Alpine Cassette Player TDM 7582E User Manual

R
EN  
CH  
TDTD  
M
M
-
-
7
75  
5
8
8
0
2
E
E
FM/AM Cassette Receiver  
• OWNER'S MANUAL  
Please read before using this equipment.  
用戶說明書  
使用本設備之前,一定請先閱讀。  
ALPINE ELECTRONICS, INC.  
Tokyo office: 1-1-8 Nishi Gotanda,  
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.  
6-8 Fiveways Boulevarde Keysborough,  
Victoria 3173, Australia  
ALPINE ELECTRONICS FRANCE S.A.R.L.  
(RCS PONTOISE B 338 101 280)  
98, Rue De La Belle Etoile, Z.I. Paris Nord Il  
B.P. 50016 F-95945, Roissy, Charles De Gaulle  
Cedex, France  
Shinagawa-ku,  
Tokyo 141-8501, Japan  
Tel.: (03) 3494-1101  
Tel.: (03) 9769-0000  
ALPINE ELECTRONICS GmbH  
Kreuzerkamp 7-11 40878 Ratingen, Germany  
Tel.: 02102-45 50  
Tel.: 01-48 63 89 89  
ALPINE ELECTRONICS OF AMERICA, INC.  
19145 Gramercy Place, Torrance,  
California 90501, U.S.A.  
ALPINE ELECTRONICS OF U.K., LTD.  
13 Tanners Drive, Blakelands, Milton Keynes  
MK14 5BU, U.K.  
ALPINE ITALIA S.p.A.  
Via C. Colombo 8, 20090 Trezzano Sul Naviglio  
MI, Italy  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Tel.: 01908-61 15 56  
ALPINE ELECTRONICS OF CANADA, INC.  
Suite 203, 7300 Warden Ave. Markham,  
Ontario L3R 9Z6, Canada  
Tel.: 02-48 47 81  
ALPINE ELECTRONICS DE ESPAÑA, S.A.  
Portal De Gamarra 36, Pabellón 32  
01013 Vitoria (Alava)-Apdo. 133, Spain  
Tel.: 34-45-283588  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Designed by ALPINE Japan  
Printed in China (Y)  
68P01434K84-O  
Melyi Printing Factory, Dalian, China  
No. 28 Chang Qing Street, Xl Gang District, Dalian, China  
ALPINE TDM-7582CH 68P01434K84-O  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
Contents  
Operating Instructions  
CD Changer Operation  
Controlling CD Changer (Optional) ................10  
Switching between Track No. and Elapsed  
WARNING  
Time Displays...............................................10  
Music Sensor (M.S.) Skip ................................10  
Fast Forward and Backward ............................10  
Repeat Play on Single Track or Entire Disc ....10  
M.I.X. (Random) Play .....................................11  
WARNING.................................................. 2  
CAUTION ................................................... 2  
PRECAUTIONS ......................................... 2  
Basic Operation  
Information  
Detaching the Front Panel..................................4  
Attaching the Front Panel ..................................4  
Initial System Start-Up ......................................4  
Automatic Setup (A.S.U.) ..................................4  
Turning Power On and Off ................................5  
Turning Loudness On/Off ..................................5  
Adjusting Volume/Bass/Treble/Balance  
In Case of Difficulty ........................................12  
Specifications ...................................................13  
Installation and Connections  
Warning ............................................................14  
Caution .............................................................14  
Precautions .......................................................14  
Installation .......................................................15  
Connections .....................................................16  
(Between Left and Right)/Fader  
(Between Front and Rear) ..............................5  
Displaying Time.................................................5  
Setting Time .......................................................5  
Radio Operation  
Manual Tuning ...................................................6  
Automatic Seek Tuning .....................................6  
Manual Storing of Station Presets .....................6  
Automatic Memory of Station Presets ...............7  
Storing into Direct Access Preset (D.A.P.)  
Band................................................................7  
Tuning to Preset Stations ...................................7  
Cassette Player Operation  
Inserting/Ejecting Cassette ................................8  
Normal Play .......................................................8  
Repeat Play ........................................................8  
Fast Forward and Rewind ..................................9  
Blank Skip (B.SKIP)..........................................9  
Manual Reverse .................................................9  
Programme Sensor (P.S.) ...................................9  
1-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
WARNING  
CAUTION  
The exclamation point within an equilateral  
triangle and "WARNING" are intended to alert the  
user to the presence of important operating  
instructions.  
The exclamation point within an equilateral  
triangle and "CAUTION" are intended to alert the  
user to the presence of important operating  
instructions.  
Failure to heed the instructions will result in  
severe injury or death.  
Failure to heed the instructions can result in injury  
or material damage.  
DO NOT DISASSEMBLE OR ALTER.  
Doing so may result in an accident, fire or electric shock.  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.  
Failure to do so may cause personal injury or damage to  
the product. Return it to your authorized Alpine dealer or  
the nearest Alpine Service Centre for repairing.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT  
OF THE REACH OF CHILDREN.  
Swallowing them may result in serious injury. If  
swallowed, consult a physician immediately.  
PRECAUTIONS  
Temperature  
USE THE CORRECT AMPERE RATING WHEN  
REPLACING FUSES.  
Be sure the temperature inside the vehicle is between  
+60°C (+140°F) and –10°C (+14°F) before turning your  
unit on.  
Failure to do so may result in fire or electric shock.  
DO NOT OPERATE ANY FUNCTION THAT TAKES  
YOUR ATTENTION AWAY FROM SAFELY DRIVING  
YOUR VEHICLE.  
Any function that requires your prolonged attention  
should only be performed after coming to a complete stop.  
Always stop the vehicle in a safe location before  
performing these functions. Failure to do so may result in  
an accident.  
Tape Slack  
Check and make sure any slack in the tape is taken up  
before inserting the tape into the unit. A loose tape can get  
caught in the mechanism and cause damage to the unit  
and the tape itself. Tighten the tape by inserting a pencil  
or a similar instrument into the spindle hole and turn until  
all the slack has been taken up.  
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN  
STILL HEAR OUTSIDE NOISE WHILE DRIVING.  
Failure to do so may result in an accident.  
USE THIS PRODUCT FOR MOBILE 12V  
Excessively Thin Tape  
APPLICATIONS.  
C-120 type cassette tapes are not recommended for use in  
Use for other than its designed application may result in  
automobile tape players.  
fire, electric shock or other injury.  
Precision Tape Mechanism  
DO NOT PLACE HANDS, FINGERS OR FOREIGN  
Prevent any foreign objects from entering the cassette  
opening as the precision mechanism and tape head may be  
damaged.  
Never play dirty or dusty tapes – they can damage the tape  
head.  
OBJECTS IN INSERTION SLOTS OR GAPS.  
Doing so may result in personal injury or damage to the  
product.  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Doing so may cause heat to build up inside and may result  
in fire.  
2-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tape Head Cleaning  
Periodic cleaning (approximately every 20 hours of use)  
of the tape head with a wet type head-cleaning cassette  
tape (available at audio stores) is necessary for best  
performance.  
Fuse Replacement  
When replacing the fuse(s), the replacement must be of  
the same amperage as shown on the fuse holder. If the  
fuse blows more than once, carefully check all electrical  
connections for shorted circuitry. Also have your vehicle's  
voltage regulator checked.  
Maintenance  
If you have problems, do not attempt to repair the unit  
yourself. Return it to your Alpine dealer or the nearest  
Alpine Service Station for servicing.  
Installation Location  
Make sure the TDM-7582E will not be installed in a  
location subjected to:  
Direct sun and heat  
High humidity and water  
Excessive dust  
Excessive vibrations  
Handling the Detachable Front Panel  
Do not expose to rain or water.  
Do not drop or apply shock.  
3-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
2
MODE/LOUD  
POWER  
CLOCK  
c
A.S.U.  
ZERO  
HOUR  
MIN  
1
Detaching the Front Panel  
Initial System Start-Up  
1
2
Press the POWER button to turn off the power.  
1
Immediately after installing or applying power to  
the unit, it should be initialized. To do this, first,  
remove the detachable front panel. Behind the  
front panel, to the right of the connector, there is  
a small hole. Using a pencil or other pointed  
object, press the red Reset switch mounted  
behind this hole to complete the initialization  
procedure.  
Press the (Release) button until the front  
panel pops out.  
3
Grasp the left side of the front panel and pull it  
out.  
NOTES  
The front panel may become hot (especially the connector  
terminals). This is not a malfunction.  
To protect the front panel, place it in the supplied carrying  
case.  
Reset switch  
Automatic Setup (A.S.U.)  
This convenient feature sets up the unit  
automatically after installation.  
Attaching the Front Panel  
1
Press the POWER button to turn on the unit.  
NOTE  
1
First, insert the right side of the front panel into  
the main unit. Align the 2 small holes on the front  
panel with the 2 projections on the main unit.  
When Power is turned on for the very first time, the  
A.S.U. (Automatic Set-Up) function will be initiated  
automatically. See A.S.U. description below.  
2
Push the left side of the front panel until it locks  
firmly into the main unit.  
2
1
1
NOTE  
Before attaching the front panel, make sure that there is no  
dirt or dust on the connector terminals and no foreign object  
between the front panel and the main unit.  
4-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Press and hold the A.S.U. (Automatic Setup)  
button for at least 3 seconds to activate the  
A.S.U. mode.  
"ASU" blinks in the display.  
The unit automatically performs the following  
operations.  
2
Press the Kor Lbutton until the desired sound  
is obtained in each mode.  
NOTE  
The BASS and TREBLE settings for each source (FM,  
AM, TAPE, and CD) are automatically memorized. These  
settings remain until you manually change them.  
1. Activates the Auto Memory mode.  
2. Gradually sets the Bass, Treble, Balance and  
Fader controls to their center positions.  
3. Gradually increases the volume to the  
position 12 in the display.  
Displaying Time  
1
Press the CLOCK button to display the time. The  
unit displays the clock time.  
NOTE  
4. Turns the Loudness on.  
Selecting any of the tuner, tape and CD functions while  
in the clock mode will interrupt the time display  
momentarily. The function selected will be displayed for  
about 5 seconds before the time returns to the display.  
5. Ends the A.S.U. mode.  
Turning Power On and Off  
2
Press the CLOCK button to turn off the time and  
to show other functions.  
1
Press the POWER button to turn on the unit.  
NOTE  
The unit can be turned on by pressing any other button  
except the eject c button.  
Setting Time  
The volume level gradually increases to the  
previous level you were listening to before the  
unit was turned off. Press the POWER button  
again to turn off the unit.  
1
Press and hold the CLOCK button for at least 2  
seconds while the display is showing the time.  
The time indication will begin to blink (for 5  
seconds).  
2
3
4
Press the ZERO button while the time indication  
is blinking to set seconds to "0."  
Turning Loudness On/Off  
Press the HOUR button to adjust the hours while  
the time indication is blinking.  
Loudness introduces a low- and high-frequency  
emphasis to compensate for the ear's decreased  
sensitivity to bass and treble sound at low  
listening levels.  
Press the MIN button to adjust the minutes while  
the time indication is blinking.  
The time indication will stop blinking 5 seconds  
after the last adjustment. The time will  
automatically be set.  
1
Press and hold the LOUD button for at least  
2 seconds to activate or deactivate the loudness  
mode. The display shows "LOUD" when the  
loudness mode is activated.  
Adjusting Volume/Bass/Treble/  
Balance (Between Left and Right)/  
Fader (Between Front and Rear)  
1
Press the MODE button repeatedly to choose  
the desired mode.  
Each press changes the modes as follows:  
VOL  
BAS  
TRE  
FAD ←  
BAL ←  
NOTE  
If the Kor Lbutton is not pressed within 5 seconds  
after selecting BASS, TREBLE, BALANCE, or FADER  
mode, the unit automatically returns to VOLUME mode.  
5-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio Operation  
BAND/D.A.P.  
SOURCE  
g DN  
f UP  
Preset buttons (1 through 6)  
TUNE / A.ME  
4
Press the g DN or f UP button to  
automatically seek for a station downward or  
upward respectively.  
The unit will stop on the next station it finds.  
Press the same button again to seek the next  
station.  
Manual Tuning  
1
Press the SOURCE button until radio frequency  
appears in the display.  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the radio bands as follows:  
Manual Storing of Station Presets  
F1 F2 AM  
1
Select the radio band and tune in a desired radio  
station you wish to store in the preset memory.  
3
4
Press the TUNE button repeatedly until "DX  
SEEK" and "SEEK" disappears from the display.  
NOTE  
2
Press and hold the Preset buttons (1 through  
6) that you want to store the station on for at  
least 2 seconds.  
The selected station is stored.  
The display shows the band, preset No. with a  
triangle (9) and station frequency memorized.  
The initial mode is DX SEEK.  
Press the g DN or f UP button to move  
downward or upward one step respectively until  
the desired station frequency is displayed.  
NOTE  
"ST" indicator appears when a stereo FM station is tuned  
in.  
3
Repeat the procedure to store up to 5 other  
stations onto the same band.  
To use this procedure for other bands, simply  
select the band desired and repeat the  
procedure.  
Automatic Seek Tuning  
1
Press the SOURCE button until radio frequency  
appears in the display.  
A total of 24 stations can be stored in the preset  
memory (6 stations for each band; FM1, FM2,  
AM and D.A.P.).  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the radio bands as follows:  
NOTE  
If you store a station in a preset memory which already  
has a station, the current station will be cleared and  
replaced with the new station.  
F1 F2 AM  
3
Press the TUNE button to illuminate the DX and  
SEEK indicators in the display.  
With the DX mode activated, both strong and  
weak stations will be tuned in the Auto-Seek  
operation.  
Press again to return to the local mode. The DX  
indicator will turn off and the SEEK indicator will  
remain illuminated. Now, only strong stations will  
be tuned.  
6-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Automatic Memory of Station  
Presets  
Tuning to Preset Stations  
1
Press the SOURCE button until the radio  
frequency appears in the display.  
1
Press the SOURCE button until the radio  
frequency appears in the display.  
2
Press the BAND button repeatedly until the  
desired band is displayed.  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the radio bands as follows:  
F1 F2 AM  
Each press changes the radio bands as follows:  
F1 F2 AM  
To select the D.A.P. band, press and hold the  
D.A.P. button for at least 2 seconds until the  
D.A.P. indicator appears in the display.  
3
Press and hold the A. ME button for at least 2  
seconds.  
The frequency on the display continues to  
change while the automatic memory is in  
progress.  
The tuner will automatically seek and store 6  
strong stations in the selected band in order of  
signal strength.  
3
Press the station preset button that has your  
desired radio station in memory.  
The display shows the band, preset number with  
a triangle and frequency of the station selected.  
When the automatic memory has been  
completed, the tuner goes to the station stored in  
the preset location No. 1.  
NOTE  
If no stations are stored, the tuner will return to the  
original station you were listening to before the auto  
memory procedure began.  
Storing into Direct Access Preset  
(D.A.P.) Band  
A combination of radio stations in any band (up to  
6 stations) can be manually preset into the D.A.P.  
band.  
1
Press and hold the D.A.P. button for at least 2  
seconds until the D.A.P. indicator appears.  
Press the BAND button to select FM or AM.  
The selected band will be displayed.  
To memorize stations onto the D.A.P. band,  
follow the steps for the automatic or Manual  
Storing of Station Presets section above.  
NOTE  
When using the Automatic Memory function with D.A.P.,  
the first 3 presets will be filled with FM stations and the  
last 3 are filled with AM stations.  
To cancel the D.A.P. mode, press and hold the  
D.A.P. button for at least 2 seconds. The D.A.P.  
indicator will turn off.  
7-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cassette Player Operation  
PROG  
c
REPEAT  
SOURCE  
g DN  
f UP  
:/J  
P.S.DN  
P.S.UP  
B.SKIP  
Inserting/Ejecting Cassette  
Normal Play  
1
Insert a cassette tape into the slot with the open  
side facing right.  
1
Insert a cassette tape into the slot with the open  
side facing to the right.  
The player automatically starts tape playback  
and the display shows "TAPE" and the tape side  
being played ( or ).  
When the end of the tape is reached, the player  
automatically reverses the tape direction and  
plays the other side of the tape.  
When the cassette is loaded, the player  
automatically starts tape playback and indicates  
"TAPE" in the display.  
If a tape is already loaded in the cassette player,  
press the SOURCE button to select the TAPE  
mode.  
2
Press the Eject (c) button when you want to  
eject the cassette tape.  
2
3
Press the :/J button to pause the tape  
playback.  
Both tape direction indicators appear during the  
pause mode.  
Press again to resume the tape playback.  
Press the Eject (c) button to stop the tape play  
and eject the cassette.  
The tape-direction indicator disappears.  
NOTES  
When power is turned off or the front panel is  
removed, the full-logic mechanism will automatically  
switch to the PAUSE mode. This protects the tape from  
being deformed by the pinch-rollers if left for long  
periods.  
Repeat Play  
1
Press the REPEAT button and the "REPEAT"  
indicator appears in the display.  
The current programme will be played back  
repeatedly.  
Auto Metal  
When a metal cassette tape is inserted, the player  
automatically adjusts the equalization for metal or any  
other high bias tape for optimum sound.  
The display shows "MTL."  
Press the REPEAT button to stop the repeat  
play.  
The "REPEAT" indicator disappears.  
8-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fast Forward and Rewind  
Programme Sensor (P.S.)  
1
Press the g DN or f UP button during  
tape play to fast rewind or forward the tape  
respectively.  
1
Press the P.S. DN button once during tape play  
to return to the beginning of the current selection  
being played.  
The tape side indicator  
or  
blinks indicating  
If you wish to return to the beginning of a  
selection further back, press repeatedly until the  
number of selections you would like to skip is  
shown in the display.  
The display will show PS-1 with the first press  
and will increase by one with each successive  
press up to PS-9. The tape indicator will blink  
showing the direction of your search.  
the direction of the tape. When the end of the  
tape is reached in the fast rewind mode, the  
player stops automatically and begins playing  
from the beginning of the same side.  
When the end of the tape is reached in the fast  
forward mode, the player stops automatically and  
begins playing from the beginning of the  
opposite side.  
Press the P.S. UP button once during tape play  
to advance to the beginning of the next selection.  
If you wish to advance to the beginning of a  
selection further ahead, press repeatedly until  
the number of selections you would like to skip is  
shown in the display.  
2
Press the f UP button during forwarding to  
stop fast forwarding and resume tape play.  
Press the g DN button during rewinding to  
stop rewinding and resume tape play.  
The tape side indicator stops blinking.  
The display will show PS+1 with the first press  
and will increase by one with each successive  
press up to PS+9. The tape indicator will blink  
showing the direction of your search during  
searching operation.  
Blank Skip (B.SKIP)  
1
Press the B.SKIP button during tape play to skip  
over blank portions of the tape lasting 15  
seconds or longer, "B.SKIP" appears on the  
display.  
NOTES  
The programme sensor feature is functional in the tape  
play mode only.  
Press the B.SKIP button to cancel the blank skip  
mode.  
"B.SKIP" disappears from the display.  
You can advance to the 9th (max.) programme or  
return to the 8th (max.) programme.  
Manual Reverse  
1
Press the PROG button during tape play to  
change the direction of play.  
The tape side indicators ( and ) change to  
show which side of the cassette is being played.  
9-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD Changer Operation  
SOURCE  
REPEAT/M.I.X.  
CLOCK  
g DN  
f UP  
:/J  
Preset buttons  
Controlling CD Changer (Optional)  
Music Sensor (M.S.) Skip  
1
Momentarily press the g DN button once to  
return to the beginning of the current track.  
If you wish to return to the beginning of a track  
further back, repeatedly press until you reach the  
desired track.  
The CD controls on the TDM-7582E will function  
only when a CD Changer (M-Bus) is connected.  
1
2
Press the SOURCE button to activate the CD  
Changer.  
The display shows the disc number and track  
number.  
Press the f UP button once to advance to the  
beginning of the next track.  
If you wish to advance to the beginning of a track  
further ahead, press repeatedly until the desired  
track is reached.  
NOTE  
To start play or pause playback, press the :/J button.  
NOTE  
When a 6-disc CD Changer is connected:  
Press the Preset buttons to select the desired  
disc loaded in the CD Changer.  
The music sensor feature is functional in the play or  
pause mode.  
Fast Forward and Backward  
Switching between Track No. and  
Elapsed Time Displays  
1
Press and hold the g DN or f UP button to  
quickly move backward or forward respectively  
until you reach the desired portion.  
1
Each press of the CLOCK button during CD  
playback causes change of the display between  
the track number and clock time.  
NOTE  
This feature works only in the CD playback mode.  
2
Press and hold the CLOCK button for at least 2  
seconds while the track number is displayed.  
The display changes to show the elapsed time  
for the track being played.  
Repeat Play on Single Track or  
Entire Disc  
1
Press the REPEAT button to display "REPEAT"  
or "REPEAT ALL" to play back repeatedly the  
current track being played or the entire disc  
selected.  
NOTE  
Single track cannot be repeated during M.I.X. play.  
10-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M.I.X. (Random) Play  
1
Press and hold the M.I.X. button in CD play for at  
least 2 seconds to turn on the M.I.X. mode.  
When this mode is turned on, the tracks on the  
currently playing disc will be played back in a  
random sequence.  
To cancel the M.I.X. mode, press and hold the  
M.I.X. button for at least 2 seconds.  
The "M.I.X." indicator disappears from the  
display.  
NOTE  
Single track cannot be repeated during M.I.X. play.  
11-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
CD  
In Case of Difficulty  
CD Changer not functioning.  
• Out of operating temperature range +50˚C (+120˚F)  
for CD.  
- Allow the vehicle's interior (or trunk) temperature to  
cool.  
CD playback sound is wavering.  
• Moisture condensation in the CD Module.  
- Allow enough time for the condensation to evaporate  
(about 1 hour).  
If you encounter a problem, please turn the power  
off, then on again. If the unit is still not functioning  
normally, please review the items in the following  
checklist. This guide will help you isolate the  
problem if the unit is at fault. Otherwise, make  
sure the rest of your system is properly connected  
or consult your authorized Alpine dealer.  
Unable to fast forward or backward the CD.  
• The CD has been damaged.  
Basic  
- Eject the CD and discard it; using a damaged CD in  
your unit can cause damage to the mechanism.  
CD playback sound skips due to vibration.  
• Improper mounting of the CD Changer.  
- Securely re-mount the CD Changer.  
• Disc is very dirty.  
- Clean the disc.  
• Disc has scratches.  
- Change the disc.  
CD playback sound skips without vibration.  
• Dirty or scratched disc.  
No function or display.  
Vehicle's ignition is off.  
- If connected following instructions, the unit will not  
operate with the vehicle's ignition off.  
• Improper power lead connections.  
- Check power lead connections.  
• Blown fuse.  
- Check the fuse on the battery lead of the unit; replace  
with the proper value if necessary.  
- Clean the disc; damaged disc should be replaced.  
Single (8 cm) disc does not play.  
• Single CD adaptor is not used.  
- Attach a single CD adaptor (recommended by Alpine)  
to the single disc and insert into the CD magazine.  
Radio  
Unable to receive stations.  
• No antenna or open connection in cable.  
- Make sure the antenna is properly connected; replace  
the antenna or cable if necessary.  
Unable to tune stations in the seek mode.  
You are in a weak signal area.  
- Make sure the tuner is in the DX mode.  
• If the area you are in is a primary signal area, the  
antenna may not be grounded and connected properly.  
- Check your antenna connections; make sure the  
antenna is properly grounded at its mounting location.  
• The antenna may not be the proper length.  
- Make sure the antenna is fully extended; if broken,  
replace the antenna with a new one.  
Broadcast is noisy.  
• The antenna is not the proper length.  
- Extend the antenna fully; replace it if it is broken.  
• The antenna is poorly grounded.  
- Make sure the antenna is grounded properly at its  
mounting location.  
Cassette  
Tape playback sounds dull.  
• The tape head needs cleaning.  
- Clean the tape head.  
12-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Indication for CD Changer  
– – – H  
Specifications  
FM TUNER SECTION  
Tuning Range  
87.5 108.0 MHz  
Protective circuit is activated due to high temperature.  
- The indicator will disappear when the temperature  
returns to within operation range.  
Mono Usable Sensitivity  
50 dB Quieting Sensitivity  
Alternate Channel Selectivity 80 dB  
9.3 dBf (0.8 µV/75 ohms)  
13.5 dBf (1.3 µV/75 ohms)  
Signal-to-Noise Ratio  
Stereo Separation  
Capture Ratio  
65 dB  
35 dB  
2.0 dB  
E - 01  
Malfunction in the CD Changer.  
- Consult your Alpine dealer. Press the magazine eject  
button and pull out the magazine.  
AM TUNER SECTION  
Tuning Range  
Usable Sensitivity  
531 1,602 kHz  
22.0 µV  
Check the indication. Insert the magazine again.  
If the magazine cannot be pulled out, consult your  
Alpine dealer.  
TAPE PLAYER SECTION  
Tape Speed  
Wow & Flutter  
Tape Signal-to-Noise Ratio  
Frequency Response  
With Alpine Test Tape  
1-7/8 ips (4.8 cm/sec) 0.7%  
0.06%  
60 dB  
Magazine ejection not possible.  
- Press the magazine eject button. If the magazine does  
not eject, consult your Alpine dealer.  
3020,000 Hz ( 3 dB)  
– – – –  
GENERAL  
Power Requirement  
No magazine is loaded into the CD Changer.  
- Insert a magazine.  
14.4 V DC  
(1116 V allowable)  
Maximum Pre-Output Voltage 2 V/10k ohms  
Maximum Power Output*  
Continuous Power Output**  
45 W × 4  
19.5 W × 4  
T – – –  
Output Voltage  
Bass  
Treble  
500 mV/10 k ohms  
15 dB at 30 Hz  
10 dB at 10 kHz  
1.4 kg (3 lbs. 1 oz)  
No indicated disc.  
- Choose another disc.  
Weight  
EEEE  
CHASSIS SIZE  
Width  
Height  
Misconnection or disconnection of CD Changer.  
- Check connection between CD Changer and control  
unit.  
178 mm (7")  
50 mm (2")  
155 mm (6-1/8")  
Depth  
NOSEPIECE SIZE  
Width  
Height  
Depth  
170 mm (63/4")  
46 mm (1-13/16")  
19 mm (3/4")  
Due to continuous product improvement, specifications and  
design are subject to change without notice.  
*
Under maximum operating voltage and input signal,  
into 4 ohms.  
** 0.8% THD, at 14.4 V battery voltage.  
13-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Connections  
Before installing or connecting the unit, please  
read the following and pages 2 and 3 of this  
manual thoroughly for proper use.  
HAVE THE WIRING AND INSTALLATION DONE BY  
EXPERTS.  
The wiring and installation of this unit requires special  
technical skill and experience. To ensure safety, always  
contact the dealer where you purchased this product to  
have the work done.  
Warning  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE  
USE SPECIFIED ACCESSORY PARTS AND INSTALL  
THEM SECURELY.  
Be sure to use only the specified accessory parts. Use of  
other than designated parts may damage this unit  
internally or may not securely install the unit in place.  
This may cause parts to become loose resulting in hazards  
or product failure.  
GROUND.  
(Check with your dealer if you are not sure.) Failure to do  
so may result in fire, etc.  
BEFORE WIRING, DISCONNECT THE CABLE FROM  
THE NEGATIVE BATTERY TERMINAL.  
Failure to do so may result in electric shock or injury due  
to electrical shorts.  
DO NOT INSTALL IN LOCATIONS WITH HIGH  
MOISTURE OR DUST.  
Avoid installing the unit in locations with high incidence  
of moisture or dust. Moisture or dust that penetrates into  
this unit may result in product failure.  
DO NOT SPLICE INTO ELECTRICAL CABLES.  
Never cut away cable insulation to supply power to other  
equipment. Doing so will exceed the current carrying  
capacity of the wire and result in fire or electric shock.  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT  
HINDER VEHICLE OPERATION, SUCH AS THE  
STEERING WHEEL OR SHIFT LEVER.  
Doing so may obstruct forward vision or hamper  
movement etc. and results in serious accident.  
Precautions  
Be sure to disconnect the cable from the (–) battery post  
before installing your TDM-7582E. This will reduce  
any chance of damage to the unit in case of a short-  
circuit.  
Be sure to connect the color coded leads according to  
the diagram. Incorrect connections may cause the unit  
to malfunction or damage to the vehicle’s electrical  
system.  
When making connections to the vehicle’s electrical  
system, be aware of the factory installed components  
(e.g. on-board computer). Do not tap into these leads to  
provide power for this unit. When connecting the  
TDM-7582E to the fuse box, make sure the fuse for the  
intended circuit of the TDM-7582E has the appropriate  
amperage. Failure to do so may result in damage to the  
unit and/or the vehicle. When in doubt, consult your  
ALPINE dealer.  
The TDM-7582E uses female RCA-type jacks for  
connection to other units (e.g. amplifier) having RCA  
connectors. You may need an adaptor to connect other  
units. If so, please contact your authorized ALPINE  
dealer for assistance.  
Be sure to connect the speaker (–) leads to the speaker  
(–) terminal. Never connect left and right channel  
speaker cables to each other or to the vehicle body.  
DO NOT DAMAGE PIPE OR WIRING WHEN  
DRILLING HOLES.  
When drilling holes in the chassis for installation, take  
precautions so as not to contact, damage or obstruct pipes,  
fuel lines, tanks or electrical wiring. Failure to take such  
precautions may result in fire.  
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR  
STEERING SYSTEMS TO MAKE GROUND  
CONNECTIONS.  
Bolts or nuts used for the brake or steering systems (or  
any other safety-related system), or tanks should NEVER  
be used for installations or ground connections. Using  
such parts could disable control of the vehicle and cause  
fire etc.  
MAKE THE CORRECT CONNECTIONS.  
Failure to make the proper connections may result in fire  
or product damage.  
Caution  
IMPORTANT  
Please record the serial number of your unit in the  
space provided below and keep it as a permanent  
record. The serial number plate is located on the  
bottom of the unit.  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR  
PINCHED BY A SHARP METAL EDGE.  
Route the cables and wiring away from moving parts (like  
the seat rails) or sharp or pointed edges. This will prevent  
crimping and damage to the wiring. If wiring passes  
through a hole in metal, use a rubber grommet to prevent  
the wire’s insulation from being cut by the metal edge of  
the hole.  
SERIAL NUMBER:  
INSTALLATION DATE:  
INSTALLATION TECHNICIAN:  
PLACE OF PURCHASE:  
14-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
3
1
Mounting sleeve  
(Included)  
Dashboard  
Lock Pin  
Slide the TDM-7582E into the dashboard. When  
the unit is in place, make sure the locking pins are  
fully seated in the down position. This can be done  
by pressing firmly in on the unit while pushing the  
locking pin down with a small screwdriver. This  
ensures that the unit is properly locked and will not  
accidentally come out from the dashboard. Install  
the Detachable Front Panel.  
TDM-7582E  
Remove the Detachable Front Panel (refer to page  
4). Slide mounting sleeve from main unit. Slide the  
mounting sleeve into the dashboard.  
Removal  
2
1. Remove the Detachable Front Panel.  
2. Use a small screwdriver (or similar tool) to  
push the locking pins to the "up" position  
(see above drawing). As each pin is  
unlocked, gently pull out on the unit to make  
sure it does not re-lock before unlocking the  
second pin.  
Metal Mounting  
Strap  
Screw  
Bolt Stud  
3. Pull the unit out, keeping it unlocked as you  
do so.  
Hex Nut (M5)  
<JAPANESE CAR>  
Ground Lead  
Chassis  
TDM-7582E  
Reinforce the head unit with the metal mounting  
strap (not supplied). Secure the ground lead of the  
unit to a clean metal spot using a screw () already  
attached to the vehicle's chassis.  
Face Plate  
Connect each input lead coming from an amplifier  
or equalizer to the corresponding output lead  
coming from the left rear of the TDM-7582E.  
Connect all other leads of the TDM-7582E  
according to details described in the  
Screw (M5 × 8)  
(Included)  
CONNECTlONS section.  
TDM-7582E  
Ground Lead  
Mounting Bracket  
15-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Connections  
Connections  
Antenna  
Blue  
POWER ANT  
2
3
To power antenna  
REMOTE  
TURN-ON  
Blue/White  
To amplifier or equaliser  
IGNITION  
BATTERY  
4
6
Red  
Ignition Key  
Yellow  
5
GND  
Black  
7
Battery  
TDM-7582E  
A
DIN Connector PIN Configuration.  
1
~
Power Supply Ground  
lgnition  
)
Shield Ground  
Data Ground  
Lch  
SIG GND  
Battery  
Data Bus  
A
8
+
Rch  
Grey  
9
SPEAKER  
RIGHT  
FRONT  
Gray/  
Black  
!
"
Front right  
Violet/  
Black  
SPEAKER  
RIGHT  
REAR  
Violet  
Green  
#
$
Rear right  
Speakers  
Rear left  
SPEAKER  
LEFT  
REAR  
Green/  
Black  
%
&
White/  
Black  
SPEAKER  
LEFT  
FRONT  
White  
(
Front left  
CD Changer  
(Sold Separately)  
Rear left  
,
Amplifier  
Rear right  
16-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Antenna Receptacle  
2 Power Antenna Lead (Blue)  
Connect this lead to the +B terminal of your power  
antenna, if applicable.  
NOTE  
This lead should be used only for controlling the vehicle's  
power antenna. Do not use this lead to turn on an  
amplifier or a signal processor, etc.  
3 Remote Turn-On Lead (Blue/White)  
Connect this lead to the remote turn-on lead of your  
amplifier or signal processor.  
4 Switched Power Lead (Ignition) (Red)  
Connect this lead to an open terminal on the vehicle's  
fuse box or another unused power source which  
provides (+) 12V only when the ignition is turned on  
or in the accessory position.  
5 Fuse Holder (15A)  
6 Battery Lead (Yellow)  
Connect this lead to the positive (+) post of the  
vehicle's battery.  
7 Ground Lead (Black)  
Connect this lead to a good chassis ground on the  
vehicle. Make sure the connection is made to bare  
metal and is securely fastened using the sheet metal  
screw provided.  
8 Power Supply Connector  
9 Right Front (+) Speaker Output Lead (Grey)  
! Right Front (–) Speaker Output Lead (Grey/  
Black)  
" Right Rear (–) Speaker Output Lead (Violet/  
Black)  
# Right Rear (+) Speaker Output Lead (Violet)  
$ Left Rear (+) Speaker Output Lead (Green)  
% Left Rear (–) Speaker Output Lead (Green/Black)  
& Left Front (–) Speaker Output Lead (White/Black)  
( Left Front (+) Speaker Output Lead (White)  
) DIN Connector  
Connect this to the DIN connector on the CD  
Changer.  
~ Rear Output RCA Connectors  
RED is right and WHITE is left.  
+ DIN Extension Cable  
NOTE  
For some installations, an L-type DIN connector would  
simplify installation. Use the Alpine 491002 Adapter (Sold  
Separately) if your changer did not include an L-type  
DIN.  
, RCA Extension Cable (Sold Separately)  
17-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Acer Laptop HT141WX1 100 User Manual
Acer Network Router AIR 104 User Manual
ADC Switch ICX 250 User Manual
Advantech Computer Hardware PCM 9588 User Manual
Alliance Laundry Systems Clothes Dryer T453I User Manual
Alps Electric Switch SKRN Series User Manual
Amana Washer Dryer NTW5245T User Manual
American Dryer Corp Clothes Dryer ADG MLG 170DR User Manual
AO Smith Water Heater 970 Series User Manual
Avocent Network Card CCM4850 User Manual