Allstar Products Group Satellite Radio 112052 User Manual

Operational Check  
After installing your keypad, check the operation by entering the door number and  
pressing Open, Close or Stop. Operation should be reliable. However, environmental  
conditions and the location of the keypad and or receiver will affect distance.  
If the keypad doesn’t activate the operator check the door number. The door  
b y  
MVP Commercial  
number entered must exactly match the door number by the receiver.  
Press the STOP/ON button and wait a seconds before entering your door  
number. Press the keys slowly.  
Keypad Transmitter  
If the distance is inadequate check the battery and replace if necessary.  
Installation Instructions  
To maximize the operating distance move the keypad to different locations  
until a satisfactory distance is achieved. Metal and some types of construction  
will affect distance.  
Model 112052  
Proper installation of your radio controls will assure years of  
trouble-free operation  
READ THE FOLLOWING INSTRUCTIONS THOROUGHLY  
BEFORE STARTING INSTALLATION  
If system does not work at any distance, check that the operator is properly  
operating from the wall station and any other hand-held transmitters.  
Try to erase the receiver and re-lean the door number and any additional hand-  
held transmitters.  
The MVP Commercial Keypad Transmitter is designed to remotely operate MVP  
Quik-Code Receivers. When used with a 3-channel receiver, the keypad permits  
the user to operate up to 240 different door operators with open, close and stop  
functions. The radio frequency of the remote controls is fixed and tuned at the  
factory; adjustments are not required and should not be attempted by the end user.  
WARNING  
Refer to the door operator installation and owner’s manual for proper  
installation and use and adjustments. Follow all warnings.  
Test the safety systems of your door operator monthly to ensure that  
the system remains in proper adjustment.  
WARNING  
Keep transmitters and remote controls out of the reach of children.  
Do not let children play with or use the transmitter or remote controls.  
Unexpected door operations can cause personal injury or property damage.  
Do not place transmitter where the buttons can be accidentally or  
unintentionally activated.  
Manufacturer’s Limited Warranty  
Features of the Commercial Keypad Transmitter  
Allstar warrants its radio controls to be free from defect in material and workmanship for a period of one (1) year from the  
date of purchase. To obtain service, contact your dealer.  
ON/STOP: This key turns on the keypad and light system allowing you to  
operated the system as well as to see the keys in the dark. The keypad will remain  
active and lights will remain lit for 45 seconds after the last key is pressed.  
To obtain service under this warranty the buyer must obtain authorization instructions from Allstar for the return of any  
goods before returning the goods. The goods must be returned with complete identification, with copy of proof-of-purchase,  
freight prepaid and in accordance with Allstar’s instructions or they will not be accepted. In no event will Allstar be  
responsible for goods returned without proper authorization or identification.  
3-Button Operation Mode: Once you have entered a valid 3-digit door number,  
the door is activated by pressing either Open, Close, or Stop button. Until another  
door number is entered or the keypad times-out (keypad lights turn off), the  
same door may be reactivated by pressing either Open, Close or Stop.  
Goods returned to Allstar for warranty repair within the warranty period, which upon receipt by Allstar are confirmed to be  
defective and covered by this limited warranty, will be repaired or replaced at Allstar’s sole option, at no cost and returned  
pre-paid. Defective parts will be repaired or replaced with new or factory rebuilt parts at Allstar’s sole option.  
This limited warranty does not cover non-defect damage, damage caused by unreasonable use, damage caused by improper  
installation or care, vandalism or lightning, fire or excessive heat, flood or other acts of God (including, but not limited to  
misuse, abuse or alterations, failure to provide reasonable and necessary maintenance), labor charges for dismantling or  
reinstalling a repaired or replaced unit, or replacement batteries.  
Low Battery Indicator: The lighting for your keypad also serves as a low  
battery indicator. When the keypad lights flash on and off the battery should be  
replaced with a alkaline 9 volt battery.  
These warranties are in lieu of all other warranties, either expressed or implied. All implied warranties of merchantability  
and/or fitness for a particular purpose are hereby disclaimed and excluded. Under no circumstances shall Allstar be liable for  
consequential, incidental or special damages arising in connection with the use or inability to use this product. In no event  
shall Allstar’s liability for breach of warranty, breach of contract, negligence or strict liability exceed the cost of the product  
covered hereby. No person is authorized to assume for Allstar any other liability in connection with the sale of this product.  
Non-Volatile Memory: It is not necessary to reprogram the keypad after you  
replace your battery.  
This warranty gives you specific legal rights. Warranty effective after August 1, 2004.  
Allstar MVP Quik-CodeTransmitters and Receivers are  
compatible with HomeLink®.  
HomeLink® is a registered trade mark of Johnson Controls.  
Copyright © 2004 c.p.Allstar Corporation PART NUMBER 112261 REV A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3D Connexion Two Way Radio NC1020 User Manual
Accusplit Heart Rate Monitor AE625M35 User Manual
ACDelco Home Safety Product LG08 User Manual
Acer Personal Computer 4949C02001 User Manual
AIPTEK Digital Camera SD 2Mega User Manual
Alesis Musical Instrument MIXING CONSOLES User Manual
Alpine Car Video System IVE W535HD User Manual
Alps Electric Switch SKRN Series User Manual
Atmel Computer Hardware AVR430 MC300 User Manual
GR GA 13 986 127GHK 13 986 133G GR GA 13 986 133GHK User Manual