Atlona Pet Fence AT HD BIR40SR User Manual

User Manual  
AtlonA  
HDMITM 1.3 Extender with Bi-directional IR  
up to 200ft  
AT-HD-BIR40SR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
INTRODUCTION:  
Atlona Technologies AT-HD-BIR40SR HDMITM v1.3 Extender with Bi-directional IR boosts your audio/video  
transmission distance up to 200ft (60m) in HDTV 1080i format, 130ft (40m) in HDTV 1080p format, and 65ft (20m)  
in HDTV 1080p with 36 bit color depth. With two cost effective solid Cat-5/5e/6 UTP/STP cable, users can readily  
extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant  
with TMDS to distant display monitors including HDMITM or DVI enabled TV sets or LCD PC monitors. The AT-HD-  
BIR40SR also features with embedded IR input and output on both sender and receiver units so users can control  
the source device or HDMITM display at romote site via IR remote in di-directional IR pass-through.  
The AT-HD-BIR40SR includes two units: Sender unit and Receiver unit. The Sender unit sends the HDMITM or DVI  
signals received from the source device and receives IR signals from the Receiver unit or sends the received IR  
signal from the Sender unit via two low cost Cat-5/5e/6 cables. The Receiver unit is responsible for equalizing the  
audio/video data received from the sender unit and sends the IR signals received from the IR receiver to the Sender  
unit or receives IR signals from the sender unit . The transmission distance between the audio/video source and the  
display can be up to 60m / 200ft under HD resolution (720p/1080i), or 40m / 130ft under Full HD resolution (1080p).  
With 8-level digital signal equalization control on the receiver unit, users can adjust the signal level equalization scale  
to the received audio/video signals, and therefore optimize the transmission distance between source and display.  
FEATURES:  
• HDMITM 1.3c and HDCP compliant  
• Extends the transmission length up to 200ft (60m) from the HDMITM sources under HD resolution (1080i or 720p at  
24-bit color depth)  
• Extends the transmission length up to 130ft (40m) from the HDMITM sources under Full HD resolution (1080p at 24-  
bit color depth)  
• Extends the transmission length up to 65ft (20m) from the HDMITM sources under Full HD resolution (1080p at 36-  
bit color depth)  
• Minimizes the cable skew by adjustable 8-level equalization rotary control  
• Supports half-duplex bi-directional IR pass-through  
• Supports full frequency of IR signals from 20kHz to 60kHz  
• Purely unaltered uncompressed 7.1ch digital HDMITM over CAT5/6 cable transmission  
• Wall mounting housing design for easy and robust installation  
The length depends on the characteristics and quality of the cables. Higher resolutions and longer transmission  
distances require low skew cables (<25ns/100m) for best performance.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
PACKAGE CONTENTS:  
• 1x AT-HD-BIR40SR (Transmitting and Receiving Modules)  
• 1x IR blaster extension cable  
• 1x IR receiver extension cable  
• 1x 5V DC power supply unit  
• 1x User's manual  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
SPECIFICATIONS:  
Technical  
Transmitter  
Receiver  
3D Support  
Yes  
Yes  
HDMITM compliance  
HDCP compliance  
Video bandwidth  
Video support  
HDMITM 1.3c  
Yes  
Single-link 225MHz (6.75Gbps)  
480i / 480p / 720p / 1080i / 1080p60 24/30/36-bit color  
HDMITM transmission  
[24-bit]  
Full HD (1080p) 130ft (40m) [CAT5e] / 165ft (50m) [CAT6]  
HD (720p/1080i) 165ft (50m) [CAT5e] / 200ft (60m) [CAT6]  
Audio support  
Surround sound (up to 7.1ch) or stereo digital audio  
8-level digital control at receiver  
1.2 Volts [peak-to-peak]  
Equalization  
Input TMDS signal  
Input DDC signal  
5 Volts [peak-to-peak, TTL]  
[1] Human body – ±19kV (air-gap discharge) & ±12kV (contact discharge)  
ESD protection  
[2] Core chipset – ±8kV  
PCB stack-up  
IR remote control  
IR pass-through  
Input  
4-layer board [impedance control — differential 100 ; single 50 ]  
Electro-optical characteristics: = 25 / Carrier frequency: 20-60kHz  
τ
°
Bi-directional  
1x HDMITM + 1x 3.5mm  
2x RJ45 + 1x 3.5mm  
Output  
2x RJ45 + 1x 3.5mm  
1x HDMITM + 1x 3.5mm  
HDMITM connector  
RJ45 connector  
3.5mm socket  
Rotary control switch  
Mechanical  
Type A [19-pin female]  
WE/SS 8P8C with 2 LED indicators  
Blue socket for IR blaster / Green socket for IR receiver  
None  
Signal level equalization  
Housing  
Metal enclosure  
Model  
83 x 74 x 27mm (3.3” x 2.9” x 1.1”] for sender / receiver  
270 x 175 x 80mm (10.6” x 6.9” x 3.1”)  
215g (7.6 oz) for sender / receiver  
815g (1.8 lbs)  
Dimensions  
[L x W x H]  
Package  
Model  
Weight  
Package  
Fixedness  
Wall-mounting case with screws  
5V DC either at Sender Unit or at Receiver Unit  
1.5 Watts [max]  
Power supply  
Power consumption  
Operation temperature  
Storage temperature  
Relative humidity  
0~40 C (32~104 F)  
°
°
-20~60 C (-4~140 F]  
°
°
20~90% RH (no condensation)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
PANEL DESCRIPTIONS:  
5.1. Transmitting Module  
5.1.1. Front Panel  
IR RECEIVER: 3.5mm infrared socket for plugging in the extension cable of IR receiver  
IR BLASTER: 3.5mm infrared socket for plugging in the extension cable of IR blaster  
HDMI IN: Connects to a HDMI source with a HDMI male-male cable  
5.1.2. Rear Panel  
+5V DC: Connect to 5V DC power supply unit either at the Sender Unit or the Receiver Unit. Powered at one end is  
enough to supply the whole extender set.  
AUDIO VIDEO: Connect a Cat-5/5e/6 cable to the AUDIO/VIDEO port on the receiver unit  
CONTROL CHANNEL: Connect a Cat-5/5e/6 cable to the CONTROL CHANNEL port on the receiver unit  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
5.2. Receiving Module  
5.2.1. Front Panel  
+5V DC: Connect to 5V DC power supply unit either at the Receiver Unit or the Sender Unit. Powered at one end is  
enough to supply the whole extender set.  
AUDIO VIDEO: Connect a Cat-5/5e/6 cable to the AUDIO/VIDEO port on the sender unit  
CONTROL CHANNEL: Connect a Cat-5/5e/6 cable to the CONTROL CHANNEL port on the sender unit  
5.2.2. Rear Panel  
IR RECEIVER: 3.5mm infrared socket for plugging in the extension cable of IR receiver  
IR BLASTER: 3.5mm infrared socket for plugging in the extension cable of IR blaster  
HDMI OUT: Connects to a HDMI display or projector with a HDMI male-male cable  
EQ: Adjust the 8-level signal equalization control to the received HDMI signals. The HDMI signal level varies from  
MAX (strongest) to MIN (weakest) for respective transmission length from longest possible range to short  
distance. Dial the EQ from MIN to MAX and stop turning the rotary switch whenever the audio/video is playing  
normally. Inappropriate signal level setting may cause overpowering issues that would shorten the product's life  
significantly!  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
IR PASS-THROUGH:  
6.1 IR Extenders  
IR Blaster  
IR Receiver  
6.2 IR Sockets  
IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver from the other enf  
to control the devices corresponding to the IR signals.  
IR RECEIVER: plug in the IR receiver to receive all IR command signals from the IR remote controls of the  
corresponding devices.  
CAUTION!  
Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please  
check carefully before plugging in the IR extender to the respective IR sockets. Warranty will not  
cover the damage.  
6.3. Definition of IR Earphone Jack.  
IR Blaster  
IR Receiver  
1. Power  
1. IR Signal [20-60KHz]  
2. Grounding  
2. IR Signal [20-60KHz]  
3. Grounding  
1 2  
1 2 3  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
6.4 Supported IR Data Format.  
Data Format  
Suitable  
Not Recommended  
NEC  
v
v
v
v
v
v
v
RC5  
TOSHIBA MICOM CODE  
GRUNDIG CODE  
SONY 12 BIT CODE  
SONY 15 BIT CODE  
SONY 20 BIT CODE  
RCA CODE  
v
v
v
RCM CODE  
MATSUSHITA CODE  
MITSUBISHI CODE  
ZENITH CODE  
JVC CODE  
v
v
v
v
v
v
v
v
v
v
v
M50560-001P  
MN6125H  
MN6125L  
MN6014_C5D7  
MN6014-C6D6  
MC14457P  
LC7464(AHEA)  
GEMINI_CM  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
INSTALLATION:  
1. Connect a HDMITM or DVI source (e.g., a Blu-ray Disc player) to the Transmitting Module.  
2. Connect a HDMITM or DVI display (e.g., a HDTV) to the Receiving Module.  
3. Connect two solid Cat-5/5e/6 UTP/STP cable between the Transmitting and Receiving Modules.  
4. Make sure these two solid Cat-5/5e/6 UTP/STP cable are tightly connected and not loose.  
5. If you want to control the source devices at display side, plug in the IR blaster to the Transmitting Module and the  
IR receiver to the Receiver Unit. If you want to control the display at source side, plug in the IR receiver to the  
Transmitting Module and the IR blaster to the Receiving Module.  
6. Plug in the 5V DC power supply unit to the latch-locking power jack on either the Sender Unit or the Receiver Unit.  
7. If you see flickering or blinking image on the display, adjust the rotary control switch to improve the cable skew.  
MAX stands for the strongest HDMITM signal level for longest possible transmission length while MIN stands for  
the weakest HDMITM signal level for short transmission length. Try adjusting the signal level from MIN to MAX to  
find the optimal setting for the HDMITM over CAT5 transmission.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
RJ45 / CAT5 PIN DEFINITION:  
Audio/Video Port  
Control Channel Port  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
CONNECTION DIAGRAM:  
AT-HD-BIR40SR  
DVD  
CAT5/6 cable  
AT-HD-BIR40SR  
or plasma TV  
LCD TV  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
NOTICE:  
1. When adjusting the signal level on the receiver unit, please dial the rotary control switch from MIN to MAX and  
stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may  
cause overpowering issue that would shorten the product life significantly!  
2. If the DVI or HDMITM device requires the EDID information, please use AT-DVISync EDID Reader/Writer to retrieve  
and provide DVI or HDMITM display EDID information.  
3. All HDMITM over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz UTP cable and  
ASTRODESIGN Video Signal Generator VG-859C.  
4. The transmission length is largely affected by the type of Cat-5/5e/6 cables, the type of HDMITM sources, and  
the type of HDMITM display. The testing result shows solid UTP cables (usually in the form of 300m [1,000ft] bulk  
cables) can transmit a lot longer signals than stranded UTP cables (usually in the form of fixed length patch  
cords). Shielded STP cables are better suited than unshielded UTP cables. A solid UTP Cat-5e cable shows  
longer transmission range than stranded STP Cat-6 cable. For long extension applications, solid UTP/STP cables  
are the only viable choice.  
5. EIA/TIA-568-B termination (T568B) for Cat-5/5e/6 cables is recommended.  
6. To reduce the interference among the unshielded twisted pairs of wires in Cat-5/5e/6 cable, one can use double  
shielded STP cables to improve EMI problems, which is worsen in long transmission.  
7. Because the quality of the category cables has the major effect on how long the transmission limit can achieve  
and how good is the received picture quality, the actual transmission range is subject to one's choice of Cat-5/5e/6  
cables. For desired resolutions greater than 1080i or 1280x1024, a Cat-6 cable is recommended.  
8. If your HDMITM display has multiple HDMITM inputs, it is found that the first HDMITM input [HDMITM input 1] generally  
can produce better transmission performance among all HDMITM inputs.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
PERFORMANCE GUIDE:  
Performance rating  
Type of category cable  
Wiring  
Solid  
Shielding  
CAT5  
  
  
CAT5e  
  
  
  
CAT6  
  
  
  
Unshielded (UTP)  
Shielded (STP)  
Unshielded (UTP)  
Shielded (STP)  
Stranded  
  
Termination  
Please use EIA/TIA-568-B termination (T568B) at any time  
ATLONA PRODUCT REGISTRATION:  
Thank you for purchasing this Atlona product — we hope you'll enjoy it.  
We also hope that you'll take a few moments to register your new purchase. Registration creates an ownership record if your  
product is lost or stolen and helps ensure you'll receive notification of performance issues and firmware updates.  
At Atlona, we respect and protect your privacy and assure you that your registration information is completely secure. Of  
course, Atlona product registration is totally voluntary and failure to register will not diminish your limited warranty rights.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
SAFETY INFORMATION:  
Protect and route power cords so they will not  
be stepped on or pinched by anything placed on  
or against them. Be especially careful of plug-  
ins, or cord exit points from this product.  
Safeguards  
To reduce the risk of electric shock, do not  
expose this product to rain or moisture.  
Avoid excessive humidity, sudden temperature  
changes or temperature extremes.  
If the wall plug does not fit into your local power  
socket, hire an electrician to replace your  
obsolete socket.  
Keep this product away from wet locations such  
as bathtubs, sinks, laundries, wet basements  
and swimming pools.  
Do not modify the wall plug.  
Use only accessories recommended by ATLONA  
to avoid fire, shock or other hazards.  
Doing so will void the warranty and safety  
features.  
Unplug the product before cleaning. Use a  
damp cloth for cleaning. Do not use cleaning  
fluid or aerosols, which could enter the unit and  
cause damage, fire or electrical shock. Some  
substances may also mar the finish of the  
product.  
This equipment should be installed near the  
socket outlet and the device should be easily  
accessible in case it requires disconnection.  
Precautions  
FCC Regulations state that any unauthorized  
changes or modifications to this equipment  
not expressly approved by the manufacturer  
could void the user's authority to operate this  
equipment.  
Never open or remove unit panels or make  
any adjustments not described in this manual.  
Attempting to do so could expose you to dan-  
gerous electrical shock or other hazards. It may  
also cause damage to your AT-HD-BIR40SR.  
Opening the product will void the warranty.  
Operate this product using only the included  
external power supply. Use of other power  
supplies could impair performance, damage the  
product or cause fires.  
Do not attempt to service the unit. Instead  
disconnect it and contact your Authorized  
ATLONA reseller or contact ATLONA directly.  
In the event of an electrostatic discharge, this  
device may automatically turn off. If this occurs,  
unplug the device, and plug it back in.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
WARRANTY:  
1. LIMITED WARRANTY  
Atlona Technologies warrants that (a) its products (the "Product") will perform substantially in accordance with the  
accompanying written materials for a period of 3 years from the date of receipt and (b) that the Product will be free from  
defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law  
imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some jurisdictions  
do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to Customer.  
2. CUSTOMER REMEDIES  
Atlona Technologies and its suppliers' entire liability and Customer's exclusive remedy shall be, at Atlona Technologies'  
option, either return of the price paid for the Product, or repair or replacement of the Product that does not meet this Limited  
Warranty and which is returned to Atlona Technologies with a copy of Customer's receipt. This Limited Warranty is void if  
failure of the Product has resulted from accident, abuse, or misapplication. Any replacement Product will be warranted for the  
remainder of the original warranty period or 3 year, whichever is longer.  
3. NO OTHER WARRANTIES  
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ATLONA TECHNOLOGIES AND ITS SUPPLIERS  
DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE  
PRODUCT AND ANY RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMER SPECIFIC  
LEGAL RIGHTS. CUSTOMER MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION.  
4. NO LIABILITY FOR DAMAGES  
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL ATLONA TECHNOLOGIES  
OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, SPECIAL,  
INCIDENTAL, CONSEQUEN-TIAL, OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS,  
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT  
OF THE USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF ATLONA TECHNOLOGIES HAS BEEN ADVISED  
OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, ATLONA TECHNOLOGIES' AND ITS SUPPLIERS' ENTIRE  
LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY  
YOU FOR THE PRODUCT. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF  
LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  

AEG Clothes Dryer T76280AC User Manual
Aiphone Smoke Alarm 4A User Manual
Akai Cassette Player GX 6 User Manual
Amana Clothes Dryer LED250 User Manual
AMC Stereo Amplifier XG16 User Manual
American Dryer Corp Clothes Dryer AD 78 IV User Manual
Audiovox Automobile Alarm APS 101 User Manual
Audiovox Automobile Electronics PRO 9232 User Manual
Avenview TV Cables HDM C5 3 R User Manual
Beko CRT Television 24 User Manual