PENLYN™
WALL-HUNG LAVATORY
VITREOUS CHINA
PENLYN™ WALL-HUNG LAVATORY
• Wall-hung sink
• Vitreous china
• Front overflow
• Integral back splash
• Faucet ledge
Shown with 4801.862 Amarilis Heritage
faucet with Triune Cross handles
(not included)
Faucet holes on 102mm (4") centers:
❏ 0373.027 For wall hanger (included)
❏ 0373.050 For concealed arms support
❏ 0373.950 For concealed arms support
• Less overflow
203 mm
(8)
FINISHED WALL
Nominal Dimensions:
457 x 403mm
88 mm
(3-7/16)
(18" x 15-7/8")
178 mm
(7)
Bowl sizes:
403 mm
(15-7/8)
340mm (13-3/8") wide
216mm (8-1/2") front to back
127mm (5") deep
C/L
Compliance Certifications -
457 mm
(18)
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
54mm (2-1/8) DIA.
HOLES FOR
CONCEALED ARMS
381 mm
(15)
C/L OF HANGER
ANCHORING SLOTS
267 mm
(10-1/2)
HANGER
To Be Specified:
❏ Color: ❏ White
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
102 mm
(4)
3 mm
(1/8)
95 mm
(3-3/4)
102 mm
(4)
175 mm
(6-7/8)
HOLES FOR ANCHOR
SCREWS IN BACK DRAPERY
❏ 1-1/4" Trap:
❏ Nipple:
❏ Concealed Arms Support (by others):
203 mm
(8)
SUPPLIES AS REQUIRED
787 mm
(31)
178 mm
(7)
502 mm
(19-3/4)
*
* See faucet section for additional models available
1-1/4 O.D. WASTE
460 mm
*
(18-1/8)
1-1/4 O.D. TAILPIECE
FINISHED FLOOR
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP
*
ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
M25
© 2008 AS America Inc.
Revised 8/05
Download from Www.Somanuals.com. All Manuals Search And Download.
|