Allied Telesis Switch SB251 08 User Manual

Patch Release Note

Patch SB251-08

For SwitchBlade 4000 Series Switches and

AT-9800 Series Switches

Introduction

This patch release note lists the issues addressed and enhancements made in

patch SB251-08 for Software Release 2.5.1 on existing models of SwitchBlade

4000 Series Switches and AT-9800 Series Switches. Patch file details are listed in

Table 1.

Table 1: Patch file details for Patch SB251-08.

Base Software Release File

Patch Release Date

sb-251.rez

14-May-2003

sb251-08.paz

86524 bytes

Compressed Patch File Name

Compressed Patch File Size

This release note should be read in conjunction with the following documents:

■

SwitchBlade Documentation Set for Software Release 2.5.1 (Document

Number C613-03057-00 Rev A).

AT9800 Series Switches Documentation Set for Software Release 2.5.1

(Document Number C613-03056-00 Rev A)

Release Note for Software Release 2.5.1 for SwitchBlade 4000 Switches and

AT-9800 Series Switches (Document Number C613-10354-00 Rev D)

available on the Documentation and Tools CD-ROM packaged with your

switch, or from www.alliedtelesyn.co.nz/documentation/documentation.html.

WARNING: Using a patch for a different model or software release may cause

unpredictable results, including disruption to the network. Information in this

release note is subject to change without notice and does not represent a

commitment on the part of Allied Telesyn International. While every effort has

been made to ensure that the information contained within this document and

the features and changes described are accurate, Allied Telesyn International

can not accept any type of liability for errors in, or omissions arising from the

use of this information.

Simply connecting the world

Download from Www.Somanuals.com. All Manuals Search And Download.

Patch SB251-08 For SwitchBlade 4000 Series Switches and AT-9800 Series Switches

Features in SB251-07

Patch file details are listed in T a ble 2:

Table 2: Patch file details for Patch SB251-07.

sb-251.rez

Base Software Release File

Patch Release Date

22-Apr-2003

sb251-07.paz

86524 bytes

Compressed Patch File Name

Compressed Patch File Size

Patch SB251-07 includes all issues resolved and enhancements released in

previous patches for Software Release 2.5.1, and the following enhancements:

PCR: 03399

Module: STP, SWI

Level: 1

With this enhancement:

•

STP and Port Trunking now work together correctly.

BDPU Forwarding is implemented. The BPDU Forwarding feature

configures the switch to forward all received STP BPDUs. Under

normal circumstances, the switch will not forward any received STP

BPDUs, even if STP is enabled.

This implementation is for standard STP, it does not guarantee that RSTP

and port trunking will work correctly together in all situations.

STP does not update the pathcost for trunked ports, which means that a

trunk group has the same pathcost as a single port. This may cause STP

Blocking where it is not expected. To overcome this, the user should

explicitly set the pathcost for the trunk group ports to be less than the

default value for a single port.

STP reconfigures if the Master port in a trunk group goes link down. If the

Master port in a trunk group goes link down, and a Non-Master port is still

link-up, then STP will go through the Listening>Learning>Forwarding

reconfiguration on the new Master port. This means that there will be a

switching outage on the trunk group whilst the new Master port transitions

to the Forwarding state.

Command handler changes:

•

The PORT parameter of the CREATE SWITCH TRUNK PORT and ADD

SWITCH TRUNK PORT commands must specify ports that have

identical STP port configurations.

•

The ENABLE STP and ENABLE STP PORT commands cannot be used

to enable STP operation on a port that has been disabled from STP

operation because of Port Trunking. Only the Master port in a trunk

group actively participates in the STP algorithm. Non-Master ports in

the trunk group are in the STP Disabled State.

•

The output for the SHOW STP PORT command has been modifed so

that Non-Master Ports in a trunk group do not take part in the STP

algorithm.

The output for the SHOW STP PORT command has been modified so

that it displays whether a user has set the PATHCOST value, or if it was

auto-configured.

Patch SB251-08 for Software Release 2.5.1

C613-10361-00 REV H

Download from Www.Somanuals.com. All Manuals Search And Download.

Patch Release Note

•

The PORT parameter of the SET STP PORT command specifies either all

the ports in a trunk group, or none of the ports in a trunk group.

The STPFORWARD parameter has been added to the ENABLE

SWITCH and DISABLE SWITCH commands. If STPFORWARD is

enabled, and there is no enabled STP instance, then the switch will

forward all received BPDUs. If STPFORWARD is enabled, and an STP

instance is enabled, then STPFORWARD will be disabled by default and

a message will be generated.

•

The SHOW SWITCH command now shows the status of the BPDU

Forwarding feature.

PCR: 03401

Module: SWI

An enhancement has been made to the Test module to optimise the

reception of the loopbacked packets that are used to confirm operation of

the switch ports.

Features in SB251-06

Patch file details are listed in T a ble 3.

Table 3: Patch file details for Patch SB251-06.

sb-251.rez

Base Software Release File

Patch Release Date

10-Apr-2003

sb251-07.paz

79684 bytes

Compressed Patch File Name

Compressed Patch File Size

Patch SB251-06 includes all issues resolved and enhancements released in

previous patches for Software Release 2.5.1, and the following enhancements:

PCR: 03340

Module: SWI, SYSR

Level: 1

After a power cycle, or a reboot command, the SwitchBlade would

occasionally repeatedly restart if it had two active controller cards. Also, the

Slave controller card would sometimes not take over if the Master controller

card failed.

Features in SB251-05

Patch file details are listed in T a ble 4.

Table 4: Patch file details for Patch SB251-05.

sb-251.rez

Base Software Release File

Patch Release Date

31-Mar-2003

sb251-05.paz

71096 bytes

Compressed Patch File Name

Compressed Patch File Size

Patch SB251-08 for Software Release 2.5.1

C613-10361-00 REV H

Download from Www.Somanuals.com. All Manuals Search And Download.

Patch SB251-08 For SwitchBlade 4000 Series Switches and AT-9800 Series Switches

Patch SB251-05 includes all issues resolved and enhancements released in

previous patches for Software Release 2.5.1, and the following enhancements:

PCR: 03281

Module: SWI

Level: 2

Specifying the PORT and SPEED parameters with the CREATE SWITCH

TRUNK command did not set ports in a trunk group to advertise the correct

trunk group speed and duplex mode. This issue has been resolved.

PCR: 03313

Module: SWI

Level: 1

A power cycle on the switch could cause the console port to become frozen

if a port was in a link up state. If a port went into a link down state, then the

console port became unfrozen. If RESTART REBOOT or RESTART

SWITCH commands were used, then the console port functioned correctly.

This issue has been resolved.

Features in SB251-04

Patch file details are listed in T a ble 5.

Table 5: Patch file details for Patch SB251-04.

sb-251.rez

Base Software Release File

Patch Release Date

24 -Mar-2003

sb251-04.paz

71112 bytes

Compressed Patch File Name

Compressed Patch File Size

Patch SB251-04 includes all issues resolved and enhancements released in

previous patches for Software Release 2.5.1, and the following enhancements:

PCR: 03226

Module: SWI

Level: 2

An internal misconfiguration of memory occurred when an M3 control card

and an M5 control card were installed, and the M3 control card was acting

as the Master. This could cause unexpected restarts. This issue has been

resolved.

PCR: 03228

Module: SWI

Level: 1

On a 48 port line card, or a 32F card, if Port 1 went down, or was

disconnected, then traffic on Port 13 was also stopped, and vice versa. The

same issue affected other pairs of ports. This issue has been resolved.

PCR: 03230

Module: SWI

Level: 2

Port speeds on trunk ports sometimes had to be set using the SET SWITCH

PORT command instead of automatically adopting the trunk group speed.

If a port was added to a trunk group and the port status was ‘up’, (that is, it

was correctly connected to another port) then the trunk group speed should

have applied to all the ports in the trunk, but it did not. Similarly, if a port

was added to a trunk group, and the port status was ‘down’, but it was later

linked correctly, then the trunk group speed should have applied to the

ports in the trunk. This issue has been resolved.

Patch SB251-08 for Software Release 2.5.1

C613-10361-00 REV H

Download from Www.Somanuals.com. All Manuals Search And Download.

Patch Release Note

PCR: 03243

Module: SWI

Level: 2

After autonegotiation had finished between two ports, the port on the

SwitchBlade would not show link up status when the SHOW SWITCH

PORT command was executed. The autonegotiation process is now

restarted if autonegotiation is completed and the link is shown as down.

PCR: 03249

Module: SWI

Level: 4

The LEDs on line cards now continue to flash when activity exists.

Previously if a cable was connected and disconnected to Line 48 and G8

ports, with traffic being transmitted from the other end, then the LED

would stop flashing, even when there was activity on the link.

Features in SB251-03

Patch file details are listed in T a ble 6.

Table 6: Patch file details for Patch SB251-03.

sb-251.rez

Base Software Release File

Patch Release Date

12-Mar-2003

sb251-03.paz

68784 bytes

Compressed Patch File Name

Compressed Patch File Size

Patch SB251-03 includes all issues resolved and enhancements released in

previous patches for Software Release 2.5.1, and the following enhancements:

PCR: 02361

Module: SWI

Level: 4

The SwitchBlade mirror port field on the second instance of a switch chip

was displaying as though it was the first instance. For example, if 2.26 was

configured as the mirror port, the GUI mirror object would return 2.2. The

first chip instance was not affected. This issue has been resolved.

PCR: 02527

Module: TCP

Level:3

TCP6 did not send a TCP Reset message under some circumstances, for

example when the Telnet server was disabled. This issue has been resolved.

PCR: 03025

Module: GUI

Level:2

A buffer address was incrementing and not returning buffers for reuse

when the command line interface was accessed via the GUI interface. This

issue has been resolved.

PCR: 03055

Module: SWI

Level: 4

If the SET SWITCH BLADE command was executed with the default

settings, then the default settings were added to the configuration file. The

SET SWITCH BLADE settings are now only added to the configuration file

if they differ from the default settings.

Patch SB251-08 for Software Release 2.5.1

C613-10361-00 REV H

Download from Www.Somanuals.com. All Manuals Search And Download.

Patch SB251-08 For SwitchBlade 4000 Series Switches and AT-9800 Series Switches

PCR: 03060

Module: CORE, SWI

Level: 3

Support has been added, to the MIB-2 interface MIB, for the port interface.

This means that port counters can now be shown.

PCR: 03066

Module: SWI

Level: 2

If a hardware filter was added to the switch, with a source VLAN and a

destination port of 1, then a host connected to the switch could not PING a

host on a different port. This issue has been resolved.

PCR: 03071

Module: CORE

Level: 2

An unexpected restart that occurred when upgrading a SwitchBlade from

Release 2.4.4 to Release 2.5.1 was caused by NVS generating an SNMP trap.

This issue has been resolved.

PCR: 03079

Module: IPG, SWI

Level: 1

Static routes were occasionally not added to all hardware tables across all

instances. This would affect connectivity if an instance had a default route

added to its table that pointed out one of its ports. This issue has been

resolved.

PCR: 03088

Module: SWI

Level: 2

Ports could not be added to the default VLAN after a hotswap, if the default

VLAN was Protocol, Subnet, MAC address, or Limited protocol based. This

issue has been resolved.

PCR: 03105

Module: FIREWALL

Level: 3

Incorrect handling of TCP sessions, and poor load balancing performance

could be caused by TCP virtual balancers not selecting a new resource if

required. This issue has been resolved.

PCR: 03112

Module: IPV6

Level: 3

The ADD IPV6 ND command now has a PORT parameter which means that

it can be associated with the VLAN parameter.

PCR: 03118

Module: CORE

Level: 4

Changes have been made to the SysDescription.

PCR: 03119

Module: CLASSIFIER

Level: 4

TCP source and TCP destination ports were swapped when viewed in the

GUI. This issue has been resolved.

PCR: 03138

Module: SWI

L evel: 2

Packets that were sent out a default route could have an incorrect source IP

address, if the interface route to the destination IP address existed but was

down. This issue has been resolved.

PCR: 03141

Module: IPG

Level: 3

Packets could be sent with an incorrect source address if a route was added

to a VLAN and another VLAN had an IP interface configured that was in

the same subnet as the route. This issue has been resolved.

Patch SB251-08 for Software Release 2.5.1

C613-10361-00 REV H

Download from Www.Somanuals.com. All Manuals Search And Download.

Patch Release Note

PCR: 03142

Module: SWI

Level: 1

If a BIST was run at low temperatures, for example 5 or 10 degress celcius,

on a G8 card, then a watchdog timer restart could occur. The switch now

checks for the real course of the external interrupts that occur when running

BIST.

PCR: 03148

Module: IPG

Level: 3

If the Gratuitous ARP feature was enabled on an IP interface, and an ARP

packet arrived, (either ARP request, or reply) that had a Target IP address

that was equal to the SenderIP address, then the ARP cache was not

updated with the ARP packet’s source data. This issue has been resolved.

PCR: 03191

Module: SWI

Level: 1

If two line cards were inserted in quick succession, then a software restart

could occasionally occur. This issue has been resolved.

PCR: 03192

Module: SWI

Level: 2

When the Built-In Self Test was run, a fault would occasionally be reported

which said that a MAC address was not learnt during the loopback test.

The ports in the BIST loopback test now remain in loopback.

Features in SB251-02

Table 7: Patch file details for Patch SB251-02.

sb-251.rez

Base Software Release File

Patch Release Date

25-Jan-2003

sb251-02.paz

48608 bytes

Compressed Patch File Name

Compressed Patch File Size

Patch SB251-02 includes all issues resolved and enhancements released in

previous patches for Software Release 2.5.1, and the following enhancements:

PCR: 02553

Module: SWITCH

Network affecting: No

64 bit MIB counters were not incremented or cleared for port interfaces. This

issue has been resolved.

PCR: 02574

Module: DVMRP

Network affecting: No

Some change actions, and the resending of prune messages were not

operating correctly. This issue has been resolved.

PCR: 02582

Module: SWI

Network affecting: No

Pause flow control is now disabled by default on all ports. This improves

performance of the switch when it is congested.

The DPORT parameter in the ADD SWITCH HWFILTER command was

omitted when the configuration was generated. This issue has been

resolved.

Patch SB251-08 for Software Release 2.5.1

C613-10361-00 REV H

Download from Www.Somanuals.com. All Manuals Search And Download.

Patch SB251-08 For SwitchBlade 4000 Series Switches and AT-9800 Series Switches

PCR: 03023

Module: SWI

Network affecting: No

The SET SWITCH PORT ACCEPTABLE command did not work correctly

on all specified port numbers. This issue has been resolved.

PCR: 03028

Module: SWI

Network affecting: No

A warning message was generated when a slave line card was not

initialised, and the configuration script was not loaded. This issue has been

resolved.

PCR: 03030

Module: SWI

Network affecting: No

RIP was not operating correctly because a MAC address search returned the

wrong port number. This issue has been resolved.

PCR: 03031

Module: FIREWALL

Network affecting: No

The ADD FIREWALL POLICY RULE command included an erroneous

check on port ranges for non-NAT rules. This check is now restricted to

NAT rules.

PCR: 03034

Module: SWI

Network affecting: No

Executing the SET IP INTERFACE and SET IPX INTERFACE commands on

a SwitchBlade produced debugging output on the ASYN port. This issue

has been resolved.

PCR: 03037

Module: QOS

Network affecting: No

A new value is now shown in the output of the SHOW QOS POLICY

command. This is the value of the port bandwidth used when the default

traffic class percentage bandwidth is set on a QoS Policy.

PCR: 03039

Module: SWITCH, IPG

Network affecting: No

Adding a layer 2 filter on a SwitchBlade did not block traffic to the end host

as intended. This issue has been resolved.

PCR: 03043

Module: SWITCH

Network affecting: No

On a SwitchBlade, PCI errors occurred periodically after a line card was

hotswapped. This issue has been resolved.

PCR: 03047

Module: CORE

Network affecting: No

The board revision number for the slave control blade was erroneously set

to the same number as the master control blade. This issue has been

resolved.

PCR: 03428

Module: STP

Network affecting: No

If a port belongs to an enabled STP instance, but the port has been disabled

from STP operation with the DISABLE STP PORT command, the port will

not respond to ARP requests. This patch implements a workaround that

allows disabled STP ports to respond to ARP requests.

Patch SB251-08 for Software Release 2.5.1

C613-10361-00 REV H

Download from Www.Somanuals.com. All Manuals Search And Download.

Patch Release Note

Features in SB251-01

Patch file details are listed in T a ble 8:

Table 8: Patch file details for Patch SB251-01.

sb-251.rez

Base Software Release File

Patch Release Date

15-Jan-2003

sb251-01.paz

71828 bytes

Compressed Patch File Name

Compressed Patch File Size

PCR: 02555

Module: SWI

Network affecting: No

Layer 2 filtering is now working correctly.

PCR: 02561

Module: SWI

32 bit counters now only show 8 bit contents.

PCR: 02563

Module: SWI

The IPM (Layer 3 Multicasting table) now updates correctly to add or delete

the ingress linecard to control blade ports, and the control blade to egress

linecard ports when updating forwarding.

PCR: 02568

Module: CORE

Network affecting: No

The ENABLE SYSTEM SECURITY_MODE command was enabling the

system security mode, but after the switch was restarted the system security

mode was disabled again. Also, when NVS was re-initialised because, for

example a battery had been exhausted, the system could not make an SNMP

trap. These issues have been resolved.

PCR: 02576

Module: SWI

Network affecting: No

When the DISABLE SWITCH PORT FLOW=PAUSE command was

executed on a port or ports, they would still appear to be enabled at a higher

level. This issue has been resolved.

PCR: 02396

Module: DHCP

Network affecting: No

DHCP RENEW request messages are now unicast (as defined in the RFC),

not broadcast.

PCR: 02575

Module: SWI

Network affecting: No

VLAN tagged multicast packets were incorrectly being sent over untagged

VLAN interfaces. This issue has been resolved.

PCR: 02574

Module: DVMRP

Network affecting: No

Some change actions, and the resending of prune messages were not

operating correctly. This issue has been resolved.

PCR: 02582

Module: SWI

Network affecting: No

Pause flow control is now disabled by default on all ports. This improves

performance of the switch when it is congested.

Patch SB251-08 for Software Release 2.5.1

C613-10361-00 REV H

Download from Www.Somanuals.com. All Manuals Search And Download.

Patch SB251-08 For SwitchBlade 4000 Series Switches and AT-9800 Series Switches

PCR: 02587

Module: OSPF

Network affecting: No

When OSPF was enabled on startup, an OSPF interface would sometimes

stay in the DOWN state. This issue has been resolved.

PCR: 03001

Module: SWI CLASSIFIER

Network affecting: No

The following parameters have been changed CREATE CLASSIFIER, SET

CLASSIFIER and SHOW CLASSIFIER commands:

•

The MACTYPE parameter has been changed to

MACTYPE={L2UCAST|L2MCAST|L2BCAST|ANY}. This resolves

an error with internal hardware tables.

•

The number of user-specified protocols in the PROTOCOL parameter

has been increased from three to seven.

The minimum value of the IPXDADDRESS parameter has been

decreased from 10000000 to 00000001.

PCR: 03006

Module: SWI

Network affecting: No

An issue which sometimes resulted in a broadcast storm within the internal

ports on the SwitchBlade, a reduction in bandwidth, and a loss of pinging

has been resolved.

PCR: 3008

Module: SWI

Network affecting: No

An issue which caused pings to fail when a control card was inserted in the

left hand slot to act as a slave, has been resolved.

PCR: 03014

Module: IPG, SWI

Network affecting: No

Support has been added to allow for multicasting to any number of

overlapping VLANs up to the maximum number of multicast forwarding

entries.

PCR: 03018

Module: SWI

Network affecting: No

An issue with pings failing after network host routes disappeared from the

switch due to an IP hashing error has been resolved.

PCR: 03020

Module: SWI

Network affecting: No

An issue with an interrupt occurring when waiting on the MDIO which

caused the MDIO to read or write incorrect information has been resolved.

PCR: 03021

Module: SWI

Network affecting: No

Ping would sometimes not work correctly after a 48 line card was extracted,

and after a restart reboot. This issue has been resolved.

Availability

Patches can be downloaded from the Software Updates area of the Allied

Telesyn web site at www.alliedtelesyn.co.nz/support/updates/patches.html. A

licence or password is not required to use a patch.

Patch SB251-08 for Software Release 2.5.1

C613-10361-00 REV H

Download from Www.Somanuals.com. All Manuals Search And Download.

Patch Release Note

Patch SB251-08 for Software Release 2.5.1

C613-10361-00 REV H

Download from Www.Somanuals.com. All Manuals Search And Download.

3D Innovations Network Cables H 182 ENG2 User Manual
A4 Tech Camcorder PK 35N User Manual
ADTRAN Network Card PSD 239 H2R User Manual
AEG Microwave Oven MC1753E User Manual
Agilent Technologies Ventilation Hood 31A User Manual
AMX Universal Remote Mio Modero R 4 User Manual
Anaheimr DPJ72LC2 User Manual
BC Speakers Speaker 12NW100 User Manual
Behringer DJ Equipment V AMP 3 User Manual
Beko Freezer BK 8182 User Manual