Alpine Car Stereo System 68 21627Z10 A User Manual

EN  
FR  
ES  
R
ADVANCED BLUETOOTH CD/HD RADIO RECEIVER  
CDE-HD138BT/CDE-HD137BT  
This HD Radio receiver enables:  
(CDE-HD138BT only)  
OWNER’S MANUAL  
Please read before using this equipment.  
MODE D’EMPLOI  
Veuillez lire avant d’utiliser cet appareil.  
MANUAL DE OPERACIÓN  
Léalo antes de utilizar este equipo.  
Thank you for purchasing this Alpine product. Please take a moment to protect your purchase by  
You will be informed of product and software updates (if applicable), special promotions, news  
about Alpine, and entered for a chance to win prizes.  
Merci d’avoir acheté ce produit Alpine. Nous vous invitons à consacrer un moment à la protection  
de votre achat en enregistrant votre produit dès maintenant à l’adresse suivante :  
Vous serez tenu informé des mises à jour des produits et des logiciels (le cas échéant), des  
promotions spéciales, de l’actualité d’Alpine, et vous aurez une chance de remporter des prix.  
Gracias por adquirir este producto Alpine. Con solo unos pocos pasos podrá proteger su producto,  
Recibirá información sobre nuevos productos y software, promociones especiales, novedades sobre  
Alpine y participará en el sorteo de premios.  
ALPINE ELECTRONICS OF AMERICA, INC.  
19145 Gramercy Place, Torrance,  
California 90501, U.S.A.  
ALPINE ELECTRONICS OF CANADA, INC.  
777 Supertest Road, Toronto,  
Ontario M3J 2M9, Canada  
Phone 1-800-ALPINE-1 (1-800-257-4631)  
Phone 1-800-ALPINE-1 (1-800-257-4631)  
Designed by ALPINE Japan  
68-21627Z10-A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
Contents  
Adjusting Subwoofer Level/Bass Level/Middle  
Level/Treble Level/Balance (Between Left and  
Loudness/Defeat.......................................................16  
Equalizer Presets (F-EQ)  
Turning Loudness On/Off  
Adjusting the Parametric Equalizer Curve  
Setting the Center Frequency  
Adjusting the Graphic Equalizer Curve  
Storing the P.EQ/G.EQ Settings  
Recalling the Stored P.EQ/G.EQ Adjustment  
Setting the Media Xpander mode  
Adjusting the Parametric Equalizer Curve  
Multicast Station Search  
Receiving a Multicast Station  
Storing the tag information  
Connecting to an External Amplifier  
Folder/File Name Search  
3-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
Contents  
Setting the caller information display/  
Setting text message indicator ON/OFF  
Setting the TUNER (FM) tone quality  
Confirming the strength of the SiriusXM  
Setting the caller information display ON/OFF  
Setting the Received Calls automatically  
Displaying the phone service provider  
Dialing a Number In Incoming Missed Call  
How to connect to a BLUETOOTH  
Pairing a BLUETOOTH compatible device with  
Pairing a BLUETOOTH compatible device  
Setting the BLUETOOTH Connection  
BLUETOOTH Pandora® setting  
Pairing a BLUETOOTH Device from the  
Preset a number in the Phone Book  
Adjusting the volume when receiving a  
Muting the microphone input quickly  
Listening to Pandora®.............................................33  
4-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
Contents  
Playing MP3/WMA/AAC Files from Flash  
Indication for Pandora® Mode.........................43  
SiriusXM Advisory Messages  
About MP3/WMA/AAC File of Flash  
Select Playlist/Artist/Album/Genre/  
SiriusXM Satellite Radio Operation  
Receiving Channels with the SiriusXM  
Using Jump Memory and Jump Recall  
5-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
CAUTION  
This symbol means important instructions. Failure  
to heed them can result in injury or material  
property damage.  
WARNING  
WARNING  
This symbol means important instructions. Failure  
to heed them can result in serious injury or death.  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.  
Failure to do so may cause personal injury or damage to the  
product. Return it to your authorized Alpine dealer or the nearest  
Alpine Service Center for repairing.  
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY  
FROM SAFELY DRIVING YOUR VEHICLE.  
Any function that requires your prolonged attention should only be  
performed after coming to a complete stop. Always stop the vehicle  
in a safe location before performing these functions. Failure to do so  
may result in an accident.  
PRECAUTIONS  
Product Cleaning  
Use a soft dry cloth for periodic cleaning of the product. For more  
severe stains, please dampen the cloth with water only. Anything  
else has the chance of dissolving the paint or damaging the plastic.  
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE  
NOISES WHILE DRIVING.  
Excessive volume levels that obscure sounds such as emergency  
vehicle sirens or road warning signals (train crossings, etc.) can be  
dangerous and may result in an accident. LISTENING AT LOUD  
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING  
DAMAGE.  
Temperature  
Be sure the temperature inside the vehicle is between +60°C  
(+140°F) and −10°C (+14°F) before turning your unit on.  
Moisture Condensation  
You may notice the CD playback sound wavering due to  
condensation. If this happens, remove the disc from the player and  
wait about an hour for the moisture to evaporate.  
MINIMIZE DISPLAY VIEWING WHILE DRIVING.  
Viewing the display may distract the driver from looking ahead of  
the vehicle and cause an accident.  
Damaged Disc  
DO NOT DISASSEMBLE OR ALTER.  
Do not attempt to play cracked, warped, or damaged discs. Playing  
a bad disc could severely damage the playback mechanism.  
Doing so may result in an accident, fire or electric shock.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.  
(Check with your dealer if you are not sure.) Failure to do so may  
result in fire, etc.  
Maintenance  
If you have problems, do not attempt to repair the unit yourself.  
Return it to your Alpine dealer or the nearest Alpine Service Station  
for servicing.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF  
CHILDREN.  
Swallowing them may result in serious injury. If swallowed, consult  
a physician immediately.  
Never Attempt the Following  
Do not grip or pull out the disc while it is being pulled back into the  
player by the automatic reloading mechanism.  
Do not attempt to insert a disc into the unit when the unit power is  
off.  
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.  
Failure to do so may result in fire or electric shock.  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Doing so may cause heat to build up inside and may result in fire.  
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.  
Use for other than its designed application may result in fire,  
electric shock or other injury.  
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION  
SLOTS OR GAPS.  
Doing so may result in personal injury or damage to the product.  
6-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Inserting Discs  
Disc Cleaning  
Your player accepts only one disc at a time for playback. Do not  
attempt to load more than one disc.  
Make sure the label side is facing up when you insert the disc.  
“ERROR” will be displayed on your player if you insert a disc  
incorrectly. If “ERROR” continues to be displayed even though the  
disc has been inserted correctly, push the RESET button with a  
pointed object such as a ballpoint pen.  
Fingerprints, dust, or soil on the surface of the disc could cause the  
CD player to skip. For routine cleaning, wipe the playing surface  
with a clean, soft cloth from the center of the disc to the outer edge.  
If the surface is heavily soiled, dampen a clean, soft cloth in a  
solution of mild neutral detergent before cleaning the disc.  
Playing a disc while driving on a very bumpy road may result in  
skips, but this will not scratch the disc or damage the player.  
New Discs  
To prevent the CD from jamming, “ERROR” is displayed if discs  
with irregular surfaces are inserted or if discs are inserted  
incorrectly. When a new disc is ejected immediately after initial  
loading, use your finger to feel around the inside of the center hole  
and outside edge of the disc. If you feel any small bumps or  
irregularities, this could inhibit proper loading of the disc. To  
remove the bumps, rub the inside edge of the hole and outside edge  
of the disc with a ballpoint pen or other such instrument, then  
insert the disc again.  
Disc Accessories  
There are various accessories available on the market for protecting  
the disc surface and improving sound quality. However, most of  
them will influence the thickness and/or diameter of the disc. Using  
such accessories can cause the disc to be out of standard  
specifications and may create operational problems. We  
recommend not using these accessories on discs played in Alpine  
CD players.  
Center Hole  
Center Hole  
New Disc  
Outside  
(Bumps)  
Bumps  
Transparent Sheet  
Disc Stabilizer  
On handling Compact Discs (CD/CD-R/CD-RW)  
Irregular Shaped Discs  
Do not touch the surface.  
Do not expose the disc to direct sunlight.  
Do not affix stickers or labels.  
Clean the disc when it is dusty.  
Make sure that there are no bumps around the disc.  
Do not use commercially available disc accessories.  
Be sure to use round shape discs only for this unit and never use any  
special shape discs.  
Use of special shape discs may cause damage to the mechanism.  
Do not leave the disc in the car or the unit for a long time. Never  
expose the disc to direct sunlight. Heat and humidity may damage  
the CD and you may not be able to play it again.  
To customers using CD-R/CD-RW  
Installation Location  
Make sure this unit will not be installed in a location subjected to:  
If a CD-R/CD-RW cannot be played back, make sure the last  
recording session was closed (finalized).  
Direct sun and heat  
High humidity and water  
Excessive dust  
Finalize the CD-R/CD-RW if necessary, and attempt playback again.  
About media that can be played  
The following table shows which discs can be played on which  
models.  
Excessive vibrations  
Correct Handling  
CD  
CD-TEXT  
MP3  
WMA  
AAC  
Do not drop the disc while handling. Hold the disc so you will not  
leave fingerprints on the surface. Do not affix tape, paper, or  
gummed labels to the disc. Do not write on the disc.  
CDE-HD137BT  
CDE-HD138BT  
CORRECT  
Use only compact discs with the label side showing the CD logo  
marks below.  
INCORRECT  
CORRECT  
If you use unspecified compact discs, correct performance cannot  
be guaranteed.  
You can play CD-Rs (CD-Recordables)/CD-RWs  
(CD-ReWritables) which have been recorded only on audio devices.  
You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC  
formatted audio files.  
7-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Some of the following CDs may not play on this unit:  
Flawed CDs, CDs with fingerprints, CDs exposed to extreme  
temperatures or sunlight (e.g. left in the car or this unit), CDs  
recorded under unstable conditions, CDs on which a recording failed  
or a re-recording was attempted, copy-protected CDs which do not  
conform to the audio CD industry standard.  
It is recommended to back up important data on a personal  
computer.  
Do not remove the USB device while playback is in progress. Change  
SOURCE to something other than USB, and then remove the USB  
device to prevent possible damage to its memory.  
Use discs with MP3 files written in a format compatible with this  
ROM data other than audio files contained in a disc will not produce  
sound when played back.  
iPhone, iPod, iPod classic, iPod nano, iPod touch, and iTunes are  
trademarks of Apple Inc., registered in the U.S. and other countries.  
“Made for iPod,” and “Made for iPhone,” mean that an electronic  
accessory has been designed to connect specifically to iPod, or  
iPhone, respectively, and has been certified by the developer to meet  
Apple performance standards. Apple is not responsible for the  
operation of this device or its compliance with safety and regulatory  
standards. Please note that the use of this accessory with iPod, or  
iPhone may affect wireless performance.  
Protecting the USB Connection Terminal  
Only USB Flash Memory devices can be connected to the USB  
connection terminal on this unit. Correct performance using other  
USB products cannot be guaranteed. A USB hub is not supported.  
Depending on the shape or size of the device, it may not be connected  
to the USB terminal of this unit-a USB extension cable (sold  
separately) is recommended for this connection.  
Also, avoid connecting Flash Memory and Front Aux at the same  
time.  
A USB device inserted into the unit, may project out far enough to be  
a danger while driving. Use a commercially available USB extension  
cable, and connect it in a safe way.  
Depending on the connected Flash Memory device, the unit may not  
function or some functions may not be performed.  
MP3/WMA/AAC is the only audio file format playable on this unit.  
Artist/song name, etc., can be displayed, however not all characters  
may be correctly displayed.  
Pandora, the Pandora logo, and the Pandora trade dress are  
trademarks or registered trademarks of Pandora Media, Inc., used  
with permission. Pandora is currently available exclusively in the  
United States.  
This device will control Pandora when connected to a compatible  
®
Android or BlackBerry phone that has Bluetooth, access to the  
®
internet, and the latest version of the Pandora application  
installed.  
BlackBerry , RIM , Research In Motion , SureType and related  
trademarks, names and logos are the property of Research In Motion  
Limited and are registered and/or used in the U.S. and countries  
around the world. Used under license from Research In Motion  
Limited.  
®
®
®
®
Android is a trademark of Google Inc.  
The BLUETOOTH word mark and logos are registered  
®
On Handling Flash Memory  
trademarks owned by the Bluetooth SIG, Inc. and any use of such  
marks by Alpine Electronics, Inc. is under license.  
CAUTION  
HD Radio Technology manufactured under license from iBiquity  
Alpine accepts no responsibility for lost data, etc., even if data,  
etc., is lost while using this product.  
Digital Corporation. U.S. and Foreign Patents. HD Radio and the  
HD, HD Radio, and “Arc” logos are proprietary trademarks of  
iBiquity Digital Corp.  
To prevent malfunction or damage, note the following points.  
Read the Flash Memory Owners Manual thoroughly.  
Do not touch the terminals by hand or metal.  
Do not subject Flash Memory to excessive shock.  
Do not bend, drop, disassemble, modify or soak in the water.  
Avoid usage or storage in the following locations:  
Anywhere in the car exposed to direct sunlight or high temperatures.  
Anywhere the possibility of high humidity or corrosive substances is  
present.  
Fix the Flash Memory in a location where driver operation will not be  
hindered.  
Flash Memory may not function correctly at high or low temperature.  
The USB Flash Memory supports only 512 or 2,048 bytes per sector.  
Use only certified Flash Memory. Note that even certified Flash  
Memory, may not function correctly depending on its type or state.  
Flash Memory function is not guaranteed. Use Flash Memory  
according to the terms of agreement.  
Depending on the settings of the Flash Memory type, memory state  
or encoding software, the unit may not play back or display properly.  
A file that is copy-protected (copyright protection) cannot be played  
back.  
SIRIUS, XM and all related marks and logos are trademarks of  
SIRIUS XM Radio Inc. and its subsidiaries. All rights reserved.  
Windows Media, and the Windows logo are trademarks, or  
registered trademarks of Microsoft Corporation in the United States  
and/or other countries.  
“MPEG Layer-3 audio coding technology licensed from Fraunhofer  
IIS and Thomson.”  
“Supply of this product only conveys a license for private,  
non-commercial use and does not convey a license nor imply any  
right to use this product in any commercial (i.e. revenue-generation)  
real time broadcasting (terrestrial, satellite, cable and/or any other  
media), broadcasting/streaming via internet, intranets and/or other  
networks or in other electronic content distribution systems, such as  
pay-audio or audio-on-demand applications. An independent  
license for such use is required. For details, please visit  
Flash Memory may take time to start playback. If there is a particular  
file other than audio in the Flash Memory, it may take considerable  
time before the file is played back or searched.  
The unit can play back “mp3, wma” or “m4a” file extensions.  
Do not add the above extension to a file other than audio data. This  
non-audio data will not be recognized. The resulting playback may  
contain noise that can damage speakers and/or amplifiers.  
8-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detaching and Attaching the Front Panel  
Getting Started  
Detaching  
SOURCE/  
Rotary encoder/ /ENTER  
1
2
Turn off the unit power.  
Press e at the lower left side until the front panel pops  
out.  
3
Grasp the left side of the front panel and pull it out.  
AUDIO/SETUP  
Notes  
Accessory List  
The front panel may become hot in normal usage (especially the  
connector terminals on the back of the front panel). This is not a  
malfunction.  
Head Unit ..................................................................................1  
Power Cable ..............................................................................1  
Microphone ..............................................................................1  
Mounting Sleeve ......................................................................1  
Carrying Case............................................................................1  
Bracket key ...............................................................................2  
Screw (M5 × 8) ..........................................................................4  
Owners Manual..................................................................1 set  
To protect the front panel, place it in the supplied carrying case.  
When detaching the front panel, do not apply excessive force as it may  
result in malfunction.  
Attaching  
1
2
Insert the right side of the front panel into the main unit.  
Align the groove on the front panel with the projections  
on the main unit.  
Turning Power On and Off  
Push the left side of the front panel until it locks firmly into  
the main unit.  
Press SOURCE to turn on the unit.  
Note  
The unit can be turned on by pressing any other button except and  
e.  
Press and hold SOURCE for at least 2 seconds to turn  
off the unit.  
Note  
The first time power is turned on, the volume will start from level 12.  
Notes  
Before attaching the front panel, make sure that there is no dirt or dust  
Source Selection  
on the connector terminals and no foreign object between the front  
panel and the main unit.  
Attach the front panel carefully, holding the sides of the front panel to  
avoid pushing buttons by mistake.  
Press SOURCE to change the source.  
HD RADIO SIRIUSXM*1 DISC USB AUDIO/iPod*2  
BT AUDIO*3 BT PANDORA*4 AUXILIARY*5 HD RADIO  
*1 Displayed only when a SiriusXM Tuner is connected.  
(CDE-HD138BT only)  
Initial System Start-Up  
*2 Only when the iPod/iPhone is connected.  
*3 Only when AUDIO is set to ON. Refer to “Setting the  
*4 Only when BT PANDORA is set to ON. Refer to “Setting the  
*5 Only when AUX SETUP is set to ON. For details, refer to  
Be sure to press the RESET button when using the unit for the first time,  
after changing the car battery, etc.  
1
2
Turn off the unit power.  
Remove the detachable front panel.  
9-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
3
Press RESET with a ballpoint pen or similar pointed object.  
Radio/HD Radio™  
Reception  
RESET button  
SOURCE/  
Rotary encoder  
/ENTER  
Adjusting Volume  
Turn the Rotary encoder until the desired sound is  
obtained.  
VIEW  
/Tag  
BAND  
Setting Time  
Preset buttons  
(1 through 6)  
TUNE/A.ME  
1
2
Press and hold AUDIOSETUP for at least 2 seconds to  
activate the SETUP selection mode.  
This unit is able to receive signals based on the terrestrial digital radio  
broadcasting standard.  
When current AM/FM broadcasters are transmitting digital audio and  
data services, HD Radio signals are on-the-air in their service area. You  
can receive their digital broadcast and enjoy high quality sound.  
Depending on the setting of LISTENMODE, this unit will choose to  
receive Digital signals or Analog signals. For details, please refer to  
While receiving a live broadcast, you can fix on either Digital signals or  
Analog signals to receive. For details, refer to “Setting the Live mode  
Turn the Rotary encoder to select GENERAL, and then  
press ENTER.  
AUDIO GENERAL DISPLAY TUNER SIRIUSXM* iPod  
BLUETOOTH  
*
Only for CDE-HD138BT.  
3
4
Turn the Rotary encoder to select the CLOCK ADJ mode,  
and then press ENTER.  
The time indication will blink.  
Turn the Rotary encoder to adjust the hours while the  
time indication is blinking.  
Listening to Radio  
1
2
3
Press SOURCE to select HD RADIO mode.  
5
6
When the hour has been adjusted, press ENTER.  
Note  
Turn the Rotary encoder to adjust the minutes while the  
time indication is blinking.  
While receiving HD Radio signals, indicator lights up.  
Press BAND repeatedly until the desired radio band is  
displayed.  
F1 (FM1) F2 (FM2) AM F1 (FM1)  
7
Press and hold AUDIOSETUP for at least 2 seconds to  
return to normal mode.  
Notes  
Press TUNE/A.ME to select the tuning mode.  
SEEK DX (Distance mode) SEEK LO (Local mode)   
MANUAL (Manual mode) SEEK DX  
To synchronize the clock to another clock/watch or radio time  
announcement, press and hold ENTER for at least 2 seconds after  
setting the “hour”. Minutes will reset to “00”. If the display shows over  
“30” minutes when you do this, the time will advance one hour.  
Pressing will return to the previous mode.  
Note  
The initial mode is Distance mode.  
Pressing and holding for at least 2 seconds will return to normal  
mode.  
If no operation is performed for 60 seconds, the unit will return to  
normal mode automatically.  
Distance mode:  
Both strong and weak stations will be automatically tuned in  
(Automatic Seek Tuning).  
Local mode:  
Only strong stations will be automatically tuned in (Automatic  
Seek Tuning).  
Controllable with Remote Control  
This unit can be controlled with an optional Alpine remote control.  
For details, consult your Alpine dealer. Point the optional remote  
control transmitter at the remote-control sensor.  
Manual mode:  
The frequency is manually tuned in steps (Manual tuning).  
4
Press or to tune in the desired station.  
Remote control sensor  
Holding down or will change the frequency  
continuously.  
Note  
If SEEK TYPE is set to DIGITAL, the SEEK UP/DOWN functions only  
stop on digital station frequencies while receiving HD Radio signal.  
10-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Presetting Stations Manually  
Frequency Search Function  
You can search for a radio station by its frequency.  
1
2
Select the radio band and tune in a desired radio station  
you wish to store in the preset memory.  
1
2
Press ENTER in Radio mode to activate the search  
mode.  
Press and hold (for at least 2 seconds) any one of the  
preset buttons (1 through 6) into which you wish to store  
the station.  
Turn the Rotary encoder to select “F SEARCH, and then  
press ENTER to enter the frequency search mode. *  
The selected station is stored.  
The display shows the band, preset number and station  
frequency memorized.  
*
Operation is not required when LISTENMODE is set to ANALOG  
3
4
Turn the Rotary encoder to select the desired frequency.  
Press ENTER to receive the selected frequency.  
Notes  
A total of 18 stations can be stored in the preset memory (6 stations for  
each band; FM1, FM2 and AM).  
If you store a station in a preset memory which already has a station,  
the current station will be cleared and replaced with the new station.  
Note  
Press and hold for at least 2 seconds in the search mode to cancel.  
Or, the search mode will be canceled if no operation is performed for  
60 seconds.  
Presetting Stations Automatically  
Multicast Station Search  
(HD Radio mode only)  
1
2
Press BAND repeatedly until the desired radio band is  
displayed.  
Press and hold TUNE/A.ME for at least 2 seconds.  
If a frequency has a Multicast station broadcast, the Multicast indicator  
lights up. Use the Multicast search mode to select a desired program  
from the Multicast stations available.  
The tuner will automatically seek and store 6 strong stations in  
the selected band. They will be stored into preset buttons 1 to 6  
in order of signal strength.  
When the automatic memory has been completed, the tuner  
goes to the station stored in preset location No.1.  
Note  
Make sure LISTENMODE is set to other than ANALOG (refer to  
Notes  
If no stations are stored, the tuner returns to the station you were  
1
2
3
Choose a frequency with the Multicast indicator on.  
Press ENTER to activate the search mode.  
listening to before the auto memory procedure began.  
Sub-program service of Multicast stations are not included in the  
automatic memory search.  
Turn the Rotary encoder to select MULTI CAST, and then  
press ENTER to enter the Multicast search mode.  
Tuning to Preset Stations  
4
Turn the Rotary encoder to select the desired station, and  
then press ENTER. The selected station is received.  
1
2
Press BAND repeatedly until the desired band is  
displayed.  
Notes  
Press VIEW k at step 4. You can change the display between station  
name and program type.  
Press and hold for at least 2 seconds in the search mode to cancel.  
Or, the search mode will be canceled if no operation is performed for 60  
seconds.  
Press any one of the station preset buttons (1 through 6)  
that has your desired radio station in memory.  
The display shows the band, preset number and frequency of  
the station selected.  
Note  
If the digital signal for any service becomes weak, none of the digital  
features are available. For example, a Multicast channel recalled from  
preset memory will revert to the Main Program Service with loss of the  
digital signal (“SIG LOSS” is displayed). Upon return of the digital  
signal strength, the tuner will resume playback of the Multicast channel.  
11-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Notes  
During tagging, the iPod/iPhone takes priority to save the tag  
Receiving a Multicast Station  
(HD Radio mode only)  
information. If no iPod/iPhone is connected, the tag information is  
saved to this unit.  
When the memory of iPod/iPhone is full, “iPod FULL” and “TAG  
COUNT X” are displayed. The tag information will be stored to the  
unit.  
If the operation is failed, “CANNOT TAG” is displayed.  
This unit can store a maximum of 50 tagged songs. When the memory  
of the unit is full, “TAGCOUNT50” and “MEMO FULL” are displayed.  
When an iPod that doesn’t support the tagging function is connected,  
“NON-TAGGING IPOD” is displayed.  
When the iPod/iPhone is disconnected from the unit during tagging, its  
tag information will be stored in the unit.  
Multicasting is the ability to broadcast multiple program streams over a  
single FM frequency. This increases the amount and diversity of content  
choices. A maximum of eight multicast station channels can be selected  
on this unit.  
Note  
Make sure LISTENMODE is set to other than ANALOG (refer to  
If there is stored tag information on the unit, when an iPod/iPhone  
supporting the tag function is connected, the stored tag information will  
be transferred to the iPod/iPhone automatically. When the iPod/iPhone  
memory becomes full, “iPod FULL” will be displayed, and any  
remaining tag information on the unit will not be transferred to the  
iPod/iPhone.  
When multicast station is received, the program number  
and the Multicast indicator lights up. Press or to  
select the desired program service.*  
Receiving the Multicast Station Program Service.  
Program No.  
If a tagged song already exists, “ALREADY TAGGED” will be displayed  
when you try to tag the song again.  
About the Feature Logos  
Multicast indicator  
Program Service example:  
Multicast Radio  
Program No.  
Program Service  
Digital, CD-quality sound. HD Radio Technology enables local radio  
stations to broadcast a clean digital signal. AM sounds like todays  
FM and FM sounds like a CD.  
Station  
88.1 MHz  
88.1 MHz  
88.1 MHz  
1
2
3
|
Main Program Service  
Sub-program Service  
Sub-program Service  
|
Program Service Data: Contributes to the superior user experience of  
HD Radio Technology. Presents song name, artist, station IDs, HD2/  
HD3 Channel Guide, and other relevant data streams.  
|
|
88.1 MHz  
8
Sub-program Service  
*
This operation can be performed only when MC SEEK is set to ON  
Adjacent to traditional main stations are extra local FM channels.  
These HD2/HD3 Channels provide new, original music as well as  
deep cuts into traditional genre.  
Storing the tag information  
(HD Radio mode only)  
®
iTunes Tagging provides you the opportunity to discover a wide  
iTunes Tagging lets you tag songs heard on HD Radio stations. You can  
preview, buy and download later, songs from your iTunes tagged playlist  
the next time you sync your iPod/iPhone. If the unit is connected to a  
Tagging compatible iPod/iPhone, you can use the iTunes Tagging  
function. For details, refer to the Owners Manual of the Tagging  
compatible iPod/iPhone.  
range of content and the means to “tag” that content for later review  
®
and purchase from the iTunes Store.  
The m indicator will light when a song playing on an HD Radio  
station has tag information available.  
Press and hold VIEW k/Tag for at least 2 seconds to save  
its tag information.  
If no iPod/iPhone is connected, “TAG COUNT X” is displayed (X is  
the total number of tagged songs stored in this unit).  
12-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Notes  
Do not remove a CD during its eject cycle. Do not load more than one  
CD/MP3/WMA/AAC  
disc at a time. A malfunction may result from doing either.  
The “” indicator lights up when a disc is inserted.  
Three-inch (8 cm) CDs can not be used.  
The track number displayed for Mp3/WMA/AAC playback is its  
corresponding file number recorded on the disc.  
SOURCE/  
Rotary encoder/ /ENTER  
The playback time may not be correctly displayed when a VBR  
(Variable Bit Rate) recorded file is played back.  
During CD/MP3/WMA/AAC playback, press to return to the last  
selected search mode.  
Any file protected by DRM (Digital Rights Management) copy  
protection, cannot be played back on this unit.  
Repeat Play  
12  
4
5
1
Press a4.  
The song is played back repeatedly.  
a*1 a*2 (off) a  
About media that can be played  
The following table shows which discs can be played on which models.  
CD  
CD-TEXT  
MP3  
WMA  
AAC  
*1 Only a track/file is repeatedly played back.  
*2 Only files in a folder are repeatedly played back. (MP3/WMA/  
AAC mode only)  
CDE-HD137BT  
CDE-HD138BT  
2
To cancel repeat play, select (off) with the above  
procedure.  
Playback  
M.I.X. (Random Play)  
1
Insert a disc with the label side facing up.  
The disc will be pulled into the unit automatically.  
1
Press 5s.  
The songs are played back in random sequence.  
s*1 g*2/*3 (off) s  
*1 Only files in a folder are played back in random sequence.  
(MP3/WMA/AAC mode)  
*2 The tracks/files in the disc are played back in random sequence.  
(CD or MP3/WMA/AAC mode)  
*3 In the USB mode, all files stored in the Flash Memory are played  
back in random sequence.  
Note  
When a disc is already inserted, press SOURCE to switch to the  
DISC mode.  
2
To cancel M.I.X. play, select (off) with the above procedure.  
2
3
While playing back MP3/WMA/AAC, press 1or 2 to  
select the desired folder.  
Searching for CD Text  
Pressing and holding 1or 2 will change folders continuously.  
On discs utilizing CD Text, songs can be searched and played by using  
their recorded titles. For discs without CD Text, searches are made using  
the track numbers associated with each song.  
Press or to select the desired track (file).  
Pressing and holding or will fast backward/fast  
forward track continuously.  
1
2
Press ENTER during play.  
This will set the search mode, and the “” indicator lights up.  
4
5
To pause playback, press .  
Pressing again will resume playback.  
Turn the Rotary encoder to select the desired track, and  
then press ENTER.  
To eject the disc, press .  
This will play the selected track.  
Notes  
Press in the search mode to cancel. Or, the search mode is canceled  
if no operation is performed for 60 seconds.  
When CD Text Search is made during M.I.X. play, the M.I.X. play  
mode will be canceled.  
13-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Folder/File Name Search  
About MP3/WMA/AAC  
(concerning MP3/WMA/AAC)  
CAUTION  
Folder and file names may be searched and displayed during playback.  
Except for private use, duplicating audio data (including MP3/  
WMA/AAC data) or distributing, transferring, or copying it,  
whether for free or for a fee, without permission of the copyright  
holder is strictly prohibited by the Copyright Act and by  
international treaty.  
Folder Name Search mode  
1
2
During MP3/WMA/AAC playback, press ENTER to  
activate the search mode.  
What is MP3?  
MP3, whose official name is “MPEG Audio Layer 3,is a compression  
standard prescribed by the ISO, the International Standardization  
Organization and MPEG which is a joint activity institution of the IEC.  
MP3 files contain compressed audio data. MP3 encoding is capable of  
compressing audio data at extremely high ratios, reducing the size of  
music files to as much as one-tenth their original size. This is achieved  
while still maintaining near CD quality. The MP3 format realizes such  
high compression ratios by eliminating the sounds that are either  
inaudible to the human ear or masked by other sounds.  
The “” indicator lights up.  
Turn the Rotary encoder to select Folder Name Search  
mode, and then press ENTER.  
3
4
Turn the Rotary encoder to select the desired folder.  
Press and hold ENTER for at least 2 seconds to play  
back the first file in the selected folder.  
What is AAC?  
AAC is the abbreviation for “Advanced Audio Coding, and is a basic  
format of audio compression used by MPEG2 or MPEG4.  
Notes  
Press and hold for at least 2 seconds in the search mode to cancel.  
Or, the search mode is canceled if no operation is performed for 60  
seconds.  
What is WMA?  
WMA, or “Windows MediaAudio,” is compressed audio data. WMA is  
similar to MP3 audio data.  
To search for files within a folder, press ENTER. Files in the folder  
may be searched.  
Press to exit Folder Name Search mode in step 3.  
The root folder is displayed as “ROOT”.  
When Folder Name Search is made during M.I.X. play, the M.I.X. play  
mode will be canceled.  
Method for creating MP3/WMA/AAC files  
Audio data is compressed using software with MP3/WMA/AAC codes.  
For details on creating MP3/WMA/AAC files, refer to the user’s manual  
for that software.  
MP3/WMA/AAC files that are playable on this device have the file  
extensions.  
MP3: “mp3”  
File Name Search mode  
WMA: “wma” (Ver. 7, 8, and 9 are supported)  
AAC: “m4a”  
There are many different versions of the AAC format. Confirm that the  
software being used conforms to the acceptable formats listed above.  
Its possible that the format may be unplayable even though the  
extension is valid.  
1
2
During MP3/WMA/AAC playback, press ENTER to  
activate the search mode.  
The “” indicator lights up.  
Turn the Rotary encoder to select File Name Search mode,  
and then press ENTER.  
Playback of AAC files encoded by iTunes is supported.  
Supported playback sampling rates and bit rates  
MP3  
3
4
Select the desired file by turning the Rotary encoder.  
Press ENTER to play back the selected file.  
Sampling rates:  
48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,  
12 kHz, 11.025 kHz, 8 kHz  
Bit rates:  
8 - 320 kbps  
Notes  
WMA  
Sampling rates:  
Bit rates:  
Press and hold for at least 2 seconds in the search mode to cancel.  
Or, the search mode is canceled if no operation is performed for 60  
seconds.  
48 kHz, 44.1 kHz, 32 kHz  
32 - 192 kbps  
Press in the search mode to return to the previous mode.  
When File Name Search is made during M.I.X. play, the M.I.X. play  
mode will be canceled.  
AAC  
Sampling rates:  
48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,  
12 kHz, 11.025 kHz, 8 kHz  
Press 1or 2 to select another Folder.  
Bit rates:  
16 - 320 kbps  
This device may not play back correctly depending on sampling rates.  
ID3 tags/WMA tags  
This device supports ID3 tag v1 and v2, and WMA tag.  
If tag data is in an MP3/WMA file, this device can display the title (track  
title), artist name, and album name ID3 tag/WMA tag data.  
This device can only display single-byte alphanumeric characters (up to  
30 for ID3 tags and up to 15 for WMA tags) and the underscore. For  
non-supported characters, “NO SUPPORT” is displayed.  
If information contains characters other than ID3 tag information, the  
audio file may not be played back.  
The tag information may not be correctly displayed, depending on the  
contents.  
14-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Producing MP3/WMA/AAC discs  
Terminology  
MP3/WMA/AAC files are prepared, then written to a CD-R or CD-RW  
using CD-R writing software. A disc can hold up to 509 files/folders  
(including Root Folders), and the maximum number of folders is 255.  
Playback may not be performed if a disc exceeds the limitations  
described above.  
Bit rate  
This is the “sound” compression rate specified for encoding. The higher  
the bit rate, the higher the sound quality, but also the larger the files.  
Media supported  
The media that this device can play back are CD-ROMs, CD-Rs, and  
CD-RWs.  
Sampling rate  
This value shows how many times per second the data is sampled  
(recorded). For example, music CDs use a sampling rate of 44.1 kHz, so  
the sound is sampled (recorded) 44,100 times per second. The higher  
the sampling rate, the higher the sound quality, but also the larger the  
volume of data.  
Corresponding File Systems  
This device supports discs formatted with ISO9660 Level 1 or Level 2.  
Under the ISO9660 standard, there are some restrictions to remember.  
The maximum nested folder depth is 8 (including the root directory).  
The number of characters for a folder/file name is limited.  
Valid characters for folder/file names are letters A-Z (all caps), numbers  
0-9, and ‘_’ (underscore).  
Encoding  
Converting music CDs, WAVE (AIFF) files, and other sound files into the  
specified audio compression format.  
This device also can play back discs in Joliet, Romeo, etc., and other  
standards that conform to ISO9660. However, sometimes the file  
names, folder names, etc., are not displayed correctly.  
Tag  
Song information such as track titles, artist names, album names, etc.,  
written into MP3 files.  
Formats supported  
This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD  
(CD-Extra) and Multi-Session.  
This device cannot correctly play back discs recorded with Track At  
Once or packet writing.  
Root folder  
The root folder (or root directory) is found at the top of the file system.  
The root folder contains all folders and files. It is created automatically  
for all burned discs.  
Order of files  
Files are played back in the order that the writing software writes them  
to the disc. Therefore, the playback order may not be what is expected.  
Verify the writing order in the software’s documentation. The playback  
order of the folders and files is as follows.  
Root folder  
Folder  
MP3/WMA/AAC File  
*
The folder No./ folder Name will not be displayed if no readable file is  
contained in the folder.  
15-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
Turn the Rotary encoder until the desired sound is  
obtained in each mode.  
Sound Setting  
By setting DEFEAT ON, previously adjusted settings of BASS, MID,  
TRE LEVEL and LOUDNESS will return to the factory defaults.  
Rotary encoder/ /ENTER  
Audio Setup  
You can flexibly customize the unit to suit your own preference and  
usage. From the AUDIO SETUP menu, Audio Setting can be modified.  
Use steps 1 to 5 to select the category you wish to modify. For  
details on how to change each setting, see the following  
sections below.  
AUDIO/SETUP  
1
2
Press and hold AUDIOSETUP for at least 2 seconds to  
activate the SETUP mode.  
Turn the Rotary encoder to select AUDIO, and then press  
ENTER.  
AUDIO GENERAL DISPLAY TUNER SIRIUSXM*6 iPod  
BLUETOOTH  
Adjusting Subwoofer Level/Bass Level/  
Middle Level/Treble Level/Balance (Between  
Left and Right)/Fader (Between Front and  
Rear)/Loudness/Defeat  
3
Turn the Rotary encoder to select the desired sound  
setting menu, and then press ENTER.  
(e.g. Select SUBWOOFER)  
1
Press AUDIOSETUP repeatedly to choose the desired  
mode.  
FACTORY EQ*1/*2 LOUDNESS*1/*2 EQ MODE*2/*6  
5BAND P.EQ*2/*3 7BAND G.EQ*2/*4 MX SETTING*2  
3BAND EQ*1 VOL LV ADJ HPF*2 SUBWOOFER   
Each press changes the mode as follows:  
SUBW LPF*5 SUBW PHASE*5 SUBW SYS*5 POWER IC  
SUBWOOFER*1 BASS LEVEL*2 MID LEVEL*2/*4 TRE LEVEL*2  
BALANCE FADER LOUDNESS*2/*3/*4 DEFEAT VOLUME  
SUBWOOFER  
*1 Only for CDE-HD137BT.  
*2 Adjustment cannot be performed when DEFEAT is set to ON.  
*3 Only for CDE-HD138BT.  
*1 When the subwoofer mode is set to OFF, its level cannot be  
adjusted.  
Displayed when EQ MODE is set to 5BAND P.EQ.  
*4 Only for CDE-HD138BT.  
*2 Adjustable only when DEFEAT is OFF.  
*3 For details about loudness, refer to “Turning Loudness On/Off  
Displayed when EQ MODE is set to 7BAND G.EQ.  
*5 These functions are inoperable when Subwoofer is set to OFF.  
*6 Only for CDE-HD138BT.  
*4 Only for CDE-HD137BT.  
4
5
Turn the Rotary encoder to change the setting, and then  
press ENTER.  
(e.g. Select SUBW ON or SUBW OFF)  
Subwoofer  
Bass level  
Middle level  
Treble level  
Balance  
+0 ~ +15  
*4  
*5  
*6  
−7 ~ +7 / −6 ~ +6  
*4  
−7 ~ +7  
*4  
−7 ~ +7 / −6 ~ +6  
Press and hold AUDIOSETUP for at least 2 seconds to  
return to normal mode.  
L15 ~ R15  
R15 ~ F15  
ON/OFF  
ON/OFF  
0 ~ 35  
Fader  
Notes  
Loudness  
Defeat  
Pressing returns to the previous Sound menu mode.  
Pressing and holding for at least 2 seconds will return to normal  
mode.  
Volume  
If no operation is performed for 60 seconds, Sound menu mode is  
canceled.  
*5 Only for CDE-HD138BT.  
Setting value will change according to the level value set in  
*6 Only for CDE-HD138BT.  
Setting value will change according to the level value set in  
BAND5 of P-EQ or BAND7 of G-EQ. Refer to Adjusting the  
Note  
If no operation is performed for 5 seconds, the unit automatically  
returns to normal mode.  
16-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setting the Center Frequency (CENTER FRQ)  
Equalizer Presets (F-EQ)  
(CDE-HD137BT Only)  
3-2 Turn the Rotary encoder to select the desired center  
frequency.  
10 typical equalizer settings are preset at the factory for a variety of  
musical source material.  
BAND1: 63/80/100/200 (63 Hz)  
BAND2: 160/250/400/630/1.0 K (160 Hz)  
BAND3: 630/1.0 K/1.6 K/2.5 K/4.0 K (630 Hz)  
BAND4: 1.6 K/2.5 K/4 K/6.3 K/10.0 K (1.6 KHz)  
BAND5: 10.0 K/12.5 K/16 K/17.5 K (10.0 KHz)  
Setting item: FACTORY EQ  
Setting contents:  
USER / FLAT (Initial setting) / POPS / ROCK / NEWS / JAZZ /  
ELEC DANCE / HIP HOP / EASY LIS / COUNTRY / CLASSICAL  
Setting the Level  
Turning Loudness On/Off  
(CDE-HD137BT Only)  
3-3 Turn the Rotary encoder to select the desired level  
(−6 ~ +6).  
Loudness introduces a special low-and high-frequency emphasis at low  
listening levels. This compensates for the ears decreased sensitivity to  
bass and treble sound.  
4
Repeat steps 1 to 3 to adjust other Bands.  
Notes  
Press to return to the previous step.  
Setting item: LOUDNESS  
The frequency range of adjacent bands should not overlap.  
While adjusting the Parametric EQ, you should consider the frequency  
response of the connected speakers.  
Setting contents:  
OFF (Initial setting) / ON  
Using the Parametric EQ disables the Graphic EQ function.  
Setting EQ mode (CDE-HD138BT Only)  
Adjusting the Graphic Equalizer Curve  
(7BAND G.EQ) (CDE-HD138BT Only)  
This setting gives you a choice of 5-band parametric, or 7-band graphic  
equalizer.  
The Graphic EQ is simpler to set up and use compared to the Parametric  
EQ.  
Setting item: EQ MODE  
You can modify the equalizer settings to create a response curve more  
appealing to your personal taste.  
Setting contents:  
5BAND P.EQ (Initial setting) / 7BAND G.EQ  
5BAND P.EQ:  
1
Turn the Rotary encoder to select the desired band, and  
then press ENTER.  
BAND1 80 BAND2 250 BAND3 500 BAND4 1.0 K   
BAND5 4.0 K BAND6 8.0 K BAND7 16.0 K  
5-band Parametric EQ.  
7BAND G.EQ:  
7-band Graphic EQ.  
Adjusting the Parametric Equalizer Curve  
(5BAND P.EQ) (CDE-HD138BT Only)  
2
3
Turn the Rotary encoder to select the desired level  
(−6 ~ +6), and then press ENTER.  
The Parametric EQ function gives more flexibility than the Graphic EQ  
in covering problem areas in the vehicles response curve.  
You can modify the Equalizer settings to create a response curve more  
appealing to your personal taste.  
Repeat steps 1 to 2 to adjust other Bands.  
Notes  
Press to return to the previous step.  
Using the Graphic EQ disables the Parametric EQ function.  
1
Turn the Rotary encoder to select the Band, and then  
press ENTER.  
BAND1 BAND2 BAND3 BAND4 BAND5  
2
Turn the Rotary encoder to select the desired item, and  
then press ENTER.  
WIDTH (Q) CENTER FRQ LEVEL  
Setting the Bandwidth (WIDTH (Q))  
3-1 Turn the Rotary encoder to select the desired bandwidth.  
WIDE 1 (Initial setting) MEDIUM 2 MEDIUM 3 NARROW 4  
Change the boosted bandwidth to wide or narrow. A wider setting will  
boost a wide range of frequencies above and below the center frequency.  
A narrower setting will boost only frequencies near the center  
frequency.  
17-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
*4 Be applied for other Sub-Program Service channels (Program  
No.3-8) (HD Radio mode).  
*5 Be applied for MP3/WMA/AAC files in disc.  
*6 Be applied for hands-free phone.  
Storing the P.EQ/G.EQ Settings  
(CDE-HD138BT Only)  
The Settings of 5BAND P.EQ/7BAND G.EQ can be stored in the preset  
memory.  
2
Turn the Rotary encoder to select the Media Xpander  
level, and then press ENTER.  
1
When the settings of P.EQ/G.EQ have been completed,  
select any one of the preset buttons (1 through 6) in any  
adjusting item of 5BAND P.EQ/7BAND G.EQ (e.g. BAND),  
press and hold the desired preset buttons for at least 2  
seconds.  
LEVEL OFF LEVEL 1 LEVEL 2 LEVEL 3 CUSTOM  
Customizing the Media Xpander setting  
If CUSTOM is selected in step 2, you can modify the Media Xpander to  
suit your personal preference.  
2
Turn the Rotary encoder to select PROTECT NO/YES, and  
then press ENTER to store the adjusted contents.  
3
Turn the Rotary encoder to select the Band, and then  
press ENTER. BAND1 (Lower frequencies) BAND5  
(Higher Frequencies)  
PROTECT NO PROTECT YES (Initial setting)  
Notes  
BAND1 (Bass) BAND2 (Mid Bass) BAND3 (Mid)   
BAND4 (Mid High) BAND5 (High)  
If YES is selected, the adjusted contents are protected and stored into the  
preset buttons. When you want to store the parameter into a protected  
preset button, “REPLACE NO/YES” can be selected.  
If NO is selected, the preset is stored.  
While performing this operation, all adjusted contents of Parametric  
EQ/Graphic EQ will be stored in the preset buttons.  
The stored contents are not deleted even when resetting the unit or  
disconnecting the battery.  
The stored contents can be recalled by performing operation (refer to  
4
5
Turn the Rotary encoder to select the setting item, and  
then press ENTER.  
HARMONIC LEVEL  
Turn the Rotary encoder to make the setting, and then  
press ENTER.  
*
HARMONIC : LOW/HIGH  
LEVEL: 0 ~ +10  
*
You can adjust the level of harmonic through this setting.  
Recalling the Stored P.EQ/G.EQ  
Adjustment Settings  
(CDE-HD138BT Only)  
6
Repeat steps 3 to 5 to complete the setting of other bands.  
Adjusting the Parametric Equalizer Curve  
(3BAND EQ) (CDE-HD137BT Only)  
The stored Settings of 5BAND P.EQ/7BAND G.EQ that are stored in the  
preset memory.  
You can modify the Equalizer settings to create a response curve more  
appealing to your personal taste. The setting of Bass, Mid and Treble can  
be adjusted in this mode.  
After selecting any adjusting item of 5BAND P.EQ/7BAND  
G.EQ (e.g. BAND), press any one of the preset buttons (1  
through 6) that has your desired characteristic in memory  
to recall the stored settings.  
Setting item: 3BAND EQ  
Further setting items: BASS / MID / TREBLE  
Note  
While performing this operation, all adjustment contents of Parametric  
EQ/Graphic EQ stored in the preset buttons will be recalled, and  
demonstrated automatically.  
Setting the Bass Control  
1
After selecting BASS from the 3BAND EQ adjustment  
mode, turn the Rotary encoder to select the desired item,  
and then press ENTER.  
Setting the Media Xpander mode  
(CDE-HD138BT Only)  
WIDTH (Q) CENTER FRQ LEVEL  
MX (Media Xpander) makes vocals or instruments sound distinct  
regardless of the music source. The FM radio, CD, and iPod, etc. will be  
able to reproduce the music clearly even in cars with a lot of road noise.  
2
3
Turn the Rotary encoder to select the desired setting  
value, and then press ENTER.  
Setting item: MX SETTING  
Press to return to the previous step.  
1
Turn the Rotary encoder to select the source to which you  
want to apply Media Xpander, and then press ENTER.  
Setting the Bass Bandwidth (WIDTH (Q))  
ANALOG TU*1 HD1*2 HD2*3 HD3&OTHER*4 SIRIUSXM  
CD CMPM*5 USB iPod BT AUDIO BT PANDORA  
AUX PHONE HFP*6  
Turn the Rotary encoder to select the desired bass  
bandwidth.  
WIDE 0.50 MEDIUM 1.00 MEDIUM 1.50 NARROW 2.00  
Change the boosted bass bandwidth to wide or narrow. A wider setting  
will boost a wide range of frequencies above and below the center  
frequency. A narrower setting will boost only frequencies near the  
center frequency.  
*1 Be applied for FM radio (analog mode).  
*2 Be applied for the Main-Program Service channel (HD Radio  
mode).  
*3 Be applied for the first Sub-Program Service channel (Program  
No.2) (HD Radio mode).  
18-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Setting the Bass Center Frequency (CENTER FRQ)  
Setting the Treble Bandwidth (WIDTH (Q))  
Turn the Rotary encoder to select the desired bass center  
Turn the Rotary encoder to select the desired treble  
frequency.  
bandwidth.  
60 (Hz) 80 (Hz) 100 (Hz) 120 (Hz)  
WIDE 0.75 NARROW 1.25  
Emphasize the displayed bass frequency ranges.  
Setting the Treble Center Frequency (CENTER FRQ)  
Setting the Bass Level  
Turn the Rotary encoder to select the desired treble  
center frequency.  
7.5 K (Hz) 10.0 K (Hz) 12.5 K (Hz) 15.0 K (Hz)  
Turn the Rotary encoder to select the desired bass level  
(−7 ~ +7) .  
*
You can emphasize or weaken the bass level.  
Setting the Treble Level  
*
The adjustment can also be made by pressing AUDIO. Refer to  
Adjusting Subwoofer Level/Bass Level/Middle Level/Treble Level/  
Turn the Rotary encoder to select the desired treble level  
*
(−7 ~ +7) .  
You can emphasize or weaken the treble level.  
*
The adjustment can also be made by pressing AUDIO. Refer to  
Adjusting Subwoofer Level/Bass Level/Middle Level/Treble Level/  
Setting the Mid Control  
1
After selecting MID from the 3BAND EQ adjustment mode,  
turn the Rotary encoder to select the desired item, and  
then press ENTER.  
Setting the Source Volume Level  
WIDTH (Q) CENTER FRQ LEVEL  
The output level of each source is individually adjustable. For example, if  
the TUNER level sounds lower than CD, its output can be adjusted  
without affecting the other sources.  
The Hands free phone talk level, ring tone level and microphone gain  
level can also be adjusted by using this setting.  
2
3
Turn the Rotary encoder to select the desired setting  
value, and then press ENTER.  
Press to return to the previous step.  
Setting the Mid Bandwidth (WIDTH (Q))  
Setting item: VOL LV ADJ  
*
Turn the Rotary encoder to select the desired Mid  
bandwidth.  
Further setting items: TUNER / SIRIUSXM / DISC / USB / iPod  
/ BT AUDIO / BT PANDORA / AUX / PHONE TALK / RING TONE /  
WIDE 0.75 MEDIUM 1.00 MEDIUM 1.25 NARROW 1.50  
MIC GAIN  
Setting contents:  
−5 dB ~ +5 dB  
Setting the Mid Center Frequency (CENTER FRQ)  
*
Only for CDE-HD138BT.  
Turn the Rotary encoder to select the desired Mid center  
frequency.  
500 (Hz) 1.0 k (Hz) 1.5 k (Hz) 2.5 k (Hz)  
Adjusting the High Pass Filter  
The High Pass Filter on this unit can be adjusted to suit your personal  
taste. This feature works best when used in conjunction with a  
subwoofer.  
Setting the Mid Level  
Turn the Rotary encoder to select the desired Mid level  
*
(−7 ~ +7) .  
Setting item: HPF  
You can emphasize or weaken the Mid level.  
Setting contents:  
HPF OFF (Initial setting) / HPF 60 (Hz) / HPF 80 (Hz) /  
HPF 120 (Hz) / HPF 160 (Hz)  
*
The adjustment can also be made by pressing AUDIO. Refer to  
Adjusting Subwoofer Level/Bass Level/Middle Level/Treble Level/  
All frequencies above the selected cutoff are output.  
Setting the Treble Control  
1
After selecting TREBLE from the 3BAND EQ adjustment  
mode, turn the Rotary encoder to select the desired item,  
and then press ENTER.  
WIDTH (Q) CENTER FRQ LEVEL  
2
3
Turn the Rotary encoder to select the desired setting  
value, and then press ENTER.  
Press to return to the previous step.  
19-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Turning Subwoofer ON/OFF  
External Device  
When the subwoofer is on, you can adjust the subwoofer output level  
Connecting to an External Amplifier (POWER IC)  
When the internal amplifier is not being used, sound quality can be  
improved by turning off its power supply.  
Setting item: SUBWOOFER  
Setting item: POWER IC  
Setting contents:  
SUBW OFF / SUBW ON (Initial setting)  
Setting contents:  
OFF / ON (Initial setting)  
SUBW OFF:  
OFF:  
No subwoofer signal is output from the Subwoofer RCA  
Use this mode when the line output of this unit is used to drive an  
external amplifier. In this setting, the head unit’s internal amplifier  
is turned OFF and cannot drive speakers.  
SUBW ON:  
The subwoofer signal is output from the Subwoofer RCA  
ON:  
The speakers are driven by the built-in amplifier.  
OFF:  
Adjusting the Low Pass Filter  
Front  
Left  
The Low Pass Filter on this unit can be adjusted to suit your personal  
taste.  
Amplifier  
Front  
Right  
Setting item: SUBW LPF  
Rear  
Left  
Setting contents:  
LPF OFF (Initial setting) / LPF 60 (Hz) / LPF 80 (Hz) /  
LPF 120 (Hz) / LPF 160 (Hz)  
Amplifier  
Rear  
Right  
All frequencies lower than the selected cutoff are output.  
ON:  
Setting the Subwoofer Phase  
Speakers  
The subwoofer output phase is toggled between SUBWOOFER  
NORMAL (0°) and SUBWOOFER REVERSE (180°). Depending on the  
installation location of your subwoofer, one of these settings may sound  
better than the other.  
SPEAKER  
RIGHT FRONT  
Front  
Right  
Setting item: SUBW PHASE  
SPEAKER  
RIGHT REAR  
Setting contents:  
NORMAL (Initial setting) / REVERSE  
Rear  
Right  
Setting the Subwoofer System  
SPEAKER  
When the subwoofer is on, you can select either SYS 1 or SYS 2 for the  
desired subwoofer effect.  
Rear  
Left  
LEFT REAR  
Setting item: SUBW SYS  
SPEAKER  
LEFT FRONT  
Setting contents:  
SUBW SYS 1 / SUBW SYS 2 (Initial setting)  
Front  
Left  
SUBW SYS 1:  
Subwoofer level changes according to the main volume setting.  
Note  
SUBW SYS 2:  
No sound is produced by the system when the power output is set to  
OFF.  
Subwoofer level change is different from the main volume setting.  
For example, even at low volume settings, the subwoofer is still  
audible.  
20-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
About the indication display  
Other Functions  
When displaying Text, the following indicators are lit according to the  
mode.  
SOURCE/  
iPod/iPhone  
/BT AUDIO  
Mode  
Indicator/ HD Radio  
Rotary encoder/ /ENTER  
CD Mode  
MP3 Mode  
Mode  
Mode  
Folder  
*2  
Name  
being  
displayed  
Artist  
Name  
being  
Artist  
Name  
being  
Artist  
Name  
being  
*1  
*1  
*1  
VIEW  
BAND  
displayed  
displayed  
displayed  
Text (Disc  
*3  
Album  
Name  
being  
Album  
Name  
being  
*1  
*1  
Name  
being  
)
Displaying the Text  
displayed  
displayed  
displayed  
Song  
Name  
Text ( Track  
*3  
Song  
*1  
Song  
*1  
Text information, such as the disc name and the track name, will be  
displayed if playing a CD text compatible disc. It is also possible to  
display the folder name, the file name and the tag, etc., while playing  
MP3 files.  
*1  
Name  
being  
)
Name /File Name  
Name being being  
being  
displayed  
displayed  
displayed  
displayed  
*1 Tag information:  
Press VIEW k.  
The display will change every time the button is pressed.  
The display in Radio mode*1  
FREQUENCY CLOCK FREQUENCY  
The display in HD Radio mode*2  
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is  
displayed.  
*2 The root folder is displayed as “ROOT”.  
*3 If there is no Text (Disc Name or Track Name), “DISC TEXT”/  
“TRACK TEXT” is displayed.  
:
:
BAND + PRESET NO. + FREQUENCY STATION NAME   
SONG NAME ARTIST NAME PTY CLOCK   
BAND + PRESET NO. + FREQUENCY  
About “Text”  
Text compatible CDs contain text information such as the disc name and  
track name. Such text information is referred to as “text.  
The display in CD mode:  
TRACK NO./ELAPSED TIME TEXT (DISC NAME)*3  
TEXT (TRACK NAME)*3 TRACK NO./CLOCK   
TRACK NO./ELAPSED TIME  
Notes  
Not all characters can be displayed on this device.  
“NO SUPPORT” is displayed if text information is not supported by the  
unit.  
The display in MP3 mode:  
The text or tag information may not be correctly displayed, depending  
on the contents. An unsupported character is replaced with a space.  
FILE NO./ELAPSED TIME FOLDER NO./FILE NO.   
FOLDER NAME FILE NAME ARTIST NAME*4  
ALBUM NAME*4 SONG NAME*4 FILE NO./CLOCK   
FILE NO./ELAPSED TIME  
The display in iPod mode:  
TRACK NO./ELAPSED TIME ARTIST NAME ALBUM NAME   
SONG TITLE TRACK NO./CLOCK TRACK NO./ELAPSED TIME  
The display in BLUETOOTH Audio mode:  
BT A/ELAPSED TIME*5 ARTIST NAME ALBUM NAME   
SONG NAME BT A/CLOCK BT A/ELAPSED TIME  
*1 Only when LISTENMODE is set to ANALOG. For details,  
*2 When LISTENMODE is set to other than ANALOG. For  
*3 Displayed during playback of a disc with CD text.  
*4 ID3 tag/WMA tag  
If an MP3/WMA file contains ID3 tag information, the ID3  
tag/WMA tag information is displayed (e.g. song name, artist  
name, and album name). All other tag data is ignored.  
*5 Depending on the connected mobile phone, the elapsed time  
may not be displayed.  
21-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
iPod mode:  
iPod CONT*7 iPod SET*8 VOL LV ADJ*2 MX SETTING*3  
Using the Front AUX Input Terminal  
BT AUDIO mode:  
BT SET*9 VOL LV ADJ*2 MX SETTING*3  
Connect a portable music player, etc. by simply connecting it to the  
input on the front panel. An optional adapter cable is required (standard  
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).  
Phone mode (Non-calling mode):  
PHONE SET*10 VOL LV ADJ*11 MX SETTING*3  
Phone mode (Calling mode):  
Press SOURCE, and then select the AUXILIARY mode to  
listen to the portable device.  
SPK SWITCH*12 VOICE MUTE*13 CALL WAIT*14  
CALL SOUND*15 END CALL*16 VOL LV ADJ*11  
MX SETTING*3  
Portable player, etc.  
Main unit  
Pandora® mode:  
THMBS UPDN*17 BOOKMARK*18 NEWSTATION*19  
VOL LV ADJ*2 MX SETTING*3  
AUX mode:  
AUX SET*20 VOL LV ADJ*2 MX SETTING*3  
*1 MC SEEK, SEEK TYPE, LISTENMODE, LIVE MODE and FM  
SET can be selected in this mode. For details about these  
*2 You can individually emphasize or weaken the volume level of  
the current source to create your own tonal preference. The  
values set in Option mode and in SETUP mode are linked. Refer  
or  
*3 You can individually set the Media Xpander level of the current  
source to create your own preference. The values set in Option  
mode and in SETUP mode are linked. Refer to “Setting the  
*5 ALERTSETUP, GAME ALERT, P-LOCK and SIGNAL IND can  
be selected in this mode. For details about these settings, refer to  
*6 PLAY MODE can be selected in this mode. For details, refer to  
*8 The setting items are the same as iPod setting in SETUP mode.  
*9 FW VERSION can be selected in this mode. You can see the  
current firmware version about BLUETOOTH by using this  
setting.  
Optional adapter cable (RCA pin  
plugs [red, white] 3.5ø miniplugs)  
or (3.5ø miniplugs).  
Notes  
This function is available only when AUX SETUP is set to ON. For  
Do not connect a Flash Memory Device and an AUX Input Terminal  
connector at the same time.  
Option Menu Setting  
You can quickly adjust the setting items relevant to the current SOURCE  
by using Option Menu.  
*10 CALL SOUND, SENDER ID, PB UPDATE, PB ORDER, AUTO  
ANS, SEV NAME, SPEAKER SL and FW VERSION can be  
selected in this mode. For details about these settings, refer to  
1
Press and hold ENTER/OPTION for at least 2 seconds  
to activate the Option menu of the current source.  
*11 The Hands free phone talk level, ring tone level and microphone  
gain level can be adjusted by using this setting. The setting  
values in Option mode and in SETUP mode are linked. Refer to  
Note  
The option menu varies depending on the source.  
2
3
Turn the Rotary encoder to select the desired item, and  
then press ENTER.  
*12 While calling, the call sound can be switched between the unit  
and mobile phone by using this setting.  
This operation can also be done by pressing BAND. Refer to  
Turn the Rotary encoder to change the setting, and then  
press ENTER.  
After the setting, the display will return to the current source  
automatically.  
*13 While calling, and the Voice Mute is activated, the microphone  
input will mute instantly and “VOICE MUTE” will blink. This  
operation can also be done by pressing . Refer to “Muting  
*14 If there is a waiting call, select this item to display the callers  
Name and waiting number (1 or 2). Press VIEW k and the  
display will switch.  
Setting item:  
HD Radio mode:  
TUNER SET*1 VOL LV ADJ*2 MX SETTING*3  
*16 Select this item to hang up the call.  
SiriusXM mode (CDE-HD138BT Only):  
ALERT MEMO*4 SXM SET*5 VOL LV ADJ*2 MX SETTING*3  
CD mode:  
CD SET*6 VOL LV ADJ*2 MX SETTING*3  
*20 AUX NAME can be selected in this mode. For details, refer to  
MP3/WMA/AAC (Disc) mode:  
CD SET*6 VOL LV ADJ*2 MX SETTING*3  
MP3/WMA/AAC (USB) mode:  
CD SET*6 VOL LV ADJ*2 MX SETTING*3  
22-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5
Press and hold AUDIOSETUP for at least 2 seconds to  
return to normal mode.  
SETUP  
Notes  
Press to return to the previous mode.  
Pressing and holding for at least 2 seconds will return to normal  
mode.  
SOURCE/  
Rotary encoder/ /ENTER  
If no operation is performed for 60 seconds, the unit will return to  
normal mode automatically.  
General Setting  
GENERAL is selected on the setup main menu in step 2.  
Setting the AUX SETUP Mode  
You can input the audio of an external device, (such as a Portable audio  
player) to the AUX connector of this unit.  
AUDIO/SETUP  
Setting item: AUX SETUP  
Setting contents:  
AUX OFF / AUX ON (Initial setting)  
Setting  
AUX OFF:  
When set to OFF, AUX source cannot be selected.  
You can flexibly customize the unit to suit your own preferences and  
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,  
etc., can be modified.  
AUX ON:  
Set to ON when a portable device is connected. If SOURCE is  
pressed and AUX is selected, the sound of the portable device is  
input to the unit.  
Use steps 1 to 5 to select one of the SETUP modes to modify.  
See the applicable section below for details about the  
selected SETUP item.  
Setting the AUX NAME mode  
You can change the AUX NAME display in the SETUP mode.  
1
2
Press and hold AUDIOSETUP for at least 2 seconds to  
activate the SETUP mode.  
Setting item: AUX NAME  
Setting contents:  
AUXILIARY (Initial setting) / TV / DVD / PORTABLE / GAME  
Turn the Rotary encoder to select the desired item, and  
then press ENTER.  
Note  
(e.g. Select GENERAL)  
AUDIO*1 GENERAL DISPLAY TUNER SIRIUSXM*2  
PORTABLE is abbreviated as PMD in the display.  
iPod BLUETOOTH*3  
Playing MP3 Data (PLAY MODE)  
GENERAL:  
CLOCK ADJ*4 AUX SETUP AUX NAME*5 PLAY MODE   
This unit can play back CDs containing both CD and MP3 data (created  
in Enhanced CD (CD Extra) format). However, in some situations,  
playback of an enhanced CD may be difficult. In this case, you can  
choose to play back the CD data session only. When a disc contains both  
CD and MP3 data, playback starts from the CD data portion of the disc.  
DEMO  
DISPLAY:  
DIMMER SCROLL  
TUNER:  
MC SEEK SEEK TYPE LISTENMODE LIVE MODE   
FM SET  
Setting item: PLAY MODE  
SIRIUSXM:  
ALERTSETUP GAME ALERT P-LOCK SIGNAL IND  
iPod:  
Setting contents:  
CD-DA / CDDA/MP3 (Initial setting)  
CD-DA:  
iPod LIST  
Only the CD data in Session 1 can be played back.  
CDDA/MP3:  
*2 Displayed only when a SiriusXM Tuner is connected and the  
current source is Satellite Radio (SIRIUSXM). (CDE-HD138BT  
only)  
CD data, MP3 files in mixed mode, and multi-session discs can be  
played back.  
Note  
*5 Displayed only when AUX SETUP is set to ON.  
Perform this setting before inserting a disc. If a disc has already been  
inserted, remove it first.  
3
4
Select an item with the Rotary encoder, and then press  
ENTER.  
(e.g. Select AUX SETUP)  
Turn the Rotary encoder to change the setting, and then  
press ENTER.  
(e.g. Select AUX ON or AUX OFF)  
23-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Demonstration  
Setting the Seek Type  
This unit has a demonstration feature for the display.  
You can select the seek type between hybrid and digital.  
Setting item: DEMO  
Setting item: SEEK TYPE  
Setting contents:  
Setting contents:  
DEMO OFF (Initial setting) / DEMO ON  
HYBRID (Initial setting) / DIGITAL  
HYBRID:  
Note  
SEEK UP/DOWN is available for digital and analog radio stations.  
However, the strong signals have priority during SEEK.  
To quit Demo mode, set to DEMO OFF.  
DIGITAL:  
Display Setting  
SEEK UP/DOWN is available only for the digital radio station. Any  
analog only stations (or very weak digital) are skipped.  
DISPLAY is selected on the setup main menu in step 2.  
Switching the listening mode  
Dimmer Control  
The unit provides you 4 reception methods, among which you can select  
an optimized method to receive the Digital signal or Analog signal  
according to your own preference and the signal strength.  
Set the Dimmer control to Auto to decrease the illumination brightness  
of the unit with the head lights of the vehicle ON. This mode is useful if  
you feel the units backlighting is too bright at night.  
Setting item: LISTENMODE  
Setting item: DIMMER  
Setting contents:  
HYBRID / DIGITAL / DIGITAL MC (Initial setting) / ANALOG  
Setting contents:  
DIM MANUAL / DIM AUTO (Initial setting)  
HYBRID:  
Receive both digital and analog radio stations. If the digital signal  
is weak, this unit will switch to receive the analog radio signal  
automatically.  
Scroll Setting (SCROLL)  
This CD player can scroll the disc and track names recorded on  
CD-TEXT discs, as well as the text information of MP3 files, folder  
names and tags.  
DIGITAL:  
Keep receiving the digital radio signal, even when the digital  
signal is weak.  
DIGITAL MC:  
Setting item: SCROLL  
Keep receiving the digital radio signal while listening to a  
Multicast Sub-program.  
Setting contents:  
ANALOG:  
OFF / ON (Initial setting)  
Only receive the analog radio signal, even when the digital signal  
is strong.  
OFF:  
The display is scrolled when a disc is loaded or when a track is  
changed, etc.  
Setting the Live mode (LIVE MODE)  
ON:  
The current text information of CD, folder, tag, etc. is scrolled  
automatically.  
While receiving a live broadcast, you can select an optimized receiving  
method according to your own preference and the signal strength.  
Note  
The unit scrolls CD text names, folder names, file names or tag display.  
Setting item: LIVE MODE  
Setting contents:  
ANALOG (Initial setting) / DIGITAL / LISTENMODE  
Tuner Setting  
ANALOG:  
Tuner Setup” is selected on the source setup main menu in step 2.  
While receiving a live broadcast, this unit will only receive the  
analog radio signal even when the digital signal can be received.  
Setting the Multicast Seek  
DIGITAL:  
While receiving a live broadcast, this unit will keep receiving the  
digital radio signal even when the digital signal is weak.  
Multicast Seek can be set to ON/OFF.  
LISTENMODE:  
Setting item: MC SEEK  
While receiving a live broadcast, the setting value is the same as  
Setting contents:  
OFF / ON (Initial setting)  
OFF:  
SEEK is available only for the Main Program Service. Multicast  
stations are ignored.  
ON:  
SEEK finds both the Main Program Service and Sub-program  
Service of Multicast stations.  
24-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Setting the TUNER (FM) tone quality (FM SET)  
Setting the Favorite Sports Team Alerts  
This unit can set your preferred tonal quality for the FM analog radio  
stations.  
This menu option allows you to select your favorite teams, organized by  
leagues, so that you will be alerted later when your favorite teams are  
playing on other channels.  
Setting item: FM SET  
Setting item: GAME ALERT  
Setting contents:  
Setting content:  
HI-FI / NORMAL (Initial setting) / STABLE  
LEAGUE LIST  
HI-FI:  
High-quality setting  
LEAGUE LIST  
After selecting GAME ALERT, a sports league list will be displayed.  
NORMAL:  
Standard setting  
1
Turn the Rotary encoder to select the desired league, and  
then press ENTER.  
STABLE:  
Control noise  
2
Turn the Rotary encoder to select a team you want to store,  
and then press ENTER.  
Note  
A “TEAM SAVED” pop-up screen is followed by an “X U(sed)/Y  
E(mpty).  
X is the total number of Artist/Song/Game alert items stored in  
memory, and Y is the total number of memory slots still  
available for storage.  
Noise may be more noticeable when HI-FI is set, depending on the  
reception status. In this case, the Normal setting is recommended.  
SiriusXM Setting (CDE-HD138BT Only)  
Note  
Select “NONE” on the team list if you do not want to store in  
SIRIUSXM is selected on setup main menu in step 2.  
memory.  
Managing Artist and Song Alerts  
Setting the Parental Control  
The following operations can be performed to change the Alert settings.  
The Artist and Song Alerts feature allows you to mark Artists and Songs  
from the current channel and then the unit alerts you later when the  
marked Artists or Songs are playing on other channels.  
You can lock out channels with passcode protection. Channels that are  
locked cannot be accessed without entering the passcode. You can  
unlock a channel or change the passcode using this menu option.  
Setting item: P-LOCK  
Setting item: ALERTSETUP  
Setting contents:  
CLEAR ALL / LOCKED CH / EDIT CODE  
Setting contents:  
ALERT LIST / ALERT / DELETE ALL  
How to input passcode?  
ALERT LIST  
This menu option allows you to enable the Artist/Song alert for  
individual Artist/Songs (ALERT ON or OFF) or to delete individual  
stored Artist/Song alerts (DELETE).  
1
2
After select P-LOCK, a passcode input screen will be  
displayed.  
1
2
3
Turn the Rotary encoder to select ALERT LIST, and then press  
ENTER.  
Turn the Rotary encoder to select a stored Artist or Song,  
and then press ENTER.  
Turn the Rotary encoder to ALERT to enable (ALERT ON) or  
disable (ALERT OFF) the alert for the selected Artist/Song or  
turn the Rotary encoder to select DELETE to delete the  
selected Artist/Song from memory.  
Input the passcode using the Rotary encoder.  
The initial default 4-digit passcode is set to 0000.  
The passcode is entered one digit at a time with the Rotary  
encoder.  
For example, by turning to clockwise 2 steps, the number 1 is  
selected.  
After entering the digit, it is displayed as “l” (asterisk).  
ALERT  
This menu option allows you to temporarily disable the Artist/  
Song Alerts for all Artists/Songs. When the Alerts are re-enabled,  
individual Artist/Song Alert disabled in the ALERT LIST menu  
setting remain disabled.  
3
4
Press , and then input the next digit of the passcode  
as described in step 2.  
Turn the Rotary encoder to select ALERT ON or OFF, and  
then press ENTER.  
If ON is set, the alert for all stored Artists/Songs is enabled.  
If OFF is set, the alerts for all stored Artists/Songs are disabled.  
Repeat steps 2 to 3 until the 4 digits of the passcode are  
entered, and then press ENTER.  
After the correct passcode is entered, the LOCKED CH/CLEAR  
ALL/EDIT CODE items can be adjusted.  
DELETE ALL  
This operation will delete all alerts (artists, songs and team) stored  
CLEAR ALL:  
Unlock all locked channels.  
in memory.  
After selecting this item,  
Turn the Rotary encoder to select CLEAR YES, and then press  
ENTER.  
Turn the Rotary encoder to select DELETE YES, and then  
press ENTER.  
LOCKED CH:  
After selecting this item, turn the Rotary encoder to select a  
channel from channel list, press ENTER to select to lock or  
unlock the channel. Locked channels cannot be tuned without  
entering the passcode.  
The locked channel will be displayed with “Lbefore channel No.  
EDIT CODE:  
Change the passcode.  
1
Input the old passcode as steps 1 to 4 in “How to input  
passcode?.  
After the old passcode is entered, the new passcode input  
screen will be displayed.  
25-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
2
Input the new passcode as steps 1 to 4 in “How to input  
passcode?.  
A confirm screen (CNFIRM) will be displayed and the new  
passcode must be entered again for confirmation.  
When the passcode is changed successfully, the unit will  
display CODE SAVED.  
BLUETOOTH Operation  
Note  
SOURCE/  
/BT SETUP  
Keep a note of the numbers somewhere safe in case you should  
Rotary encoder/ /ENTER  
forget it.  
Confirming the strength of the SiriusXM signal  
You can check the signal strength through this setting item.  
Setting item: SIGNAL IND  
Setting content:  
SIGNAL IND  
VIEW  
AUDIO/SETUP  
12  
Preset buttons  
(1 through 6)  
BAND  
SIGNAL IND:  
This menu item displays the SiriusXM signal strength as STRONG,  
GOOD, WEAK or NO SIGNAL.  
ABC SKIP  
Note  
If the Signal Indicator reports Weak or No Signal and your vehicle is  
parked outside with no obstructions to the southern sky, then your  
SiriusXM antenna may not be properly installed or may have become  
damaged.  
Setup Before Using  
About BLUETOOTH  
iPod/iPhone Setting  
BLUETOOTH is a wireless technology allowing communication  
between a mobile device or personal computer over short distances.  
This enables a hands-free call or data transmission between  
BLUETOOTH compatible devices. BLUETOOTH transmission is  
available in the unlicensed 2.4 GHz spectrum if the distance between  
devices is within 10 meters. For details, refer to the BLUETOOTH  
Home page (http://www.bluetooth.com).  
“iPod” is selected on the setup main menu in step 2.  
iPod/iPhone Search Mode Setting  
The unit allows you to search for the iPod/iPhone using eight different  
search modes.  
Setting item: iPod LIST  
Notes  
Depending on the BLUETOOTH version, a BLUETOOTH compatible  
device may not be able to communicate with this unit.  
Proper function of this unit with all BLUETOOTH compatible devices  
is not guaranteed. For handling of the BT compatible device, consult  
your ALPINE dealer or ALPINE website.  
Further setting items: PLAYLISTS / ARTISTS /ALBUMS /  
AUDIOBOOKS / PODCASTS / GENRES / COMPOSERS / SONGS  
Setting contents:  
OFF / ON  
Depending on the surroundings, BLUETOOTH wireless connection  
may be unstable.  
Notes  
When the search mode is in Playlists/Artists/Albums/Podcasts/Genres/  
Songs, the initial setting is On, and when the search mode is in  
Audiobooks/Composers, the initial setting is Off.  
When you place a call, or perform setup operations, be sure to stop your  
car in a safe place.  
Depending on the connected BLUETOOTH compatible device(s), the  
function may differ. Also refer to the Owner’s Manual of the connected  
device(s).  
When you search for this unit using the BLUETOOTH compatible  
phone, the unit name is displayed as “Alpine CD Receiver”.  
Before Using BLUETOOTH Function  
Before using the BLUETOOTH function, the following settings need to  
be made.  
Set “HFP, AUDIO” or “BT PANDORA” to ON when you  
®
want to use Hands-Free phone, BT Audio or Pandora  
Note  
Before using BLUETOOTH function, it must be paired with this unit.  
26-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
3
Turn the Rotary encoder to select the desired items, and  
then press ENTER.  
How to connect to a BLUETOOTH  
compatible device (Pairing)  
BLUETOOTH:  
BT IN*1 PAIRED DEV VISIBLE M*1 SEARCH DEV*1  
CALL SOUND*2 SENDER ID*2 PB UPDATE*2 PB ORDER*2  
For details on the control from a BLUETOOTH compatible device, refer  
to the Owners Manual of the BLUETOOTH compatible device.  
AUTO ANS*2 SEV NAME*2 SPEAKER SL*2  
FW VERSION FW UPDATE*1  
Pairing a BLUETOOTH compatible device with  
SSP (Secure Simple Pairing)  
*1 The items are not displayed during a phone call.  
*2 The items are not displayed when “HFP” is set to OFF. Refer  
1
2
Using your BLUETOOTH compatible device, select the  
“Alpine CD Receiver” for pairing.  
4
5
Turn the Rotary encoder to change the settings.  
Turn the Rotary encoder to change the head unit display  
from “PAIR NO” to “PAIR YES, and then press ENTER.  
Press and hold AUDIOSETUP for at least 2 seconds.  
The SETUP mode is canceled.  
If “PAIR NO” is selected, the connection will be canceled.  
Notes  
3
If the pairing was successful, “CONNECTED” is displayed  
for a few seconds. The head unit then returns to its  
previous state.  
Press to return to the previous mode.  
Pressing and holding for at least 2 seconds will return to normal  
mode.  
If no operation is performed for 60 seconds, the unit will return to  
normal mode automatically.  
Pairing a BLUETOOTH compatible device without  
SSP (Secure Simple Pairing)  
Setting the BLUETOOTH Connection  
(BT IN)  
1
2
Using your BLUETOOTH compatible device, select the  
“Alpine CD Receiver” for pairing.  
With BLUETOOTH technology, you can place a hands-free call by a  
BLUETOOTH-equipped mobile phone.  
Audio information of a BLUETOOTH compatible mobile phone, a  
portable audio player, etc., is controllable/playable wirelessly from this  
unit.  
Pandora internet radio on a BLUETOOTH compatible smartphone  
(which runs Android OS or BlackBerry OS) is controllable/playable  
wirelessly from this unit.  
Input the PIN code (“0000”) in a BLUETOOTH compatible  
device.  
Note  
®
The PIN code is fixed as “0000”.  
3
If the pairing was successful, “CONNECTED” is displayed  
for a few seconds. The head unit then returns to its  
previous state.  
Setting item: BT IN  
Notes  
Further setting items: HFP / AUDIO / BT PANDORA  
If the connection is unsuccessful, “FAILED” is displayed.  
After a successful pairing, the two devices should re-pair automatically  
whenever the vehicle’s ignition is turned ON.  
Setting contents:  
OFF / ON (Initial setting)  
Set “VISIBLE M” to VISI M ON to enable this unit to be recognized by  
a BLUETOOTH compatible device, refer to “Setting the Visible Mode”  
You can also manually pair the BLUETOOTH devices from this unit.  
Hands-Free Phone setting (HFP)  
ON:  
Select when you want to pair your BLUETOOTH compatible phone  
with this unit.  
OFF:  
Hands-Free Phone function is not used.  
Note  
BLUETOOTH Setup  
When HFP is set to OFF, the indicators related to Hands-free phone  
(c battery charge, i signal strength and h message) will not be  
displayed.  
The following steps 1 to 5 are common to the various BLUETOOTH  
functions. For details, refer to each individual function.  
BLUETOOTH Audio setting (AUDIO)  
Note  
ON:  
Set “HFP”, “AUDIO” or “BT PANDORA” to ON, and then perform  
BLUETOOTH SETUP operation. Refer to “Setting the BLUETOOTH  
Select when you want to use BLUETOOTH Audio function or  
Pandora®  
.
OFF:  
BLUETOOTH Audio function or Pandora® is not used.  
1
2
Press and hold AUDIOSETUP for at least 2 seconds to  
activate the SETUP mode.  
Turn the Rotary encoder to select “BLUETOOTH, and then  
press ENTER.  
The BLUETOOTH setup mode is activated.  
Note  
The BLUETOOTH setup mode can also be activated by pressing and  
holding BT SETUP for at least 2 seconds.  
27-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
BLUETOOTH Pandora® setting (BT PANDORA)  
Pairing a BLUETOOTH Device from the  
unit  
ON:  
Select when you want to use BLUETOOTH Pandora® function.  
OFF:  
If your BLUETOOTH device is not immediately pairing, the head unit  
can perform a search. The search can find paired or unpaired devices.  
BT Pandora® function is not used.  
Note  
Setting item: SEARCH DEV  
BT PANDORA setting item is adjustable only when AUDIO is set to  
ON.  
1
When SEARCH DEV is selected, and “SEARCHING” is  
displayed, the search gets started.  
Setting the BLUETOOTH Device  
Note  
Select one of 3 connected BLUETOOTH compatible devices that you  
previously registered.  
The “SEARCHING” operation can be stopped by pressing .  
2
3
Turn the Rotary encoder to select the name of the device  
to be connected from the Device Search list, and then  
press ENTER.  
Setting item: PAIRED DEV  
1
Turn the Rotary encoder to select a BLUETOOTH  
compatible device you want to use (you want to change  
connection), and then press ENTER.  
If this unit is successfully connected to a BLUETOOTH  
compatible device, “CONNECTED” is displayed, and then  
the unit returns to normal mode.  
2
Turn the Rotary encoder to select “CONNECT” to connect  
the selected device.  
Depending on the mobile phone, it may be necessary to input a  
passcode. In this case, “CODE 0000” is displayed. Input the  
passcode “0000” in the BLUETOOTH compatible device to make  
the pairing. After the pairing is completed, the unit will  
automatically connect to the BLUETOOTH compatible device. If  
you input the wrong passcode or the communication fails,  
“FAILED” is displayed.  
The connected device is marked with “l. Select “DISCONNECT”  
to disconnect this device. Select “CLEAR” when you want to clear  
the device from the device list.  
Notes  
If the connection is successfully changed, “CONNECTED” is displayed  
for 2 seconds and the indicator lights up, then the display returns to  
the SETUP screen.  
Setting the BLUETOOTH sound quality  
If a mobile phone is connected to this unit successfully, the c  
indicator lights up to show the battery charge of the connected mobile  
phone. The j indicator lights up when the battery charge is about  
50%, and it blinks as a low level warning.  
Change these settings to improve the quality of the outgoing or  
incoming call.  
Indicator i (Signal Strength):  
Setting item: CALL SOUND  
The indicator will display the current signal strength of your service  
provider. The indicator blinks when the signal of the connected mobile  
phone is weak.  
Further setting items: VOL LV ADJ / TYPE SET  
Depending on the connected mobile phone, the c (battery charge),  
i (signal strength) and h (message) indicators may not be displayed.  
If 3 devices have been registered, you cannot register a 4th device. To  
register another device, you need to delete one of the other devices first.  
Adjusting the volume (VOL LV ADJ)  
You can emphasize or weaken the volume level of the Phone call, the  
ring tone and the microphone input to fit your own preferences.  
Setting contents:  
Setting the Visible Mode  
PHONE TALK:  
−5 dB ~ +5 dB  
RING TONE:  
−5 dB ~ +5 dB  
You can set whether this unit can be recognized or not from a  
BLUETOOTH compatible device. Normally set this to VISI M ON.  
MIC GAIN:  
Setting item: VISIBLE M  
−5 dB ~ +5 dB  
Setting contents:  
VISI M OFF / VISI M ON (Initial setting)  
Note  
These setting items are the same as PHONE TALK, RING TONE and  
MIC GAIN settings in AUDIO step mode, refer to “Setting the Source  
VISI M OFF:  
Disable recognition of this unit from the BLUETOOTH compatible  
device.  
VISI M ON:  
Enable recognition of this unit from the BLUETOOTH compatible  
device.  
28-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Sound Type setting (TYPE SET)  
Phone Book Auto Update ON/OFF  
You can set whether to update the phone book automatically.  
Setting item: PB UPDATE  
Depending on your calling environment, choose one of the settings  
below which gives the best sound quality.  
Setting contents:  
TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5  
Setting contents:  
OFF / ON (Initial setting)  
TYPE1:  
Standard Mode (recommended)  
OFF:  
TYPE2:  
Enhance the noise reduction  
The phone book will not update.  
ON:  
TYPE3:  
When the mobile phone reconnects with this unit, the phone  
book will update.  
Enhance the echo-cancel  
TYPE4:  
Enhance both noise reduction and echo-cancel  
Changing the Phone book List Order  
TYPE5:  
Weaken both noise reduction and echo-cancel  
The phone book is listed alphabetically by the first letter of FIRST or  
LAST NAME.  
Listing by FIRST NAME is the default but LAST NAME can be selected.  
Note  
The functions below are designed to improve the sound quality of the  
outgoing call.  
Noise reduction: This function can reduce the road noise, but excessive  
enhancement may affect the sound quality of the call.  
Echo-cancel: This function can reduce the echo, but excessive  
enhancement may affect the sound quality of the call.  
Setting item: PB ORDER  
Setting contents:  
FIRST NAME (Initial setting) / LAST NAME  
Note  
Setting the caller information display/  
text message indicator ON/OFF  
WAITING” will be displayed while the Phone book order is switching.  
You can quit the “WAITING” screen to perform other operations by  
pressing when the ordering is still in progress. At this time, the  
phone book is not accessible. In addition, the ordering may affect the  
playback of BT AUDIO.  
You can choose whether to use these functions according to the  
following setting.  
Setting item: SENDER ID  
Setting the Received Calls automatically  
(Auto Answer)  
Further setting items: MSG ALERT / CALLER ID  
Setting contents:  
OFF / ON (Initial setting)  
When a call is received, you can set whether to receive it automatically  
or not.  
Setting text message indicator ON/OFF (MSG  
ALERT)  
Setting item: AUTO ANS  
Setting contents:  
AT ANS OFF (Initial setting) / AT ANS ON  
When it is set to ON, the h indicator blinks for 30 seconds while  
receiving a text message. The h indicator remains on if there is an  
unread text message on the connected mobile phone.  
AT ANS OFF:  
When a call is received, it is not answered automatically. Press f  
to receive the call.  
Notes  
AT ANS ON:  
Depending on the mobile phone, this function may not be performed.  
The text of the message will not be displayed on this unit.  
When this unit prompts you of a received text message, it is  
recommended to read the message after stopping your car in a safe  
place, rather than read it immediately through your phone.  
When a call is received, it is answered automatically after about 5  
seconds.  
Note  
If the received call setting on the mobile phone is on, the call will be  
answered automatically even though this setting is set to OFF.  
Setting the caller information display ON/OFF  
(CALLER ID)  
Displaying the phone service provider  
name  
If you want to keep the ID information of the caller from others, set this  
item to OFF. Depending on the stored ID information, while you are  
dialing a number, only telephone number will be displayed or telephone  
name will be displayed as “ID UNSENT”; During a call, “NO NAME”  
will be displayed; Or while a call is dialing in, only telephone number  
will be displayed or telephone name will be displayed as “NO NAME.  
The service provider name of the connected BLUETOOTH compatible  
device will be displayed. If a BLUETOOTH compatible device is not  
connected, “ID UNSENT” will be displayed.  
Setting item: SEV NAME  
Note  
Depending on the character type some phone service provider names  
cannot be displayed. “ID UNSENT” will be displayed.  
29-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Selecting the output speaker  
Choose the speaker in your vehicle from which you want to hear the call.  
Setting item: SPEAKER SL  
Answering a Call  
Incoming calls are announced by the received call ring tone and a  
displayed message (PHONE).  
Press f.  
Setting contents:  
ALL (Initial setting) / FRONT-L / FRONT-R / FRONT-LR  
The call starts.  
ALL:  
Notes  
The sound be output from all of speakers in car.  
When “AUTO ANS” is set to AT ANS ON, you can receive a call  
While calling, the source sound on the unit is muted. After calling,  
playback will resume.  
FRONT-L:  
The sound only be output from the front left speaker.  
FRONT-R:  
The sound only be output from the front right speaker.  
FRONT-LR:  
The sound be output from the front left and front right speaker.  
Hanging up the Telephone  
Displaying the firmware version  
The current firmware version will be displayed.  
Setting item: FW VERSION  
Press f.  
The call finishes.  
Note  
You can also hang up the call by pressing and holding for at least 2  
seconds.  
Updating the firmware  
Calling  
Future BLUETOOTH firmware updates may become available for  
phone interoperability.  
For information to update your BLUETOOTH firmware, please visit  
Alpine America home page (http://www.alpine-usa.com).  
Call History is recorded for the last dialed/received/missed calls (80  
records for each). There are various ways of making calls based on the  
“Calling. The following steps 1 to 5 are common to the various ways of  
making these calls. For details, refer to each individual category for  
making calls.  
Setting item: FW UPDATE  
Setting contents:  
UPDATE NO (Initial setting) / UPDATE YES  
1
2
Press f.  
The outgoing method list is displayed.  
Turn the Rotary encoder to select the outgoing mode.  
Hands-Free Phone Control  
Setting contents:  
VOICE DIAL / DIALED / RECEIVED / MISSED /  
PHONE BOOK  
About the Hands-Free Phone  
VOICE DIAL:  
Voice dial operation  
Hands-free calls are possible when using a HSP (Head Set Profile) and  
HFP (Hands-Free Profile) compatible mobile phone with this unit.  
DIALED:  
Dialed history  
Notes  
RECEIVED:  
Received history  
Avoid performing a hands-free call in heavy traffic or on narrow or  
winding streets.  
MISSED:  
Missed incoming history  
Close the windows while calling to reduce background noise.  
If both calling parties are using hands-free devices, or the call is made in  
a noisy location, difficulty hearing the other person’s voice is normal.  
Depending on telephone line conditions or certain mobile devices used,  
voices may sound unnatural.  
PHONE BOOK:  
Mobile phone book  
3
4
Press ENTER.  
The outgoing mode is activated, and each mode list is displayed.  
When using a microphone, speak as directly as you can into the  
microphone to pick up the best sound quality.  
Certain mobile phone features are dependent on the capabilities and  
settings of your service provider’s network. Additionally, certain features  
may not be activated by your service provider, and/or the provider’s  
network settings may limit the feature’s functionality.  
Always contact your service provider about feature availability and  
functionality.  
Note  
It may take some time for the list to be displayed, and also directly after  
connection, the list may not be brought up to date.  
Turn the Rotary encoder to select a name or a telephone  
number from the list.  
All features, functionality, and other product specifications, as well as  
the information contained in the Owner’s Manual are based upon the  
latest available information and are believed to be accurate at the time  
of printing.  
Alpine reserves the right to change or modify any information or  
specifications without notice or obligation.  
Note  
You can use Phone book alphabet search function to search a name or  
number from Phone Book. For details, refer to “Phone book alphabet  
30-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
5
Press ENTER.  
The selected telephone number will be called.  
If one name has several numbers registered in the telephone  
book, press ENTER after selecting the name , then turn the  
Rotary encoder to choose the desired number and press  
ENTER, the telephone will be called. Press and hold  
ENTER for at least 2 seconds after selecting the name, the  
default number of the name will be called. Depending on the  
connected mobile phone, this function may not be performed.  
Dialing a Number In The Phone Book  
Up to 1,000 names (at most 5 telephone numbers for each name) are  
downloadable from a mobile phone. Dial a call by selecting a person  
from the phone book list.  
*
Setting item: PHONE BOOK  
Notes  
The order of the list display depends on the setting of “PB ORDER”  
If the call history or phone book of the mobile phone is added or deleted  
while it is connected to the unit, the list displayed on the unit may not  
be brought up to date. If it is not updated, you cannot correctly place a  
call.  
*
If the name cannot be recognized, default number will be  
displayed.  
Notes  
Press to return to the previous mode.  
If no operation is performed for 60 seconds, the unit will return to  
normal mode automatically.  
The names registered in the telephone book are displayed. If the name is  
not registered, a number is displayed. If both name and number cannot  
be displayed, “ID UNSENT” will be displayed.  
If you place a call directly from the paired mobile phone, the phone  
number is not displayed, you cannot redial from the unit in this case.  
You can display the information of a number stored in phone book by  
pressing VIEW k. Each press changes the display as Name   
*
Telephone NO. Telephone label Name  
If the information can not be obtained, “NO NAME”,“NO NUMBER”  
or “NO LABEL” will be displayed.  
*
The telephone label of a number depends on the number information  
stored in Phone book of the mobile phone, which includes 5  
types-GENERAL, MOBILE, HOME, OFFICE and OTHER.  
Voice Dial Operation  
Phone book alphabet search function  
You can make a call using voice commands.  
You can select the first three letters to search for a desired name in  
phone book list by using the Phone book alphabet search function.  
Setting item: VOICE DIAL  
For example:  
Searching a name “Michael James”  
The following example explains how the search is performed.  
Depending on the setting in PB ORDER (refer to “Changing the Phone  
book List Order” on page 29), the phone book is listed in first name or  
last name order. Please search for the first name or last name according  
to the setting.  
When the VOICE DIAL mode is activated, “SPEAK” is  
displayed. Say the telephone number*, name* you want  
to call into the microphone.  
*
This message depends on the voice tag prestored in the mobile  
phone.  
Notes  
You can perform this operation only when a voice dial compatible  
mobile phone is connected. If the mobile phone is not compatible with  
the voice dial, “NO SUPPORT” is displayed for 2 seconds.  
The Voice Dial function performance depends on the recognition range  
of the mobile phone and mounting location of the microphone. Please  
pay attention when the microphone is mounted.  
Voice dial operation depends on the function of the mobile phone. For  
details, refer to the Owners Manual of the mobile phone.  
If a called person that you say is not found, “NO CALL” is displayed for  
2 seconds.  
1
2
3
4
Press ABC SKIP while in the phone book list, the phone  
book alphabet search mode is activated.  
The letter selection list is displayed.  
Turn the Rotary encoder to select the first letter (e.g. M),  
and then press .  
The letter selection list is displayed.  
Turn the Rotary encoder to select the second letter (e.g. I),  
and then press .  
If the voice is not detected or recognized by microphone within 30  
seconds, “NO CALL” will be displayed for 2 seconds, and then the unit  
returns to the normal mode automatically.  
The letter selection list is displayed.  
Turn the Rotary encoder to select the third letter (e.g. C),  
and then press ENTER.  
The names stored in phone book which begin with “MIC” are  
searched.  
Redialing a Number In Outgoing History  
Previously dialed telephone numbers are stored in dialed calls history.  
You can redial a number by searching from dialed calls history.  
Setting item: DIALED  
5
Turn the Rotary encoder to select the desired name (e.g.  
Michael James), and then press ENTER to make the  
call.  
Dialing a Number In Incoming History  
Telephone numbers from received calls are stored in the Received List.  
You can redial these numbers by searching here.  
Notes  
This function is applied for letters A-Z.  
If the selected name has several numbers registered in phone book, you  
need to turn the Rotary encoder to select the desired number, and  
then press ENTER.  
Setting item: RECEIVED  
Press in step 3 or 4 to delete the current entry and return to the  
previous step.  
Dialing a Number In Incoming Missed Call  
History  
You can search for a name by its first letter, first two letters or first three  
letters. Press ENTER after entering the desired number of letters. A  
list displays the names beginning with the entered letter(s).  
Telephone numbers for received calls that are missed, are stored in the  
Missed List. You can redial these numbers by searching here.  
Setting item: MISSED  
31-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Call waiting function  
Adjusting the volume when receiving a  
Call  
If a second call is received during a current call, you can have the first  
caller wait momentarily while you take the second call. When you are  
finished with one call, you can switch to the other one.  
While calling, you can adjust the volume.  
Turn the Rotary encoder to adjust the volume.  
If a second call is received during the current call (call1),  
the information of second caller (call2) is displayed  
instead of the current caller’s name. Press 2, the call  
waiting mode is activated.  
Note  
You may need to increase volume from your regular audio listening  
source level. However, increasing the volume excessively may result in  
feedback. Feedback is directly related to the volume. Turning down the  
volume as low as acceptable, will reduce it. Positioning the microphone  
in a direction away from the main car speakers (e.g. clipped on sun  
visor) may also reduce feedback at high volume.  
In this case, call1 is on hold, while you take call2.  
Notes  
In the call waiting mode, press 1 or 2 to switch between the current  
call and the person on hold.  
Muting the microphone input quickly  
(Voice Mute)  
In the call waiting mode, press and hold 1 or 2 for at least 2  
seconds to hang up call1 or call2, and the other call will be answered  
automatically.  
In the call waiting mode, you can press VIEW k to change the display  
between waiting number (1 or 2) and caller name.  
While calling, activating the Voice Mute function will instantly mute the  
microphone input. Your voice will not be heard by the caller.  
Preset a number in the Phone Book  
(Shortcut dial)  
While calling, press to mute the microphone input.  
Press again will bring the microphone input back to its  
previous volume level.  
Assign numbers that you dial frequently to presets for quick recall. You  
can assign up to six frequently called phone numbers to number presets.  
Note  
The operation can also be performed in the option menu of phone mode  
Select a number you want to preset from the Phone Book.  
Press and hold (for at least 2 seconds) any one of the  
preset buttons (1 through 6) into which you wish to store  
the number.  
Call Switching Operation  
While making a call, this function allows you to initiate the transfer of  
the audio between the mobile phone and the speakers in the car.  
The phone number you selected is stored in the selected preset.  
Notes  
While calling, press BAND to switch the call sound  
between the unit and mobile phone.  
If the name has several numbers registered in the phone book, press  
ENTER after selecting the name. Turn the Rotary encoder to  
choose the desired number. Press and hold any one of the preset  
buttons (1 through 6) for at least 2 seconds. The selected number is  
stored as a preset number.  
Notes  
Depending on the mobile phone, this operation may not be performed.  
The operation can also be performed in the option menu of phone mode  
A total of 18 phone numbers can be stored in the preset memory (6  
numbers for each mobile phone in the paired device list.) If a mobile  
phone is deleted from the paired device list, the stored preset numbers of  
this mobile phone are deleted, even when it is paired again.  
If you store a phone number in a preset with a previously stored  
number, the current number will be cleared and replaced by the new  
one.  
Dialing the preset number  
1
2
Press any one of the preset buttons (1 through 6) that has  
had a number stored in the phone mode.  
The information (name/number) stored in the preset station is  
displayed.  
Press ENTER or f.  
The stored preset number is dialed directly.  
32-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Pandora® internet radio  
(optional)  
BLUETOOTH Audio Operation  
Audio information of a BLUETOOTH compatible mobile phone, a  
portable player, etc., is controllable/playable wirelessly from this unit.  
*
*
To play back audio, a mobile phone or a portable player conforming to  
A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/  
Video Remote Control Profile) is required.  
SOURCE/  
Not all functions work with all devices.  
Rotary encoder/ /ENTER  
Notes  
Set “AUDIO” to ON when you want to use BLUETOOTH Audio  
During a call, sound on the BLUETOOTH audio source is muted.  
If you operate the Hands-free phone (e.g. searching in the phonebook)  
while using the BLUETOOTH Audio function, BLUETOOTH Audio  
playback may be affected.  
3
4
Recalling the BLUETOOTH Audio Mode  
Press SOURCE/to select the BT AUDIO mode.  
Selecting the desired Song  
VIEW  
Preset buttons  
(1 through 6)  
®
Pandora internet radio is your own FREE personalized radio now  
available to stream music on your smartphone (which runs Android OS  
or BlackBerry OS).  
Just start with the name of one of your favorite artists, songs or classical  
®
Press .  
composers and Pandora will create a “station” that plays their music  
Return the beginning of the song being played back.  
and more music like it.  
The CDE-HD138BT/CDE-HD137BT enables you to interact with your  
Pandora account by connecting a smartphone that has the latest  
version of the Pandora application installed.  
®
Press .  
®
Forward the next song.  
Pressing and holding or will fast backward/fast  
forward track continuously.  
Notes  
®
Some Pandora application functions are not available when using the  
CDE-HD138BT/CDE-HD137BT.  
®
Pausing  
Pandora via Bluetooth is not available on the iPhone.  
®
Pandora is available on Android OS and BlackBerry OS with this  
®
unit—not all smartphones will be able to run Pandora via Bluetooth.  
Press .  
A playback stops. Pressing again will resume a playback.  
Listening to Pandora®  
1
Pair the smartphone with this unit.  
Note  
Before pairing, make sure AUDIO is set to ON, refer to “Setting the  
2
Press SOURCE to switch to the BT PANDORA mode.  
Note  
The Pandora® source can be displayed only when BT PANDORA is set  
3
4
To pause playback, press .  
Pressing again will resume playback.  
To skip to the next song, press .  
33-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Search by Date Added:  
Notes  
The operation to replay a previous song is not available.  
®
1
2
Press ENTER to activate the Search mode.  
Pandora limits the number of skips allowed on their service. If you  
attempt to skip songs beyond the limit, “SKIP LIMIT” is displayed.  
CDE-HD138BT/CDE-HD137BT remembers the source just before  
Turn the Rotary encoder to select “BY DATE, and then  
press ENTER.  
The “By Date” search mode is activated and the station names  
are listed by the date they were added to the account.  
®
turning off the power. If Pandora is the last SOURCE to be played, it  
will appear as the SOURCE the next time the unit is power up even if  
the app is not launched on your smartphone.  
®
Pandora audio could drop out in areas with poor phone coverage.  
The display content varies when ads are received.  
The playback time may not be correctly displayed.  
3
Turn the Rotary encoder to select the desired station, and  
then press ENTER.  
®
Pandora will play that station.  
Note  
If any one of the preset buttons (1 through 6) is pressed in the  
“Thumbs” Feedback  
search mode, a search can be made quickly by skipping the specified  
number of channels. For details, refer to “Direct Search Function” on  
You can personalize your stations with “Thumbs Up” or “Thumbs  
Down” feedback, which the system takes into account for future music  
selections.  
During playback, press u or d for thumbs up or thumbs  
down.  
QuickMix  
®
u: “THUMBS UP” is displayed for 2 seconds. Pandora will  
Use QuickMix to create a playlist based on two or more of your  
®
add similar music to your station.  
Pandora stations.  
®
d: “THUMBS DN” is displayed for 2 seconds. Pandora will  
1
2
Press ENTER to activate the Search mode.  
ban that song from your station, and the current song is  
skipped. If the number of skips allowed has reached its  
limit, the current song continues to play back.  
Turn the Rotary encoder to select “A-Z” or “BY DATE, and  
then press ENTER.  
Note  
The “A-Z” or “By Date” search mode is activated and the station  
name is displayed.  
In some situations, “Thumbs” feedback may not be available.  
3
Press ENTER while selecting “QUICKMIX.  
Searching for a Desired Station  
Notes  
The songs from the created stations are played back in random  
sequence.  
You can display your station list and select stations directly from the  
CDE-HD138BT/CDE-HD137BT.  
Select another station during search mode to cancel QuickMix.  
Alphabet Search:  
Bookmarking a Desired Song or Artist  
1
2
Press ENTER to activate the Search mode.  
The currently playing track or artist can be bookmarked and saved to  
Turn the Rotary encoder to select “A-Z, and then press  
ENTER.  
®
your Pandora account.  
The “A-Z” search mode is activated and the station names are  
listed alphabetically.  
1
2
During playback, press 3b (Bookmarks).  
The Pandora Bookmark screen is displayed.  
®
3
Turn the Rotary encoder to select the desired station, and  
then press ENTER.  
Turn the Rotary encoder to select “TRACK (Bookmark)” or  
“ARTIST (Bookmark), and then press ENTER.  
The current track or artist is bookmarked. “BMK TRACK” or “BMK  
ARTIST” is displayed.  
®
Pandora will play that station.  
Notes  
Your bookmarks can be viewed on your “Profile” page at  
In some situations, bookmarks may not be available.  
When the Bookmark operation is failed, BMK N/A is displayed.  
34-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Creating a New Station  
Flash Memory (optional)  
Based on currently playing track or artist, you can create a new station  
®
and save to your Pandora account.  
SOURCE/  
1
2
During playback, press n 4 (New Station).  
The Pandora New Station screen is displayed.  
®
Turn the Rotary encoder to select “TRACK” or “ARTIST,  
and then press ENTER.  
A “NEW TRACK” or “NEW ARTIST” pop-up screen.  
A New Station based on current track or artist is created.  
Notes  
Your New Station can be viewed on your “Profile” page at  
In some situations, creating a new station function may not be  
available.  
If this operation fails, N/A is displayed.  
About media that can be played  
The following table shows which media can be played on which models.  
MP3  
WMA  
AAC  
CDE-HD137BT  
CDE-HD138BT  
Search Position Memory  
During playback, you can quickly return to the last-selected hierarchy  
level in the search mode.  
Playing MP3/WMA/AAC Files from Flash  
Memory (optional)  
Press .  
The hierarchy you selected last in the search mode is displayed.  
If you connect a Flash Memory Device containing MP3/WMA/AAC,  
MP3/WMA/AAC files can be played back.  
Changing the Display  
1
2
Press SOURCE to switch to the USB AUDIO mode.  
Press VIEW k.  
To pause playback, press .  
Pressing again will resume the playback.  
*
*
Station Name  
Song Title  
Elapsed Time  
Album Name  
Elapsed Time  
Artist Name  
Clock  
Notes  
*
*
The root folder is displayed as “ROOT” in the Folder Name Search  
mode.  
This unit plays back files in Flash Memory with the same controls and  
modes as playback of CDs containing MP3/WMA/AAC. For details,  
Before disconnecting Flash Memory, be sure to change to another source  
or set to pause.  
The playback time may not be correctly displayed when a VBR  
(Variable Bit Rate) recorded file is played back.  
*
TAG information  
If there is no text information, nothing will be displayed.  
Notes  
Only alphanumeric characters can be displayed.  
The maximum number of characters is 60 (60 byte).  
Some characters may not be correctly displayed.  
35-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Flash Memory Connection (optional)  
iPod/iPhone (optional)  
Connect Flash Memory  
SOURCE/  
Rotary encoder/ /ENTER  
1
2
Open the cover of the USB Port.  
Connect the Flash Memory directly to the USB Port, or via  
the USB cable.  
This unit  
USB Connection Terminal  
Flash Memory  
(sold separately)  
12  
4
5
ABC SKIP  
or  
Preset buttons  
(1 through 6)  
Connecting an iPod/iPhone  
Flash Memory  
(sold separately)  
Cable (sold  
separately)  
An iPod/iPhone can be connected to this unit by using the Interface  
cable for iPod (included with iPod). When an iPod/iPhone is connected  
to this unit, you can choose to control the iPod/iPhone using its own  
controls or by the head unit controls. For details, refer to “Setting the  
Remove Flash Memory  
1
2
Carefully, pull out the Flash Memory Device from the USB  
cable or the USB Port.  
This unit  
USB Connection Terminal  
Close the cover of the USB Port.  
Notes  
Change to a source other than the Flash Memory mode, and then  
remove the Flash Memory Device. If Flash Memory is removed while its  
contents are playing, data may be damaged.  
When removing Flash Memory, pull it out straight.  
If sound is not output or Flash Memory is not recognized even when  
connected, remove the Flash Memory Device once, and then reconnect.  
After removing the Flash Memory, close the cover of the USB Port to  
prevent dust or foreign objects from entering and causing a  
malfunction.  
iPod/iPhone  
(sold separately)  
Included with iPod/iPhone  
About MP3/WMA/AAC File of Flash Memory  
Notes  
An iPhone connected to this unit operates as an iPod. The iPhone can  
be used as a hands-free device using the integrated Bluetooth module.  
Internet and telephone functions of iPod touch or iPhone, etc., can also  
be used when connecting to the unit. However, using these functions  
will stop or pause the playing songs, at this time do not operate the unit  
to avoid a malfunction.  
Playing back MP3/WMA/AAC  
MP3 files are prepared, and then stored to a Flash Memory Device. This  
unit can recognize at most 100 folders and 100 files per folder stored in  
Flash Memory. Playback may not be performed if a Flash Memory  
Device exceeds the limitations described above.  
Do not make a file’s playback time more than 1 hour.  
About iPod/iPhone models usable with this unit  
Media supported  
Only MP3/WMA/AAC files are supported. Other media types are  
ignored.  
Confirmed devices regarding Made for iPod. Correct function of  
earlier versions cannot be guaranteed.  
iPod touch (4th generation): Ver.4.3  
iPod nano (6th generation): Ver.1.0.0  
iPod touch (3rd generation): Ver.4.3  
iPod nano (5th generation): Ver.1.0.2  
iPod classic (160 GB) (Late 2009): Ver.2.0.4  
iPod touch (2nd generation): Ver.4.2.1  
iPod nano (4th generation): Ver.1.0.4  
iPod classic (120 GB): Ver.2.0.1  
Corresponding File Systems  
This device supports FAT 12/16/32 for Flash Memory formats.  
iPod touch (1st generation): Ver.3.1.3  
iPod nano (3rd generation): Ver.1.1.3  
iPod classic (80 GB, 160 GB): Ver.1.1.2  
iPod nano (2nd generation): Ver.1.1.3  
36-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
iPod with video: Ver.1.3  
iPod nano (1st generation): Ver.1.3.1  
Confirmed devices regarding Made for iPhone. Correct function of  
earlier versions cannot be guaranteed.  
iPhone 4: Ver.4.2.1  
Searching for a desired Song  
An iPod/iPhone can contain thousands of songs. The unit for this reason  
can make various searches using the search function as shown below.  
Each music category has its own individual hierarchy. Use the Playlist/  
Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode  
to narrow searches based on the table below.  
iPhone 3GS: Ver.4.3  
iPhone 3G: Ver.4.2.1  
iPhone: Ver.3.1.3  
For clarity in identifying your model of iPod, please see Apples own  
document “Identifying iPod models” at  
This unit does not support video playback from iPod/iPhone.  
Hierarchy 1  
Hierarchy 2  
Hierarchy 3  
Hierarchy 4  
Playlist  
Song  
Song  
*
*
Artist  
Album  
*
Album  
Song  
Setting the iPod Control  
Song  
Podcast  
Episode  
When an iPod/iPhone is connected, operate it from its own controls or  
from the head unit.  
*
*
*
Genre  
Artist  
Album  
Song  
*
*
Composer  
Album  
Song  
1
Press and hold ENTEROPTION for at least 2 seconds  
in the iPod mode.  
Audiobook  
Note  
The Option menu for iPod mode is activated.  
You can select your preferred search mode. Refer to “iPod/iPhone  
2
Turn the Rotary encoder to select iPod CONT, and then  
press ENTER.  
For example:  
Searching by Artist name  
The iPod control mode will switch between iPod MODE and HU  
MODE.  
The following example explains how an ARTIST search is performed.  
Another search mode can be used for the same operation, although the  
hierarchy differs.  
HU (HEAD UNIT) MODE:  
Operate the iPod/iPhone via the head unit controls.  
iPod MODE:  
1
2
Press ENTER to activate the search selection mode.  
The “” indicator lights up.  
Operate the iPod/iPhone using its own controls. When iPod is  
selected, some functions will not be operable via the head unit.  
Notes  
Turn the Rotary encoder to select the ARTIST search  
mode, and then press ENTER.  
SHUFFLEALL*1 PLAYLIST ARTIST ALBUM SONG   
PODCAST GENRE COMPOSER AUDIOBOOK   
SHUFFLEALL  
Once the control mode is changed, this will set pause status, press   
to continue.  
Depending upon the iPod used, iPod control may not be selectable. Or,  
if iPod is selected, operation must still be from the head unit.  
Playback  
Note  
The display of search mode list varies depending on the setting of iPod  
1
2
Press SOURCE to switch to the iPod mode.  
3
4
5
Turn the Rotary encoder to select the desired Artist, and  
then press ENTER.  
Press or to select the desired song.  
Pressing and holding or will fast backward/fast  
Turn the Rotary encoder to select the desired Album, and  
then press ENTER.  
forward the current track.  
3
To pause playback, press .  
Turn the Rotary encoder to select the desired Song, and  
then press ENTER.  
Pressing again will resume playback.  
Notes  
A song playing on the iPod/iPhone while it is connected to this unit will  
continue to play from where it was paused after disconnection.  
If you listen to an episode from a selected Podcast or Audiobook, the  
episode can be changed by pressing 1or 2.  
An episode may have several chapters. The chapter can be changed by  
pressing or .  
During iPod/iPhone playback, press , and then you can quickly  
return to the hierarchy level selected last time in the search mode.  
37-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Notes  
After pressing and holding ENTER for at least 2 seconds while in  
Direct Search Function  
each hierarchy (except SONG and AUDIOBOOK hierarchy), all songs  
of the selected hierarchy are played back.  
The unit’s direct search function can be used to search for an album,  
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/  
PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can  
quickly target any song.  
After selecting [ALL] in the search mode with “*” (refer to the table on  
previous page), press and hold ENTER for at least 2 seconds to play  
back all songs in the iPod/iPhone or selected search mode.  
While in the search mode, if you press and hold for 2 seconds, or no  
operation is performed for 60 seconds, the search mode is canceled.  
In the search mode, pressing will return to the previous mode.  
When search is made during M.I.X. play, the M.I.X. play mode will be  
canceled.  
In the search mode, press any one of the preset buttons (1  
through 6) to quickly skip over a designated percent of  
your song content.  
“NO SONG” will be displayed if there are no songs in the selected  
playlist in the PLAYLIST search mode.  
Song search example:  
If there are 100 songs in your iPod/iPhone, they are divided into 6  
groups using percentages (shown below). These groups are  
assigned to the preset buttons (1 through 6).  
“NO PODCAST” will be displayed if there is no podcast data in the  
iPod/iPhone in the PODCAST search mode.  
“NOAUDIOBOK” will be displayed if there is no Audiobook data in the  
iPod/iPhone in AUDIOBOOK search mode.  
Example 1:  
If “iPod name” stored in the iPod/iPhone is selected in the desired  
Playlist search mode, and ENTER is pressed, you can search for all  
songs in the iPod/iPhone. Also, if you press and hold ENTER for at  
least 2 seconds, all songs in the iPod/iPhone are played back.  
Depending on the iPod/iPhone, podcast search is not supported.  
If any one of the preset buttons (1 through 6) is pressed in the  
search mode, a search can be made quickly by skipping to the specified  
During search mode, a search can be made quickly by Alphabet search  
function to find the desired artist or song, etc. For details, refer to  
Suppose the song you are searching for is located at around the  
middle (50%) of your library: press button 4 to jump to the 50th  
song and turn the Rotary encoder to find the desired song.  
Example 2:  
Suppose the song you are searching for is located near the end  
(83%) of your library: press button 6 to jump to the 83rd song  
and turn the Rotary encoder to find the desired song.  
All 100 songs (100%)  
0%  
17%  
33%  
50%  
67%  
83%  
Preset  
buttons  
1
2
3
4
5
6
Alphabet search function  
1st  
song  
17th  
song  
33rd  
song  
50th  
song  
67th  
song  
83rd  
song  
Songs  
The unit’s alphabet search function can be used to search for an album,  
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/  
PODCAST/GENRE/COMPOSER/AUDIOBOOK search mode, select  
the first letter of your desired title (album, song, etc.), the titles  
beginning with this letter are listed. By using this function, you can  
quickly target any song.  
Select Playlist/Artist/Album/Genre/  
Composer  
Playlist/Artist/Album/Genre/Composer can be easily changed.  
For example, if you listen to a song from a selected album, the album can  
be changed.  
1
2
In the search mode, press ABC SKIP.  
The letter selection list is displayed.  
Turn the Rotary encoder to select a desired letter (e.g. M),  
and then press ENTER.  
Press 1or 2 to select the desired Playlist/Artist/Album/  
Genre/Composer.  
The titles beginning with “M” are listed.  
Notes  
If the song search mode was used to select a song, this function is  
3
Turn the Rotary encoder to select the desired title.  
inactive.  
Notes  
If an album is selected during an artist search, other albums by that  
artist are searchable.  
This function is inactive during shuffle (s) playback.  
While in Alphabet search mode, pressing will return to the  
previous mode.  
If the PLAYLIST search mode is used to search for a song, the Alphabet  
search function is inactive in the song search hierarchy.  
This function is applied for letters A-Z.  
38-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Random Play Shuffle (M.I.X.)  
SiriusXM Satellite Radio  
Operation (CDE-HD138BT  
only, optional)  
The Shuffle function of the iPod/iPhone is displayed as s on this unit.  
Shuffle Albums:  
The songs on each album are played back in the order they were  
recorded. Upon completion of all the songs on the album, the next  
album is selected randomly. This continues until all albums have  
been played.  
SOURCE/  
Shuffle Songs:  
Rotary encoder/ /ENTER  
Song shuffle randomly plays back songs within a selected category  
(playlist, album, etc.). The songs within the category are played just  
once until all songs have been played.  
1
2
Press 5 s.  
The songs are played back in random sequence.  
s*1 s*2 (off) s  
*1 Shuffle Albums.  
*2 Shuffle Songs.  
BAND  
Preset buttons  
(1 through 6)  
VIEW  
/ Tag  
To cancel M.I.X. play, select (off) with the above procedure.  
Note  
If a song is selected in the album search mode before selecting M.I.X.  
play, the songs will not play back randomly even when Shuffle Albums  
is selected.  
SiriusXM Tuner operation:  
When a SiriusXM Tuner is connected to this unit, the following  
operations may be performed.  
Shuffle ALL:  
Shuffle ALL plays all songs in the iPod/iPhone randomly. Any one  
song does not play back again until all songs have been played back.  
Receiving Channels with the SiriusXM Tuner  
1
2
Press ENTER to activate the search selection mode.  
About SiriusXM Satellite Radio  
Turn the Rotary encoder to select SHUFFLEALL, and then  
press ENTER.  
The “g” indicator lights up.  
To cancel Shuffle ALL mode, press 5 s to select OFF.  
Note  
Everything worth listening to is on SiriusXM. Get over 130 channels,  
including the most commercial-free music, plus the best sports, news,  
talk and entertainment. A SiriusXM Tuner and Subscription are required.  
Note  
The SiriusXM Satellite Radio controls on this unit are available only  
when a SiriusXM Tuner is connected.  
If Shuffle ALL is selected, the selected songs being played back in the  
search mode are canceled.  
1
Press SOURCE to activate the Satellite Radio  
(SIRIUSXM) mode.  
Repeat Play  
2
Press or to select the desired channel.  
Holding down or will rapidly browse through the  
channels.  
Only Repeat One is available for the iPod/iPhone.  
Alternatively, you can enter the number of the desired channel  
using the numeric keypad on an optional remote control.  
Repeat One:  
A single song is repeatedly played back.  
1
Press a 4.  
The song is played back repeatedly.  
a* (off) a  
Checking the SiriusXM Radio ID Number  
*
Repeat One.  
To subscribe to the SiriusXM Satellite Radio service, it is necessary to  
locate and identify the Radio ID of your SiriusXM Tuner. The Radio ID  
contains 8 characters and can be found on the bottom of your SiriusXM  
Tuner or can be displayed on when selecting Channel 0 by following the  
steps below:  
2
To cancel repeat play, select (off) with the above  
procedure.  
Note  
During repeat playback, no other songs are selectable by pressing   
or .  
1
While in the Satellite Radio Mode, press or to  
select channel “0.  
The unit displays “RADIO ID” and ID number alternately.  
Note  
The Radio ID does not include the letters I, O, S or F.  
2
To cancel the ID number display, select a channel other  
than “0.  
39-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Notes  
If you try to store when the memory is full, “MEM FULL” is displayed  
Storing Channel Presets  
followed by “REPLACE/CANCEL”. If you want to replace an existing  
alert item, select “REPLACE” by turning Rotary encoder, and then  
press ENTER, the existing alert list stored in memory is displayed.  
Select one of the stored alerts using the Rotary encoder. To replace the  
selected alert, press ENTER and an “ART/SONG SAVED” pop-up  
screen is followed by an “X U(sed)/Y E(mpty)”.  
1
2
3
Press BAND to select the desired band you want to store  
the preset in.  
There are 3 Satellite Radio Preset bands.  
Each press of BAND changes the band: SXM1 SXM2 SXM3  
SXM1  
You can manage the stored Alert memory setting on Setup mode, for  
If no operation is performed for 60 seconds, the setting mode is  
canceled.  
Tune to the desired channel, and then press and hold (for  
at least 2 seconds) one of the preset buttons (1 through 6)  
to store the channel.  
The display then shows the stored Band and preset number (for  
example, SXM1-3 is shown when preset 3 of BAND1 is selected).  
Receiving and Tuning to an Alert  
Whenever a stored sports team, artist, or song is playing on another  
channel, an interruption ALERT appears on the unit display. To tune to  
the game, artist or song identified by the alert, follow the steps below:  
Repeat the procedure to store up to 5 other channels onto  
the same band.  
Notes  
A total of 18 channels can be stored in the preset memory, 6 Channels  
1
2
Turn the Rotary encoder to select the desired game, artist  
or song from the list of active alerts.  
for each band (SXM1, SXM2 and SXM3).  
If you store a new channel into a preset which already has a channel  
assigned, the current channel will be cleared and replaced with the new  
one.  
Press ENTER.  
Notes  
If no operation is performed for 5 seconds, the unit returns to normal  
mode.  
Tuning Channels using Presets  
Sports teams/Artist name and Song title which you have stored and  
which are currently playing will be displayed in a category called “MY  
GAMES”/“MY MUSIC” in search mode. For details, refer to “Search  
1
2
Press BAND to select the desired band of Presets you wish  
to access.  
Press the preset buttons (1 through 6) that has your  
desired Satellite Radio channel stored in memory.  
Search Function  
You can search for SiriusXM programming content by Category or by  
Channel.  
Storing the desired Artist/Song  
1
2
Press ENTER in the SiriusXM mode.  
While listening to SiriusXM Satellite Radio, you can be alerted when  
your favorite songs or artists are playing on other channels. An  
interruption ALERT will be displayed when a matching artist or song is  
found on another channel. For receiving interruption ALERT  
Turn the Rotary encoder to select the desired Category,  
and then press ENTER.  
3
Turn the Rotary encoder to select the desired Channel  
Name, and then press ENTER.  
1
Press and hold ENTER/OPTION for at least 2 seconds  
when a Song or the song of an Artist you want to store is  
playing.  
Searching by Channel  
The Option mode is activated.  
1
2
Turn the Rotary encoder to select ALL CHANS after step 1,  
and then press ENTER.  
All Channels will be displayed in a list.  
2
3
Turn the Rotary encoder to select ALERT MEMO, and then  
press ENTER.  
Turn the Rotary encoder to select the desired channel,  
and then press ENTER to confirm.  
Turn the Rotary encoder to choose SAVE ART? or SAVE  
SNG? (when available), and then press ENTER.  
Note  
Press VIEW k, the information of the broadcasting channels will be  
displayed. You can choose the desired channel from the artist name list  
or song name list.  
4
Each time you press VIEW k, the display changes as below.  
An “ART/SONG SAVED” pop-up screen is followed by an “X  
U(sed)/Y E(mpty).  
Channel number Channel name Artist name   
Song name Channel number  
X is the total number of song titles or artist names stored in  
memory, and Y is the total number of memory locations still  
available for storage.  
40-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Searching by My Music  
Replay Function  
*
1
2
Turn the Rotary encoder to select MY MUSIC after step 1,  
and then press ENTER.  
The artist names and song names that you have stored and are  
currently playing will be displayed in a list.  
In SiriusXM mode, you can pause, rewind and replay up to 30 minutes  
of live SiriusXM Satellite Radio.  
1
While listening to a SiriusXM channel, press to enter  
the Replay mode, which mutes the audio.  
*
Displayed only when the stored song or artist is broadcasting.  
The display will show “PAUSED” while in this mode.  
Turn the Rotary encoder to select the desired artist/song,  
and then press ENTER to confirm.  
The channel of the selected artist/song being broadcast is  
received.  
2
Press again to resume playback of the stored audio  
from the point at which it was paused.  
During playback, the SiriusXM Tuner will continue to store the  
channel audio until you exit the Replay mode (up to 30 minutes).  
Note  
Press VIEW k, the information of the broadcasting channels will be  
During REPLAY playback:  
displayed. You can choose the desired channel from the artist name list  
Fast rewind:  
Press and hold .  
Fast forward:  
Press and hold .  
Returning to the beginning of the current song:  
Press . (If you press in the first 2 seconds of a song,  
you return to the beginning of the previous song.)  
Advancing to the beginning of the next song:  
Press .  
or song name list.  
Each time you press VIEW k, the display changes as below.  
Artist name Song name Artist name  
Searching by My Games  
*
1
2
Turn the Rotary encoder to select MY GAMES after step 1,  
and then press ENTER.  
The sport teams that you have stored and the game is currently  
broadcasting will be displayed in a list.  
Notes  
If you continue to press Fast forward until the end, the Replay mode is  
canceled, and the unit will change to live SiriusXM radio mode.  
If you change channels while in Replay mode, the unit will exit Replay  
mode to live Satellite Radio mode and clear the Replay memory.  
*
Displayed only when the game of stored team is broadcasting.  
Turn the Rotary encoder to select the desired team, and  
then press ENTER to confirm.  
The channel of the selected game being broadcast is received.  
3
Press to cancel the REPLAY mode.  
The unit returns to live SiriusXM radio mode.  
Notes  
During channel search, pressing 1 or 2 to select another Category.  
Parental Lock Function  
The Search mode is canceled if you press and hold for at least  
2 seconds, or no operation is performed for 60 seconds in Search mode.  
Press in the search mode to return to the previous mode.  
This function can help restrict the listening of channels to children of  
appropriate age levels only. For information on setting the Parental  
When a locked channel is selected, a “CH LOCKED” pop-up screen is  
followed by a “LOCK CODE?.  
Using Jump Memory and Jump Recall  
function  
Input the 4-digit passcode you set in, and then press  
1
2
3
While in SiriusXM mode, select your favorite SiriusXM  
Channel.  
Turn the Rotary encoder to select the number from 0-9, and  
then use or to adjust the digit.  
The initial number is 0000.  
Press and hold for at least 2 seconds.  
The channel you selected is stored as the Jump Source.  
Notes  
Press and hold BAND for at least 2 seconds to recall, and  
then tune to the saved Jump Source channel.  
If you input a wrong passcode, “WRONG CODE” is displayed.  
After entering the correct passcode, you can access all locked channels  
without entering the passcode again until the unit is powered off and  
then back on.  
Note  
Pressing and holding BAND again for at least 2 seconds will jump back  
to the previous mode or SiriusXM channel.  
41-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Storing iTunes Tagging information  
Information  
iTunes Tagging lets you tag songs heard on SiriusXM channels. Using  
this unit in conjunction with an optional SiriusXM Tuner and a Tagging  
compatible iPod/iPhone, you can tag the music that you listen to, then  
transfer the tag information to your iPod/iPhone, and later, when your  
iPod/iPhone is connected to iTunes, you can preview, buy and download  
your tagged songs. For details, refer to the Owners Manual of the  
Tagging compatible iPod/iPhone.  
In Case of Difficulty  
If you encounter a problem, please turn the power off, then on again. If  
the unit is still not functioning normally, please review the items in the  
following checklist. This guide will help you isolate the problem if the  
unit is at fault. Otherwise, make sure the rest of your system is properly  
connected or consult your authorized Alpine dealer.  
The m indicator will light when a song playing on a SiriusXM  
channel has tag information available.  
Press and hold VIEW k/Tag for at least 2 seconds to save  
its tag information.  
Basic  
If no iPod/iPhone is connected, “TAG COUNT X” is displayed (X is  
the total amount of the tag information stored in this unit).  
No function or display.  
Vehicle’s ignition is off.  
Notes  
If connected following instructions, the unit will not operate with  
the vehicle’s ignition off.  
During tagging, the iPod/iPhone takes priority to save the tag  
information. If no iPod/iPhone is connected, the tag information is  
saved to this unit.  
When the memory of iPod/iPhone is full, “iPod FULL” and “TAG  
COUNT X” are displayed. The tag information will be stored to the  
unit.  
If the operation is failed, “CANNOT TAG” is displayed.  
This unit can store up to 50 tagged songs. When the memory of the unit  
is full, “TAGCOUNT50” and “MEMO FULL” are displayed.  
When an iPod that doesn’t support the tagging function is connected,  
“NON-TAGGING IPOD” is displayed.  
When the iPod/iPhone is disconnected from the unit during tagging, its  
tag information will be stored in the unit.  
Improper power lead (Red) and battery lead (Yellow) connections.  
Check power lead and battery lead connections.  
Blown fuse.  
Check the fuse of the unit; replace with the proper value if  
necessary.  
Internal micro-computer malfunctioned due to interference noise  
etc.  
Press the RESET button with a ballpoint pen or other pointed  
article.  
Radio  
If there is stored tag information on the unit, when an iPod/iPhone  
supporting the tag function is connected, the stored tag information will  
be transferred to the iPod/iPhone automatically. When the iPod/iPhone  
memory becomes full, “iPod FULL” will be displayed, and any  
remaining tag information on the unit will not be transferred to the  
iPod/iPhone.  
Unable to receive stations.  
No antenna or open connection in cable.  
Make sure the antenna is properly connected;  
replace the antenna or cable if necessary.  
Unable to tune stations in the seek mode.  
You are in a weak signal area.  
If tag information already exists, “ALREADY TAGGED” will be  
displayed when you try to tag information again.  
Make sure the tuner is in the DX mode.  
If the area you are in is a primary signal area, the antenna may not be  
grounded and connected properly.  
Changing the Display  
Check your antenna connections; make sure the antenna is  
properly grounded at its mounting location.  
The antenna may not be the proper length.  
Text information, such as the channel name, artist name/feature and  
song/program title, is available with each SiriusXM channel. The unit  
can display this text information as explained below.  
Make sure the antenna is fully extended; if broken, replace the  
antenna with a new one.  
Broadcast is noisy.  
In SiriusXM mode, press VIEW k.  
The antenna is not the proper length.  
Extend the antenna fully; replace it if it is broken.  
The antenna is poorly grounded.  
Each time you press this button, the display changes as shown  
below.  
Band/Channel Number Channel Name* Artist Name*   
Song Title* Content info.* Category Name* Clock   
Band/Channel Number  
Make sure the antenna is grounded properly at its mounting  
location.  
*
If there is no text information, nothing will be displayed.  
CD  
CD Player not functioning.  
Out of operating temperature range +50°C (+120°F) for CD.  
Allow the vehicle’s interior (or trunk) temperature to cool.  
CD playback sound is wavering.  
Moisture condensation in the CD Module.  
Allow enough time for the condensation to evaporate (about  
1 hour).  
CD insertion not possible.  
A CD is already in the CD player.  
Eject the CD and remove it.  
42-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
The CD is being improperly inserted.  
Make sure the CD is being inserted following instructions in the  
CD Player Operation section.  
Mechanism error.  
Unable to fast forward or backward the CD.  
The CD has been damaged.  
1
Press the button and eject the CD.  
If not ejecting, consult your Alpine dealer.  
Eject the CD and discard it; using a damaged CD in your unit can  
cause damage to the mechanism.  
2
When the error indication remains after ejecting, press the   
button again.  
CD playback sound skips due to vibration.  
If the error indication still does not turn off after pressing the   
button for a few times, consult your Alpine dealer.  
When “ERROR” is displayed:  
If the disc cannot be ejected by pressing , press the RESET button  
If the disc still cannot be ejected, consult your Alpine dealer.  
Improper mounting of the unit.  
Securely re-mount the unit.  
The disc is very dirty.  
Clean the disc.  
The disc has scratches.  
Change the disc.  
The pick-up lens is dirty.  
Do not use a commercially available lens cleaner disc. Consult  
your nearest Alpine dealer.  
A sampling rate/bit rate not supported by the unit is used.  
CD playback sound skips without vibration.  
The disc is dirty or scratched.  
Clean the disc; damaged disc should be replaced.  
Use a sampling rate/bit rate that is supported by the unit.  
Indication for Pandora® Mode  
Error displays (built-in CD player only).  
Mechanical error.  
Press . After the error indication disappears, insert the disc  
again. If the above-mentioned solution does not solve the problem,  
consult your nearest Alpine dealer.  
NO STATION  
®
You have not created any personalized Pandora Stations.  
®
When you are not driving, use the Pandora application on the  
smartphone to create your Pandora station(s).  
CD-R/CD-RW playback not possible.  
Close session (finalization) has not been performed.  
Perform finalization and attempt playback again.  
®
SEE DEVICE  
MP3  
®
The music cannot be played because the Pandora application on the  
smartphone requires the users attention.  
MP3 is not played back.  
Writing error occurred. The MP3 format is not compatible.  
®
When you are not driving, please see the Pandora application on  
the smartphone.  
Make sure the MP3 has been written in a supported format. Refer  
to About MP3/WMA/AAC” on page 14, and then rewrite in the  
format supported by this device.  
NO SERVICE  
Audio  
®
You switched CDE-HD138BT/CDE-HD137BT to Pandora mode by  
The sound is not output from the speakers.  
Unit has no output signal of the internal amplifier.  
pressing SOURCE with smartphone paired, without launching or  
®
installing the Pandora application on the smartphone.  
POWER IC is switched to “POW ON, refer to “Connecting to an  
®
Launch the Pandora application on the smartphone.  
Select a source other than Pandora by pressing SOURCE.  
®
iPod  
Indication for Flash Memory  
iPod does not play and no sound is output.  
The iPod has not been recognized.  
page 9. To reset the iPod, refer to the Owners Manual of the iPod.  
A USB device that is not supported by the unit is connected.  
Connect a USB device that is supported by the unit.  
Indication for CD Player  
NO DEVICE  
A Flash Memory is not connected.  
No CD is inserted.  
Make sure the Flash Memory device is correctly connected and the  
cable is not excessively bent.  
Insert a CD.  
Although a disc is inserted, “NO DISC” is displayed and the unit does  
not start to play or eject the disc.  
Remove the disc by following these steps:  
Press the button again for at least 2 seconds.  
If the disc still does not eject, consult your Alpine dealer.  
No MP3 (file) is stored in the Flash Memory.  
Connect the Flash Memory device after storing songs (files).  
43-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
A sampling rate/bit rate not supported by the unit is used.  
Use a sampling rate/bit rate that is supported by the unit.  
Power surge error.  
Excessive voltage/current is supplied to the iPod/iPhone.  
Try another iPod/iPhone, if available.  
NO SUPPORT  
BLUETOOTH mode  
Text information that is not recognizable by the unit is being used.  
Change the text information to text that is supported by the unit.  
The BLUETOOTH device is not connected.  
Connect the BLUETOOTH device.  
Communication error.  
Turn the ignition key off, and then set to ON again.  
Check the display by reconnecting between the Flash Memory and  
this unit.  
SiriusXM Advisory Messages  
(CDE-HD138BT only)  
The following messages may be displayed while operating the unit in  
SiriusXM mode.  
Power surge error.  
Excessive voltage/current is supplied to the Flash Memory.  
The SiriusXM Tuner is disconnected or the unit is having trouble  
communicating with the Tuner.  
Connect the Tuner or check the Tuner connection to the back of  
the unit.  
Try another Flash Memory, if available.  
Indication for iPod Mode  
The iPod/iPhone is not connected.  
The SiriusXM Satellite Radio antenna or cable is either damaged or  
not connected correctly to the SiriusXM Tuner.  
Make sure the iPod/iPhone is correctly connected (refer to  
Make sure the cable is not bent excessively.  
Check that the SiriusXM antenna cable is connected to the  
SiriusXM Tuner and check that the antenna cable is not kinked or  
otherwise damaged. Replace the antenna if necessary.  
There are no songs in the iPod/iPhone.  
Download songs to the iPod/iPhone.  
The SiriusXM satellite signal is too weak at the current location.  
Move the vehicle to a location with a clear view of the southern  
sky.  
Make sure the Satellite Radio antenna is properly mounted and not  
obstructed by metal objects.  
Communication error.  
Turn the ignition key off, and then set to ON again.  
Reset the iPod.  
Check the display by reconnecting between the iPod/iPhone and  
this unit, using the iPod/iPhone cable.  
The active channel has become unsubscribed or the requested  
channel is not available in your subscription package.  
Note  
The unit will revert to the previous selected channel or to channel 1  
automatically.  
Caused by the iPod/iPhone Software Version not being compatible  
with this unit.  
Update the iPod/iPhone Software Version to be compatible with  
this unit.  
channel.  
The active channel is no longer in the SiriusXM channel lineup or the  
user has entered an invalid channel number.  
The iPod/iPhone is not verified.  
Reset the iPod.  
Try another iPod/iPhone, if available.  
Note  
The unit will revert to the previous channel or to channel 1  
automatically.  
lineup.  
44-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Your subscription has been updated.  
Press any button to clear this message.  
A locked channel is selected.  
Input the passcode. On how to input passcode, refer to “Setting the  
Note  
If wrong passcode is input, “WRONG CODE” will be displayed and the  
unit will revert to the previous selected channel.  
Buffer for Replay will full within 11 seconds.  
Buffer for Replay is full.  
45-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL  
Power Requirement  
14.4 V DC  
Specifications  
(11~16 V allowable)  
18 W RMS × 4  
*
Power Output  
FM TUNER SECTION  
Tuning Range  
87.7~107.9 MHz  
9.3 dBf (0.8 μV/75 ohms)  
13.5 dBf (1.3 μV/75 ohms)  
80 dB  
65 dB  
35 dB  
2.0 dB  
*
Primary amplifier ratings per CEA-2006 Standard  
Power output: measured at 4 Ohms and ≤ 1% THD+N  
S/N: 80 dBA (reference: 1 W into 4 Ohms)  
Mono Usable Sensitivity  
50 dB Quieting Sensitivity  
Alternate Channel Selectivity  
Signal-to-Noise Ratio  
Stereo Separation  
Maximum Pre-Output Voltage 2 V/10 k ohms  
(CDE-HD137BT)  
4 V/10 k ohms  
(CDE-HD138BT)  
Capture Ratio  
Bass  
14 dB at 100 Hz  
(CDE-HD137BT)  
6 dB at 100 Hz  
AM TUNER SECTION  
Tuning Range  
Sensitivity (IEC Standard)  
530~1,710 kHz  
22.5 μV/27 dB  
(CDE-HD138BT)  
14 dB at 10 kHz  
(CDE-HD137BT)  
6 dB at 10 kHz  
Treble  
CD PLAYER SECTION  
Frequency Response  
5~20,000 Hz ( 1 dB)  
Below measurable limits  
0.008% (at 1 kHz)  
95 dB (at 1 kHz)  
105 dB  
(CDE-HD138BT)  
10 dB at 100 Hz  
1.5 kg (3 lbs. 4 oz)  
Wow & Flutter (% WRMS)  
Total Harmonic Distortion  
Dynamic Range  
Signal-to-Noise Ratio  
Channel Separation  
Loudness  
Weight  
CHASSIS SIZE  
85 dB (at 1 kHz)  
Width  
Height  
Depth  
178 mm (7")  
50 mm (2")  
161 mm (6–3/8")  
PICKUP  
Wave length  
795 nm  
Laser power  
CLASS I  
NOSEPIECE SIZE  
Width  
Height  
Depth  
170 mm (6–3/4")  
46 mm (1–13/16")  
25 mm (1")  
USB SECTION  
USB requirements  
Max. Power Consumption  
USB Class  
File System  
MP3 Decoding  
WMA Decoding  
AAC Decoding  
USB 1.1/2.0  
1,000 mA  
Mass Storage  
FAT 12/16/32  
MPEG AUDIO Layer-3  
Note  
Due to continuous product improvement, specifications and design are  
subject to change without notice.  
Windows Media Audio  
AAC-LC format .m4a” file  
BLUETOOTH SECTION  
BLUETOOTH Specification  
BLUETOOTH V 3.0  
Output Power  
Profile  
+4 dBm Max. (Power class 2)  
HFP (Hands-Free Profile)  
HSP (Head Set Profile)  
A2DP (Advanced Audio  
Distribution Profile)  
AVRCP (Audio/Video Remote  
Control Profile)  
46-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and Connections  
Before installing or connecting the unit, please read the following  
CAUTION  
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.  
WARNING  
The wiring and installation of this unit requires special technical  
skill and experience. To ensure safety, always contact the dealer  
where you purchased this product to have the work done.  
MAKE THE CORRECT CONNECTIONS.  
Failure to make the proper connections may result in fire or  
product damage.  
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.  
Be sure to use only the specified accessory parts. Use of other than  
designated parts may damage this unit internally or may not  
securely install the unit in place. This may cause parts to become  
loose resulting in hazards or product failure.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.  
(Check with your dealer if you are not sure.) Failure to do so may  
result in fire, etc.  
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY  
TERMINAL.  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP  
METAL EDGE.  
Failure to do so may result in electric shock or injury due to  
electrical shorts.  
Route the cables and wiring away from moving parts (like the seat  
rails) or sharp or pointed edges. This will prevent crimping and  
damage to the wiring. If wiring passes through a hole in metal, use a  
rubber grommet to prevent the wires insulation from being cut by  
the metal edge of the hole.  
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING  
OBJECTS.  
Arrange wiring and cables in compliance with the manual to  
prevent obstructions when driving. Cables or wiring that obstruct  
or hang up on places such as the steering wheel, gear lever, brake  
pedals, etc. can be extremely hazardous.  
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.  
Avoid installing the unit in locations with high incidence of  
moisture or dust. Moisture or dust that penetrates into this unit may  
result in product failure.  
DO NOT SPLICE INTO ELECTRICAL CABLES.  
Never cut away cable insulation to supply power to other  
equipment. Doing so will exceed the current carrying capacity of  
the wire and result in fire or electric shock.  
PRECAUTIONS  
Be sure to disconnect the cable from the (−) battery post before  
installing your CDE-HD138BT/CDE-HD137BT. This will reduce any  
chance of damage to the unit in case of a short-circuit.  
Be sure to connect the color coded leads according to the diagram.  
Incorrect connections may cause the unit to malfunction or damage  
to the vehicle’s electrical system.  
When making connections to the vehicles electrical system, be aware  
of the factory installed components (e.g. on-board computer). Do not  
tap into these leads to provide power for this unit. When connecting  
the CDE-HD138BT/CDE-HD137BT to the fuse box, make sure the  
fuse for the intended circuit of the CDE-HD138BT/CDE-HD137BT  
has the appropriate amperage. Failure to do so may result in damage  
to the unit and/or the vehicle. When in doubt, consult your Alpine  
dealer.  
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.  
When drilling holes in the chassis for installation, take precautions  
so as not to contact, damage or obstruct pipes, fuel lines, tanks or  
electrical wiring. Failure to take such precautions may result in fire.  
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO  
MAKE GROUND CONNECTIONS.  
Bolts or nuts used for the brake or steering systems (or any other  
safety-related system), or tanks should NEVER be used for  
installations or ground connections. Using such parts could disable  
control of the vehicle and cause fire etc.  
The CDE-HD138BT/CDE-HD137BT uses female RCA-type jacks for  
connection to other units (e.g. amplifier) having RCA connectors.  
You may need an adaptor to connect other units. If so, please contact  
your authorized Alpine dealer for assistance.  
Be sure to connect the speaker (−) leads to the speaker (−) terminal.  
Never connect left and right channel speaker cables to each other or  
to the vehicle body.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF  
CHILDREN.  
Swallowing them may result in serious injury. If swallowed, consult  
a physician immediately.  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE  
OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.  
IMPORTANT  
Doing so may obstruct forward vision or hamper movement etc.  
and results in serious accident.  
Please record the serial number of your unit in the space provided  
below and keep it as a permanent record. The serial number or the  
engraved serial number is located on the bottom of the unit.  
SERIAL NUMBER: [  
]
]
]
]
INSTALLATION DATE: [  
INSTALLATION TECHNICIAN: [  
PLACE OF PURCHASE: [  
47-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2
Reinforce the head unit with a metal mounting strap (not  
supplied). Secure the ground lead of the unit to a clean  
metal spot using a screw ( ) already attached to the  
Installation  
*1  
vehicle’s chassis.  
Connect each input lead coming from an amplifier to the  
corresponding output lead coming from the left rear of the  
CDE-HD138BT/CDE-HD137BT. Connect all other leads of the  
CDE-HD138BT/CDE-HD137BT according to details described in  
the CONNECTIONS section.  
Air ventilation hole  
Screw  
Hex Nut (M5)  
Rear of the Unit  
2
*
Bolt Stud  
Caution  
Do not block the units fan or heat sink, thus preventing air  
circulation. If blocked, heat will accumulate inside the unit and may  
cause a fire.  
Metal  
Mounting  
Strap  
1
*
Caution  
When you install this unit in your car, do not remove the  
detachable front panel.  
If the detachable front panel is removed during installation, you  
might press too hard and warp the metal plate that holds it in  
place.  
This unit  
Ground Lead  
Chassis  
The main unit must be mounted within 35 degrees of the  
horizontal plane, back to front.  
Note  
For the screw marked “*2”, use an appropriate screw for the chosen  
mounting location.  
3
Slide the CDE-HD138BT/CDE-HD137BT into the dashboard  
until it clicks. This ensures that the unit is properly locked  
and will not accidentally come out from the dashboard.  
Install the detachable front panel.  
Detachable Front  
Panel  
Removal  
1
2
Remove the detachable front panel.  
Less than 35°  
Insert the bracket keys into the unit, along the guides on  
either side. The unit can now be removed from the  
mounting sleeve.  
1
Remove the mounting sleeve from the main unit (refer to  
This unit  
Bracket keys  
(Included)  
Mounting Sleeve (Included)  
Dashboard  
Pressure Plates*  
This unit  
*
If the installed mounting sleeve is loose in the dashboard, the  
pressure plates may be bent slightly to remedy the problem.  
48-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3
Pull the unit out, keeping it unlocked as you do so.  
JAPANESE CAR  
Front Frame  
Screws (M5 × 8)  
(Included)  
This unit  
Ground Lead  
3
*
Mounting Bracket  
Note  
Secure the ground lead of the unit to a clean metal spot using a screw  
(*3) already attached to the vehicle’s chassis.  
Mounting the Microphone  
For the sake of safety, mount the microphone in the following location.  
In a stable and secure location.  
In a location that does not inhibit safely driving the vehicle.  
Mount the microphone in a location where the drivers voice can  
easily be picked up.  
Choose a location for the microphone that can easily pick up the drivers  
voice. Requiring the driver to move towards the microphone for  
audibility causes a distraction that could be dangerous.  
49-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connections  
Antenna  
POWER ANT  
(Blue)  
(Blue/White)  
(Pink/Black)  
To power antenna  
To amplifier  
REMOTE TURN-ON  
AUDIO INTERRUPT IN  
Not used  
(Orange)  
(Red)  
ILLUMINATION  
To the instrument cluster illumination  
lead  
IGNITION  
BATTERY  
Ignition Key  
(Yellow)  
(Black)  
GND  
Battery  
(Gray)  
Speakers  
Front Right  
SPEAKER  
RIGHT FRONT  
(Gray/Black)  
(Violet/Black)  
SPEAKER  
RIGHT REAR  
Rear Right  
Rear Left  
(Violet)  
(Green)  
SPEAKER  
LEFT REAR  
(Green/Black)  
(White/Black)  
SPEAKER  
LEFT FRONT  
Front Left  
(White)  
Microphone  
Speakers  
Amplifier  
Amplifier  
Front or Subwoofers*  
Amplifier  
50-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Antenna Receptacle  
To prevent external noise from entering the audio system.  
Power Antenna Lead (Blue)  
Connect this lead to the +B terminal of your power antenna, if  
applicable.  
Locate the unit and route the leads at least 10 cm away from the  
car harness.  
Keep the battery power leads as far away from other leads as  
Note  
possible.  
This lead should be used only for controlling the vehicle’s power  
antenna. Do not use this lead to turn on an amplifier or a signal  
processor, etc.  
Connect the ground lead securely to a bare metal spot (remove  
any paint, dirt or grease if necessary) of the car chassis.  
If you add an optional noise suppressor, connect it as far away  
from the unit as possible. Your Alpine dealer carries various  
noise suppressors, contact them for further information.  
Your Alpine dealer knows best about noise prevention  
measures so consult your dealer for further information.  
Remote Turn-On Lead (Blue/White)  
Connect this lead to the remote turn-on lead of your amplifier or  
signal processor.  
Not used  
Illumination Lead (Orange)  
This lead may be connected to the vehicle’s instrument cluster  
illumination lead. This will allow the backlighting of this unit to dim  
whenever the vehicle’s lights are turned on.  
Switched Power Lead (Ignition) (Red)  
Connect this lead to an open terminal on the vehicle’s fuse box or  
another unused power source which provides (+) 12V only when the  
ignition is turned on or in the accessory position.  
Battery Lead (Yellow)  
Connect this lead to the positive (+) post of the vehicle’s battery.  
Ground Lead (Black)  
Connect this lead to a good chassis ground on the vehicle. Make sure  
the connection is made to bare metal and is securely fastened using  
the sheet metal screw provided.  
Right Front (+) Speaker Output Lead (Gray)  
Right Front (−) Speaker Output Lead (Gray/Black)  
Right Rear (−) Speaker Output Lead (Violet/Black)  
Right Rear (+) Speaker Output Lead (Violet)  
Left Rear (+) Speaker Output Lead (Green)  
Left Rear (−) Speaker Output Lead (Green/Black)  
Left Front (−) Speaker Output Lead (White/Black)  
Left Front (+) Speaker Output Lead (White)  
Fuse Holder (10 A)  
Power Supply Connector  
SiriusXM Tuner connector (CDE-HD138BT only)  
Connect to a SiriusXM Tuner.  
Steering Remote Control Interface Connector  
To steering remote control interface box.  
With an optional Alpine Steering Wheel Remote Control Interface  
Box (not included), this unit is controllable from the vehicles steering  
wheel controls. For details, contact your Alpine dealer.  
MIC Input Connector  
To Microphone.  
Front Output RCA Connectors  
RED is right and WHITE is left.  
Rear Output RCA Connectors  
RED is right and WHITE is left.  
Subwoofer Output RCA Connectors  
RED is right and WHITE is left.  
Microphone (Supplied)  
RCA Extension Cable (sold separately)  
Front AUX Input Terminal  
This terminal allows for input of audio from an external device (such  
as a portable player), using a commercially-available converter cable.  
USB Connection Terminal  
Connect this to Flash Memory or to an iPod/iPhone.  
51-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. (“Alpine”), are dedicated to quality craftsmanship and are pleased to offer  
this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the  
telephone numbers listed below.  
You must supply proof of your purchase of the product.  
PRODUCTS COVERED:  
You must package the product securely to avoid damage during  
shipment. To prevent lost packages it is recommended to use a  
carrier that provides a tracking service.  
This Warranty covers Car Audio Products and Related Accessories (“the  
product”). Products purchased in the Canada are covered only in the  
Canada. Products purchased in the U.S.A. are covered only in the U.S.A.  
HOW WE LIMIT IMPLIED WARRANTIES:  
LENGTH OF WARRANTY:  
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND  
MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE  
EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS  
AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN  
CONNECTION WITH THE SALE OF THE PRODUCT.  
This Warranty is in effect for one year from the date of the first  
consumer purchase.  
WHO IS COVERED:  
This Warranty only covers the original purchaser of the product, who  
must reside in the United States, Puerto Rico or Canada.  
HOW WE EXCLUDE CERTAIN DAMAGES:  
WHAT IS COVERED:  
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND  
CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE TERM  
“INCIDENTAL DAMAGES” REFERS TO EXPENSES OF TRANSPORTING  
THE PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF THE  
ORIGINAL PURCHASER’S TIME, LOSS OF THE USE OF THE PRODUCT,  
BUS FARES, CAR RENTALS OR OTHERS COSTS RELATING TO THE CARE  
AND CUSTODY OF THE PRODUCT. THE TERM “CONSEQUENTIAL  
DAMAGES” REFERS TO THE COST OF REPAIRING OR REPLACING OTHER  
PROPERTY WHICH IS DAMAGED WHEN THIS PRODUCT DOES NOT  
WORK PROPERLY. THE REMEDIES PROVIDED UNDER THIS WARRANTY  
ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.  
This Warranty covers defects in materials or workmanship (parts and  
labor) in the product.  
WHAT IS NOT COVERED:  
This Warranty does not cover the following:  
Damage occurring during shipment of the product to Alpine for  
repair (claims must be presented to the carrier).  
Damage caused by accident or abuse, including burned voice coils  
caused by over-driving the speaker (amplifier level is turned up  
and driven into distortion or clipping). Speaker mechanical failure  
(e.g. punctures, tears or rips). Cracked or damaged LCD panels.  
Dropped or damaged hard drives.  
Damage caused by negligence, misuse, improper operation or  
failure to follow instructions contained in the Owner’s manual.  
Damage caused by act of God, including without limitation,  
earthquake, fire, flood, storms or other acts of nature.  
Any cost or expense related to the removal or reinstallation of the  
product.  
Service performed by an unauthorized person, company or  
association.  
Any product which has the serial number defaced, altered or  
removed.  
Any product which has been adjusted, altered or modified without  
Alpine’s consent.  
HOW STATE/PROVINCIAL LAW RELATES TO THE  
WARRANTY:  
This Warranty gives you specific legal rights, and you may also have  
other rights which vary from state to state and province to province. In  
addition, some states/provinces do not allow limitations on how long  
an implied warranty lasts, and some do not allow the exclusion or  
limitation of incidental or consequential damages. Accordingly,  
limitations as to these matters contained herein may not apply to you.  
IN CANADA ONLY:  
This Warranty is not valid unless your Alpine car audio product has  
been installed in your vehicle by an Authorized Installation Center, and  
this warranty stamped upon installation by the installation center.  
Any product not distributed by Alpine within the United States,  
Puerto Rico or Canada.  
Any product not purchased from an Authorized Alpine Dealer.  
HOW TO CONTACT CUSTOMER SERVICE:  
Should the product require service, please call the following number  
for your nearest Authorized Alpine Service Center.  
CAR AUDIO  
1-800-ALPINE-1 (1-800-257-4631)  
1-888-NAV-HELP (1-888-628-4357)  
HOW TO OBTAIN WARRANTY SERVICE:  
You are responsible for delivery of the product to an Authorized  
Alpine Service Center or Alpine for repair and for payment of any  
initial shipping charges. Alpine will, at its option, repair or replace  
the product with a new or reconditioned product without charge.  
If the repairs are covered by the warranty, and if the product was  
shipped to an Authorized Alpine Service Center or Alpine, Alpine  
will pay the return shipping charges.  
NAVIGATION  
You should provide a detailed description of the problem(s) for  
which service is required.  
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.  
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada  
Do not send products to these addresses.  
Call the toll free telephone number or visit the website to locate a service center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
About the Rules of Bluetooth Electromagnetic Radiation Regulation  
USA/Canada  
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including  
interference that may cause undesired operation of this device.  
FCC WARNING  
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s  
authority to operate the equipment.  
México  
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) Este dispositivo no puede causar  
interferencia perjudicial, (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo interferencia  
que puede ser causada por la operación no deseada del equipo (que puede causar un funcionamiento no deseado).  
Don’t forget to take a moment to protect your purchase by registering your product now at the following  
N’oubliez pas de consacrer un moment à la protection de votre achat en enregistrant votre produit dès  
Recuerde que con solo unos pocos pasos podrá proteger su producto, registrándolo a través de la siguiente  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Abocom Network Router GP1000DM User Manual
Accusplit Fitness Electronics AL625M8D User Manual
ADT Security Services Automobile Alarm FOCUS 200 PLUS User Manual
AEG Range 3007VNM M User Manual
Agri Fab Spreader 175 User Manual
AMCC Computer Accessories 9690SA User Manual
AMX Power Supply NXA UPS1500 User Manual
BC Speakers Portable Speaker 8CXT User Manual
BC Speakers Speaker 15PLB76 User Manual
Behringer Stereo Equalizer FADERB CF2000B User Manual