American Standard Hot Tub 0153015 User Manual

SALEM 14™  
RECESS BATH  
ENAMELED STEEL  
BARRIER FREE  
SALEM 14™ RECESS BATH  
0155.017 Right hand outlet  
0153.015 Left hand outlet  
Product Features:  
• Acid resisting, heavy gauge, enameled  
steel one-piece recess bath  
• Integral apron  
• End drain outlet  
• Slip-resistant surface  
• Straight tiling bead  
• Fully-bonded support pad  
Nominal Dimensions:  
1524 x 762 x 356mm  
(60" x 30" x 14")  
Bathing Well Dimensions:  
1346 x 610 x 337mm  
(53" x 24" x 13-1/4")  
OPTIONAL TO FINISHED TO FINISHED  
NOTE: NO CONCEALED  
PIPING FURNISHED  
FLOOR (USUALLY BETWEEN 1651 to  
1981mm ( 65" & 78')  
1/2 S.P.S. OR 1/2"  
C.W.T. SUPPLIES  
SHOWER 1/2" S.P.S.  
711mm  
(28)  
76mm  
(3)  
203mm  
(8)  
229 x 305mm  
(9 x 12") CUTOUT  
Compliance Certifications -  
Meets or Exceeds the Following Specifications:  
• ASME A112.19.4 for Enameled Steel Plumbing  
Fixtures  
19mm  
(3/4)  
FINISHED  
197mm  
(7-3/4)  
WALL  
C/L OF DRAIN  
C/L OF SHOWER CURTAIN ROD  
(USUALLY 1930mm (76")  
FROM FIN. FLOOR)  
• ASTM F-462 for Slip-resistant Bathing Facilities  
FINISHED  
1524mm  
(60)  
C/L OF VALVES  
102mm  
WALL  
(44mm [1-3/4"]  
(8)  
DIA. HOLES)  
102  
(4)  
365mm  
(14-3/8)  
To Be Specified:  
Color:  
Bath Faucet*:  
Faucet Finish:  
Drain: 1583.470  
SPOUT  
305mm  
1/2" S.P.S.  
(12)  
102 (4)  
FINISHED  
WALL  
356mm  
ROUGH  
FLOOR  
(14)  
19mm  
(3/4)  
762mm  
(30)  
1-1/2 N.P.T.M. THREADS  
1-1/2 O.D. TAILPIECE  
13mm  
(1/2)  
* See faucet section for additional models available  
PLUMBER NOTE:  
PROVIDE SUITABLE FULL LENGTH  
SUPPORT AT THIS POINT.  
SUMP PAD  
NOTES:  
0153.015 LEFT HAND OUTLET (SHOWN).  
0155.017 RIGHT HAND OUTLET (REVERSE DIMENSIONS).  
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH FOR  
ADDITIONAL INFORMATION.  
SHOWN WITH POP-UP C.D. & O.  
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.  
CONCEALED PIPING NOT INCLUDED.  
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES  
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND  
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.  
INSTALL WITH SEAT AT HEAD END.  
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range  
of tolerances established by ANSI Standard A112.19.4. These measurements  
are subject to change or cancellation. No responsibility is assumed for use of  
superseded or voided leaflet.  
H162  
© 2008 AS America Inc.  
Revised 2/08  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3M Paint Sprayer 05 de 3M User Manual
Abocom Switch HSM1401 User Manual
Adcom Stereo Amplifier GTP 830 User Manual
Addonics Technologies Copier DGC11 User Manual
ADTRAN Network Card 3125 User Manual
AEG Freezer AGN71800F0 User Manual
Aiwa Stereo System CX NA31 User Manual
Avital Automobile Alarm Model 4300 User Manual
Bahco Tool Storage MS7056ENG User Manual
Behringer Car Speaker B412DSP User Manual