MACKENZIE™ 4-1/2'
RECESS BATH
ENAMELED STEEL
MACKENZIE™ 4-1/2' RECESS BATH
❏ 0138.014 Right hand outlet (Illustrated)
❏ 0139.011 Left hand outlet
Product Features:
• Acid resisting, enameled steel construction
• One-piece recess bath
• Integral apron
• End drain outlet
• Full slip-resistant pattern
• Straight tiling flange
• Fully-bonded support pad
Nominal Dimensions:
1372 x 762 x 381mm
(54" x 30" x 15")
SEE FITTING SPECS
C/L OF
FOR DIMENSION
SUPPLIES
22mm
(7/8)
C/L OF
SHOWER ARM
Compliance Certifications -
19 mm
(3/4)
Meets or Exceeds the Following Specifications:
• ASME A112.19.4 for Enameled Steel Plumbing
Fixtures
OPTIONAL TO FINISHED FLOOR
(USUALLY BETWEEN 1651 mm (65)
& 1981 mm (78)
203 mm
(8)
• ASTM F-462 for Slip-resistant Bathing Facilities
C/L OF
DRAIN
229mmx305mm
(9x12) FLOOR
CUTOUT FOR
DRAIN
1372mm
(54)
FINISHED
WALL
To Be Specified:
❏ Color:
❏ Bath Faucet*:
❏ Faucet Finish:
❏ Drain:
FINISHED
WALL
104mm
(4-1/16)
C/L OF
VALVES
51mm
(2)
378mm
(14-7/8)
C/L OF
SPOUT
25mm
(1)
305mm
(12)
* See faucet section for additional models available
64mm
(2-1/2)
102mm
(4)
19mm
(3/4)
19mm
(3/4)
381mm
(15)
762mm
(30)
ROUGH
FLOOR
PLUMBER NOTE –
PROVIDE SUITABLE SUPPORT AT THIS POINT
PAD
44 mm
(1-3/4)
114 mm
1-1/2 N.P.T.
THREADS
38 mm
(1-1/2)
(4-1/2)
1-1/2 O.D. TAILPIECE
NOTES:
0139.011 LEFT HAND OUTLET (SHOWN).
0138.014 RIGHT HAND OUTLET (REVERSE DIMENSIONS).
SHOWN WITH POP-UP C.D. & O.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
CONCEALED PIPING NOT INCLUDED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4. These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaflet.
H163
© 2008 AS America Inc.
Revised 2/08
Download from Www.Somanuals.com. All Manuals Search And Download.
|