CFT-125
FAN THERMOSTAT FOR RACK EQUIPMENT
Cooling
Accessory Plug
Connects
to the Top
of the CFT-125
Plug
CFT-125 Shown with Rack Mount Blower (order separately)
OPERATION
FEATURES
• Regulates Cooling Devices for Energy Savings and Consistent Operation
• Easy-to-Read Adjustable Dial Settings from 40° to 90°F
• Reduces Fan Noise
1. Plug the thermostat into an outlet of the proper voltage for the
cooling equipment.
2. Plug the fan cord into the receptacle in the thermostat's plug.
3. Turn thermostat knob toward the "cooler" position (counterclockwise)
until the cooling equipment starts.
• Easy Installation Using Mounting Hanger and Keyhole Mounting Slots
• Maintenance-Free Reliability
4. WARNING: When used with the thermostat, the fan may start at
any time. Always unplug equipment and thermostat when not in use.
• UL and CSA Listed
5. To reduce the risk of electric shock, this equipment has a polarized
plug (One blade is wider than the other). This plug will fit in a polar-
ized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in any way.
GENERAL DESCRIPTION
The Atlas-Sound CFT-125 thermostat provides ventilation control of
fans or other cooling equipment. The unit will automatically shut off
fans when they are not needed. This cost-savings feature results in
longer fan life, fewer filter changes, and reduced electrical usage.
ARCHITECT AND ENGINEER SPECIFICATIONS
The CFT-125 fan thermostat includes a special 3-wire extension cord
with series plug for automatic operation. It is also equipped with a wire
hanger and keyhole mounting slots for versatile and easy installation.
Fan Thermostat shall be an Atlas-Sound model CFT-125 or approved
equal. The thermostat shall have adjustable dial settings from 40° to
90°F. Unit shall be mountable vertically or horizontally into a rack
using a supplied mounting hanger or keyhole slot. The thermostat
shall include a six-foot, 3-wire extension cord with series plug for
automatic operation. The fan thermostat shall be finished in semi-
gloss black.
SPECIFICATIONS
Electrical Rating: 13A, 125 VAC Resistive
1/2hp, 125 VAC 9.8 FLA, 125 VAC 58.8 LRA, 125 VAC
Temperature Range: 0° – 110°F
Differential: Approximately 8°F Heating/Cooling
Dimensions: 5.50" x 1.50" x 2.50" (140 x 38 x 64mm)
Cord Length: 6' (1830mm)
Color: Semi-Gloss Black
Weight: 1.4 lbs (.63kg)
INSTALLATION
NOTE: If the CFT-125 is used to replace a device containing
mercury, the purchaser or consumer must ensure that the mer-
cury is properly managed to comply with state or federal regu-
lations. The mercury must not become part of solid waste or
waste water.
1. Locate the thermostat to obtain the best temperature control.
2. DO NOT hang or mount the thermostat near or directly behind
cooling devices in the cabinet as this will cause the system to shut off
before the desired temperature is reached.
Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
449
© 2001 Atlas Sound LP
Printed in U.S.A.
000501
SL10-1603
Download from Www.Somanuals.com. All Manuals Search And Download.
|