Audiovox Automobile Electronics RVMPKG4 User Manual

Rearview Mirror with 4" Color LCD Monitor  
and Camera Package  
Model: RVMPKG4 (V2.0)  
Installation Manual  
Features:  
Rearview Mirror with 4" LCD Monitor  
Built-In Speaker  
Rearview Camera Input  
Auxiliary Video Input  
Automatically Displays Backup Camera Image  
Camera  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Warnings  
1
3
Product description  
Packing list  
3
Installation Instructions  
1. Signal Input  
4
5
2. Control and Indicator  
3. Auxiliary Input Switch  
Specifications  
6
7
7
Maintenance  
8
Troubleshooting  
9
Illustration of connections  
10  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Description  
There is a blind spot that exists at the back of a vehicle while the vehicle is in  
reverse. Equipped with a camera, this electronic rearview mirror provides the  
driver with a clear and wide image of the area behind the vehicle whenever the  
vehicle is shifted into reverse.  
Backing up vehicle  
Do not back up vehicle while watching the mirror/monitor screen. Always look  
in the direction of vehicle motion. Use the mirror/monitor as an aid in safety  
confirmation. The actual distance is shorter than it looks in the monitor. The  
range of image is limited. Beware of blind spots.  
Packing list  
Item  
Description  
Figure  
1
Rear View Mirror  
Control Box  
2
3
Power Cable  
4
Fastening Belts  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear View  
CMOS1 Camera  
Parts list included with camera  
installation manual  
5
6
Camera Cable  
1. Installation Instructions  
(1) Mount the mirror/monitor  
a). Take the two belts and slide them into  
the slots on the top rear of the mirror  
with the grooved side of the belt facing  
down.  
Figure 1  
b). Take the buckles and slide them into the  
lower slots on the rear of the mirror with  
the buckle facing down toward the strap.  
NOTE: The large open rectangle on the  
buckle will face away from the strap  
Figure 2  
c). Mount the new rearview mirror / monitor  
over the existing mirror. Slide the rearview  
mirror onto the existing mirror from one  
side with one strap mounted to the mirror.  
Then attach the other strap to the other side  
Figure 3  
of the mirror. Securely tighten both straps on the mirror to  
prevent the mirror from falling off..  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
d). Trim off excess length of the straps.  
e). Place (hide) the monitor cable behind the windshield trim piece down under  
the dash area.  
(2) Wiring the Monitor  
a) RED FUSED WIRE: 12VDC ACCESSORY SOURCE  
Connect this wire to a source that has 12 volts when the Ignition key switch is  
turned on, and 0 volts when the Ignition key switch is turned off.  
b) BLACK WIRE: CHASSIS GROUND  
Connect this wire to a solid, metal part of the vehicle’s chassis.  
c) PINK WIRE: GROUND WHEN PARKING BRAKE IS APPLIED  
Connect this wire to the wire from the parking brake that turns on the parking  
brake light on the dash, this wire will have ground when the parking brake is  
pressed.  
(3) Connect the mirror cable and power cable as shown in Figure 6  
on page 10.  
2. Signal Inputs  
The signal input connections for the system include:  
(1) Rear Camera: Connect the yellow & white RCA connectors to the same  
color RCA plug on the extension cable. Run the extension cable to the  
control box and connect the yellow & white RCA connectors on the  
extension cable to the RCA plugs on the control box. Connect the control  
box cable to the rearview mirror cable as shown in figure 6, on page 10.  
(2) Audio/Video Input Plugs: RCA are located at the end of the control box.  
By connecting video and audio signals with these plugs. The user can watch  
the auxiliary video input only when the parking brake is engaged.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 4  
3. Controls and Indicators  
Figure 5  
Figure 5 illustrates the controls and indicators of the RVMPKG4(V2.0) rear view  
mirror:  
A: Rearview mirror  
B: 4" LCD panel  
C: Brightness control knob  
D: Power indication (Red when ignition is on)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
E: Speaker volume control  
G: Speaker in rear of mirror  
F: Auxiliary input switch (see below)  
Auxiliary Input Switch:  
Auxiliary input switch: To access the 2nd A/V input press the switch. Note:  
The parking brake must be engaged in order to view the 2nd input.  
Specification  
General  
Power Supply  
DC 12V  
Power Consumption  
Current Draw  
10W  
500mA  
Video Input/Output  
Audio Input  
1Vp-p/75 Impedance  
<=500mV  
Audio Power Output  
Overall Dimension  
0.5W(16)  
11W X 3.75H X 1.25D inch  
Display System  
Screen  
4” TFT Color LCD  
Brightness  
250 nit  
Contrast Ratio  
LCD Viewing Angle  
150 : 1  
Top-10°, Bottom 30°, Left 45°,  
Right 45°  
960×234  
NTSC  
Resolution  
Video Format  
Display Format  
4 : 3  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
Though your Rearview mirror requires little care, you can still  
maintain its condition and performance following the procedures below.  
Keep your system away from excessive moisture, extreme heat or cold and  
magnetic fields.  
Keep liquids away from the display mirror.  
To avoid damage, do not place auxiliary devices or other objects on the top  
of the mirror.  
Occasionally clean the surface of the mirror with soft cloth moistened with  
water or window cleaner.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Symptoms  
Solutions  
1. Check the installation-wiring diagram.  
2. Ensure that the parallel red and black line  
from the control box is connected  
properly.  
The ON/OFF signal light  
<D> is not on after the car is  
started?  
1. Check the LCD Contrast (Brightness)  
control knob whether the contrast knob is  
set too low  
No video signal appears  
while reversing the car?  
2. Check the rearview Camera lens.  
3. Check the rearview Camera wiring and  
connection.  
4. Check the cable from the rearview mirror  
is connected properly.  
Video image is not sharp  
enough?  
Clean the lens of the camera.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Illustration of Connections  
Refer to CMOS1 camera installation manual  
Parts list included with camera  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2007 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Network Card 3C990B TX M User Manual
Acer Flat Panel Television LCD S243HL User Manual
AEG Universal Remote NRC50 User Manual
Aiphone Intercom System IC 2ADU Type A User Manual
Airlink Switch UG AGIGA5SW 1105 User Manual
AKG Acoustics Headphones 3052H00040 User Manual
Alto Shaam Food Warmer PD2SYS 72 User Manual
Axis Communications Security Camera AXIS M1144 L User Manual
Axis Communications Security Camera P5512 PTZ User Manual
Beko Double Oven DVC665 User Manual