EN
FR
ES
R
ADVANCED BLUETOOTH CD RECEIVER
CDE-133BT
• OWNER’S MANUAL
Please read before using this equipment.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
Thank you for purchasing this Alpine product. Please take a moment to protect your purchase by
You will be informed of product and software updates (if applicable), special promotions, news
about Alpine, and entered for a chance to win prizes.
Merci d’avoir acheté ce produit Alpine. Nous vous invitons à consacrer un moment à la protection
de votre achat en enregistrant votre produit dès maintenant à l’adresse suivante :
Vous serez tenu informé des mises à jour des produits et des logiciels (le cas échéant), des
promotions spéciales, de l’actualité d’Alpine, et vous aurez une chance de remporter des prix.
Gracias por adquirir este producto Alpine. Con solo unos pocos pasos podrá proteger su producto,
Recibirá información sobre nuevos productos y software, promociones especiales, novedades sobre
Alpine y participará en el sorteo de premios.
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
Phone 1-800-ALPINE-1 (1-800-257-4631)
Designed by ALPINE Japan
68-21627Z13-A
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Contents
Adjusting the Parametric Equalizer Curve
Connecting to an External Amplifier
How to connect to a BLUETOOTH
Pairing a BLUETOOTH compatible device with
Pairing a BLUETOOTH compatible device
Setting the BLUETOOTH Connection
Adjusting Subwoofer Level/Bass Level/Middle
Level/Treble Level/Balance (Between Left and
Loudness/Defeat...................................................... 13
Pairing a BLUETOOTH Device from the
3-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Contents
Setting the caller information display/
Select Playlist/Artist/Album/Genre/
Setting the Received Calls automatically
Displaying the phone service provider
Preset a number in the Phone Book
Adjusting the volume when receiving a
Muting the microphone input quickly
Playing MP3 Files from Flash Memory
4-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
CAUTION
This symbol means important instructions. Failure
to heed them can result in injury or material
property damage.
WARNING
WARNING
This symbol means important instructions. Failure
to heed them can result in serious injury or death.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY
FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do so
may result in an accident.
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE
NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
Temperature
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and −10°C (+14°F) before turning your unit on.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
Damaged Disc
DO NOT DISASSEMBLE OR ALTER.
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service Station
for servicing.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF
CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult
a physician immediately.
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION
SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“ERROR” will be displayed on your player if you insert a disc
incorrectly. If “ERROR” continues to be displayed even though the
5-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
disc has been inserted correctly, push the RESET button with a
pointed object such as a ballpoint pen.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
New Discs
To prevent the CD from jamming, “ERROR” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the center hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then
insert the disc again.
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
CD players.
Center Hole
Center Hole
New Disc
Outside
(Bumps)
Bumps
Transparent Sheet
Disc Stabilizer
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use any
special shape discs.
Use of special shape discs may cause damage to the mechanism.
On handling Compact Discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that there are no bumps around the disc.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time. Never
expose the disc to direct sunlight. Heat and humidity may damage
the CD and you may not be able to play it again.
Installation Location
Make sure this unit will not be installed in a location subjected to:
To customers using CD-R/CD-RW
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
•
If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
•
Finalize the CD-R/CD-RW if necessary, and attempt playback again.
Excessive vibrations
About media that can be played
Use only compact discs with the label side showing the CD logo
marks below.
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordables)/CD-RWs
(CD-ReWritables) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3 formatted
audio files.
INCORRECT
CORRECT
•
Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g. left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a recording failed
or a re-recording was attempted, copy-protected CDs which do not
conform to the audio CD industry standard.
Disc Cleaning
•
•
Use discs with MP3 files written in a format compatible with this
Fingerprints, dust, or soil on the surface of the disc could cause the
CD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the center of the disc to the outer edge.
ROM data other than audio files contained in a disc will not produce
sound when played back.
6-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting the USB Connection Terminal
•
•
iPhone, iPod, iPod classic, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
“Made for iPod,” and “Made for iPhone,” mean that an electronic
accessory has been designed to connect specifically to iPod, or
iPhone, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPod, or
iPhone may affect wireless performance.
•
Only USB Flash Memory devices can be connected to the USB
connection terminal on this unit. Correct performance using other
USB products cannot be guaranteed. A USB hub is not supported.
Depending on the shape or size of a Flash Memory, it may not be
connected to the USB terminal of this unit-a USB cable (sold
separately) is recommended for this connection.
•
Also, avoid connecting Flash Memory and Front Aux at the same
time.
If a USB device is inserted in the unit, it projects out and may be a
danger while driving. Use a commercially available USB extension
cable, and connect it in a safe way.
Depending on the connected Flash Memory device, the unit may not
function or some functions may not be performed.
The audio file format that can be played back on the unit is MP3.
Artist/song name, etc., can be displayed, however characters may not
be correctly displayed.
®
•
•
•
The BLUETOOTH word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by Alpine Electronics, Inc. is under license.
“MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.”
“Supply of this product only conveys a license for private,
non-commercial use and does not convey a license nor imply any
right to use this product in any commercial (i.e. revenue-generation)
real time broadcasting (terrestrial, satellite, cable and/or any other
media), broadcasting/streaming via internet, intranets and/or other
networks or in other electronic content distribution systems, such as
pay-audio or audio-on-demand applications. An independent
license for such use is required. For details, please visit
http://www.mp3licensing.com”
•
•
•
•
On Handling Flash Memory
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data,
etc., is lost while using this product.
•
To prevent malfunction or damage, note the following points.
Read the Flash Memory Owner’s Manual thoroughly.
Do not touch the terminals by hand or metal.
Do not subject Flash Memory to excessive shock.
Do not bend, drop, disassemble, modify or soak in the water.
Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high temperatures.
Anywhere the possibility of high humidity or corrosive substances is
present.
Fix the Flash Memory in a location where driver operation will not be
hindered.
•
•
•
•
•
Flash Memory may not function correctly at high or low temperature.
The USB Flash Memory supports only 512 or 2,048 bytes per sector.
Use only certified Flash Memory. Note that even certified Flash
Memory, may not function correctly depending on its type or state.
Flash Memory function is not guaranteed. Use Flash Memory
according to the terms of agreement.
Depending on the settings of the Flash Memory type, memory state
or encoding software, the unit may not play back or display properly.
A file that is copy-protected (copyright protection) cannot be played
back.
•
•
•
•
Flash Memory may take time to start playback. If there is a particular
file other than audio in the Flash Memory, it may take considerable
time before the file is played back or searched.
•
•
The unit can play back “mp3” file extension.
Do not add the above extension to a file other than audio data. This
non-audio data will not be recognized. The resulting playback may
contain noise that can damage speakers and/or amplifiers.
It is recommended to back up important data on a personal
computer.
•
•
Do not remove the USB device while playback is in progress. Change
SOURCE to something other than USB, and then remove the USB
device to prevent possible damage to its memory.
7-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press e at the lower left side until the front panel pops
out.
Getting Started
Grasp the left side of the front panel and pull it out.
SOURCE/
Rotary encoder
ENTER
Notes
•
The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
•
•
To protect the front panel, place it in the supplied carrying case.
When detaching the front panel, do not apply excessive force as it may
result in malfunction.
AUDIO/SETUP
e
Attaching
Accessory List
1
2
Insert the right side of the front panel into the main unit.
Align the groove on the front panel with the projections
on the main unit.
•
•
•
•
•
•
•
•
Head Unit ..................................................................................1
Power Cable ..............................................................................1
Microphone ..............................................................................1
Mounting Sleeve ......................................................................1
Carrying Case............................................................................1
Bracket key ...............................................................................2
Screw (M5 × 8) ..........................................................................4
Owner’s Manual..................................................................1 set
Push the left side of the front panel until it locks firmly into
the main unit.
Turning Power On and Off
Press SOURCE to turn on the unit.
Note
Notes
•
The unit can be turned on by pressing any other button except and
e.
•
Before attaching the front panel, make sure that there is no dirt or dust
on the connector terminals and no foreign object between the front
panel and the main unit.
Press and hold SOURCE for at least 2 seconds to turn
off the unit.
•
Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Note
•
The first time power is turned on, the volume will start from level 12.
Initial System Start-Up
Source Selection
Be sure to press the RESET button when using the unit for the first time,
after changing the car battery, etc.
Press SOURCE to change the source.
1
2
3
Turn off the unit power.
TUNER DISC USB AUDIO/iPod*1 BT AUDIO*2
AUXILIARY*3 TUNER
Remove the detachable front panel.
Press RESET with a ballpoint pen or similar pointed object.
*1 Only when the iPod/iPhone is connected.
Detaching and Attaching the Front Panel
RESET button
Detaching
1
Turn off the unit power.
8-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Volume
Radio
Turn the Rotary encoder until the desired sound is
obtained.
SOURCE/
Rotary encoder
ENTER
Setting Time
1
2
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP selection mode.
Turn the Rotary encoder to select GENERAL, and then
press ENTER.
AUDIO GENERAL DISPLAY iPod BLUETOOTH
BAND
Preset buttons
(1 through 6)
TUNE/A.ME
3
4
Turn the Rotary encoder to select the CLOCK ADJ mode,
and then press ENTER.
The time indication will blink.
Listening to Radio
Turn the Rotary encoder to adjust the hours while the
time indication is blinking.
1
2
Press SOURCE to select TUNER mode.
5
6
When the hour has been adjusted, press ENTER.
Press BAND repeatedly until the desired radio band is
displayed.
Turn the Rotary encoder to adjust the minutes while the
time indication is blinking.
F1 (FM1) F2 (FM2) AM F1 (FM1)
3
Press TUNEA.ME to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode)
off (Manual mode) DX SEEK
7
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
Note
•
To synchronize the clock to another clock/watch or radio time
•
The initial mode is Distance mode.
announcement, press and hold ENTER for at least 2 seconds after
setting the “hour”. Minutes will reset to “00”. If the display shows over
“30” minutes when you do this, the time will advance one hour.
Pressing will return to the previous mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
•
•
Local mode:
Pressing and holding for at least 2 seconds will return to normal
mode.
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
•
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
Controllable with Remote Control
4
Press or to tune in the desired station.
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer. Point the optional remote
control transmitter at the remote-control sensor.
Holding down or will change the frequency
continuously.
Remote control sensor
Presetting Stations Manually
1
2
Select the radio band and tune in a desired radio station
you wish to store in the preset memory.
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish to store
the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
Notes
•
A total of 18 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2 and AM).
•
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
9-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting Stations Automatically
CD/MP3
1
2
Press BAND repeatedly until the desired radio band is
displayed.
SOURCE/
Rotary encoder
/ENTER
Press and hold TUNEA.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will automatically
seek and store 6 strong stations in the selected band. They will
be stored into preset buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
Note
If no stations are stored, the tuner will return to the original station you
were listening to before the auto memory procedure began.
1 2
4
5
•
Playback
Tuning to Preset Stations
1
Insert a disc with the label side facing up.
1
2
Press BAND repeatedly until the desired band is
displayed.
The disc will be pulled into the unit automatically.
Press any one of the station preset buttons (1 through 6)
that has your desired radio station in memory.
The display shows the band, preset number and frequency of
the station selected.
Frequency Search Function
Note
•
When a disc is already inserted, press SOURCE to switch to the
DISC mode.
You can search for a radio station by its frequency.
1
Press ENTER in Radio mode to activate Frequency
search mode.
2
3
While playing back MP3, press 1 or 2 to select the
desired folder.
The “” indicator lights up.
Pressing and holding 1 or 2 will change folders continuously.
2
3
Turn the Rotary encoder to select the desired frequency.
Press ENTER to receive the selected frequency.
Press or to select the desired track (file).
Pressing and holding or will fast backward/fast
forward track continuously.
Note
•
Press in the search mode to cancel. Or, the search mode will be
canceled if no operation is performed for 10 seconds.
4
5
To pause playback, press .
Pressing again will resume playback.
To eject the disc, press .
Notes
•
Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
The “” indicator lights up when a disc is inserted.
Three-inch (8 cm) CDs can not be used.
•
•
•
Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
•
•
•
The track display for MP3 data playback is the file numbers recorded on
the disc.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
During CD/MP3 playback, press , and then you can quickly return
to the hierarchy level selected last time in the search mode.
10-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Play
Folder/File Name Search (concerning MP3)
Folder and file names may be searched and displayed during playback.
1
Press a4.
The song is played back repeatedly.
a*1 a*2 (off) a
Folder Name Search mode
*1 Only a track/file is repeatedly played back.
*2 Only files in a folder are repeatedly played back. (MP3 mode
only)
1
2
During MP3 playback, press ENTER to activate the
search mode.
The “” indicator lights up.
2
To cancel repeat play, select (off) with the above
procedure.
Turn the Rotary encoder to select Folder Name Search
mode, and then press ENTER.
3
4
Turn the Rotary encoder to select the desired folder.
M.I.X. (Random Play)
Press and hold ENTER for at least 2 seconds to play
back the first file in the selected folder.
1
Press 5s.
The songs are played back in random sequence.
s*1 s*2 g*3/*4 (off) s
Notes
•
Press and hold for at least 2 seconds in the search mode to cancel.
Or, the search mode is canceled if no operation is performed for 10
seconds.
*1 The tracks are played back in random sequence. (CD mode
only)
•
•
To search for files in the Folder Name Search mode, press ENTER.
Files in the folder may be searched.
*2 Only files in a folder are played back in random sequence. (MP3
mode only)
Press to exit Folder Name Search mode in step 3 in order to select
File Name Search mode.
*3 The files in the disc are played back in random sequence. (MP3
mode only)
•
•
The root folder is displayed as “ROOT”.
*4 In the USB mode, all files stored in the Flash Memory are played
back in random sequence.
When Folder Name Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
2
To cancel M.I.X. play, select (off) with the above procedure.
File Name Search mode
1
2
During MP3 playback, press ENTER to activate the
search mode.
Searching for CD Text
The “” indicator lights up.
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made using
the track numbers associated with each song.
Turn the Rotary encoder to select File Name Search mode,
and then press ENTER.
1
2
Press ENTER during play.
This will set the search mode, and the “” indicator lights up.
3
4
Select the desired file by turning the Rotary encoder.
Press ENTER to play back the selected file.
Turn the Rotary encoder to select the desired track, and
then press ENTER.
Notes
•
Press and hold for at least 2 seconds in the search mode to cancel.
Or, the search mode is canceled if no operation is performed for 10
seconds.
This will play the selected track.
Notes
•
•
•
Press in the search mode to return to the previous mode.
When File Name Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
Press in the search mode to cancel. Or, the search mode is canceled
if no operation is performed for 10 seconds.
When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
•
•
Press 1 or 2 to select another Folder.
11-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Order of files
Files are played back in the order that the writing software writes them
to the disc. Therefore, the playback order may not be what is expected.
Verify the writing order in the software’s documentation. The playback
order of the folders and files is as follows.
About MP3
CAUTION
Except for private use, duplicating audio data (including MP3
data) or distributing, transferring, or copying it, whether for free
or for a fee, without permission of the copyright holder is strictly
prohibited by the Copyright Act and by international treaty.
Root folder
What is MP3?
MP3, whose official name is “MPEG Audio Layer 3,” is a compression
standard prescribed by the ISO, the International Standardization
Organization and MPEG which is a joint activity institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is capable of
compressing audio data at extremely high ratios, reducing the size of
music files to as much as one-tenth their original size. This is achieved
while still maintaining near CD quality. The MP3 format realizes such
high compression ratios by eliminating the sounds that are either
inaudible to the human ear or masked by other sounds.
Method for creating MP3 files
Audio data is compressed using software with MP3 codecs. For details
on creating MP3 files, refer to the user’s manual for that software.
MP3 files that are playable on this device have the file extensions “mp3”.
Files with no extension cannot be played back.
Supported playback sampling rates and bit rates
MP3
Sampling rates:
48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
12 kHz, 11.025 kHz, 8 kHz
Folder
MP3 File
Bit rates:
8 - 320 kbps
*
The folder No./ folder Name will not be displayed if no file is contained
in the folder.
This device may not play back correctly depending on sampling rates.
ID3 tags
This device supports ID3 tag v1 and v2.
If tag data is in an MP3 file, this device can display the title (track title),
artist name, and album name ID3 tag data.
Terminology
Bit rate
This is the “sound” compression rate specified for encoding. The higher
the bit rate, the higher the sound quality, but also the larger the files.
This device can only display single-byte alphanumeric characters (up to
30 for ID3 tags) and the underscore. For non-supported characters, “NO
SUPPORT” is displayed.
If information contains characters other than ID3 tag information, the
audio file may not be played back.
The tag information may not be correctly displayed, depending on the
contents.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz, so
the sound is sampled (recorded) 44,100 times per second. The higher
the sampling rate, the higher the sound quality, but also the larger the
volume of data.
Producing MP3 discs
MP3 files are prepared, then written to a CD-R or CD-RW using CD-R
writing software. A disc can hold up to 509 files/folders (including Root
Folders), and the maximum number of folders is 255.
Playback may not be performed if a disc exceeds the limitations
described above.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into the
specified audio compression format.
Media supported
The media that this device can play back are CD-ROMs, CD-Rs, and
CD-RWs.
Tag
Song information such as track titles, artist names, album names, etc.,
written into MP3 files.
Corresponding File Systems
Root folder
This device supports discs formatted with ISO9660 Level 1 or Level 2.
Under the ISO9660 standard, there are some restrictions to remember.
The maximum nested folder depth is 8 (including the root directory).
The number of characters for a folder/file name is limited.
Valid characters for folder/file names are letters A-Z (all caps), numbers
0-9, and ‘_’ (underscore).
The root folder (or root directory) is found at the top of the file system.
The root folder contains all folders and files. It is created automatically
for all burned discs.
This device also can play back discs in Joliet, Romeo, etc., and other
standards that conform to ISO9660. However, sometimes the file
names, folder names, etc., are not displayed correctly.
Formats supported
This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD
(CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with Track At
Once or packet writing.
12-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Setup
Sound Setting
You can flexibly customize the unit to suit your own preference and
usage. From the AUDIO SETUP menu, Audio Setting can be modified.
Rotary encoder
/ENTER
Use steps 1 to 5 to select one of the setting modes to modify.
See the applicable section below for details about the
selected setting item.
1
2
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
Turn the Rotary encoder to select AUDIO, and then press
ENTER.
AUDIO GENERAL DISPLAY iPod BLUETOOTH
AUDIO/SETUP
3
Turn the Rotary encoder to select the desired sound
setting menu, and then press ENTER.
(e.g. Select SUBWOOFER)
Adjusting Subwoofer Level/Bass Level/
Middle Level/Treble Level/Balance (Between
Left and Right)/Fader (Between Front and
Rear)/Loudness/Defeat
FACTORY EQ*1/*2 LOUDNESS*1 3BAND EQ*1/*3 VOL LV ADJ
HPF*1 SUBWOOFER SUBW LPF*1/*4 SUBW PHASE*4
SUBW SYS*4 POWER IC
*1 Adjustment cannot be performed when DEFEAT is set to ON.
*2 The FACTORY EQ’s setting value and 3BAND EQ’s setting
value are linkage.
1
Press AUDIOSETUP repeatedly to choose the desired
mode.
*3 The FACTORY EQ’s setting value and 3BAND EQ’s setting
value are linkage. In step 3, three sound adjustment items (Bass,
Mid and Treble) can be selected in 3BAND EQ mode, turn the
Rotary encoder to select the desired item, and then press
ENTER to continue to step 4.
Each press changes the mode as follows:
SUBWOOFER*1 BASS LEVEL*2 MID LEVEL*2 TRE LEVEL*2
BALANCE FADER LOUDNESS*2/*3 DEFEAT VOLUME
*4 These functions are inoperable when Subwoofer is set to OFF.
SUBWOOFER
*1 When the subwoofer mode is set to OFF, its level cannot be
adjusted.
*2 Adjustable only when DEFEAT is OFF.
4
5
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select SUBW ON or SUBW OFF)
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Subwoofer
Bass level
Middle level
Treble level
Balance
+0 ~ +15
-7 ~ +7
Notes
•
•
Pressing returns to the previous Sound menu mode.
-7 ~ +7
Pressing and holding for at least 2 seconds will return to normal
-7 ~ +7
mode.
L15 ~ R15
R15 ~ F15
ON/OFF
ON/OFF
0 ~ 35
•
If no operation is performed for 60 seconds, Sound menu mode is
canceled.
Fader
Loudness
Defeat
Equalizer Presets (F-EQ)
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
Volume
Note
Setting item: FACTORY EQ
•
If no operation is performed for 5 seconds, the unit automatically
returns to normal mode.
Setting contents:
USER / FLAT (Initial setting) / POPS / ROCK / NEWS / JAZZ /
ELEC DANCE / HIP HOP / EASY LIS / COUNTRY / CLASSICAL
2
Turn the Rotary encoder until the desired sound is
obtained in each mode.
By setting DEFEAT ON, previously adjusted settings of BASS,
MID, TRE LEVEL and LOUDNESS will return to the factory
defaults.
Turning Loudness On/Off
Loudness introduces a special low-and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
Setting item: LOUDNESS
Setting contents:
OFF (Initial setting) / ON
13-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Mid Bandwidth (WIDTH (Q))
Adjusting the Parametric Equalizer Curve
(3BAND EQ)
Turn the Rotary encoder to select the desired Mid
bandwidth.
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste. The setting of Bass, Mid and Treble can
be adjusted in this mode.
WIDE 0.75 MEDIUM 1.00 MEDIUM 1.25 NARROW 1.50
Setting the Mid Center Frequency (CENTER FRQ)
Setting item: 3BAND EQ
Turn the Rotary encoder to select the desired Mid center
frequency.
500 (Hz) 1.0k (Hz) 1.5k (Hz) 2.5k (Hz)
Further setting items: BASS / MID / TREBLE
Setting the Bass Control
Setting the Mid Level
Turn the Rotary encoder to select the desired Mid level
(-7 ~ +7) .
1
After selecting BASS from the 3BAND EQ adjustment
mode, turn the Rotary encoder to select the desired Bass
setting item, and then press ENTER.
*
You can emphasize or weaken the Mid level.
WIDTH (Q) CENTER FRQ LEVEL
*
“Adjusting Subwoofer Level/Bass Level/Middle Level/Treble Level/
2
3
Turn the Rotary encoder to select the desired setting
value, and then press ENTER.
Press to return to the previous step.
Setting the Treble Control
Setting the Bass Bandwidth (WIDTH (Q))
1
After selecting TREBLE from the 3BAND EQ adjustment
mode, turn the Rotary encoder to select the desired
Treble setting item, and then press ENTER.
Turn the Rotary encoder to select the desired bass
bandwidth.
WIDE 0.50 MEDIUM 1.00 MEDIUM 1.50 NARROW 2.00
Changes the boosted bass bandwidth to wide or narrow. A wider setting
will boost a wide range of frequencies above and below the center
frequency. A narrower setting will boost only frequencies near the
center frequency.
WIDTH (Q) CENTER FRQ LEVEL
2
3
Turn the Rotary encoder to select the desired setting
value, and then press ENTER.
Press to return to the previous step.
Setting the Bass Center Frequency (CENTER FRQ)
Setting the Treble Bandwidth (WIDTH (Q))
Turn the Rotary encoder to select the desired bass center
frequency.
60 (Hz) 80 (Hz) 100 (Hz) 120 (Hz)
Turn the Rotary encoder to select the desired treble
bandwidth.
WIDE 0.75 NARROW 1.25
Emphasize the displayed bass frequency ranges.
Setting the Treble Center Frequency (CENTER FRQ)
Setting the Bass Level
Turn the Rotary encoder to select the desired treble
center frequency.
7.5K (Hz) 10.0K (Hz) 12.5K (Hz) 15.0K (Hz)
Turn the Rotary encoder to select the desired bass level
(-7~+7) .
*
You can emphasize or weaken the bass level.
Setting the Treble Level
*
“Adjusting Subwoofer Level/Bass Level/Middle Level/Treble Level/
Turn the Rotary encoder to select the desired treble level
*
(-7~+7) .
You can emphasize or weaken the treble level.
Setting the Mid Control
*
“Adjusting Subwoofer Level/Bass Level/Middle Level/Treble Level/
1
After selecting MID from the 3BAND EQ adjustment mode,
turn the Rotary encoder to select the desired Mediant
setting item, and then press ENTER.
WIDTH (Q) CENTER FRQ LEVEL
2
3
Turn the Rotary encoder to select the desired setting
value, and then press ENTER.
Press to return to the previous step.
14-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Source Volume Level
Setting the Subwoofer System
The output level of each source is individually adjustable. For example, if
the TUNER level sounds lower than CD, its output can be adjusted
without affecting the other sources.
The Hands free phone talk level, ring tone level and microphone gain
level can also be adjusted by using this setting.
When the subwoofer is on, you can select either SYS 1 or SYS 2 for the
desired subwoofer effect.
Setting item: SUBW SYS
Setting contents:
SUBW SYS 1 / SUBW SYS 2 (Initial setting)
Setting item: VOL LV ADJ
SUBW SYS 1:
Subwoofer level changes according to the main volume setting.
Further setting items: TUNER / DISC / USB / iPod / BT AUDIO /
AUX / PHONE TALK / RING TONE / MIC GAIN
SUBW SYS 2:
Subwoofer level change is different from the main volume setting.
For example, even at low volume settings, the subwoofer is still
audible.
Setting contents:
-5 dB ~ +5 dB
External Device
Adjusting the High Pass Filter
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
Connecting to an External Amplifier (POWER IC)
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
Setting item: HPF
Setting contents:
HPF OFF (Initial setting) / HPF 60 (Hz) / HPF 80 (Hz) /
Setting item: POWER IC
HPF 120 (Hz) / HPF 160 (Hz)
Setting contents:
All frequencies above the selected cutoff are output.
OFF / ON (Initial setting)
OFF:
Turning Subwoofer ON/OFF
Use this mode when the line output of this unit is used to drive an
external amplifier. In this setting, the head unit’s internal amplifier
is turned OFF and cannot drive speakers.
When the subwoofer is on, you can adjust the subwoofer output level
ON:
The speakers are driven by the built-in amplifier.
OFF:
Setting item: SUBWOOFER
Front
left
Setting contents:
SUBW OFF (Initial setting) / SUBW ON
Amplifier
Front
right
SUBW OFF:
No subwoofer signal is output from the Subwoofer RCA
ON:
SUBW ON:
Speakers
The subwoofer signal is output from the Subwoofer RCA
SPEAKER
RIGHT FRONT
Front
right
Adjusting the Low Pass Filter
The Low Pass Filter on this unit can be adjusted to suit your personal
taste.
SPEAKER
RIGHT REAR
Rear
right
Setting item: SUBW LPF
Setting contents:
LPF OFF (Initial setting) / LPF 60 (Hz) / LPF 80 (Hz) /
LPF 120 (Hz) / LPF 160 (Hz)
SPEAKER
LEFT REAR
Rear
left
All frequencies lower than the selected cutoff are output.
Setting the Subwoofer Phase
SPEAKER
LEFT FRONT
Front
left
The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or
SUBWOOFER REVERSE (180°). To adjust the level, turn the
Rotary encoder.
Note
Setting item: SUBW PHASE
•
No sound is produced by the system when the power output is set to
OFF.
Setting contents:
NORMAL (Initial setting) / REVERSE
15-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicator/
Mode
iPod/iPhone/BT
AUDIO Mode
CD Mode
MP3 Mode
Other Functions
*1
*1
Artist Name
Artist Name
—
being displayed being displayed
Text (Disc
*1
*1
Album Name
Album Name
SOURCE/
*3
Name )being
being displayed being displayed
Rotary encoder
displayed
ENTER/OPTION
*1
Text ( Track
*3
Song Name
/
*1
Song Name
being displayed
Name )being File Name
displayed
being displayed
*1 Tag information:
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is
displayed.
*2 The root folder is displayed as “ROOT”.
*3 If there is no Text (Disc Name or Track Name), “DISC TEXT”/
“TRACK TEXT” is displayed.
VIEW
BAND
About “Text”
Displaying the Text
Text compatible CDs contain text information such as the disc name and
track name. Such text information is referred to as “text”.
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc., while playing
MP3 files.
Notes
•
•
•
Some characters may not be displayed correctly with this device,
depending on the character type.
“NO SUPPORT” is displayed if text information is not supported by the
unit.
The text or tag information may not be correctly displayed, depending
on the contents.
Press VIEW k.
The display will change every time the button is pressed.
Note
•
When the TEXT SCR is set to SCR MANU, press and hold VIEW k
for at least 2 seconds, the current text will be scrolled one time (except
Radio mode).
Using the Front AUX Input Terminal
The display in Radio mode:
FREQUENCY CLOCK FREQUENCY
Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
The display in CD mode:
TRACK NO./ELAPSED TIME TEXT (DISC NAME)*1
TEXT (TRACK NAME)*1 TRACK NO./CLOCK
TRACK NO./ELAPSED TIME
Press SOURCE, and select the AUXILIARY mode to
listen to the portable device.
The display in MP3 mode:
FILE NO./ELAPSED TIME FOLDER NO./FILE NO.
Portable player, etc.
Main unit
FOLDER NAME FILE NAME ARTIST NAME*2
ALBUM NAME*2 SONG NAME*2 FILE NO./CLOCK
FILE NO./ELAPSED TIME
The display in iPod mode:
TRACK NO./ELAPSED TIME ARTIST NAME ALBUM NAME
SONG TITLE TRACK NO./CLOCK TRACK NO./ELAPSED TIME
The display in BLUETOOTH Audio mode:
BT A/ELAPSED TIME*3 ARTIST NAME ALBUM NAME
SONG NAME BT A/CLOCK BT A/ELAPSED TIME
*1 Displayed during playback of a disc with CD text.
*2 ID3 tag
or
If an MP3 file contains ID3 tag information, the ID3 tag
information is displayed (e.g. song name, artist name, and
album name). All other tag data is ignored.
*3 Depending on the connected mobile phone, the elapsed time
may not be displayed.
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs).
Notes
About the indication display
•
This function is available only when AUX SETUP is set to ON. For
When displaying Text, the following indicators are lit according to the
mode.
•
If a Flash Memory is directly connected to the USB terminal, the size or
shape may interfere with driving operations, therefore, avoid connecting
an AUX input terminal and a Flash Memory at the same time.
Indicator/
Mode
iPod/iPhone/BT
AUDIO Mode
CD Mode
MP3 Mode
*2
Folder Name
—
—
being displayed
16-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
*10 While calling, and the Voice Mute is activated, the microphone
input will mute instantly and “VOICE MUTE” will blink. This
*11 If there is a waiting call, select this item to display the caller’s
Name and waiting number (1 or 2). Press VIEW k and the
display will switch.
Option Menu Setting
You can quickly adjust the setting items relevant to the current SOURCE
by using Option Menu.
1
Press and hold ENTER/OPTION for at least 2 seconds
to activate the Option menu of the current source.
*13 Select this item to hang up the call.
Note
•
The option menu varies depending on the source.
2
3
Turn the Rotary encoder to select the desired setting
item, and then press ENTER.
Turn the Rotary encoder to change the setting, and then
press ENTER.
After the setting, the display will return to the current source
automatically.
Setting item:
TUNER mode:
VOL LV ADJ*1
DISC mode:
CD SET*2 VOL LV ADJ*1
USB mode:
VOL LV ADJ*1
iPod mode:
iPod CONT*3 iPod SET*4 VOL LV ADJ*1
AUX mode:
AUX SET*5 VOL LV ADJ*1
BT AUDIO mode:
BT SET*6 VOL LV ADJ*1
Phone mode (Non-calling mode):
PHONE SET*7 VOL LV ADJ*8
Phone mode (Calling mode):
SPK SWITCH*9 VOICE MUTE*10 CALL WAIT*11
CALL SOUND*12 END CALL*13 VOL LV ADJ*8
*1 You can individually emphasize or weaken the volume level of
the current source to create your own tonal preference. The
setting values in Option mode and in SETUP mode are linkage.
*4 The setting items are the same as iPod setting in SETUP mode.
For details, refer to “iPod/iPhone Setting” on page 19.
*6 FW VERSION can be selected in this mode. You can see the
current firmware version about BLUETOOTH by using this
setting.
*7 CALL SOUND, SENDER ID, PB UPDATE, PB ORDER, AUTO
ANS, SEV NAME, SPEAKER SL and FW VERSION can be
selected in this mode. For details about these settings, refer to
*8 The Hands free phone talk level, ring tone level and microphone
gain level can be adjusted by using this setting. The setting
values in Option mode and in SETUP mode are linkage. Refer to
*9 While calling, the call sound can be switched between the unit
and mobile phone by using this setting.
17-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
General Setting
SETUP
GENERAL is selected on the setup main menu in step 2.
Setting the AUX SETUP Mode
SOURCE/
Rotary encoder
ENTER
You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
Setting item: AUX SETUP
Setting contents:
AUX OFF / AUX ON (Initial setting)
AUX OFF:
When set to OFF, AUX source cannot be selected.
AUX ON*:
Set to ON when a portable device is connected. If SOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
AUDIO/SETUP
*
You can change the AUX NAME display when AUX SETUP is
set to ON. Press ENTER when AUX SETUP is set to ON,
and select AUX NAME by turning the Rotary encoder, then
press ENTER. After that, turn the Rotary encoder to
select the desired AUX NAME.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
Note
When the PORTABLE is set, PMD is displayed on the unit.
•
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
Playing MP3 Data (PLAY MODE)
This unit can play back CDs containing both CD and MP3 data (created
in Enhanced CD (CD Extra) format). However, in some situations,
playback of an enhanced CD may be difficult. In this case, you can select
playback of a single session only, containing the CD data. When a disc
contains both CD and MP3 data, playback starts from the CD data
portion of the disc.
1
2
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
Turn the Rotary encoder to select the desired item, and
then press ENTER.
(e.g. Select GENERAL )
Setting item: PLAY MODE
AUDIO*1 GENERAL DISPLAY iPod BLUETOOTH*2
Setting contents:
CD-DA / CDDA/MP3 (Initial setting)
GENERAL:
CLOCK ADJ*3 AUX SETUP AUX NAME*4 PLAY MODE
CD-DA:
DEMO
DISPLAY:
DIMMER SCROLLTYPE
Only the CD data in Session 1 can be played back.
CDDA/MP3:
CD data, MP3 files in mixed mode, and multi-session discs can be
played back.
iPod:
iPod LIST
Note
•
Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
*4 Displayed only when AUX SETUP is set to ON.
Demonstration
3
4
5
Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select AUX SETUP)
This unit has a demonstration feature for the display.
Setting item: DEMO
Setting contents:
DEMO OFF (Initial setting) / DEMO ON
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select AUX ON or AUX OFF.)
Note
•
To quit Demo mode, set to DEMO OFF.
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•
Press to return to the previous mode.
•
Pressing and holding for at least 2 seconds will return to normal
mode.
•
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
18-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Setting
BLUETOOTH Operation
DISPLAY is selected on the setup main menu in step 2.
Dimmer Control
SOURCE/
Rotary encoder
Set the Dimmer control to Auto to decrease the illumination brightness
of the unit with the head lights of the vehicle ON. This mode is useful if
you feel the unit’s backlighting is too bright at night.
ENTER
Setting item: DIMMER
Setting contents:
DIM MANUAL / DIM AUTO (Initial setting)
Scroll Setting (SCROLLTYPE)
VIEW
AUDIO/SETUP
1 2
Preset buttons
(1 through 6)
BAND
This CD player can scroll the disc and track names recorded on
CD-TEXT discs, as well as the text information of MP3 files, folder
names and tags.
ABC SKIP
Setting item: SCROLLTYPE
Setup Before Using
Setting contents:
SCR MANUAL / SCR AUTO (Initial setting)
SCR MANUAL:
About BLUETOOTH
The display is scrolled when a disc is loaded or when a track is
changed, etc.
BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 meters. For details, refer to the BLUETOOTH
Home page (http://www.bluetooth.com).
SCR AUTO:
The current text information of CD, folder, tag, etc. is scrolled
automatically.
Note
•
The unit scrolls CD text names, folder names, file names or tag display.
iPod/iPhone Setting
Notes
“iPod” is selected on the setup main menu in step 2.
•
Depending on the BLUETOOTH version, a BLUETOOTH compatible
device may not be able to communicate with this unit.
Proper function of this unit with all BLUETOOTH compatible devices
is not guaranteed. For handling of the BT compatible device, consult
your ALPINE dealer or ALPINE website.
•
iPod/iPhone Search Mode Setting
The unit allows you to search for the iPod/iPhone using eight different
search modes.
•
•
•
Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
When you place a call, or perform setup operations, be sure to stop your
car in a safe place.
Setting item: iPod LIST
Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the connected
device(s).
Further setting items: PLAYLISTS / ARTISTS /ALBUMS /
AUDIOBOOKS / PODCASTS / GENRES / COMPOSERS / SONGS
Setting contents:
OFF / ON
•
When you search this unit using the BLUETOOTH compatible phone,
the unit name is displayed as “Alpine CD Receiver” model name.
Notes
Before Using BLUETOOTH Function
•
When the search mode is in Playlists/Artists/Albums/Podcasts/Genres/
Songs, the initial setting is On, and when the search mode is in
Audiobooks/Composers, the initial setting is Off.
For search mode details, refer to “Searching for a desired Song” on
Before using the BLUETOOTH function, the following settings need to
be made.
•
Set “HPF” or “AUDIO” to ON when you want to use
Hands-Free phone or BT Audio function. Refer to “Setting
Note
•
Before using BLUETOOTH function, it must be paired with this unit.
How to connect to a BLUETOOTH
compatible device (Pairing)
For details on the control from a BLUETOOTH compatible device, refer
to the Owner’s Manual of the BLUETOOTH compatible device.
19-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BLUETOOTH:
Pairing a BLUETOOTH compatible device with
SSP (Secure Simple Pairing)
BT IN*1 PAIRED DEV VISIBLE M*1 SEARCH DEV*1
CALL SOUND*2 SENDER ID*2 PB UPDATE*2 PB ORDER*2
AUTO ANS*2 SEV NAME*2 SPEAKER SL*2
FW VERSION FW UPDATE*1
1
2
Using your BLUETOOTH compatible device, select the
“Alpine CD Receiver” for pairing.
*1 The items are not displayed during a phone call.
Turn the Rotary encoder to change the head unit display
from “PAIR NO” to “PAIR YES”.
If “PAIR NO” is selected, the connection will be canceled.
4
5
Turn the Rotary encoder to change the settings.
3
If the pairing was successful, “CONNECTED” is displayed
for a few seconds. The head unit then returns to its
previous state.
Press and hold AUDIOSETUP for at least 2 seconds.
The SETUP mode is canceled.
Notes
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
•
Press to return to the previous mode.
•
Pressing and holding for at least 2 seconds will return to normal
mode.
•
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
1
2
Using your BLUETOOTH compatible device, select the
Alpine CD Receiver for pairing.
Setting the BLUETOOTH Connection
(BT IN)
Input the PIN code (“0000”) in a BLUETOOTH compatible
device.
Note
With BLUETOOTH technology, you can place a hands-free call by a
BLUETOOTH-equipped mobile phone.
•
The PIN code is fixed as “0000”.
Audio information of a BLUETOOTH compatible mobile phone, a
portable audio player, etc., is controllable/playable wirelessly from this
unit.
3
If the pairing was successful, “CONNECTED” is displayed
for a few seconds. The head unit then returns to its
previous state.
Setting item: BT IN
Notes
•
If the connection is unsuccessful, “FAILED” is displayed.
Further setting items: HFP / AUDIO
•
After a successful pairing, the two devices should re-pair automatically
whenever the vehicle’s ignition is turned ON.
Setting contents:
OFF / ON (Initial setting)
•
•
Set “VISIBLE M” to VISI M ON to enable this unit to be recognized by
a BLUETOOTH compatible device, refer to “Setting the Visible Mode”
You can also manually pair the BLUETOOTH devices from this unit.
Hands-Free Phone setting (HFP)
ON:
Select when you want to pair your BLUETOOTH compatible phone
with this unit.
OFF:
Hands-Free Phone function is not used.
BLUETOOTH SETUP
Note
•
When HFP is set to OFF, the indicators related to Hands-free phone
(c battery quantity, i signal strength and h message) will not
be displayed.
The following steps 1 to 5 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
Note
•
Set “HFP” or “AUDIO” to ON, and then perform BLUETOOTH
SETUP operation. Refer to “Setting the BLUETOOTH Connection
BLUETOOTH Audio setting (AUDIO)
ON:
Select when you want to use BLUETOOTH Audio function.
OFF:
1
2
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
BLUETOOTH Audio function is not used.
Setting the BLUETOOTH Device
Turn the Rotary encoder to select “BLUETOOTH”, and then
press ENTER.
The BLUETOOTH setup mode is activated.
Select one of 3 connected BLUETOOTH compatible devices that you
previously registered.
Note
Setting item: PAIRED DEV
•
The BLUETOOTH setup mode can also be activated by pressing and
holding w for at least 2 seconds.
1
Turn the Rotary encoder to select a BLUETOOTH
compatible device you want to use (you want to change
connection) and then press ENTER.
3
Turn the Rotary encoder to select the desired items and
then press ENTER.
20-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Turn the Rotary encoder to select “CONNECT” to connect
the selected device.
Setting the BLUETOOTH sound quality
You can flexibly customize the sound of call to fit your own preferences.
Setting item: CALL SOUND
The connected device is marked with “l”. Select “DISCONNECT”
to disconnect this device. Select “CLEAR” when you want to clear
the device from the device list.
Notes
Further setting items: VOL LV ADJ / AUTO SET
•
If the connection is successfully changed, “CONNECTED” is displayed
for 2 seconds and the indicator lights up, then the display returns to
the SETUP screen.
Adjusting the volume (VOL LV ADJ)
•
If a mobile phone is connected to this unit successfully, the c
indicator lights up to show the battery quantity of the connected mobile
phone. The j indicator lights up when the battery quantity is in
middle level, and it blinks in low level.
You can emphasize or weaken the volume level of the Phone call, the
ring tone and the microphone input to fit your own preferences.
Setting contents:
•
Indicator i (Signal Strength):
PHONE TALK:
-5 dB~ +5 dB
RING TONE:
-5 dB~ +5 dB
The indicator will display the current signal strength of mobile phone.
The indicator blinks when the signal of the connected mobile phone is
weak.
•
•
Depending on the connected mobile phone, the c (battery
quantity), i (signal strength) and h (message) indicators may not be
displayed.
If all the 3 positions have been registered, you cannot register the 4th
device. To register another device, you need to delete one of the devices
from position 1 to 3 first.
MIC GAIN:
-5 dB~ +5 dB
Note
•
These setting items are the same as PHONE TALK, RING TONE and
MIC GAIN settings in AUDIO step mode, refer to “Setting the Source
Setting the Visible Mode
Sound Auto setting (AUTO SET)
You can set whether this unit can be recognized or not from a
BLUETOOTH compatible device. Normally set this to VISI M ON.
This unit provides 5 methods to improve the sound quality of calling.
You can choose the type according to your own preference.
Setting contents:
TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5
Setting item: VISIBLE M
Setting contents:
VISI M OFF / VISI M ON (Initial setting)
TYPE1:
Standard Mode (recommended)
VISI M OFF:
TYPE2:
Disable recognition of this unit from the BLUETOOTH compatible
device.
Enhance the noise reduction
TYPE3:
Enhance the echo-cancel
VISI M ON:
Enable recognition of this unit from the BLUETOOTH compatible
device.
TYPE4:
Enhance both noise reduction and echo-cancel
TYPE5:
Pairing a BLUETOOTH Device from the
unit
Weaken both noise reduction and echo-cancel
Notes
•
The functions below are designed to improve the sound quality of the
caller to driver.
The BLUETOOTH device is used when a connectable BLUETOOTH
compatible device is searched and connected to this unit, or when a new
BLUETOOTH compatible device is registered.
Noise reduction: This function can reduce the road noise, but excessive
enhancement may affect the sound quality of calling.
Echo-cancel: This function can reduce the echo noise, but excessive
enhancement may affect the sound quality of calling.
Improvement effect differs depending on the actual calling
environment, so please choose a suitable type accordingly.
Setting item: SEARCH DEV
•
1
When SEARCH DEV is selected, and “SEARCHING” is
displayed, the search gets started.
Setting the caller information display/
text message indicator ON/OFF
Note
•
The “SEARCHING” operation can be stopped by pressing .
You can choose whether to use these functions according to the
following setting.
2
3
Turn the Rotary encoder to select the name of the device
to be connected from the Device Search list and then
press ENTER.
Setting item: SENDER ID
If this unit is successfully connected to a BLUETOOTH
compatible device, “CONNECTED” is displayed, and then
the unit returns to normal mode.
Further setting items: MSG ALERT / CALLER ID
Setting contents:
OFF / ON (Initial setting)
Depending on the mobile phone, it may be necessary to input a
passcode. In this case, “CODE 0000” is displayed. Input the
passcode “0000” in the BLUETOOTH compatible device to make
the pairing. After the pairing is completed, the unit will
automatically connect to the BLUETOOTH compatible device. If
you input the wrong passcode or the communication fails,
“FAILED” is displayed.
21-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Setting text message indicator ON/OFF (MSG
ALERT)
•
If the received call setting on the mobile phone is on, the call will be
answered automatically even though this setting is set to OFF.
When it is set to ON, the h indicator blinks for 30 seconds while
receiving a text message. The h indicator remains on if there is an
unread text message on the connected mobile phone.
Displaying the phone service provider
name
Notes
The service provider name of the connected BLUETOOTH compatible
device will be displayed. If a BLUETOOTH compatible device is not
connected, “ID UNSENT” will be displayed.
•
•
•
Depending on the mobile phone, this function may not be performed.
The text of the message will not be displayed on this unit.
When this unit prompts you of a received text message, it is
recommended to read the message after stopping your car in a safe
place, rather than read it immediately through your phone.
Setting item: SEV NAME
Note
Setting the caller information display ON/OFF
(CALLER ID)
•
Depending on the character type some phone service provider name
cannot be displayed. “ID UNSENT” will be displayed.
If you want to keep the ID information of the caller from others, set this
item to OFF. While you are dialing a number, telephone name will be
displayed as “ID UNSENT”. While a call is dialing in or during a call,
“NO NAME” will be displayed.
Selecting the output speaker
You can select the connected speaker in car to output the sound signal of
telephone.
Setting item: SPEAKER SL
Phone Book Auto Update ON/OFF
You can set whether to update the phone book automatically.
Setting item: PB UPDATE
Setting contents:
ALL (Initial setting) / FRONT-L / FRONT-R / FRONT-LR
ALL:
The sound be output from all of speakers in car.
Setting contents:
OFF / ON (Initial setting)
FRONT-L:
The sound only be output from the front left speaker.
OFF:
FRONT-R:
The phone book will not update.
The sound only be output from the front right speaker.
ON:
FRONT-LR:
When the mobile phone reconnects with this unit, the phone
book will update.
The sound be output from the front left and front right speaker.
Displaying the firmware version
The current firmware version will be displayed.
Setting item: FW VERSION
Changing the Phone book List Order
The phone book is listed alphabetically according to the initial letter of
name.
You can choose to arrange the phone book list order according to the
initial letters of the FIRST NAME or LAST NAME.
Updating the firmware
Setting item: PB ORDER
Future BLUETOOTH firmware updates may become available for
phone interoperability.
For information to update your BLUETOOTH firmware, please visit
Alpine America home page (http://www.alpine-usa.com).
Setting contents:
FIRST NAME (Initial setting) / LAST NAME
Note
•
“WAITING” will be displayed while the Phone book order is switching.
You can quit the “WAITING” screen to perform other operations by
pressing when the ordering is still in progress, at this time, the
phone book is not accessible. In addition, the ordering may affect the
playback of BT AUDIO.
Setting item: FW UPDATE
Setting contents:
UPDATE NO (Initial setting) / UPDATE YES
Setting the Received Calls automatically
(Auto Answer)
Hands-Free Phone Control
When a call is received, you can set whether to receive it automatically
or not.
About the Hands-Free Phone
Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with this unit.
Setting item: AUTO ANS
Setting contents:
AT ANS OFF (Initial setting) / AT ANS ON
Notes
•
Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
AT ANS OFF:
•
•
Close the windows while calling to reduce background noise.
If both calling parties are using hands-free devices, or the call is made in
a noisy location, difficulty hearing the other person’s voice is normal.
Depending on telephone line conditions or certain mobile devices used,
voices may sound unnatural.
When a call is received, it is not answered automatically. Press w
to receive the call.
AT ANS ON:
•
When a call is received, it is answered automatically after about 5
seconds.
22-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
Note
It may take some time for the list to be displayed, and also directly after
connection, the list may not be brought up to date.
•
Certain mobile phone features are dependent on the capabilities and
settings of your service provider’s network. Additionally, certain features
may not be activated by your service provider, and/or the provider’s
network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality.
4
5
Turn the Rotary encoder to select a name or a telephone
number from the list.
Note
•
You can use Phone book alphabet search function to search a name or
number from Phone Book. For details, refer to “Phone book alphabet
All features, functionality, and other product specifications, as well as
the information contained in the Owner’s Manual are based upon the
latest available information and are believed to be accurate at the time
of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
Press ENTER.
The selected telephone will be called.
If one name has several numbers registered in the telephone
*
book, press ENTER after selecting the name , then turn the
Answering a Call
Rotary encoder to choose the desired number and press
ENTER, the telephone will be called. Press and hold
ENTER for at least 2 seconds after selecting the name, the
default number of the name will be called. Depending on the
connected mobile phone, this function may not be performed.
Incoming calls are announced by the received call ring tone and a
displayed message (PHONE).
Press f.
*
If the name cannot be recognized, default number will be
displayed.
The call starts.
Notes
•
Notes
When “AUTO ANS” is set to AT ANS ON, you can receive a call
automatically. Refer to “Setting the Received Calls automatically (Auto
While calling, the source sound on the unit is muted. After calling,
playback will resume.
•
•
Press to return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
The names registered in the telephone book are displayed. If the name is
not registered, a number is displayed. If both name and number cannot
be displayed, “ID UNSENT” will be displayed.
If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.
•
•
•
Hanging up the Telephone
Press f.
The call finishes.
Voice Dial Operation
Note
You can make a call using voice commands.
•
You can also hang up the call by pressing and holding for at least 2
seconds.
Setting item: VOICE DIAL
When the speak mode is activated and “SPEAK” is
displayed, say the telephone number*, name* you want to
call into the microphone.
Calling
Call History is recorded for the last dialed/received/missed calls (80
records for each). There are various ways of making calls based on the
“Calling”. The following steps 1 to 5 are common to the various ways of
making these calls. For details, refer to each individual category for
making calls.
*
This message depends on the voice tag prestored in the mobile
phone.
Notes
•
You can perform this operation only when a voice dial compatible
mobile phone is connected. If the mobile phone is not compatible with
the voice dial, “NO SUPPORT” is displayed for 2 seconds.
The Voice Dial function performance depends on the recognition range
of the mobile phone and mounting location of the microphone. Please
pay attention when the microphone is mounted.
Voice dial operation depends on the function of the mobile phone. For
details, refer to the Owner’s Manual of the mobile phone.
If a called person that you say is not found, “NO CALL” is displayed for
2 seconds.
1
2
Press f.
The outgoing method list is displayed.
•
Turn the Rotary encoder to select the outgoing mode.
Setting contents:
VOICE DIAL / DIALED / RECEIVED / MISSED /
PHONE BOOK
•
•
VOICE DIAL:
Voice dial operation
DIALED:
Dialed history
RECEIVED:
Received history
MISSED:
Missed incoming history
PHONE BOOK:
Mobile phone book
3
Press ENTER.
The outgoing mode is activated, and each mode list is displayed.
23-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Turn the Rotary encoder to select the third letter (e.g. C),
and then press ENTER.
The names stored in phone book which begin with “MIC” are
searched.
Redialing a Number In Outgoing History
Previously dialed telephone numbers are stored in dialed calls history.
You can redial a number by searching from dialed calls history.
Setting item: DIALED
Turn the Rotary encoder to select the desired name (e.g.
Michael James), and then press ENTER to make the
call.
Dialing a Number In Incoming History
Telephone numbers from received calls are stored in the Received List.
You can redial these numbers by searching here.
Notes
•
If the selected name has several numbers registered in phone book, you
need to turn the Rotary encoder to select the desired number, and
then press ENTER.
Setting item: RECEIVED
•
•
Press in step 3 or 4 to delete the current entry and return to the
previous step.
Dialing a Number In Incoming Missed Call
History
You can search for a name by its first letter, first two letters or first three
letters. Press ENTER after entering the desired number of letters. A
list displays the names beginning with the entered letter(s).
Telephone numbers for received calls that are missed, are stored in the
Missed List. You can redial these numbers by searching here.
Call waiting function
Setting item: MISSED
If a second call is received during a current call, you can have the first
caller wait momentarily while you take the second call. When you are
finished with one call, you can switch to the other one.
Dialing a Number In The Phone Book
Up to 1,000 names (at most 5 telephone numbers for each name) are
downloadable from a mobile phone. Dial a call by selecting a person
from the phone book list.
If a second call is received during the current call (call1),
the information of second caller (call2) is displayed
instead of the current caller’s name. Press 2, the call
waiting mode is activated.
Setting item: PHONE BOOK
Notes
In this case, call1 is on hold, while you take call2.
•
The order of the list display depends on the setting of “PB ORDER”
If the call history or phone book of the mobile phone is added or deleted
while it is connected to the unit, the list displayed on the unit may not
be brought up to date. If it is not updated, you cannot correctly place a
call.
Notes
•
In the call waiting mode, press 1 or 2 to switch between the calling
•
person and the person on hold.
•
In the call waiting mode, press and hold 1 or 2 for at least 2
seconds to hang up call1 or call2, and the other call will be answered
automatically.
In the call waiting mode, you can press VIEW k to change the display
between waiting number (1or 2) and caller name.
•
You can display the information of a number stored in phone book by
pressing VIEW k. Each press changes the display as Name
•
*
Telephone NO. Telephone label Name
If the information can not be obtained, “NO NAME”,“NO NUMBER”
or “NO LABEL” will be displayed.
Preset a number in the Phone Book
(Shortcut dial)
*
The telephone label of a number depends on the number information
stored in Phone book of the mobile phone, which includes 5
types-GENERAL, MOBILE, HOME, OFFICE and OTHER.
Assign numbers that you dial frequently to presets for quick recall. You
can assign up to six frequently called phone numbers to number presets.
Phone book alphabet search function
Select a number you want to preset from the Phone Book.
Press and hold any one of the preset buttons (1 through
6) as the one that you wish to store the number for at least
2 seconds.
You can select the first three letters to search for a desired name in
phone book list by using the Phone book alphabet search function.
For example:
Searching a name “Michael James”
The phone number you selected is stored in presets.
The following example explains how the search is performed.
Depending on the setting in PB ORDER (refer to “Changing the Phone
book List Order” on page 22), the phone book is listed in first name or
last name order. Please search for the first name or last name according
to the setting.
Notes
•
If the name has several numbers registered in the phone book, press
ENTER after selecting the name. Turn the Rotary encoder to
choose the desired number. Press and hold any one of the preset
buttons (1 through 6) for at least 2 seconds. The selected number is
stored as a preset number.
1
2
3
Press ABC SKIP while in the phone book list, the phone
book alphabet search mode is activated.
•
•
A total of 18 phone numbers can be stored in the preset memory (6
numbers for each mobile phone in the paired device list.) If a mobile
phone is deleted from the paired device list, the stored preset numbers of
this mobile phone are deleted, even when it is paired again.
If you store a phone number in a preset with a previously stored
number, the current number will be cleared and replaced by the new
one.
The letter selection list is displayed.
Turn the Rotary encoder to select the first letter (e.g. M),
and then press .
The letter selection list is displayed.
Turn the Rotary encoder to select the second letter (e.g. I),
and then press .
The letter selection list is displayed.
24-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing the preset number
BLUETOOTH Audio Operation
1
2
Press any one of the preset buttons (1 through 6) that has
had a number stored in the phone mode.
Audio information of a BLUETOOTH compatible mobile phone, a
*
portable player, etc., is controllable/playable wirelessly from this unit.
The information (name/number) stored in the preset station is
displayed.
*
To play back audio, a mobile phone or a portable player conforming to
A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/
Video Remote Control Profile) is required.
Press ENTER or f.
The stored preset number is dialed directly.
Not all functions work with all devices.
Notes
•
Set “AUDIO” to ON when you want to use BLUETOOTH Audio
Adjusting the volume when receiving a
Call
•
•
During a call, sound on the BLUETOOTH audio source is muted.
If you operate the Hands-free phone (e.g. searching in the phonebook)
while using the BLUETOOTH Audio function, BLUETOOTH Audio
playback may be affected.
While calling, you can adjust the volume.
Turn the Rotary encoder to adjust the volume.
Note
Recalling the BLUETOOTH Audio Mode
Press SOURCE/ to select the BT AUDIO mode.
Selecting the desired Song
•
You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result in
feedback. Feedback is directly related to the volume. Turning down the
volume as low as acceptable, will reduce it. Positioning the microphone
in a direction away from the main car speakers (e.g. clipped on sun
visor) may also reduce feedback at high volume.
Press .
Muting the microphone input quickly
(Voice Mute)
Return the beginning of the song being played back.
Press .
While calling, activating the Voice Mute function will instantly mute the
microphone input. Your voice will not be heard by the caller.
Forward the next song.
Pausing
While calling, press to mute the microphone input.
Press again will bring the microphone input back to its
previous volume level.
Press .
A playback stops. Touching again will resume a playback.
Note
•
The operation can also be performed in the option menu of phone mode
Call Switching Operation
While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.
While calling, press BAND to switch the call sound
between the unit and mobile phone.
Notes
•
•
Depending on the mobile phone, this operation may not be performed.
The operation can also be performed in the option menu of phone mode
25-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove Flash Memory
Flash Memory (optional)
1
2
Carefully, pull out the Flash Memory Device from the USB
cable or the USB Port.
SOURCE/
Close the cover of the USB Port.
Notes
•
Change to a source other than the Flash Memory mode, and then
remove the Flash Memory Device. If Flash Memory is removed in the
Flash Memory mode, data may be damaged.
•
•
When removing Flash Memory, pull it out straight.
If sound is not output or Flash Memory is not recognized even when
connected, remove the Flash Memory Device once, and then connect it
again.
Route the USB cable away from other cables, etc.
After removing the Flash Memory, close the cover of the USB Port to
prevent dust or foreign objects from entering and causing a
malfunction.
•
•
Playing MP3 Files from Flash Memory
(optional)
About MP3 File of Flash Memory
If you connect a Flash Memory Device containing MP3, MP3 files can
be played back.
Playing back MP3
MP3 files are prepared, and then stored to a Flash Memory Device. This
unit can recognize at most 100 folders and 100 files per folder stored in
Flash Memory. Playback may not be performed if a Flash Memory
Device exceeds the limitations described above.
1
2
Press SOURCE to switch to the USB AUDIO mode.
To pause playback, press .
Do not make a file’s playback time more than 1 hour.
Pressing again will resume the playback.
Media supported
Notes
This device can play back Flash Memory.
•
The root folder is displayed as “ROOT” in the Folder Name Search
Corresponding File Systems
This device supports FAT 12/16/32 for Flash Memory device.
mode.
•
This unit plays back files in Flash Memory with the same controls and
modes as playback of CDs containing MP3. For details, refer to “CD/
Before disconnecting Flash Memory, be sure to change to another source
or set to pause.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
•
•
Flash Memory Connection (optional)
Connect Flash Memory
1
2
Open the cover of the USB Port.
Connect the Flash Memory directly to the USB Port, or via
the USB cable.
This unit
USB Connection Terminal
Flash Memory
(sold separately)
or
Flash Memory
(sold separately)
Cable (sold
separately)
26-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod nano (4th generation): Ver.1.0.4
iPod classic (120 GB): Ver.2.0.1
iPod touch (1st generation): Ver.3.1.3
iPod nano (3rd generation): Ver.1.1.3
iPod classic (80 GB, 160 GB): Ver.1.1.2
iPod nano (2nd generation): Ver.1.1.3
iPod with video: Ver.1.3
iPod/iPhone (optional)
SOURCE/
Rotary encoder
ENTER/OPTION
iPod nano (1st generation): Ver.1.3.1
Confirmed devices regarding Made for iPhone. Correct function of
earlier versions cannot be guaranteed.
iPhone 4: Ver.4.3
•
iPhone 3GS: Ver.4.3
iPhone 3G: Ver.4.2.1
iPhone: Ver.3.1.3
•
•
For clarity in identifying your model of iPod, please see Apple’s own
document “Identifying iPod models” at
This unit does not support video playback from iPod/iPhone, even
using a video-compatible cable.
1 2
4
5
ABC SKIP
Preset buttons
(1 through 6)
Connecting an iPod/iPhone
Setting the iPod Control
An iPod/iPhone can be connected to this unit by using the Interface
cable for iPod (included with iPod). When an iPod/iPhone is connected
to this unit, you can choose to control the iPod/iPhone using its own
controls or by the head unit controls. For details, refer to “Setting the
When an iPod/iPhone is connected, operate it from its own controls or
from the head unit.
1
Press and hold ENTEROPTION for at least 2 seconds
in the iPod mode.
These instructions refer to controlling the iPod/iPhone from this Head
Unit (HU) only. Make sure iPod Control is set to HU (HEAD UNIT).
Refer to “Setting the iPod Control” on page 27. Refer to the iPod/iPhone
manual for operations using the iPod/iPhone.
The Option menu for iPod mode is activated.
2
Turn the Rotary encoder to select iPod CONT, and then
press ENTER.
The iPod control mode will switch between iPod MODE and HU
MODE.
This unit
USB Connection Terminal
HU (HEAD UNIT) MODE:
Operate the iPod/iPhone via this unit.
iPod MODE:
Operate the iPod/iPhone using its own controls. When iPod is
selected, some functions will not be operable via the head unit.
Notes
iPod/iPhone
(sold separately)
•
Once the control mode is changed, this will set pause status, press
to continue.
•
Depending upon the iPod used, iPod control may not be selectable. Or,
if iPod is selected, operation must still be from the head unit.
Included with iPod/iPhone
Playback
Notes
1
2
Press SOURCE to switch to the iPod mode.
•
An iPhone connected to this unit operates as an iPod. The iPhone can
be used as a hands-free device using the integrated Bluetooth module.
Internet and telephone functions of iPod touch or iPhone, etc., can also
be used when connecting to the unit. However, using these functions
will stop or pause the playing songs, at this time do not operate the unit
to avoid a malfunction.
Press or to select the desired song.
•
Pressing and holding or will fast backward/fast
forward the current track.
3
To pause playback, press .
•
Do not leave an iPod/iPhone in a car, as its mechanism is sensitive to
high temperature and humidity conditions, and damage may result.
Pressing again will resume playback.
About iPod/iPhone models usable with this unit
Notes
•
Confirmed devices regarding Made for iPod. Correct function of
earlier versions cannot be guaranteed.
iPod touch (4th generation): Ver.4.3
•
•
•
•
A song playing on the iPod/iPhone while it is connected to this unit will
continue to play from where it was paused after disconnection.
If you listen to an episode from a selected Podcast or Audiobook, the
episode can be changed by pressing 1 or 2.
iPod nano (6th generation): Ver.1.0
An episode may have several chapters. The chapter can be changed by
pressing or .
During iPod/iPhone playback, press , and then you can quickly
return to the hierarchy level selected last time in the search mode.
iPod touch (3rd generation): Ver.4.3
iPod nano (5th generation): Ver.1.0.2
iPod classic (160 GB) (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.4.2.1
27-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
“NOAUDIOBOK” will be displayed if there is no Audiobook data in the
iPod/iPhone in AUDIOBOOK search mode.
Searching for a desired Song
If “iPod name” stored in the iPod/iPhone is selected in the desired
Playlist search mode, and ENTER is pressed, you can search for all
songs in the iPod/iPhone. Also, if you press and hold ENTER for at
least 2 seconds, all songs in the iPod/iPhone are played back.
Depending on the iPod/iPhone, podcast search is not supported.
If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
An iPod/iPhone can contain thousands of songs. The unit for this reason
can make various searches using the search function as shown below.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode
to narrow searches based on the table below.
•
•
Hierarchy 1
Hierarchy 2
Hierarchy 3
Hierarchy 4
Playlist
Song
—
Song
—
—
—
*
*
Alphabet search function
Artist
Album
*
Album
Song
—
—
The unit’s alphabet search function can be used to search for an album,
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
PODCAST/GENRE/COMPOSER/AUDIOBOOK search mode, select
the first letter of your desired title (album, song, etc.), the titles
beginning with this letter are listed. By using this function, you can
quickly target any song.
Song
—
—
Podcast
Episode
—
—
*
*
*
Genre
Artist
Album
Song
—
*
*
Composer
Album
Song
—
Audiobook
—
—
1
2
In the search mode, press ABC SKIP.
The letter selection list is displayed.
Note
•
You can select your preferred search mode. Refer to “iPod/iPhone
Turn the Rotary encoder to select a desired letter (e.g. M),
and then press ENTER.
The titles beginning with “M” are listed.
For example:
Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
3
Turn the Rotary encoder to select the desired title.
Notes
1
2
Press ENTER to activate the search selection mode.
The “” indicator lights up.
•
While in Alphabet search mode, pressing will return to the
previous mode.
•
If the PLAYLIST search mode is used to search for a song, the Alphabet
search function is inactive in the song search hierarchy.
Turn the Rotary encoder to select the ARTIST search
mode, and then press ENTER.
SHUFFLE ALL*1 PLAYLIST ARTIST ALBUM SONG
PODCAST GENRE COMPOSER AUDIOBOOK
SHUFFLE ALL
Direct Search Function
The unit’s direct search function can be used to search for an album,
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can
quickly target any song.
Note
•
The display of search mode list varies depending on the setting of iPod
3
4
5
Turn the Rotary encoder to select the desired Artist, and
then press ENTER.
In the search mode, press any one of the preset buttons (1
through 6) to quickly skip over a designated percent of
your song content.
Turn the Rotary encoder to select the desired Album, and
then press ENTER.
Song search example:
If there are 100 songs in your iPod/iPhone, they are divided into 6
groups using percentages (shown below). These groups are
assigned to the preset buttons (1 through 6).
Turn the Rotary encoder to select the desired Song, and
then press ENTER.
Example 1:
Notes
Suppose the song you are searching for is located at around the
middle (50%) of your library: press button 4 to jump to the 50th
song and turn the Rotary encoder to find the desired song.
•
•
•
After pressing and holding ENTER for at least 2 seconds while in
each hierarchy (except SONG and AUDIOBOOK hierarchy), all songs
of the selected hierarchy are played back.
After selecting [ALL] in the search mode with “*” (refer to the table
above), press and hold ENTER for at least 2 seconds to play back all
songs in the iPod/iPhone or selected search mode.
While in the search mode, if you press and hold for 2 seconds, or no
operation is performed for 10 seconds, the search mode is canceled.
In the search mode, pressing will return to the previous mode.
When search is made during M.I.X. play, the M.I.X. play mode will be
canceled.
“NO SONG” will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
“NO PODCAST” will be displayed if there is no podcast data in the
iPod/iPhone in the PODCAST search mode.
Example 2:
Suppose the song you are searching for is located near the end
(83%) of your library: press button 6 to jump to the 83rd song
and turn the Rotary encoder to find the desired song.
All 100 songs (100%)
•
•
0%
17%
33%
50%
67%
83%
Preset
•
•
1
2
3
4
5
6
buttons
1st
song
17th
song
33rd
song
50th
song
67th
song
83rd
song
Songs
28-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Playlist/Artist/Album/Genre/
Composer
Repeat Play
Only Repeat One is available for the iPod/iPhone.
Playlist/Artist/Album/Genre/Composer can be easily changed.
For example, if you listen to a song from a selected album, the album can
be changed.
Repeat One:
A single song is repeatedly played back.
1
Press a 4.
Press 1 or 2 to select the desired Playlist/Artist/Album/
Genre/Composer.
The song is played back repeatedly.
a* (off) a
Notes
*
Repeat One.
•
•
•
If the song search mode was used to select a song, this function is
inactive.
2
To cancel repeat play, select (off) with the above
procedure.
If an album is selected during an artist search, other albums by that
artist are searchable.
This function is inactive during shuffle (s) playback.
Note
During repeat playback, no other songs are selectable by pressing
or .
•
Random Play Shuffle (M.I.X.)
The Shuffle function of the iPod/iPhone is displayed as s on this unit.
Shuffle Albums:
The songs on each album are played back in proper order. Upon
completion of all the songs on the album, the next album is selected
randomly. This continues until all albums have been played.
Shuffle Songs:
Song shuffle randomly plays back songs within a selected category
(playlist, album, etc.). The songs within the category are played just
once until all songs have been played.
1
2
Press 5 s.
The songs are played back in random sequence.
s*1 s*2 (off) s
*1 Shuffle Albums.
*2 Shuffle Songs.
To cancel M.I.X. play, select (off) with the above procedure.
Note
•
If a song is selected in the album search mode before selecting M.I.X.
play, the songs will not play back randomly even when Shuffle Albums
is selected.
Shuffle ALL:
Shuffle ALL plays all songs in the iPod/iPhone randomly. Any one
song does not play back again until all songs have been played back.
1
2
Press ENTER to activate the search selection mode.
Turn the Rotary encoder to select SHUFFLE ALL, and then
press ENTER.
The “g” indicator lights up.
To cancel Shuffle ALL mode, press 5 s to select OFF.
Note
•
If Shuffle ALL is selected, the selected songs being played back in the
search mode are canceled.
29-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The CD is being improperly inserted.
Make sure the CD is being inserted following instructions in the
CD Player Operation section.
–
Information
Unable to fast forward or backward the CD.
The CD has been damaged.
•
–
Eject the CD and discard it; using a damaged CD in your unit can
cause damage to the mechanism.
In Case of Difficulty
CD playback sound skips due to vibration.
If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the
unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.
•
•
•
•
Improper mounting of the unit.
Securely re-mount the unit.
The disc is very dirty.
Clean the disc.
The disc has scratches.
Change the disc.
The pick-up lens is dirty.
–
–
–
Basic
–
Do not use a commercially available lens cleaner disc. Consult
your nearest Alpine dealer.
No function or display.
•
Vehicle’s ignition is off.
If connected following instructions, the unit will not operate with
the vehicle’s ignition off.
–
CD playback sound skips without vibration.
The disc is dirty or scratched.
Clean the disc; damaged disc should be replaced.
•
•
•
Improper power lead (Red) and battery lead (Yellow) connections.
Check power lead and battery lead connections.
Blown fuse.
Check the fuse of the unit; replace with the proper value if
necessary.
–
–
Error displays (built-in CD player only).
Mechanical error.
•
–
–
Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the problem,
consult your nearest Alpine dealer.
•
Internal micro-computer malfunctioned due to interference noise
etc.
–
Press the RESET button with a ballpoint pen or other pointed
CD-R/CD-RW playback not possible.
Close session (finalization) has not been performed.
Perform finalization and attempt playback again.
article.
•
–
Radio
MP3
Unable to receive stations.
No antenna or open connection in cable.
•
MP3 is not played back.
Writing error occurred. The MP3 format is not compatible.
–
Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
•
–
Make sure the MP3 has been written in a supported format. Refer
supported by this device.
Unable to tune stations in the seek mode.
•
You are in a weak signal area.
–
Make sure the tuner is in the DX mode.
Audio
•
If the area you are in is a primary signal area, the antenna may not be
grounded and connected properly.
The sound is not output from the speakers.
Unit has no output signal of the internal amplifier.
–
Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
•
–
•
The antenna may not be the proper length.
–
Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
iPod
Broadcast is noisy.
•
The antenna is not the proper length.
Extend the antenna fully; replace it if it is broken.
The antenna is poorly grounded.
Make sure the antenna is grounded properly at its mounting
location.
iPod does not play and no sound is output.
–
•
The iPod has not been recognized.
Reset this unit and the iPod. Refer to “Initial System Start-Up” on
•
–
–
Indication for CD Player
CD
CD Player not functioning.
Out of operating temperature range +50°C (+120°F) for CD.
Allow the vehicle’s interior (or trunk) temperature to cool.
•
•
•
No CD is inserted.
–
–
Insert a CD.
CD playback sound is wavering.
Moisture condensation in the CD Module.
Although a disc is inserted, “NO DISC” is displayed and the unit does
not start to play or eject the disc.
•
–
Allow enough time for the condensation to evaporate (about
1 hour).
–
Remove the disc by following these steps:
Press the button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
CD insertion not possible.
A CD is already in the CD player.
Eject the CD and remove it.
•
–
30-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Indication for iPod Mode
•
•
Mechanism error.
1
Press the button and eject the CD.
If not ejecting, consult your Alpine dealer.
•
The iPod/iPhone is not connected.
–
Make sure the iPod/iPhone is correctly connected (refer to
2
When the error indication remains after ejecting, press the
button again.
If the error indication still does not turn off after pressing the
button for a few times, consult your Alpine dealer.
When “ERROR” is displayed:
If the disc cannot be ejected by pressing , press the RESET button
If the disc still cannot be ejected, consult your Alpine dealer.
Make sure the cable is not bent excessively.
•
•
There are no songs in the iPod/iPhone.
Download songs to the iPod/iPhone and connect to this unit.
–
•
A sampling rate/bit rate not supported by the unit is used.
–
Use a sampling rate/bit rate that is supported by the unit.
Communication error.
–
–
–
Turn the ignition key off, and then set to ON again.
Reset the iPod.
Check the display by reconnecting between the iPod/iPhone and
this unit, using the iPod/iPhone cable.
Indication for Flash Memory
•
•
A USB device that is not supported by the unit is connected.
–
Connect a USB device that is supported by the unit.
•
Caused by the iPod/iPhone Software Version not being compatible
with this unit.
–
Update the iPod/iPhone Software Version to be compatible with
this unit.
NO DEVICE
A Flash Memory is not connected.
–
Make sure the Flash Memory device is correctly connected and the
cable is not excessively bent.
•
•
The iPod/iPhone is not verified.
–
–
Reset the iPod.
Try another iPod/iPhone, if available.
•
•
•
No MP3 (file) is stored in the Flash Memory.
Connect the Flash Memory device after storing songs (files).
–
Power surge error.
Excessive voltage/current is supplied to the iPod/iPhone.
–
Try another iPod/iPhone, if available.
A sampling rate/bit rate not supported by the unit is used.
Use a sampling rate/bit rate that is supported by the unit.
–
BLUETOOTH mode
NO SUPPORT
Text information that is not recognizable by the unit has been input.
–
Use a Flash Memory device with input text information that is
supported by the unit.
•
The BLUETOOTH device is not connected.
–
Connect the BLUETOOTH device.
•
•
Communication error.
–
–
Turn the ignition key off, and then set to ON again.
Check the display by reconnecting between the Flash Memory and
this unit.
Power surge error.
Excessive voltage/current is supplied to the Flash Memory.
–
Try another Flash Memory, if available.
31-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL
Power Requirement
14.4 V DC
Specifications
(11~16 V allowable)
18 W RMS × 4
*
Power Output
FM TUNER SECTION
Tuning Range
87.7~107.9 MHz
9.3 dBf (0.8 μV/75 ohms)
13.5 dBf (1.3 μV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
*
Primary amplifier ratings per CEA-2006 Standard
•
•
Power output: measured at 4 Ohms and ≤ 1% THD+N
S/N: 80 dBA (reference: 1 W into 4 Ohms)
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Maximum Pre-Output Voltage 2 V/10 k ohms
Bass
14 dB at 60 Hz
14 dB at 10 kHz
10 dB at 100 Hz
1.5 kg (3 lbs. 4 oz)
Treble
Loudness
Weight
Capture Ratio
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
CHASSIS SIZE
Width
Height
Depth
530~1,710 kHz
22.5 μV/27 dB
178 mm (7")
50 mm (2")
161 mm (6–3/8")
CD PLAYER SECTION
Frequency Response
5~20,000 Hz ( 1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
NOSEPIECE SIZE
Width
Height
Depth
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
170 mm (6–3/4")
46 mm (1–13/16")
25 mm (1")
85 dB (at 1 kHz)
Note
•
Due to continuous product improvement, specifications and design are
subject to change without notice.
PICKUP
Wave length
795 nm
Laser power
CLASS I
USB SECTION
USB requirements
USB 1.1/2.0
Max. Power Consumption
USB Class
1,000 mA
Mass Storage
File System
FAT 12/16/32
MP3 Decoding
Number of Channels
Frequency Response
Total Harmonic Distortion
Dynamic Range
MPEG AUDIO Layer-3
2-Channel (Stereo)
5~20,000 Hz ( 1 dB)
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
*
Signal-to-Noise Ratio
Channel Separation
85 dB (at 1 kHz)
*
Frequency response may differ depending on the encoder software/bit
rate.
BLUETOOTH SECTION
BLUETOOTH Specification
BLUETOOTH V 3.0
Output Power
Profile
+4 dBm Max. (Power class 2)
HFP (Hands-Free Profile)
HSP (Head Set Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
32-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Before installing or connecting the unit, please read the following
CAUTION
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
WARNING
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or
product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY
TERMINAL.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP
METAL EDGE.
Failure to do so may result in electric shock or injury due to
electrical shorts.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use a
rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING
OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct
or hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
PRECAUTIONS
•
•
•
Be sure to disconnect the cable from the (−) battery post before
installing your CDE-133BT. This will reduce any chance of damage to
the unit in case of a short-circuit.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
Be sure to connect the color coded leads according to the diagram.
Incorrect connections may cause the unit to malfunction or damage
to the vehicle’s electrical system.
When making connections to the vehicle’s electrical system, be aware
of the factory installed components (e.g. on-board computer). Do not
tap into these leads to provide power for this unit. When connecting
the CDE-133BT to the fuse box, make sure the fuse for the intended
circuit of the CDE-133BT has the appropriate amperage. Failure to do
so may result in damage to the unit and/or the vehicle. When in
doubt, consult your Alpine dealer.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO
MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
•
•
The CDE-133BT uses female RCA-type jacks for connection to other
units (e.g. amplifier) having RCA connectors. You may need an
adaptor to connect other units. If so, please contact your authorized
Alpine dealer for assistance.
Be sure to connect the speaker (−) leads to the speaker (−) terminal.
Never connect left and right channel speaker cables to each other or
to the vehicle body.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF
CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult
a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE
OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number or the
engraved serial number is located on the bottom of the unit.
SERIAL NUMBER: [
]
]
]
]
INSTALLATION DATE: [
INSTALLATION TECHNICIAN: [
PLACE OF PURCHASE: [
33-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
For the screw marked “*2”, use an appropriate screw for the chosen
mounting location.
•
Installation
3
Slide the CDE-133BT into the dashboard until it clicks. This
ensures that the unit is properly locked and will not
accidentally come out from the dashboard. Install the
detachable front panel.
Caution
When you install this unit in your car, do not remove the
detachable front panel.
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in
place.
The main unit must be mounted within 35 degrees of the
horizontal plane, back to front.
Removal
1
2
Remove the detachable front panel.
Insert the bracket keys into the unit, along the guides on
either side. The unit can now be removed from the
mounting sleeve.
Detachable Front
Panel
This unit
Bracket keys
(Included)
Less than 35°
3
Pull the unit out, keeping it unlocked as you do so.
JAPANESE CAR
1
Remove the mounting sleeve from the main unit (refer to
Mounting Sleeve (Included)
Dashboard
Front Frame
Screws (M5 × 8)
(Included)
This unit
Ground Lead
3
*
Pressure Plates*
This unit
Mounting Bracket
*
If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
Note
•
Secure the ground lead of the unit to a clean metal spot using a screw
2
Reinforce the head unit with the metal mounting strap
(not supplied). Secure the ground lead of the unit to a
clean metal spot using a screw ( ) already attached to the
(*3) already attached to the vehicle’s chassis.
*1
vehicle’s chassis.
Mounting the Microphone
Connect each input lead coming from an amplifier to the
corresponding output lead coming from the left rear of the
CDE-133BT. Connect all other leads of the CDE-133BT according
to details described in the CONNECTIONS section.
For the sake of safety, mount the microphone in the following location.
•
•
•
In a stable and secure location.
In a location that does not inhibit safely driving the vehicle.
Mount the microphone in a location where the driver’s voice can
easily be picked up.
Screw
Hex Nut (M5)
2
Choose a location for the microphone that can easily pick up the driver’s
voice. Requiring the driver to move towards the microphone for
audibility causes a distraction that could be dangerous.
*
Bolt Stud
Metal
Mounting
Strap
1
*
This unit
Ground Lead
Chassis
34-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Microphone
POWER ANT
(Blue)
(Blue/White)
(Pink/Black)
To power antenna
REMOTE TURN-ON
To amplifier
Not used
AUDIO INTERRUPT IN
ILLUMINATION
(Orange)
To the instrument cluster illumination
lead
IGNITION
BATTERY
(Red)
Ignition Key
(Yellow)
GND
(Black)
Battery
(Gray)
Speakers
Front Right
SPEAKER
RIGHT FRONT
(Gray/Black)
(Violet/Black)
SPEAKER
RIGHT REAR
Rear Right
Rear Left
(Violet)
(Green)
SPEAKER
LEFT REAR
(Green/Black)
(White/Black)
SPEAKER
LEFT FRONT
Front Left
(White)
Speakers
Amplifier
Front or Subwoofers*
*
When Subwoofer is OFF: Output is for Front speakers. When Subwoofer is ON: Output is for Subwoofer.
35-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Microphone (Supplied)
USB Connection Terminal
Connect Flash Memory (sold separately)
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna, if
applicable.
To prevent external noise from entering the audio system.
•
•
•
•
Locate the unit and route the leads at least 10 cm away from the
car harness.
Keep the battery power leads as far away from other leads as
Note
•
This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
possible.
Connect the ground lead securely to a bare metal spot (remove
any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away
from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
Your Alpine dealer knows best about noise prevention
measures so consult your dealer for further information.
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your amplifier or
signal processor.
Audio Interrupt In Lead (Pink/Black)
Not used for this unit.
•
Illumination Lead (Orange)
This lead may be connected to the vehicle’s instrument cluster
illumination lead. This will allow the backlighting of this unit to dim
whenever the vehicle’s lights are turned on.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse box or
another unused power source which provides (+) 12V only when the
ignition is turned on or in the accessory position.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s battery.
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle. Make sure
the connection is made to bare metal and is securely fastened using
the sheet metal screw provided.
Right Front (+) Speaker Output Lead (Gray)
Right Front (−) Speaker Output Lead (Gray/Black)
Right Rear (−) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (−) Speaker Output Lead (Green/Black)
Left Front (−) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
Fuse Holder (10A)
Power Supply Connector
Steering Remote Control Interface Connector
To steering remote control interface box.
You can operate this unit from the vehicle’s control unit when an
Alpine Steering Remote Control Interface Box (optional) is
connected. For details, contact your Alpine dealer.
MIC Input Connector
To Microphone.
Antenna Receptacle
Front/Subwoofer Output RCA Connectors
RED is down and WHITE is up.
RCA Extension Cable (sold separately)
Front AUX Input Terminal
This terminal allows for input of audio from an external device (such
as a portable player), using a commercially-available converter cable.
36-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. (“Alpine”), are dedicated to quality craftsmanship and are pleased to offer
this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the
telephone numbers listed below.
You must supply proof of your purchase of the product.
PRODUCTS COVERED:
You must package the product securely to avoid damage during
shipment. To prevent lost packages it is recommended to use a
carrier that provides a tracking service.
This Warranty covers Car Audio Products and Related Accessories (“the
product”). Products purchased in the Canada are covered only in the
Canada. Products purchased in the U.S.A. are covered only in the U.S.A.
HOW WE LIMIT IMPLIED WARRANTIES:
LENGTH OF WARRANTY:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND
MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE
EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS
AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE OF THE PRODUCT.
This Warranty is in effect for one year from the date of the first
consumer purchase.
WHO IS COVERED:
This Warranty only covers the original purchaser of the product, who
must reside in the United States, Puerto Rico or Canada.
HOW WE EXCLUDE CERTAIN DAMAGES:
WHAT IS COVERED:
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND
CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE TERM
“INCIDENTAL DAMAGES” REFERS TO EXPENSES OF TRANSPORTING
THE PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF THE
ORIGINAL PURCHASER’S TIME, LOSS OF THE USE OF THE PRODUCT,
BUS FARES, CAR RENTALS OR OTHERS COSTS RELATING TO THE CARE
AND CUSTODY OF THE PRODUCT. THE TERM “CONSEQUENTIAL
DAMAGES” REFERS TO THE COST OF REPAIRING OR REPLACING OTHER
PROPERTY WHICH IS DAMAGED WHEN THIS PRODUCT DOES NOT
WORK PROPERLY. THE REMEDIES PROVIDED UNDER THIS WARRANTY
ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
This Warranty covers defects in materials or workmanship (parts and
labor) in the product.
WHAT IS NOT COVERED:
This Warranty does not cover the following:
Damage occurring during shipment of the product to Alpine for
repair (claims must be presented to the carrier).
Damage caused by accident or abuse, including burned voice coils
caused by over-driving the speaker (amplifier level is turned up
and driven into distortion or clipping). Speaker mechanical failure
(e.g. punctures, tears or rips). Cracked or damaged LCD panels.
Dropped or damaged hard drives.
Damage caused by negligence, misuse, improper operation or
failure to follow instructions contained in the Owner’s manual.
Damage caused by act of God, including without limitation,
earthquake, fire, flood, storms or other acts of nature.
Any cost or expense related to the removal or reinstallation of the
product.
Service performed by an unauthorized person, company or
association.
Any product which has the serial number defaced, altered or
removed.
Any product which has been adjusted, altered or modified without
Alpine’s consent.
HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may also have
other rights which vary from state to state and province to province. In
addition, some states/provinces do not allow limitations on how long
an implied warranty lasts, and some do not allow the exclusion or
limitation of incidental or consequential damages. Accordingly,
limitations as to these matters contained herein may not apply to you.
IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio product has
been installed in your vehicle by an Authorized Installation Center, and
this warranty stamped upon installation by the installation center.
Any product not distributed by Alpine within the United States,
Puerto Rico or Canada.
Any product not purchased from an Authorized Alpine Dealer.
HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following number
for your nearest Authorized Alpine Service Center.
CAR AUDIO
1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
HOW TO OBTAIN WARRANTY SERVICE:
You are responsible for delivery of the product to an Authorized
Alpine Service Center or Alpine for repair and for payment of any
initial shipping charges. Alpine will, at its option, repair or replace
the product with a new or reconditioned product without charge.
If the repairs are covered by the warranty, and if the product was
shipped to an Authorized Alpine Service Center or Alpine, Alpine
will pay the return shipping charges.
NAVIGATION
You should provide a detailed description of the problem(s) for
which service is required.
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate a service center.
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Rules of Bluetooth Electromagnetic Radiation Regulation
USA/Canada
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of this device.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
México
Este equipo opera a titulo secundario, consecuentemente, debe aceptar interferencias perjudiciales incluyendo
equipos de la misma clase y puede no causar interferencias a sistemas operando a titulo primario.
Don’t forget to take a moment to protect your purchase by registering your product now at the following
N’oubliez pas de consacrer un moment à la protection de votre achat en enregistrant votre produit dès
Recuerde que con solo unos pocos pasos podrá proteger su producto, registrándolo a través de la siguiente
Download from Www.Somanuals.com. All Manuals Search And Download.
|