Akros Aquatherm Wheelchair AQTF 2035 User Manual

TENDERFLO
®
WATER OVERLAY  
ITEM AQTF-2035  
TENDERFLO
®
II WATER CUSHION  
ITEM AQTF-3013  
Before you begin:  
Please read these instructions before using your Tenderflo product. ese instructions contain information that will  
aid you in achieving maximum therapeutic results.  
Important Safety precautions:  
Note: Before you fill your Tenderflo product with water, read the following safety precautions:  
Do not overfill. Overfilling could cause excessive stress to the mattress and/or seam leakage. Fill the overlay or  
cushion with only enough water so that the patients body does not depress the top of the mattress enough to  
touch the bottom. Overfilling lessens pressure relief.  
Caution: Avoid puncture. Keep pins and other sharp instruments away from the Tenderflo.  
WARNING: Do not fill the Tenderflo with hot water. It could cause personal injury and/or damage  
the Tenderflo. Use warm water, approximately 98-99° F or 36-37°C, only.  
WARNING: This product has a maximum weight capacity of: Item AQTF-2035: 225 lbs.  
Item AQTF-3013: 250 lbs.  
Set-up  
Unfold the Tenderflo overlay or cushion.  
Overlay: Place overlay on either a conventional or hospital mattress, with the fill valve facing up and visible at  
the foot of the bed.  
Cushion:
Place cushion on a wheelchair.  
Filling  
Note: Do not fill Tenderflo while patient is on surface.  
1. Unscrew and remove the fill valve cap.  
Holding the base of the fill valve, insert  
your finger into the opening and pull the  
valve to its raised position.  
2. Locate a nearby faucet to obtain warm water, approximately 98-99° F, 36-37° C.  
3. Connect one end of a standard garden hose to the faucet. Screw the female end of the garden hose into the  
T
e
nderflo’s male fill valve.  
4. Gently turn on the warm water. Do not leave the Tenderflo unattended. Hold overlay end upright until wa-  
ter level reaches filling line. Adding more or less water will change pressure relief depending upon the patient’s  
weight and bone structure.  
5.
T
u
rn
 
off the water when desired level has been reached. Do not overfill.  
Caution: If you accidentally overfill this Tenderflo product, drain out the excess water immediately.  
6. Mark
 
date filled.  
7. Screw the fill valve cap back onto the fill valve.  
Caution: Ensure that fill valve cap is securely tightened. Crossed threads could result in leakage. Gently push  
the cap downward to the recessed position.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Digital Camera iCV 01a User Manual
3Com Gas Grill PE420N User Manual
3M Food Saver 800a3 User Manual
Abocom Switch LF560MX User Manual
Access Microscope Magnifier IOD 144 User Manual
Alamo Lawn Mower ST10 User Manual
American Dryer Corp Clothes Dryer ADG 320D User Manual
Behringer Musical Instrument DSP2024P User Manual
Behringer Stereo Amplifier BB810 User Manual
BK Stereo Amplifier AV2500 Series II User Manual