Atlas Computer Monitor ATM1900 User Manual

TM  
3505 HUTCHINSON ROAD  
CUMMING, GA 30040-5860, USA  
ATLAS  
INDUSTRIAL FLAT PANEL PC MONITOR  
QUICK INSTALLATION GUIDE - ATM1900/ATM1900T  
Description:  
The Atlas ATM1900/ATM1900T is a high performance 19" color TFT  
flat panel monitor specifically designed for harsh industrial  
environments including Class I & II, Division 2 Hazardous Locations.  
The ATM1900/ATM1900T accepts standard analog VGA input or  
digital DVI input, and can display all VESA video modes up to 1280 x  
1024 at 75 Hz with 16 million colors. An optional 5-wire analog touch  
screen (ATM1900T) is available that offers both RS-232 and USB  
interface capability. The monitor is housed in a heavy duty steel chassis  
with a powder coated machined aluminum bezel. The monitor is  
certified to NEMA 4/4X/12 standards, is UL/CUL listed, meets CE  
requirements and is RoHS compliant. Panel mounting is simplified  
using convenient mounting clips instead of conventional studs. All  
monitors are shipped with a power input wiring receptacle, 6’ VGA  
ATM1900/ATM1900T  
cable, 6’ RS-232 cable (ATM1900T only), 2m USB Cable  
(ATM1900T only), mounting hardware, this Quick Installation Guide,  
and CD-ROM containing Hardware User’s Guide (ATM-19-USER)  
and touch screen driver software for Windows 98/NT/2000/XP/Vista.  
NOTE: SEE THE HARDWARE USERS GUIDE, ATM-19-USER,  
INCLUDED ON THE SUPPLIED DOCUMENTATION & DRIVER CD FOR  
ADDITIONAL DETAILS. THE USERS GUIDE IS IN PDF FILE FORMAT AND  
REQUIRES DOWNLOADING ADOBES FREE ACROBAT READER TO OPEN  
AND VIEW.  
1. Verify Contents of the Box:  
AtlasFlat Panel Monitor – ATM1900 or ATM1900T (The “T” at the end of  
the part number designates the touch screen option.)  
• VGA video cable – 6’ length  
Dimensions:  
• RS-232 Serial touch screen cable (ATM1900T only) – 6’ length  
• USB touch screen cable (ATM1900T only) – 2m length  
• Mounting clips and screws (qty of 14)  
• USB retention bracket and mounting screw (ATM1900T only)  
• Documentation and Driver CD  
Contents:  
Packaging  
Material  
Atlas  
Monitor  
Mounting Clips  
(qty. 14)  
USB Cable  
(“T” ver. only)  
Agency Approvals:  
RS-232 Cable  
& hex spacers  
(“T” ver. only)  
Certifications & Standards  
Name  
UL508  
UL1604  
CE  
EN 55022-1: Class A,  
EN 61000-3-2: Class A,  
EN 61000-3-3,  
U
Documentation  
& Driver CD  
VGA Video  
Cable  
L
R
C
US  
Atlas  
Flat Panel Monitor  
E191072  
E313546  
EN 61000-6-2,  
IEC 60950-1  
Download from Www.Somanuals.co1m. All Manuals Search And Download.  
5. Connect Power to the Monitor  
• Power source needs to be 100 - 240 VAC, 50/60 Hz, ͧ35 Watts.  
• See connection diagram below.  
Power Connections:  
100 VAC - 240 VAC INPUT (1.0 Amps Min)  
PIN No.  
Definition  
TOP VIEW  
1
2
3
• Secure power connector screws to monitor.  
• Power should not be applied until all cables are attached and the  
monitor is ready to operate.  
1
2
3
AC Line Input  
AC Neutral Return  
Protective Earth Ground  
ADC P.N. ATM-AC-CON or  
PHOENIX CONTACT P.N. 1777992  
WARNING: Damage can occur if power is not properly connected.  
Plug Retention Screws  
6. Apply Power to the Monitor & PC  
FRONT VIEW  
Power  
Connection  
Label  
L N  
• Press the DISPLAY POWER button on the rear of the monitor to wake the  
monitor up. Pressing the DISPLAY POWER button again turns off the  
backlight inverter and puts the monitor in a reduced power state but  
the touch screen remains active. It is important to note that this switch  
does not disconnect power from the monitor. Power is always supplied  
to the internal AC/DC power supply, which in turn continually supplies  
power to the internal monitor electronics and the optional touch screen  
controller.  
PE  
LCD Power Button:  
7. Install the Appropriate Touch Screen Driver  
• Applies to ATM1900T touch screen version only.  
Power  
Indicator  
• Insert the Documentation and Driver CD into the host PC’s CD drive.  
• If the CD does not start automatically with the window shown below  
displayed, then go to Start > Run, browse to the CD’s “atlas.exe” file,  
open it, and click OK.  
Display Power  
Button  
DISPLAY POWER  
• From the Atlas screen, the user can view the Hardware User’s Guide for  
the monitor being used, and/or install the touch screen drivers for the  
particular PC operating system being used. Before installing the drivers,  
please read the Touch Screen Driver Documentation for operating  
system details.  
WARNING  
Touch Screen is still  
active while display  
power is off  
• Reboot the PC and restart the monitor to activate the driver.  
WARNING: The monitor does not automatically select a video input  
mode. The user must press the “UP (VGA/DVI)” button on the rear  
of the monitor to select either VGA or DVI input. If a “No Video”  
message appears on the screen, it is also suggested the user try using  
the “UP (VGA/DVI)” button to select the active video input.  
NOTE: ONCE YOU HAVE CONNECTED YOUR PC AND THE MONITOR,  
SELECTED THE VIDEO SOURCE, AND POWERED BOTH UNITS, IT IS  
SUGGESTED THAT THE “SELECT (AUTO ADJ)” BUTTON ON THE REAR  
OF THE MONITOR BE PRESSED TO MAXIMIZE THE VIDEO SETTINGS.  
OSD Settings Main Menu:  
8. Verify Video and Touch Screen Functionality  
• Verify the monitor’s video display by running a familiar program.  
• If using the touch screen model (ATM1900T), use the touch screen to  
navigate by running a familiar program.  
M A I N M E N U  
B R I G H T N E S S / C O N T R A S T  
R G B  
C O L O R  
P O S I T I O N  
S E T U P  
E X I T  
9. Adjust the Monitor OSD Settings as Required  
• Press the Select (Auto Adj) control button on the rear of the panel to  
initiate an automatic configuration of the screen.  
1 2 8 0 X 1 0 2 4  
6 3 . 9 K H Z / 6 0 H Z  
Additional Help and Support  
• Although normally not needed, the control buttons on the rear of panel  
can be used to make other adjustments to the screen.  
• Consult the Hardware User’s Guide, ATM-19-USER, on the supplied  
Documentation and Drive CD for detailed usage of the OSD settings.  
• For product support, specifications, installation, and  
troubleshooting, a Hardware User’s Guide, ATM-19-  
USER, is included on the supplied Documentation  
and Driver CD, or downloadable from the Online  
Documentation area of the AutomationDirect Web site.  
• For additional technical support and questions, call our Technical  
Support team 770-844-4200.  
10. Installation Complete  
Download from Www.Somanuals.co3m. All Manuals Search And Download.  
Accessories & Replacement Parts:  
Part Number  
Description  
10 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.  
25 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.  
50 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.  
ATM-CBL-VGA10  
ATM-CBL-VGA25  
ATM-CBL-VGA50  
6 ft. (2 meter) DVI (type D) video cable. Connects M1700 and M1900 to a standard DVI-D port. DVI  
cables provide a higher bandwidth video interface than the VGA cables.  
ATM-CBL-DV2M  
ATM-CBL-DV3M  
ATM-CBL-10  
ATM-CBL-50  
USB-CBL-AB6  
10 ft. (3 meter) DVI (type D) video cable. Connects M1700 and M1900 to a standard DVI-D port.  
DVI cables provide a higher bandwidth video interface than the VGA cables.  
10 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.  
25 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.  
50 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.  
ATM-CBL-10  
ATM-CBL-25  
ATM-CBL-50  
USB-CBL-AB3  
USB-CBL-AB6  
USB-CBL-AB10  
USB-CBL-AB15  
ATM-AC-CON  
ATM-CLIP  
ATM-CBL-25  
3-ft (0.9 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all  
USB devices.  
6-ft (1.8 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all  
USB devices.  
10-ft (3 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all  
USB devices.  
15-ft (4.6 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all  
USB devices.  
Replacement Power Wiring Connector for AC Powered Units.  
Replacement flat panel mounting clip kit. Package of 16 clips and screws.  
USB-CBL-AB3  
ATM-CBL-VGA10  
USB-CBL-AB10  
ATM-CBL-VGA25  
USB-CBL-AB15  
ATM-CBL-VGA50  
ATM-AC-CON  
ATM-CBL-DV2M  
ATM-CLIP  
Quick Installation Guide: ATM-19-QIG, Rev. B  
ATM-CBL-DV3M  
Copyright 2007, Automationdirect.com Incorporated/All Rights Reserved Worldwide  
Download from Www.Somanuals.co4m. All Manuals Search And Download.  

Acu Rite Weather Radio 8575 User Manual
Addonics Technologies Computer Hardware ADPEXC User Manual
Agilent Technologies Portable Generator E8257D PSG User Manual
Aiphone Telephone MC 3 User Manual
Alpine Car Stereo System CVA 1003 User Manual
Alto Shaam Food Warmer HN2 72 User Manual
Amana Microwave Oven ACM1460A User Manual
Apple Network Router MD031 User Manual
ATN Binoculars ATN 7X50 User Manual
Beko Oven OIE22500XP User Manual