
area. The DVD video will be remastered if needed to fit the selected disc size. You
can also cut out all the unnecessary languages, menus and extras present on the
DVD.
Use this button to get an exact copy of the input CD or DVD onto the other disc.
No compression will be used to record the files onto the target disc, so you should
bear in mind that it is necessary to use the same disc type and capacity for the
recording to be performed correctly.
Use this button to burn your DVD video files onto a disc so that it become
readable on your home hardware or software DVD player. You can also create an
ISO image of the DVD video disc, so that you could burn it later onto a disc if you
do not have such a possibility right now.
Use this button to burn any kind of data onto a CD/DVD/BD disc. You can also
create an ISO image of the disc you would like to record, so that you could burn
it later onto a disc if you do not have such a possibility right now.
Use this button to burn a previously created ISO image onto a CD/DVD/BD disc.
Use this button to open this program help.
Use this button to visit the AVS Media web site on the Internet.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Program Interface
Main Area
The Main Area is the central part of the AVS DVD Copy program window that lets the user select the
main burning parameters or add files. It looks different depending on the program work mode. For
instance, for the Copy DVD work mode it will look the following way:
Here one can select the Source and Target drive or HDD folder, Copy mode for the DVD, check or
uncheck the Languages that will be included into the output DVD, set the folder for the temporary
files and the target DVD size. See the Copy DVD section for more on all these parameters.
If you select Burn DVD , Burn DATA or Burn ISO work mode, the Main Area will look the following
way:
Here you can select the target disc drive or ISO-image to record your data to (please, note, that using
ISO-image as target is disabled in Burn ISO work mode) and the files to record to your compilation.
You can use the buttons below to add files, ISO-images or folders, erase the inserted disc, set the
Download from Www.Somanuals.com. All Manuals Search And Download.
burning parameters and start disc burning or ISO-image creation . Please see the respective
chapters for more details on these actions.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Program Interface
Disc Size Meter
Disc Size Meter is available in the Burn DVD , Burn DATA and Burn ISO work modes. It shows the
size of the current disc inserted into the CD/DVD/BD drive and the size of the data that is going to be
written onto the disc. Thus, depending on the disc type and its capacity the Disc Size Meter will look
differently for a CD , DVD Single Layer or DVD Double Layer and Blu-Ray discs of different
capacities.
For instance, for a Double Layer Blu-Ray disc it will look like this:
For a DVD Single Layer it will look like this:
For a CD the Disc Size Meter appearance will change like this:
The Marker shows the standard capacity of a CD-R or a CD-RW - about 700 Megabytes.
When you add data to your compilation the Disc Size Meter will show whether your added data is
going to fit your CD/DVD/BD or if it exceeds its capacity.
If the data size is greater than the capacity of a CD/DVD/BD you should either split your data into
parts and record these parts onto several CDs/DVDs/BDs or select another disc type with a larger
capacity. See the Appendix section for more information on different disc types.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Program Interface
Express Menu
The Express Menu is used to facilitate access to the main features of the AVS DVD Copy . It can be
activated clicking the right mouse button within the Main Area of the program in the Burn DVD , Burn
DATA and Burn ISO work modes:
Item
Description
Level
Up
Use this option to go to a level that is parent to the current one.
Add...
(DVD,
ISO)
Use this option to add more files, DVD video or ISO-image to your compilation.
New
Folder
Use this option to create a new folder in your compilation list.
Delete
Use this option to remove the selected files or folders from the compilation list.
Use this option to remove all the files and folders and clear the compilation list.
Delete
All
Rename Use this option to change the names of files and folders in your compilation list.
Settings Use this option to open the Settings window and change the burning parameters.
Erase
Use this option to erase the disc in the optical disc drive.
Use this option to start burning the created compilation.
Start
burning!
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Working with AVS DVD Copy
Overview
The main work modes of the AVS DVD Copy are:
1. Copy DVD - use this mode to copy video DVD from one disc to another. The source disc will
be analyzed and, if you would like to copy from a greater size disc to a smaller size one,
recompressed to fit the target size. You can also remove unwanted languages, menus and
extras, if needed.
2. Copy CD - use this mode to create exact copies of DVDs, CDs and BDs. No data will be
changed, so you will need to use the identical disc types for both source and target.
3. Burn Discs - use these modes to record different type of files onto CDs, DVDs and BDs. You
can record DVD video (Burn DVD ), all kind of data (Burn DATA ) and ISO-images (Burn
ISO ) onto your target disc.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Copy DVD
Overview
Copy DVD work mode is used to copy video DVDs and recompress the DVD video recorded on double-
layer media to fit single-layer discs.
The work with the Copy DVD mode is quite easy. It can be done in several steps:
1. Select the Source and the Target DVD drive (or hard disk drive folder, if you have your DVD
video on your computer HDD). You might also need to select the folder for the temporary files.
If you copy a DVD having only one disc drive, a temporary image on your computer HDD will
be created to let you record the resulting disc using the same disc drive. In this case please
make sure that you have enough free hard drive disk space available for the created
temporary disc image. Its size could be up to almost 9 gigabytes for a double-layer DVD. You
should also set the target disc size in the appropriate box.
2. Select the Copy mode . You can either copy the entire DVD with all the menus and extras, or
copy the DVD retaining its structure and menus but removing all the extras, or copy only the
main movie.
3. Select the necessary Languages and audio streams and remove the unwanted or unneeded
ones. This can enhance the quality of the output video.
4. When all the settings are selected, press the Start copying! button to begin the DVD copying
process. Its progress will be shown on the progress bar:
Note
:
in case the source and destination disc drives coincide, the process will be stopped
after the Shrinking source DVD phase, and the program will wait for you to insert
the DVD±R(W) disc so that the copying could be continued.
if you save the output DVD video onto your computer hard disk drive, the copying
process will consist of Opening source DVD and Shrinking source DVD phases
only.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Copy DVD
Source and Target
To start burning the discs you will need to select source and target drives.
Source (input) drive - the optical disc drive or a hard disk drive folder used to read the
information from. It can be either DVD video disc or hard drive folder containing DVD video
files. It can be selected from the drop-down list:
In this list you can see:
Drives - the list of all the optical disc drives that are present on your personal computer
(including virtual drives);
HDD folders - the list of three most recently opened hard disk drive folders, containing
DVD video files;
Open DVD from folder - select this option to open the standard explorer window and
choose the folder on your computer hard disk that contains DVD video files.
Target (output, destination) drive - the optical disc drive or a hard disk drive folder used
to record the information to. It can be either a recordable (rewritable) optical disc or hard
drive folder. As well as the source it can be selected from the drop-down list:
In this list you can see:
Drives - the list of all the optical disc drives that are present on your personal computer
(including virtual drives);
HDD folders - the list of three hard disk drive folders most recently used to save your
files to;
Copy DVD to folder - select this option to open the standard explorer window and
Download from Www.Somanuals.com. All Manuals Search And Download.
choose the folder on your computer hard disk to save the files to.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Copy DVD
Copy Modes
There are three main modes used to copy a video DVD onto the other one:
Copy the entire DVD
Copy DVD without extras
Copy only main movie
Button
Description
Use this button to copy the source DVD with all its structure - main movie,
menus and extras - onto the other DVD. If the size of the source DVD is
bigger than that of the target DVD, the video will be recompressed retaining
the structure of the original DVD.
ENTIRE DVD
with menus and
extras
Use this button to copy the source DVD and its structure onto the other DVD.
Although the structure will be retained, the extras will be removed and will
become unavailable from the DVD menu. At the same time this can enhance
the main movie quality in case the recompression is needed as sometimes
extras occupy quite a considerable part of the video DVD.
WITHOUT
EXTRAS
extras will be
removed
Use this button to copy only the main DVD movie onto the target DVD. The
DVD will be remastered and all the menus and extras will be removed in order
ONLY MOVIE
copy only the to prevent the movie from being too much compressed. It is very helpful if
movie
you prefer to have the main movie in a better quality and would like to get rid
of the extras or if the extras contain commercials and trailers mainly.
The selected mode will be marked with the
sign.
Depending on your needs and the input and the output disc size you can select the mode that will suit
better. For instance, if you would like to save a DVD-9 onto one DVD-5 disc, you will need to
recompress it so that it could fit the lesser capacity disc. If you do not need all the menus and extra
materials from the input disc, you can use the ONLY MOVIE mode to record the main movie only and
delete all the other materials to keep the quality better.
If you want to retain the disc structure (it can be helpful if the disc contains the deleted scenes from
the original movie or the director's cut that can only be selected from the DVD menu), you will need to
select the second mode - WITHOUT EXTRAS .
And finally, if all of the disc contents are important to you, you should select the ENTIRE DVD mode
to preserve the original DVD structure and contents.
Note : you can remove the unnecessary Languages in all the modes, thus enhancing the quality of
the output video.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Copy DVD
Language Selection
It often happens so that the source DVD contains more than one language. It is very useful when you
can speak these languages or learn them. But if you do not need them, they can be easily removed.
Moreover, if you compress the source DVD to fit the target disc, removing the unneeded languages can
help avoid stronger compression of the video, thus enhancing the quality of the output video.
When the disc or a hard disk drive folder is opened, all the available
languages for this DVD video can be found in the Languages window. You
can either check all of them or uncheck the languages you consider
unnecessary.
Note : there can be not only other languages but also audio variants of one
language that differ in the number of channels and audio codec used to
record them. It is usually done so that the DVD could be better played on
different hardware or software players. If you are sure, what track is best
played by your DVD player, you can leave only this track on the target DVD
and uncheck all the other audio tracks.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Copy DVD
Setting DVD Drive Region Code
Region code - the software protection used on DVD discs to prevent unauthorized playback and
duplication of the discs made in one country to be played in another country.
Motion picture studios want to control the home release of movies in different countries because
theater releases aren't simultaneous. They have required that the DVD standard include codes that
can be used to prevent playback of certain discs in certain geographical regions. Each player is given a
code for the region in which it's sold. The player will refuse to play discs that are not allowed in that
region.
Most DVD-ROM drives let you change the region code a few times, usually between 0 and 5. Once a
drive has reached the limit it can't be changed again unless the vendor or manufacturer resets the
drive. This limitation cannot be overridden.
There are 6 main regions: (1) Canada, U.S., US Territories; (2) Europe, Japan, South Africa, Middle
East (including Egypt); (3) Southeast Asia, East Asia (including Hong Kong); (4) Australia, New
Zealand, Pacific Islands, Central America, Mexico, South America, Caribbean; (5) Former Soviet Union,
Indian Subcontinent, Africa (also North Korea, Mongolia) and (6) China.
Before you can start copying your DVD, you will need to set up your DVD drive region code so that it
would coincide with the disc region code. In case they differ the following window will appear that will
let you set the drive region:
If you have several DVD drives on your computer, you might try and insert the disc into the other
drive that could have the region code matching the region code of the disc. If you still need to change
the code of your drive, you should bear in mind, that this will decrease the number of the drive region
changes left. When you change the drive region a certain number of times, you will not be able to
Download from Www.Somanuals.com. All Manuals Search And Download.
change it again using any software means, even reinstalling Windows or taking the drive to another
computer.
To set the new drive code press Yes , to leave it unchanged select No . Please note, that you will not
be able to copy the DVD if you choose to leave the drive region unchanged.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Copy DVD
Copying DVD-9
It happens quite often that you need to backup your double-layer DVD (so called DVD-9 ) onto one
single layer DVD (known as DVD-5 ). As a matter of fact, you will need to recompress it so that it
could fit the lesser capacity disc. The quality of the video could deteriorate in this case, so you will
need to decide what you need more - the best available quality or all the materials on the disc. There
is one more way out: you can take a double-layer DVD to record the video onto it, and the program
will suggest such an option:
You will see the disc full size in the upper part of the window and will have two options:
Use a standard DVD - use this option to reconvert the input DVD and shrink it so that it will
fit the output DVD-5 . It is recommended to use this option if your DVD-drive does not
support writing onto double-layer DVDs or if you do not have a double-layer DVD available.
See below to find out how you can improve the output video quality if you record onto a
standard DVD.
Use a double-layer DVD - use this option if you have a possibility to record the input DVD
onto a double-layer output DVD. The disc will be simply copied without any recompression and
thus any quality loss.
Some tips when copying DVD-9 onto a single DVD-5 :
If you do not need all the menus and extras from the input disc, you can use the ONLY
MOVIE mode to record the main movie only and delete all the other materials to keep the
quality better.
If you want to retain the disc structure (it can be helpful if the disc contains the deleted scenes
from the original movie or the director's cut that can only be selected from the DVD menu),
you will need to select the second mode - WITHOUT EXTRAS .
And finally, if all of the disc contents are important to you, you should select the ENTIRE DVD
mode to preserve the original DVD structure and contents.
Note : you can remove the unnecessary Languages in all the modes, thus enhancing the quality of
the output video.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Copy CD
Overview
Copy CD work mode is used to create an exact copy of the source disc. No data will be changed and
no video will be compressed on the target disc as compared to the source disc.
Select the source drive that you are going to copy from. Please note that in the source drive drop-
down combo box a path to any previously created image located at your hard drive could be specified.
After that you should set the destination drive, which also could be a CD/DVD/BD-drive as well as an
image at your hard drive. In case your destination drive is HDD, AVS DVD Copy will let you select the
destination folder using the common windows explorer.
If you clone a CD/DVD/BD having only one disc drive, a temporary image on your computer HDD will
be created to let you record the resulting disc using the same disc drive. In this case please make sure
that you have enough free hard drive disk space available for the created temporary disc image. Its
size could be up to almost 200 gigabytes for a six-layer BD.
The option Ignore reading CD sectors errors lets you copy damaged discs. In case you know that
your disc is physically damaged (scratched, for instance) the program will still let you copy such a disc,
replacing the defective areas with zero bytes. Thus the disc will become readable again, though some
of the information might be lost.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Copy CD
Copying Discs
After you select all the settings click the Start copying! button to start the copying process. You will
see the progress of the current operation and the buffer state at the moment:
You can click the Cancel button to abort the recording, although it is not recommended to do that
during the burning to the destination disc as the disc might become unreadable afterwards if the
burning process is not complete. You won't be able to read or write a CD-R, a DVD-R or a BD-R after
you press this button in the middle of the burning process.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Burn Discs
Overview
The Burn Discs work modes include three types of work depending on what type of data you are
going to burn:
1. Burn DVD - use this mode to record DVD video discs if you have video files that compose the
DVD structure (files with .vob , .ifo and .bup extensions) on your computer hard disk drive.
As a result of adding these files a DVD video disc will be recorded that will be compatible with
your software or hardware DVD player. (Please read your hardware DVD player manual to
make sure it supports DVD±R/RW discs so that it could read them after burning.)
2. Burn DATA - use this mode to record different type of data to CD, DVD or BD discs.
3. Burn ISO - use this mode to record onto a CD, a DVD or a BD ISO-images you already have
on your computer hard disk drive. The program will add the files that the ISO-image contains
to your compilation. See the Working with Images section for more detail.
Using all the Burn Discs modes is similar to each other and comprise the following steps:
Select the Burn Discs mode - Burn DVD , Burn DATA or Burn ISO - depending on the data
type that you are going to burn.
Select the target drive - optical disc or computer hard drive (when recording ISO-image).
Add the files to your compilation - DVD video files when in the Burn DVD mode, ISO-image
when in the Burn ISO mode and any data type when Burn DATA mode. Use the Add button
for that.
Adjust the burning settings for your compilation clicking the Settings button.
Erase the disc if it is not empty using the Erase button. Note, that this step can be skipped
as the program will offer you to erase the non-empty disc before the burning starts.
Click the Start burning! button to begin the recording or image creation process.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Burn Discs
Adding Files
Before you start burning your discs you should compile a list of all the files you would like to record
onto your disc.
To do that use the Add button or the Express Menu , clicking with the right mouse button within the
File list area and selecting Add... The window will open that will let you navigate through your
personal computer drives and find the necessary files and folders:
Button
Description
Use this button to move up one level from the current one on
your computer hard disk drive.
Use this button to move directly to My Computer folder of
your computer hard disk drive to add files from there.
Use this button to move directly to My Documents folder of
your computer hard disk drive to add files from there.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use this button to move directly to My Videos folder of your
computer hard disk drive to add files from there.
Use this button to move directly to My Music folder of your
computer hard disk drive to add files from there.
Use this button to move directly to view your network to add
files from a network drive.
You can also drag the files and folders from the standard windows explorer and drop them to the File
list area.
If you would like to add a new folder to your compilation you can use the Express Menu , clicking
with the right mouse button within the File list area and select New Folder . To remove files and
folders, select them and press the Delete button on the keyboard or again, use the Express Menu .
If you already have some data on the CD/DVD/BD and it was recorded using multisession mode you
can add some more data. When you insert such a disc the files already present on it will be displayed
in the Files list and marked in blue. The newly added files will be displayed in black font color:
Note : if there are some files already recorded on the disc they will not be removed from the list when
you select Delete All in the Express Menu .
See also the Working with Images section for more detail on how to create and record ISO-images.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Burn Discs
Adjusting Settings
Before you start burning, you might want to view and if needed change the additional settings. To do
that you will need to click the Settings button when you are in the Burn DVD , Burn DATA or Burn
ISO work mode. The following window will be opened:
Here you can change the following parameters:
Disc label
Speed
The name of the disc. You can select any you like best.
Possible recording speeds for this drive and disc.
Mark this check-box to verify the burned data after the recording process is
over to make sure the disc was recorded without any errors.
Verify disc
Close the disc after the data is written. You will not be able to add any data
to the disc if this check-box is ticked. If you want to record a multisession
disc you should leave this check-box unchecked.
Finalize disc
Universal Disk Format - the modern file system supporting larger files, larger
filenames (up to 256 characters in length), larger discs and more information
about individual files and folders. It includes support for special file properties
and other OS-specific data.
UDF
The extended ISO file system that allows the user use an additional set of
filenames (up to 64 characters in length) with Unicode multilanguage
support.
Joliet
The same settings are available for ISO-image burning.
In case you are going to record DVD-video, the Finalize disc setting will be enabled and no change of
this setting will be possible. That is done to ensure compatibility with the hardware DVD players. The
Joliet structure also cannot be used as DVD-video discs use only UDF file structure:
Download from Www.Somanuals.com. All Manuals Search And Download.
After you select all the parameters you can close the window clicking the appropriate button. The
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Burn Discs
Erasing Discs
If you use a rewritable disc (CD-RW, DVD-RW or BD-RE), you might need to erase it prior to recording
your compilation. To do that you should press the Erase button when you are in the Burn DVD ,
Burn DATA or Burn ISO work modes. The erase dialog window will appear to let you delete all the
information from the rewritable disc:
Here you should select:
Drive - the name of the drive that you use to record your discs.
Erase type - Quick erase or Full format of the rewritable disc.
If you select the Quick erase , the data on the disc will not be actually erased as in this
mode only the Table of Contents of the disc is deleted, the disc will appear empty and
ready for burning but the data can be restored later using special software.
If you select the Full format , all the data on the rewritable disc will be physically
erased and you will not be able to restore it later. This mode will take much more time.
Use this type of erase if you have some confidential data on the disc that must be
erased.
You can also enable the Eject disc after erasing check-box, if you do not plan to work with the disc
afterwards. If you plan to use the same disc for burning after erasing, it might be useful to leave it
unchecked.
When all the erasing parameters are set, you can press the Erase button to start the erasing process
itself. Once the erasing is started, it cannot be stopped. Please, wait for the erasing process to be
finished.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Burn Discs
Burning Discs and Images
After you select all the settings click the Start burning! button to start the recording process. You will
see the progress of the burning, the current operation and the file that is being written at the moment:
You can click the Cancel button to abort the recording, although it is not recommended as the disc
might become unreadable afterwards if the burning process is not complete. You won't be able to read
or write a CD-R, a DVD±R or a BD-R after you press this button in the middle of the burning process.
If you already have some data on the CD/DVD/BD and it was recorded using multisession mode you
can add some more data. When you insert such a disc the files already present on it will be displayed
in the Files list and marked in blue. The newly added files will be displayed in black font color:
After that you can click the Start burning! button to record the new data onto the disc.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Burn Discs
Working with Images
Sometimes you might need to create an image for your disc prior to recording it onto a CD, a DVD or a
BD. You can do that with the help of the AVS DVD Copy . Currently it supports ISO-type images,
compatible with all the main programs on the market nowadays. You can burn this image onto a CD, a
DVD or a BD later if you would like to with AVS DVD Copy or mount it to some third party virtual
drive.
You can select the ISO-image creation from the program main window:
After that you should set the file name and destination for your image and then you can record the
files and folders to the image as if it were a common optical disc.
If you already have ISO-images on your computer hard disk drive you can burn them onto a CD, a
DVD or a BD using the AVS DVD Copy software. To do that you should switch into Burn ISO work
mode, locate the image file on your computer and add it to your compilation (using drag-and-drop
method, the Add button or the Express Menu ). The program will add the files that the ISO-image
contains to your compilation.
Note : if you would like to record the ISO-image as a single file to be able to transfer it to a different
computer you will need to switch to Burn DATA work mode and add the needed ISO-image as if it
were an ordinary file. In this case the files and folders "recorded" into the image will be left inside it
and you will not be able to see them without additional software.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Appendix
Enabling the DMA Mode
DMA mode - Direct Memory Access - allows certain hardware subsystems within a computer to access
system memory for reading and/or writing independently of the CPU. Many hardware systems use
DMA including disk drive controllers, graphics cards, network cards, and sound cards.
DMA is an essential feature of all modern computers, as it allows devices of different speeds to
communicate without subjecting the CPU to a massive interrupt load. Otherwise, the CPU would have
to copy each piece of data from the source to one of its registers, and then write it back again to the
new location. During this time the CPU would be unavailable for other tasks.
A DMA transfer essentially copies a block of memory from one device to another. While the CPU
initiates the transfer, the transfer itself is performed by the DMA Controller. A typical example is
moving a block of memory from external memory to faster, internal (on-chip) memory. Such an
operation does not stall the processor, which as a result can be scheduled to perform other tasks. It is
essential in providing so-called zero-copy implementations of peripheral device drivers as well as
functionalities such as network packet routing, file copy, streaming video over a network, etc.
To enable the DMA mode you should do the following:
1. Go to the Windows Start menu and select Control Panel ;
2. In the Control Panel window choose the System icon, double-click it to open the system
propertieswindow;
3. In the Hardware tab there is a Device Manager button:
Download from Www.Somanuals.com. All Manuals Search And Download.
You should click it to open the Device Manager window:
Download from Www.Somanuals.com. All Manuals Search And Download.
Here you should find IDE ATA/ATAPI controllers among the other devices and click the "+" in front
of it to open the list of available IDE channels that the controller has.
4. Double-click the Primary IDE Channel caption to open the controller properties window:
Download from Www.Somanuals.com. All Manuals Search And Download.
In the Advanced Settings tab you will see the Transfer Mode drop-down box where the current
transfer mode is displayed. To change the transfer mode and enable DMA you should open the drop-
down box and choose DMA if available option:
Download from Www.Somanuals.com. All Manuals Search And Download.
After that click OK to accept the changes you have made. The same can be done for the Secondary
IDE Channel . After you enabled DMA modes for the IDE channels you can close the device manager
window. Sometimes the reboot might be needed to apply all the changes.
Note : not all the controllers allow the user to change the transfer mode. If you install the third party
driver for your computer IDE controller see the instructions that go along with the driver software.
Usually when the special driver for the controller is installed the DMA mode is enabled automatically by
the driver software.
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Appendix
Disc Types
AVS DVD Copy currently supports three types of optical disc formats that are available for consumer
use. This section will better explain the purpose of these formats and their place in history. With the
support of other disc types and formats the corresponding information will be added.
Compact Discs
Digital Versatile Discs
DVDs of different capacities
DVDs of different medium type
Blu-Ray Discs
Compact Discs
Digital Audio Compact Discs (CD-DA) were first introduced to the consumer audio market in 1980 by
Philips and Sony as an alternative to vinyl records and magnetic tape cassettes. In 1984, Philips and
Sony extended the technology to include data storage and retrieval and introduced a new format: the
Data Compact Disc (CD-ROM).
Since then, the Compact Disc has dramatically changed the way that we listen music and handle
electronic information. With a capacity of up to 700 megabytes of computer data or 80 minutes of high
quality audio, the Compact Disc has revolutionized the distribution of every kind of electronic
information.
In 1990, Philips and Sony extended the technology again and the Compact Disc became recordable
(CD-R). Before the introduction of the CD-R technology, compact discs were produced in commercial
replication plants by stamping the media with a pre-recorded master. Today, discs are produced in
replication plants where large quantities are required. For small production volumes (up to 500 copies
or more, depending on your location and manufacturers in your market), it can be significantly less
expensive to master your own discs using commercially available Compact Disc writing drives.
Whether a Compact Disc was stamped at a replication facility or "burned" using a compact disc
recorder, it can theoretically be read by any available CD-ROM drive. In reality, some inexpensive
media and CD players do not work very well together. Only the physical composition of a commercially
replicated disc and a CD-R disc are different. The former is coated with a reflective layer of aluminum
resulting in a typical silver color. The latter is coated with a reflective layer behind a thin layer of dye
(colors can range from blue, silver, green, and others).
In 1997 Compact Disc ReWritable (CD-RW) - a rewritable optical disc format - was introduced. While a
prerecorded compact disc has its information permanently stamped into its polycarbonate plastic
substrate, a CD-RW disc contains a phase-change alloy recording layer composed of silver, indium,
antimony and tellurium. An infra-red laser beam is employed to selectively heat and melt the
crystallized recording layer into an amorphous state or to anneal it at a lower temperature back to its
crystalline state. The different reflectance of the resulting areas make them appear like the pits and
lands of a prerecorded CD. A CD-RW recorder can rewrite 700 MB of data to a CD-RW disc roughly
1000 times.
A Compact Disc contain blocks (or sectors) of 2352 bytes each, going from the center hole to the outer
diameter. The block at logical address 0 (beginning of the disc) is located near the center of the disc;
the last addressable block (end of the disc) is located near the outer edge of the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Blank discs are usually available in the following sizes (block sizes approximated).
21 minutes = 94500 blocks
63 minutes = 283500 blocks
74 minutes = 333000 blocks
80 minutes = 360000 blocks
[Back to the Top ]
Digital Versatile Discs
In January of 1995, Sony was the first to showcase Digital Versatile Disc technology after having
announced co-development six months earlier. Three weeks later, Pioneer, Time Warner, and Toshiba
announced their own version of DVD, which had major differences from the format developed by
Philips and Sony. Immediately disputes started over which format should be used, since each had their
own advantages and disadvantages.
The disputes did not stop until May of 1995, when a major report was released by leading hardware
and software manufacturers (Apple, Compaq, Fujitsu, HP, IBM, and Microsoft), stating that the two
formats were not going to be supported by the industry when there were clear advantages in using
one format. The result was a mix of the two formats and the formation of the DVD Forum by all
companies involved in the two original formats (Matsushita, Mitsubishi, Pioneer, Philips, Hitachi, JVC,
Sony, Thompson, Toshiba, and Time Warner).
In 1996, the specifications for DVD-ROM and DVD-Video were finalized and DVD players began to ship
to market. One year later, the DVD Forum worked on the specifications for the first recordable (DVD-
R) implementation of DVD. In November of 1997, Pioneer announced the first DVD-R drives, while
Matsushita and Toshiba released the first DVD erasable (DVD-RAM) drives.
During 1998, a new coalition was formed to develop re-writable discs specifically for storage of data
based on 25-year-old CD patents. This format was initially called DVD+RW and was not allowed to use
the DVD logo after the DVD Forum ruled that it could not be used in the branch technology. While the
technologies between the two formats are similar, licensing rules dictate differences, some of which
can be witnessed in the logo branding of devices and media.
Much like Compact Discs, Digital Versatile Discs are comprised of a continuous spiral of blocks (or
sectors) starting from the center hole ending at the outer rim of the disc. The blocks are only of size
2048 bytes, making the format less complicated.
There are several types of DVD discs depending on their capacity and on the medium type .
[Back to the Top ]
The main types of DVDs that differ as to their capacity are:
Download from Www.Somanuals.com. All Manuals Search And Download.
First side
Second side
DVD disc
types
Total
capacity
First layer
Second layer
capacity
First layer
capacity
Second layer
capacity
capacity
4.7 Gb
4.3 Gb
4.7 Gb
4.3 Gb
4.3 Gb
DVD-5
DVD-9
-
-
-
4.7 Gb
8.6 Gb
9.4 Gb
13.3 Gb
17.2 Gb
4.3 Gb
-
-
-
DVD-10
DVD-14
DVD-18
4.7 Gb
4.7 Gb
4.3 Gb
-
-
4.3 Gb
4.3 Gb
4.3 Gb
DVD-5 - single sided, single layer (disc capacity about 4.7 Gb, the working surface of such a disc is
situated on one side of it and consists of one layer only);
DVD-9 - single sided, double layer (disc capacity about 8.6 Gb, the working surface of such a disc is
situated on one side of it and consists of two layers about 4.3 Gb each);
DVD-10 - double sided, single layer on both sides (disc capacity about 9.4 Gb, the working surfaces of
such a disc are situated on both its sides and either consists of one layer about 4.7 Gb);
DVD-14 - double sided, double layer on one side and single layer on the other side (disc capacity
about 13.3 Gb, the working surfaces of such a disc are situated on both its sides and consist of two
layers about 4.3 Gb each on one side and one layer about 4.7 Gb on the other side);
DVD-18 - double sided, double layer on both sides (disc capacity about 17.2 Gb, the working surfaces
of such a disc are situated on both its sides and either consists of two layers about 4.3 Gb each).
Note : the DVD capacity is measured in the so called decimal gigabytes (one gigabyte is equal to
1000 megabytes). The real size of the DVDs is smaller when measured in the so called computer
gigabytes or gibibytes (one gigabyte is equal to 1024 megabytes).
[Back to the Top ]
The disc medium can be:
DVD-ROM (read only, industrially manufactured)
A factory-made DVD that is manufactured by a press. The DVD specification Version 1.0 was
announced in 1995 and finalized in September 1996. "DVD" was originally an acronym for "digital
video disc"; some members of the DVD Forum believe that it should stand for "digital versatile disc", to
indicate its potential for non-video applications. Toshiba adheres to the interpretation of "digital
versatile disc". The DVD Forum never reached a consensus on the matter, however, and so today the
official name of the format is simply "DVD"; the letters do not "officially" stand for anything.
DVD-R (R = Recordable once)
A DVD-Recordable or DVD-R is an optical disc with a larger storage capacity than a CD-R, typically 4.7
GB instead of 700 Mb, although the capacity of the original standard was 3.95 Gb. The DVD-R format
was developed by Pioneer in autumn of 1997. It is supported by most DVD players, and is approved by
the DVD Forum. A DVD-R can be written to only once.
DVD-RW (RW = ReWritable)
A DVD-RW is a rewritable optical disc with equal storage capacity to a DVD-R, typically 4.7 GB. The
format was developed by Pioneer in November 1999 and has been approved by the DVD Forum. Unlike
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-RAM, it is playable in about 75% of conventional DVD players. The primary advantage of DVD-RW
over DVD-R is the ability to erase and rewrite to a DVD-RW disc. According to Pioneer, DVD-RW discs
may be written to about 1,000 times before needing replacement, making them comparable with the
CD-RW standard. DVD-RW discs are commonly used for volatile data, such as backups or collections of
files. They are also increasingly used for home DVD video recorders.
DVD-R DL (double layer)
DVD-R DL (Dual Layer) (Also Known as DVD-R9) is a derivative of the DVD-R format standard. DVD-R
DL discs employ two recordable dye layers, each capable of storing nearly the 4.7 GB of a single-layer
disc, almost doubling the total disc capacity to 8.54 GB. Discs can be read in many DVD devices (older
units are less compatible) and can only be written using DVD±RW DL burners.
DVD+R (R = Recordable once)
A DVD+R is a writable optical disc with 4.7 GB of storage capacity. The format was developed by a
coalition of corporations, known as the DVD+RW Alliance, in mid 2002. Since the DVD+R format is a
competing format to the DVD-R format, which is developed by the DVD Forum, it has not been
approved by the DVD Forum, which claims that the DVD+R format is not an official DVD format. The
DVD+R format is divergent from the DVD-R format. Hybrid drives that can handle both, often labeled
"DVD±RW", are very popular since there is not yet a single standard for recordable DVDs. There are a
number of significant technical differences between the dash and plus formats, and although most
consumers would not notice the difference, the plus format is considered by some to be better
engineered.
DVD+RW (RW = ReWritable)
A DVD+RW is a rewritable optical disc with equal storage capacity to a DVD+R, typically 4.7 GB
(interpreted as 4.7 · 109, actually 2295104 sectors of 2048 bytes each). The format was developed by
a coalition of corporations, known as the DVD+RW Alliance, in late 1997, although the standard was
abandoned until 2001, when it was heavily revised and the capacity increased from 2.8 GB to 4.7 GB.
Credit for developing the standard is often attributed unilaterally to Philips, one of the members of the
DVD+RW Alliance. Although DVD+RW has not yet been approved by the DVD Forum, the format is too
popular for manufacturers to ignore, and as such, DVD+RW discs are playable in 3/4 of today's DVD
players. Unlike the DVD-RW format, DVD+RW was made a standard earlier than DVD+R.
DVD+R DL (double layer)
DVD+R DL (Double Layer), also known as DVD+R9, is a derivative of the DVD+R format created by
the DVD+RW Alliance. Its use was first demonstrated in October 2003. DVD+R DL discs employ two
recordable dye layers, each capable of storing nearly the 4.7 GB of a single-layer disc, almost doubling
the total disc capacity to 8.55 GB. Discs can be read in many DVD devices (older units are less
compatible) and can only be created using DVD+RW DL and Super Multi drives. The latest DL drives
write double layer discs slower (2.4x to 8x) than single-layer media (8x-16x). A double layer rewritable
version called DVD+RW DL is also in development but is expected to be incompatible with existing DVD
devices.
DVD-RAM (random access rewritable)
DVD-RAM (DVD–Random Access Memory) is a disc specification presented in 1996 by the DVD Forum,
which specifies rewritable DVD-RAM media and the appropriate DVD writers. DVD-RAM media are used
in computers as well as camcorders and personal video recorders since 1998. You can identify a DVD-
RAM disc due to lots of little rectangles distributed on the surface of the data carrier. Compared with
other writeable DVDs, DVD-RAM is more closely related to hard disk technology, as it has concentric
tracks instead of one long spiral track. Unlike the competing formats DVD+R, DVD-R, DVD+RW and
DVD-RW, you do not need special DVD burning software to write or read DVD-RAMs on a computer.
DVD-RAMs can be accessed like a usual floppy disk or hard drive. DVD-RAM is more suited to data
backups and use in camcorders than DVD±RW. The advantages of DVD-RAM discs are the following:
long durability of minimum 30 years and they can be rewritten more than 100,000 times, and also the
fact that no DVD burning software required in computers as the discs can be used and accessed like a
removable hard disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
[Back to the Top ]
Blu-Ray Discs
Blu-ray Disc (BD) is a next-generation optical disc format meant for storage of high-definition video
and high-density data. The Blu-ray standard was jointly developed by a group of leading consumer
electronics and PC companies called the Blu-ray Disc Association (BDA), led by Sony and Philips. Blu-
ray has information capacity per layer of 25 gigabytes.
Blu-ray gets its name from the shorter wavelength (405 nm) of a "blue" (technically blue-violet) laser
that allows it to store substantially more data than a DVD, which has the same physical dimensions but
uses a longer wavelength (650 nm) red laser.
BD-R (R = Recordable once)
A single-layer Blu-ray disc (BD) can fit 23.3, 25, or 27 GB; this is enough for approximately four hours
of high-definition video with audio. A dual-layer BD can fit 46.6, 50, or 54 GB, enough for
approximately eight hours of HD video. Capacities of 100 GB and 200 GB, using four and eight layers
respectively, are currently being researched; TDK has already announced a four-layer 100 GB disc.
BD-RE (RE = REwritable)
The BD-RE (rewritable) standard is available, along with the BD-R (recordable) and BD-ROM formats,
which became available in mid-2004, as part of version 2.0 of the Blu-ray specifications. BD-ROM pre-
recorded media are to be available by early 2006.
In addition to 12 cm discs, an 8 cm variation for use with camcorders is planned that will have a
capacity of 15 GB.
To ensure that the Blu-ray Disc format is easily extendable (future-proof) it also includes support for
multi-layer discs, which should allow the storage capacity to be increased to 100GB/200GB (25GB per
layer) in the future simply by adding more layers to the discs.
Blu-ray drives currently in production can transfer approximately 36 Mbit/s (54 Mbit/s for BD-ROM),
but 2x speed prototypes with a 72 Mbit/s transfer rate are in development. Rates of 8x or more are
planned for the future.
Because the Blu-ray standard places data so close to the surface of the disc, early discs were
susceptible to dust and scratches and had to be enclosed in plastic caddies for protection. The solution
to this problem arrived in January 2004 with the introduction of a clear polymer that gives Blu-ray
discs unprecedented scratch resistance. The coating, developed by TDK Corporation under the name
"Durabis," allows BDs to be cleaned safely with only a tissue - a procedure that can damage CDs,
DVDs. Bare BDs with the coating are reportedly able to withstand attack by a screwdriver.
[Back to the Top ]
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Appendix
Frequently Asked Questions
Table of contents
Where can I get a registered version of the software or how can I register the software using
the website provided?
Where can I find a boxed version of your software?
Is there a user guide or manual available for this software?
Which operating system I can use AVS DVD Copy with?
Answers
Where can I get a registered version of the software or how can I register the software
using the website provided?
Use the windows Start menu to register AVS DVD Copy . Go to Start menu -> All Programs ->
AVS Media -> AVS DVD Copy -> Register AVS DVD Copy , enter your Registration name and
Serial number that you received during registration.
It is important to enter your name (Registration Name ) exactly as you did it at purchase, because
"John Doe" and "John A. Doe" or "JOHN DOE" are not the same thing.
The simplest way is to copy the Registration name and the Serial number from your registration
letter and to paste them to the appropriate boxes of the registration window. This is ESPECIALLY
important if you have Unicode characters in your name.
To do this:
1. highlight your registration name in your registration letter, received from us and right-click it;
2. select "Copy" in the right-click menu;
3. move the cursor to the appropriate box in the registration window of the AVS DVD Copy ;
4. right-click the the box and select "Paste" from the menu. Do the same with the serial number.
Some tips to remember:
1. Make sure that there is no space before and after the registration name and serial number.
2. Make sure that you are not mistaking the letter "O" for the figure "0" (zero).
Internet connection is necessary to complete the registration. Make sure your computer has
access to Internet, otherwise you won't be able to register the software!
You might also need to disable your antivirus or firewall or make sure that the AVS DVD Copy
program is allowed to access the Internet.
If you are sure that you are entering a correct login-serial number combination, please visit our
Registration Help Page to receive immediate help.
[Back to the Top ]
Where can I find a boxed version of your software?
AVS DVD Copy is not sold in boxed version. You can download and install the program from our web
Download from Www.Somanuals.com. All Manuals Search And Download.
[Back to the Top ]
Is there a user guide or manual available for this software?
You can use our Help file which is included into installation of AVS DVD Copy or contact our support
[Back to the Top ]
Which operating system I can use AVS DVD Copy with?
AVS DVD Copy is supported by the following platforms:
Windows versions
Windows 9x versions
4.0.950
Windows 95
Unsupported
Unsupported
Unsupported
Unsupported
Unsupported
Unsupported
4.0.1111
4.0.1212
4.1.1998
4.1.2222
4.9.3000
Windows 95 OSR 2 & OSR 2.1
Windows 95 OSR 2.5
Windows 98
Windows 98 Second Edition
Windows Me
Windows NT versions
Windows NT 4.0 & NT 3.51
Windows 2000
4.0.1381
5.0.2195
5.01.2600
6.0.6000
Unsupported
Supported
Supported
Supported
Windows XP
Windows Vista
You can easily find out your Windows' version info. Go to Start menu and select Run . Type winver
and click [OK] .
[Back to the Top ]
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
AVS DVD Copy
Send comments on this topic.
Appendix
How To
Table of contents
I have a rewritable disc with closed session, but want to add some files to it as it has much
free space. How can I do that?
Answers
I have a rewritable disc with closed session, but want to add some files to it as it has much
free space. How can I do that?
You cannot add files to a closed rewritable disc without erasing it. But you can retain the information
already stored on the disc. To do that you need to copy your files from the disc to some place on your
computer, then start the AVS DVD Copy and erase the rewritable disc. After that you can add the
previously saved files to your compilation, add new files and click the Burn button. As a result you will
have new files added to the disc where all your files are saved as well.
[Back to the Top ]
© 2007 Online Media Technologies Ltd., London, UK. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|