> > > > > > >
User’s
Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
This entire user’s guide is available on the enclosed CD as an Adobe Acrobat pdf file in the following languages: English, French, German, Italian, Norwe-
gian, Portuguese, Spanish, Russian, Japanese, Korean, Traditional Chinese, Simplified Chinese. Before using this projector, please read these instructions.
Le mode d'emploi complet est disponible sur le CD joint sous forme de fichier pdf d'Adobe Acrobat dans les langues suivantes : anglais, français,
allemand, italien, norvégien, portugais, espagnol, russe, japonais, coréen, chinois traditionnel, chinois simplifié. Avant d'utiliser ce projecteur, veuillez
lire ces instructions.
Die vollständige Benutzeranleitung ist auf der im Lieferumfang enthaltenen CD als Adobe Acrobat PDF-Datei in den folgenden Sprachen verfügbar:
Englisch, Französisch, Deutsch, Italienisch, Norwegisch, Portugiesisch, Spanisch, Russisch, Japanisch, Koreanisch, Traditionelles Chinesisch und
Vereinfachtes Chinesisch. Bitte lesen Sie diese Anweisungen vor der Verwendung des Projektors.
La presente guida è disponibile sul CD allegato, come file Adobe Acrobat pdf, nelle seguenti lingue: inglese, francese, tedesco, italiano, norvegese,
portoghese, spagnolo, russo, giapponese, coreano, cinese tradizionale e cinese semplificato. Prima di usare questo proiettore, leggere le seguenti istruzioni.
Hele denne brukerhåndboken finnes på den vedlagte CD-en som en Adobe Acrobat pdf-fil på følgende språk: Engelsk, fransk, tysk, italiensk, norsk,
portugisisk, spansk, russisk, japansk, koreansk, tradisjonell og forenklet kinesisk. Les diss anvisningene før projektoren tas i bruk.
Este guia do usuário completo está disponível no CD anexo, como um arquivo pdf do Adobe Acrobat nos seguintes idiomas: inglês, francês, alemão, italiano,
norueguês, português, espanhol, russo, japonês, coreano, chinês tradicional, chinês simplificado. Antes de utilizar este projetor, leia estas instruções.
Este manual de uso está disponible en su totalidad en el CD incluido, como archivo pdf de Adobe Acrobat, en los siguientes idiomas: inglés, frances, alemán,
italiano, noruego, português, español, ruso, japonés, coreano, chino tradicional, chino simplificado. Antes de usar el proyector, lea estas instrucciones.
Ⱦɚɧɧɨɟ ɪɭɤɨɜɨɞɫɬɜɨ ɩɨɥɶɡɨɜɚɬɟɥɹ ɜ ɩɨɥɧɨɦ ɨɛɴɟɦɟ ɩɪɟɞɫɬɚɜɥɟɧɨ ɧɚ ɩɪɢɥɚɝɚɟɦɨɦ ɤɨɦɩɚɤɬ-ɞɢɫɤɟ ɜ ɜɢɞɟ pdf-ɮɚɣɥɚ Adobe Acrobat ɧɚ ɫɥɟɞɭɸɳɢɯ
ɹɡɵɤɚɯ: ɚɧɝɥɢɣɫɤɨɦ, ɮɪɚɧɰɭɡɫɤɨɦ, ɧɟɦɟɰɤɨɦ, ɢɬɚɥɶɹɧɫɤɨɦ, ɧɨɪɜɟɠɫɤɨɦ, ɩɨɪɬɭɝɚɥɶɫɤɨɦ, ɢɫɩɚɧɫɤɨɦ, ɪɭɫɫɤɨɦ, ɹɩɨɧɫɤɨɦ, ɤɨɪɟɣɫɤɨɦ,
ɬɪɚɞɢɰɢɨɧɧɨɦ ɢ ɭɩɪɨɳɟɧɧɨɦ ɤɢɬɚɣɫɤɨɦ. ɉɟɪɟɞ ɢɫɩɨɥɶɡɨɜɚɧɢɟɦ ɩɪɨɟɤɬɨɪɚ, ɩɪɨɱɢɬɚɣɬɟ ɞɚɧɧɵɟ ɢɧɫɬɪɭɤɰɢɢ.
ŘųKПꢀПꢁ ꢂ .ŴЕ<Rꢃꢄꢅ$Ű֞ඤŜūʼnƐ CD Ű Adobe Acrobat ų PDF :ꢆ P༜ŭŜūऄⲟŚƑūʼnƃŞЖᜑų➸⠰ųKПꢀПꢁ ꢂ
.Ɨř
ߓ ᰻ʼnŤťŖƃŞЖ␣⠰Е:NXꢇ⠰Е. )⠰Е $Oꢈ⠰Е3PꢉꢄП⠰ЕBP-ꢂP⠰Еꢇ? X⠰ЕRꢊꢈ⠰ЕᎣᒍ⠰Е⺩ઞ⠰Е‱ת Ԟઞ⠰Е↭
ת Ԟઞ⠰ЖŘų<Rꢃꢄꢅ$Ɨ᰻ŞƐ߰ŰЕKПꢀПꢁ ꢂ .Ɨ྿şŏ⠿ƄŔťŚʼnЖ ꢀ&'ꢀ
ꢀ$GREHꢀ$FUREDWꢀSGIꢀ
ꢀ
ꢀ
ꢀ
Adobe Acrobat (PDF)
동봉된 CD에는 Adobe Acrobat pdf 파일 형식의 사용 설명서가 영어, 프랑스어, 독일어, 이탈리아어, 노르웨이어, 포르투갈어, 스페인어, 러시아어, 일본어, 한국
어, 중국어(번체 및 간체)로 제공됩니다. 이 프로젝터를 사용하기 전에 다음 지침을 읽으십시오.
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity
Manufacturer: InFocus Corporation, 27700B SW Parkway Ave. Wilsonville, Oregon
97070 USA
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands
We declare under our sole responsibility that this projector conforms to the following
directives and norms:
Agency Approvals
UL, CUL, TUV, GOST
Other specific Country Approvals may apply, please see product certification label.
EMC Directive 89/336/EEC, Amended by 93/68/EEC
EMC: EN 55022
This user’s guide applies to models C410, C420, GEN300, and GEN301.
InFocus reserves the right to alter product offerings and specifications at any time.
EN 55024
EN 61000-3-2
EN 61000-3-3
Remote Control Warning
Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC
Safety: EN 60950: 2000
February, 2004
Laser radiation class II product; wavelength 650nm; maximum output 1mW. Remote
control complies with applicable requirements of 21 CFR 1040.10 and 1040.11.
Remote control complies with applicable requirements of EN 60 825-1: 1994 +A11.
Trademarks
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple
Computer, Inc. IBM is a trademark or registered trademark of International Business
Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered
trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or regis-
tered trademarks of Adobe Systems Incorporated. InFocus, ProjectorNet, LiteShow,
and LP are trademarks or registered trademarks of InFocus Corporation.
Do not look into the laser beam emitted
from the front of the remote control.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is oper-
ated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
EN 55022 Warning
This is a Class A product. In a domestic environment it may cause radio interference,
in which case the user may be required to take adequate measures. The typical use is
in a conference room, meeting room or auditorium.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
If you are experienced in setting up presentation systems, use the included
Quick Set Up card. For complete details on connecting and operating the
projector, refer to this User’s Guide. Electronic versions of this User’s Guide
in multiple languages are available on the included CD and on our website.
Table of Contents
Introduction
Connecting a computer
5
7
Required computer connections
Displaying a computer image
First-time projector use with Windows 98
Adjusting the image
Connecting a video device
7
9
10
12
13
14
The website also has technical specifications (an interactive image size cal-
culator, laptop activation commands, connector pin outs, a glossary, the
product data sheet), a web store to buy accessories, and a page for online
registration. See the inside of the back cover for a list of all relevant web
addresses.
Displaying a video image
Shutting down the projector
Troubleshooting your setup
16
16
Using the keypad buttons
Using the remote control
Using the audio
24
25
Optimizing computer images
Presentation features
Optimizing video images
Customizing the projector
27
27
28
28
Using the menus
Picture menu
29
30
33
Settings menu
Maintenance
37
37
37
38
40
40
Cleaning the lens
Changing the lens
Replacing the projection lamp
Cleaning the dust filter
Using the security lock
Appendix
41
41
42
42
Accessories
Red LED behavior and projector errors
Projected image size
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Important Operating Considerations for Safety
•
Place the projector in a horizontal position no greater than 15 degrees
off axis.
Do not place objects in the areas along the side and in the front of the projector
•
Locate the projector in a well-ventilated area without any obstructions
to intake or exhaust vents. Do not place the projector on a tablecloth or
other soft covering that may block the vents.
2 ft (.6m)
2 ft (.6m)
•
Locate the projector at least 4' (1.2 m) away from any heating or cooling
vents.
•
•
Use only InFocus-approved ceiling mounts.
Use only the power cord provided. A surge-protected power strip is
recommended.
•
•
Refer to this manual for proper startup and shutdown procedures.
2 ft (.6m)
In the unlikely event of the lamp rupturing, discard any edible items
placed in the surrounding area and thoroughly clean the area along all
sides of the projector. Wash hands after cleaning the area and handling
the ruptured lamp. This product has a lamp which contains a very
small amount of mercury. Dispose of it as required by local, state or fed-
eral ordinances and regulations. For more information see
Follow these instructions to help ensure image quality and lamp life over
the life of the projector. Failure to follow these instructions may affect the
warranty. For complete details of the warranty, see the Warranty section at
the end of this user's guide.
5 ft (1.5m)
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Projector components and features
Introduction
keypad
Your new digital projector provides three computer and three video inputs
and has XGA 1024x768 resolution. Optional user-changeable short and long
throw lenses make this a flexible product suitable for many different uses.
The projector is easy to connect, easy to use, easy to maintain. An Interac-
tive Display on the top of the projector gives you constant feedback on the
status of the projector.
speakers
air intake
vent
Online Registration
elevator foot release
Register your projector on our website to receive product updates,
announcements, and registration incentives. See the inside of the back cover
for the web address.
zoom
focus
remote
control
receiver (IR)
Included items
heat vent
projector
connectors
cover
Interactive display
lens cap
documentation
remote
heat vent
leveling
foot
computer
cable
component to
VESA adapter
audio cable
USB cable
power
cable
audio/video cable
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Connector Panel
The projector provides three computer and three video connectors:
component video
PS/2
external
speakers
(audio out)
•
•
•
•
•
•
•
one M1-D (HD, DVI, and computer)
two VESA (HD, HD component, and computer)
one component RCA
M1-D computer
computer
mouse
screen
trigger
USB
mouse
s-video
monitor
RJ-45
audio
audio in
R
trigger
one S-video
monitor out
computer 2
computer 3
network PS/2
computer 1
USB
one composite RCA
L
audio in
serial control
one USB mouse (for use with the Computer 2 input only)
one PS/2 mouse (for use with the Computer 3 input only)
computer in
I
O
It also has an RS-232 serial connector for serial control and an RJ-45 connec-
tor for networked control via ProjectorNet software. The Command Line
Interface (CLI) specifications and commands are on our website.
lock
composite
video
RS232 serial control
VESA computers
power switch
power
connector
screen trigger connection
+12v
ground
A 2.5 mm mini-jack trigger provides a 12 volt DC output. It provides a con-
stant output while the projector is on. If you connect your projection screen
to the trigger with an optional cable, when you turn on the projector the
screen will move down; when you turn the projector off, the screen will
return to the storage position. You must turn this feature on in the System
menu to use it. See page 34.
to screen relay (see screen manufacturer
for details)
Wireless Projection
You can use the projector’s M1 connector along with the InFocus
LiteShow wireless adapter and software for cable-free digital projection.
Contact an authorized InFocus dealer or visit the website listed on the back
inside cover of this User’s Guide for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Connecting a computer
connect computer cable
audio in
R
trigger
monitor out
computer
co
2
network mouse
computer
1
USB
L
Required computer connections
audio in
serial control
computer in
I
O
Connect one end of the computer cable to the Computer 2 connector on the
projector. Connect the other end to the video port on your computer. If you
are using a desktop computer, you first need to disconnect the monitor
cable from the computer’s video port.
Some Macintosh computers do not have a standard VESA-out video port. If
the supplied computer cable will not connect to your computer, purchase
the appropriate adapter from your Apple reseller.
Connect the black power cable to the connector on the back of the projector
and to your electrical outlet.
connect power cable
audio in
R
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
L
audio in
3
serial control
computer in
I
O
NOTE: Always use the power cable that shipped with the projector.
Optional computer connections
connect USB or PS/2 cable
a
u
d
i
o
i
n
R
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
To control your computer’s mouse using the projector’s remote control, con-
nect the USB cable to the USB connector on the projector and on your com-
puter. USB drivers must be installed to use the USB feature. For more
information, see page 11. If your computer has a PS/2 connector, connect an
optional PS/2 cable to the PS/2 connector on the projector and on your com-
puter. The USB input is for Computer 2, the PS/2 input is for Computer 3.
L
a
u
d
i
o
i
n
3
serial control
computer in
I
O
connect audio cable
To have sound with your presentation, connect the audio cable to your com-
puter and to the computer Audio In connector on the projector.
audio in
R
trigger
monitor out
computer
mputer
2
network mouse
computer
1
USB
ao
3
serial control
I
O
Download from Www.Somanuals.com. All Manuals Search And Download.
7
If you are using a desktop computer and want to see the image on your
computer screen as well as on the projection screen, plug the monitor cable
to the Monitor out connector on the projector.
connect monitor cable
audio in
R
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
L
a
u
d
i
o
i
n
3
rrl
computer in
I
O
If you prefer connecting your computer to the projector with an optional
M1-D cable, connect one end of that cable to the M1 port on your computer,
and connect the other end to the Computer 1 connector on the projector.
connect M1-D cable
audio in
R
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
L
audio in
3
serial control
computer in
I
O
You can control the projector from an LCD control panel or computer by
connecting an RS-232 cable to the projector’s Serial connector. Specific
RS-232 commands can be found in the Service and Support section of our
website.
connect RS-232 cable
audio in
R
trigger
monitor out
computer
2
network mouse
computer
1
USB
L
audio in
computer
3
serial control
computer in
I
O
The projector can be managed by ProjectorNet networking software
through its Network connector.
connect network cable
audio in
R
trigger
monitor out
computer
2
network mouse
computer
1
USB
Contact an authorized dealer or visit our website for information on
ProjectorNet.
L
Network
audio in
computer
3
serial control
computer in
I
O
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Displaying a computer image
Remove the lens cap.
remove lens cap
2
press Power button
Press the power switch to position “1” on the back of the projector, then
press Power switch
press the Power button on the top of the projector or the remote.
I
O
The LED flashes green and the fans start to run. When the lamp comes on,
the startup screen is displayed and the LED is steady green. It can take a
minute for the image to achieve full brightness.
1
? No startup screen? Get help on page 17.
turn on computer
Turn on your computer.
The computer’s image should appear on the projection screen. If it doesn’t,
press the Computer button on the projector’s keypad.
activate laptop’s external port
Make sure your laptop’s external video port is active.
Many laptops do not automatically turn on their external video port when a
projector is connected. Usually a key combination like FN + F5 is used to
turn the external display on and off. Refer to your computer’s documenta-
tion to learn your computer’s key combination.
? No computer image? Try pressing the Auto Image
button on the keypad. Get help on page 17.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
First-time projector use with Windows 98
a
The first time you connect a computer running Windows 98 to the projector,
the computer recognizes the projector as “new hardware” and the Add
New Hardware Wizard appears. Follow these instructions to use the Wiz-
ard to load the correct driver (which was installed with your Windows
operating system).
If you are running Windows 2000, Windows ME, or Window XP, skip these
steps and go to “Adjusting the image” on page 12.
a Click Next to begin searching for the driver.
b
c
c Uncheck any checked boxes, then click Next. Windows automatically
locates the driver. If this driver has been removed, reload the driver using
your Windows operating system CD.
d
d When Windows finds the driver, you are ready to install it. Click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Skip this page if you did not connect a USB mouse cable
For Windows 98:
•
If you connected the USB cable, the Add New Hardware Wizard
appears again. Drivers must be installed to use the USB functionality.
•
The Wizard launches two times.
The first time it detects a USB Human Interface Device (for the key-
board).
The second time it detects a USB Human Interface Device (for the
mouse).
For Windows 2000, Windows ME, and Windows XP:
The USB drivers are automatically installed.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Adjusting the image
adjust height
Adjust the height of the projector, if necessary, by pressing the release but-
ton to extend the elevator foot.
rotate level-
ing foot
elevator
foot
Rotate the leveling foot (located at the bottom back right corner), if neces-
sary.
Position the projector the desired distance from the screen at a 90 degree
angle to the screen.
adjust distance
See page 42 for a table listing screen sizes and distances.
Adjust the zoom or focus rings by rotating them until the desired image size
and focus are produced.
adjust zoom and focus
zoom
focus
If the image is not square, adjust the vertical digital keystone by using the
buttons on the keypad.
adjust keystone
Press the upper Keystone button to reduce the upper part of the image, and
You can also adjust the horizontal keystone via the menus. See page 30.
adjust Contrast or Brightness
Adjust the Contrast or Brightness in the Picture menu.
See page 29 for help with the menus.
contrast
brightness
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Connecting a video device
Standard video connections
connect A/V cable
audio in
R
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
L
audio in
3
serial control
Plug the audio/video (A/V) cable’s yellow connector into the video-out
connector on the video device. Plug the other yellow connector into the yel-
low Video 2 connector on the projector.
computer in
Plug a white connector into the left audio out connector on the video device
and plug a red connector into the right audio out connector on the video
device. Plug the remaining white connector into the left audio in connector
on the projector (to the right of the yellow Video 2 connector), and plug the
red connector into the right audio in connector on the projector.
Connect the black power cable to the connector on the back of the projector
and to your electrical outlet.
audio in
R
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
L
audio in
3
serial control
computer in
I
O
connect power cable
NOTE: Always use the power cable that shipped with the projector.
Optional video connections
connect S-video and video cables
If the video device uses a round, four-prong S-video connector, plug an
S-video cable (sold separately) into the S-video connector on the video
device and into the Video 1 connector on the projector. Use the A/V cable’s
audio connectors as described directly above (the yellow connectors on the
A/V cable are not used).
audio in
R
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
L
audio in
3
serial control
computer in
I
O
If the video device uses component cable connectors (sold separately), plug
the cable’s green connectors into the green component-out connector on the
video device and into the green component connector (labeled “Y”) on the
projector. Plug the component cable’s blue connectors into the blue compo-
nent-out connector on the video device and into the blue component con-
nector (labeled “Pb”) on the projector. Plug the component cable’s red
connectors into the red component-out connector on the video device and
into the red component connector (labeled “Pr”) on the projector. If you are
using RGB input, plug the additional connector into the Video 2/Synch con-
nector and turn on the RGB Video option in the Sources menu. See page 33.
To connect a progressive scan EdTV or HD component source, use the Com-
ponent to VESA adapter to connect the source.
audio in
R
trigger
monitor out
computer
computer
2
network
mouse
computer
1
USB
L
connect component cables
and video cables
audio in
3
serial control
computer in
I
O
a
u
d
i
o
i
n
R
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
L
a
u
d
i
o
i
n
3
serial control
computer in
component to
VESA adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Displaying a video image
Remove the lens cap.
remove lens cap
2
press Power switch
press Power butto
Press the power switch to position “1” on the back of the projector, then
I
press the Power button on the top of the projector.
O
The LED flashes green and the fans start to run. When the lamp comes on,
the startup screen is displayed and the LED is steady green. It can take a
minute for the image to achieve full brightness.
1
? No startup screen? Get help on page 16.
turn on video device
Plug in and turn on the video device.
The video device’s image should appear on the projection screen. If it
doesn’t, press the Video button on the keypad.
Adjust the height of the projector by pressing the release button to extend
the elevator foot. Rotate the leveling foot, if necessary.
adjust height
rotate
leveling
foot
elevator
foot
Position the projector the desired distance from the screen at a 90 degree
angle to the screen. See page 42 for a table listing screen sizes and distances
to the screen.
adjust distance
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Adjust the zoom or focus rings by rotating them until the desired image size
and focus are produced.
adjust zoom and focus
zoom
focus
If the image is not square, adjust the vertical keystone using the buttons on
the keypad. Press the upper Keystone button to reduce the upper part of
the image, and press the lower Keystone button to reduce the lower part.
You can also adjust the horizontal keystone via the menus. See page 30.
adjust keystone
Adjust the volume on the keypad or remote.
adjust volume
Adjust the Contrast, Brightness, Color, or Tint in the Picture menu.
See page 29 for help with the menus.
adjust Picture menu
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Shutting down the projector
Troubleshooting your setup
The projector automatically blanks the screen after no active source is
detected for 30 minutes. This blank screen helps preserve the life of the pro-
jector. The image returns when an active source is detected or a remote or
keypad button is pressed.
If your image appears correctly on the screen, skip to the next section
(page 25). If it does not, troubleshoot the setup. The Interactive Display and
LED on top of the projector indicate the state of the projector and can help
you troubleshoot.
Screen Save
You can make the blank screen appear after five minutes by turning on
Screen Save in the Settings>System menu. See page 34.
Table 1: LED behavior and meaning
Power Save
LED color/behavior
Meaning
The projector also has a Power Save feature that automatically turns the
lamp off after no signals are detected for 5 minutes. After 3 additional min-
utes with no signal, the projector powers down. If an active signal is
received before the projector powers down, the image is displayed. You
must press the Power button to display an image after 30 minutes have
passed. When Power Save is enabled, Screen Save is disabled. See page 34.
solid green
The projector is plugged in and the power
switch is in the On position, or the projec-
tor has been powered on and the soft-
ware has initialized. The projector has
been turned off and the fans have stopped.
blinking green
The power button has been pressed and
the software is initializing, or the projec-
tor is powering down and the fans are
running to cool the lamp.
Turning off the projector
To turn off the projector, press the power button and verify that you want to
turn the projector off by pressing the power button again within 3 seconds.
You can cancel the shutdown by not pressing the power button a second
time. The lamp turns off and the LED blinks green for 1 minute while the
fans continue to run to cool the lamp. When the lamp has cooled, the LED
lights green and the fans stop. Press the power switch on the back of the
projector and unplug the power cable to completely power off the projector.
blinking red
A fan or lamp failure has occurred. Make
sure the vents aren’t blocked (see
page 22).Turn off the projector and wait
one minute, then turn the projector on
again. If the Replace Lamp message
appears, replace the lamp and reset the
lamp timer. Contact Technical Support if
the problem persists.
see page 42 for more information
solid red
An unidentifiable error: please contact
Technical Support.
The following tables show common problems. In some cases, more than one
possible solution is provided. Try the solutions in the order they are pre-
sented. When the problem is solved, you can skip the additional solutions.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Source Troubleshooting
Problem
Solution
Result
Plug power cable in, press power switch,
press power button. Remove lens cap.
No startup screen
Correct image
3
1
2
Computer image projected
Only startup screen appears
Press the Computer button
Activate laptop’s external port
startup
screen
A
A
A
or restart
laptop
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Adjust computer refresh rate in Control
Panel>Display>Settings>Advanced>
Adapter (location varies by operating
system)
No computer image, just the words “Signal out of
range”
Computer image projected
A
Signal
out
A
range
of
A
You may also need to set a different
resolution on your computer, as shown
in the problem, “Image fuzzy
or cropped”
Only my laptop’s background appears, not the
Desktop icons
Disable “Extend my Windows Desktop” in
Control Panel>Display>Settings>Display 2
(location varies by operating system)
Background and Desktop projected
A
A
A
A
Uncheck this
option, then
click Apply
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Set your computer’s display resolution to
the native resolution of the projector
(Start>Settings>Control
Panel>Display>Settings tab,
select1024x768)
Image clear and not cropped
Image fuzzy or cropped
A
A
A
For a laptop,
disable laptop
monitor
or turn-on dual-
display mode
Remote controls computer cursor. Note
that the mouse is not functional in zoom
mode (see page 35)
Connect USB cable (page 7) then load USB
drivers, if needed (page 10). Or, connect
PS/2 cable and reboot your computer.
Remote control not controlling my computer’s
mouse
See page 25 for information on the remote
a
u
d
i
o
i
n
R
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
L
a
u
d
i
o
i
n
3
serial control
computer in
I
O
X
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Projector troubleshooting
Problem
Solution
Result
Square image
Image not square
Adjust keystone on keypad or Picture menu
Correct image
Adjust the focus lens or Sharpness in the
Picture>Advanced menu
Image not sharp
A B
A B
Change aspect ratio to 16:9 in
Picture>Aspect ratio menu
Correct image
Image does not fit 16:9 screen
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Correct image
Turn off Ceiling in Settings>System menu
Image upside down
B
A
A B
Image reversed left to right
Turn off Rear in Settings>System menu
Correct image
A
A B
Correct image
Projected colors don’t match source
Adjust color, tint, color temperature,
brightness, contrast in the menus
COLOR
COLOR
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Turn off the internal LCD display on your
laptop
Embedded video plays correctly
The video embedded in my PowerPoint
presentation does not play on the screen
A
B
A
A
B
Unplug projector; wait one minute; plug in
projector and turn it on: lamp lights
projector to cool for one minute
Lamp won’t turn on, LED blinking red (page 16)
blinks
red
Lamp must be replaced (page 38)
Lamp won’t turn on, LED blinking red (page 16)
Lamp turns on
blinks
red
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Correct image
Move projector, adjust zoom, adjust height
Image not centered on screen
zoom
Adjust horizontal or vertical position in
Picture>Advanced menu
Still having problems?
If you need assistance, please visit our website or call us. See the inside of
the back cover for a list of all relevant web addresses.
This product is backed by a limited two-year warranty. An extended war-
ranty plan may be purchased from your dealer. When sending the projector
in for repair, we recommend shipping the unit in its original packing mate-
rial, or having a professional packaging company pack the unit. An optional
ATA shipping case is available for purchase that provides adequate protec-
tion for shipping. Please insure your shipment for its full value.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Using the keypad buttons
Most buttons are described in detail in other sections, but here is an over-
view of their functions:
menu–opens the on-screen menus (page 29).
select–confirms choices made in the menus (page 29).
auto image–resets the projector to the source.
keystone–vertical keystone adjusts the squareness of the image (page 12).
You can also adjust the horizontal keystone via the menus. See page 30.
volume–adjusts sound (page 26).
video and computer–changes the active source.
menu navigation buttons
Download from Www.Somanuals.com. All Manuals Search And Download.
24
®
®
If you are displaying presentations in Microsoft PowerPoint , you can use
the remote’s mouse buttons to navigate through your presentation while in
Slide Show mode. To configure PowerPoint for this, choose Options from
the PowerPoint Tools menu, click the View Tab, de-select the “Popup Menu
on Right Mouse Click” option in the Slide Show section, then click OK.
Then, when you’re in PowerPoint’s Slide Show mode, a left click advances
to the next slide and a right click returns to the previous slide (other Power-
Point modes are not affected).
Using the remote control
The remote uses two (2) provided AAA batteries. They are easily installed
by sliding the cover off the remote’s back, aligning the + and - ends of the
batteries, sliding them into place, and then replacing the cover.
To operate, point the remote at the projection screen or at the projector (not
at the computer). The range of optimum operation is about 30 feet (9.14m).
To use the laser pointer, press and hold the Laser button. The laser turns off
when the button is released, or times out after two (2) minutes of continu-
ous operation.
LED
WARNING: Do not look into the laser beam emitted from the top of the
remote control.
cursor control
backlight button
Left and right remote mouse buttons are used to mimic the actions of the
left/right mouse buttons on your computer. Mouse cursor movement is
managed via the remote’s Cursor control. Connect a USB or PS/2 cable to
the projector and the computer to use these buttons and control your com-
puter’s mouse. When you do this for the first time, the Add New Hardware
wizard may appear. See page 10 for details on loading the correct USB driv-
ers.
left mouse button
navigation buttons
right mouse button
Press the remote’s Menu button to open the projector’s menu system. Use
the arrow buttons to navigate, and the Select button to select features and
adjust values in the menus. See page 29 for more info on the menus.
The remote also has a power button to turn the projector on and off (see
page 16 for shutdown info), volume and mute buttons to control the sound,
a backlight button to light the remote’s buttons in the dark, and video and
computer buttons to switch between sources.
Troubleshooting the remote
•
not dead. The LED at the top of the remote lights when any button is
Two presentation-specific features are also provided. Use the blank button
to display a blank screen instead of the current slide (you can choose which
color is displayed, see page 34); use the effect button to invoke a user-defin-
able action, such as freeze or zoom (see page 35 to learn to program this but-
ton).
pressed when the battery power is adequate.
•
•
Make sure you’re pointing the remote at the projector, not the com-
puter, and are within the remote range of 30 feet (9.14m).
If you are trying to control your computer’s mouse, make sure a mouse
cable is connected. If using a USB cable, make sure the correct drivers
are installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Using the audio
connect audio cable
To play sound from the projector, connect your source to the Audio In con-
nector on the projector.
audio in
R
trigger
monitor out
computer
mputer
2
network mouse
computer
1
USB
i
3
serial control
I
O
To adjust the volume, use the buttons on the keypad or remote.
To adjust the bass, treble, balance, or loudness, use the Audio menu (see
page 33).
To mute the sound, press the Mute button.
adjust volume
Troubleshooting audio
If there is no sound, check the following:
•
•
•
Make sure the audio cable is connected.
Make sure mute isn’t active.
Make sure the volume is turned up enough. Press the volume button
on the keypad or remote.
•
Make sure you are connected to the corresponding audio in for your
source. Computer 1 and 2 share a single audio input, as do Video 2
and 3.
computer 1 and
corresponding audio
audio in
computer 3 and
corresponding audio
•
•
Adjust the audio source.
computer
computer
2
3
computer
1
If playing a video, make sure the playback has not been paused.
audio in
computer in
audio in
R
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
L
external speakers
audio in
3
serial control
computer in
I
O
Connecting external speakers
The projector can be attached to external speakers that have their own
power source by plugging speaker cables into the projector’s left and right
Audio Out connectors.
audio out
speaker
cable
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Optimizing computer images
Presentation features
After your computer is connected properly and the computer’s image is on
the screen, you can optimize the image using the onscreen menus. For gen-
eral information on using the menus, see page 29.
Several features are provided to make giving presentation easier. The fol-
lowing is an overview, details are found in the menu section on page 29.
•
The remote’s Effect button allows you to assign various features to the
key. The default effect is Zoom. You can select from Blank, Mute,
Aspect Ratio, Source, Auto Image, Freeze, Zoom, About, PiP, Mask, and
Screen Trigger. See page 35 for details.
•
•
Adjust the Keystone, Contrast, or Brightness in the Picture menu.
Change the Aspect Ratio. Aspect Ratio is the ratio of the image width to
image height. TV screens are usually 1.33:1, also known as 4:3. HDTV
and most DVDs are 1.78:1, or 16:9. Choose the option that best fits your
input source. See page 30 for details.
•
The Freeze effect allows you to freeze the displayed image. This is use-
ful if you want to make changes on your computer without your audi-
ence seeing them.
•
•
Adjust the Color Temperature in the Advanced menu.
•
•
•
•
The Blank button on the remote allows you to display a blank screen
instead of the active source. See page 34.
Adjust the Phase, Tracking, or Horizontal or Vertical position in the
Advanced menu.
The PiP effect lets you show a video source in a smaller window on top
of the computer image. See page 35.
•
•
Once you have optimized the image for a particular source, you can
save the settings using Presets. This allows you to quickly recall these
settings later. See page 31.
The Startup Logo menu option lets you change the default startup
screen to a black, white, or blue screen. See page 34.
Adjust the Room Lighting. Select Dark if you are in a dark room, Light
if in a bright room (page 31).
Two menu options, Power Save and Screen Save, are provided to auto-
matically shut down the projector after several minutes of inactivity or
display a blank screen. This helps preserve lamp life. See page 33 and
page 34.
•
A Low Power menu option is also available on the C420 only to help
lower the projector’s fan sound volume. See page 33.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Optimizing video images
Customizing the projector
After the video device is connected properly and the image is on the screen,
you can optimize the image using the onscreen menus. For general informa-
tion on using the menus, see page 29.
You can customize the projector for your specific setup and needs. See
page 33 to page 37 for details on these features.
•
•
For rear projection, turn Rear mode on in the Settings>System menu.
•
Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Picture
menu. See page 30.
For ceiling mounted projection, turn Ceiling mode on in the Set-
tings>System menu.
•
Change the Aspect ratio. Aspect ratio is the ratio of the image width to
image height. TV screens are usually 1.33:1, also known as 4:3. HDTV
and most DVDs are 1.78:1, or 16:9. Choose the option that best fits your
input source. See page 30.
•
Specify which source the projector checks first for active video during
power-up.
•
•
•
•
•
•
Specify the function of the Effect Key on the remote.
Turn the projector’s display messages on and off.
Turn on power saving features.
•
•
Select a Sharpness setting. See page 32.
Adjust the Color Temperature. Select a listed value, or select User and
individually adjust the intensity of the red, green, and blue color. See
page 32.
Specify blank screen colors and startup logos.
Specify the menu language.
•
Adjust the Room Lighting. Select Dark if you are in a dark room, Light
if in a bright room (page 31).
Manage your projector via ProjectorNet software. See page 8 for more
information.
•
•
•
•
Project wirelessly with LiteShow wireless adapter. See page 6.
Control your projector using RS232 commands. See page 8.
Use the screen trigger to control your projection screen. See page 6.
Customize the projector for your specific installation using optional
long or short throw lenses. See page 41 for ordering information.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Using the menus
Dot
To open the menus, press the menu button on the keypad or remote. (The
menus automatically close after 60 seconds if no buttons are pressed.) The
Main menu appears. Use the arrow buttons to move up and down to high-
light the desired submenu, then press the Select button.
Menu
button
To change a menu setting, highlight it, press Select, then use the up and
down arrow buttons to adjust the value, select an option using radio but-
tons, or turn the feature on or off using check boxes. Press Select to confirm
your changes. Use the arrows to navigate to another setting. When your
adjustments are complete, navigate to Exit, then press Select to go to the
previous menu; press the Menu button at any time to close the menus.
Keypad navigation
buttons
Main menu
Dots appear before the menu name. The number of dots indicate the menu’s
level, ranging from one (the Main menu) to four (the most nested menus).
Picture
menu
Dots
The menus are grouped by usage:
•
•
The Picture menu provides image adjustments.
Settings
menu
The Settings menu provides set-up type adjustments that are not
changed often.
•
The About menu provides a read-only display of information about the
projector and source.
Certain menu items may be grayed out until a particular source is con-
nected. For example, Sharpness is only available for video sources and will
be hidden when a computer source is active. Other menu items may be
grayed out when they are not available. For example, Brightness is grayed
out until an image is active.
About menu
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Picture menu
To adjust the following six settings, highlight the setting, press Select, use
the up and down arrows to adjust the values, then press select to confirm
the changes.
Vertical Keystone
increasing keystone
decreasing keystone
Vertical Keystone: adjusts the image vertically and makes a squarer image.
You can also adjust vertical keystone from the keypad.
Horizontal Keystone: adjusts the image horizontally and makes a squarer
image.
Contrast: controls the degree of difference between the lightest and darkest
parts of the picture and changes the amount of black and white in the
image.
Brightness: changes the intensity of the image.
Horizontal Keystone
Color: (video sources only) adjusts a video image from black and white to
fully saturated color.
Tint: (NTSC video sources only) adjusts the red-green color balance in the
image.
Aspect Ratio: Aspect ratio is the ratio of the image width to image height.
TV screens are usually 1.33:1, also known as 4:3. HDTV and most DVDs are
1.78:1, or 16:9. The default is 4:3, which displays the input resized up or
down to fill the display area.
Aspect Ratio
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Presets: The provided Presets optimize the projector for displaying com-
puter presentations, photographs, film images, and video images. (Film
input is material originally captured on a film camera, like a movie; video
input is material originally captured on a video camera, like a TV show or
sporting event.) You can use the preset as a starting point, then further cus-
tomize the settings for each source. The settings you customize are saved in
the preset for each source. To restore the factory default settings, choose Fac-
tory Reset in the Settings>Service menu.
There are also three user-definable presets. To set a preset for the current
source, adjust the image, then choose Save User 1, 2, or 3. You can recall
these settings in the future by selecting the appropriate user presets.
Presets
Room Lighting: This features optimizes the projector for your room’s light-
ing conditions. Select Dark if you are in a dark room, Light if in a bright
room. Choosing Light maximizes the light output from the projector.
Room Lighting
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Advanced settings
Sharpness: (video sources only) changes the clarity of the edges of a video
image. Select a sharpness setting.
Sharpness
Color Space: This option applies to computer and component video
sources. It allows you to select a color space that has been specifically tuned
for the video input. When Auto is selected, the projector automatically
determines the standard. To choose a different setting, turn off Auto, then
choose RGB for computer sources, choose either SMPTE240, REC709 or
REC601 for component video sources.
Color Space
Color Temperature: changes the intensity of the colors. Select a listed
value, or select User and individually adjust the intensity of the red, green,
and blue colors.
Color Temperature
The following 4 options are for computer sources only.
Phase: adjusts the horizontal phase of a computer source.
Tracking: adjusts the vertical scan of a computer source.
Horizontal/Vertical Position: adjusts the position of a computer source.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Settings menu
Audio: allows adjustments to the volume, bass, treble and balance. Also
allows you to turn on and off Loudness (which boosts the higher and lower
frequencies), the Internal speakers, and projector startup Chime.
Audio
Sources: allows you to assign a particular input to a specific source key
when using the optional Integrator remote. Also allows selection of a
default Startup Source and enables or disables Autosource and RGB.
Sources>Startup Source: this determines which source the projector
checks first for active video during power-up.
Sources>Autosource: When Autosource is not checked, the projector
defaults to the source selected in Startup Source. If no source is found, a
blank screen displays. When Autosource is checked, Startup Source deter-
mines which source the projector defaults to at power-up. If no signal is
present, the projector checks the sources in order until a source is found or
until power down.
Startup
Source
Sources>RGB Video: check this box if you are using a DVD player with
Sources
RGB output.
System>Rear: reverses the image so you can project from behind a translu-
cent screen.
Ceiling: turns the image upside down for ceiling-mounted projection.
Auto Power: When Auto Power is checked, the projector automatically
goes into the startup state after the projector is powered on. This allows con-
trol of ceiling mounted projectors with a wall power switch.
Display Messages: displays status messages (such as “Searching” or
“Mute”) in the lower-left corner of the screen.
System menu
Low Power: (C420 only) toggles between on and off. Turn it on to lower the
light output of the lamp. This also lowers the fan speed, making the projec-
tor quieter.
Power Save: automatically turns the lamp off after no signals are detected
for 5 minutes. After 3 additional minutes with no signal, the projector pow-
ers down. If an active signal is received before the projector powers down,
the image will be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Screen Save: automatically blanks the screen after no signals are detected
for five minutes. The image returns when an active source is detected or a
remote or keypad button is pressed. Screen Save is disabled when Power
Save is enabled.
Screen Trigger: this enables the Screen Trigger connection on the connector
panel. See page 6 for details.
Startup Logo: allows you to display a blank Black, White, or Blue screen
instead of the default screen at startup and when no source is detected. It
also allows you to capture and display a custom startup screen.
Startup Logo
To capture a custom logo, display the image you want to capture on your
computer, highlight Capture New, then press Select twice. While the cap-
ture is underway, the LED on the keypad turns orange. When ready, the
projector confirms the capture and the LED changes to green.
The next time you start the projector, the custom logo you captured dis-
plays.
Blank Screen: determines what color is displayed when you press the
Blank button on the remote.
Blank Screen
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Effect Key: allows you to assign a different function to the Effect button on
the remote to quickly and easily use the effect. Only one effect can be
enabled at a time. Highlight an effect and press Select to choose a different
one.
Blank: shows an empty screen.
Mute: turns off all sound.
Effect Key
Aspect Ratio: sets the ratio of the image width to image height.
Source: cycles through the available sources.
Auto Image: causes computer sources to be reacquired.
Freeze: pauses the projected image.
Zoom: Is the default effect. It lets you magnify a part of the screen. To
use the Zoom effect, press Effect, then press the remote’s left mouse to
zoom the image, press the right mouse button to decrease the magnifi-
cation. You can use the cursor control to pan the image, displaying dif-
ferent parts of it (only if the image is magnified). To return to the
original size and cancel Zoom, press the Effect button a second time.
About: displays the About menu.
PiP: (Picture in Picture) allows you to overlay a smaller window show-
ing the video source on top of the larger computer source window. You
must have both a computer and video source connected to use PIP. You
can’t show a computer image in the smaller PiP window, only a video
image. You can select a small, medium, or large window. You can also
move the PiP window on the screen using the PiP Position X and Y
options in the menu. Press the up and down arrows to change the posi-
tion.
Picture in Picture
Mask: allows you to cover part of the image with a black curtain. Press
the up and down arrows to raise or lower the curtain on the image.
Screen Trigger: this enables the Screen Trigger connection on the con-
nector panel. See page 6 for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Network: The projector has an RJ45 Ethernet connector that supports net-
work connections and TCP/IP protocols. This will allow for the control and
management of the projector over a corporate network. The following fields
are accessible when DHCP is not checked and available for manual entry of
data.
Network
Network
Info
IP Address: Identifies the projector on the network.
Subnet mask: Separates the network address part of the IP address.
Default gateway: The IP address of the local router.
DHCP: Select this to automatically obtain an IP address, Subnet mask,
and Default gateway.
Network Info: Provides information on the network configuration.
The Network Info menu is informational and cannot be edited. It displays
the current IP Address, Subnet Mask, Default Gateway, and the projector’s
MAC Address.
Language
Language: allows you to select a language for the onscreen display of
menus and messages.
Service: to use these features, highlight them and press Select.
Factory Reset: restores all settings (except Lamp Hours and Network set-
tings) to their default after displaying a confirmation dialog box.
Reset Lamp: resets the lamp hours counter in the About menu to zero. Do
this only after changing the lamp. It displays a confirmation dialog box.
Service menu
Service Info: provides information about the projector’s software version
and the active source.
Service Code: only used by authorized service personnel.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Maintenance
clean the lens
with a soft dry cloth
and non-abrasive
cleaner
Cleaning the lens
1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
Avoid using an excessive amount of cleaner, and don’t apply the
cleaner directly to the lens. Abrasive cleaners, solvents or other harsh
chemicals might scratch the lens.
2 Lightly wipe the cleaning cloth over the lens in a circular motion. If you
don’t intend to use the projector immediately, replace the lens cap.
Changing the lens
Optional long throw and short throw lenses are available. See “Optional
Accessories” on page 41 for ordering information.
audio in
R
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
turn off and unplug
the projector
L
audio in
3
serial control
computer in
I
O
1 Turn off the projector and unplug the power cable.
2 Set the projector upright with the lens facing upward, place a screw-
driver or other narrow object in the release hole on the bottom of the
projector, then twist the lens counterclockwise to remove it.
3 To install the new lens, align the red dot (near the base of the lens) with
the top of the projector and turn clockwise until you feel the lens click
into place.
lens release hole
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Replacing the projection lamp
The lamp hour timer in the About menu counts the number of hours the
lamp has been in use. When the specified end of the lamp’s life is reached,
the message “Replace lamp” briefly appears on the screen at each startup
and in the Interactive Display. You can order new lamp modules from your
dealer. See “Accessories” on page 41 for information.
About menu
audio in
R
turn off and unplug
the projector
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
1 Turn off the projector and unplug the power cable.
L
audio in
3
serial control
computer in
I
O
2 Wait 60 minutes to allow the projector to cool thoroughly.
wait 60 minutes
3 Turn the projector upside down and remove the lamp door by removing
the two screws and sliding the lamp door tabs out of the two tab bays.
remove the screws on lamp door
4 Loosen the three captive screws on the lamp module.
loosen the screws on lamp module
Download from Www.Somanuals.com. All Manuals Search And Download.
38
WARNINGS:
•
To avoid burns, allow the projector to cool for at least 60 minutes before
you replace the lamp.
•
•
Do not drop the lamp module. The glass may shatter and cause injury.
Do not touch the glass lamp screen. Fingerprints can obscure projection
sharpness.
•
Be extremely careful when removing the lamp housing. In the unlikely
event that the lamp ruptures, small glass fragments may be generated.
The lamp module is designed to contain most of these fragments, but
use caution when removing it.
remove module using bail wire
5 Carefully remove the lamp module by grasping and lifting the metal
bail wire. Dispose of the lamp in an environmentally proper manner.
6 Install the new lamp module, making sure that it is properly seated.
7 Tighten the three screws.
8 Replace the lamp door by inserting the tabs into the tab bays and tight-
ening the two screws.
9 Plug in the power cable, press the power switch then press the Power
button to turn the projector back on.
10 Reset the lamp hour timer.
Resetting the lamp timer
After replacing the lamp, reset the lamp timer. Navigate to the Set-
tings>Service menu and select Lamp Reset to reset the lamp timer.
reset lamp time in Service menu
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Cleaning the dust filter
1 Turn off the projector and unplug the power cable.
audio in
R
turn off and unplug
the projector
trigger
monitor out
computer
computer
2
network mouse
computer
1
USB
L
audio in
3
serial control
2 Wait 60 minutes to allow the projector to cool thoroughly.
computer in
I
O
WARNING: To avoid burns, allow the projector to cool for at least 60
minutes before you clean or replace the dust filter.
wait 60 minutes
3 Turn the projector upside down and remove the lamp door. See page 38.
4 Press the tab on the dust filter and lift it off.
5 Clean the filter using a vacuum set on low power.
6 Replace the dust filter and the lamp door.
Using the security lock
The projector has a security lock for use with a cable lock system. See
“Accessories” on page 41 for ordering information. Refer to the information
that came with the lock for instructions on how to use it.
audio in
R
trigger
monitor out
computer
computer
2
network PS/2
computer
1
USB
L
audio in
3
serial control
computer in
I
O
security lock
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Appendix
Optional Accessories
Part Number
CA-ATA-017
SP-CEIL-005-B
SP-LTMT-PLT
SP-LTMT-EXTP
Accessories
Shipping Case (ATA approved)
Projector Mount
Standard Accessories
(ship with the projector)
False Ceiling Plate for Projector Mount
Part Number
111-0033-xx
110-0710-xx
516-0062-xx
516-0051-xx
301398B
Extension Arm for Projector Mount
26” - 47”
Shipping Box (with packaging)
Protective Cover
Short Throw Lens
LENS-020
Computer Cable 6 ft (1.8 m)
Audio/Video Cable 6 ft (1.8 m)
Audio Cable 6 ft (1.8 m)
Component to VESA Adapter
Power Cable*
Long Throw Lens
LENS-021
DVI-D Cable 6 ft (1.8 m)
LiteShow Wireless Connection
ProjectorNet Software
SP-DVI-D
LP-LITESHOW
SW-PN2-1CD
SP-VGAEXT50-D
SP-VESA-ADPT
516-0052-xx
301378A
VGA Cable/Line Amp Extension, 50 ft
(15m)-Domestic
USB Cable
VGA Cable/Line Amp Extension, 50 ft
(15m)-International
SP-VGAEXT50-I
Conductor Plus Remote
HW-CONDUCTOR+
SP-LAMP-012
Projection Lamp Module (included
in projector)
Audio/Video Cable, 30 ft (9m)
Projector Cable Lock System
50” Diagonal Screen (portable)
60” Diagonal Screen (portable)
84” Diagonal Wall/Ceiling Mounted Screen
Replacement Lamp Module
SP-AV30
SP-LOCK-B
Lens Cap
340-1185-xx
009-0657-xx
010-0453-xx
009-0659-xx
SP-CABLETIES
301130
A650
Quick Setup card
User’s Guide with CD
Safety Card
HW-DLXSCRN
HW-WALLSCR84
SP-LAMP-012
HW-RF-POCKTPNT
HW-PRESENTER
HW-INTEGRATOR
Color-coded Cable Ties, 3 set
SCART Adapter*
*country-dependent
MindPath RF PocketPoint Remote
IR Presentation Remote Control
IR Integrator Remote Control
NOTE: Use only approved accessories.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Red LED behavior and projector errors
Projected image size
Table 3:
Image sizes for standard lens
If the projector is not functioning properly and the red LED is blinking, con-
sult Table 2 to determine a possible cause. There are two second pauses
between the blinking cycles. Visit our website for more details on the red
LED error codes. See the inside back cover for contact information.
Distance to
screen
Minimum
Width
Maximum
Width
(feet/m)
(feet/m)
(feet/m)
Table 2:
5/1.52
2.08/.64
3.33/1.02
5.0/1.52
2.78/.85
Red LED Behavior
Explanation
8/2.44
12/3.66
16/4.88
20/6.1
4.44/1.35
6.67/2.03
8.89/2.71
11.11/3.39
16.67/5.08
18.33/5.59
One (1) blink
The lamp won't strike after five (5)
attempts. Check the lamp and lamp door
installations for loose connections.
6.67/2.03
8.33/2.54
12.5/3.81
13.75/4.19
30/9.14
33/10.1
Two (2) blinks
The lamp counter hours have exceeded
lamp life hours. Replace the lamp and
reset the lamp hours counter.
Three (3) blinks
The projector has shut down the lamp.
Replace the lamp. Contact Technical Sup-
port for repair if replacing the lamp does
not solve the problem.
Table 4:
Image sizes for long throw lens
Four (4) blinks
Five (5) blinks
The fan has failed. Contact Technical Sup-
port for repair.
Distance to
screen
(feet/m)
Minimum
Width
(feet/m)
Maximum
Width
(feet/m)
The projector is overheating. Check for a
blocked air vent. Contact Technical Sup-
port for repair if clearing the air vents
does not solve the problem.
16/4.88
3.02/0.92
3.77/1.15
5.66/1.73
7.55/2.3
5.33/1.63
20/6.1
30/9.14
6.67/2.03
10/3.05
40/12.19
50/15.24
100/30.48
13.33/4.06
16.67/5.08
33.33/10.16
9.43/2.88
18.87/5.75
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Table 5:
Image sizes for short throw lens (fixed focus)
Distance to
screen
Width
(feet/m)
(feet/m)
3/.91
5/1.52
8/2.44
12/3.66
16/4.88
20/6.1
2.5/.76
4.17/1.27
6.67/2.03
10/3.05
13.33/4.06
16.67/5.08
NOTE: Visit our website for an interactive image size calculator.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Numerics
1024x768 resolution 5
Contrast 12, 15
custom logo
startup screen 34
A
customer service contact information 23
About 35
Aspect Ratio 35
D
audio 26
Default gateway 36
DHCP 36
Display Messages 33
Audio In connector 7, 13
audio volume 15
Auto Image 35
Auto Power 33
displaying
computer image 9
PiP 35
B
video image 14
Drivers 10
Blank 35
blinking green 16
blinking red 16
Brightness 12
USB 11
Windows 98 11
C
E
cables
Effect Key 35
elevator foot 12
optional 41
standard 41
changing the lens 37
cleaning the dust filter 40
cleaning the lens 37
Color 15
colors are incorrect 21
component cable connector 13
computer connections
optional 7
F
first time use
driver installation 10
focus 12, 15
Freeze 35
fuzzy image 19
required 7
computer image
optimize 27
troubleshooting 17
connector panel 6
contacting InFocus 23
Download from Www.Somanuals.com. All Manuals Search And Download.
44
I
M
image
Main menu 29
menu system 29
Monitor connector 7
mouse, using your 7
Mute 35
display computer 9
display video 14
image does not fit screen 20
image not centered 23
image not sharp 20
image not square 20
image reversed 21
image size matrix 42
image upside down 21
Info
N
Network 36
Network connector 8
Network Info 36
no computer image 18
no startup screen 17
network 36
IP Address 36
O
only startup screen appears 17
optional accessories 41
K
Keystone 12, 15
P
L
Picture in Picture 35
Picture menu 30
PiP 35
Power button 14
power cable 7, 13
Power Save 33
lamp replacement 38
lamp won’t turn on 22
Language 36
laptop
connecting 7
external video port 9
LED
PowerPoint
remote’s mouse buttons 25
presentation features 27
projector
blinking green 16
blinking red 22
solid green 16
solid red 22
connector panel 6
customizing 28
LED behavior 16
optional accessories 41
lens
shutdown 16
changing 37
cleaning 37
leveling foot 12
Low Power 33
standard accessories 41
troubleshooting problems 16
projector height 12, 14
projector positioning 12, 14
Download from Www.Somanuals.com. All Manuals Search And Download.
45
R
V
Rear 33
Video button 14
video connections
optional 13
remote control 25
not working 19
replacing the lamp 38
RS-232
standard 13
Video connector 13
video images
optimizing 28
cable 8
connecting 6
S
W
screen trigger 6
security lock 40
serial connection 6
Settings menu 33
shutdown
warranty 23, 47
Windows 2000 11
Windows 98 10
Windows ME, XP 11
projector 16
X
solid green 16
solid red 16
Source 35
Z
Source troubleshooting 17
Sources 33
zoom 12, 15, 35
standard accessories
projector 41
Subnet mask 36
S-video connector 13
T
Tint 15
trigger, screen 6
Troubleshooting 16, 17
U
USB, using your mouse 7
Download from Www.Somanuals.com. All Manuals Search And Download.
46
IF YOU NEED ASSISTANCE....
For all types of Service and Support information on our products
Many resources are available on our website.
Some examples are:
• Frequently Asked Questions about general
projector usage and technical issues
• E-mail support
• Online product registration
• Product data sheets
• Optional accessories
• Technical specifications, interactive image size calculator,
laptop activation commands and more!
Download from Www.Somanuals.com. All Manuals Search And Download.
InFocus Corporation
27700B SW Parkway Avenue
Wilsonville, Oregon 97070-9215
1-800-294-6400 503-685-8888
•
Fax: 503-685-8887
In Europe:
InFocus International B.V.
Strawinskylaan 585
1077 XX Amsterdam,The Netherlands
Phone: +31 20 579 2000
Fax: +31 20 579 2999
In Asia:
238A Thomson Road
#18-01/04 Novena Square
Singapore 307684
Telephone: (65) 6334-9005
Fax: (65) 6333-4525
Download from Www.Somanuals.com. All Manuals Search And Download.
|