American Standard Indoor Furnishings T970702 User Manual

Installation  
Instructions  
T970.702  
DECK-MOUNT BATH FILLER TRIM KIT  
with EverClean™ Finish  
T970.712  
T970.722  
Congratulations on purchasing your American Standard  
faucet with EverClean finish found only on American  
Standard faucets.  
T970.732  
EverClean Finish  
• One wipe effortlessly removes spots  
• Eliminates the need for cleaners and scrubbing  
• Permanent surface protectant remains beautiful  
for the life of the faucet  
Certified to comply with ANSI A112.18.1  
U.S. Patent No. D403,750  
M968652 Rev. 1.1  
• EverClean™ available on: Polished Chrome, Satin Nickel,  
Stainless Steel, Polished Brass (or any combination of these finishes)  
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.  
Required tools  
3
4
5
1
Phillips Screwdriver  
Screwdriver  
Drill with  
3/16” bit  
REMOVE ALL  
BURRS AND  
BEVEL  
1
2
Hacksaw  
Channel Locks  
2
1"- 1-1/2"  
FINISHED  
DECK  
SPOUT INSTALLATION  
1
Complete FINISHED DECK before trim installation.  
Turn off the water supplies.  
Remove the GUARDS (1) from the VALVES (2). Remove the  
GUARD (3) and 1/4" PLUG (4) from the SPOUT SHANK (5).  
8.4mm  
(21/64")  
The SPOUT SHANK (5) height should be 1" to 1-1/2" above the  
FINISHED DECK. Cut the SPOUT SHANK (5) if necessary. Remove all  
burrs and bevel the end of the shank. Failure to do so may  
damage the SPOUT O-ring during installation and cause water  
leakage.  
3/16" DIA. HOLE  
18.6mm DIA.  
19.8mm  
(23/32")  
Drill a 3/16" hole in the finished deck. See TEMPLATE for location.  
(47/64")  
SPOUT SHANK  
SPOUT  
SHANK  
TEMPLATE FOR  
SPOUT ROLL  
PIN LOCATION  
FRONT  
6
11  
8
3/16" DRILLED  
HOLE  
16  
10  
7
13  
FINISHED  
DECK  
12  
Lubricate the SPOUT ADAPTER O-RING (6) and  
SPOUT O-RING (7).  
15  
9
Push SPOUT ADAPTER (8) on SPOUT SHANK (9)  
and align slot in SPOUT ADAPTER (8) with 3/16"  
drilled hole.  
3/16" DRILLED  
HOLE  
Tighten SPOUT ADAPTER SET SCREW (10) securely  
with 4mm HEX KEY (11).  
Remove the PLUG BUTTON (12) from the SPOUT (13).  
Position the RUBBER RING (14) in the groove in  
the base of the SPOUT (13). Push the SPOUT (13) down  
onto the SPOUT ADAPTER (8) and tighten the  
8
SPOUT  
O-RING  
GROOVE  
SET SCREW (15) securely with the 5mm HEX KEY (16).  
14  
13  
Insert the PLUG BUTTON (12) into the SPOUT (13).  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Acnodes Computer Hardware PC 8172 User Manual
Addonics Technologies Computer Hardware AD2U3PCI User Manual
Advantech Computer Hardware PPC 175T User Manual
Aiwa Radio FR CD1500 User Manual
AKG Acoustics Headphones K77 User Manual
Alto Shaam Oven 1000 SK III User Manual
Audiovox Satellite Radio XMCK 20P User Manual
Avet Reels Fishing Equipment SX 6 4 User Manual
Baldor Electric Pencil Sharpener Baldor User Manual
Beckett Water Gardening Plumbing Product M130AUL User Manual