WebShare 241
ROUTER ADSL2+
A02-RA241
MULTILANGUAGE
QUICK START GUIDE
A02-RA241_GX01
Where solutions begin
Company certified ISO 9001:2000
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
Questo prodotto è coperto da garanzia Atlantis Land
Fast
Swap della durata di 3 anni. Per maggiori dettagli in merito o
per accedere alla documentazione completa in Italiano fare
riferimento al sito www.atlantis-land.com.
ENGLISH
This product is covered by Atlantis Land 3 years Fast Swap
warranty. For more detailed informations please refer to the web
For more detailed instructions on configuring and using this
device, please refer to the online manual.
FRANCAIS
Ce produit est couvert par une garantie Atlantis Land
Fast
Swap de 3 ans. Pour des informations plus détaillées, référez-
vous svp au site Web www.atlantis-land.com.
DEUTSCH
Dieses Produkt ist durch die Atlantis Land 3 Jahre Fast Swap
Garantie gedeckt. Für weitere Informationen, beziehen Sie sich
bitte auf Web Site www.atlantis-land.com.
ESPAÑOL
Este producto està cubierto de garantía Atlantis Land Fast Swap
por 3 años. Para una información más detallada, se refiera por
favor al Web site www.atlantis-land.com.
Where solutions begin
Company certified ISO 9001:2000
Download from Www.Somanuals.com. All Manuals Search And Download.
The award of the information is facultative, but its lack will
prevent ATLANTIS LAND® from starting the Guarantee process
requested.
Register your product!
Register your product!
Register your product!
Registration on the web
site
www.atlantis-land.com within 15 days
from the purchase of the product dismiss
the customer from showing a valid proof of
purchase (Sale Receipt or Invoice) in case
of the request of intervention. For further
information we invite you to look at our web
site at the section WARRANTY.
Copyright
The Atlantis Land logo is a registered trademark of Atlantis Land
SpA. All other names mentioned mat be trademarks or
registered trademarks of their respective owners. Subject to
change without notice. No liability for technical errors and/or
omissions.
Where solutions begin
Company certified ISO 9001:2000
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTILANGUAGE QUICK START GUIDE
ITALIANO
1.1 Contenuto della confezione ...............................9
1.2 I LED frontali.........................................................9
1.3 Le porte posteriori..............................................10
1.4 Cablaggio............................................................11
1.5 Settaggi di Default .............................................12
1.6 Configurazione di IE..........................................12
1.7 Configurazione del PC......................................13
Configurazione del PC in Windows 95/98/ME .......13
Configurazione del PC in Windows NT4.0.............13
Configurazione del PC in Windows 2000..............14
Configurazione del PC in Windows XP.................14
1.8 Configurazione Router......................................16
PPPoE routed/PPPoA routed ................................19
RFC1483 routed / IpoA routed...............................21
ENGLISH
1.1 Package contents..............................................24
1.2 The Front Panel LEDs ......................................25
1.3 The Rear Ports...................................................26
1.4 Cabling ................................................................27
1.5 Default Settings..................................................27
1.6 IE Configuration .................................................28
1.7 TCP/IP Configuration........................................28
Configuring PC (Windows 95/98/ME) ....................28
Configuring PC (Windows NT4.0)........................29
Configuring PC (Windows 2000)...........................29
Configuring PC (WindowsXP)..............................30
1.8 Browser configuration .......................................32
PPPoE routed/PPPoA routed ................................34
RFC1483 routed / IpoA routed...............................36
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTILANGUAGE QUICK START GUIDE
FRANCAIS
1.1 Contenu de la boîte...........................................38
1.2 Face avant..........................................................39
1.3 Face arrière ........................................................40
1.4 Câblage...............................................................41
1.5 Configuration initiale..........................................41
1.6 Configuration du TCP/IP...................................42
Configuration sous Windows 95/98/ME .................42
Configuration sous Windows NT4.0.......................42
Configuration sous Windows 2000 ......................43
Configuration sous Windows XP..........................43
1.7 Vérification..........................................................45
1.8 Configuration avec le Browser.........................46
PPPoE Routed /PPPoA Routed.............................49
RFC1483 routed / IpoA routed...............................51
DEUTSCH
1.1 Inhalt der Verpackung.......................................53
1.2 Die frontalen LED ..............................................53
1.3 Die Hinterturen...................................................54
1.4 Verdrahtung........................................................55
1.5 Einstellung des Default.....................................55
1.6 Die IE Konfiguration ..........................................56
1.7 Konfiguration des PC........................................56
Konfiguration des PC in Windows 95/98/ME .........56
Konfiguration des PC in Windows NT4.0...............57
Konfiguration des PC in Windows 2000................57
Konfiguration des PC in Windows XP....................58
1.8 Konfiguration des Router..................................61
PPPoE routed/PPPoA routed ................................63
RFC1483 routed / IpoA routed...............................65
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTILANGUAGE QUICK START GUIDE
ESPANOL
1.1 Contenido de la caja .........................................67
1.2 Los LED frontales..............................................67
1.3 Las puertas posteriores....................................68
1.4 Cablaje ................................................................69
1.5 Configuraciones por Defecto ...........................70
1.6 Configuracciòn de IE.........................................70
1.7 Configuracciòn del PC......................................71
Configuracciòn del PC en Windows 95/98/ME ......71
Configuración del PC en Windows NT4.0..............71
Configuración del PC en Windows 2000...............72
Configuración del PC en Windows XP..................72
1.8 Configuracciòn Router......................................73
PPPoE routed/PPPoA routed ................................75
RFC1483 routed / IpoA routed...............................77
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTILANGUAGE QUICK START GUIDE
A02-RA241_GX01(V1.0 December 2005)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
Questo manuale è inteso come una guida rapida,
pertanto per ulteriori dettagli sulla configurazione fare
riferimento alla presentazione multimediale interattiva o
al manuale esteso presenti sul CDRom allegato.
1.1 Contenuto della confezione
Atlantis Land WebShare 241 Router ADSL2+, CD-Rom
contenente il manuale e la guida interattiva, Guida di Quick
Start, cavo RJ-11 ADSL, cavo CAT-5 LAN , Alimentatore
(12V, 1A).
1.2 I LED frontali
LED
INFORMAZIONE
Acceso quando connesso alla rete elettrica.
PWR
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
Acceso verde fisso quando il sistema è
pronto.
Acceso quando connesso ad un dispositivo
Ethernet
Verde= connessione a 100Mbps
Arancio= connessione a 10Mbps
SYS
LAN
Lampeggiante
quando
vi
è
trasmissione/ricezione.
Acceso quando connesso in modalità ADSL
DSLAM. Lampeggiante durante la fase di
allineamento.
Acceso verde fisso quando è attiva una
sessione PPP.
ADSL
PPP
1.3 Le porte posteriori
PORTE
UTILIZZO
Connettere il cavo RJ-11 a questa
porta per effettuare l’allacciamento
all’ADSL.
ADSL(RJ11)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
Connettere con un cavo UTP.
LAN(RJ-45)
Reset
Dopo che il dispositivo è acceso,
premere per effettuare il reset sino a
che il lampeggio intermittente dei
LED anteriori si esaurisce. Effettuare
a questo punto un riavvio del
dispositivo (tramite il tasto Power
On/Off).
Connettere l’alimentatore a questo
jack.
POWER (jack)
1.4 Cablaggio
Anzitutto collegare il prodotto alla linea ADSL tramite il cavo
RJ11 fornito in dotazione (nella porta ADSL), poi collegare
alle porte RJ45 i PC della Lan oppure eventuali Switch.
Infine una volta controllati tutti i collegamenti terminare il
cablaggio collegando l’alimentatore prima al WebShare 241
Router ADSL2+ e poi alla presa elettrica. il prodotto
effettuerà immediatamente una diagnostica (circa 60
secondi). Terminata questa fase i Led PWR, SYS
(eventualmente anche i Led LAN, se connessi a PC)
saranno accesi verdi fissi. Il Led ADSL, se opportunamente
collegato, inizialmente lampeggerà, durante la fase di
allineamento e poi diventerà fisso, una volta allineatosi
(condizione indispensabile per la navigazione Internet).
Poiché l’ADSL ed il normale servizio telefonico condividono
(spesso) lo stesso filo per trasportare i rispettivi segnali è
necessario, al fine di evitare interferenze dannose, dividere
tramite un apposito filtro i 2 segnali. Tale filtro passa basso
permetterà di estrarre la porzione di spettro utilizzata dal
servizio telefonico impedendo così che la qualità di questo
sia compromessa dalle alte frequenze introdotte dal segnale
dell’ADSL. E’ necessario pertanto utilizzare un filtro per ogni
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
presa su cui è collegato un telefono analogico. Esistono
opportuni filtri che dispongono di 2 uscite (una PSTN ed una
ADSL) e consentono di utilizzare sulla stessa presa sia un
telefono analogico che il WebShare 241 Router ADSL2+.
Tale filtro non è incluso nella confezione e va acquistato
separatamente. Atlantis Land raccomanda di utilizzare
apparati certificati per il tipo di linee e consiglia la scelta dei
codici A01-AF1 (filtro ADSL tripolare su specifiche Telecom
Italia) o A01-AF2.
1.5 Settaggi di Default
Prima di iniziare la configurazione dell’Atlantis WebShare
241 Router ADSL2+ è necessario conoscere quali siano i
settaggi di default. Lasciando questi settaggi e impostando i
PC come client DHCP (come da istruzioni seguenti) ed
infine configurando la connessione all’ISP (che avrà
comunicato tutti i parametri del caso) è possibile utilizzare
l’Atlantis WebShare 241 Router ADSL2+ in pochissimo
tempo. Per una configurazione più dettagliata fare
riferimento al manuale presente sul CD. Le configurazioni di
Default dell’Atlantis WebShare 241 Router ADSL2+ sono:
• Username:admin
• Password: atlantis
• Indirizzo IP: (192.168.1.254), Subnet Mask
(255.255.255.0)
• DHCP Server: abilitato
1.6 Configurazione di IE
A questo punto è necessario lanciare IE, andare nel menù
strumenti, poi scegliere la sezione Connessioni e spuntare
una delle seguenti voci:
• Non utilizzare mai connessioni remote
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
• Usa connessione remota se non è disponibile una
connessione di rete
1.7 Configurazione del PC
Configurazione del PC in Windows 95/98/ME
1. Andare in Start/Settings/Control Panel. Cliccare 2
volte su Network e scegliere Configuration.
2. Selezionare TCP/IP->NIC F/E, o qualsiasi Network
Interface Card (NIC) del PC.
3. Cliccare su Properties.
4. Selezionare l’opzione Obtain an IP address
automatically (dopo aver scelto IP Address).
5. Andare su DNS Configuration.
6. Selezionare l’opzione Disable DNS e premere su OK
per terminare la configurazione.
Riavviare il PC affinché i cambiamenti abbiano effetto.
Configurazione del PC in Windows NT4.0
1. Andare su Start/Settings/ Control Panel. Cliccare per
due volte su Network e poi cliccare su Protocols .
2. Selezionare TCP/IP Protocol e poi cliccare su
Properties.
3. Selezionare l’opzione Obtain an IP address from a
DHCP server e premere OK.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
Configurazione del PC in Windows 2000
1. Andare su Start/Settings/Control Panel. Cliccare due
volte su Network and Dial-up Connections.
2. Cliccare due volte su Local Area Connection.
3. In Local Area Connection Status cliccare Properties.
4. Selezionare Internet Protocol (TCP/IP) e cliccare su
Properties.
5. Selezionare l’opzione Obtain an IP address
automatically e successivamente Obtain DNS server
address automatically.
6. Premere su OK per terminare la configurazione.
Configurazione del PC in Windows XP
1. Andare su Start e poi Control Panel. Cliccare due
volte su Network (in Classic View) Connections.
2. Cliccare due volte su Local Area Connection.
3. In Local Area Connection Status cliccare Properties.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
4. Selezionare Internet Protocol (TCP/IP) e cliccare su
Properties.
5. Selezionare l’opzione Obtain an IP address
automatically e successivamente Obtain DNS server
address automatically.
6. Premere su OK per terminare la configurazione.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
1.8 Configurazione Router
Digitare nel browser web il seguente indirizzo IP:
http://192.168.1.254 e premere il tasto invio.
Utilizzare admin (come nome utente) e atlantis (come
password). Premere OK per continuare.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
Apparirà a questo punto il Menù Principale, nella cui parte
sinistra è possibile accedere (come se si stessero vedendo i
links in una homepage) a tutte le sezioni disponibili:
• Status (ARP Table, Routing Table, DHCP Table,
System Log, Security Log)
• Quick Start
• Configuration (LAN, WAN, System, Firewall, QoS,
Virtual Server, Advanced)
• Save Config
Cliccando sulla sezione desiderata, nello spazio della
homepage appariranno tutti i settaggi relativi alla
configurazione della sezione scelta, oppure si apriranno
tutta una serie di sottosezioni tra cui scegliere prima di
avere accesso alle configurazione vere e proprie.
Seguendo i successivi passi è possibile rendere operativo il
WebShare 241 Router ADSL2+ in pochissimo tempo a
patto di usare le macchine della Lan configurate come client
DHCP. Al solito per una configurazione personalizzata della
Lan e del Router fare riferimento al manuale presente sul
CD.
Cliccare su Configuration, WAN e poi ISP (Change).
Apparirà la seguente immagine in cui è possibile scegliere il
protocollo utilizzato dall’ADSL.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
Prima di iniziare la configurazione della parte WAN del
WebShare 241 Router ADSL2+ è opportuno conoscere il
protocollo utilizzato dall’ISP (PPPoE, PPPoA, RFC1483
Routed) per veicolare l’ADSL.
E’ opportuno considerare, qualora non si abbiano dati
dettagliati sul tipo di ADSL fornita dall’ISP (è comunque
condizione necessaria) che l’username e password sono
utilizzate dai soli protocolli PPPoA e PPPoE, mentre se l’ISP
ha assegnato solo un indirizzo IP statico (oltre ad un Default
Gateway) è molto probabile che il protocollo usato sia l’RFC
1483 Routed.
Una volta scelto il protocollo ADSL utilizzato dall’ISP cliccare
su Next per inserire i parametri.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
PPPoE routed/PPPoA routed
PPPoE/PPPoA sono connessioni ADSL conosciute come
dial-up DSL. Sono state concepite per integrare servizi a
banda larga con un’attenzione particolare alla facilità di
configurazione. L’utente può beneficiare di una grande
velocità di accesso senza cambiare l’idea di funzionamento,
condividere lo stesso account con l’ISP.
Controllare che i parametri siano come in figura:
• VPI: 8 (se non diversamente specificato dall’ISP)
• VCI: 35 (se non diversamente specificato dall’ISP)
• NAT:Enable
• Username: Introdurre l’username fornita dall’ISP (case
sensitive).
• Password: Introdurre la password fornita dall’ISP (case
sensitive).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
• Service Name (solo in PPPoe): introdurre solo se
espressamente richiesto dall’ISP.
• IP Adress: 0.0.0.0
• Authentication Protocol: Auto
• Connection: Scegliere Always On per mantenere attiva
sempre la sessione PPPoE/PPPoA. Scegliere Connect
On-Demand (solo in PPPoE) per far costruire la
connessione solo in caso di traffico.
• Idle-Timeout:
Il
dispositivo
disconnette
automaticamente la connessione ADSL quando non
rileva alcuna attività di pacchetti verso Internet per un
tempo predeterminato. Il valore può essere settato in
minuti.
• RIP: No RIP
• MTU: 1500(PPPoA), 1492(PPPoE)
• PPPoE Relay:
Premere su Apply per terminare.
Il Led ADSL prima lampeggerà e poi diventerà fisso
indicando l’avvenuto allineamento. Successivamente il led
PPP dovrebbe diventare fisso. A questo punto è possibile
cominciare la navigazione, accedendo invece alla sezione
Status del dispositivo è possibile controllare i dettagli della
connessione PPP. Per ogni altro problema si invita alla
consultazione del manuale completo o guida rapida
multimediale presenti sul CDRom allegato al prodotto.
Cliccare Save Config to Flash per rendere permanente la
configurazione.
Si ricorda che tale dispositivo non è adatto a
gestire abbonamenti non FLAT o a consumo.
Atlantis Land non potrà essere ritenuta
responsabile per qualsiai problematica
derivante
dall’utilizzo di abbonamenti a
20
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
consumo (non FLAT) o da una errata
configurazione dell’apparato. In caso di
dubbio
contattare
preventivamente
l’assistenza tecnica.
RFC1483 routed / IpoA routed
Controllare che i parametri siano come in figura:
• VPI:8 (se non diversamente specificato dall’ISP)
• VCI:35 (se non diversamente specificato dall’ISP)
• NAT:Enable
• Encapsulation: Scegliere l’incapsulamento 1483
Routed IP LLC (più raramente 1483 Routed VC-Mux) in
caso di RFC 1483.
Scegliere Use the Following IP address ed introdurre:
• IP Adress:Introdurre l’indirizzo IP fornito dall’ISP
• Subnet Mask: Introdurre la subnet mask fornita dall’ISP
• Gateway:Introdurre l’indirizzo IP del default Gateway
fornito dall’ISP
• RIP: No Rip
21
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
Premere Apply per terminare.
Il Led ADSL prima lampeggerà e poi diventerà fisso
indicando l’avvenuto allineamento. A questo punto
accedendo alla sezione Status è possibile controllare
l’avvenuta connessione e quindi cominciare la navigazione.
Per ogni altro problema si invita alla consultazione del
manuale completo o guida rapida multimediale presenti sul
CDRom allegato al prodotto. Cliccare Save Config to Flash
per rendere permanente la configurazione.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
For more detailed instructions on configuring and using
the WebShare 241 Router ADSL2+, please refer to the
online manual.
Before beginning the configuration of the Router you have to
know the parameters of your subscription ADSL.
There are four ways PPPoE, PPPoA, RFC1483 routed,
RFC1483 Bridge for the device to have a public IP address
and then to access Internet. You have to check with your
ISP about which way is adopted.
VPI/VCI: Consult the telephone company to get the Virtual
Path Identifier (VPI) and Virtual Channel Identifier (VCI)
numbers. The valid range for the VPI is 0 to 255 and for the
VCI is 32 to 65535. The default value VPI is 0 and VCI is 32.
For BT (VPI=0, VCI=38) and for KC (VPI=1, VCI=50).
NAT: The NAT feature allows multiple-user Internet access
for the cost of a single IP account. If you need to have a
public server or a public network, NAT has to be disabled.
Encapsulation Method: Be sure to use the encapsulation
method (LLC/SNAP or VC MUX) required by your ISP.
Gather the information as illustrated in the following table
and keep it for reference.
VPI and VCI
PPPoE
VC-based / LLC-based multiplexing
Username and Password
Service Name
VPI and VCI
VC-based / LLC-based multiplexing
PPPoA
Username and Password
VPI/VCI
RFC1483
Bridged
VC-based / LLC-based multiplexing
23
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
VPI/VCI
RFC1483
Routed
VC-based / LLC-based multiplexing
IP address
Subnet mask
Default Gateway (IP address)
IP address (DNS)
VPI/VCI
IPoA
IP address
Subnet mask
Default Gateway (IP address)
IP address (DNS)
1.1 Package contents
Atlantis Land WebShare 241 Router ADSL2+, CD-Rom with
manual, Quick Start Guide, cable RJ-11 ADSL, cable CAT-
5 LAN, Power Adapter AC-DC (12V, 1A).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
1.2 The Front Panel LEDs
LED
PWR
SYS
MEANING
Lit when power ON.
Lit steady when system is ready.
Lit when connected to Ethernet device
Green for 100Mbps; Orange for 10Mbps
Blinking when data transmit/received.
LAN
Lit when successfully connected to an
ADSL DSLAM.
ADSL
PPP
Lit steady when there is a PPPoA /
PPPoE connection.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
1.3 The Rear Ports
PORT
MEANING
Connect the supplied RJ-11 cable to
this port when connecting to the
ADSL/telephone network.
Line (RJ11)
Connect an UTP Ethernet cable to
one of the four LAN ports when
connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
LAN( RJ-45)
Reset
After the device has turned on, press
it to reset the device or restore to
factory default settings. Hold the
button in until all lights on the modem
flash and it reboots with factory
default settings. Please Switch off
device and after Switch on again.
Connect the supplied power adapter
POWER (jack)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
to this jack.
1.4 Cabling
First you must connect the product to the ADSL line through
the RJ11 cable you have in equipment (in the port ADSL),
then connect to the RJ45 ports the PCs of your Lan or
others Switch. In the end. Once you’ve checked all the
connections, connect the AC Adapter to the WebShare 241
Router ADSL2+ and then to the socket. The product will
carry on immediately a diagnosis (60 seconds). Finished this
the Led PWR, SYS (eventually even the Led LAN, if
connected to PCs) will be fixed green. The Led ADSL, if
suitably connected, at first will be flashing and then it will
remain fixed.
1.5 Default Settings
The WebShare 241 Router ADSL2+ can be configured with
your Web browser. The web browser is included as a
standard application in following operation systems, UNIX,
Linux, Mac OS, Windows 95/98/NT/2000/Me, etc. The
product provides a very easy and user-friendly interface for
configuration.
Before Configuration
This section describes the configuration required by LAN-
attached PCs that communicate with the WebShare 241
Router ADSL2+, either to configure the device, or for
network access. These PCs must have an Ethernet interface
installed properly, be connected to the WebShare 241
Router ADSL2+
either directly or through an external
Switch, and have TCP/IP installed and configured to obtain
an IP address through a DHCP server or a fixed IP address
that must be in the same subnet of the WebShare 241
Router ADSL2+. The default IP address of the WebShare
241 Router ADSL2+ is 192.168.1.254 and subnet mask is
27
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
255.255.255.0. The best and easy way is to configure the
PC to get an IP address from the WebShare 241 Router
ADSL2+ (DHCP client).
Please follow the steps below for PC’s network environment
installation. First of all, please check your PC’s network
components. The TCP/IP protocol stack and Ethernet
network adapter must be installed. If not, please refer to MS
Windows relative manuals.
Before you configure this WebShare 241 ADSL Router2+,
you need to know the following default settings:
• Username:admin
• Password:atlantis
• IP address (192.168.1.254), Subnet Mask
(255.255.255.0)
• DHCP Server: enable
1.6 IE Configuration
Now open IE, go to Instruments menu, select the
Connections tab and select one of the following options:
• Never use remote connection
• Use remote connection if another network
connection isn’t available
1.7 TCP/IP Configuration
Configuring PC (Windows 95/98/ME)
1.
Go to Start / Settings / Control Panel. In the Control
Panel, double-click on Network and choose the
Configuration tab.
2.
Select TCP / IP -> NIC Compatible, or the name of
any Network Interface Card (NIC) in your PC.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
3.
4.
Click Properties.
Select the IP Address tab. In this page, click the
Obtain an IP address automatically radio button.
5.
6.
Then select the DNS Configuration tab.
Select the Disable DNS radio button and click “OK”
to finish the configuration.
Configuring PC (Windows NT4.0)
1.
Go to Start / Settings / Control Panel. In the Control
Panel, double-click on Network and choose the
Protocols tab.
2.
3.
Select TCP/IP Protocol and click Properties.
Select the Obtain an IP address from a DHCP
server radio button and click OK.
Configuring PC (Windows 2000)
1.
Go to Start / Settings / Control Panel. In the Control
Panel, double-click on Network and Dial-up
Connections.
2.
3.
Double-click LAN Area Connection.
In the LAN Area Connection Status window, click
Properties.
4.
Select Internet Protocol (TCP/IP) and click
Properties.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Select the Obtain an IP address automatically and
the Obtain DNS server address automatically radio
buttons.
5.
6.
Click OK to finish the configuration.
Configuring PC (WindowsXP)
1.
Go to Start / Control Panel (in Classic View). In the
Control Panel, double-click on Network Connections.
2.
Double-click Local Area Connection.
3.
In the LAN Area Connection Status window, click
Properties.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
4.
5.
Select Internet Protocol (TCP/IP) and click
Properties.
Select the Obtain an IP address automatically and
the Obtain DNS server address automatically radio
buttons.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
6.
Click OK to finish the configuration
1.8 Browser configuration
Open the web browser, enter the local port IP address of this
WebShare 241 Router ADSL2+, which default at
192.168.1.254, and click “Go” to get the login page.
The default username is admin, password atlantis and click
“OK” to continue.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
At the configuration homepage, the left navigation pane
where bookmarks are provided links you directly to the
desired setup page, including:
• Status (ARP Table, Routing Table, DHCP Table,
System Log, Security Log)
• Quick Start
• Configuration (WAN, LAN, System, Firewall, QoS,
Virtual Server, Advanced)
• Save Config
Click on the desired item to expand the page with all
settings in the main navigation pane.
Following next steps you can make operating WebShare
241 Router ADSL2+ in short time using PCs in DHCP
mode. Refer to manual on Installation CD if you need
personalized configuration.
Click on Configuration, WAN, then ISP (Change) to chose
the protocol selection.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Click on Next to continue.
PPPoE routed/PPPoA routed
PPPoA/PPPoE is known as a dial-up DSL or cable service.
It is designed to integrate the broadband services into the
current widely deployed, easy-to-use, and low-cost dial-up-
access networking infrastructure. Therefore, users can get
greater access speed without changing the operation
concept, sharing the same ISP account and paying for one
access account.
These are configuration parameters:
34
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
• Virtual Circuit: Enable
• VPI: 0 or 1 (check with your ISP)
• VCI: 38 or 50 (check with your ISP)
• NAT: Enable
• Username: Enter the username provided by your
ISP(case sensitive).
• Password: Enter the password provided by your ISP
(case sensitive).
• Service Name: This item is for identification purposes. If
it is required, your ISP will provide you the information.
• IP Adress:0.0.0.0
• Authentication Protocol Type: Default is Chap (Auto).
Your ISP will advise you whether to use Chap or Pap.
• Connection: Chose Always On If you want the router
to establish a PPPoE/A session when starting up and to
automatically re-establish the PPPoE/A session when
disconnected by the ISP. Chose Connect on Demand If
you want to establish a PPPoE session only when there
is a packet requesting access to the Internet.
• Idel Timeout: Auto-disconnect the Router when there is
no activity on the line for a predetermined period of time.
• RIP: No Rip
• MTU: 1492 (PPPoE), 1500(PPPoA)
Press Apply and then click on Save Config to Flash.
Now You can check on the section Status if connection is
up and You can begin navigation. For every other problem
refer to Manual or Multimedia Guide on attached cd-rom.
You have to pay particular attention to the
WAN-ADSL connection. If you have any
doubt turn to qualified personnel or contact
Atlantis-Land technical assistance. Atlantis
Land will not be considered responsible in
case of wrong or bad configuration.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
RFC1483 routed / IpoA routed
These are configuration parameters:
• VPI: 0 or 1 (check with your ISP)
• VCI: 38 or 50 (check with your ISP)
• NAT:Enable
• Encapsulation: please use LLC Routed. If You have
problem You have to check with your ISP about which
Encapsulation Method is adopted.
Select Use the following IP address
• IP Adress: Insert your Public IP
• Subnet Mask: Insert Netmask provided by ISP
• Gateway: Insert router Default Gateway
Press Apply and then click on Save Config to Flash.
Now You can check on the section Status if connection is
up and You can begin navigation. For every other problem
refer to Manual or Multimedia Guide on attached cd-rom.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
Ce guide d’installation rapide vous permet d’installer et
de configurer le WebShare 241 Router ADSL2+ suivant
des paramètres standards. Pour plus de précisions, tant
sur les méthodes de configuration que sur le
paramétrage avancé, reportez-vous au Manuel sous
format électronique (PDF) ou à la Multimedia Guide
disponible sur le CD Rom fourni.
Avant d’installer votre WebShare 241 Router ADSL2+, vous
devez savoir de quel type d'accès vous disposez et vous
munir d'informations précises concernant votre compte
internet. Si votre fournisseur d'accès Internet (FAI) demande
un Login et un Mot de Passe (c’est parce que vous avez un
compte PPPoE ou PPPoA, par exemple), utilisez le
protocole PPPoA(RFC2364) ou PPPoE(RFC2516). Si vous
avez un adresse IP fixe utilisez le protocole RFC 1483
Routed. Le FAI, dans ce cas, doit vous fournir aussi: Une
Adresse IP Internet, Masque de sous-réseau, Adresse IP du
Default Gateway et Adresses IP du serveur DNS. Le tableau
suivant récapitule les informations dont vous aurez besoin
en fonction du protocole:
VPI et VCI
PPPoE
VC-based ou LLC-based multiplexing
Nom utilisateur (Username) et Mot de
passe (Password)
Nom du Service (Service Name)
VPI et VCI
PPPoA
VC-based ou LLC-based multiplexing
Nom utilisateur (Username) et Mot de
passe (Password)
VPI/VCI
RFC1483
Bridged
VC-based ou LLC-based multiplexing
37
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
VPI/VCI
RFC1483
Routed
VC-based ou LLC-based multiplexing
Adresse IP
Masque de sous-réseau
Adresse IP du Default Gateway
Adresses IP des serveurs DNS
VPI/VCI
IPoA
VC-based ou LLC-based multiplexing
Adresse IP
Masque de sous-réseau
Adresse IP du Default Gateway
Adresses IP des serveur DNS
1.1 Contenu de la boîte
Avant l’installation, assurez-vous de disposer des éléments
suivants : WebShare 241 Router ADSL2+, câble réseau
(CAT5), câble RJ11, adaptateur secteur (12V/1A), CD-Rom
avec manuels et logiciels (firmware), guide à l'installation.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
1.2 Face avant
LED
PWR
SYS
SIGNIFICATION
Allumé quand le WebShare 241 Router
ADSL2+ est sous tension.
Allumé pour indiquer que le système est
actif.
Allumé quand le LAN (réseau) est connecté
Vert= connexion à 100Mbps
Orange= connexion à 10Mbps
LAN
Il clignote lors des transferts de données.
Si allumé fixe vert il indique une connexion
correcte, s'il clignote il est en train de se
connecter.
ADSL
PPP
Allumé fixe quand il y a une connexion
PPPoE / PPPoA.
Il clignote quand il est en train de de
39
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
construire une connexion PPP.
1.3 Face arrière
PORT
USAGE
Connectez le câble (fourni) RJ11 au
filtre ADSL (optionnel) et enfin à la
prise téléphonique.
ADSL(RJ11)
Relier directement avec un câble
Ethernet standard ou croisé aux PC ou
à un port uplink (Hub/Switch).
LAN (RJ-45)
Dispositif allumé, presser pour effectuer
le reset ou le restore. Pressez le reset
jusqu’à les LEDs n'arrêtent pas de
Reset
(remise à zéro)
clignoter, à ce stade
éteindre et
reallumer le dispositif.
Connectez l’alimentation fournie à cette
prise.
POWER (jack)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
1.4 Câblage
Après avoir terminé le câblage, raccordez l’alimentation pour
mettre le WebShare 241 Router ADSL2+ sous tension.
Assurez-vous que les LEDs sont correctement allumés.
Connectez un câble réseau standard ou croisé pour relier le
Router à un Hub/Switch ou aux PC. Une fois toutes les
liaisons effectuées le WebShare 241 Router ADSL2+
effectuera un diagnostique (d'une soixantaine de secondes).
Quand cette étape sera terminée les LED PWR,SYS (LAN si
est connectée) seront fixes, ce qui signifie que le produit
fonctionne correctement. Enfin, la Led ADSL clignotera en
vert pour indiquer la phase d’alignement et deviendra fixe
par la suite (condition indispensable pour naviguer sur
Internet).
1.5 Configuration initiale
Avant de commencer la configuration du WebShare 241
Router ADSL2+
il est nécessaire de connaître la
configuration initiale (paramètres par défaut).
Pour pouvoir utiliser le WebShare 241 Router ADSL2+ en
peu de temps, il suffit de garder la configuration par défaut,
de mettre les PC en client DHCP et de configurer l’accès
Internet (avec les données fournies par le FAI). Pour une
configuration plus détaillée faire référence au manuel
complet sur le CD-Rom.
La configuration initiale (paramètres par défaut) est:
• User : admin
• Password : atlantis
• Adresse IP (192.168.1.254), Subnet Mask (Masque
de sous réseau)=255.255.255.0
• DHCP (Fonction serveur DHCP) Activée
41
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
1.6 Configuration du TCP/IP
Configuration sous Windows 95/98/ME
1.
Allez dans Panneau de Configuration. Double-
cliquez sur Réseau.et enfin
Configuration.
affichez l’onglet
2.
Sélectionnez
le
protocole
TCP/IP ->
NIC carte, ou quelconque carte réseau Ethernet dans
le PC.
3.
4.
Cliquez sur Propriétés
Dans l’onglet Adresse IP Sélectionnez l’option «
obtenir automatiquement une adresse IP ».
5.
6.
Sélectionnez l’onglet DNS.
Sélectionnez l’option Désactiver DNS et cliquez sur
OK pour terminer la configuration. Vous devez
redémarrer l’ordinateur pour que les changements
prennent effet.
Configuration sous Windows NT4.0
1.
2.
3.
Allez au Panneau de Configuration. Double-cliquez
sur Réseau et enfin sélectionnez l’onglet Protocole .
Sélectionnez TCP/IP Protocol et après cliquez sur
Propriétés.
Sélectionnez (votre carte Réseau) l’onglet Obtenir
une adresse IP par un serveur DHCP et après
cliquez sur OK pour terminer la configuration.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
Configuration sous Windows 2000
1.
Allez au Panneau de Configuration. Double-cliquez
sur Connexions Réseau et accès à distance..
2.
3.
Double-cliquez sur connexion au réseau local.
Dans Connexion au réseau local cliquez sur
Propriétés.
4.
5.
Sélectionnez Internet Protocol (TCP/IP) et cliquez
sur Propriétés.
Sous l’onglet Général, sélectionnez l’onglet Obtenir
une adresse IP automatiquement et après Obtenir
les adresses des serveurs DNS automatiquement
6.
Cliquez sur OK pour terminer la configuration
Configuration sous Windows XP
1.
Allez sur Panneau de Configuration. Double-cliquez
sur Accès Réseau
2.
Double-cliquez sur Connexion au Réseau local.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
3.
Cliquez Propriétés.
4.
5.
Sélectionnez Internet Protocol (TCP/IP) et cliquez
sur Properties.
Sélectionnez
Obtenir
une
adresse
IP
automatiquement et après Obtenir les adresses
des serveurs DNS automatiquement.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
6.
Cliquez sur OK pour terminer la configuration.
1.7 Vérification
Pour vérifier le succès de la configuration (après avoir
redémarré le PC, opération nécessaire sous Win98, SE,
ME) utiliser le PING. Dans la fenêtre Dos écrivez: PING
192.168.1.254.
Si le message suivant apparaît:
Pinging 192.168.1.254 with 32 bytes of date:
Reply from 192.168.1.254: bytes=32 times <10ms
TTL=64
Reply from 192.168.1.254: bytes=32 times <10ms
TTL=64
45
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
Reply from 192.168.1.254: bytes=32 times <10ms
TTL=64
Vous pouvez procéder en allant au point suivant (1.8
Configuration).
Si par contre le message suivant apparaît:
Pinging 192.168.1.254 with 32 bytes of date:
Request timed out.
Request timed out.
Request timed out.
Vérifiez que le Led LAN est bien allumé.
Vérifiez l'adresse de votre PC en écrivant WINIPCFG (pour,
Win95,98,ME) ou IPCONFIG (pour Win2000, XP) et
éventuellement réinstallez le stack TCP/IP.
1.8 Configuration avec le Browser
Pour accéder à l’interface Web, lancez un navigateur
Internet et tapez dans la barre adresse l’IP suivante :
Un mot de passe vous est demandé, pour la première
connexion. Nom d’Utilisateur (User) = admin et Mot de
Passe (Password) = atlantis et appuyez sur OK pour aller
dans la configuration.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
Il apparaîtra à ce point le Menu Principal (pour accéder à
l'interface en français cliquer sur Langage et sélectionner
French).
Dans la partie gauche on pourra accéder, à toutes les
sections:
• Status (Table ARP, Table de Routage, Table
DHCP, Evénements système, Evénements de
sécurité)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
• Démarrage rapide
• Configuration (WAN, LAN, Système, Pare Feu,
QoS, Serveur Virtuel, Avancé)
• Sauvegarde en mémoire
En suivant les indications ci-dessous il est possible de
rendre opérationnel le WebShare 241 Router ADSL2+ en
peu de temps à condition d'utiliser les PC du réseau comme
client DHCP. Pour une configuration personnalisée du
réseau et du Router faire référence au manuel complet dans
le CD Rom.
Vous trouverez dans le tableau ci-dessous les valeurs
possibles de VPI/VCI.
Données à configurer
Valeurs
Virtual Path Identifier
Virtual Circuit Identifier
8
8
2
67
35
32
Attention si ces valeurs sont erronées le modem ne
fonctionnera pas correctement ( une connexion correct
peut se vérifier).
En cas de doutes demandez
confirmation à votre fournisseur d’accès (FAI).
Presser sur Configuration, puis WAN et après FAI
(Changer) pour choisir le type de protocole ADSL.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
PPPoE Routed /PPPoA Routed
Le protocole PPPoE (Point to Point Protocol over Ethernet)
est l’une des méthodes utilisées en France. Il a été conçu
(comme le PPPoA) pour compléter le service ADSL avec
une attention spéciale pour facilité la configuration.
L'utilisateur peut bénéficier d'une grande vitesse d'accès
sans changer la façon de fonctionnement et en même temps
partager entre tous les utilisateurs de votre entreprise un
compte Internet unique (avec le FAI). Ne pas utiliser de
logiciels additionnels. En cas de doute demander les
paramètres de configuration à votre opérateur (FAI).
• VPI: 8 ou 8 ou 2 (contacter le FAI)
• VCI: 67 ou 35 ou 32 (contacter le FAI)
• NAT: Valide(Enable)
• Nom d’Utilisateur (Username): Nom d’utilisateur(case
sensitive).
49
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
• Mot de Passe (Password): Mot de passe (case
sensitive).
• Nom du Service (Service Name): Est un identificateur
peut être demandé par le FAI (seulement avec le
protocol PPPoE).
• Adresse IP (IP Adress):0.0.0.0
• Protocole
d’Authentication
(Authentication
Protocol): (Méthode d’authentification de l’utilisateur :
Auto – PAP – CHAP). Ce choix dépend de votre FAI,
laisser par défaut sur Auto, le routeur se chargera du
choix en fonction de la ligne.
• Connexion (Connection) : Cochez Toujours connecté
(Always On) si vous désirez que votre connexion ADSL
soit toujours active. Cochez Connection à la demende.
(Connect on Demand) (seulement en PPPoE) si vous
désirez que le routeur se déconnecte après une période
d’inactivité.
• Temps avant inactivité (Idle Timeout) : Réglage du
temps, compté en minutes, précédant la déconnexion
automatique.
• RIP: No RIP
• MUT : 1492(PPPoE), 1500(PPPoA)
En pressant Appliquer(Apply), le WebShare 241 Routeur
ADSL2+ fera un reboot automatique [ADSL doit être
Allumée fixe lorsque la session PPPoE/PPPoA est
connectée], votre PC sera prêt pour la navigation. Presser
sur Sauvegarde en mémoire (Save Config to Flash) et
Appliquer pour terminer.
Il faut se rappeler que l’appareil doit être
attentivement configuré (avec un soin spécial
pour la connexion ADSL). En cas de doutes
s’adresser au personnel qualifié ou contacter
50
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
l’assistance technique d‘ Atlantis-Land.
Atlantis Land ne pourra pas être considérée
responsable en cas d’erronée ou mauvaise
configuration de l’appareil. Il ne faut pas
utiliser le dispositif avec des abonnements
non Forfait (non Flat).
RFC1483 routed / IpoA routed
• VPI: 8 ou 8 ou 2 (contacter le FAI)
• VCI: 67 ou 35 ou 32 (contacter le FAI)
• NAT: Valide Enable)
• Méthode d'encapsulation (Encapsulation): LLC
Routed (contacter le FAI).
Cochez Utiliser l’adresse IP suivante et aprés introduisez:
• Adresse IP(Static IP Address)= introduisez l’adresse
IP.
• Masque de sous réseau(Subnet Mask)= introduisez le
masque de sous-réseau.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCAIS
• Passerelle(Gateway)= remplissez les champs suivants
avec les caractéristiques de votre abonnement ADSL
(l’adresse IP du Default Gateway).
• RIP : Invalide (No RIP)
En pressant Appliquer (Apply), le WebShare 241 Routeur
ADSL2+ fera un reboot automatique [ADSL doit être
Allumée fixe], votre PC sera prêt pour la navigation.
Presser sur Sauvegarde en mémoire (Save Config to
Flash) et Appliquer pour terminer.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
Das ist ein Handbuch,das wie eine kurze Anleitung
ausgedacht wird, deshalb nehmen Sie Bezug auf das
vollig Hanbuch, das im CD ist,wenn Sie weitere
Einzelheiten uber die Konfiguration brauchen.
1.1 Inhalt der Verpackung
Atlantis Land WebShare 241 Router ADSL2+, CD-ROM,der
das Handbuch enthalt, Quick Start Anleitung, Kabel RJ-11
ADSL, Kabel CAT-5 LAN , Speiseleitung (12V, 1A).
1.2 Die frontalen LED
LED
PWR
SYS
INFORMATION
Fest
eingeschaltet,wenn es
zum
Elektrizitatsnetz verbunden ist
Es fest eingeschaltet, wenn das System
fertig ist
53
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
Es ist eingeschaltet,wenn es zu einer
Ethernet Vorrichtung verbunden ist
Grun= Verbindung zu 100Mbps
Orangengelb= Verbindung zu 10Mbps
Es blitzt, wenn es Ubersendung/Empfang
gibt.
LAN
Es ist fest eingeschaltet,wenn es in ADSL
DSLAM weise verbunden ist. Es blitzt
wahrend des Ausrichtenzeit.
Es fest eingeschaltet, wenn das PPP fertig
ist
ADSL
PPP
1.3 Die Hinterturen
TUREN
BENUTZUNG
Verbinden Sie den RJ-11 Kabel zu
diesem Tur,um den Anschluss zum
ADSL durchzufuhren.
ADSL(RJ11)
LAN (RJ45)
Verbinden Sie mit einem UTP Kabel.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
Vorrichtung
Nachdem
die
Reset
eingeschaltet ist,drucken Sie auf die
Taste,um der reset oder der restore zu
machen.
Verbinden Sie den Speiser mit diesem
jack.
POWER (jack)
1.4 Verdrahtung
Zunächst müssen Sie das Produkt dem ADSL Linie durch
das gegebenen RJ11 Kabel (in die LINE Tur), verbinden,
dann verbinden Sie die PC Ihrer Lan oder die Switch den
Türen RJ45. Wenn Sie alle Verbindungen kontrolliert haben
und den WebShare 241 Router ADSL2+ eingeschaltet
haben, wird das Produkt sofort eine Diagnose (etwa 60
Sekunden) machen. Wenn diese Phase beendet wird,
werden die Led PWR und SYS (eventuell auch die Led LAN,
wenn sie den PC verbunden sind) fest grün sein. Der ADSL
Led wird blitzen, während der Richtensphase, wenn er
richtig verbunden ist, und dann wird er fest werden,
nachdem er ausgerichtet ist (notwendige Bedingung, um im
Internet zu surfen).
1.5 Einstellung des Default
Bevor Sie die Konfiguration des Atlantis WebShare 241
Router ADSL2+ beginnen,ist es notwendig,dass sie die
Einstellung des Default kennen.
Indem Sie diese Einstellung aufheben und die PC als client
DHCP (wie als die folgende Anleitungen) einstellen und
endlich die Verbindung zum ISP,(das wird alle Parameter
des Falls sagen) darstellen,konnen Sie schnell den Atlantis
WebShare 241 Router ADSL2+ benutzen. Fur eine
eingehende Konfiguration,nehmen Sie Bezug auf den
Handbuch,das im CD findet.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
Die Konfigurationen des Default des Atlantis WebShare 241
Router ADSL2+ sind:
• Username:admin
• Password:atlantis
• Adresse IP (192.168.1.254), Subnet Mask
(255.255.255.0)
• DHCP Server staatlich
1.6 Die IE Konfiguration
Jeztz ist es notwendig,IE einzufuhren, in Menu Instrument
zu gehen, dann der tab Verbindungen wahlen und eine der
folgende Stimmen zu wahlen:
• Benutzen Sie nie remote Verbindung
• Benutzen Sie remote Verbindung, wenn es keine
netz Verbindung disponibel ist.
1.7 Konfiguration des PC
Konfiguration des PC in Windows 95/98/ME
1.
Gehen Sie in Start/Settings/Control Panel. Drucken
Sie zweimal auf Networ und wahlen Sie
Configuration.
2.
Wahlen
Sie
TCP/IP
->
NIC Compatible,oder irgendein Network Interface
Card (NIC) des PC.
3.
4.
Drucken Sie auf Properties.
Wahlen Sie die Option Obtain an IP address
automatically (nachdem Sie IP Address gewahlt
haben).
56
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
5.
6.
Gehen Sie auf DNS Configuration.
Wahlen Sie die Option Disable DNS und drucken Sie
auf OK, um die Konfiguration zu enden.
Leiten Sie wieder den PC,damit die Anderung
geschehen.
Konfiguration des PC in Windows NT4.0
1.
Gehen Sie auf
Start/Settings/ Control Panel.
Drucken Sie zweimal auf Network und dann auf
Protocols .
2.
3.
Wahlen Sie TCP/IP Protocol dann drucken Sie auf
Properties.
Wahlen Sie den Option Obtain an IP address from a
DHCP server und drucken Sie auf OK
Konfiguration des PC in Windows 2000
1.
Gehen Sie auf Start/Settings/Control Panel. Drucken
Sie zweimal auf Network and Dial-up Connections.
2.
3.
Drucken Sie zweimal auf Local Area Connection.
In Local Area Connection Status drucken Sie auf
Properties.
4. Wahlen Sie Internet Protocol (TCP/IP) und drucken
Sie auf Properties.
5.
Wahlen Sie die Option Obtain an IP address
automaticall und spater
Obtain DNS server
address automatically.
6.
Drucken Sie auf OK,um die Konfiguration zu enden.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
Konfiguration des PC in Windows XP
1.
Gehen Sie auf Start dann auf Control
Panel.
Drucken Sie zweimal auf Network (in Classic View)
Connections.
2.
Drucken Sie zweimal auf Local Area Connection.
3.
In Local Area Connection Status drucken Sie auf
Properties.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
4.
5.
Wahlen Sie Internet Protocol (TCP/IP) und drucken
Sie auf Properties.
Wahlen Sie die Option Obtain an IP address
automatically und spater Obtain DNS server
address automatically .
6.
Drucken Sie auf OK,um die Konfiguration zu enden..
59
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
60
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
1.8 Konfiguration des Router
Mit dem browser web, kommen Sie in den folgenden IP
Adresse (wo man den URL steckt)dessen default ist:
192.168.1.254,und drucken Sie die Taste Ubersendung.
Benutzen Sie admin (als user name) und atlantis (als
password). Drucken Sie OK, um weiter zu gehen.
Jeztz wird den Hauptmenu erscheinen,links wird man in alle
Abschnitten:
• Status (ARP Table, Routing Table, DHCP Table,
System Log, Security Log)
• Quick Start
• Configuration (WAN, LAN, System, Firewall, QoS,
Virtual Server, Advanced)
• Save Config
Wenn man auf die gewunschte Abschnitt druckt,wird man
im Raum des Homepage alle Einstellung des gewahlten
61
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
Konfiguration sehen,oder eine Reihe von Abschnitte wird
offnen,und Sie kann unter sie wahlen,bevor Sie in den
wahre Konfigurationen kommen.
Wenn Sie die nachste Schnitten folgen,konnen Sie in kurze
Zeit den WebShare 241 ADSL Lan Router operativ
machen,unter der Bedingung,dass Sie die als client DHCP
eingestellten Lan Maschinen benutzen.Wie ublich,nehmen
Sie Bezug auf den Handbuch im CD fur eine personlich
gemacht Konfiguration.
Drucken Sie auf Configuration, WAN-ISP(Change), Die
automatische Prozedur,um die Verbindung zu wahlen,
erscheinen wird.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
PPPoE routed/PPPoA routed
PPPoE/PPPoA sind ADSL Verbindungen,und sie sind als
dial-up DSL bekannt.Sie sind ausgedacht werden,um
Weitstreifen Verbindungen zu erganzen,.mit einer besonders
Aufmerksamkeit der Leichtigkeit des Konfiguration. Der
Benutzer kann eine grosse Zugriffschnelligkeit geniessen,
ohne die Arbeitsweise zu andern,und derselbe account mit
ISP teilen.
Sehen wir den Parameter,die man darstellen muss:
• VPI: 8 (ISP)
• VCI: 35 (ISP)
• NAT: Enable
• Username: Stecken Sie den von Ihren ISP gegebenen
username (case sensitive).
• Password: Stecken Sie den von Ihren ISP gegebenen
Password (case sensitive).
63
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
• IP Adress:0.0.0.0
• Authentication Protocol: Auto
• Connection : Always On
• Idle Timeout :
• RIP: No RIP
• MUT : 1492(PPPoE), 1500(PPPoA)
Drucken Sie auf Apply, um die neue Konfiguration operativ
zu machen.Wenn Sie die Konfiguration beendet
haben,drucken Sie auf Save Config to Flash,um die
Einstellung dauernd zu machen.
Jetzt,wenn Sie in die Sektion Status kommen, konnen Sie
die geschehene Verbindung kontrollieren und die
Schutzstand
zu
beginnen.Fur
jederen
anderen
Problemen,befragen Sie das vollstandige Handbuch,das
sich anliegend im CDRom befindet.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
RFC1483 routed / IpoA routed
Sehen wir den Paremeter, die man darstellen muss:
• VPI: 8 (ISP)
• VCI: 35 (ISP)
• NAT: Enable
• Encapsulation Method: LLC Routed Wahlen Sie die
Einkapselungmethode Ihres provider.
• IP Adress: Stecken Sie Ihren offentlich IP.
• Subnet Mask: Stecken Sie die von ISP gegebene
Netmask.
• Gateway: Stecken Sie den Default Gateway des Router.
• RIP: No RIP
Drucken Sie auf Apply,um die neue Konfiguration operativ
zu machen.Wenn Sie die Konfiguration beendet
haben,drucken Sie auf Save Config to Flash, um die
Einstellung dauernd zu machen.
Jetzt,wenn Sie in die Sektion Status kommen, konnen Sie
die geschehene Verbindung kontrollieren und die
Schutzstand
zu
beginnen.Fur
jederen
anderen
65
Download from Www.Somanuals.com. All Manuals Search And Download.
DEUTSCH
Problemen,befragen Sie das vollstandige Handbuch,das
sich anliegend im CDRom befindet.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Este manual ha sido creado como guía rápida, para más
detalles relativos a la configuración acude al manual
extenso que está en el CD.
1.1 Contenido de la caja
Atlantis Land WebShare 241 Router ADSL2+, CD-Rom
contenente el manual, Guía rápida, cable RJ-11 ADSL,
cable CAT-5 LAN , Alimentador (12V, 1A).
1.2 Los LED frontales
LED
INFORMACION
El encendido verde fijo cuando está
conectado a la red eléctrica.
PWR
El encendido verde fijo
indica que el
dispositivo ha correctamente efectuado el
cargado del firmware y está por eso listo. Si
hay problemas está apagado.
SYS
67
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
El encendido verde indica el correcto
funcionamiento del link a 100Mb/s el
encendido amarillo indica el correcto
funcionamiento del link a 10Mbps. Si brilla
indica transferencia de datos, si está
apagado indica que un link no funciona.
LAN
El encendido verde fijo indica la correcta
alineación, si brilla está alineándose.
ADSL
PPP
El encendido verde cuando son transferidos
datos en la WAN (PPPoA/PPPoE).
1.3 Las puertas posteriores
PUERTAS
UTILIZACION
Conexiona el cable RJ11 a esta puerta
para efectuar el anlace al ADSL.
ADSL (RJ-11)
LAN (RJ-45)
Conexiona, utilizando cables CAT5,
directamente a los diferentes PC y/o
Switch.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Luego de haber encendido el
dispositivo, aprieta delicadamente
durante 6 segundos. El Router
efectuará un reboot y volver a las
condicciones de default.
Reset
Jack al que conexionar el alimentador
POWER
1.4 Cablaje
Primero tienes que conectar el produco a la linea ADSL por
medio del cable RJ11 suministrado (en la puerta LINE),
luego conecta a las puertas RJ45 los PC de tu Lan o los
Switch. Finalmente conecta el alimentador al WebShare
Router ADSL2+ y luego a la toma eléctrica. Una vez
controladas todas las conexiones el WebShare Router
ADSL2+ el producto efectuará inmediatamente un
diagnóstico (60 segundos). Concluída esta fase los Led
POWER, SYS (tal vaz los Led LAN tambièn, si están
conectados a PC) estarán verdes fijos. El Led ADSL, si se
conectó adecadamente, inicialmente brillarà, durante toda
la fase de alineación y luego estará fijo, una vez alineado
(condiciòn indispensable para la navegación Internet).
Por lo que el ADSL y el normal servicio telefònico se dividon
(espeso) el mismo hilo para transportar los respectivos
signales es necesario, al fin de evitar interferencias
danosas, dividir por medio de un apto filtro los 2 signales.
Esto filtro que pasa bajo permiterà de extraer la porciòn de
espectro utilizada por el servicio telefònico impedendo asì
que la calidad de esto sea compromiso por las altas
frecuencias introducte por el signal del ADSL. Por lo tanto
es necessario utilizar un filtro para cada enchufe a la que
està conexionado un telèfono analogico. Hay filtres idòneos
que han 2 sortidas (una PSTN y una ADSL) y permiton de
utilizar sobre la misma enchufe el telèfono analogico y el
69
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Router ADSL tambièn. Esto filtro no es includo en el
producto y tiene que ser adquirido separadamente.
1.5 Configuraciones por Defecto
Antes de empezar la configuración del WebShare Router
ADSL2+ es necesario conocer cuales son las
configuraciones por defecto.
Dejando estos settaggi y poniendo en marcha los PC como
cliente DHCP (como en las instrucciones siguientes) y en fin
configurando la conexión al ISP (que habrá comunicado
todos los parametros del caso) será posible utilizar el
WebShare Router ADSL2+ en poquísimo tiempo. Para una
configuración más detallada acude al manual en el CD.
Las configuracciones por Defecto del WebShare Router
ADSL2+ son:
• Nombre del usuario : admin
• Password: atlantis
• Direcciòn IP: 192.168.1.254, Subnet Mask:
255.255.255.0
• DHCP Server habilitado
• WAN=PPPoA Routing, VPI=8, VCI=35, VC-Mux
1.6 Configuracciòn de IE
Ahora es necessario activar IE, ir al menù Strumenti,
luego elegir el tab Connessioni y elegir unas de las
siguientes voces:
•
utiliza nunca la conexiòn remota
• utilizza la conexiòn remota si no està disponible
una conexiòn de red
70
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
1.7 Configuracciòn del PC
Configuracciòn del PC en Windows 95/98/ME
1. Ve a Start/Settings/Control Panel. Cliccare 2 veces
Network y elege Configuration.
2. Elege
TCP/IP
->
NE2000 Compatible, o cualquiera Network Interface
Card (NIC) del PC.
3. Cliccare Properties
4. Elege la opciòn Obtain an IP address automatically
(despues de haber elegido IP Address).
5. Ve a DNS Configuration.
6. Elege la opciòn Disable DNS Y apreta OK para concluir
la configuraccion.
Encamina otra vez el PC para que los cambios habìan
efecto.
Configuración del PC en Windows NT4.0
1. Ve a Start/Settings/ Control Panel .pulsa 2 veces
Network y luego pulsa Protocols .
2. Elige TCP/IP Protocol y luego pulsa Properties.
3. Elige la opción Obtain an IP address from a DHCP
server y aprieta OK.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Configuración del PC en Windows 2000
1. Ve a Start/Settings/Control Panel. pulsa 2 veces
Network and Dial-up Connections.
2. Pulsa 2 veces Local Area Connection.
3. En Local Area Connection Status pulsa Properties.
4. Elige Internet Protocol (TCP/IP) y pulsa Properties.
5. Elige la opción Obtain an IP address automatically y
luego Obtain DNS server address automatically.
6. Aprieta OK para concluir la configuración.
Configuración del PC en Windows XP
1. Ve a Start y luego a Control Panel. pulsa 2 veces
Network (in Classic View) Connections.
2. Pulsa 2 veces Local Area Connection.
3. En Local Area Connection Status pulsa Properties.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
4. Elige Internet Protocol (TCP/IP) y pulsa Properties.
5. Elige la opcion Obtain an IP address automatically y
luego Obtain DNS server address automatically .
6. Aprieta OK para concluir configuración.
1.8 Configuracciòn Router
Entrar por medio del browser web a la siguiente direcciòn IP
(donde se inserta el URL) que por defecto es:
192.168.1.254, y aprieta el timbre envío.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Utiliza admin (como nombre usuario) y atlantis (como
password). Aprieta OK para seguir.
Aparecerà pues el Menù Principal, en su parte izquierda se
podrà acceder (como si se veieran los links en una
homepage) a todas las secciones:
• Status (ARP Table, Routing Table, DHCP Table,
System Log, Security Log)
• Quick Start
• Configuration (LAN, WAN, System, Firewall, QoS,
Virtual Server, Advanced)
• Save Config
Cliccando la secciòn deseada, se veràn en el espacio de la
homepage todos los settaggi relativos a la configuracciòn
de la secciòn elegida, o se abrirà una serie de
subsecciones entre que tienes que elegir antes de acceder
a la configuracciòn verdadera.
Seguiendo las instrucciones es posible render operativo el
WebShare 241 Router ADSL2+ en poquisimo tiempo a
condiciòn de que se utilizan las màquinas de la Lan settate
como client DHCP. Para una configuracciòn personalizada
74
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
de la Lan y del Router hacer referencia al manual sobre el
CD.
Elege el protocolo idòneo o apreta Quick Start para
efectuar una configuracciòn automàtica.
Picar sobre Configuration, WAN y luego ISP(Change).
Aparecerá la siguiente imagen en que es posible elegir el
protocolo utilizado por el ADSL.
PPPoE routed/PPPoA routed
PPPoE/PPPoA son conexiones ADSL conocidas como dial-
75
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
up DSL. Han sido creadas para integrar servicios de banda
ancha con una atención particular a la facilidad de
configuración. El usuario puede beneficiarse de una gran
velocidad de acceso sin cambiar la idea de funcionamiento y
compartir la misma cuenta con el ISP.
No es necesario ningun software suplementario. Esta
configuración es valida en caso de suscripción con 1 IP
estático y por lo tanto NAT (SUA) activo (para la gestión de
la clase pública hacer referencia al manual contenido en el
CD). Veamos como configurar correctamente este tipo de
configuracciòn ADSL.
• Description:
• VPI: 8
• VCI: 35
• NAT: Enable
• Username: Introduce el username suministrato por
vuestro ISP.
• Password: Introduce la password suministrata por
vuestro ISP.
• Service Name:
• IP address: deja esto parametro con el valor 0.0.0.0
• Authentication Protocol: Auto
• Connection: Always ON
• Idle-Timeout:
• RIP: No RIP
• MTU: 1500(PPPoA), 1492(PPPoE)
• PPPoE Relay:
Apreta Apply para hacer operativa la nueva configuracciòn.
Concluida la configuracciòn apreta Save Config to FLASH
(y luego Save) para hacer los settaggi fijos.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
RFC1483 routed / IpoA routed
Vemos los parametros de configurar:
• VPI: 8
• VCI: 35
• NAT: Enable
• Encapsulation: Inserte el protocolo suministrato
por vuestro ISP (LLC Routed)
Seleccionar Use the Following IP Address
• IP address: deja esto parametro con el valor
correcto.
• NetMask: deja esto parametro con el valor correcto.
• Gateway: deja esto parametro con el valor correcto.
• RIP: No RIP
Apreta Apply para hacer operativa la nueva configuracciòn.
Concluida la configuracciòn apreta Save Config to FLASH
(y luego Save) para hacer los settaggi fijos.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Atlantis Land S.p.A.
Viale De Gasperi, 122
Mazzo di Rho – MI – Italy
Where solutions begin
Company certified ISO 9001:2000
Download from Www.Somanuals.com. All Manuals Search And Download.
|