Ask Proxima Projector C250 C250W C315 User Manual

C250 C250W C315  
Quick Start  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect source  
3
Color-coded connections make it easy.  
You can connect more than one source if needed.  
Got an Apple computer?  
Connect to: Computer  
Computer  
You may need an adapter. For more  
information, see How-To Guides at  
www.infocus.com/support/howto  
Computer Cable (included)  
USB  
is optional  
USB connection only needed for:  
Presentation control using  
projector remote  
Upgrading projector firmware  
OR  
Connect to: DVD or VCR* (using optional cables)  
Connect video using either an S-Video or a Composite Video cable  
1
Connect audio using a Mini-Plug to RCA Audio Y-Cable  
2
Composite Video Cable  
S-Video Cable  
Good  
OR  
Better  
  
Mini-Plug Audio Y-Cable  
L
R
Audio Out  
Video Out  
DVD or VCR  
*Also for game console or cable box.  
RCA Audio Cable  
To Projector  
or  
Want better sound?  
Connect the source's audio output to a  
receiver/amplifier or home theater  
system with separate speakers.  
L
R
L
R
Audio In  
Audio Out  
Video Out  
Home Theater or Receiver  
DVD or VCR  
OR  
Connect to: Other kinds of sources  
How-To Guides are available at www.infocus.com/support/howto  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turn on projector and source  
4
1 Connect the power cord to the projector  
and to an electrical outlet  
The power light  
on the projector will light amber.  
2 Turn on the projector  
Press power (on the projector or remote).  
The power light will start blinking green.  
3 Wait for the lamp to warm up  
After a few seconds, the power light will stop blinking and turn  
green. It can take a minute for the lamp to reach full brightness.  
5-10 sec.  
Warning: Do not look directly into the lens  
when the projector is turned on.  
4 Turn on computer or other source  
You may need to press a specific key combination to activate  
your laptop's external video port. On most laptops, hold down  
the FN key while pressing a key labeled CRT/LCD, LCD/VGA,  
a monitor icon  
, or similar. Key combos for popular models:  
Apple F7  
Dell Fn+F8  
Fujitsu Fn+F10  
Gateway Fn+F3 or Fn+F4  
HP/Compaq Fn+F4 or Fn+F6  
Sony Fn+F7  
IBM ThinkPad Fn+F7  
Toshiba Fn+F5  
Important: If there is still no video, restart your  
computer (first make sure it's connected to the  
projector and the projector is turned on).  
source  
5 Change source if needed  
If needed, press source (on the projector or remote) to view the  
source. You may have to press it more than once.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust the picture  
5
Projector Location  
1
1 Height  
As distance increases, the  
image gets larger and  
moves upwards.  
2
1 Hold down the release button on  
Lens center line  
top of the projector.  
2 Lift the front of the projector to  
the desired height.  
3 Release the button.  
C250 C315  
Diagonal  
Distance to Screen  
Screen Size  
60" / 1.5m  
80" / 2m  
Minimum  
Maximum  
7'5" / 2.2m 9'1" / 2.7m  
9'10" / 2.9m 12'1" / 3.6m  
11'4" / 3.4m 13'11" / 4.2m  
2 Keystone  
92" / 2.3m  
150" / 3.8m 18'5" / 5.6m 22'8" / 6.9m  
C250W  
Diagonal  
Distance to Screen  
Screen Size  
60" / 1.5m  
80" / 2m  
Minimum  
Maximum  
8'1" / 2.4m 9'10" / 2.9m  
10'10" / 3.2m 13'1" / 3.9m  
12'5" / 3.7m 15' / 4.5m  
Press the keystone buttons to  
make the picture square.  
92" / 2.3m  
150" / 3.8m 20’2" / 6.1m 24'6" / 7.5m  
3 Zoom and focus  
Focus  
Interactive Screen Size and  
Distance Calculator  
Zoom  
Adjust zoom first, then focus the  
center of the image.  
Ceiling mount?  
To flip the image, enable Ceiling in the  
System menu (press menu, then select  
Settings > System > Ceiling).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the menus  
1 Press menu to show menus  
2 Press or to choose items (or adjust setting)  
3 Press select to confirm menu choice  
4 Press menu to hide menus  
Controlling your presentations  
Connect the computer cable (including USB) to your computer, then use  
move through your presentation slides.  
and to  
Turn off the projector  
6
Press the power button twice  
The first press shows a confirmation message; the second  
press confirms that you want to power off.  
The power light on the projector will blink while the fan cools  
the lamp. If you need to unplug the projector, wait until the  
fan stops and the power light stops blinking and stays on.  
Note: While the power light is blinking, button presses on the  
projector and remote are ignored.  
Register your product  
7
Activate your warranty to ensure eligibility for service and support.  
Get special offers and notifications about free product updates.  
1 Write down your projector's serial number  
It's printed on the label on the back of the projector. You'll need it to register (and if  
you ever need to contact support).  
Serial number:  
Read the Reference Guide  
8
Insert the CD-ROM, or go to www.askproxima.com/support  
The Reference Guide is on the CD-ROM in multiple languages. It covers advanced setup and  
operation, including lamp replacement instructions. The Reference Guide is also available at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If there is no picture or the picture is blank  
If the power light is off, make sure the power cord is connected and plugged  
into a live electrical outlet. If the power light is amber and not blinking, press  
the power button.  
Check video source and cables. Make sure the video source (computer, DVD  
player, VCR, etc.) is turned on and cables are securely connected between the  
source and the projector.  
Make sure your computer's video port is enabled. Press the key combination  
4
that activates your laptop's external video port (see step  
image, restart your laptop.  
). If there is still no  
source  
Press the Source button. You may need to press it several times to view the  
correct source.  
Press the Auto Image button.  
If "Signal out of range" is shown, or the picture looks bad  
Press the Auto Image button. If that doesn't help (and the source is a computer),  
reduce your computer's display resolution or vertical refresh rate.  
If the replace lamp light is on  
Turn the projector off and wait at least one minute, then turn it on again. If the  
replace lamp light turns on again, the lamp needs to be replaced. For lamp  
replacement instructions, see the Reference Guide, which is on the included  
CD-ROM or can be downloaded at www.askproxima.com/support  
If the high temperature light is on  
Turn the projector off and remove anything that may be blocking the air vents  
on its side. Leave the projector off for at least one minute to let it cool before  
turning it on again. Important: Continuous operation at high temperature may  
reduce the lifetime of the lamp and/or projector.  
If the service required light is on  
Turn the projector off and wait at least one minute, then turn it on again. If the  
service required light turns on again, the projector needs to be serviced. See  
below for service contact information.  
More troubleshooting options are in the Reference Guide  
The Reference Guide is on the included CD-ROM,  
Warning: In the unlikely event of a lamp rupture, particles may be ejected from the projector.  
Keep out of the area under and around the projector when it is turned on. See the safety  
instructions booklet for more details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Questions? We’re here to help!  
Visit us at:  
We’re here to support you with your new purchase. We can help you with…  
• Determining screen sizes  
• Documentation in other languages  
• Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.)  
• Selecting optional accessories  
• Product warranty protection plans  
USA, Canada, Latin America  
Customer Support Telephone  
+1 (503) 685-8888  
TOLL FREE: 800-799-9911  
Mon-Fri, 7 am - 5 pm Pacific  
Asia Pacific  
Europe, Middle East, Africa  
Customer Support Telephone  
+31 (0)36 539 2820  
Mon-Fri, 08:30 - 18:00 CET  
Customer Support Telephone  
Singapore: +65 63539449  
China: 800.828.2268  
Australia: 1300-725-295  
Australia Direct Sales: 1800-885-841  
Mon-Fri, 9 am - 5 pm SGT  
Warning: Hg - Lamp contains mercury. Manage in accordance with local disposal laws.  
Declaration of Conformity  
Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070-8238 USA  
European Office: Louis Armstrongweg 110, 1311 RL Almere, The Netherlands  
We declare under our sole responsibility that this projector conforms to the following directives and norms: EMC Directive 2004/108/EC,  
EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, Low Voltage Directive 73/23/EEC, Amended by  
93/68/EEC, Safety: IEC 60950-1:1st Edition  
Trademarks  
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered  
trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of  
Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. InFocus, In Focus,  
and INFOCUS (stylized), LP, LiteShow, ScreenPlay, LitePort, ASK and Proxima are either registered trademarks or trademarks of InFocus  
Corporation in the United States and other countries.  
FCC Warning  
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a  
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a  
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own  
expense. Changes or modifications to this equipment that are not expressly approved by InFocus Corp. may void the user’s authority to  
operate the equipment.  
EN 55022 Warning  
This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take  
adequate measures. The typical use is in a conference room, meeting room or auditorium.  
Canada  
This Class A digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.  
Agency Approvals Product Models: W360  
UL, CUL, NOM, IRAM, GOST, C-tick  
Other specific Country Approvals may apply. Please see product certification label.  
InFocus reserves the right to alter product offerings and specifications at any time without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3M Computer Monitor ET 355 User Manual
Acer Personal Computer M1640 User Manual
AEG Washer 70630 User Manual
Agri Fab Lawn Sweeper 45 0352 User Manual
Aiphone Intercom System ACC 3 A User Manual
Aiphone Intercom System TC MC User Manual
Aiphoner YAW R User Manual
Aleratec Computer Accessories 350108 User Manual
Alpine Car Stereo System TME M770 User Manual
Banner American Products Laminator MIGHTYLAM 2700 User Manual