Owner's Manual
Covering Model ARR6420
Contents
Important Safety Information ......... 3
Cookware Suggestions ................. 6
Using the Range............................ 7
Displays and Sounds ..................... 8
Custom Features ........................... 9
Using the Oven Control ............... 10
Cooking
Baking ...................................... 14
Broiling ..................................... 17
Electric Range
Keep instructions for future reference.
Be sure manual stays with range.
Roasting ................................... 18
Braising .................................... 19
Care and Cleaning....................... 20
Troubleshooting ........................... 22
Amana Warranty ......................... 24
Part No.36-31986101-0
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
WARNING
WARNING
!
!
To reduce risk of the appliance tipping, it must be secured by a
properly installed anti-tip bracket(s). To verify bracket has been
installed properly, remove the storage drawer or panel and look under
the range with a flashlight. Bracket(s) must be engaged in the rear
corner of the range.
To avoid personal injury, do not
sit, stand or lean on oven door
or oven drawer.
• ALL RANGES CAN TIP
WARNING
!
To avoid risk of electrical shock,
personal injury, or death, verify
your range has been properly
grounded and always
• INJURY TO PERSONS
COULD RESULT
disconnect it from main power
supply before servicing.
• INSTALL ANTI-TIP
BRACKET(S) PACKED
WITH RANGE
• REFER TO
INSTALLATION
INSTRUCTIONS
California Safe Drinking Water
and Toxic Enforcement Act
(Proposition 65)
The Governor of California is required
to publish a list of substances known
to the state of California to cause
cancer or reproductive harm and
requires businesses to warn
customers of potential exposures to
such substances.
CAUTION
!
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS—Surface
units may be hot though they are dark in color. Areas near surface units
may become hot enough to cause burns. During and after use, do not
touch, or let clothing or other flammable materials contact surface units
or areas near surface units until they have had enough time to cool.
These areas include the rangetop and backguard.
Some appliances contain or produce
a chemical or chemicals which can
cause death or serious illness and
which are known to the State of
California to cause cancer, birth
defects, or other reproductive harm.
To reduce the risk from substances
during the self-clean cycle make sure
this appliance is installed, operated,
and maintained according to the
manufacturer’s instructions.
CAUTION
!
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF
OVEN—Oven heating elements may be hot though they are dark in color.
Interior surfaces of an oven may become hot enough to cause burns.
During and after use, do not touch, or let clothing or other flammable
materials touch heating elements or interior surfaces of oven until they
have had enough time to cool. Other range surfaces that may become
hot enough to cause burns are the oven door, oven cavity, and oven vent.
SAVE THESE INSTRUCTIONS
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
(cont'd)
ALL APPLIANCES
SURFACE
COOKING
UNITS
1. Proper Installation—Be sure
your appliance is properly
installed and grounded by a
qualified technician.
1. Use Proper Pan
Size—This appliance is
2. Never Use Your Appliance for
Warming or Heating the
equipped with one or more surface units of
different sizes. Select utensils having flat bottoms
large enough to cover the surface unit heating
element. The use of undersized utensils will
expose a portion of the heating element to direct
contact and may result in ignition of clothing. Use
of oversized utensils concentrates heat on cooking
surface and can cause damage to range. Proper
relationship of utensil to burner improves efficiency.
2. Never Leave Surface Units Unattended—Boilover
causes smoking and greasy spillovers that may
ignite.
3. Make Sure Reflector Pans or Drip Bowls Are in
Place—Absence of these pans or bowls during
cooking may subject wiring or components
underneath to damage.
4. Protective Liners—Do not use aluminum foil to line
surface unit drip bowls or oven bottom, except as
suggested in the manual. Improper installation of
these liners may result in a risk of electric shock, or
fire.
Room.
3. Do Not Leave Children
Alone—Children should not be alone or
unattended in the area where the appliance is in
use. They should never be allowed to sit or stand
on any part of the appliance.
4. Wear Proper Apparel—Loose fitting or hanging
garments should never be worn while using
appliance.
5. User Servicing—Do not repair or replace any part
of the appliance unless specifically recommended
in the manual. All other servicing should be
referred to a qualified technician.
6. Storage in or on Appliance—Flammable materials
should not be stored in an oven or near surface
units.
7. Do Not Use Water On Grease Fires—Smother fire
or flame, or use dry chemical or foam-type
extinguisher.
8. Use Only Dry Potholders—Moist or damp
potholders on hot surfaces may result in burns
from steam. Do not let potholder touch elements.
Do not use a towel or other bulky cloth.
5. Glazed Cooking Utensils—Only certain types of
glass, ceramic, earthware, or other glazed utensils
are suitable for rangetop service without breaking
due to sudden change in temperature.
6. Utensil Handles Should Be Turned Inward and Not
Extended Over Adjacent Surface Units—To reduce
the risk of burns, ignition of flammable materials,
and spillage due to unintentional contact with the
utensil, the handle of a utensil should be positioned
so that it is turned inward, and does not extend over
adjacent surface units.
7. Do Not Soak Removable Heating Elements—
Heating elements should never be immersed in
water.
CAUTION
!
Do not store items of interest to children in
cabinets above a range or on the backguard of a
range—children climbing on the range to reach
items could be seriously injured.
SAVE THESE INSTRUCTIONS
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
(cont'd)
OVENS
In Case of Fire
Fires can occur as a result of over cooking
or excessive grease. Though a fire is
1. Use Care When Opening
Door—Let hot air or steam
escape before removing or
replacing food.
unlikely, if one occurs, proceed as follows:
2. Do Not Heat Unopened Food
Containers—Build-up of
Surface Element Fire
1. Smother the fire with a nonflammable lid or baking
soda, or use a Class ABC or BC extinguisher. Not
water. Not salt. Not flour.
pressure may cause container to burst and
result in injury.
3. Keep Oven Vent Ducts Unobstructed.
4. Placement of Oven Racks—Always place oven
racks in desired location while oven is cool. If rack
is removed while oven is hot, do not let potholder
contact hot heating element in oven.
5. Protective Liners—Do not use aluminum foil to line
drip bowls, oven racks or oven bottoms. Improper
installation of these liners may result in a risk of
electrical shock, or fire.
2. As soon as it is safe to do so, turn the surface
controls to OFF. Turn off power at main circuit
breaker or fuse box.
Oven Fires
1. If you see smoke from your oven, do not open
oven.
2. Turn off oven.
3. As an added precaution, turn off power at main
circuit breaker or fuse box.
4. Turn on vent to remove smoke.
5. Allow food or grease to burn itself out in oven.
6. If smoke and fire persist, call fire department.
7. If there is any damage to components, call an
authorized servicer before using range.
SELF-CLEANING OVENS
1. Do Not Clean Door Gasket—The door gasket is
essential for a good seal. Care should be taken not to
rub, damage, or move the gasket.
2. Do Not Use Oven Cleaners—No commercial oven
cleaner or oven liner protective coating of any kind
should be used in or around any part of the liner.
3. Clean Only Parts Listed in Manual
Precautions
4. Before Self-Cleaning the Oven—Remove broiler pan,
oven racks, and other utensils.
5. Remove All Items From Rangetop and Backguard.
• Do not cook food directly on
!
rangetop surface, always use
cookware.
• Do not mix household cleaning products. Chemical
mixtures may interact with objectionable or even
hazardous results.
VENTILATION HOODS
1. Clean Ventilating Hoods Frequently—Grease should
not be allowed to accumulate on hood or filter.
• Do not put plastic items on warm cooking areas. They
may melt and stick.
2. When flaming foods under the hood, turn the fan on.
• Oven door contains a glass window. While the
window is built to be sturdy and strong, it is still glass
and needs to be treated with care.
• Do not lift or move range by grasping oven door
handle. This can result in window glass breaking or
shattering.
• Do not slide rough metal objects across rangetop
surface. Scratching or metal marking can result.
• Do not leave fat heating unless you remain nearby.
Fat can ignite if overheated by spilling onto hot
surfaces.
• Do not allow pots to boil dry as this can cause
damage to cooking surface and pan.
• Do not use rangetop surface as a cutting board.
• Do not use range for storage or as a display counter.
SAVE THESE INSTRUCTIONS
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Cookware Recommendations
What Should You Consider in Cookware?
Flat Pan Test
For best cooking results, use a pan
with a flat bottom. To determine if
pan has a flat bottom.
SELECT
AVOID
Flat bottomed cookware.
Cookware with rounded or warped bottoms.
Light gauge metal cookware.
1. Rotate a ruler along bottom of
pan. If pan is not flat, gaps
between bottom of pan and
edge of ruler can be seen.
2. A small groove or mark on a
pan does not affect cooking
times. However, if a pan has a
gap, formed rings, or an uneven
bottom, it does not cook
Heavy gauge metal cookware.
Handles that are secure, that are not
heavy enough to tilt pan.
Cookware with loose or broken handles.
Proper pan size.
Cookware that is smaller than or greater than
heating element size by 1 inch.
Flat bottomed wok
Wok with a ringstand on bottom
efficiently and in some cases
may not boil liquid.
Can I can?
Amana manufactures a special
canning element that enable canning
without causing damage to the range.
It can be obtained through an Amana
dealer or by calling (800) 843-0304.
COOKWARE
MATERIAL
USES
Aluminum
Heats and cools quickly. Use for frying, braising,
and roasting.
Stainless Steel
Heats and cools at moderate rate. Use for soups,
sauces, vegetables, general cooking.
In many types of ranges, the heat
generated by the canning cookware
overheats the element and can cause
failure of the heating element and
possible damage to the range backguard.
This hazard can be prevented by using
the canning element.
Copper Clad /
Tin Lined
Heats and cools quickly. Use for gourmet cooking,
wine sauces, egg dishes.
Cast Iron
Heats and cools slowly. Use for low heat cooking,
frying.
Enamelware
Heating speed depends on base metal in the
cookware. Use for low heat cooking.
Ceramic (Glass)
Heats and cools slowly. Use for low heat cooking.
Not recommended for smoothtop cooking.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Range
Setting Surface Element Controls
Turn the surface element control knobs in
either direction to turn on the surface
WARNING
!
To avoid risk of serious personal
injury, property damage, or fire,
do not leave surface elements
unattended while in operation.
Grease and spillovers can ignite
causing a fire.
elements. The controls have infinite
settings between LO and HI for fine
temperature control.
OFF
LO
HI
1. Push in and turn surface element
control to desired setting.
2. When finished cooking, turn control
to OFF position.
MED
Indicator Lights
Each surface element is indicated by an
indicator light that glows when the
element is turned on. The indicator light
will shut off when the knob is returned
to the OFF position.
SURFACE ELEMENT
CONTROL SETTINGS
WHEN TO USE SETTING
Use to prepare food at less than boiling
temperatures or to simmer.
LO
Use to maintain boiling of larger amounts of food,
low temperature frying and to maintain correct
pressure in a pressure cooker.
Use to bring food to boiling temperatures. When
food is boiling temperature setting should be
reduced to LO through MED.
MED
HI
Aluminum Foil
Oven Racks and Rack Positions
Your range has 5 oven rack positions to accommodate all type of cooking
and cookware .
WARNING
!
Oven Rack Placement
Position oven rack before turning
oven on.
1. Pull rack forward to stop position.
2. Raise front edge of rack and pull
until rack is out of oven.
3. Place rack in new rack position.
• Curved edge of rack must be
toward rear of oven.
To avoid risk of personal injury,
property damage or fire, do not
line oven bottom, racks, or broiler
pan and grid with aluminum foil.
5
4
3
2
1
When placed on the oven bottom or
racks, aluminum foil not only creates
a hazard, but also affects cooking
performance. To minimize spills in
the oven, place a shallow pan or
cookie sheet underneath food items
that drip or spill.
RACK POSITION GUIDELINES
Rack Position
1 and 2
Food Type
For large cuts of meat such as roasts or turkeys. For
baked foods such as frozen pies or angel food cakes.
3
For most baked foods on a cookie sheet or shallow pan.
For broiled or toasted foods.
4 and 5
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays and Sounds
Displays
P
R
B
AM
PM
HR
time-of-day,
timer and timed
or delayed
settings.
8 8 8
CONV BROIL
DELAY TIMED BAKE
CLEAN LOCKED
PRE
8888
CLEAN
OVEN 1
2
STOP ON TIMER
Displays
P
R
B
AM
HR
temperature and
cooking method
or function for
oven.
8 8 8
CONV BROIL
DELAY TIMED BAKE
CLEAN LOCKED ON
PRE
Timer Signal
PM
8888
When time elapses, timer beeps 3
times then approximately once
every 6-8 seconds until TIMER ON/
OFF pad is pressed.
CLEAN
OVEN
STOP ON TIMER
Preheat Signal
After setting oven to bake and
selecting a temperature, oven
preheats. When oven reaches set
temperature, 1-second signal
sounds.
DISPLAYS
DESCRIPTION
TIME or HR
TIME appears in display while time-of-day is
entered. TIME HR appears when time is entered for
timed or delayed baking or delayed self-cleaning.
TIMER
BAKE
Timer displays while timer is set and while timer
counts down.
End-of-Cycle Signal
When a timed cooking cycle is
complete, three long signals sound.
End of cycle signal continues to
sound until OVEN CANCEL pad is
pushed.
BAKE displays while bake oven temperature is
entered. While oven is heating BAKE displays.
ON
Displays when oven is on.
TIMED BAKE
Displays when a timed baking cycle is set.
Displays when delayed bake is set.
DELAY OVEN
TIME BAKE
DELAY
Displays when delayed self clean is set.
CLEAN STOP
TIME CLEAN
LOCK
STOP TIME
Displays when setting the stop time for a delayed
baking or self-clean cycle.
BROIL
CLEAN
LOCK
Displays when a broil is set.
Displays when self-clean cycle is entered and set.
LOCK flashes while oven door is locking and
remains in display while door is locked. After cycle
is complete and oven has cooled to a safe
temperature, LOCK no longer displays and door can
be opened.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
12-hour automatic cancel
This safety feature prevents oven from continuing to operate if it has been
left on for over 12 hours. If a cooking function continues longer than 12 hours
without any options on oven control being touched, this feature turns oven
off. Any time an option is touched, 12-hour automatic cancel is reset.
¸
Child lockout
This safety feature is used to prevent children from accidentally
programming oven by disabling electronic oven control. Press and hold
BAKE and CLOCK for 5 seconds. “OFF” displays where the temperature
normally appears. To reactivate control, press and hold BAKE and CLOCK
pads for 5 seconds on the upper oven control. Child lockout must be reset
after a power failure.
B
Oven temperature control adjustment
Your new range is calibrated at the factory for temperature. Due to individual
variances and preferences, it may be necessary to adjust individual ovens
once they have been installed.
When first using oven, follow recipe times and temperatures. Before
adjusting oven baking temperature, test a recipe by using a temperature set
higher or lower than the recommended temperature. The baking results
should help you to decide how much adjustment is needed. Remember that
a convection oven will cook food more quickly than a standard (conventional)
oven.
An accurate digital thermometer is necessary to calibrate the oven. Store
purchased oven thermometers do not measure oven temperature accurately.
NOTE: Remove aluminum foil from oven—it will alter oven performance.
Check for blocked heat vents. If it still appears the oven is not performing as
expected, a calibration may be done.
1. Push BAKE pad.
2. Push up arrow pad until an oven temperature more than 500°F displays.
3. Immediately push and hold BAKE pad (approximately 5 seconds)
4. A double digit number will display ranging from -35 to 35.
5. Immediately, press either
+
•
•
to increase oven temperature by 5°F. Maximum change is 35°F.
to decrease oven temperature by 5°F. Maximum change is 35°F.
-
• When temperature is adjusted to a cooler setting, a minus sign (-) will
display with the offset temperature.
F-
code Warning
F1
F2
F3
Shorted pad button
4. When desired temperature change is displayed, push OVEN CANCEL
button. Temperature adjustment will be retained through a power failure.
Oven cavity over temperature
Open circuit in oven
temperature sensor circuit
Service codes and tones
Electronic oven control is equipped with a self-diagnostic system.
Self-diagnostic system alerts you if there is an error or problem with the unit.
If the electronic range control sounds a series of beeps and display shows
an F-code, record the F-code shown and turn control to OFF. Some F-codes
can be cleared by disconnecting power to the range. If the code continues to
reoccur disconnect electrical supply to range and contact an authorized
servicer.
F4
Shorted circuit in oven
temperature sensor circuit
F5
F7
Failed control.
Failure of door lock switch
sensing with door locked.
F9
Failure of door lock switch
sensing with door unlocked
DOOR Door Latch Failure
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Oven Control
OVEN
LIGHT
DELAY
OVEN ON
CLEAN
STOP
HR
888
BAKE BROIL
CLEAN LOCK
O
N
OVEN
CANCEL
TIMER
STOP
TIME
TIMER
ON/OFF
COOK
TIME
CLOCK
CLEAN
BROIL
BAKE
Setting Electronic Clock
The 12 hour clock does not display AM, PM or military time. When power is
connected or restored, display flashes until pad is
pressed or temperature knob is turned.
Flashing Display
When power is connected or
interrupted, oven display flashes.
Press CLOCK to clear display.
Clock may need to be reset.
1. Press CLOCK pad.
• TIME displays in lower left corner
+
2. Press or
pad until correct time-of-day
CLOCK
displays.
3. Press CLOCK pad to set time.
• If CLOCK pad is not pressed, approximately
60 seconds after last entry, TIME
disappears and clock is set.
Making the Numbers
Increase at a Faster
Rate
Time increases in larger increments
+
the longer or
pad is held.
Setting Minute Timer
Timer Signal
When time elapses, timer
beeps 3 times then
The timer is a timer only. Electronic timer does not control bake, broil, or
self-clean function. Timer can be set from 5 seconds to 9 hours and 50
minutes.
approximately once every 6-8
seconds until TIMER ON/OFF
pad is pressed.
1. Press TIMER pad.
• TIMER displays
+
2. Press
or
pad until desired amount of
time displays.
• Timer begins counting down
automatically after time is entered.
3. Press and hold TIMER pad to cancel timer
signal.
TIMER
End-of-Cycle Signal
When a timed cooking cycle is
complete, three long signals
sound. End of cycle signal
continues to sound until OVEN
CANCEL pad is pushed or for 5
minutes.
• After time elapses, timer beeps 3 times
then approximately once every 6 to 8
seconds until TIMER pad is pressed.
Resetting and Canceling Timer
To reset the time when remaining time is displayed, press TIMER pad,
+
then or pad until new time displays. To cancel timer when remaining
time is displayed or when signal is beeping, press TIMER pad and hold for
approximately 5 seconds. Pressing OVEN CANCEL pad to silence timer
will also cancel oven operation.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Oven Control
(cont'd)
Preheating
Baking
In most cases, you should preheat the
oven before baking. After the range
control is set, the oven temperature will
begin to rise until the desired cooking
temperature is reached. When cooking
temperature is reached oven signal
beeps for approximately 1 second. For
delicate baking, preheat approximately
15–20 minutes before placing food
inside oven or wait 10 minutes after
oven signal beeps before placing food in
oven. The extra time creates a more
stable oven temperature.
1. Press BAKE pad.
• BAKE and - - -° display.
2. Press or
pad until desired
OVEN
CANCEL
BAKE
temperature is displayed.
• BAKE, ON , and baking
temperature are displayed
3. Press OVEN CANCEL pad
when finished.
• Remove food from oven when cooking time has elapsed. Food left in
oven can overcook.
Broiling
How High or Low Can I
Broiling system generates immediate, intense heat using a special
reflector. This reflector focuses heat directly on the food; searing in
natural juices and providing restaurant quality, charbroiled flavor.
Set the Temperature?
Oven temperature can be set from 170°F
to 550°F in 5° increments. Temperature
starts at 100°F and increases in 5°
increments until reaching the set
temperature. Some minor smoking is
normal when using oven for first few
times.
Center food on broiling grid and pan and place on rack in oven. Oven
door can be shut or open to the first
stop. Broiling does not require
preheating.
OVEN
1. Press BROIL pad.
BROIL
CANCEL
•
BROIL and - - -° display.
+
2. Press
pad to set HI broil or
Broiling Hints
-
pad to set lower broil
temperature.
•
•
Temperature sets to HI, from 5 through 1.
Oven beings to broil within 5 seconds. BROIL,
setting display.
WARNING
!
O
N
and heat
Never leave oven unattended
while broiling. Overcooking may
result in a fire.
3. Press OVEN CANCEL pad when finished.
BROILER
SETTING
APPROXIMATE
TEMPERATURE
USE TO COOK
•
•
•
Remove excess fat from meat
before broiling. Cut edges of meat
to prevent curling.
Place food on a cold ungreased
broiling pan. If pan is hot, food
sticks.
All food except fish should be
turned at least one time. Begin
broiling with skin side down.
Season meat after it has browned.
Broiling does not require
HI
5
600°F
550°F
525°F
475°F
425°F
400°F
Red meats
Pork
4
Poultry
Seafood
3
2
Fruits and vegetables
1
Toasting and warming breads
•
•
RACK POSITION GUIDELINES
Rack Position Food Type
preheating.
•
Begin cooking using suggested rack
levels in Broiling section to test
broiler results. If food is not brown
enough, cook on a higher rack
position. If food is too brown, cook
on a lower rack position.
1 and 2
For large cuts of meat such as roasts or turkeys. For
baked foods such as frozen pies or angel food cakes.
3
For most baked foods on a cookie sheet or shallow pan
For broiled or toasted foods.
4 and 5
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Oven Control
(cont'd)
What's the difference
between TIMED and
DELAYED cooking?
Timed Baking
Set oven to cook for desired amount of time. Oven automatically stops
heating after time elapses.
When using TIMED cooking, the oven
begins to heat immediately after the
oven control is set. Then, the oven cooks
for the desire length of time set. When
using DELAYED cooking, the oven
begins to cook later in the day. Set the
time that you want to end cooking and
how long you want to cook. The oven
control calculates when to start cooking
from those times.
1. Place food in oven.
2. Press COOK TIME pad.
• OVEN, TIME, and HR
display.
COOK
TIME
BAKE
3. Press
or pad until desired
length of time is displayed.
4. Press BAKE pad.
BAKE and - - -° display.
5. Press or pad until desired temperature is displayed.
• Cooking begins automatically.
• BAKE, ON , TIME, and HR display
• When cooking time has elapsed an end of cycle signal sounds.
Oven automatically turns off and display returns to time of day.
Oven signal sounds 3 times, then once every 3 seconds for 5
minutes or until OVEN CANCEL pad is pressed.
How Far Ahead Can I Set
the Time?
Cook time can be set up to 11 hours and
50 minutes. To view cook time, press
and hold COOK TIME pad.
6. Press OVEN CANCEL pad when finished.
STOP TIME can be set 12 hours ahead.
When cooking time has elapsed, an end
of cycle signal sounds, oven
automatically turns off and display
returns to time of day. Oven signal
sounds 3 times, then once every 3
seconds for 5 minutes or until OVEN
CANCEL pad is pressed. Broil can not
be set to Timed or Delayed.
Delayed Baking
Set oven to begin and end baking at later time. Oven
control automatically calculates starting time.
1. Place food in oven.
2. Press BAKE pad.
BAKE
• BAKE and - - -° appear in display
3. Press or
pad until desired temperature
displays.
4. Press STOP TIME pad.
• Current time of day appears in display.
5. Press
displays.
or pad until desired stop time
CAUTION
!
STOP
TIME
To reduce risk of food poisoning
due to bacterial growth and
• Stop time can be set up to 11 hours and 55
minutes ahead of current time of day.
6. Press COOK TIME pad.
production of toxins, never hold
meat, milk, fish, or eggs for more
than 2 hours before cooking.
• OVEN, TIME, and HR display.
• To view the cook time later, press and hold
COOK TIME pad.
COOK
TIME
7. Press
displays.
or pad until desired cooking time
• Electronic oven control calculates start time.
• 10 minute minimum cooking time.
• When start time is reached DELAY no longer displays and
O
N
displays. Cooking begins automatically.
• When cooking time has elapsed an end of cycle signal sounds.
Oven automatically turns off and display returns to time of day.
Oven signal sounds 3 times, then once every 3 seconds for 5
minutes or until OVEN CANCEL pad is pressed.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Oven Control
(cont'd)
CAUTION
WARNING
CAUTION
!
!
!
To avoid risk of fire or smoke
damage, clean excess spills
before starting Self Clean.
To avoid fire or smoke damage,
remove any flammable materials
from storage drawer. Items like
plastic containers and paper
manuals can melt or burn.
To avoid risk of personal injury,
do not touch oven vents or area
around vents during self-
cleaning. These areas can
become hot enough to cause
burns.
How Long Should the Self-
Clean Cycle Last?
Self-cleaning
The Self-Clean cycle can be set from 2
to 4 hours. Minimum recommended
cleaning time is 3 hours. After the Self-
Clean cycle ends, the oven must cool
before the oven door can be opened.
When the LOCKED light no longer
glows in the display, you can safely
open the oven door. DO NOT force the
oven door open while the LOCKED
light shows in the display. The oven
door lock can be damaged.
Self-clean feature uses high oven temperature to clean oven interior.
1. Prepare oven for self-cleaning (see below
right).
2. Press CLEAN pad.
• CLEAN, TIME and — — — — display.
CLEAN
3. Press
or pad to adjust cleaning time.
• 3:00 displays when arrows are first pressed.
• Oven begins to clean. CLEAN, TIME, and
O
N
display during cycle. LOCK flashes in
display when automatic door latch is locking.
• LOCK is displayed during Self Clean cycle while door is locked.
• When oven has cooled to a safe temperature, the LOCK light
flashes while the door latch opens. When oven has cooled
enough to open, the LOCK light no longer displays and door
can be opened. No signal sounds at end of self clean cycle.
Do I need to prepare?
To get the best results from the self-
clean cycle, follow these steps:
•
Remove birds or animals
susceptible to smoke or other
fumes from the room or
adjoining room.
Delayed Self-clean Cycle
•
Make sure oven light cover is
properly in place. Do not use
cleaning cycle if it is not.
Remove oven racks and all cooking
utensils from oven.
Clean excess spills from oven
interior.
Remove items from range top and
backguard. These areas can become
hot during self-cleaning cycle.
Set oven to begin and end cleaning at later time Oven control
calculates starting time.
1. Prepare oven for self-cleaning (see right).
2. Press CLEAN pad.
•
•
•
• CLEAN, TIME and — — — — display.
CLEAN
3. Press
or
pad until desired amount of
cleaning time is displayed.
4. Press STOP TIME pad.
5. Press
or pad until desired stopping time
appears in display.
• Starting time is automatically calculated based
on amount of cleaning time and stop time.
O
CLEAN, TIME, and
display during cycle.
Interrupt Self-
Clean Cycle
1. Press OVEN CANCEL pad.
2. When oven has cooled to a
safe temperature, door will
unlock and can be opened. DO
NOT force door. This can
STOP
TIME
N
• LOCK flashes in display when automatic door
latch is locking.
• The oven begins the Self-Clean cycle.
• LOCK is displayed during Self Clean cycle.
• When oven has cooled to a safe temperature, the LOCK light
flashes while the door latch opens. When oven has cooled
enough to open, the LOCK light no longer displays and door can
be opened. No signal sounds at end of self clean cycle.
cause damage to the latch.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooking
Baking Guidelines
When baking with a new oven, keep in mind temperatures vary from oven to oven. Store-bought thermometers are
generally not accurate and should not be used to calibrate oven temperatures.
BAKING TIME GUIDELINES
Hints for Cookies,
Cake Pan
Type
Pan size
Cups of
batter
Oven
Temp.
•
Shiny, flat cookie sheets should
be used. Avoid cookie pans with
high sides - this will cause
Minutes
25 to 30
25 to 30
25 to 30
Oval
7 ¾” x 5 ¾”
13” x 9 ¾”
6”
2 ½
8
350°F
350°F
350°F
uneven browning on the top.
Cookie sheet should not touch
the sides of the oven or door.
•
Round,
2” layer
2
Cakes,
8 “
14”
8”
3
10
5
350°F
350°F
325°F
30 to 35
50 to 55
60 to 65
•
Follow recipe’s directions for
pan size. Shiny pans work best
for cakes.
Round,
3” layer
•
Cake baked in too large a pan
will be thin and dry. Too small a
pan will be undercooked or
unevenly cooked and may spill.
12”
18”
11
9
325°F
325°F
75 to 80
60 to 65
Half Round,
2” layer
Pies
Half Round,
3” layer
18”
12
325°F
60 to 65
•
Pies should be baked in dark or
dull pans to increase browning.
Frozen pies should be heated
on an aluminum cookie sheet.
Square
6”
2
6
350°F
350°F
350°F
25 to 30
35 to 40
45 to 50
•
10”
16”
15 1/2
BAKEWARE GUIDELINES
Bake Pan Placement
• Keep pans and baking sheets 2 inches from oven
walls.
Dark or dull pans
Absorb more heat
and result in darker
browning.
Recommended for
pies and breads.
• Stagger pans placed on different racks so one is
not directly over the other.
Recommended for
cookies.
Shiny pans (no
sides)
Recommended for
cakes
Shiny pans
(sides)
Lower
Glass pans
recommended
oven temperature
by 25°F.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooking
(cont'd)
Common Baking Problems
If you begin to notice consistent problems refer to the chart below for possible solutions. If results are still poor,
contact Amana Consumer Affairs at (800) 843-0304.
Problem
Cause
Test your cakes for doneness
While they are still in the oven. Because
of variances across individual ovens, it
is best to test for the proper consistency
rather than solely relying on time and
visual appearance as an indicator.
Lopsided cakes
(bake unevenly)
Pans touching each other or oven walls.
Batter spread unevenly in pan.
Uneven heat distribution in oven.
Oven is not level.
Cakes, cookies, biscuits
Oven not preheated.
too brown on bottom or top Pans touching each other or oven walls.
Using glass, darkened, warped or dull
finish metal pans.
Rack position too high or low.
Incorrect use of aluminum foil.
Oven temperature too high.
It may not be the oven
Pies don’t brown
Incorrect rack position.
Using shiny metal pans.
Temperature set too low.
Cake problems may be in the mixing of
the batter. Overbeating can cause cake
structure to break down and excessive
shrinkage of the cake. Underbeating
can result in lumpy cakes that may not
be cooked thoroughly. All ingredients
should be at room temperature—not
out of the refrigerator. Make sure to
follow the recipes directions for how
long the batter should be mixed.
Cakes not done in center
Temperature too high.
Pan too small.
Baking time too short.
Pan not centered in oven.
Cakes fall
Too much shortening or sugar.
Too much or too little liquid.
Temperature too low.
Old or too little baking powder.
Pan too small.
Oven door opened frequently (peeking).
Insufficient baking.
Cake stuck?
Excessive shrinkage
Too little leavening.
Mixing batter too long.
Pan too large.
Oven temperature too high.
Baking time too long.
Allow cake to cool in cake pan on a rack
for 10 minutes before removing. Larger
cakes (over 14 inches in diameter) may
take 15 minutes. If the cake has cooled
too long, reheat in the oven at 250°F for
a few minutes.
Cakes high in middle
or cracked
Temperature set too high.
Overmixing.
Too much flour.
Pans touching each other or oven walls.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooking
(cont'd)
Meat Basics
While cooking has always been a talent, it is now becoming a science, also. Amana provides this information as a
guide to aid in preparation. For specific questions regarding meat preparation, handling, or storage contact
USDA (United States Department of Agriculture) Meat & Poultry Hotline at (800) 535-4555.
Handling Hints
Cooking Tips
Storage Safety
•
When shopping, put meat in its
own separate plastic sack to
keep drips off other foods.
Defrost frozen meats in
•
Marinate meat in the
refrigerator. Throw out excess
marinade that came into contact
with meat.
•
•
•
•
Once carved, refrigerate unused
portion immediately.
Keep hot foods hot and cold
foods cold when serving meals.
Separate cooked foods into
small portions for fast cooling.
Do not store cooked ground
meats or meals containing
ground meats for longer than
3 to 4 days in the refrigerator.
Do not allow cooked or
•
refrigerator, not at room
temperature.
•
•
Use an oven-proof meat
thermometer.
Cook meat to internal
temperature recommended by
USDA.
•
•
Keep meat cool and covered
until it is time to cook.
Wash hands with warm soapy
water before and after handling
meat or raw egg.
•
•
When reheating foods, heat to
an internal temperature of at
least 165 °F.
While cooking meats, turn over
at least once.
•
•
•
Thoroughly wash any surface or
utensil raw meat or egg touched.
Do not put cooked meat on the
same plate that held raw meat.
uncooked meat juices to come
into contact with ready-to-eat
foods such as fruits or
vegetables.
Tenderizing
Using a Meat Thermometer
Braising is only one way to tenderize
less tender cuts. Before cooking, you
may pound, cube, marinate, or use
commercially prepared meat
When using a meat thermometer, remember to insert it at a slight angle, in
the thickest part of the meat, away from fat and bone. The meat should be
removed when 5°F below the desired final temperature. While the meat sits
before carving, it will continue to cook internally, raising the last 5°F by itself.
tenderizers. You may then use a dry
method to cook the meat.
A meat thermometer can
•
•
Take the guesswork out of cooking to a desired ‘doneness’.
Help reduce the risk of foodborne illness.
•
Marinades are acidic liquids such
as wine, citrus, or vinegar.
Marinades soften meat fibers but
only penetrate about one-fourth of
an inch into the interior of the
meat. Do not marinate meat for
longer than 24 hours.
Oven-safe Thermometer
•
Inserted before the meat is placed in the oven, this thermometer stays
with the meat while it cooks.
•
The internal temperature will rise slowly as the meat cooks.
•
•
•
Pounding with a heavy meat mallet
breaks down the connective tissue
to tenderize meat.
Cubing breaks down the structure
more than pounding. Cubing is
done at the meat counter.
Commercial tenderizers are
primarily enzymes that work on the
outer fourth inch on a meat cut.
Make sure to follow the
Instant-read Thermometer
•
•
•
Not oven safe, these thermometers are placed in the meat when it is
removed from the oven.
While times may vary, an accurate temperature is normally displayed
within one to two minutes.
When using an instant-read, remember to clean the thermometer stem
with warm, soapy water between readings.
manufacturer’s directions.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooking
(cont'd)
Broiling Guidelines
Broiling is a dry heat cooking method that allows a restaurant quality
charbroiled flavor. Meat is exposed directly to the heating element at high
temperatures.
1. Place meat on rack in broiler pan, with the surface of cuts the specified
distance from the heating element (specified below).
2. Broil for half the recommended time, or until the surface is browned.
3. Turn meat and continue broiling to desired internal temperature.
4. Season, if desired.
Distance
From Heat
(inches)
Approximate
Cooking Time
(minutes)
Recommended Internal
Temperature
Thickness
(inches)
Weight
(pounds)
Meat Cut
BEEF
¼ to 1
1 to 1 ¼
2 to 3
3 to 4
12 to 14
8 to 12
¼
1
Chuck Shoulder Steak
½
½ to ¾
¾ to 1
¾
2 to 3
3 to 4
4 to 5
8 to 12
10 to 15
20 to 25
Rib Eye Steak
Sirloin Steak
1
Very Rare
Rare
130°F
140°F
145°F
160°F
170°F
180°F
1 ½
1 to 1 ¾
1 ½ to 3
2 ¼ to 4
¾
1
1 ½
2 to 3
3 to 4
4 to 5
10 to 15
16 to 21
21 to 25
Medium Rare
Medium
Well Done
Very Well Done
¾
1
1 ½
¾ to 1
1 ½ to 2
2 to 3
2 to 3
3 to 4
4 to 5
8 to 12
10 to 15
20 to 25
Porterhouse Steak
Filet Mignon (Tenderloin)
2 to 4
2 to 3
3 to 4
10 to 15
12 to 14
10 to 15
¼ to ½
Flank Steak
1 to 1 ½
1
Ground Beef Patties
160°F minimum
¾ to 1
PORK
Chops, bone in
Chops, boneless
Tenderloin
4
4
4
4
4
6 to 8
6 to 8
¾
¾
All pork must be cooked to an
internal temperature of at least
160°F to reduce the likelihood of
Trichinosis.
15 to 25
10 to 20
8 to 10
½ to 1
Kabobs
Failing to cook the meat to this
temperature could result in
personal injury or illness.
1 inch cubes
Lean Ground Pork Patties
½
LAMB
Loin Chops
1
1
1
1
1
3 to 4
3 to 4
3 to 4
3 to 4
3 to 4
10 to 15
10 to 15
12 to 15
12 to 15
15 to 20
Rib Chops
Sirloin Steaks
Top Round Steaks
Center Leg Steaks
Medium
Well Done
160°F
170°F
Cubes for Kabobs
Lamb Patties
3 to 4
3 to 4
10 to 15
12
1 ¼ pieces
½ x 4 inches
¼ each
All times and recommended temperatures are provided by the USDA, the Beef Industry Council, the National Pork Producer’s
Council, and the American Sheep Industry Council.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooking
(cont'd)
Roasting Guidelines
Tender cuts such as rib and loin cuts are best cooked by dry heat methods,
such as roasting. To roast:
1. Heat oven to desired temperature.
2. Place roast directly from refrigerator fat side up in a shallow roasting
pan.
3. Insert ovenproof meat thermometer so tip is centered in thickest part of
roast. Make sure thermometer does not rest in fat or on bone.
4. Remove roast 5°F below desired degree of finished internal
temperature.
5. Transfer roast to carving board and tent loosely with aluminum foil for
approximately 15 minutes.
Approximate
Cooking Time
(minutes)
Oven
Temperature
Weight
(pounds)
Meat Cut
Recommended Internal Temperature
BEEF
Boneless Rump Roast
325°F
325°F
325°F
4 to 6
25 to 30
30 to 40
20 to 30
Very Rare
Rare
130°F
140°F
145°F
160°F
170°F
180°F
Tip Roast
3 ½ to 4
4 to 6
Eye Round Roast
Medium Rare
Medium
2 to 3
4 to 6
35 to 45
45 to 60
Tenderloin Roast
425°F
Well Done
Very Well Done
4 to 6
6 to 8
26 to 42
23 to 35
Rib Roast
325°F
350°F
Rib Eye Roast
4 to 6
18 to 24
PORK
Loin Roast, bone-in
Rib Roast, boneless
350°F
350°F
450°F
325°F
3 to 5
2 to 4
All pork must be cooked to an internal
temperature of at least 160°F to reduce
the likelihood of Trichinosis and other
food-borne illnesses.
20 minutes
per pound
Tenderloin
½ to 1
7 to 8
Ham bone-in, cook-before-eating
LAMB
Shoulder
325°F
375°F
375°F
325°F
35 to 40
30 to 35
25 to 30
45 to 55
3 ½ to 6
Rib Roast
1 ½ – 2 ½
2 to 3
Medium-Rare
Medium
Well Done
150°F
160°F
170°F
Rib Crown Roast, not stuffed
Loin Roast
1 ¼ to 1 ¾
5 to 7
7 to 9
15 to 20
20 to 25
Leg, Frenched Style or Half Shank
325°F
POULTRY (unstuffed)
Capon
325 to 350°F
325 to 350°F
4 to 8
20 to 30 min/lb.
50 to 60 total
Cornish Hens, whole
1 ¼ to 1 ½
Duck, whole
Goose, whole
Pheasant, whole
Quail, whole
Turkey
325 to 350°F
325 to 350°F
325 to 350°F
325 to 350°F
325°F
18-20 min/lb.
20 to 25 min/lb.
30 min/lb.
To reduce the risk of food-borne illnesses,
poultry must be cooked to an internal
temperature of 180°F.
2
—
20 minutes total
3 ½ to 5 ½ hours
8 to 16
All times and recommended temperatures are provided by the USDA, the Beef Industry Council, the National Pork Producer’s
Council, and the American Sheep Industry Council.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooking
(cont'd)
Braising Guidelines
Less tender cuts such as those from the round, chuck, brisket and shank
require moist cooking. A longer cooking time at lower temperatures with
moisture helps soften the meat.
1. Brown meat with a small amount of oil in heavy pan.
2. Pour off excessive drippings, season, if desired.
3. Add small amount of liquid (1/2 to 2 cups) and cover tightly.
•
Simmer gently over low heat on top of the range or in a 325°F oven,
until meat is fork tender.
Approximate
Cooking Time
(hours)
Oven
Temperature
Weight (pounds)
OR Thickness
Meat Cut
Recommended Internal Temperature
BEEF
Blade Pot Roast
325°F
325°F
325°F
3 to 5
3 to 5
3 to 5
1 ½ to 2
2 to 3
Arm Pot Roast
Chuck Roast (boneless)
2 to 3
Meat should be cooked to a
temperature of at least 160°F
to reduce the likelihood of food-
borne illnesses.
2 inches
x 2 inches
x 4 inches thick
Short Ribs
325°F
1 ½ to 2 ½
Round Steak
Flank Steak
325°F
325°F
¾ to 1 inch thick
1 to 1 ½
1 ½ to 2 inches
thick
1 ½ to 2 ½
LAMB
Shoulder Chops, Round Bone or
Blade
325°F
1 inch thick
1 to 1 ¼
Meat should be cooked to a
temperature of at least 160°F
to reduce the likelihood of food-
borne illnesses.
Riblets
Shanks
325°F
325°F
3 pounds
3 pounds
1 ½ to 2
1 to 1 ½
1 inch pieces
1 ¼ lbs.
Stew Cubes
325°F
1 ¼ to 1 ½
All times and recommended temperatures are provided by the USDA, the Beef Industry Council, the National Pork Producer’s
Council, and the American Sheep Industry Council.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Removing Oven Door
1. Make sure oven is cool.
2. Open door fully.
3. Remove screw on each side of
lower portion of oven door.
4. Close door to first stop (broiler
position), grasp door firmly on
each side, and lift upward until
door is off hinges.
CAUTION
!
To avoid personal injury or
property damage, handle oven
door with care.
• Do not lift door by handle.
• Door is heavy and can be
damaged if dropped.
• Avoid placing hands in hinge
area when door is removed.
Hinge can snap closed and
pinch hands.
• Do not scratch or ship glass or
twist door. Glass may break
suddenly.
•
Do not lift door by handle.
Glass can break.
•
If necessary, push hinges
closed once oven door is
removed. Use both hands
when closing hinges. Hinges
snap closed.
• Replace door glass if damaged.
Cleaning Oven Door
Not all areas of the oven are cleaned
by the self-clean cycle. The oven
door gasket and the area
surrounding the gasket will not be
cleaned effectively by the self-clean
cycle.
DO NOT clean the gasket. Do not
wet, rub, soak or use any type of
cleaning material to clean the oven
gasket. Any damage or defects
occurring from attempting to clean or
remove the gasket are not covered
by warranty.
To clean the area around the gasket
make sure oven is cool to the touch.
Using a cloth with a mild soap wipe
area needing to be cleaned. Avoid
gasket. Gasket should not be
Door Gasket
removed while cleaning. Do not allow
water or cleaning solution to spill or
drip onto gasket.
Removing Storage
Drawer
1. Slide drawer out until it stops.
2. Remove stored items.
3. Grasp drawer sides near back of
drawer.
4. Lift up and out. Reverse to
reinstall.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning (cont'd)
Replacing Oven Light
WARNING
!
1. Disconnect electrical supply.
2. Remove oven door if desired.
To avoid risk of burns or electrical
shock:
3. While wearing protective gloves, unscrew counter clockwise the
light bulb cover located in rear of oven cavity.
Then turn light bulb counterclockwise to remove.
4. Replace light bulb with 120-volt, 40-watt appliance bulb.
Do not over tighten bulb or cover or they may be difficult to
remove later.
• disconnect electrical supply to
oven before changing light
bulb.
• before replacing light bulb
make sure oven and bulb are
cool.
5. Replace light bulb cover and oven door before use.
6. Reconnect power supply.
• Do not operate oven without
bulb and cover in place.
CAUTION
!
Wear gloves to protect hands
from accidental bulb breakage.
To keep your range looking like new, Amana recommends routine cleaning. The following general instructions for routine and
tough spot cleaning are based on the performance of Amana recommended products. To order these products, contact the
Consumer Affairs department at 800-843-0304.
PART
GENERAL DIRECTIONS
Bake and broil element
Do not clean bake element or broil element. Any soil will burn off when element is heated. Bake element is
hinged and can be lifted to clean oven bottom.
Broiler pan and grid
Control knobs
Drain fat, cool pan and grid slightly. (Do not stand soiled pan and grid in oven to cool.) Sprinkle with soap. Fill
the pan with warm water. Let pan and grid stand for a few minutes
Pull off knobs. Wash gently with mild soap and water but do not soak. Dry and return knobs to oven, making
sure to match flat area on the knob to the flat area on the shaft.
Outside finish
Wash all glass with cloth dampened in soapy water. Rinse and polish with a dry cloth. If knobs are removed, do
not allow water to run down inside surface while cleaning.
Oven racks
For heavy soil, place oven racks in large plastic bag with ammonia and water in cup. Seal tightly and allow to
stand overnight. Wash and rinse, dry thoroughly.
Storage drawer
For heavy soil, clean by hand and rinse thoroughly. Remove drawer for ease in cleaning. Be sure drawer is dry
before replacing.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
You may save time and money by checking items below before calling for service. List includes common concerns
that are not the result of defective workmanship or materials. If your question is not explained below, contact Amana
Consumer Affairs Department at 800-843-0304.
Topic
Possible Cause
Solution
OPERATION
Appliance not working
Power outage
Make sure appliance is plugged in.
Verify that circuit breaker is not tripped.
Replace household fuse but do not change fuse capacity.
Oven not working
Programming error
Coils not plugged in
Shut off power to oven for five minutes by switching off
circuit breaker. Reset circuit breaker and try oven again.
Surface units not working- no power
(coils)
Turn control off. Make sure that the coils are properly
connected to power source by removing and then firmly
pushing coil into place.
Clock and timer not working
Oven light not working
Power outage
Make sure appliance is plugged in. Verify that circuit breaker
is not tripped. Replace fuse but do not change fuse
capacity.
Loose bulb
Burnt out bulb
Check for loose bulb. Tighten.
Check for burnt out bulb. Replace if necessary with an
appliance bulb.
Self clean not working
Door handle not locked
Oven is self-cleaning
Oven still hot
Lock oven door handle.
Allow cycle to complete.
Oven door will not unlock
Will not unlatch until a certain cooler temperature has been
reached. Do not force door open – will void warranty. May
blow cooler air on latch with hair dryer at cool setting to
quicken process.
Oven not clean after a self clean cycle
Locked light displayed
Too much soil, grime left in
oven
Wipe out and remove excess soil prior to running self-clean
cycle.
Soot remains in oven after
cycle
Normal.
Door locked
If oven is hot, allow to cool rather than trying to force door
latch open.
Display flashing
Power failure
Service code
Reset clock, press CLOCK.
F-(numeric) display
Shut off power to oven for one to two minutes by switching
off circuit breaker. Reset breaker. If continues, contact
service department.
Oven smokes the first few times used
Normal
Minor smoking is normal the first few times the oven is used.
COOKING
Food not baking properly
Various causes
See Cooking, Common Baking Problems
See Cooking, Roasting
Food not roasting properly
Food not broiling properly
Oven temperature too hot or cold
Various causes
Various causes
See Cooking, Broiling
Calibrate oven temperature
See Using the Oven Control, Oven Temperature Control
Adjustment
Oven has strong odor
Normal
Ovens will have a ‘new’ odor. Run a self-clean cycle to
remove the odor.
Not boiling or cooking fast enough
Make sure pans fit heating elements. See Cookware
Requirements.
Improperly sized cooking
utensils
NOISE
Frequent cycling off and on of oven.
Normal
Normal
To maintain a temperature for baking, the oven cycles on
and off.
Cracking or popping sound
Wet cooking utensils or possible spillage.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Amana Warranty
Full ONE Year Warranty
Amana Appliances will repair or replace, including related labor and travel, any part (f.o.b. Amana Iowa) which
proves defective as to workmanship or materials.
Limited Warranty
After one year from the date of original retail purchase, Amana will provide a free part, as listed below, to
replace any part that fails due to a defect in materials or workmanship. The owner will be responsible for paying
all other costs including labor, mileage, and transportation.
Second Year
Amana will provide replacement part, part only (f.o.b. Amana Iowa), which proves defective as to workmanship
or materials.
Third through Fifth Year
Amana will provide replacement glass/ceramic cooktop, electric surface elements or gas surface burners, part
only (f.o.b. Amana Iowa) which proves defective as to workmanship or materials.
To Receive Warranty Service
What is not covered by these
warranties
Service must be performed by an authorized Amana
service representative. To schedule service, contact
the Amana dealer where you purchased your appliance
or contact Amana Appliances Factory Service.
•
Replacement of household fuses, resetting of
circuit breakers, or correction to household wiring
or plumbing.
•
•
•
•
•
Normal product maintenance and cleaning,
including light bulbs.
Products with original serial numbers removed,
altered, or not readily determined.
Products purchased for commercial, industrial,
rental, or leased use.
Products located outside of the United States
or Canada.
Premium service charges, if the servicer is
requested to perform service in addition to normal
service or outside normal service hours or area.
Adjustments after the first year.
Repairs resulting from the following:
• Improper installation, exhaust system, or
maintenance.
• Any modification, alteration, or adjustment not
authorized by Amana.
• Accident, misuse, abuse, fire, flood, or
acts of nature.
• Connections to improper electrical current,
voltage supply, or gas supply.
Amana Appliances Factory Service
1-800-628-5782 inside USA
For more information,
Amana Appliances Consumer Services
Amana Appliances
2800 220th Trail
Amana, Iowa 52204
1-800-843-0304 inside USA
(319) 622-5511 worldwide
•
•
When contacting Amana Appliances please
include the following information:
•
•
Your name, address, and telephone number.
Model number and serial number of your appliance
(found on upper left hand corner of storage drawer
opening).
The name and address of your dealer and the date
of purchase.
•
•
•
A clear description of the problem.
Proof of purchase (sales receipt).
• Use of improper pans, containers, or accessories
that cause damage to the product.
IN NO EVENT SHALL AMANA BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
This warranty gives you specific legal rights, and you may have others which vary from state to state. For example, some
states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion may not apply to you.
Amana Appliances Online • http://www.amana.com
Part No.36-31986101-0
Printed in U.S.A.02/00
2000 Amana Appliances
Amana, Iowa 52204
Download from Www.Somanuals.com. All Manuals Search And Download.
|