Audiovox Car Stereo System CDC FDF User Manual

INSTALLATION GUIDE FOR:  
CD CHANGER  
INTERFACE CABLE  
for FORD VEHICLES  
Models CDC-FDF & CDC-FDR  
Form No. 128-5315  
CAUTION: FOLLOW THE CONNECTION SEQUENCE DESCRIBED BELOW TO ENSURE PROPER  
RECOGNITION OF THE CD CHANGER BY THE FACTORY RADIO.  
DO NOT FORCE CONNECTORS TOGETHER. LINE UP LOCATING TABS AND CAREFULLY  
MATE CONNECTORS.  
INSTALLATION INSTRUCTIONS FOR THE CDC-FDR: (Fig. 1)  
IMPORTANT : Vehicles with electronic heating/AC controls may experience intermittent operation of these controls  
when the CD Changer is disconnected.  
1. Mount the CD changer at the desired location in the trunk following the installation instructions supplied  
with the CD changer.  
2. Carefully connect the 8-pin circular DIN connector from the CDC-FDR to the mating socket on the CD  
Changer.  
3. Route the CDC-FDR cable toward the factory tuner/amplifier pack located in the rear left wheel well.  
4. With the vehicle off, unplug the power/speaker connector from the tuner/amplifier pack.  
5. Carefully connect the data cable from the CDC-FDR to the mating socket on the tuner/amplifier pack.  
6. Carefully connect the vehicle side power/speaker cable to the mating connector on the CDC-FDR.  
7. Carefully connect the power/speaker connector from the CDC-FDR to the mating socket on the tuner/  
amplifier pack.  
INSTALLATION INSTRUCTIONS FOR THE CDC-FDF: (Fig. 2)  
IMPORTANT : When mounting the CD Changer in the rear of the vehicle, it may be necessary to purchase  
separately the AK-98-CDA, data cable adaptor. The AK-98-CDA allows the 20-foot data cable  
supplied with the CD Changer to connect to the CDC-FDF.  
1. Mount the CD Changer at the desired location either in the center console (CDC-620 only) or in the rear of  
the vehicle. Refer to the installation instructions supplied with the CD Changer.  
2. Carefully connect the 8-pin circular DIN connector from the CDC-FDF to the mating socket on the CD  
Changer. The AK-98-CDA may be required when rear mounting the CD Changer.  
3. Route the CDC-FDF cable toward the factory radio.  
4. Remove the factory radio from the dash panel using the factory removal tools.  
5. Unplug both the power/speaker and CD Changer connectors from the rear of the radio.  
6. Carefully connect the vehicle power/speaker and CD Changer connectors to the respective mating con-  
nectors on the CDC-FDF.  
7. Carefully connect the power/speaker and CD Changer connectors of the CDC-FDF to the respective  
mating connectors at the rear of the radio.  
OPERATION CHECK:  
1. Load CD's into the CD Changer cartridge and insert the cartridge into the changer.  
2. Start vehicle and allow CD Changer to cycle.  
Perform a brief functional test to verify proper operation according to the owner's manual.  
Audiovox Corporation, 150 Marcus Blvd., Hauppauge, N.Y. 11788  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

8e6 Technologies Computer Hardware MSA 004 005 User Manual
Actiontec electronic Network Router GT701WG QW04 User Manual
AEG Refrigerator SKS71200F0 User Manual
Air King Vacuum Cleaner CVEK3000 User Manual
AMD Computer Hardware K3780E User Manual
American Audio DJ Equipment Q 2422 MKII User Manual
AMX Switch TVS User Manual
ATN Binoculars MO 4 User Manual
Axis Communications Security Camera p1357 e User Manual
BC Speakers Speaker System 6 PE 13 User Manual