™
Q-D6
Professional Preamp Mixer
American Audio
4295 Charter Street
Los Angeles Ca. 90058
Rev. 2/05
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Electrical Safety Precautions
ELECTRICAL PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product'senclosurethatmaybeofsufficientmagnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR BACK).
THERE ARE NO USER SERVICEABLE PARTS
INSIDE REFER SERVICE TO YOUR AUTHORIZED
AMERICAN AUDIO® SERVICE TECHNICIAN.
IMPORTANT SAFETY INSTRUCTIONS
OBJECT AND LIQUID ENTRY - Never push objects of
READ INSTRUCTIONS — All the safety and operating
GROUNDING OR POLARIZATION
instructions should be read before the product is
operated.
•
Ifthisproductisequippedwithapolarizedalternating
current line plug (a plug having one blade wider than
theother), itwillfitintotheoutlet onlyoneway. This
isasafetyfeature.Ifyouareunabletoinserttheplug
fullyintotheoutlet, tryreversingtheplug. Iftheplug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
RETAIN INSTRUCTIONS — The safety and operating
instructionsshouldberetainedforfuturereference.
HEED WARNINGS — All warnings on the product and
in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS — All operating and use
instructions should be followed.
SERVICING — Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
CLEANING — The product should be cleaned only with
a polishing cloth or a soft dry cloth. Never clean with
furniture wax, benzine, insecticides or other volatile
liquids since they may corrode the cabinet.
•
If this product is equipped with
a
three-wire
DAMAGEREQUIRINGSERVICE - Unplugthisproduct
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
groundingtypeplug,aplughavingathird(grounding)
pin, itwillonlyfitintoagroundingtypepoweroutlet.
Thisisasafetyfeature.Ifyouareunabletoinsertthe
plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the grounding type plug.
•
•
When the power-supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into
the product.
ATTACHMENTS
—
Do not use attachments not
recommendedbytheproductmanufacturerasthey
may cause hazards.
WATER AND MOISTURE — Do not use this product
near water — for example, near a bathtub, wash
bowl,kitchensink,orlaundrytub;inawetbasement;
or near a swimming pool; and the like.
ACCESSORIES — Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only
•
•
If the product has been exposed to rain or water.
Iftheproductdoesnotoperatenormallybyfollowing
theoperatinginstructions.Adjustonlythosecontrols
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its
normal operation.
POWER-CORD PROTECTION - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs,conveniencereceptacles,andthepointwhere
they exit from the product.
OUTDOOR ANTENNA GROUNDING — If an outside
antennaorcablesystemisconnectedtotheproduct,
be sure the antenna or cable system is grounded so
astoprovidesomeprotectionagainstvoltagesurges
andbuilt-upstaticcharges.Article810oftheNational
ElectricalCode,ANSI/NFPA70,providesinformation
with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and
requirementsforthegroundingelectrode.SeeFigure
A.
LIGHTNING — For added protection for this product
duringalightningstorm,orwhenitisleftunattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product
due to lightning and power-line surges.
POWER LINES —An outside antenna system should
notbelocatedinthevicinityofoverheadpowerlines
or other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
OVERLOADING — Do not overload wall outlets,
extensioncords,orintegralconveniencereceptacles
as this can result in a risk of fire or electric shock.
•
•
If the product has been dropped or damaged in any
way.
When the product exhibits a distinct change in
performance — this indicates a need for service.
with
a
cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
REPLACEMENT PARTS -- When replacement parts
arerequired,besuretheservicetechnicianhasused
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorizedsubstitutionsmayresultinfire,electric
shock, or other hazards.
SAFETY CHECK - Upon completion of any service or
repairs to this product, ask the service technician to
performsafetycheckstodeterminethattheproduct
is in proper operating condition.
WALL OR CEILING MOUNTING — The product should
not be mounted to a wall or ceiling.
HEAT —The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
CART — A product and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn.
VENTILATION — Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
POWER SOURCES —This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of
power supply to your home, consult your product
dealer or local power company.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
LOCATION – The appliance should be installed in a
stable location.
NONUSE PERIODS – The power cord of the appliance
should be unplugged from the outlet when left un-
used for a long period of time.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Fig. A
NEC — NATIONAL ELECTRICAL CODE
©American Audio®
-
-
Q-D6™ Instruction Manual Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Safety Precautions
8. Never plug this mixer in to a dimmer pack.
1. For adult use only - Keep out of the reach
of children.
9. Do not let insecticides, benzene, or thinner
come in contact with the surface of the unit.
2. Water and Moisture - The player should not
be used near water - for example, near a bath
tub, kitchen sink, laundry tub, in a wet base-
ment or near a swimming pool, etc. Do not
spill water or other liquids in to or on to your
mixer.
10. This unit is intended for indoor use only, use
of this product outdoors voids all warranties.
11. Always mount this unit in safe and stable
matter.
12. Disconnect from main power before making
any type of connection.
3. Ventilation - The Mixer should be situated
so that its location or position does not inter-
fere with its proper ventilation. For example,
the Mixer should not be situated on a bed,
sofa, rug, or similar surface that may block the
ventilation openings; or, placed in a built-in
installation, such as a bookcase or cabinet that
may impede the flow of air through the ventila-
tion openings.
13. Cleaning - The mixer should be cleaned
only as recommended by the manufacturer.
Use a soft cloth to wipe down the outside of the
unit. For stubborn stains moisten a soft cloth
with glass cleaner or other mild detergent to
wipe away any stains. Use a soft cloth to wipe
any residual cleaner. Never use volatile clean-
ers such as benzene, solvent, or thinner to clean
your unit, these cleaners will damage the units
surface.
4. Heat - The Mixer should be situated away
from heat sources such as radiators, heat reg-
isters, stoves, or other appliances (including
amplifiers) that produce heat.
14. Handle the power supply cord carefully. Do
not damage or deform; it may cause electric
shock or malfunction when used. Hold plug
attachment when removing from wall outlet.
Do not pull on the cord.
5. Power Sources - The Mixer should be con-
nected to a power supply (wall outlet) only of
the type described in the operating instructions
or as marked on the Mixer.
15. To avoid electric shock, do not open the
top cover when the unit is plugged in. If prob-
lems occur with the unit, call American Audio®
customer support.
6. Servicing -The user should not attempt to
service the Mixer beyond that described in the
operating instructions. There are no user ser-
viceable parts inside. All other servicing should
be referred to qualified service personnel. The
Player should be serviced by qualified service
personnel when:
16. Do not place metal objects or spill any liq-
uids inside or on the mixer. Electric shock or
malfunction may occur.
A. The power-supply cord or the plug has
been damaged.
B. Objects have fallen, or liquid has been
spilled into the Mixer.
C. The Mixer has been exposed to rain
or water.
D. The Mixer does not appear to operate
normally or exhibits a marked change
in performance.
17. Power Cord Protection - Power supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the
mixer. Route your power cord out of the way of
foot traffic.
18. Always have the front gain controls set to
their lowest level during initial power-up to pre-
vent speaker damage.
7. Never disassemble or modify your unit in
any way, doing so will void your manufactures
warranty.
©American Audio®
-
-
Q-D6™ Instruction Manual Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Introduction
Introduction:
Congratulations and thank you for purchasing the American Audio® Q-D6™ mixer. This mixer is a rep-
resentation of American Audio’s continuing commitment to produce the best and highest quality audio
products possible at an affordable price. The Q-D6™ comes with a 2 year limited warranty! Please
read and understand this manual completely before attempting to operate your new mixer. This book-
let contains important information concerning the proper and safe operation of your new mixer.
Customer Support:
American Audio® provides a toll free customer support line, to provide set up help and to answer any
question should you encounter problems during your initial set up or operation. You may also visit us
through Friday 9:00 a.m. to 5:30 p.m. Pacific Standard Time.
Voice:
Fax:
(800) 322-6337
(323) 582-2610
E-mail:
Caution! There are no user serviceable parts inside this mixer. Do not attempt any repairs yourself,
doing so will void your manufactures warranty. In the unlikely event your mixer may require service,
please contact American Audio® customer support.
Do not discard the packing carton in the trash. Please recycle when ever possible.
Q-D6™
Set-Up Precautions
Please be sure to make any connections before plugging the mixer in to an electrical outlet. All fader
and volume controls should be set to zero or minimum position, before the mixer is switched on. If the
mixer has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch on
the mixer immediately. The arising condensation of water might damage your device. Leave the device
switched off until it has reached room temperature.
Operating Determinations:
• When installing this mixer, please make sure that the device is not exposed or will not be
exposed to extreme heat, moisture or dust!
• Do not operate the mixer in extremely hot (more than 30°/100°F) or extremely cold (less than
5°C/40°F) surroundings.
• Keep the unit out of direct sunlight and away from heaters.
• Operate the mixer only after becoming familiar with its functions. Do not permit operation by
persons not qualified for operating the mixer. Most damages are the result of unprofessional
operation!
• Do not attempt to operate this mixer if the power cord has been frayed or damaged.
• Disconnect from main power before making any type of connection.
• Do not attempt to operate this mixer, if it becomes damaged in any way.
• Never operate this mixer when it’s covers are removed.
• To reduce the risk of electrical shock or fire, do not expose this mixer to rain or moisture.
• This mixer is intended for indoor use only, use of this product outdoors voids all warranties.
• During long periods of non-use, disconnect the mixer’s main power.
©American Audio®
-
-
Q-D6™ Instruction Manual Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Unpacking
Every Q-D6™ has been thoroughly tested and has been shipped in perfect operating condition. Care-
fully check the shipping carton for damage that may have occurred during shipping. If the carton
appears to be damaged, carefully inspect your mixer for any damage and be sure all equipment nec-
essary to operate the mixer has arrived intact. In case damage has been found or parts are missing,
please contact our toll free customer support number for further instructions, please do not return the
mixer to your dealer.
Q-D6™
Quick start instructions
American Audio would like to thank for your purchase of this great product. For those of you that are to
impatient to read the entire user manual we have compiled these quick start instructions. We hope that
you will at least read through these instructions to familiarize yourself with the basic understanding of
the unit. The Q-D6 is part of American Audio’s continuing evolution in audio technology. This unit has
been built and designed with the typical DJ in mind, by DJ’s. We have attempted to provide you with
the most reliable product on the market by using only components made from quality products.
MASTER LEVEL - Use this level control to set your volume output. Try never to send an output of
more than +4dB to your system. Signal at levels higher than this will start to distort and may cause
damage to your system and speakers. Remember that a distorted signal from you mixer will only be
multiplied throughout your system.
CHANNEL GAIN LEVEL - The channel trim levels are not to be used as volume controls, never use the
channel gain to set the output volume. These controls are used to aid in distortion control. Use these
control to preset your signal level before the crossfader. With your channel faders in the maximum
position, use the channel trim level to set an average output level of about +4dB on you master level
meter.
HEADPHONES - To avoid sever hearing damage, always be sure the headphone level is set to mini-
mum before plugging them in. Never put the headphone on without making sure the headphone level
is turned down.
MIC - The mic connector uses a 1/4” jack unbalanced connector. The DJ mic has an independent
volume control. When feedback occurs when using the mic, try lowering the “low” level this may
reduce the feedback. Always leave the mic level to it’s minimum level when not in use.
Q-START FEATURE - This function works in conjunction with a compatible American Audio or Ameri-
can DJ “Q”Start CD player. When used with a compatible CD player, you can use the crossfader to
start and stop the CD Player with the slide of the fader. The ON/OFF “Q ”START switch activates this
FADER “Q ”START feature.
©American Audio®
-
-
Q-D6™ Instruction Manual Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Controls and Features
Top Panel
15
14
1
2
3
4
5
13
6
7
8
9
12
11
10
1. SOURCE SELECTOR SWITCH - These switches are used to select the input source assigned to
each channel. Each channel may only be assigned one input source at a time. This switch must be in
the “phono” position for turntable operation.
2. POWER L.E.D. - This L.E.D. will glow when the power is switched on.
3. CHANNEL GAIN CONTROL - This adjustment is used to adjust an audio source signal input gain
for a channel. Never use the gain control to adjust output volume. Setting the gain level properly will
ensure a clean output signal. To properly set the gain level controls:
1. Be sure the MASTER VOLUME CONTROL (4) is set to level 4.
2. Set the CHANNEL FADER (9) to level 8.
3. Begin playback on an audio source connected to the channel you are adjusting.
4. Use the Gain Control (3) to adjust an average output volume of +4 dB.
5. Repeat this step for all channels
4. MASTER VOLUME CONTROL - This rotary knob is used to control the master output level (volume).
To avoid distorted output try to maintain an average output signal level +4 dB. Be sure this volume
©American Audio®
-
-
Q-D6™ Instruction Manual Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Controls and Features Cont.
control is always set to zero before turning the unit on.
5. CUE LEVEL VOLUME CONTROL - This knob is used to adjusts the headphone volume output
level. Turn the knob in a clockwise direction to increase the headphone volume.
6. CUE MIXING CONTROLLER - This knob selects the channel for monitoring. The monitor signal
comes from the Prefader. This means it will not be affected by the channel faders. You can monitor
each channel individually. Connect your headphones to the HEADPHONES JACK (28). Turn the CUE
MIXING CONTROL to CUE and select the desired channels with the Cue buttons. When you turn the
CUE MIXING CONTROL to PGM (PFL switches without function), you can cue the output signal of the
mixer. If the CUE MIXING CONTROL is set to the center position, you can cue both the channel signal
you selected and the output signal. With the CUE LEVEL control, you can adjust the phones volume
without changing the output signal.
7. CHANNEL EQUALIZER - All of the channels include a three-band signal EQ. These controls are
used to increase or decrease the LOW’s, MID’s, and HI’s of the output signal.
CHANNEL TREBLE CONTROL - This knob is used to adjust the treble levels of a channel
allowing for a maximum treble gain of 9dB or maximum decrease of -26dB. Turning the knob
in a counter-clockwise direction will decrease the amount of treble applied to a channel signal,
turning the knob in a clockwise direction will increase the amount of treble applied to a channel
signal.
CHANNEL MIDRANGE CONTROL - This knob is used to adjust the midrange levels of a
channel allowing for a maximum midrange gain of 9dB or maximum decrease of -26dB.
Turning the knob in a counter-clockwise direction will decrease the amount of midrange app-
lied to a channel signal, turning the knob in a clockwise direction will increase the amount
of midrange applied to a channel signal.
CHANNEL BASS CONTROL - This knob is used to adjust the low frequency levels of a
channel allowing for a maximum bass gain of 9dB or maximum signal decrease of -26dB.
Turning the knob in a counter-clockwise direction will decrease the amount of bass applied to
a channel signal, turning the knob in a clockwise direction will increase the amount of bass
applied to a channel signal.
8. CUE BUTTONS - These buttons are used to activate a channels “CUE” mode. A red LED on
the Cue button will glow when that channels cue mode is activated. Cue mode will send a channels
incoming signal to the headphones. The cue level is adjusted by the CUE LEVEL VOLUME KNOB
(5). Be sure the cue level is set to minimum before putting a pair of headphones on. Be sure the CUE
MIXING KNOB (6) is turned to the “CUE” position to hear the selected channel source.
9. CHANNEL FADER - These faders are used to control the output signal of any source assigned to
its particular channel.
10. FEATHER FADER PLUS CROSSFADER - This fader is used to blend the output signals of chan-
nels one and three together. When the fader is in the full left position (channel 1), the output signal of
channel one will be controlled by the master volume level. The same fundamentals will apply for chan-
nel three. Sliding the fader from one position to another will vary the output signals of channels one
and three respectively. When the crossfader is set in the center position, the output signals of both the
channels one and channels three will be even. The Channel two fader will work when the crossfader is
any position.
11. Q-START ON/OFF SWITCH - This function works in conjunction with a compatible American
©American Audio®
-
-
Q-D6™ Instruction Manual Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Controls and Features Cont.
Audio® or American DJ® “Q” Start CD player. When used with a compatible CD player, you can use the
crossfader to start and stop the CD play. The ON/OFF “Q” START switch activates the fader “Q” start
feature. When the fader “Q” start feature is activated sliding the CROSSFADER (10) from left to right
will play or cue any CD player connected to the CONTROLLER JACKS (16) on the rear of the unit.
For example, connect a compatible dual CD player connect to mixer channels one and two
(refer to your CD player manual for proper set-up). Be sure the Fader “Q” Start feature is
activated on both channels. Slide the crossfader to the channel one position (full left) and
begin playback on CD drive one. Slide the crossfader to the channel position (far right). This
will immediately trigger the play function on CD drive two and return CD drive one to cue
mode. To return to normal fader operation turn the Fader “Q” Start ON/OFF SWITCH to the
OFF position.
12. CHANNEL 2: AUX 2 JACK - This Aux input is for the use of a Mp3 player. Input volume will be
controlled by the channel two fader.
13. MICROPHONE SECTION - These controls are used to adjust the microphone volume level, treble
level, and bass levels.
MICROPHONE VOLUME - This knob is used to regulate the microphone output volume. Turn-
ing the knob in a clockwise direction will increase the volume level.
MICROPHONE TREBLE CONTROL - This knob is used to adjust the treble levels of the
Microphone with a maximum signal gain of 10dB or maximum signal decrease of -10dB.
Turning the knob in a counter-clockwise direction will decrease the amount of treble
applied to the microphone signal, turning the knob in a clockwise direction will increase
the amount of treble applied to microphone signal.
MICROPHONE BASS CONTROL - This knob is used to adjust the low frequency levels of
the microphone with a maximum signal gain of 10dB or maximum signal decrease of -10dB.
Turning the knob in a counter-clockwise direction will decrease the amount of bass applied to
the microphone signal, turning the knob in a clockwise direction will increase the amount
of bass applied to microphone signal.
14. TALKOVER CONTROL - This function decreases all signal output except for the microphone
signal.
15. MASTER VOLUME LEVEL INDICATORS - The dual MASTER LEVEL LED indicators are used to
detail the master output level. The meters will detail the output level of both the left and right chan-
nels.
©American Audio®
-
-
Q-D6™ Instruction Manual Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Controls and Features Cont.
16
17
27
26
25
24
23
22 21
20 19 18
17
16. PLAYER CONTROL - These jacks are used to control the “Q-Start” function between the mixer
and a compatible American Audio CD Player. Input mini plugs from CD player controller into these
jacks, input CD 1 into jack A and CD 2 into jack B.
17. GND (GROUND TERMINAL) - Connect each of your turntables ground leads to either of the two
ground terminal. This will reduce the humming and popping noises associated with magnetic phono
cartridges.
18. CHANNEL 1: PHONO 1 INPUT JACKS - Connect turntables equipped with MM pickup cartridge
to PHONO inputs (All DJ turntable use MM pick-up cartridges). The red colored RCA jack represents
the right channel input and the white represents the left channel input.
19. CHANNEL 1: LINE 1 RCA INPUT JACKS - DO NOT CONNECT TURNTABLES TO THESE JACKS!
These Jacks are used for line level inputs. Connect CD players or Tape Decks to LINE inputs. Line level
musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be con-
nected to LINE inputs. Turntables should only be connected to “Phono” inputs. The red colored RCA
jack represents the right channel input and the white represents the left channel input.
20. CHANNEL 2: LINE 2 RCA INPUT JACKS - DO NOT CONNECT TURNTABLES TO THESE JACKS!
These Jacks are used for line level inputs. Connect CD players or Tape Decks to LINE inputs. Line level
musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be con-
nected to LINE inputs. Turntables should only be connected to “Phono” inputs. The red colored RCA
jack represents the right channel input and the white represents the left channel input.
21. CHANNEL 3: PHONO 2 INPUT JACKS - Connect turntables equipped with MM pickup cartridge
to PHONO inputs (All DJ turntable use MM pick-up cartridges). The red colored RCA jack represents
the right channel input and the white represents the left channel input.
22. CHANNEL 3: LINE 3 RCA INPUT JACKS - DO NOT CONNECT TURNTABLES TO THESE JACKS!
These Jacks are used for line level inputs. Connect CD players or Tape Decks to LINE inputs. Line level
©American Audio®
-
-
Q-D6™ Instruction Manual Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Controls and Features Cont.
musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be con-
nected to LINE inputs. Turntables should only be connected to “Phono” inputs. The red colored RCA
jack represents the right channel input and the white represents the left channel input.
23. REC OUT - This is a low current unbalanced output source designed for various tape and CD
recorders. The Record Out (REC OUT) level is dictated by the CHANNEL FADER LEVEL (9), it is not
influenced by the MASTER VOLUME CONTROL (4).
24. RCA MASTER OUTPUTS - The Master Output includes a pair of RCA UNBALANCED JACKS (24).
The RCA jacks send a low current unbalanced output signal.
25. BALANCED XLR MASTER OUTPUTS - The Master Output includes a pair XLR Balanced
JACKS as well as a pair RCA UNBALANCED JACKS (24). The 3-pin XLR jacks send a high current
balanced output signal. These jacks should be used when you will be driving an amp or other audio
equipment with a balanced input, or whenever you will be running a signal line greater than 15 feet.
Always, use these jacks whenever possible.
26. 9V AC INPUT - Connect the included power supply to this input, or any other 9v power adapter.
27. MAIN POWER SWITCH - This is the main power ON/OFF button. An L.E.D. located on the front
of the mixer will glow green when the power is ON. Before main power is applied, be sure you have
made all connections to the mixer. Also be sure your amplifier(s) is(are) tuned off. Remember to avoid
damaging pops, the mixer should be powered on first and turned off last.
29
28
28. HEADPHONE OUTPUT JACK - This jack is used to connect your headphones to the mixer allow-
ing you to monitor the cue source. Use headphones only rated at 8 ohms to 32 ohms. Most DJ head-
phones are rated at 16 ohm, these are highly recommended. Always be sure the CUE LEVEL VOLUME
(5) is set to minimum before you put the headphones on.
29. MICROPHONE CONNECTOR - This jack is used to a connect a microphone to the mixer. Con-
nect you microphone via 1/4 inch (6.3mm) jack. The signal volume will be controlled by the MIC LEVEL
(13). The bass and treble levels can also be adjusted by the built-in MICROPHONE EQ (13).
©American Audio®
-
-
Q-D6™ Instruction Manual Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Typical Mixer Set-Up
OFF
ON
POWER
1
2
3
4
5
6
7
8
9
0
T
AUTO
CUE BPM
BEAT SYNC.
PROGRAM
NONSTOP
KEY
LOCK
PARAMETER TIME
CUE
ELAPSED TOTAL REMAIN
EJECT
SINGLE
LOOP
BPM
RELOOP
M
S
F
PITCH
PARAMETER RATIO
SCRATCH
FILTER
HOLD
ECHO
TRANS
FX SELECT
SGL/CTN
TIME
REV.PLAY
SKID
PHASE
FLANGER
PAN
TEMPO
LOCK
ON/OFF
4%/8%/16%
CASSETTE DECK
BOP
SAMPLE PITCH
FX
MIX
ENTER
TURNTABLE
TURNTABLE
©American Audio®
-
-
Q-D6™ Instruction Manual Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Typical Mixer Output Connections Set-Up
RCA to RCA Patch Cables
RCA to 1/4” Patch Cables
CASSETTE DECK
Speaker Cables
©American Audio®
-
-
Q-D6™ Instruction Manual Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Cleaning
Due to fog residue, smoke, and dust, cleaning the mixer should be carried out periodically to residue
build up.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Use a cleaner specially designed for electronics to spray in and around the knobs and switch.
This will reduce small particle built up that can effect the proper operation of the mixer.
3. Clean should be carried out every 30-60 days.
4. Always be sure to dry all parts completely before plugging the mixer in.
Cleaning frequency depends on the environment in which the mixer operates (i.e. smoke, fog residue,
dust, dew).
Q-D6™
Cross Fader Replacement
The crossfader is “Hot Swapable” which means it may be replaced at any time, even when power is
applied. Only replace with American Audio Part Feather Fader Plus. Replacing with any other model
fader may seriously damage your mixer.
Replacing the Crossfader:
1. Disconnect the mixers main power supply
2. Using a Phillips screw driver, unscrew the two stainless steel retaining screws that hold the
crossfader in place.
3. Gently remove the crossfader from its seated position. You may need to wiggle the crossfader
slightly to remove it.
4. After removing the crossfader, disconnect the ribbon cable that attaches the crossfader to the
PC board. Grasp the crossfader by its base and pull the ribbon cable by its connector not the
actual cables. The connector is designed to only fit one way, so don’t worry about the connec-
tors orientation.
5. Connect the new crossfader to the ribbon cable and replace in reverse order.
©American Audio®
-
-
Q-D6™ Instruction Manual Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Registration
The Q-D6™ carries a one year (365 days) limited warranty. Please fill out the enclosed warranty card to validate
your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accom-
pany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return
package. A brief description of the problem as well as the R.A. number must also be written down on a piece
of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your
proof of purchase invoice. You may obtain a R.A. number by contacting customer support at (800) 322-6337.
Q-D6™
Warranty
1-YEAR LIMITED WARRANTY
A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be free
of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date
of purchase. This warranty shall be valid only if the product is purchased within the United States of
America, including possessions and territories. It is the owner’s responsibility to establish the date and
place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service, send the product only to the American Audio® factory. All shipping charges
must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms
of this warranty, American Audio® will pay return shipping charges only to a designated point within
the United States. If the entire instrument is sent, it must be shipped in its original package. No acces-
sories should be shipped with the product. If any accessories are shipped with the product, American
Audio® shall have no liability whatsoever for loss of or damage to any such accessories, nor for the
safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified in
any manner which American Audio® concludes, after inspection, affects the reliability of the product;
if the product has been repaired or serviced by anyone other than the American Audio® factory unless
prior written authorization was issued to purchaser by American Audio®; if the product is damaged
because not properly maintained as set forth in the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning or peri-
odic check-up. During the period specified above, American Audio® will replace defective parts at
its expense, and will absorb all expenses for warranty service and repair labor by reason of defects
in material or workmanship. The sole responsibility of American Audio® under this warranty shall be
limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of
American Audio®. All products covered by this warranty were manufactured after January 1, 1990, and
bear identifying marks to that effect.
E. American Audio® reserves the right to make changes in design and/or improvements upon its prod-
ucts without any obligation to include these changes in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory sup-
plied with products described above. Except to the extent prohibited by applicable law, all implied
warranties made by American Audio® in connection with this product, including warranties of mer-
chantability or fitness, are limited in duration to the warranty period set forth above. And no warran-
ties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to
this product after said period has expired. The consumer’s and or Dealer’s sole remedy shall be such
repair or replacement as is expressly provided above; and under no circumstances shall American
Audio® be liable for any loss or damage, direct or consequential, arising out of the use of, or inability
to use, this product.
G. This warranty is the only written warranty applicable to American Audio® Products and supersedes
all prior warranties and written descriptions of warranty terms and conditions heretofore published.
©American Audio®
-
-
Q-D6™ Instruction Manual Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-D6™
Specifications
Model: Q-D6, Professional 3 Channel Preamp Mixer
POWER SUPPLY:
DIMENSIONS:
WEIGHT:
AC9V, 1000mA
10”W x 12.25”D x 3.25”H /254 x 308 x 82.5 mm
7 Lbs. / 3.2 Kg
CROSSFADER:
Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
5W typical, 7W w/ full headphone output
32 Ohms
POWER CONSUMPTION:
HEADPHONE IMPEDANCE:
ENVIRONMENTAL CONDITION:Operating Temperature: 5 to 35 deg. C; Humidity: 25 to 85%
RH (non-condensing); Storage Temperature: -20 to 60 ˚C
Input Sensitivity (Level/Impedence): LOAD=100K OHM
LINE, AUX:
PHONO:
MICROPHONE:
-14dB (200mV)/10K Ohms ±2dB
-50dB (3.16mV)/47K Ohms ±2dB
-60dB (1mV) /2.2K Ohms ±2dB
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms, LOAD=100K OHM
MASTER OUT (XLR):
MASTER OUT (RCA):
REC OUT (RCA):
600 Ohms / +4dB (1.23V) +/-2dB
1K Ohms
-10dB (316mV)/2.2K Ohms ±2dB
0dB (1V)/33 Oms ±2dB (Cue Mixing at Center)
PHONES (LOAD=32 OHMS):
Maximum Output (Load = 100K, THD = 1%)
MASTER (RCA):
MORE THAN 18dB (8V)
PHONES (Load=32 ohms):
MORE THAN 4dB (1.6V)
CHANNEL BALANCE:
Within 3dB
Frequency Response:
LINE, AUX:
20Hz - 20KHz, +/-2dB
PHONO:
MICROPHONE:
20Hz - 20KHz, +2/-3dB (RIAA)
20Hz - 20KHz, +1.5/-3dB
Output Noise (MAX. GAIN, EQ FLAT, W/ 20KHz LPF, A-WEIGHTED):
LINE/AUX:
PHONO:
MIC:
MORE THAN 90dB
MORE THAN 72dB
MORE THAN 62dB
THD - Total Harmonic Distortion (20Khz, 0dB Output):
LINE:
Less than 0.015% 20-20KHz
CROSS TALK:
LINE, AUX:
MORE THAN 65dB AT 1KHz between L and R
MORE THAN 70dB AT 1KHz between Channels
Channel Equalizer:
BASS:
MID:
9 +/-2dB at 70Hz / -25 +/-3dB at 70Hz
9 +/-2dB at 1KHz / -27 +/-4dB at 1KHz
9 +/-2dB at 13KHz / -15 +/-3dB at 13KHz
TREBLE:
Microphone Equalizer:
BASS:
TREBLE:
10 +/-2dB at 1000Hz / -10 +/-2dB at 100Hz
10 +/-2dB at 10KHz / -10 +/-2dB at 10KHz
©American Audio®
-
-
Q-D6™ Instruction Manual Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
©American Audio®
A Division of the American DJ Group of Companies
4295 Charter Street
Los Angeles, CA 90058 USA
Tel: 323-582-2650 Fax: 323-582-2610
Download from Www.Somanuals.com. All Manuals Search And Download.
|